tools solder and materials

TS-1

NSW+61 2 9893 9400

Wellington+64 4 915 9500

Victoria+61 3 9775 4778

Auckland+64 9 443 9500

Christchurch+64 3 355 4545

www.activecomponents.com [email protected] Over one million electronic components online.

screwdrivers

Wiha SofTfiniSh® ElEcTricThE SafE and comforTablE inSulaTEd VdE ScrEWdriVEr• Applications on live equipment are subject to very

special requirements. The focus is on absolute user safety and Wiha demonstrates this with a wealth of details.

• The high quality blade insulation guarantees safety when working on live equipment up to 1500VDCor 1000VAC. To maintain this safety, each screwdriver of the SoftFinish® electric seriesis individually tested in a water bath at 10000 Volts according to IEC60900:2004.

• The roll-off protection and the special handle geometry offer optimum handling and electrical safety, even in critical applications.

The right tool at a glance,thanks to the printed screw symbol on the handle end.

The insulation is moulded directly onto the blade and cannot be detached from the handle.

Safety information• When working with VDE tools, observe the national safety and

accident prevention regulations.

missing link.

Wiha SofTfiniSh® inSulaTEd ScrEWdriVErS

• Softfinish®handle.Solidmouldedcorewithsoftoutercushiongrip. • 40%moretorquethanconventionalhandles• Blade.CVMtoolsteel,hardenedtoaverage58/60RC

insulation Standards:InsulationaccordingtoEN/IEC60900,ASTMF-1505-01,NewVDE0682/part 201, DIN 7437, NFPA70E

Eachtoolindividuallytestedto10,000voltsandcertifiedto1000Voltacor 1500 Volt dc

Wiha ScrEWdriVErS SETS320 nZK6 inSulaTEd 6 pc SET WiTh SquarE driVE

320nK7 7 pc SET in plaSTic caSE

Set includes: • 1xInsulated358N#2x150mmSquareDrive• 1xInsulated358N#1x100mmSquareDrive• 1xInsulated324#2x100Pozi• 1xInsulated324#1x80Pozi• 1xInsulated3203.5x100mmSlotted• 1xInsulated3205.5x125mmSlotted

Set includes: • 1xInsulated320N2.5x75mmSlotted • 1xInsulated320N4.0x100mmSlotted • 1xInsulated320N5.5x125mmSlotted • 1xInsulated320N6.5x150mmSlotted • 1xInsulated321N#1x80mmPhillips • 1xInsulated324N#2x100mmPhillips • 1x255-3150-250vtestS/Driver

product description order code

320NZK6 Insulated Square Drive 6pc P652705


320NK7 Plastic case 7pc P652707

Note:Softfinish®InsulatedScrewdriversarealsosoldseparately,pleasecontactus for further details.!

TS-2

NSW+61 2 9893 9400


Victoria+61 3 9775 4778

Auckland+64 9 443 9500



screwdrivers

272K6 prEciSion ESd SloTTEd/ phillipS ScrEWdriVEr 6 pc SET- Dissipative handle, ESD-safe

278K6 prEciSion ESd TorX® ScrEWdriVEr 6 pc SET- Dissipative handle, ESD-safe

Blade ....................................... High quality chrome-vanadium-molybdenum steel, through hardened, chrome-plated. Wiha ChromTop®finishontipforaperfectfit every time.Handle ..................................... Precision handle with rotating cap, surface resistance 10^6 - 10^9Ohm.Standards ................................. IEC 61340-5-1.Application .............................. For working on electrostatically sensitive components.Extra ........................................ Practical plastic rack with hanging holes. In plasticbox,canbeopenedandpositionedon workbench.

Blade ....................................... High quality chrome-vanadium-molybdenum steel, through hardened, chrome-plated. Wiha ChromTop®finishontipforaperfectfit every time.Handle ..................................... Precision handle with rotating cap, surface resistance 10^6 - 10^9Ohm.Standards ................................. IEC 61340-5-1.Application .............................. For working on electrostatically sensitive components.Extra ........................................ Practical plastic rack with hanging holes. In plasticbox,canbeopenedandpositionedon workbench.


