CNC controlled, semi-automatic and 1-axis-controlled pipe bending machines, pipe end forming machines, assembly machines for hydraulic tubing, measuring devices, system and software solutions for piping

Our system competence for your success

TRACTO-TECHNIK

TRACTO-TECHNIK

W h a t d e v e l o p e d f r o m m o d e s t b e g i n n i n g s

W i t h g o o d i d e a s a n d p r a c t i c e - o r i e n t e d

s o l u t i o n s s t r a i g h t t o t h e t o p

TRACTO-TECHNIK (TT), based in Lennestadt / Germany, was founded by Dipl.-Ing. Paul Schmidt in 1962. At the begin-

ning, a rented garage accommodated work places for fabricating ramming rigs and the machines needed for pulling

out drill rods and trench sheeting.

The debut in pipe forming techniques was made in 1967 with the development of the universal hydraulic tube proces-

sing machine TUBOMAT, which soon lead to TUBOMAT becoming a comprehensive product line. Beside the CNC, semi-

automatic and 1-axis controlled pipe bending machines, the product range also covers pipe end forming machines, pipe

measuring systems, software solutions and IT services as well as individual and system solutions for special branches

and applications.

Parallel to this development, the GRUNDOMAT soil displacement hammer captured the market for trenchless pipe

installation techniques and became a basic model for numerous steerable and non-steerable drilling systems. Today,

TT is a specialist for trenchless pipe installation and pipe forming techniques and belongs to the technology leaders in

both branches.

Company division “pipe fabrication”:

pipe bending and working machines, measuring

devices, special machines and system solutions.

� /

3 T

ra

CTo

-TeC

hn

ikT r a C T o - T e C h n i k G r o u p o f C o m p a n i e s

Lennestadt-oedingen in the German Sauerland.

Pipe bending and processing systems are

developed and fabricated in Plant �

of the TraCTo-TeChnik company.

Company division „trenchless pipe laying“:

steerable and non steerable boring & drilling systems.

SoftwareDevelopment: PiPeFaB software

solutions for efficient piping.

In an attempt to offer complete and practice-oriented high-efficiency system solutions, TT started the TRACTO-TECHNIK Software Deve-

lopment several years ago. Known by its label PIPEFAB, this branch develops multi-system software products for pipe processing. „All

you need from one source“ is the slogan. Simultaneous development of machine technology and software solutions has turned TRACTO-

TECHNIK into a competent contact point for all questions concerning pipe processing.

The innovative family enterprise, dedicated to future progress, presents itself as a global player of our time. More than 500 qualified and

motivated employees at the industrial locations, service branches and subsidiary enterprises as well as an international tightly woven

network of suppliers provide the local proximity to the customer, while maintaining the global range of the company at the same time.

With over 300 valid patents, TRACTO-TECHNIK is considered to be one of the Hidden Champions (named after a book with this title,

written by Prof. Hermann Simon) and has been nominated several times for the circle of the most innovative of the medium-sized Ger-

man enterprises, the “TOP 100”.

4 /

5 T

ra

CTo

-TeC

hn

ikP roduct ion engineer ing

Design of the bending machines with

latest 3D CaD techniques.

C o m p e t e n c e i n d e v e l o p m e n t a n d p r o d u c t i o n

Q u a l i t y a n d r e l i a b i l i t y „ M a d e i n G e r m a n y “

Product quality has the highest priority for TRACTO-TECHNIK. That is also the reason why development and design,

fabrication and assembly consequently stem from one and the same source. This concept allows short development

periods and optimised production engineering processes, while maintaining the highest quality standards.

With the help of the most modern production ma-

chines and processing centres, our qualified and

motivated staff members assure the utmost amount of

flexibility and supply reliability which has become the

benchmark of entrepreneurial action for the TRACTO-

TECHNIK company.

First class quality in development, fabrication and

assembly guarantees technological top products of

high reliability and long service life. It can hardly be

a coincidence when a customer sends his TUBOMAT

pipe processing machine to TRACTO-TECHNIK for over-

hauling - after more than 25 service years.

