tpr catalog (pdf)

FIRST IN SERVICE

Miss

ion S

tate

men

tTPR First In Service

Mission stateMent

MISSION STATEMENT

“The Company exists solely to provide superior service with

the highest quality products and assist our people in achieving success!”

TRENCH PLATE® RENTAL CO Toll free: 800-821-4478

Trench Plate® Rental Co (TPR) has grown substantially since its early days of only providing Steel Plates from which we derived our name. We now provide a myriad of products including, Steel and Aluminum Boxes, Hydraulic Shoring, Shoring Beams, Traffic Control, Slide Rail Shoring Systems, Pipe Plugs, Confined Space Products and Competent Person, Flagger Training, and Confined Space Training. As well as in excess of 3000 products that we routinely provide to customers.

We provide solutions to thousands of job sites every year all over the Western United States, meeting the tough requirements of contractors, for both safety and productivity. With locations throughout California, Nevada and in Texas, we provide equipment for contractors in a major portion of the Western United States.

We offer full Temporary Traffic Control services, including Temporary Traffic Plans (both stamped by a PE or non stamped), Set-up and Removal of traffic control products on a customer’s job site, maintenance of set-ups, as well as installation of permanent signs many other services.

Through our subsidiary manufacturing company, Quik-Shor®, TPR has developed a full line of Hydraulic Shoring, Aluminum Boxes, Steel Boxes and other products as well. The company’s extensive product development program has ensured reliability and safety for our customers for a number of decades. In addition, TPR provides, “Competent Person Training Courses” and “Trench Rescue Training” to contractors and municipalities.

Our shoring product lines have withstood the test of time and use. Fulfilling the requirements of Contractors, Municipalities and OSHA on over one hundred thousand job sites throughout the world. Our employees are experts at providing the right equipment, delivered to your job site on your schedule, and assisting you with what you need to be successful.

TPR focuses on providing solutions to contractors for both standard and challenging situations encountered by our customers through our experience and the very highest quality of equipment.

SINCE 1979

TPR

TPR First In Service

www.tprco.com TPR history

E-mail: [email protected] TRENCH PLATE® RENTAL CO

LocationsTPR First In Service

Loca

tions

Los Angeles / Orange County 866-537-1260 Inland Empire 855-326-5953 San Leandro 855-351-1114

Traffic Control Speciality Locations

San Francisco North Bay Area800-321-5550

Los Angeles San Francisco South Bay Area800-821-4478 877-246-4086

North Los Angeles Sacramento877-246-4087 800-548-0688

Ventura / Santa Barbara Fresno - Central Valley855-834-9058 844-803-8408

Orange County Reno, NV800-772-8004 877-809-6492

Inland Empire Las Vegas, NV877-246-4085 877-809-6493

San Diego Houston, TX800-350-7528 866-247-9449


Trench Boxes Steel Trench Box 1-3Light Duty Steel Box 4Aluminum Quik-Box / Wheel Kit 5-6Aluminum Build A Box 7Manhole Boxes 8-10

Shoring Aluminum Hydraulic Shore 11High Clearance / Horizontal Waler 12Quik Pump / Power Pump / Rock & Finger Guard 13Trench End Brace 14Double Cylinder Power Shore / Screw Jack 153" Steel Cylinder Power Strut / Quadra Brace 16

Beams & Overlap Sheeting H-Pile & Wide Flange Beam / Over-Lap Sheeting 17-18

Slide Rail System Slide Rail System 19

Steel Plate Steel Plate / Rock Plate /Manhole Rounds / Curb Plate 20

Confined Space Entry Tripod / Winch / Harness 21Confined Space Definitions 22Hazardous Atmosphere 23Portable Gas Detector 24

Ventilation Equip. / Diesel & Electric Ventilator 25-26

Traffic Control Traffic Control Equipment 27Flashing Beacon Light 28Solar Arrow Panel / Solar Message Board 28Light Tower 29K-Rail / Water Filled Barrier 30Trench Bridge / Portable Road Bridge 31

Additional Products Pipe Deflection Gauge / Mechanical Pipe Plug 32Pipe Plug / Leak Locator 33Pipe Roller / Pipe Puller 34Rock Screen / Rock Box 35

Training Competent Person Training / Flagger Training 36

Temporary Traffic Control Diagrams & Symbols 37Shoring / Sloping & Benching 38

Los Angeles / Orange County 866-537-1260 Inland Empire 855-326-5953 San Leandro 855-351-1114

San Francisco North Bay Area800-321-5550

Los Angeles San Francisco South Bay Area800-821-4478 877-246-4086

North Los Angeles Sacramento877-246-4087 800-548-0688

Ventura / Santa Barbara Fresno - Central Valley855-834-9058 844-803-8408

Orange County Reno, NV800-772-8004 877-809-6492

Inland Empire Las Vegas, NV877-246-4085 877-809-6493

San Diego Houston, TX800-350-7528 866-247-9449

21

TPR First In Service contents

Pages


4THRevision - 1-2015

Contents

Trench Plate® Rental Co has the solution no matter what your application. We have a complete inventory of Trench Boxes, ranging from lightweight boxes for utility and general maintenance, to large boxes in 4 in, 6 in and 8 in thick walls designed for the deepest toughest projects.

Features: ► High strength steel construction► 4 lifting points built into sidewalls ► Pulling Eyes ► Adjustable and Stackable ► Compressed wood in top horizontal to limit bucket damage► Bottom horizontal protected by steel drag plate

Bore Pits

Arch Spreaders

Deep Applications

steeL trench BoxTPR First In Service

Stee

l Tre

nch B

ox1


Steel Trench Box

Our customers safely meet their deadlines using our knowledge and abilities to maximize productivity and safety.