272K6 Precision ESD Slotted 6pc P652709


278K6 PrecisionESDTorx® 6pc P652710

Set includes: • 1.5x40 • 2.0x40 • 2.5x50 • 3.0x50 • PH00x40 • PHOx50

Set includes: • T5x40 • T6x40 • T7x40 • T8x40 • T10x50 • T15x60

272 Series

273 Series

278 Series

302 ESd hK501 SloTTEd/phillipS SofTfiniSh® ESd SafE 5pc – FulfilsESDStandardIEC61340-5-1

E S D - P R O T E C T I O N

Set includes: • 1x302ESD3.0x100mmSlotted• 1x302ESD4.0x100mmSlotted• 1x311ESD#0x60mmPhillips• 1x311ESD#1x80mmPhillips• 1x311ESD#2x100mmPhillips


HK501 Softfinish® ESD Safe 5pc P652708

Note:Softfinish®InsulatedScrewdriversarealsosoldseparately,pleasecontactus for further details.!

TS-3

NSW+61 2 9893 9400


Victoria+61 3 9775 4778

Auckland+64 9 443 9500



Wiha profESSional ESdprEciSion for ElEcTronic profESSionalS

Wiha professional ESd.• Drop-forged from the best selected, suitable carbon steels for the

best technical properties• Cuttingedgesareadditionallyinductionhardenedupto64HRC

formaximumservicelifeandcuttingresults• Finely mirror polished heads provide safety as there are no flaking

chrome particles preventing damage to electronic components. Low glare.

• Precisionboxjoint:closefitpreventsdistortion,low-wearforclearance and jolt-free movement.

• Dualleafspringsandextremelyergonomicmulti-componenthandle provide for comfortable, controlled and sensitive work

• Complete anti-static dissipative handle for controlled dissipation of static charges by means of surface resistance of 10^6 - 10^9 ohms. Suitable for electronics works at ESD workplaces according to IEC 61340-5-1

Wiha Professional ESD pliers were developed especially for electronic professionals with stringent requirements regarding the precision and durability of cutting edges, clearance and jolt free movement while providing convenient and effortless operation.

The Professional ESD needle-nose pliersarepredominantlyusedforfinegrippingand bending work.

The Professional ESD side-cutter with abroad, pointed head cuts soft wires flush.

Safety information• Wiha Professional ESD pliers are noninsulated, therefore not

suitable for working on live parts.

eLecTrONic cuTTers

Application .............................. All round electronic diagonal cutter for cutting wires of different hardnessesHead shape .............................. Wide, semi-circular headMaterial ................................... High alloy carbon steel C 60Design ..................................... Bevelledcuttingedges,alsoappropriatefor thin,hardwires.Maximumservicelifeof cutting edge achieved through additional inductivehardeningtoapprox.64HRC. With opening springStandards ................................ DIN ISO 9654. IEC 61340-5-1

ESd diaGonal cuTTEr, WidE SEmi-circular hEad

product description length (mm) order code

WihaEsdCutterWideBevel115mm 115 P472647

cutting results

Symbol Types of Wire Example Tensile Strength ca. n/mm²

Soft Wire Copper, aluminium 220 - 250

MediumHardWire Iron nail 750 - 800

Hard Wire Spring wire, steel nails 1.600 - 1.800

1.4

1.0

0.4

Max.WireDia.(mm) See key below

Dimensions(mm)

ESd nEEdlE noSE STraiGhT

product descriptionlength (mm)

a b d forder code

Wiha Esd Needle Nose Straight 120mm

120 9.5 23 6.5 1.4 P472651

Wiha Esd Needle Nose Straight 145mm

145 12.0 40 7.5 2.0 P472652

Application .............................. Mainlyforprecisiongrippingandbending work.Head shape .............................. Straight head.Material ................................... C 45 Special tool steel, hardened and tempered.Design ..................................... Fine, semi-circular tips. Ridgedgrippingsurfaces. With opening spring.Standards ................................ DIN ISO 9654. IEC 61340-5-1

Dimensions(mm)

TS-4

NSW+61 2 9893 9400


Victoria+61 3 9775 4778

Auckland+64 9 443 9500



ESd nEEdlE noSE 45˚

Application .............................. Mainlyforprecisiongrippingandbending work.Head shape .............................. Angled at 45°.Material ................................... C 45 Special tool steel, hardened and tempered.Design ..................................... Fine, semi-circular tips. Smooth gripping surfaces. With opening spring.Standards ................................ DIN ISO 9654. IEC 61340-5-1


