tools equipment section
TRANSCRIPT
The Largest Independent O&P Distributor
8 0 9E Q U I P M E N T
EQ
UIP
ME
NT
EQUIPMENTHand Tools Measuring Devices .....................................811 Cutting Tools ..............................................813 Scissors and Shears .....................................817 Punches and Riveting Tools .......................819 Contouring and Bending Devices .............820 Drill Bits and Accessories ...........................821 Heat Guns and Accessories ....................... 822 Miscellaneous Hand Tools .........................824Alignment and Fitting Aids ..........................826Vices ................................................................827Router and Sanding ......................................828Vacuum Equipment .......................................837Ovens ............................................................. 838
Cascade Orthopedic Supply, Inc. | 800-888-0865 | www.cascade-usa.com
8 1 0 E Q U I P M E N T
EQ
UIP
ME
NT
E Q U I P M E N T Hand Tools 8 1 1
The Largest Independent O&P Distributor
EQ
UIP
ME
NT
MEASURING DEVICES
a. Retractable Measuring Tape
60” length. Retractable flexible vinyl in compact plastic casing. Inch over metric. Handy metal hook at end.
Sold each. From BMI Tools.
Item No. ð RMT-60
b. Standard Measuring Tape
60” length. Flexible fiberglass construction. Inch and metric both sides. Various colors. Sold each. From Fillauer.
Item No. ð SMT-60
c. Goniometer with Level and Protractor
Combination level and adjustable protractor. Ideal for obtaining measurements that are relative to a hori-
zontal plane. Sold each. From Hosmer.
Item No. ð 51848
d. Goniometer
Clear plastic with black markings. Sold each. From Trulife.
Item No. ð 40049
e. Cobb Scoliosis Ruler
Measures the degree of curvature of the spine on an x-ray. 2-3/8” width. 6-3/4” length. Clear plastic with
black markings. Sold each. From Trulife.
Item No. ð 228001
Cascade Orthopedic Supply, Inc. | 800-888-0865 | www.cascade-usa.com
E Q U I P M E N T8 1 2 Hand Tools
EQ
UIP
ME
NT
MEASURING DEVICES — Continued
a. Transfemoral Length Gauge
Measures in inch and metric. Sold each. From Fillauer.
Item No. ð 220137
b. Transtibial Length Gauge
Measures in inch and metric. Sold each. From Fillauer.
Item No. ð 220145
c. AP-ML Gauge
Measures in inch and metric. Sold each. From Fillauer.
Description Item No.ò
Universal Gauge with Level, 17 220336
Original AP-ML Gauge, 22” 220335
d. BK Measuring Calipers
Used for measuring transtibial limbs in the M-L and A-P planes. Sold each. From Trulife.
Item No. ð T095000000
e. Compact Scale
Reads up to 2,000 grams in 1 gram increments. Sleek low profile design. Large high contrast LCD display. Energy
saving auto shut-off feature. Battery or AC powered. Rugged plastic construction. Sold each. From ACME Scale.
Item No. ð CS2000
E Q U I P M E N T Hand Tools 8 1 3
The Largest Independent O&P Distributor
EQ
UIP
ME
NT
CUTTING TOOLS
f. Scarpas Knife
Two blade sizes. Sold each. From Fillauer.
Blade Size Small Large
Item No. ð 220461 220460
g. Tubing Cutter
I-beam construction, hardened wear surfaces and thrust bearing slide assemblies for smooth operation. Sold
each. From Grainger and Friddle’s Orthopedic.
Item No. ð 33055
RTC-205-R Replacement Blade
33190 Replacement Wheel
h. Cast Modification Handle
The perfect size—not too big that it’s in the way, and not too small that you can’t hang onto it during ag-
gressive modifications. Easy to use and clean. Reduces blade breakage and is used with flat or half rounds.
Also fits 10” Surform® blades. From Coyote Design.