Optional features:

► Fall Protection Guard Rails ► Wheel Kit► Box Walkway► Pulling Tongue► Grade Plate

Grade Plate

Steel Box Walkway

Pulling Tongue

SteeL trench Box TPR First In Service

www.tprco.com


Guard Rails

Steel Trench Box2

Steel Box Wheel Kit

Custom Sizes and Modifications Available Specifications May Vary

steeL trench BoxTPR First In Service

Box Size Pipe Clearance Approx. Lbs.4’ x 10’ 21” 3,471 6’ x 10’ 41” 4,2808’ x 10’ 64” 5,100

10’ x 10’ 85” 5,8004’ x 12’ 21” 4,0406’ x 12’ 41” 5,2508’ x 12’ 64” 6,600

10’ x 12’ 85” 8,4004’ x 16’ 21” 4,8006’ x 16’ 41” 6,5208’ x 16’ 64” 7,830

10’ x 16’ 85” 9,6504’ x 20’ 21” 5,7006’ x 20’ 41” 8,2508’ x 20’ 64” 9,690

10’ x 20’ 85” 11,4904’ x 24’ 21” 6,9806’ x 24’ 41” 8,8008’ x 24’ 64” 11,330

10’ x 24’ 85” 14,0704’ x 28’ 21” 9,6006’ x 28’ 41” 12,5708’ x 28’ 64” 16,430

10’ x 28’ 85” 19,5504’ x 32’ 21” 12,1006’ x 32’ 41” 16,050

10’ x 32’ 85” 25,3355” X 5” Square Spreaders 25 lbs. per foot

50 lbs. per foot8” Round Spreaders

Stee

l Tre

nch B

ox3


Light Duty steeL Box

Light Duty Steel BoxSize PSF Depth in C-60 Soil Approx. Lbs.

4’ x 14’ 1500 25 ft. 3,0606’ x 14’ 1500 25 ft. 4,2904’ x 16’ 1200 19 ft. 3,5206’ x 16’ 1140 19 ft. 4,8454’ x 18’ 960 15 ft. 3,8806’ x 18’ 960 15 ft. 5,280


www.tprco.com


Steel Trench Box4

Light Duty Steel Boxes are specifically designed for municipalities and utility contractors for the installation, repair and maintenance of water, sewer, and gas lines. Projects where rubber tire backhoes and small excavators are used.

Aluminum Quik-Boxes are manufactured by Quik-Shor® and make the perfect box for smaller projects where only a small excavator or rubber-tire backhoe is available.

Quik-Boxes are able to safely shore up to 20 feet in depth and easily allow for cross connections by use of the side doors.

► Hydraulic struts allow variable width

► Return springs protected by steel sleeves

► Light weight / Can be moved and installed by a rubber-tire backhoe ► Easily positioned

► Can be set up for three or four sided applications

► Boxes are stackable for greater depth

Optional Wheel KitFour Sided Configuration

aLuMinuM Quik-Box® By Quik-shor®


Variable Width

Alum

inum

Quik

-Box

®5


Quik-Shor®’s Power Pump makes the installation and removal of Hydraulic Boxes and Shores faster.

aLuMinuM Quik-Box® By Quik-shor®

Hydraulic Strut Sizes29” - 43” 47” - 77”35” - 53” 53” - 89”41” - 62” 75” - 117”

Extensions Available


www.tprco.com

Aluminum Quik-Box®

Size Approx. Lbs.

6’ x 6’ 1,4006’ x 8’ 1,5008’ x 8’ 1,6006’ x 10’ 1,7008’ x 10’ 1,90010’ x 10’ 2,8006’ x 12’ 1,9008’ x 12’ 2,000

6’ x 16’ 2,800PSF rating varies based on configuration, see

tabulated data


Aluminum

Quik Box ®6

With the MOD Series you can omit its bottom panels, for use on projects that involve T-connections and/or crossing utilities, when soil conditions permit.

aLuMinuM BuiLD a BoxTPR First In Service

Alum

inum

Build

A Bo

x7


Features:

► Smooth wall panel design► Foam filling – prevents soil and water buildup► Accepts telescoping spreaders (TS4 Spreaders)► 2-way corner posts allow, 2-, 3- or 4-sided configurations► Professional Engineer Certified to meet or exceed O.S.H.A. requirements

The MOD Series is a modular Aluminum Trench Shield system that is lightweight and easily transported via pickup truck. It can be used as a 2-, 3- or 4-sided system with existing components and can be changed on the fly at a job site to meet the job’s requirements.

Options:

► Wheel kits► Adjustable legs► Lifting eyes► Stacking units► Custom sizes

Quick and Easy Assembly

► High strength steel construction.

► Easy connecting pins and keepers for quick stacking.

► Large 48” doors allow cross connection of larger pipe.

► Box interiors are painted white to illuminate the working area.

ManhoLe Box By Quik-shor® TPR First In Service

www.tprco.com

Box Size Door Size Style Approx. Lbs.4’H x 8’L x 8’W Single Wall 1,4628’H x 8’L x 8’W 27”H x 36”W Single Wall 4,350

Box Size Door Size Style Approx. Lbs.4’H x 8’L x 8’W Double Wall 2,4058’H x 8’L x 8’W 40”H x 40”W Double Wall 4,8704’H x 10’L x 10’W Double Wall 3,2806’H x 10’L x 10’W 48”H x 48”W Double Wall 4,6708’H x 10’L x 10’W 48”H x 48”W Double Wall 6,180


Manhole Box8

two Piece ManhoLe Box By Quik-shor®


Box Size Double Wall Door Size Approx. Lbs.4’H x 8’L x 8’W 2” 2,4304’H x 10’L x 10’W 3” 3,5806’H x 10’L x 10’W 3” 48”H x 48”W 5,9008’H x 10’L x 10’W 3” 48”H x 48”W 5,1104’H x 12’L x 12’W 3” 3,7306’H x 12’L x 12’W 3” 48”H x 48”W 4,9808’H x 12’L x 12’W 3” 48”H x 48”W 6,740

Two Piece Manhole Boxes are versatile and accommodate a wide range of excavation sizes. Variable end openings allow larger cross connections. They can be used with spreaders up to 8’ long, creating end openings up to 8’ wide and 6’ tall or up to 8’ tall with the use of legs.