With TRACTO-TECHNIK pipe bending machines, all materials with good cold forming

properties (i.e. steel, stainless steel, copper, aluminium, brass, CuNiFe, ...) in varying

cross-section shapes can be processed safely and precisely. This includes round,

square and oval pipes as well as open profiles, flat or solid bar material.

Finding solutions for customer-specific problems and demands is our specialty.

Within the bounds of prototyping, the bending tools are constructed, worked and

tested in practice, optimised for their future tasks. We achieve process-capable for-

ming as a result.

Wiper dies for bending

thin-walled pipes

without wrinkling.

Special bending mandrels

for pipes with

rectangular cross-sections.

Ball mandrel and multiple

ball mandrel for bending

pipes with tight radii.

Bend die with exchange-

able clamping insert.

in-house production of the bending tools at

TraCTo-TeChnik.

6 /

7 T

ra

CTo

-TeC

hn

ik

The TUBoTron �0 CnC pipe bender is also available with

multi-radii capability and right-left bending head.

CnC Pipe Bending Machines

P r o d u c t i v e , i n n o v a t i v e , p r e c i s e a n d a b s o l u t e l y r e l i a b l e

C n C p i p e b e n d i n g m a c h i n e s : T U B o T r o n

The CNC controlled pipe bending machines of the TUBOTRON product line fulfill the highest demands on quality regar-

ding design, performance and fabrication. They present the perfect solution for the serial production or flexible single

production of pipe bending parts. All functions are automated and the axes speeds can be programmed freely.

The bending machines have a free-standing bending head for maximum liberty of action in process, thus allowing the

production of intricate pipe shapes. Depending on the machine type, tubes & pipes with an outside diameter between

4 and 170 mm can be bent at present, economically and fully automated.

Up-to-date control technique from SIEMENS makes sure that the work pieces are finished with precision and minimal

throughput times. The operator merely has to insert the straight pipe into the machine, start the bending program and

take the ready-bent pipe shape out of the machine again.

TUBoTron �5 TUBoTron 30

A tele-service interface makes way for remote maintenance of the machine control via the internet by the experts of

TRACTO-TECHNIK. Therefore, the pipe bending machine is always up-to-date in terms of the latest technology; should

any kind of problem occur, you have the complete experience and know-how of our employees to back you up at short

notice – all over the world.

On request, the TUBOTRON pipe bending machines can be provided with a multi-radii bending facility. It allows the pro-

duction of pipe shapes with bend-in-bend runs, forming of different radii to a single pipe or bending pipes of differing

diameters without having to exchange tools.

In order to secure the bending area during automatic production, a complex assortment of security systems is available.

We can offer you the whole spectrum of modern accident prevention technology including laser scanners, protection

hoods, safety-switch mats, cable-controlled safety devices and photo-electric barriers or even complete safety-fencing.

The TUBoTron 170 is TT’ s most powerful CnC pipe bender

at present.

TUBoTron 50 TUBoTron 90

TUBoTron 30 Mr with automatic

feeding and unloading.

TUBoTron �0 rL with automatic

feeding and unloading.

8 /

9 T

ra

CTo

-TeC

hn

ik

a u t o m a t i c B e n d i n g C e n t e r s

Wo r k c e l l i n t e g r a t i o n

h igher product iv i ty due to automat izat ion

TRACTO-TECHNIK has developed different system solutions, flexibly adapted and cut to size to optimise all kinds of

applications. With its maximum degree of automation, the pipe bending centre produces almost operator-free – the only

manual tasks remaining are to fill up the pipe storage and to remove the final bent work pieces.

First the pipes are singled out from the pipe storage and precisely aligned lengthwise. A welded seam detection system,

with rotational alignment of the pipes, can be added as an option. Depending on the necessity of using a bending man-

drel or not, the unprocessed pipe is fed into the machine from the front or the side with a matching grappler system. As

soon as the pipe has been bent, it is deposited in a collecting container or laid down with the help of a grappler system,

while the next pipe is already waiting, ready to be fed into the machine.

Feeding and unloading of the pipes are

individually adapted and optimised for

the respective application.

TUBoTron 30 mandrel bending machine with

portal system for automatic feeding and unloading.

