88 9100 104c black granite top...slide t5 into the grooves in t3 and t4. push t5 all the way forward...

Home Styles Consumer Assistance: www.homestyles-furniture.com,[email protected], 888-680-7460, 877-831-0319

Part List

IMPORTANT NOTE

Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occurring to the wood parts.

We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed.

Hardware List

88 9100 104CBlack Granite Top

9100 SeriesTop Assembly Instructions

M6x30Head Cap Bolt6 pcs. (+1 extra)

V.Support Top2 pcs.

W.Top1 pc.

9100 Series

V.Support Top

STEP 3

Attach Pull Handles to Doors (N) and (O) using Machine Screws. (See Figure 1)

Attach Doors (N) and (O) by sliding door lift hinges into the side panel lift hinges.(See Figure 2)

Slide Drawers (T) and (U) into place.

9100 Series Top Assembly Instructions

TO

N

T

W

V

Figure 2

STEP 1

Put back end of Top Supports (V) into thepre-drilled holes in unit and attach with Head Cap Bolts.

STEP 2

Place Top (W) onto the unit and then tighten all Head Cap Bolts.

U

T

V

Figure 1Head Cap Bolt

Head Cap Bolt

IMPORTANT NOTE

Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts.


Part List


W.Top 1 Pc.

88 9100 104CBlack Granite Top

9200 SeriesTop Assembly Instructions

9200 Series Top Assembly Instructions

STEP 1

Remove the drawers from the unit.

Place Top (W) onto the unit and attach it to the body with the Steel Plate Connectors,Flat Washers, Spring Washers and Head Cap Bolts (short). (See Figure 1)

Slide the drawers into place.

Steel Plate Connector

Flat Washer

Spring Washer

Head Cap Bolt(short)

BW

Figure 1


Tools required for assembly : Phillips screwdriver

Part List

IMPORTANT NOTE

Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occurring to the wood parts.


Hardware List

Wood Plug10 pcs. (+2 extra)

Hex Wrench1 pc.

CasterTwo with lock andTwo non-locking4 pcs.

M3.5x25Wood Screw (long)32 pcs. (+1 extra)

Knob2 pcs.

88 9100 007CNKitchen Cart

He1 p

M4x25Machine Screw10 pcs.

(Please refer to the last pages of theseinstructions for drawer assembly.)

J.Base1 pc.

M6x35Head Cap Bolt (long)14 pcs. (+1 extra)

Adjustable Pin8 pcs. (+1 extra)

SmallHex Wrench1 pc.

t

M4x16Wood Screwfor Caster 16 pcs. (+1 extra)

D.Middle Panel1 pc.B.

Side Panel1 pc.

E.Back Panel3 pcs.A.

Side Panel1 pc.

F.Back Piece2 pcs.

G.Back Stretcher1 pc.

H.Front Stretcher1 pc.

R.Base Rack1 pc.

O.Door1 pc.

T.Drawer3 pcs.

U.Drawer1 pc.

K.Shelf2 pcs. L.

Handle Arm2 pcs.

M.Round Arm1 pc.

M3.5x13Wood Screw (short) 24 pcs. (+1 extra)

asepc.

. ..

.rawer

.helf

.

R

.

C.Middle Panel1 pc.

N.Door1 pc.

Q.Side Rack1 pc.

P.Side Rack1 pc.

I.Front Rail3 pcs.

S.Pipe3 pcs.

Pull Handle4 pcs.

STEP 2Attach Back Pieces (F) to Middle Panels (C) and (D).

Attach Front Rails (I) to Middle Panels (C) and (D).

IMPORTANT* Do not tighten up all the screws and bolts until each part is properly assembled.* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.* Use a soft cloth between these parts and the fl oor.

Assembly Instruction 2 / 6

I

I F

I

Locking Casters

Wood Screw for Casters

C

D

JNon-Locking Casters

Figure 1

F

STEP 1Attach 4X Casters to Base (J) with Wood Screws for Caster, with the Locking Casters at the front as indicated by ‘Arrow’ sticker. (see Figure 1)

STEP 3Attach unit to Base (J).

Attach Side Panel (A) to unit with Head Cap Bolts. (see Figure 2)

STEAttach

Attach(see F


STEP 4Slide Back Panels (E) into the unit.

Attach Back Stretcher (G) and Front Piece (H) to the unit with Head Cap Bolts.

Attach Side Panel (B) with Head Cap Bolts.

B

Head Cap Bolt

J

A

EE

S

Q

E

G

H

Head Cap Bolt

Head Cap Bolt

Figure 2

STEP 5 Attach Side Rack (Q) to the unit with Head Cap Bolts.

Slide Base Rack (R) and Pipes (S) to Side Rack (Q).

Attach Side Rack (P) to unit with Head Cap Bolts.

S

R S P

STEP 8Cover all holes with Wood Plugs. (see Figure 3)

L


STEP 6Assemble Handle Arms (L) to Side Panel (B) with Head Cap Bolts.

Slide Round Arm (M) into place.

STEP 7Insert Adjustable Pins into side panels and middle panels at the desired level and slide Shelves (K ) into place.

M

KK

B

Figure 3

L

Head Cap Bolt

Wood Plug

Adjustable PinWood Plug

T2

STEP 2Slide T5 into the grooves in T3and T4. Push T5 all the way forward so it meets T1. (see Figure 2)


Drawer (T)

Part List

T2.Back Part3 pcs.

T3.Side Part3 pcs.

T4.Side Part3 pcs.

T5.Base Part3 pcs.

T1.Front Part3 pcs.

T5

T3

T4

T2

STEP 1Attach T1 to T3 and T4, usinga Phillips screwdriver andlong wood screws (4X), tightenhalfway.

Attach T2 to T3 and T4 usinglong wood screws (4X), tightenhalfway. (see Figure 1)

STEP 3Insert short wood screws (6X)into the pre-drilled holes in T5and tighten. (see Figure 3)

STEP 4Assemble Pull Handlewith Machine Screws. (see Figure 4)

Tighten all screws used in drawer assembly.

MAKE SURE ROLLERIS ON THE BACK

T3

T4

T1

T1

T5T3

T1

Figure 1

Figure 2

Figure 4

Figure 3

T2

T4

T1.Front Part

T3 T4

Figure 4

STEP 2Slide U5 into the grooves in U3and U4. Push U5 all the way forward so it meets U1. (see Figure 2)


Drawer (U)

Part List

U2.Back Part1 pc.

U3.Side Part1 pc.

U4.Side Part1 pc.

U5.Base Part1 pc.

U1.Front Part1 pc.

U5

U3

U4

U2

STEP 1Attach U1 to U3 and U4, usinga Phillips screwdriver andlong wood screws (4X), tightenhalfway.

Attach U2 to U3 and U4 usinglong wood screws (4X), tightenhalfway. (see Figure 1)

STEP 3Insert short wood screws (6X)into the pre-drilled holes in U5and tighten. (see Figure 3)

STEP 4Assemble Pull Handlewith Machine Screws. (see Figure 4)

Tighten all screws used in drawer assembly.

MAKE SURE ROLLERIS ON THE BACK

U2

U3

U4

U1

U1

U5U3 U1

Figure 1

Figure 2

Figure 4

Figure 3

U2

U4

U1.Front Part

U2

Figure 4

88 9100 104c black granite top...slide t5 into the grooves in t3 and t4. push t5 all the way forward...

Documents