Color Blue Pink
Item No. ð CD309 CD309P
DISCON Replacement Blades, Flat, 10/Pack
DISCON Replacement Blades, Half Round, 10/Pack
i. Surform® Flat File
Includes regular cut flat blade with edge cut for inside corners. Sold each. From MSC Industrial Supply and
WBC Industries.
Description Item No.ò
Flat File Complete 21-295
21-293 Replacement Blade
j. Surform® Round File
14-1/4” overall length. Round regular cut hardened steel blade is 5/8” in diameter. Sold each. From MSC
Industrial Supply and SPT Technology.
Description Item No.ò
Round File Complete 21-297
21-291 Replacement Blade, Round 21-299 Replacement Blade, Half Round
Cascade Orthopedic Supply, Inc. | 800-888-0865 | www.cascade-usa.com
E Q U I P M E N T8 1 4 Hand Tools
EQ
UIP
ME
NT
CUTTING TOOLS — Continued
a. Plastic Edging/Deburring Tool
Sold each. From Fillauer and Titan Tool Supply.
Item No. ð 220321
E-100 Replacement Blade
b. Deluxe Plastic Edging Tool
Blade swivels 360°. Hollow handle stores three blades (included). Sold each. From Titan Tool Supply.
Item No. ð GB-E
E-100 Replacement Blade, A
E-200 Replacement Blade, B
E-300 Replacement Blade, C
c. Ceramic Deburring Tool
Great for deburring and shaping edges on AFOs. Features a superior design that will deburr hard plastics
effortlessly without the fear of cutting your hand. Ideal for curved and complicated shapes. Excels on ultra-
hard resins like glass fiber, carbon fiber, and talc filled plastics. Can also be used on soft metals like aluminum,
copper, and brass. Blade requires no resharpening. The blade and handle measure 6.75” and the length of
the blade is 1.5”. Sold each. From WBC Industries.
Item No. ð SC-100DT
d. Stanley® Retractable Utility Knife
Features multi-position blade slide and blade storage in handle. Includes 3 blades. Sold each. From Grainger.
Item No. ð 10-099
e. Stanley® Blade Dispenser
100 blade pack. Sold each. From Grainger.
Item No. ð CDT-100
E Q U I P M E N T Hand Tools 8 1 5
The Largest Independent O&P Distributor
EQ
UIP
ME
NT
f. Scalpel Handle and Blades
Scalpel handles sold each. Blades sold 100/pkg. From Moore Medical and Dynarex.
Description Item No.ò
Scalpel Handle No. 3 202886
Scalpel Handle No. 4 5020-H4
MooreBrand® Surgical Blades No. 10 No. 11 No. 15 No. 20
Stainless Steel Sterile - 39356AK - 54239
Carbon Steel Sterile - - 37811 -
Carbon Steel Non-Sterile 37810AK 37809 - -
Dynarex Medi-Cut Surgical Blades No. 20 No. 21 No. 22 No. 23
Item No. ð SB-20 SB-21 SB-22 SB-23
g. American Orthopaedic™ Cast Cutter
Specially designed for rugged use. Balance of weight and power helps reduce user fatigue. Internally lubri-
cated for extended life. Hex drive. 10 ft cord with hospital grade plug. 115 VAC, 50-60 Hz, 1.5 amps. Sold
each. From BSN Medical.
Item No. ð 0295-200
h. Dotco Pneumatic Cast Saw
Oscillating saw cuts through fiberglass, plaster and plastic. 0.6 Hp. 2-1/2” blade capacity. 8.9” length. 1/4” air
inlet. 90 psi. Sold each. From California Pneumatic Tool.
Item No. ð 12L2065-90
i. 940 Cast Cutter
A multi-purpose cast removal tool with an ergonomic design that optimizes user control and comfort. Dual
speed cutting to meet varied cast removal needs. Compact design to enhance maneuverability. Sold each.
From Stryker®.