► Large 48” doors on the solid wall.

► Boxes are stackable for greater depth.

Two P

iece

Man

hole

Box

9


Manhole rounds are specially designed to protect personnel during manhole installations, line taps, valve placements and spot repairs. Their cylindrical construction incorporates high-strength corrugated steel walls.

Adjustable leg supports allow field adjustment of bottom clearance for incoming utilities, accommodating up to 52 inch pipe diameters when utilizing the cut-outs.

Light enough for handling with a rubber-tired backhoe, and easily stacked for varying depths.

Quick-connect pins and keepers enable rapid interlock of stacked Manhole rounds.

Boxes expand hydraulically to allow adjustments for excavation and manhole size.

Boxes can be stacked and multiple boxes can be placed in the excavation as a unit.

► Hydraulic Manhole Box

► Steel Round Manhole

Steel Round ManholeSize Approx. Lbs.

4’H x 8.5’ D 1,2008’H x 8.5’ D 1,7004’H x 10’ D 1,5004’H x 10’ D 3,100

Hydraulic Manhole BoxSize Approx. Lbs.

4’H x 8’ D 1,200

8’H x 8’ D 2,000

ManhoLe Box - rounDs & hyDrauLic TPR First In Service

www.tprco.com


Steel Round Manhole -Hydraulic 10

Rail Lengths 2’, 3½’, 5’, 7’, 9’, 12’, 16’, 20’, 24’

Cylinder Sizes17” - 27”

22” - 36”

28” - 46”

34” - 55”46” - 82”

52” - 88”

VerticaL aLuMinuM shoring By Quik-shor®

TPR First In Service11

Above ground installation provides safety.

Cylinder Extension Kits.

Over- sleeve protection for Cylinders.

Finger Guards eliminate hand and finger injury.

Rock Guards improve productivity and reduce shore damage.

Light weight construction offers increased production due to ease of handling.

Easily transported.

Portable hand pump and power pump use biodegradable shoring fluid.

Installation and removal tools.

Hydraulic manifolds are available on 12’, 16’, 20’ and 24’ rail lengths.

All Quik-Shores are available mounted with plywood.

Plywood has handles for ease of use and reinforced corners for strength and durability.

Verti

cal A

lum

inum

Hydr

aulic

Shor

ing


Pre-Assembled, Pre-Engineered vertical shoring systems are quick and easy. Because they are light-weight most shores can be handled by a single person, thus increasing productivity. The fact is in most situations, you can shore a trench as fast as your excavator can open the trench. Quik-Shor aluminum hydraulic shoring can be easily installed from above ground, keeping workers out of unprotected trenches.

12 high cLearance shoring ● waLers By Quik-shor®


www.tprco.com


High Clearance Shores are a must for your projects where pipe clearance is a factor.

Operating Widths

25” - 38”30” - 48”36” - 57”42” - 72”48” - 84”70” - 112”

Rail Lengths 8’, 10’, 12’, 16’

High Clearance Shoring • Walers

Rail Lengths 6’, 8’, 10’, 12’, 16’

Operating Widths

25” - 38”30” - 48”36” - 57”42” - 72”48” - 84”70” - 112”

Horizontal Walers are another creative way to shore an excavation. These systems are adaptable for crossing utilities.

An excellent light weight system.

Provide more working space.

All Walers can be installed from above ground.

Great for close sheeting job conditions.

Portable hand pump usesbiodegradable shoring fluid.

Cylinder Extension Kits.

Struts meet over sleeve requirements in all soil conditions.

Ideal for BIG PIPE projects 4’11” Cleatance for the bottom of rail.Up to 6’11” of clearance in A or B soils

www.tprco.com

► Walers

► Quik–Pump®

An Auto Shifting Multi Stage Pump

Dramatically reduces (up to 60%) the number of strokes required to bring a shore to pressure.

► Finger GuardsFinger guards protect your employees from getting pinched fingers. These guards have proven themselves in millions of uses insuring the safest work environment for your employees.

► Power Pump 2 Button Remote Hand ControlFold Down HandlesFlat Proof Rubber TiresMaintenance Free Sealed AGM Battery & ChargerEasy Clean FilterLow Power Consuming Motor on High Pressure PumpHigh Impact Plastic Storage BoxBalanced 2 Wheel Powder Coated Frame Quick Reference Guide

► Rock GuardsA Quik-Shor exclusive. Developed to prevent back-fill (Rocks) becoming lodged behind the cylinder block. Also acts to provide protection against pinched fingers.


Quik

-Pum

p®• P

ower

-Pum

p®• R

ock &

Fing

er

Quik-PuMP® ● Power-PuMP ® ● rock & Finger guarDs13


trench enD Brace By Quik-shor® TPR First In Service

www.tprco.com


Quik-Shor® has developed a close sheeting shore for the end of trenches.

End Braces can be used in conjunction with any other shoring system fromhydraulic shores to boxes.

Trench End Braces can be kept up to 2’ from the bottom of excavations in A & B soils.

Can be used to depths of 30’ and widths of up to 10’ depending on soil conditions.

Rail Lengths 4’, 6’, 8’, 10’

Cylinder Sizes29” - 43”

35” - 53”

41” - 62”

47” - 77”

53” - 89”75” - 117”

Trench End Brace14

DouBLe cyLinDer Power shore By Quik-shor®


Double Cylinder Power Shore utilizes Two-2” diameter hydraulic cylinders.

Offering superior strength and versatility, Double Cylinder Power Shores can be used in a wide range of shoring projects.