With LiSa the bending result can be measured

and documented online.

Q u a l i t y a s s u r a n c e i n t e g r a t e d w i t h p i p e b e n d i n g

L iSa : Laser in -S i tu angular Measurement

With the optical measuring system LISA, quality assurance of pipe bending is already integrated in the bending machine and the

running production process.

Accompanying the work process, every single pipe bend or every nth construction part is examined on tolerance observance while

the bending results are recorded. Feedback to the machine control allows process control due to flexible adaptation of the bending

parameters in the course of production (i.e. during load change).

The measuring precision in practice is performed better than ± 0,1°. LISA builds on a very small scale, and measuring/evaluation takes

only fractions of a second to complete. The measuring and evaluation software can be installed directly in the control computer of the

pipe bending machine. Beside the module for determining bending results it also contains calibrating and diagnosis functions.

10 /

11

Tr

aC

To-T

eCh

nik

1 - a x i s - C o n t r o l l e d & S e m i - a u t o m a t i c P i p e B e n d e r s

T h e r e i s n o t a l w a y s t h e n e e d f o r C n C

S i n g l e - a x i s - c o n t r o l l e d a n d s e m i - a u t o m a t i c

P i p e b e n d i n g m a c h i n e s : T U B o B e n D

The bending function of the pipe bending machines of the TUBOBEND model range runs automatically while pipe

feed and rotation between two bends are carried out manually. In the first instance, these machines are applied

for the single or small batch production of pipe bending parts as well as for maintenance works. According to

machine type, pipes up to 140 mm Ø can be worked.

The free-standing bending head gives the bending machine

all the space it needs for bending complicated pipe shapes. A

plane of bend device as well as length stops simplify the work

for small batch production because the pipe can be exactly

fastened to the start position for the next bend.

The new control concept enables simple and comfortable

menu-driven operation via a SIEMENS touch panel. Here you

can lodge 20 bending programs with 20 bending steps each.

A further asset: bending data from our pipe bending software

PIPEFAB B can be transferred to the machine control directly.

The TUBoBenD 48 can be equipped with different

optional devices.

TUBoBenD �0

TUBoBenD 30

The TUBOBEND 42 and 48 are the true all-rounders within the TUBO-

BEND model range. These machines can be flexibly suited to every

kind of application case because they can be provided with debur-

ring, cutting ring assembly, pipe flaring and chamfering functions.

The TUBOBEND 50, 80, 90 and 120 are also available as semi-au-

tomatic pipe bending machines. In that case the bending machines

are equipped with fixing brakes for longitudinal and torsional po-

sitioning of the pipe. Due to their powerful bending drive and the

numerous equipping possibilities, these machines are well suited for

bending pipes with thick walls as well as for pipes with thin walls

if a mandrel is used. In addition to this, the TUBOBEND 80 is also

available in an L-version for more simplified bending applications.

Plane-of-bend device and length

measuring system with collet chuck.

TUBoBenD 90.

TUBoBenD 80L

TUBoBenD 80

TUBoBenD 50

The TUBoMaT 64� perfectly manages all

steps of hydraulic tubing.

1� /

13

Tr

aC

To-T

eCh

nik

h y d r a u l i c Tu b i n g

TUBOMAT 648

C o m p l e t e a n d p r o o f p r o c e s s i n g o f h y d r a u l i c t u b e s

The pro for hydraul i c tub ing : TUBoMaT Pre-condition for a reliably functioning hydraulic system without leakage loss is the equally reliable processing and

assembly of all pipes and components. Meanwhile, TRACTO-TECHNIK has been developing professional and workable

solutions for hydraulic pipe-work for four decades and offers the different processing functions individually in form

of compact table top units or integrated in the TUBOMAT pipe processing centre.

With the TUBOMAT 642 and 648, TRACTO-TECHNIK offers two real all-round professional solutions for hydraulic as-

sembly concerns. The mobile and flexibly applicable pipe processing centre for pipes and tubes with outer diameters

from 6 to 42 (resp. 48) mm manages the complete hydraulic tube processing spectrum from sawing and deburring to

bending and also integrates pipe flaring, cutting ring assembly or chamfering functions. This assembly pro is extre-

mely robust, easy to operate and absolutely reliable.