Item No. ð DISCON
DISCON Ion Nitrided Blade, Nonsterile, 1/pkg
DISCON Stainless Steel Blade, Nonsterile, 4/pkg
DISCON Ion Nitrided Blade for Cast Cutter Model 840, 1/pkg
j. Cast Cutter Blade
Universal hub. Sold each. From BSN Medical and Ortho-Care.
Diameter 2” 2-1/2”
Stainless Steel CC1-002 CC1-001
Titanium Coated CC2-0X CC2-5X
Cascade Orthopedic Supply, Inc. | 800-888-0865 | www.cascade-usa.com
E Q U I P M E N T8 1 6 Hand Tools
EQ
UIP
ME
NT
CUTTING TOOLS — Continued
a. Cast Cutter Blades
Universal hub fits both pin and hex drives. Hardened stainless steel. 4183-110 and 4183-112 sold 6 per pack-
age. All others sold each. From BSN Medical.
Coating Teflon® Titanium Dicronite® None None Nitride
Plaster 3 3 3 3 3
Synthetics 3 3 3
Composites 3 3 3
Plastic 3 3 3
2” 4183-114 N/A N/A 4183-110 0295-219
2-1/2” 31-0265 31-0168 0295-226-BS 4183-112 31-0261
2-1/2” Sectioned N/A N/A N/A 4183-145 N/A
b. Diamond Cast Cutter Blade
Constructed with a layer of diamonds around the diameter of the blade instead of teeth for durability and
fast cutting. Sold each. From Diamond Tool Supply.
Description Item No.ò
2-1/2” with Universal Hub SBUH-25
2-1/2” with Universal Hub, Sectioned SBUH-25-SECT
3” with Round Hub SBSS-30
c. 840 Cast Cutter Blade
Ion nitrided blade for Stryker Cast Cutter Model 840. Sold each. From Stryker.
Item No. ð DISCON
d. Motor Brush
Sold each. From Stryker.
Item No. ð DISCON
E Q U I P M E N T Hand Tools 8 1 7
The Largest Independent O&P Distributor
EQ
UIP
ME
NT
SCISSORS and SHEARS
e. Tailor’s Points Scissors
Knife edge. Sharp points. Ring bow pattern. Double-plated (chrome over nickel). 5” length. Sold each. By
Gingher from WBC Industries.
Item No. ð 482H-5
f. Utility Shears
Double plated (chrome over nickel). 8” length. Sold each. By Gingher from WBC Industries.
Description Item No.ò
Blunt Points, Knife Edge 9080C-8
Sharp Points, Knife Edge 9480C-8
g. Large Bent Trimmers
Sharp points. Double-plated (chrome over nickel). Easy adjust, flush mount pivot assembly. Sold each. By
Gingher from WBC Industries.
Length 10” 12”
Item No. ð 8500C-10 8500C-12
h. Textile Scissors
Stainless steel ice-tempered blade designed for maximum cutting performance and long life. Botec Cut®
curved blade for easy continuous cutting. Skin friendly soft rubber grip. Sold each. From WBC Industries.
Description 8” Length 9.5” Length 10” Length 10” Length Heavy Duty*
Item No. ð 72020-WB 73224 72025 73225
i. Bandage Scissors
7” length. Stainless steel. Sold each. From AliMed.
Item No. ð 31-704
Cascade Orthopedic Supply, Inc. | 800-888-0865 | www.cascade-usa.com
E Q U I P M E N T8 1 8 Hand Tools
EQ
UIP
ME
NT
SCISSORS and SHEARS — Continued
a. Lister Bandage Scissors
Extra fine blades. German. 5-½” length. Sold each. From AliMed.
Item No. ð 98SCS1-12
b. Economy Bandage Scissors
Sold each. From Medline Industries.
Length 5-1/4” 7”
Item No. ð 301 302-CG
c. Bandage Scissors
Sold each. From Medline Industries.
Item No. ð 320BK
d. 7-¼” Lister Bandage Scissors
Sold each. From San Fernando Distribution Company.
Item No. ð 1007
e. Sock Removal Scissors
Sold each. From STS.