Wiha Esd Needle Nose 45Deg 120mm 120 P472653

eLecTrONic cuTTers / PLiers

ESd round noSE pliErS

Application .............................. Mainlyforprecisiongrippingandbending work.Head shape .............................. Round,shortjaws.Material ................................... C 45 Special tool steel, hardened and tempered.Design ..................................... Smooth gripping surfaces. With opening spring. Standards ................................ DIN ISO 9654. IEC 61340-5-1


EsdRoundNosePliers120mm 120 P472654

Dimensions(mm)

Dimensions(mm)

lindSTrom cuTTErS and pliErS

rX SEriES– The Ultimate in Performance, Precision and Comfort!

What Kind of Cutting Result do You Want?

• TopoftheMarketQualityandErgonomicDesign• ESDProtection• ShapedforPrecisionFingerwork• BIOSPRING®AllowsTensionAdjustmentandControlledHandleWidth• 63-65HRConCuttingEdges

a (mm) b (mm) c (mm) d (mm) f (mm)capacity

(mm)bevel

manf. part no.

133.5 8.5 8.0 5.0 0.8 0.2-1.25 Micro Rx8130

133.5 8.5 8.0 5.0 0.8 0.1-1.25 Flush Rx8131

133.5 8.5 8.0 5.0 0.8 0.1-0.8 Ultra Rx8132

135.5 10.5 10.0 6.0 0.8 0.2-1.25 Micro Rx8140

135.5 10.5 10.0 6.0 0.8 0.1-1.25 Flush Rx8141

135.5 10.5 10.0 6.0 0.8 0.1-1.0 Ultra Rx8142

138.0 13.0 12.5 6.0 1.2 0.3-1.6 Micro Rx8150

138.0 13.0 12.5 6.0 1.2 0.2-1.6 Flush Rx8151

138.0 13.0 12.5 6.0 1.2 0.2-1.25 Ultra Rx8152

147.0 16.0 16.0 8.0 1.6 0.4-2.0 Micro Rx8160

147.0 16.0 16.0 8.0 1.6 0.3-2.0 Flush Rx8161

147.0 16.0 16.0 8.0 1.6 0.3-1.6 Ultra Rx8162

diaGonal cuTTEr

Since 1856, Lindstrom has set the standard in precision tool

manufacturing. Lindstrom cutters and pliers achieve a level of

performance that cannot be matched.

• Ifthecuttingresultisnotcritical,thengowiththeMicro-Bevelasthis cutting edge bevel gives you the best capacity and life in most applications.• UsetheFlushifMicro-Bevelisnotsuitable.• UsetheUltra-Flushonlywhenrequired,asitrequiresthemostcare in use.

321

E S D - P R O T E C T I O N

A

F

B

CD

TS-5

NSW+61 2 9893 9400


Victoria+61 3 9775 4778

Auckland+64 9 443 9500



Tip cuTTEr

obliquE cuTTEr

flaT noSE pliEr

a (mm)

b (mm)

c (mm)

d (mm) f (mm) G (mm)capacity

(mm)bevel

manf. part no.

144.0 17.4 10.6 7.0 1.6 4.1 0.1-0.65 Ultra Rx8237

a (mm)

b (mm)

c (mm)

d (mm) f (mm) G (mm)capacity

(mm)bevel

manf. part no.

143.0 18.0 10.0 7.0 6.0 6.7 0.2-1.0 Flush Rx8247

a (mm) b (mm) c (mm) d (mm) E (mm) f (mm)Jaw

Shapemanf.

part no.

146.5 20.0 9.0 6.7 1.2 3.2 Smooth Rx7490

cuTTers & PLiers

80 SEriES– Tried and True Performance

• WellKnownandPopularSeries• 63-65HRConCuttingEdges• ESD-SafeSleevescanbeAddedbySpecialRequest

obliquE cuTTEr

a (mm) b (mm) c (mm) d (mm) G (mm)capacity

(mm)bevel

manf. part no.