The double cylinder power shore allows large horizontal and vertical spacing of shores against steel plates. Horizontal and vertical spacing can be as much as 10 feet, depending on conditions.

There is also a high clearance with these shores. The shores can be spaced up to 5 feet from the bottom of the trench.

Double cylinder power shores were developed to work in conjunction with 1” steel plate.

► Screw Jack

Ball and socket joint at each brace allowing rapid adjustment.

Shoe-face lugs grip planking firmly.

Adaptable to any width trench by using varying lengths of standard pipe.

Doub

le Cy

linde

r Pow

er Sh

ore

15


® TPR First In Service

www.tprco.com


3 inch Steel Cylinder Power Strut is a versatile and powerful shore. It can be used in conjunction with steel plate, sheeting, beams or timbers to create; 2-way Waler Systems Huge Vertical Shoring Systems Cross Braces for Beam and Plate Systems The applications are endless Utilizing a double acting steel cylinder for ease of use and strength. The strength and power of the 3 inch Steel Cylinder make it adaptable to many challenging projects in unstable soils.

Power strut ● QuaDra Brace By Quik-shor®

with timber

Power Strut • Quadra Brace16

www.tprco.com

Quadra Brace is a 4-way Waler system which can create an open excavation as small as 7’6” square / rectangular and up to 24’ square / rectangular. The system uses 3” steel cylinders and steel extensions to create a variety of sizes and configurations. An extremely strong and versatile system for less stable soil conditions great for vaults, pump stations, tanks or any excavation needing a fully open area without cross bracing.

Quadra Brace is an active shoring system. By applying pressure against 4 sides of an excavation it allows an open excavation without cross bracing.

www.tprco.com

► Quadra Brace

Advantages of H- Pile and Wide Flange Beams

PILE AND PLATE

ADVANTAGES

► Vibrations associated with driving sheet pile are eliminated.

► Liquidation cost due to damaged piling is eliminated.

► After pile holes are drilled the H-Piles and Plates can be installed with an excavator. Does not require a pile driving crew.

► Pile and Plates can be removed by excavator.

► Piles can straddle cross lines, and Plates can be used as sheeting above and below cross lines.

► Pile size and cofferdam weight is the same for sheet pile systems or Beam and Plate systems.

► Requires the placement of pieces.

DISADVANTAGES

► Plates do not protect against flow of water and bottom heave in soft mud.

► Cannot do single wale or cantilever wall in soft mud.

► Pile hole will not stay open in sand and soft mud. Can be driven with Vibrohammer.

SHEET PILE

ADVANTAGES

► Piles are driven below base of excavation and will serve as a cut off wall. Eliminates water flow into base of excavation and bottom heave in soft clay and Bay Mud.

► Can be used in C-80 soil.

► Piles in place prior to excavation.

DISADVANTAGES

► Creates excessive vibrations during pile driving.

► Sheet pile can easily become damaged. Approximately 20% of sheet weight must be liquidated after the sheets are removed. Liquidation charges are the contractor’s responsibility.

► Requires pile driving crew, crane and pile driver to install.

► Requires pile crew and equipment to remove.

► Pile cannot be driven over the top of crossing utilities.

► Pile size and cofferdam weight is the same for sheet pile or Beam and Plate system.

► Requires placement of a larger number of pieces than Pile and Plate.

h-PiLe ● wiDe FLange BeaMTPR First In Service

H-Pi

le an

d Wid

e Fla

nge B

eam

s


17

Vibrations associated with driving sheet pile are eliminated.

Liquidation cost due to damagedpiling is eliminated.

After pile holes are drilled the H-Piles and Plates can be installed with an excavator. Does not require a pile driving crew.

Pile and Plates can be removed by an excavator.

Requires the placement of fewer pieces

Beam Sizes

10”, 12”, 14”

h-PiLe ● wiDe FLange BeaM TPR First In Service

www.tprco.com


H-Pile Wide Flange Beam

• Overlap Sheeting18

Strong, durable high strength steel sheets.

Ideal for use as shoring and bulk heading ends of trench shields, or anywhere that locking sheet are not required.

Overlap design allows for easy installation with less damage.

Overlap Sheeting will require a site-specific engineered plan, prepared by a Registered Professional Engineer.

► Overlap Sheeting

► H Pile & Wide Flange Beam

Slide Rail Systems have proven to be a highly adaptable shoring system. Having the ability to provide open pits and trench depths of up to 30 feet, and huge spans without the use of Walers.

Save 30% TO 60% off conventional sheeting.

Great for pipelines.

Second to none in pit applications.

Can be installed by a small crew and an excavator (No Drill Rig required).

Flexibility of components – almost any size and configuration is possible.

Utility crossings are easy to accommodate.

Larger cantilever means large structures or pipe can be accommodated.

Multiple operations can be performed simultaneously, creating greater productivity.

Pipeline Application Pit Application

sLiDe raiL systeM www.tprco.com


19Sl

ide R

ail S

yste

mTPR First In Service

◄ SKID RESISTANT PLATE ►

Steel Plate Sizes Size Thickness Weight Lbs.

4’ x 5’ ¾” 6134’ x 6’ 1” 9804’ x 8’ 1” 1,3074’ x 10’ 1” 1,6345’ x 10’ 1” 2,0425’ x 15’ 1” 3,0636’ x 8’ 1” 1,9606’ x 10’ 1” 2,4506’ x 12’ 1” 2,9406’ x 20’ 1” 4,9008’ x 10’ 1” 3,2678’ x 12’ 1” 3,9218’ x 15’ 1” 4,9018’ x 16’ 1” 5,2278’ x 20’ 1” 6,5346’ x 12’ 1½” 4,4118’ x 12’ 1½” 5,8808’ x 15’ 1½” 7,3518’ x 20’ 1½” 9,802

steeL PLate ● rock PLate

Temp. Manhole Rounds

Size Lbs.33” 20436” 25042” 28648” 654

Curb PlateSize Thick Lbs.