Item No. ð 1006-ST
E Q U I P M E N T Hand Tools 8 1 9
The Largest Independent O&P Distributor
EQ
UIP
ME
NT
f. Bandage and Plaster Shears
Stainless steel. Sold each. From UCO International.
Description Item No.ò
Mini Bandage Scissors, 90mm 52/5363-090
Super Mite Serrated Cutter 50/1550-125
Lister Bandage Scissors, 180mm (pictured) 52/3550-180
Plaster Scissors, 220mm 52/5359-220
Plaster Scissors “Excentric”, 190mm 52/5362-190
PUNCHES and RIVETING TOOLS
g. Revolving Punch
Frame made of highly polished forged steel. Cutting tubes are turned from special carbon tool steel and
threaded to allow easy replacement. Sold each. By C.S. Osborne from WBC Industries.
Description Item No.ò
Revolving Punch with 6 Tubes 155 0-7
Replacement Tubes, Set of 6 155T 0-7
Extra Anvil 155-A
Replacement Tube Size 0 Size 1 Size 2 Size 3 Size 5 Size 7
Item No. ð 155T-0 155T-1 155T-2 155T-3 155T-5 155T-7
h. Rivet Setter
Sold each. By C.S. Osborne from WBC Industries.
Size #8 #9 #10
Item No. ð 170-8 170-9 170-10
i. Laurence Standard Rivet Set
6 piece set. Includes wooden case. From Laurence of Oakland.
Item No. ð S150
Cascade Orthopedic Supply, Inc. | 800-888-0865 | www.cascade-usa.com
E Q U I P M E N T8 2 0 Hand Tools
EQ
UIP
ME
NT
PUNCHES and RIVETING TOOLS — Continued
a. Laurence Deluxe Rivet Set
9 piece set. Includes wooden case. From Laurence of Oakland.
Item No. ð S151
b. ProLine Tools® Rivet Set
Includes four sets (3/32”, 1/8” and 5/32”), two draw (sizes 8 and 12). Nickel-plated low carbon case hardened
steel. Round stand included. Sold set.
Item No. ð PL-600
c. ProLine Tools® Riveting Bar
Heat treated alloy steel riveting bar. 27” length. PL-92102-S houses three removable anvils (one each: convex,
flat and concave).
Description Item No.ò
Riveting Bar PL-92102
Riveting Bar with Removable Anvils (pictured) PL-92102-S
Replacement Anvil Set (one each: convex, flat and concave) PL-92102-A
CONTOURING and BENDING DEVICES
d. Stirrup Bender
Sold each. From Fillauer.
Item No. ð 220038
E Q U I P M E N T Hand Tools 8 2 1
The Largest Independent O&P Distributor
EQ
UIP
ME
NT
e. Stirrup Bender
Sold each. From Trulife.
Item No. ð T041000000
f. Contouring Irons
Nickel plated bronze. Wide-radius jaws. Will not mar finished metal or leather work. Sold pair. From Fillauer.
Item No. ð 220285
g. Bending Irons
High quality forged steel. Heat treated and plated. Two head thicknesses. Sold pair. From Trulife.
Head Thickness 3/4” 1/2”
Item No. ð 204001 204003
h. ProLine Tools® Bending Irons
Precision machined from high quality steel. One end accommodates material 3/16” or less. The opposite end
accommodates up to 1/4”. Smooth, rounded jaw radius allows proper bends without damage. 3/4” width.
Sold pair.
Item No. ð PL-800
DRILL BITS and ACCESSORIES
i. Drill Bit Set
29 piece set ranges from 1/16” to 1/2”; 13 piece set from 1/16” to 1/4”. From Western Tool Supply.
Description Item No.ò
29 Piece Set DBS-29
13 Piece Set DBS-13
Cascade Orthopedic Supply, Inc. | 800-888-0865 | www.cascade-usa.com
E Q U I P M E N T8 2 2 Hand Tools
EQ
UIP
ME
NT
DRILL BITS and ACCESSORIES — Continued
a. Drill Bits
Sold each. From Grainger.