Since its development 40 years ago, the TUBoMaT has

proven its own value as a universal pipe processing

machine over a thousand times all over the world,

thus turning into an indispensable assistant in pipe

production for many enterprises.

Cutting ring assembly.

All single processing functions are also available from TRACTO-TECHNIK in the form of small and compact high-performance machines.

Clean deburring is carried out by the TUBOGRAT. It is sufficient to press the sawed off pipe ends against the special pipe milling cutter

and within seconds the pipes are absolutely free of burrs.

TT provides individual assembly devices for the two methods of safe hydraulic component connection, flared or cutting-ring fittings.

TRACTOPRESS is a superior solution for quick and fault-free cutting ring assembly – the specific assembly pressure for every pipe

diameter is set up automatically with the application of the corresponding tool.

The combined assembly machine VARIOMAT performs cutting-ring assembly and also flares the ends of the pipe. A change of the two

functions is performed in a matter of seconds, therefore this device is particularly suitable for applying both fitting methods.

Sawing function. Deburring, Flaring, Cutting ring assembly:

TUBoGraT, VarioMaT, TraCToPreSS

e a s y b e n d i n g o f t h i c k - w a l l e d p i p e s

r a m b e n d i n g m a c h i n e s : P B 4 � ( P L U S )

The press bending method is suitable for simple bending processes and thick-walled pipes. As pipes are bent without

mandrel or wiper die, bending radii of approx. 3 x D and higher can be performed. With the PB 42 and the PB 42 plus,

TRACTO-TECHNIK offers two mobile and flexible bending machines for pipes with outer diameters up to 42 mm.

The desired bending angle can be exactly adjusted via limit switch for the cylinder stroke. A plug-in type tool system

allows short setup times. The PB 42 plus is equipped with internal and external deburrers as well as an universal seating

device which allows adding on a flaring unit or a cutting ring assembly unit optionally.

14 /

15

Tr

aC

To-T

eCh

nik

r a m B e n d i n g / P i p e e n d F o r m i n g

PB 42

During the bending process the ram die, which describes the radius,

is pressed together with the pipe against two counter-rolls,

forcing the pipe to bend around the ram die.

PB 42 PlUs

a l l t h i n g s h a v e a n e n d i n g , b u t t h e p i p e h a s t w o

P i p e e n d f o r m i n g m a c h i n e s : T U B o F o r M

The TUBOFORM model range offers multiple possibilities for the processing of pipe ends, they can be formed either axially or in a

radial process, for instance:

• expanding • reducing • end sizing • flanging • bead forming

• bevelling • notching • curling • flaring • contour forming

When the axial method is applied, the forming tools are moved lengthwise to the pipe, thus forming the pipe end while the pipe

itself is held with clamping jaws. Depending on the forming tools, you can produce a large variety of different high-precision pipe

geometries with the TUBOFORM A.

When radial forming is applied, the pipe end is formed by

means of spreading or pulling-in segments. The pipe itself is

held by hand or by means of simple facilities for this method.

The TUBOFORM RS is equipped with one radially working for-

ming tool, it affects the pipe either from without or within. In

contrast to this mode of action, the TUBOFORM RM combines

two independent radially working tools.

The TUBoForM a for axial pipe end

forming up to Ø �5 mm.

PB 42 PlUs TUBOFORM Rs / RM

M e a s u r i n g S y s t e m s 16

/ 1

7 T

ra

CTo

-TeC

hn

ik

� D a n d 3 D, o p t i c a l a n d t a c t i l e , s t a n d a r d r a d i i a n d f r e e f o r m b e n d s …

M e a s u r i n g s y s t e m s f o r p i p e s :

T U B o S C a n , T U B o C o n T r o L

No matter what kind of pipes are going to be measured, whether they have single bends, complicated shapes with

standard radii or freeform bends: the pipe measuring systems from TRACTO-TECHNIK always deliver precise and reliable

results. With these, you can not only check the dimensional accuracy of bent pipes; by means of reverse engineering,

the geometry data can be directly transformed into production or pipe bending data.