117.5 18.0 10.0 6.0 6.7 0.2-1.0 Flush 8247

C D

B

G

45o

A

a (mm)

b (mm)

c (mm)

d (mm)

E (mm)

G (mm)

h (mm)

capacity (mm)

bevelmanf.

part no.

114.0 14.0 5.0 6.0 5.0 5.0 3.2 0.1-0.6 Flush 8149

Tip cuTTErC

ED

H

G

A

B

diaGonal cuTTEr

a (mm) b (mm) c (mm) d (mm) f (mm)capacity

(mm)bevel

manf. part no.

108.0 8.0 8.0 5.0 0.8 0.2-1.25 Micro 8130

108.0 8.0 8.0 5.0 0.8 0.1-1.25 Flush 8131

108.0 8.0 8.0 5.0 0.8 0.1-0.8 Ultra 8132

110.0 10.0 10.0 6.0 0.8 0.2-1.25 Micro 8140

110.0 10.0 10.0 6.0 0.8 0.1-1.25 Flush 8141

110.0 10.0 10.0 6.0 0.8 0.1-1.0 Ultra 8142

112.5 12.5 12.5 6.0 1.2 0.3-1.6 Micro 8150

112.5 12.5 12.5 6.0 1.2 0.3-1.6 Micro 8150J

112.5 12.5 12.5 6.0 1.2 0.2-1.6 Flush 8151

112.5 12.5 12.5 6.0 1.2 0.2-1.25 Ultra 8152

125.0 16.0 16.0 8.0 1.6 0.4-2.0 Micro 8160

125.0 16.0 16.0 8.0 1.6 0.4-2.0 Micro 8160J

125.0 16.0 16.0 8.0 1.6 0.3-2.0 Flush 8161

125.0 16.0 16.0 8.0 1.6 0.3-1.6 Ultra 8162

CDF

B

A

lindSTrom cuTTErS and pliErS conT.

TS-6

NSW+61 2 9893 9400


Victoria+61 3 9775 4778

Auckland+64 9 443 9500



a (mm) b (mm) c (mm) d (mm) E (mm) f (mm)Jaw

Shapemanf.

part no.

132.0 32.0 9.0 6.0 1.2 0.8 Smooth 7890

132.0 32.0 9.0 6.0 1.2 0.8 Serrated 7891

SnipE noSE pliErC

ED

F

B

A

PLiers / AsseMBLY eQuiPMeNT

iTEco producTion EquipmEnTcuT & bEnd machinES

aSSEmbly JiGS & racKS

Contact us for more information.

Contact us for more information.

ErSa analoG 60 SoldEr STaTion

description manf. part no.

Complete Solder Station ANA60

SpareIronw/832CDTip 670CDJ

2.2mm Chisel Tip 832CD

3.2mm Chisel Tip 832ED

0.4mm Pencil Tip 832UD

0.8mm Pencil Tip 832SD

1mm Pencil Tip 832BD

Solder Sucker VACX

Solder Sucker Tip VACX2

Temperature can be adjusted at the soldering station on a continuous scale between150°C(300°F)and450°C(840°F).Theeasy-to-handleERSABasictool60solderingironheatsupfromroomtemperatureto280°C(545°F)inonly 60 seconds.

A potential equalisation jack with a high-resistance connection to the soldering tip ensures the safety of sensitive components. The multifunctional holder with its swivelling sponge container also functions as a hot tip holder.

ana60 Electronic Station Supply voltage ............................230V~,50-60Hz Secondary voltage ...................... 24V~ Rating ......................................... 60W Control technique ......................Resistronic Temperature range .....................Stepless150°C(300°F)-450°C(840°F) Function display .........................RedLED Cable ..........................................2m(6.6ft)PVCwithconnector Model ........................................ Antistatic

basic Tool 60 Soldering ironVoltage....................................... 24V~ Rating .........................................75W/280°C(545°F)-60W/350°C(660°F) Heat up rating ............................ 190W Heat up time ..............................Approx.60sto280°C/545°F Weight(withoutcable) ...............Approx.60g(2.4oz) Cable ..........................................1.5m(4.9ft)highlyflexible/heatresistant

Theelectronicallytemperature-controlledERSAAnalog60isawell-

knownmodelinESRA’sseriesofsolderingstations.ThepreciseERSA

ResistroniccontrolsystemexpliotsthepositiveeffectofthePTC

(PositiveTemperatureCoefficient)heatingelement.Thehighheatup

rating of 190 W ensures an immediate supply of heat.