Size 1/32” 1/8” 9/64” 5/32” 3/16” 13/64”
Item No. ð DB-132 DB-018 DB-964 DB-532 DB-316 DB-1364
Size 1/4” 23/64” 29/64” 15/32” 31/64”
Item No. ð DB-014 DB-2364 DB-2964 DB-1532 DB-3164
Size #12 #18 #21 #28 #30
Item No. ð DB-12 DB-18 DB-21 DB-28 DB-30
b. Mixing Blade
Made of 304 polished stainless steel. Designed for medium jobs in 1-2 gallon containers. Easily fits any 1/4”
electric chucked power tool. Maximum speed 800 RPMS. Tools with 450-750 RPMS get the best rate of thor-
ough mixing. Can be permanently installed. 30” (762mm) shaft length. Sold each. From Jiffy Mixer.
Item No. ð HS-304-L
c. Reverse Spotfacer and Pilot
Reverse spotfacers are designed for use in restricted areas where conventional spotfacers cannot be utilized.
High speed steel construction. Plain pilot featuring bayonet lock design sold separately. From U.S. Industrial
Tool and Supply.
Diameter 1/4” 5/16” 3/8” 7/16” 1/2” 1/2”
Hole Size 1/8” 3/32” 3/16” 5/32” 5/32” 3/16”
Spotfacer TP491-1/4R TP492-5/16P TP493-3/8T TP494-7/16S TP495-1/2S TP495-1/2T
Use Plain Pilot TP510R TP510P TP510T TP510S TP510S TP510T
HEAT GUNS and ACCESSORIES
d. Master Varitemp® Heat Gun
Lockable variable temperature control allows locked setting from ambient to 1000° F. Powerful, high speed
universal motor. Sturdy die cast housing. Adjustable non-slip stand. Weight 3.8 lb. 120 V. Sold each. From
Master Appliance.
Item No. ð 10298
E Q U I P M E N T Hand Tools 8 2 3
The Largest Independent O&P Distributor
EQ
UIP
ME
NT
e. Master Heat Gun
High temperature and power ratings. Air flow 23 CFM at 3,000 FPM. Sturdy die cast housing. Adjustable
non-slip stand. Weight 3.7 lb. 120 V. Sold each. From Master Appliance.
Description Item No.ò
Model HG-501A, 500° to 750° F 10104-MA
Model HG-751B, 750° to 1,000° F 10109
HAS-011K Replacement Element for HG-501A
HAS-043K Replacement Element for HG-751B
51309 Pinpoint Attachment, 1/4”
f. UltraHeat™ Heat Gun
Dual temperature or variable temperature. Sold each. From Steinel.
Description Item No.ò
Model SV-800, Dual Temperature, 600° and 900° F 34100
Model SV-803, Variable Temperature to 1,000° F 34103
07062 Reducer Nozzle, 9mm
07071 Reducer Nozzle, 14mm
07081 Reducer Nozzle, 20mm
07011 Spreader Nozzle, 50mm (2”)
g. Three-Stage Professional Heat Gun
Multi-purpose heat gun with cool air stage and choice of two temperature settings for convenient hand-held
or benchwork. Steinel’s exclusive DuraTherm™ heating element ensures long life and even heat. Accepts a
full range of nozzles and accessories. Sold each. From Steinel.
Item No. ð 34820
h. Variable Temperature Electronic Heat Gun
Powerful heat gun with variable temperature and electronic thermocouple control for flexible use and maxi-
mum reliability. Steinel’s exclusive DuraTherm™ heating element ensures long life and even heat. Accepts a
full range of nozzles and accessories. Sold each. From Steinel.
Item No. ð 34830
Cascade Orthopedic Supply, Inc. | 800-888-0865 | www.cascade-usa.com
E Q U I P M E N T8 2 4 Hand Tools
EQ
UIP
ME
NT
MISCELLANEOUS HAND TOOLS
a. PVA Sealing Iron
Teflon® covered shoe for sealing polyethylene and other plastic film. Accurately balanced. Durable construc-
tion. Thermostatic heat setting control 175° F to 550° F. 110V. 150W. Sold each. From Clamco.