3’ x 10’ 1” 1,250

PLATES AVAILABLE WITH EYEBOLTS FOR EASE OF MOVEMENTTRENCH PLATE® RENTAL CO Toll free: 800-821-4478

Rock PlateSize Thick Lbs.

8’ x 10’ 1” 3,750 Rock Plates are a low cost, portable system designed to be placed at the exits of construction sites.

► Rock Plate

Steel Plate • Rock Plate • Curb Plate20


www.tprco.com

Fall Protection is a complicated issue and one of the most important faced by an employer or site supervisor. With over 100,000 reported incidents per year, falls from heights almost always result in serious injury.

9 ft. aluminum tripod is lightweight and portable, easily set-up by one worker

Adjusts from 7 ft. to 9 ft. height and will span a 6-1/2 ft. diameter hole

Complete with safety chain to prevent movement and safety shoes with rubber soles for flat surfaces and spiked edges for slippery surfaces.

Rated working load is 350 lbs. for work support and 310 lbs. for fall arrest, can withstand up to 5,000 lbs. of vertical pull.

Easy Operation; simply rotate the handle to raise or lower Gear ratio is 6:1 with an average lifting speed of 12.75 ft/min.

Free-Wheel Mode; an operator activated free wheel mode allows the drum to rotate and cable to pay-out freely

Built-In Fall Protection; The free-wheel mode has a built-in overspeed brake which provides secondary fall protection and added security

Level Wind; the drum level wind mechanism aids in spooling the cable onto the drum evenly and prevents slack line

Stainless steel and cast aluminum housing for corrosion resistance

50 ft. 3/16” galvanized steel wire rope for durability.

Built in retrieval winch for raising/lowering load during emergencies with built-in shock absorbing capabilities

Winch drive incorporates and overload device thus reducing the possibility of injury should the worker become entangled during retrieval

► 7-9’ Tri-Pod

► Sala Lift II Work Winch

► Sealed SRL with Retrieval Winch

triPoD ● winch ● harnessTPR First In Service

We rent what you need to protect your workers. In addition, we sell a full line of Fall Protection Equipment from industry leading Manufacturers

► Harness Every DBI/SALA harness combines maximum comfort, freedom of movement and ease of use without sacrificing safety. All harnesses are designed to securely retain you in case of a fall and distribute the impact forces throughout your body. Whether you wear a harness 4 hours a day or 14 hours a day, it needs to feel good and fit right for optimum comfort, safety and productivity. DBI/SALA harnesses are designed to fit you - no matter what your size or shape!

Trip

od • W

inch

• Har

ness


21

OSHA’s confined space regulations defines the following terms.

OSHA defines a confined space as any space in which the following three conditions exist concurrently:

1. The space is large enough and so configured that an employee can bodily enter and perform assigned work; and,2. The space has limited or restricted means for entry or exit; and,3. The space is not designed for continuous employee occupancy.

Examples of spaces which qualify as confined spaces under the OSHA definition include, but are not limited to: pipelines, storage tanks, vaults, vats, process vessels, catch basins, digesters, sewers, passageways, bins, boilers, pits, tank trucks, hoppers, tunnels, cargo holds, and excavations deeper than four feet.

A permit-required confined space is any confined space that has one or more of the following characteristics:

1. The space contains, or has the potential to contain, a hazardous atmosphere;2. The space contains a material which has the potential for engulfing an entrant3. The space has an internal configuration such that an entrant could be trapped or asphyxiated by inwardly converging walls or by a floor which slopes downward and tapers to a smaller cross- section; or, 4. The space contains any other recognized serious health or safety hazard.

A confined space that does not contain, or with respect to atmospheric hazards, have the potential to contain any hazard capable of causing death or serious physical harm.

An atmosphere is hazardous when it contains: 1. < 19.5% oxygen (O2 deficient) or > 23.5% oxygen (O2 enriched);2. A flammable gas, vapor, or mist at a concentration greater than 10% of its LEL (Lower Explosive Limit);3. A toxic material at a concentration greater than its PEL (Permissible Exposure Limit);4. A combustible dust at a concentration greater than its LEL, which may be approximated as a condition in which the dust obscures vision at a distance of 5 feet or less; or5. Any other atmospheric condition which is IDLH (Immediately Dangerous to Life or Health)

IDLH means any condition that poses an immediate or delayed threat to life or that would causeirreversible adverse health effects or that would interfere with an individual’s ability to escape unaided from a permit space.

conFineD sPace DeFinitions TPR First In Service

www.tprco.com

► Confined Space

► Permit-Required Confined Space

► Non-Permit Confined Space

► Hazardous Atmosphere

► Immediately Dangerous to Life or Health (IDLH)

Resource Information OnlyRefer to Specific Rules in your State


Confined Space Definitions22

► Testing the Confined Space Atmosphere Hazardous atmospheres are the leading cause of death in confined space work. In addition, it’s estimated that inhalation causes 90% of all chemical injuries in general industry. Hazardous atmospheres often do not exhibit any warning properties and so may not present themselves in any way that an entrant can recognize though their physical senses. A hazardous atmosphere may be colorless, odorless and tasteless and, with some contaminants, the health effects of overexposure may not be felt right away. For these reasons it is essential that the confined space atmospheric conditions be thoroughly assessed before the operation commences and continuously throughout the entry.The entry supervisor is responsible for ensuring that a confined space atmosphere is tested before anyone enters the space and that the results of the testing are appropriately recorded on the entry permit. Entrants must be allowed to observe the pre-entry testing if they choose. The internal atmosphere must be tested with a calibrated, direct-reading instrument for the following conditions in the order given:

Oxygen content; Flammable gasses and vapors; and, Potential toxic air contaminants.