TS-7

NSW+61 2 9893 9400


Victoria+61 3 9775 4778

Auckland+64 9 443 9500



AsseMBLY eQuiPMeNT / sOLder

ErSa i-con nano SoldErinG STaTion

E S D - P R O T E C T I O NESD -SA FE

Designed for continuous use in professional industrial companies, the new ERSAi-CONnanoalsoofferssmallercompaniesamorebudget-orientedsolution for top quality hand soldering applications. The i-CON nano comes fully equipped with the i-Tool nano soldering iron. ThisultralightandpowerfulironusesexactlythesameheatingelementtechnologyastheERSAi-Tool.

features and options:

1. Smallfootprint(145x80mm)-savesvaluableworkbenchspace 2. FullyantistaticaccordingtoMIL-SPEC/ESAstandards 3. Threefixedtemperaturesettingsorcontinuoustemperaturesetting from 150°C up to 450°C 4. Three selectable energy levels 5. Ultralightandergonomicallydesignedi-Toolnanowithmax.80W of power 6. Large spectrum of low-cost & long life replaceable soldering tips 7. Automatic stand-by function and non-operative mode saves energy & tip life 8. Password lockout function for increased process control 9. Calibrationfunctionforexacttiptemperatures 10. Complete system parametrisation via simple PC software and SD card

description rating/Voltage heating time Temperature range

Weight manf. part no.

i-CON nano soldering station complete with i-Tool nano soldering iron 0120CDK, with soldering tip 0102CDLF16 and holder 0A50

withdrysponge0008M

max.80W/230V/50Hz,

350°C

approx.9s(350°C)

150°C - 450°C approx.30g 0IC1200A

MicroSDcardwithi-CONnanosoftwareandcardreader 0IC128

Small, strong and intelligent: ErSa i-con nano

TheALPHArangeofqualitysolderwiresforno-clean,water-solubleandRMAprocesses is specifically designed for hand soldering, component attach and touch-up for surface mount technology. All products are manufactured to ISO 12224-1 specification and test methods.

Universal no-clean solder pastes that conform to customer processes as well as environmental regulation.

ALPHA® productsEnablingTechnologyElectronicsAssemblyMaterials.ALPHA are committed to providing the global electronics assembly industry with a full line of products and services that:

• Meetthehighestindustrystandards.• Helpcustomersmeetprocesschallengessuchaslead-freeprocessing.• Deliverconsistentlyhighthroughputandyield.• Providethelowestcostofownership.

ALPHA® Environmentally-friendly productsCookson Electronics has developed environmentally-friendly products for manyyearsthatofferlead-free,low-and/orno-VOCandlow-and/ornohalogenbenefitstoelectronicassemblers.TheseGreenline®products,aswe call them, help customers run cleaner, greener processes and produce products that are safer to use and safer to handle at the end of their productlifecycle.YouwillfindALPHAGreenlineproductsinALPHAsolderpaste,wavesolderbarandflux,pasteflux,preformandcoredwirelines.

Solder Products and Soldering Solutions

TS-8

NSW+61 2 9893 9400


Victoria+61 3 9775 4778

Auckland+64 9 443 9500



alpha SoldEr WirE

• Forallhandandautomatedsoldering,componentattachandrework• Minimal,non-corrosivefluxresiduesforhighsolderingefficiency• Evencorefluxdistribution• Goodsolderability,strongjoints• Rosin/resinandlead-freeoptions• Meetsleadingspecifications

• World’sno.1Sellingcoredsolderwire• No-clean,activatedrosinfluxconformingtoJ-STD-004ROL0• Bellcorecompliant• Clear,tack-free,non-corrosiveresidues,highsir

alpha TElEcorE pluS

alpha nrG (EnErGiSEd)