Description Item No.ò
PVA Sealing Iron 50-T
1-122 Replacement Teflon® Boot
1-125 Replacement Metal Clip and Teflon® Boot (Set)
b. Yates Clamp
Three sizes. Sold each. From Monogram Aerospace Fasteners.
Length 3-1/4” 3-3/4” 4-3/4”
Item No. ð W-01 W-02 W-03
c. Cast Spreader
High quality stainless steel construction with spring-loaded handle for one hand operation. Sold each. From
Moore Medical.
Description Item No.ò
Cast Spreader, 3-Prong 68178
Cast Spreader, 4-Prong 0082-000-000
d. Spatula Mixing Knife
Sold each. From PEL Supply Company
Item No. ð S2494
e. Balldriver Screwdriver
4mm. Sold each. From WBC Industries.
Item No. ð 10660
E Q U I P M E N T Hand Tools 8 2 5
The Largest Independent O&P Distributor
EQ
UIP
ME
NT
f. Balldriver T-Handle
4mm. Sold each. From WBC Industries.
Item No. ð 13160
g. T-Handle Hex Wrench
4mm. 6” length. Sold each. From WBC Industries.
Item No. ð 15260
h. Corking Tool
Used to install all catches on knee joints. Sold each. From Becker Orthopedic.
Description 1/8” 3/16”
Corking Tool T-18 T-16
BCB-18 Ball Bearing, 1/8”
BCB-316 Ball Bearing, 3/16”
BCS-18 Spring, 1/8”
BCS-316 Spring, 3/16”
i. Staple Gun and Staples
Staple gun sold each. Staples sold 4-pack (5,000 quantity). From Western Tool Supply.
Description Item No.ò
Staple Gun T-50-GUN
Staple Size 1/4” 5/16” 3/8” 1/2” 9/16”
Item No. ð T-50-14 T-50-516 T-50-38 T-50-12 T-50-916
Cascade Orthopedic Supply, Inc. | 800-888-0865 | www.cascade-usa.com
E Q U I P M E N T8 2 6 Alignment and Fitting Aids
EQ
UIP
ME
NT
ALIGNMENT and FITTING AIDS
a. Universal Alignment Fixture
Sold each. From Fillauer.
Item No. ð 220128
b. Joint Alignment Tool
Used to assist in aligning joints of bent stirrup. 1/4” diameter. 8” length. Sold each. From Fillauer.
Item No. ð 220020
c. Vertical Fabrication Jig (VFJ-100)
Vertical orientation allows continuous alignment during all phases of duplication and fabrication process.
Sold each. From Hosmer.
Item No. ð 52056
52057 Post Assembly 52075 Bolt 55992 Mandrel Bushing
52106 Collar Assembly 52076 Plate 52103 Mandrel Bushing
52086 Screw Assembly 51674 Bolt 72334 Cord
52084 Center Screw Assembly 52071 Ankle Bracket Assy 52109 Plumb Bob
52079 Thumb Screw Set 52082 Yoke Assembly 52108 Plumb Bob Support
50270 Washer 52088 Socket Clamp Assy 52062 Clamp Assembly
VFJ-107 Mandrel Bushing
d. ProLine Tools® Prosthetic Fitting Stool
Main support ratchets by one-inch increments to accommodate different leg lengths. Overall height ranges
from 11” to 26”. Solid, tread-covered platform can be adjusted up or down for a perfect fit and locked into
position. Non-skid feet provide stability. Supports up to 350 lb. Sold each.
Item No. ð PL-STOOL
E Q U I P M E N T Vices 8 2 7
The Largest Independent O&P Distributor
EQ
UIP
ME
NT
VICES
e. Pipe Holding Fixture
Adjustable. Sold each. From Fillauer.