Oil and Gas (Drilling and Production Leak DetectionHot Work PermitsLPG Storage AreasOffshore and Onshore for Drilling - Production – Service Rigs Facility Turnarounds/ShutdownsConfined Space EntryVessel EntryPersonal Protection Equipment (PPE)Fire Brigade Municipalities(Dirty Water Treatment/Transmission &Clean Water Transmission)Confined Space EntryWater/Sewer Manhole EntrySewage Treatment FacilitiesLandfill Manhole Entry Utilities(Power Generation & Gas Distribution) Confined Space Entry Gas Leak DetectionOil, Gas and Coal Fired Power GenerationLandfill Gas GenerationHot Work PermitsTurnarounds/Shut downs Telecom Underground Work in Cable Splicing and Installation Controlled Environment Vault (CEV) WorkMan Hole EntryCable repair

Steel MillsConfined Space Entry General Worker Protection Pulp and PaperPersonal ProtectionVessel Entry and InspectionLeak DetectionWork Site SafetyConfined Space Entry ConstructionTrenching and ShoringUnderground WorkVentilation System Marine/ShippingVessel EntryShip Hold InspectionsHot Work Permits & Repair AirlinesTank Entry & CleaningWing Tank InspectionsFuel Storage TransportationTractor Trailer Tank CleaningRailcar Inspection and RepairTerminal Storage VesselsParking Garages

Tank Cleaning and Vessel Inspections-Confined Space EntryHot Work PermitsPersonal Protection Equipment (PPE)Planned Maintenance-Plant Turnarounds/Plant ShutdownsFire BrigadeLeak Detection Fire RescueHome CO Alarm ConfirmationHazmat ResponseConfined Space Entry Search and Rescue OperationsPost Fire Inspection Safety

Agriculture Grain Silo EntryFood Storage Elevators Regional Grower’s CommissionHog Barns Industry in GeneralMilitaryPharmaceuticalsMiningChemicals

Anywhere confined space entry is necessary

Refineries and Petrochemical Facilities

► Applications for Gas Detectors

hazarDous atMosPhereTPR First In Service


Haza

rdou

s Atm

osph

ere

23


Rental Gas Detector Kits Include sampling pump, sampling probe, rechargeable and replaceable battery packs. All units are manufactured by one of the world leaders in Gas Detection.

Portable Gas Detector Simultaneously monitors and displays 4 potential atmospheric hazards including oxygen, combustible gases and a range of toxic gases.

Compact and lightweight Gas Alert Micro 5 features audible, visual and vibrator alarms active in the event of a low, high TWA or STEL alarm condition.

► Smaller and over 50% lighter than competitive instruments.

► Water-resistant design in an integral concussion-proof enclosure.

► Continuous LCD shows simultaneous gas concentrations for four gases.

► Integral motorized pump option for remote sampling

► Two power options: AA alkaline or rechargeable hot-swappable battery packs.

► Provides 95dB alarm tone and two bright wide-angled alarm bars.

► Equipped with internal vibrating alarm for high noise areas .

► Four alarm levels: instantaneous Low & High Alarm for all gases; TWA (time- weighted average) and STEL (Short- term exposure limit) for toxic gases.

► Full function self-test of: sensor, battery and circuit integrity; and audible/visual alarms.

PortaBLe gas Detector TPR First In Service

TPR has many types of Gas Detector Kits for sale. Personal Single Gas and Multi Gas

Call us for a complete list of product and services.

www.tprco.com


Portable Gas Detector24

300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500500 13 10 8 7 6 5 5 5 5 5 5 5 5600 15 12 9 8 7 6 5 5 5 5 5 5 5700 18 14 11 9 8 7 6 6 5 5 5 5 5800 20 15 12 10 9 8 7 6 6 5 5 5 5900 23 17 14 12 10 9 8 7 7 6 6 5 5

1000 25 19 15 13 11 10 9 8 7 7 6 6 52000 50 38 30 25 22 19 17 15 14 13 12 11 103000 75 57 45 38 33 29 25 23 21 19 18 17 154000 100 75 60 50 43 38 34 30 28 25 24 21 205000 125 94 75 63 54 47 42 38 35 32 29 27 256000 150 113 90 75 65 57 50 45 41 38 35 33 307000 175 132 105 88 75 66 59 53 48 44 41 38 358000 200 150 120 100 86 75 67 60 55 50 47 43 409000 225 169 135 113 97 85 75 68 62 57 52 49 45

10000 250 188 150 125 108 94 84 75 69 63 58 54 50

EffEctivE BlowEr capacity - cfMConfined SpaCe Ventilation purge time Chart - air exChange 7.5 timeS

Co

nfi

ned

Spa

Ce

Volu

me

in C

ub

iC f

eet

1– Number in Table represents minutes of purge time required to completely exchange air 7.5 times. If duct is properly set-up to extend to the farthest corner away from the entrance this will be effective. If not, then the air in the farthest corner may not be exchanged unless there is a good churning action present.

2– If two blowers are used, add the two capacities, then proceed.3– When toxic gases are encountered, increase purging time 50%.

Forced Air Ventilation is the primary engineering control used to maintain safe atmospheric conditions in confined spaces. The confined space should be ventilated using the following guidelines:

1. Locate the blower a safe distance from the confined space;2. Ensure that the air supply is not contaminated;3. If ventilation equipment blocks or restricts access to the confined space,

precautions must be taken to provide entrants with respirable air for the time necessary to exit the space (Note: Using a saddle vent is a good way to avoid this problem altogether.) ;

4. If a flammable atmosphere exists or may develop, the ventilating equipment must be properly bonded and grounded to prevent a static discharge;

5. Continuous ventilation should be maintained for the duration of the entry; and,6. When ventilating to eliminate a hazardous atmosphere, the blower should be

run for a sufficient length of time. The atmosphere should then be re-tested to determine if conditions are safe for entry.