Wire diameter

(mm)

roll Weight

order code

nrG Tin/lead

63/37

Telecore + Tin/lead

63/37

Telecore + 2% lead free

Sac305

Telecore + 1.2% lead

free Sac305

0.51 454g P612652

0.51 500g P611944

0.61 500g P612478

0.81 1kg P611969 P611993 P612487 P612394

1.02 1kg P611971 P611977

1.27 1kg P612363 P612003

• Higheractivityflux,fastactingandefficient• MeetsQQ-S-571ESpecifications

The Alpha range of quality

solderwireisspecifically

designed for hand soldering,

component attach and

touch-up for surface

mount technology and are

manufactured to ISO 12224-1

specificationandtestmethods.

sOLder

alpha SoldEr paSTE

alpha om-5100 Solder paste• Broadlatitude,no-cleansolderpaste;appropriateformosttin-lead SMTapplications• SolderingwithHigherreflowyieldswithexcellentprintdepositconsistency• Reducedrandomandmid-chipsolderballsandothersolderingproblems

alpha om-6106 Solder paste• Suitableforultra-finepitchapplicationssuchas0.5mmpitch Flip-Chip and 0201 assembly• Efficientactivationsystemprovidingdefectfreesolderingwithfastoven throughputtimes(2.5minutestimetopeak).• Lowresiduelevelwithminimalspreadforreliableunderfillingprocesses and results.

Tin/lEad

Highest throughput and yield, and lowest cost of ownership

fortoday’schallengingelectronicassemblyprocesses.

alpha SoldEr paSTE conT. lEad frEE –ZHP=ZEROHalogenProduct

alpha om-338 T (Zhp) Solder paste• Broadlatitude,no-cleansolderpaste;appropriateformostlead-free solderingSMTapplications• Widereflowprocesswindowandoutstandingvoidingresistance• Ultra-finepitchprintingcapabilityatupto200mm/sec.(8in./sec) print speed

alpha om-338 pT (Zhp) Solder paste• Excellentin-circuitpintestability• Superiorsolderingperformanceinclosed-headprinters• Wideprintprocesswindowupto150mm/sec.(6in./sec.)

alpha om-340 (Zhp) Solder paste• Broadlatitudelead-free,no-cleansolderpaste• Excellentin-circuitpintestability• Bettersolderingspreadandwetting

alpha om-350 (Zhp) Solder paste• Reduceddefectssoldering(voiding,mid-chipsolderballs,BGApillows)• Excellentpin-in-through-holeperformance• Best-in-classreliability• Excellentprintvolumerepeatabilityupto100mm/sec.printspeed

Type Series packaging order code

Tin/Lead63/37 OM-5100 500g jar P602709

Tin/Lead63/37 OM-6106 1kg cartridge P602492

Lead Free SAC305 OM-338T 500g jar P602425

Lead Free SAC305 OM-338PT 600g syringe P602710

Lead Free SAC305 OM-340 500g jar P602711

Lead Free SAC305 OM-350 500g jar P602712

HALOGEN

alpha SoldEr bar

VACULOY solder bar is manufactured by a patented process which produces solder of high purity with very low levels of non metallics and metallic contaminants.

HI-FLO solder bar is manufactured by a unique series of viscosity and dross reduction operations before being alloyed and cast in a nitrogen treated system.Thisproducesahighpurity,exceptionallylowdross,highlymobileelectronics grade solder designed for use in all wave soldering processes.


Tin/Lead63/37 Hi-Flo 20kgbox P631981

Tin/Lead63/37 Vaculoy 20kgbox P631980

Lead Free SAC305 Vaculoy 20kgbox P632458

Lead Free SACX0307 Vaculoy 20kgbox P632395

ALPHA® wave soldering metals offer best value soldering performance -quality product at

lowest cost of ownership. • Highpurity • Excellentsolderability• Goodwetting• Lowoxides,lowdrossing• Solderbar,chunks,anodes, preforms and solid wires

