top assembly instructions...slide t5 into the grooves in t3 and t4. push t5 all the way forward so...
TRANSCRIPT
88 9100 106 C
Wood Top
9100 Series
Top Assembly Instructions
PART LIST HARDWARE LIST
W1.Top
1 pc.
Head Cap Bolt6 pcs. (+1 extra)
X.Top Support2 pcs.
Home Styles Consumer Assistance Line 888-680-7460 and [email protected]
STEP 3
STEP 1
STEP 2
S
T
U
U
U
V
A
B
Place Top (W1) onto the unit,then tighten up allHead Cap Bolts.
Attach Pull Handles toDoor (S) and (T), using MachineScrews. (See figure 1)
Attach Door (S) and (T) toSide Panel (A) and (B), slide thedoor lift hinges into the side panellift hinges. (See figure 2)
Slide Drawers (U) and (V)into place.
9100 Series Top Assembly Instructions
Figure 1 Figure 2
Put Top Support (X) into thepre-drilled holes, using HeadCap Bolts to attach it to the unit.
W1
XX
Head Cap Bolt
Head Cap Bolt
Home Styles Consumer Assistance: www.homestyles-furniture.com,[email protected], 888-680-7460, 877-831-0319
Tools required for assembly : Phillips screwdriver
Part List
IMPORTANT NOTE
Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occurring to the wood parts.
We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed.
Hardware List
Wood Plug10 pcs. (+2 extra)
Hex Wrench1 pc.
CasterTwo with lock andTwo non-locking4 pcs.
M3.5x25Wood Screw (long)32 pcs. (+1 extra)
Knob2 pcs.
88 9100 001CNKitchen Cart
He1 p
M4x25Machine Screw10 pcs.
(Please refer to the last pages of theseinstructions for drawer assembly.)
J.Base1 pc.
M6x35Head Cap Bolt (long)14 pcs. (+1 extra)
Adjustable Pin8 pcs. (+1 extra)
SmallHex Wrench1 pc.
t
M4x16Wood Screwfor Caster 16 pcs. (+1 extra)
D.Middle Panel1 pc.B.
Side Panel1 pc.
E.Back Panel3 pcs.A.
Side Panel1 pc.
F.Back Piece2 pcs.
G.Back Stretcher1 pc.
H.Front Stretcher1 pc.
R.Base Rack1 pc.
O.Door1 pc.
T.Drawer3 pcs.
U.Drawer1 pc.
K.Shelf2 pcs. L.
Handle Arm2 pcs.
M.Round Arm1 pc.
M3.5x13Wood Screw (short) 24 pcs. (+1 extra)
asepc.
. ..
.rawer
.helf
.
R
.
C.Middle Panel1 pc.
N.Door1 pc.
Q.Side Rack1 pc.
P.Side Rack1 pc.
I.Front Rail3 pcs.
S.Pipe3 pcs.
Pull Handle4 pcs.
STEP 2Attach Back Pieces (F) to Middle Panels (C) and (D).
Attach Front Rails (I) to Middle Panels (C) and (D).
IMPORTANT* Do not tighten up all the screws and bolts until each part is properly assembled.* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.* Use a soft cloth between these parts and the fl oor.
Assembly Instruction 2 / 6
I
I F
I
Locking Casters
Wood Screw for Casters
C
D
JNon-Locking Casters
Figure 1
F
STEP 1Attach 4X Casters to Base (J) with Wood Screws for Caster, with the Locking Casters at the front as indicated by ‘Arrow’ sticker. (see Figure 1)
STEP 3Attach unit to Base (J).
Attach Side Panel (A) to unit with Head Cap Bolts. (see Figure 2)
STEAttach
Attach(see F
Assembly Instruction 3 / 6
STEP 4Slide Back Panels (E) into the unit.
Attach Back Stretcher (G) and Front Piece (H) to the unit with Head Cap Bolts.
Attach Side Panel (B) with Head Cap Bolts.
B
Head Cap Bolt
J
A
EE
S
Q
E
G
H
Head Cap Bolt
Head Cap Bolt
Figure 2
STEP 5 Attach Side Rack (Q) to the unit with Head Cap Bolts.
Slide Base Rack (R) and Pipes (S) to Side Rack (Q).
Attach Side Rack (P) to unit with Head Cap Bolts.
S
R S P
STEP 8Cover all holes with Wood Plugs. (see Figure 3)
L
Assembly Instruction 4 / 6
STEP 6Assemble Handle Arms (L) to Side Panel (B) with Head Cap Bolts.
Slide Round Arm (M) into place.
STEP 7Insert Adjustable Pins into side panels and middle panels at the desired level and slide Shelves (K ) into place.
M
KK
B
Figure 3
L
Head Cap Bolt
Wood Plug
Adjustable PinWood Plug
T2
STEP 2Slide T5 into the grooves in T3and T4. Push T5 all the way forward so it meets T1. (see Figure 2)
Assembly Instruction 5 / 6
Drawer (T)
Part List
T2.Back Part3 pcs.
T3.Side Part3 pcs.
T4.Side Part3 pcs.
T5.Base Part3 pcs.
T1.Front Part3 pcs.
T5
T3
T4
T2
STEP 1Attach T1 to T3 and T4, usinga Phillips screwdriver andlong wood screws (4X), tightenhalfway.
Attach T2 to T3 and T4 usinglong wood screws (4X), tightenhalfway. (see Figure 1)
STEP 3Insert short wood screws (6X)into the pre-drilled holes in T5and tighten. (see Figure 3)
STEP 4Assemble Pull Handlewith Machine Screws. (see Figure 4)
Tighten all screws used in drawer assembly.
MAKE SURE ROLLERIS ON THE BACK
T3
T4
T1
T1
T5T3
T1
Figure 1
Figure 2
Figure 4
Figure 3
T2
T4
T1.Front Part
T3 T4
Figure 4
STEP 2Slide U5 into the grooves in U3and U4. Push U5 all the way forward so it meets U1. (see Figure 2)
Assembly Instruction 6 / 6
Drawer (U)
Part List
U2.Back Part1 pc.
U3.Side Part1 pc.
U4.Side Part1 pc.
U5.Base Part1 pc.
U1.Front Part1 pc.
U5
U3
U4
U2
STEP 1Attach U1 to U3 and U4, usinga Phillips screwdriver andlong wood screws (4X), tightenhalfway.
Attach U2 to U3 and U4 usinglong wood screws (4X), tightenhalfway. (see Figure 1)
STEP 3Insert short wood screws (6X)into the pre-drilled holes in U5and tighten. (see Figure 3)
STEP 4Assemble Pull Handlewith Machine Screws. (see Figure 4)
Tighten all screws used in drawer assembly.
MAKE SURE ROLLERIS ON THE BACK
U2
U3
U4
U1
U1
U5U3 U1
Figure 1
Figure 2
Figure 4
Figure 3
U2
U4
U1.Front Part
U2
Figure 4