VentiLation eQuiPMentTPR First In Service


Vent

ilatio

n Equ

ipm

ent

25


► Electric Ventilator490 CFM 12 Volt DC, 15 Amps40 lbs. 25’ Hose

Electric Ventilators are low maintenance, compact, and lightweight. Specifically designed to provide a completely portable source of fresh air in various underground, confined, and outdoor areas .

553 CFM 120 Volt AC, 3 Amps40 lbs. 25’ Hose

Custom designed Ventilation Equipment We have what it takes to provide fresh air for your employees, year after year.

18” Inlet – Outlet

All Required OSHA Guards and Screens Flashing Strobe Light when Operating

Fuel Requirements, 5 Gal. For 8 hrs.

12,000 CFM Ventilator

Quiet and Economical Diesel Operated

Aluminum Impeller(reduced explosion risk)

► Diesel Ventilator

DieseL & eLectric VentiLator TPR First In Service

www.tprco.com


Diesel & Electric Ventilator26

source of fresh air in various underground, confined, 120 Volt AC, 3 Amps40 lbs. 25’ Hose

www.tprco.com

Increase your safety with Trench Plate® Rental Co

Our complete line of Traffic Control Equipment is available for rent or purchase.

► We provide Traffic Control Plans.

► Complete set up and tear down of equipment on site. ► Custom Signs

Barricades, Type I and IIIConesDrums Light TowersMessage BoardsSolar Arrow Panels Solar Message Boards Flashing Beacon LightsConstruction SignsWarning SignsSign Stands3 Way LightsSand BagsCaution TapeBatteries

Please call for a complete list of products and services.

traFFic controL eQuiPMentTPR First In Service

Traf

fic Co

ntro

l Equ

ipm

ent

27


► Flashing Beacon LightSolar Recharged Flashing Yellow Beacon Light, can operate indefinitely when properly installed in most places.

► Halogen lamp for brighter light. ► Over-Charge protection during bright days.► Low-Charge protection for maximum battery life.► Horizontal & vertical adjustments.► Lockable battery box, 12” Lens. Height: 101” travel position

► Large Message BoardThe Large Solar Message Board is designed to provide advance warning information to oncoming drivers. This unit is highly reliable and easy to operate. Its rugged frame construction will provide you with years of service; and its state of art embedded microprocessor electronics makes it simple to operate and maintain.

► Medium Message BoardThe Medium Solar Message board is designed to provide advance warning information in text and graphical formats. This unit is desirable in temporary situation and long term changeable message sign applications where space restrictions do not allow large panel message boards.

Beacon Light ● Message BoarD TPR First In Service

► Solar Arrow PanelThe Solar Arrow Panel traffic controller is trailer mounted and has a self-contained solar power electronic charging system. It is designed to provide advance warning and directional information to assist in diverting and controlling traffic around construction or maintenance activities on or adjacent to the traveled roadway.

138” extended

www.tprco.com


Beacon Light • Message Board28

Heavy-duty, trailer-mounted light towers feature a compact and narrow body design for easy transport - two abreast on a flatbed truck. Distinctive elliptical light fixtures allow light to travel directly to the work area for brighter illumination. Each light can be individually adjusted without tools. The 360-degree rotating mast allows for light adjustment while raised.

Large capacity fuel tank allows for 68 hours of continuous lighting/run time.

Four 2,000 lb. rated zinc-plated leveling jacks provide easy leveling and stability on uneven terrain and in windy conditions.Control panel features an elapsed hour meter and a convenient 120V GFCIreceptacle with circuit breakers foradditional power.

Light towerTPR First In Service

Light

Towe

r29


k-raiL ● water FiLLeD Barrier TPR First In Service

www.tprco.com


K-Rail • Water Filled Barrier

30► K-Rail

► Water Filled Barrier

10’ and 20’ lengths of Concrete Barricade.

Used as temporary barrier in work zones.

Any quantity delivered to your job site.

Meets all state regulations.

Water Filled Barrier is an alternative to concrete K-Rail.

Six Foot lengths, weight 170 lbs empty, and approximately 1,700 lbs full.

The customer is responsible for filling and draining.

Cost effective

Fast deployment

Highly visible

Work zone protection

Traffic channeling & control

Lane delineation

Crowd control

Soil erosion control

trench BriDge ● waLkwayTPR First In Service

Tren

ch B

ridge

• Wal

kway

31


► Heavy Duty Trench

► Standard Duty Walkway

► Portable Bridge

Trench bridges are designed to meet State requirements associated with workers safely crossing trenches.

Walkways are designed to meet State requirements associated with workers safely crossing trenches.

This Three Section Bridge easily bolts together to create a 38 foot long and 17½ foot outside dimension bridge.

Bridge includes 3 foot 6 inch railings, and is designed for 102,000 lbs. gross carrying weight. Deck is diamond plate.

Heavy Duty Trench Bridge

Width Length Wt. Lbs.30” 8’ 26030” 12’ 38530” 16’ 50030” 20’ 600

Standard Duty Walkway

Width Length Wt. Lbs.28” 8’ 13328” 12’ 26028” 16’ 205

By Quik-shor®

► Multi-Size Deflection GaugeDeflection gauges are used to test pipes for obstructions; and detect any malformation of the pipe. This testing ensures that flexible pipe has been properly bedded and back-filled to give maximum performance.

► Mechanical Pipe Plug

Many sizes available for rent or sale

► Lightweight Aluminum

► Neoprene Sealing Ring

► 100% surface Contact

► All Parts Replaceable 4” thru 21”

► (D&T) Ready For Pressure Testing

Mechanical Sewer Plugs save you time and water by eliminating back filling of lines when cleaning pipe. Used in underground construction, the plug keeps all foreign objects out of the line during excavation.