TS-9

NSW+61 2 9893 9400


Victoria+61 3 9775 4778

Auckland+64 9 443 9500



sOLder / TAPes

alpha WaVE SoldEr fluX


Conventional,AlcoholBased EF-6100 19L bottle P252473

VOCFree,WaterBased EF-2202 19L bottle P252364

HalogenFree,AlcoholBased EF-6850HF 19L bottle P612653

alpha STEncilS

• HighRepeatability• HighAccuracy:ProduceddirectlyfromthemodifiedCAD/CAMdata, positionalaccuraciesof±1.0mil(±25micron)canbeachievedover a17”x17”(432x432mm)areawithaprocesscapabilityindexes(Cpk) inexcessof1.33• UltimateAvailablity:Aglobalmanufacturingnetworkprovides fast-turnaround lead times when and where required• Fine-PitchPrinting:targetedforprintapplicationsupto20mil (0.5mm)pitch• PredictablePrintingResults

Selectingtherightfluxiscritialtosuccessful soldering.Thefluxmustremoveoxides,surfacefilmsandtarnishestoexposecleansurfacesforoptimumwettingandsolderbondformation.ALPHAfluxesaremanufacturedwithspecificactivationlevelstomeetspecificapplications.

VOCfreefluxes(waterbased)offermanyadvantagesoverconventionalalcoholbasedfluxes -environmentally friendly, improved safety, significant cost saving due to no IPA thinner required, low odour,novisibleresidues(aswithmostsoldermasks),lessfrequent titration and no precipitation or bacteria growth.

roll Size order code

19mmx33m I201137

25mmx33m I201226

38mmx33m I201227

ScoTch 22 h/duTy pVc TapE

Applications ....................... Busbarinsulation.Cablejacketrepair. Mechanicalstrength&abrasionresistanceTemp. range ....................... Up to 105º CThickness............................ 10 mil Increased strength & Abrasion resistanceUV resistant ........................ ExceedsUL510requirements

• Self-fusingwithliner,forhighandlowvoltageinsulating.Goodprimary electrical insulating for splicing all solid dielectric cables to 69kV


19mmx9.1m I201228

25mmx9.1m I201210

36mmx9.1m I201229


25mmx4.5m I991230

ScoTch 23 rubbEr SplicinG TapE

ScoTch 27 GlaSS cloTh TapE

roll Size colour order code

19mmx20m Blue I201233

19mmx20m Green I201234

19mmx20m Red I201186

19mmx20m White I201235

19mmx20m Yellow I201236


12mmx20m I201231

19mmx20m I201232

ScoTch 24 Tin coppEr braid

Applications ....................... All metal weave shielding braid, temperature stable. Provides continuous electrostatic shielding across a splice.Properties ........................... All metal open weave shielding braid. Conformable. Temperature stable.

Applications ............................ Heat stable insulation for furnace and oven controls, motor leads and switchesProperties ................................ Woven insulating glass cloth. High temp resistance. High mechanical strength.Temp. range ............................ Up to 130º CThickness................................. 7 mil

ScoTch 35 pVc TapE

Acceptable voltage ................... Up to 600 VApplications ............................. Primary insulation, phase ID and marking and harnessing. Fade resistant colour.Temp. range ............................. -18º C up to 105º C

TS-10

NSW+61 2 9893 9400


Victoria+61 3 9775 4778

Auckland+64 9 443 9500




24mmx9.1m I201237

ScoTch 70 SiliconE rubbEr TapE

Applications .............................. Arc and track resistant, self fusing and long lasting. Protective overwrap for terminating HV cables.Temp. range .............................. Up to 180º C

TAPes


19mmx9.1m I201134

24mmx9.1m I201238

38mmx9.1m I201239

ScoTch 130c linErlESS amalGamaTinG TapE

Acceptable voltage ............. Up to 69 kVApplications ....................... Primary insulation for splicing all Solid Dielectric Cables through 69kVProperties ........................... HV Insulating. Thermally conductive. Self bonding.Temp. range ....................... 90°C(Continuous)upto130°CMax(Shortterm)Thickness............................ 30 milUV resistant ........................ No


95mmx3m I201242

Acceptable voltage .................. Up to 600 VApplications ............................ Sealing HV cables and accessoriesApplications ............................ Insulate, moisture seal and pad connectionsTemp. range ............................ Up to 80º CThickness................................. 65 milUV resistant ............................. NobTe(Continuous)upto130°CMax(Short)