The TUBOSCAN C and the TUBOSCAN M are two measuring arm systems which differ in relations to their hardware

components, the measuring method, the working range and their measuring precision. The TUBOSCAN C is available in

working ranges between 1.80 m and 3.60 m and can be equipped with diverse measuring sensors.

The small measuring arm TUBOSCAN M has a basic working range of 1.67 m, which

can easily be extended for measuring of pipe shapes that extend this working range

(“leapfrog function“). This measuring arm can be equipped with tactile measuring sen-

sors, a pipe measuring fork or a laser optic (ML) for comfortable, non-contacting pipe

measurement.

Measuring of freeform-bent pipes

with the TUBoSCan ML.

TUBoSCan C equipped with contact probes.

TUBoSCan ML

The TUBOSCAN STICK can work completely without the mechanical restrictions of a measuring arm. Based on the latest 3D

navigation technology, this measuring system allows mobile, cable-free, freehand definition and measurement of pipes and

add-on parts.

The core piece of all these measuring systems is the pipe-specific measuring

and evaluation software which will master even the most difficult of measuring

tasks. The lite version includes the basic measuring functions for pipes, wires

and hoses (i.e. measuring, calculating bending data, nominal/actual value

comparison...).

The full version integrates numerous additional features like pipe data import

from CAD systems (via IGES interface), automatic generation of sizing tools

and measurement of add-on parts. A design module for adapting pipe courses

and suitable interfaces for the online connection of pipe bending machines is

optionally available.

TT has developed the TUBOCONTROL measuring table for measuring angles

and lengths of two-dimensional pipe shapes. It is also excellent for the quick

and uncomplicated determination of the pipe’s springback after bending.

Measuring of pipes without any

mechanical restrictions – no problem

for the TUBoSCan STiCk.

Touchless measuring by means

of a pipe measuring fork.

TUBoConTroL pipe

measuring table.

CaD data are the base for every pipeline

installation.

assembly of the SCoPeLink measuring device

between the flanges.

18 /

19

Tr

aC

To-T

eCh

nik

Te m p l a t e P i p e P r o d u c t i o n

o n - s i t e m e a s u r e m e n t – p r o d u c t i o n i n t h e p i p e s h o p

a u t o m a t e d p r o d u c t i o n o f t e m p l a t e p i p e s :

S C o P e L i n k , r o B o F i X

Conventional template pipe assembly, from taking the measurements of the planned pipe connection to building

a model, handling the geometry data, fabricating the pipe and carrying out the final check of the fitting precision,

belong to the most time and cost consuming production sequences in shipbuilding and plant engineering.

With SCOPELINK and ROBOFIX, TRACTO-TECHNIK offers an economical

and at the same time highly precise automated complete solution for the

fabrication of template pipes. This world-wide unique system was specially

designed to optimise the process cycles of template pipe production.

Using the 3D isometric facilities of SCOPELINK, all geometry data relevant

for the finishing of the template pipe are precisely measured out and sto-

red on site. As next, the data can be directly sent to the pipe fabricating

workshop for further processing, for instance by using the internet. This

means you can start with the production of the template pipe almost at

once.

PIPEFAB

Jobsite

Pipe isometry Production data(e.g. bending parameters)

Flange position Positioning parameters

Not only the complete manufacturing data (i.e. bending data) but also the control data for the 3D positioning device ROBOFIX are

provided for the prefabrication of the template pipe. This system allows you to simulate the installation situation of the template

pipe in a highly precise manner, so the flanges can already be welded to the pipe in their correct and exactly fitting position in the

pipe workshop.

The template pipe leaves the pipe workshop in the highest possible prefabrication degree, all

that is left to do is the assembly on site. Due to the high system precision of both systems and the

possibility of carrying out a collision check straight away when the isometric is being generated,

the template pipes measured and produced with SCOPELINK and ROBOFIX can be perfectly fit

into the line system.

If needed, the working actions can be parallelised by applying several SCOPELINK systems. The

complete data are stored in a database for future use. Due to the possibility of transferring data

via the internet, the application of SCOPELINK and ROBOFIX presents no problems at all, in spite

of remote locations.