DeFLection gauge ● MechanicaL PiPe PLug TPR First In Service

www.tprco.com


Deflection Gauge • Mechanical Pipe Plug32

Durable rugged construction Plug-It Products meet or exceed industry standards.

BLOCKING PLUG

LEAK LOCATOR WITH TEST-THRU PORTS

FLOW DIVERTER

► Test Plugs ► Blocking Plugs ► Flow Diverters ► Mechanical Plugs ► Manhole Testing Equipment

► Flow Block “Weenie” Plugs

► Wash Balls

WASH BALL VACUUM TEST PLUG

AIR TEST REEL

PiPe PLug ● Leak LocatorsTPR First In Service

Many sizes and other products are available for rent and sale.

We stock Plugs from

We custom design and build to fit your requirements.

3” to 48”

DUAL STAGE LONG

TEST PLUG

“WEENIE” PLUG

Pipe

Plug

• Lea

k Loc

ator

s33


Inside application;

15 ton capacity42” -108”

30 ton capacity72” -144”

Remote control

Specifications

Remains stationary in the first pipe until the cables are extended and hooked to the end of the second pipe. A heavy-duty hydraulic cylinder draws the sections together minimizing grouting and pipe breakage.

PiPe roLLer ● PiPe PuLLer TPR First In Service

www.tprco.com


Heavy Duty Pipe RollerHard Rubber Roller Bearing Rollers4000 pound capacity per unitFrom 48” to 1 ½” Pipe Capacity

► Less Pipe Breakage ► Safer, Tighter Joints ► Reduces Job Costs

► Pipe Puller

► Pipe Roller

This Pipe Roller features adjustable hard rubber coated Roller Bearing Rollers. The hard rubber is a big plus for field welding because the rubber absorbs small sand and grit for smoother rolling. Each roller unit is rated at 4000 pounds, (8000 for a two unit set-up). This Heavy Duty Pipe Roller can handle pipe up to 48” and as smalls as 1-1/2”.

By Quik-shor®

Pipe Roller • Pipe Puller34

► Rock Screen By Quik-shor®

Other sizes available upon request

Rock Screens are designed for sifting rock and debris from soil on your jobsite.

Rock Boxes (Bedding Container) is designed with aggregate conservation in mind. Bedding material is confined thus eliminating loss of material, reducing traffic congestions and safety problems associated with front end loader dumping from the edge of the trench.

Capacity Size Wt. Lbs.7 CU Yards 48” x 60” x 160” 5,6009 CU Yards 48” x 64” x 181” 6,30012 CU Yards 48” x 75” x 200” 7,400

Screens Size2” Minus4” Minus6” Minus

► Rock Box By Quik-shor®

rock screen ● rock Box By Quik-shor®


Rock

Scre

en • R

ock B

ox35


“Competent person” means one who is capable of identifying existing and predictable hazards in the surroundings or working conditions which are unsanitary, hazardous, or dangerous to employees, and who has authorization to take prompt corrective measures to eliminate them.

This program has been designed to provide your labor force with the classroom training which along with their field experience may enable them to become a “Competent Person” as defined by OSHA.

ANNUALLY, 100 TO 400 PEOPLE ARE KILLED BY CAVE-INS., 1,000

TO 4,000 ARE INJURED.

coMPetent Person ● FLagger training TPR First In Service

www.tprco.com


Competent Person • Flagger Training

36

► TOPICS DISCUSSED OSHA General Requirements Requirements for protective systems Soil classification Selection of protective systems How to read tabulated data sheets Checklists / Resources

www.tprco.com

► Flagger Training

► Competent Person Training

A FOUR HOUR CLASS TAUGHT BY ATSSA CERTIFIED INSTRUCTORS

TOPICS INCLUDE:

► Use of the MUTCD and other standard references.

► Determine if signs and devices on a project meet the standards of MUTCD.

► INCLUDED Comprehensive manual Certificate of course completion

Meanings of Symbols on Typical Application Diagrams

Types of Tapers and Buffer Spaces

teMPorary traFFic controLTPR First In Service

Tem

pora

ry Tr

affic

Cont

rol

37


Sloping & Benching Hydraulic ShoringNote: Always install shoring from the top down

& remove from the bottom up.

sLoPing & Benching ● shoring TPR First In Service

www.tprco.com


Trench Plate®

Rental Co38

FIRST IN SERVICE

Trench Plate® Rental Co is in its third decade of providing quality equipment, service and solutions to the construction industry.

No matter what your application, Trench Plate® Rental Co has the equipment and experience to satisfy your project requirements. We provide a full line of:

► Excavation Shoring Equipment. ► Temporary Traffic Control Equipment. Traffic plans, set up and removal of traffic control equipment on your job site.

► Confined Space Entry Equipment, from portable gas detectors and ventilators to harnesses, tripods and winches. ► Training: we provide comprehensive demonstrations on the proper use of equipment and general OSHA Standards.

Trench Plate® Rental. CoCorporate Office

13217 Laureldale Ave.Downey, CA 90242

888-833-3777

North S.F. Bay Area 800- 321-5550

Los Angeles 800- 821-4478 South S.F. Bay Area 877- 246-4086North Los Angeles 877- 246-4087 Sacramento 800- 548-0688Ventura / Santa Barbara 855- 834-9058 Fresno - Central Valley 844-803-8408Orange County 800- 772-8004 Reno, NV 877- 809-6492Inland Empire 877- 246-4085 Las Vegas, NV 877- 809-6493San Diego 800- 350-7528 Houston, TX 866- 247-9449

www.tprco.com [email protected]

Call toll free:

Traffic Control Speciality Locations Los Angeles / Orange County 866- 537-1260 Inland Empire 855- 326-5953 San Leandro 855- 351-1114www.tprts.com [email protected]

tpr catalog (pdf)

Documents