19mmx20m I201184

19mmx33m I201240

25mmx33m I201241

ScoTchfil inSulaTinG puTTy


38mmx1.5m I991250

ScoTch SupEr 33+ pVc TapE

Acceptable voltage .................. Up to 600 VApplications ............................ FlameRetardantandInsulatesSplicesUp to 600 Volts.Flame retardant ....................... YesProperties ................................ Allweatherapplication.ResistsUV, abrasion, corrosion, alkalies and acidsTemp. range ............................ -18º C up to 105º CThickness................................. 7 milUV resistant ............................. Yes

ScoTch 2229 maSTic TapE

Applications ............................ SmoothirregularitiesonfittingsandvalvesProperties ................................ Black,self-fusing,insulatingputtyin tape formTemp. range ............................ Up to 80º C Thickness................................. 125 mil

ScoTch 1710 & 1352b pVc TapE

pack Size colour order code

10Rolls,18mmx20m Black I201148

10Rolls,18mmx20m Blue I201157

10Rolls,18mmx20m Green I201156

10Rolls,18mmx20m Red I201144

10Rolls,18mmx20m White I201150

10Rolls,18mmx20m Yellow I201155

10Rolls,18mmx20m Rainbow I201201

1Roll,50mmx30m Black I201243

Approvals ................................ UL,CSA,VDE,SEV,andSEMKOMaterial ................................... UL approved nylon 66 Acceptable voltage .................. Up to 600 VApplications ............................ Primary insulation for wire and general purpose useCertification ............................ UL and CSAMaterial ................................... Polyvinyl Chloride

TS-11

NSW+61 2 9893 9400


Victoria+61 3 9775 4778

Auckland+64 9 443 9500



TEmflEX 1755 fricTion TapE


19mmx18m I201244

Temp. range ............................90°C(Continuous)upto130°CMaxThickness.................................65 milHighgradefrictiontape.Goodabrasionresistance.

TAPes / MicrOscOPe

ScoTchcodE STd WirE marKinG SySTEm

order code

I991245

Features• Tenrefillablecompartmentscontaining0-9• Compactdesign• Hangsfromatoolbelt• Providescontaminationprotectionaroundwiremarktes• Canbecustomfilledtomeetspecificprojectrequirements• Dispensesonlythedesiredlength• HoldstenrollsofSDRwiremarkingtape Lables/roll• 70Markersize• 1x5”Write-on area • 1x0.75”

• PremiumGradeClothTape.QualityPlasticCoatingwithAggressiveRubberAdhesive.


36mmx30m I991246

48mmx30m I991247

TarTan 3939 ducT TapE, SilVEr

ScoTch 389 ducT TapE, SilVEr

ScoTch 425 alloy foil TapE


50mmx55m I991248

• ForGeneralSealing,MetalPatching,MoistureBarrierandHeatReflection


50mmx55m I991249

5419 KapTon (polymidE) film TapE

Translucent,polymidefilm-backedsiliconeadhesivetapewithuniqueandextremelylowelectrostaticdischargeproperties.


6.35mmx32m 5419-1/4

12.7mmx32m 5419-1/2

19mmx32m 5419-3/4

38.1mmx32m 5419-1.5

50.8mmx32m 5419-2

SJ3540 dual locK rEcloSablE faSTEnEr

BlackHookandLoopFasteners(250stemspersquareinch),blackfoamadhesiveandwhitepolythenefilmliner.


25.4mmx45m SJ3540

• Goodtensilestrengthfortoughapplications• Resistsmoisture

acTiVE componEnTS uSb camEra microScopE

order code

Z995410

Tripod and Software included.

TheActiveComponentsUSB Microscopeisaveryusefultoolfor inspecting printed circuit boards and checking the quality of solder joints. Other applications include checking for counterfeiting, educational research or any generalmacro(close-up)photography.

SpecificationsImaging sensor ...........................2.0MegaPixelFocus range ................................ManualFocusfrom1.5mmto5.2mmStill image ...................................Formats:JPEGBMPVideo ......................................... Formats: AVIVideo resolution .........................1600x1200,1280x960, 1280x800,1024x768,800x600&640x480Video FPS ...................................30FPSunder640x480&800x600Light source ................................ 4 White LED Lights

tools solder and materials

Documents

precision handle

pc set dissipative handle

handle end

pc p652707note

electrical safety

national safety

safety information

special handle geometry