Within only 15 min. the SCoPeLink is

installed and the isometric data of the

pipe course are determined.

Using roBoFiX the flanges are

spot-welded to the pipe in the

workshop.

Pipe fabrication

Production data(e.g. bending parameters)

Positioning parameters

Template pipe

The completely prefabricated pipe is

inserted at perfect fit.

�0 /

�1

Tr

aC

To-T

eCh

nik

S o f t w a r e S o l u t i o n s

h i g h e r p r o d u c t i v i t y b y m e a n s o f d i g i t a l i n t e g r a t i o n

P i p i n g s o f t w a r e s o l u t i o n s : P i P e Fa B

Beside the achievements in machine engineering, TRACTO-TECHNIK develops efficient software solutions for pipe

processing and pipe line construction under its label and is therefore able to offer its customers

integral and optimally inter-coordinated system solutions with high applicability.

The modular build-up of the PIPEFAB production management software supports and integrates all areas of the service

life cycle of pipe lines, from engineering and construction, fabrication, assembly and operation to the maintenance of

pipe line systems.

PIPEFAB extricates the complete information needed for producing pipe lines from the pipe data. Data input is per-

formed either via PCF importer from various CAD systems or via the program-own isometric-generating tool. PIPEFAB

guarantees rapid and cost-optimised calculation of all production data, taking the pipe geometries and pipe materials

as well as the workshop and fabrication capacities into account.

PiPeFaB – efficient software tools for the

production management of pipe systems.

The production management software

PiPeFaB assures a continuous digital chain

for the complete life cycle of the pipe line.

Pipe bending software: isometric sketching and

dimensioning of the pipe figure, calculation of

the bending data, simulation.

Production management: automa-

tic generation of work plans and

production lists.

The software pack contains functions for generating spools and work pa-

ckages, the calculation of production times and costs, carrying out the

workflow control and data preparation for the weld seam documentation

or quality controls. PIPEFAB can address various NC processing machines

(i.e. pipe saws, bending machines...) directly via corresponding interfaces. In

combination with ERP / MRP systems, PDM systems and standard accoun-

ting systems, all data and isometrics required for project management and

control are provided.

PIPEFAB affords the optimisation of all work processes of pipe line construction and definitely leads to work, time and cost savings.

The software stands out for its easy-to-learn and application-friendly operation for the benefit of the user.

The pipe bending module PIPEFABB is not only an integrated compound of the complete PIPEFAB concept, it can also be applied

as a self-contained, machine-oriented pipe bending software. All functions for the generation of isometrics, calculation of sawing

lengths and bending data, collision control and data output or online data transmission to the pipe bending machine, are integrated.

�� /

�3

Tr

aC

To-T

eCh

nik

S e r v i c e

P a r t n e r s h i p – t h e c o n s o l i d a t e d p a t h t o s u c c e s s

C u s t o m e r s e r v i c e w i t h a d d e d v a l u e

TRACTO-TECHNIK sets great store by good service. This also involves developing

practice-oriented solutions in co-operation with our customers when special ap-

plication cases are not covered by the presently available machines or software.

Honest co-operation and a good partnership with our customers are the foundation

for constant customer’s satisfaction and a joint success.

The annual TT Forum ‘RohrBiegeTechnik’ (pipe bending technology) is a popular meeting place for users of pipe

forming technology from different lines of business. Listening to interesting theoretical-practical lectures and looking

at the accompanying machine and software presentations, the participants get all the news and information worth

knowing related to the pipe forming technology and have the chance to discuss their own experiences or problems.

Additionally, TRACTO-TECHNIK provides a leaflet covering the topic of pipe bending techniques. It contains all the

details concerning processes and phenomena occurring in the course of pipe bending.

Prototyping: customer demands are

transferred into tool geometries.

The “Pipe Bending Technology Forum” mediates

theoretical and practical know-how for users.

Current information can also be found

on the TraCTo-TeChnik website.

a t h o m e i n a l l l i n e s o f b u s i n e s s

re ference cus tomers o f the TT p ipe fo rming techn ique

ABB • Air Liquide • Airbus • Airedale • Aker • Alcan • Alfing Kessler • Alstom • Atlas Copco • Audi • BAE Systems • Bardella • BASF •

Bastuck • Bauer • Bayer • Benteler • BK Metall • Blohm+Voss • BMW • Boge • Bombardier • Bosch Rexroth • Buderus • Butting •

Car Trim • Case • Caterpillar • Compair • Controlmatic • DaimlerChrysler • Danfoss • Deguma • Die Bahn • Dieffenbacher • DSD Steel •

Essener Hochdruck Rohrleitungsbau • Engel • Eurotramp • Evobus • Fassmer • Faun • Fendt • Fiat • Fincantieri • Flender • Flensburger

Schiffbau-Gesellschaft • Frigotechnik • GEA Group • General Electrics • General Motors • Giggel • Gildemeister • Gillet • Grob Werke •

GS Hydro • Hansaflex • HDE Solutions • HDW • Heggemann • Hinsch • HTT Energy Systems • Hydac • Hyundai • Ingersoll • Interhydraulik

• Iveco • J.J. Sietas • Jungheinrich • Knaack & Jahn • Knoll • Knorr-Bremse • Krauss Maffei • Kremsmüller • Krones • Kroning • Kuka •

Kvaerner • Lauer • Leffer • Lefort • Legris • Liebherr • Linde • Lürssen • MAN • Maschinenfabrik Reinhausen • Merck • Metso • Metz •

Meyer Werft • Miele • Mitsubishi • Miwe • MTU • Müller Weingarten • NATO • Neoplan • O&K • Opel • Parker • Porsche • Renault •

Roche • Salvagnini • Schottel • Schuler • Schütte • Schütz • Sembawang Shipyard • Siemag • Siemens • Siempelkamp • Skoda • SMS

Demag • StarragHeckert • Still •TAE • Tenix • Tenneco • Thies • Thyssen Krupp • Ulstein • VA Tech • Valmet • Vattenfall • Voest Alpine •

Voith • Volkswagen • Volkswerft Stralsund • Volvo • Voss • Vossloh • Wacker • Wagon Pars • WMF • ZF Lenksysteme

For further information concerning TRACTO-TECHNIK products and services just go to our website http://www.tracto-technik.de.

Or come and visit our showroom and see the machines and software solutions on site. See for yourself, TRACTO-TECHNIK is

looking forward to your visit!

P r o d u c t o v e r v i e w

F i r s t c h o i c e f o r p e r f e c t p i p e f a b r i c a t i o n

T H E O N L Y C H O I C E F O R P E R F E C T P I P E I N S T A L L A T I O N S

TRACTO-TECHNIK GmbH & Co. KG Spez ia lmaschinenH u n o l d - R u m p - S t r . 7 6 - 8 0 • D - 5 7 3 6 8 L e n n e s t a d tTe l : +49 (0 ) 27 25 / 95 40 - 0 • Fax : +49 (0 ) 27 25 / 95 40 - 39www.t rac to - techn ik .de · E -Mai l : tubomat@trac to - techn ik .de

TUBoBenD

Single-axis-controlled & semi-automatic pipe benders

TUBoMaT

Assembly machines for hydraulic tubing

TUBoForM

Pipe end forming machines

SCoPeLink / roBoFiX

Automated fabrication of template pipes

PiPeFaB

Modular software solutions for pipe fabricationTUBoSCan / TUBoConTroL

Pipe measuring systems

TUBoGraT / TraCToPreSS / VarioMaT

Table top units for deburring, flaring and cutting ring assembly

TUBoTron

CNC pipe bending machines

PB 4� / 4� plus

Ram bending machines

E R S T E W A H L F Ü R P E R F E K T E R O H R V E R L E G U N G

TRACTO-TECHNIK GmbH • Hunold-Rump-Str. 76-80 • D-57368 LennestadtTel: +49 (0) 27 25 / 95 40 - 0 • Fax: +49 (0) 27 25 / 95 40 - 33www.tracto-technik.de · E-Mail: tubomat@tracto-technik.de