Description Item No.ò Vice Mount Model (pictured) 220129
Bench Mount Model 220131
f. Prosthetic Bench Vice
Opens to 16” with an 8” depth. Swivel jaw. Replacement pads available. Sold each. From Fillauer.
Item No. ð 220178
g. ProLine Tools® Prosthetic Vice
Concentric clamp adapts to any diameter pipe. Zinc plated, yellow chromate low carbon steel. Sold each.
From Wagman Manufacturing.
Description Item No.ò Vice Mount Model PL-T04
Bench Mount Model PL-T04B
Cascade Orthopedic Supply, Inc. | 800-888-0865 | www.cascade-usa.com
E Q U I P M E N T8 2 8 Router and Sanding
EQ
UIP
ME
NT
ROUTER and SANDING
a. ProLine Tools® Portable Router
Easily repositionable at only 28 lb, the PL-500 bridges the gap between stationary and portable router equip-
ment. The 1/3 Hp motor with lifetime-lubricated ball bearings is completely enclosed to keep mechanical noise
to a minimum. The adjustable head can be positioned at any angle or height for a variety of tasks. Welded
base is pre-drilled for easy table mounting. 7 ft power cord. 110/115 V. Sold each.
Item No. ð PL-500
PL-100-CBD ProLine Router Circuit Board Drive
b. Router Foot Switch
Sold each. From Grainger.
Item No. ð SR-200E-FS
c. Dust Collector Attachment
Infinitely adjustable. Steel construction. 4” exhaust for connection to vacuum system. Appropriate for floor
carvers. Sold each. By Trautman from Fillauer.
Item No. ð 2100L
d. Angled Accessory Holder Attachment
Keeps your accessories organized and visible. Appropriate for floor carvers. Sold each. By Trautman from
Fillauer.
Item No. ð 2100M
E Q U I P M E N T Router and Sanding 8 2 9
The Largest Independent O&P Distributor
EQ
UIP
ME
NT
e. ProLine Tools® Router Adapter
Attaches to standard 1/2-13 thread and provides a 5/8-11 thread at opposite end. Overall length 2-7/8”. Alu-
minum construction. Sold each. From Wagman Manufacturing.
Item No. ð PL-1109
f. Pneumatic Sanding Drum
Standard 1/2-13 thread. 3-1/2” diameter. 5-1/4” length. Sold each. From Qualis International.
Item No. ð 594000
594002-NS Replacement Bladder for 594000 New Style
594002-OS Replacement Bladder for 594000 Old Style
g. Sanding Sleeve for Pneumatic Sanding Drum
Sleeves fit Pneumatic Sanding Drum above. Sold each. From Qualis International.
Description 120 Grit 80 Grit 60 Grit 24 Grit
Item No. ð 5940120 594080 594060 594024
h. Garalun Drum
6-1/2” face. 6” LD x 5-5/8” SD. Sold each. From Saint Gobain Abrasives.
Description 150 Grit 24 Grit
Item No. ð 95761 95813
i. Tapered Sand Drum Sleeve
Fits the 5001 Trautman Arbor. Sold each. By Trautman from Fillauer.
Description 240 Grit 180 Grit 120 Grit 50 Grit 24 Grit
Item No. ð S240 S180 S120 S50 S24
Cascade Orthopedic Supply, Inc. | 800-888-0865 | www.cascade-usa.com
E Q U I P M E N T8 3 0 Router and Sanding
EQ
UIP
ME
NT
ROUTER and SANDING — Continued
a. Sand-Rite Jacket
Sold each. From Sand-Rite.
Size 2” x 8” 3” x 7” 4” x 9” 6” x 7” 6” x 9” 8” x 9”
Item No. ð SRJ-28 SRJ-37 SRJ-49 SRJ-67 SRJ-69 SRJ-89
b. Sutton Abrasive
Sold each. From DJ Distributors.
Description 80 Grit 60 Grit 40 Grit 24 Grit
Item No. ð B45980 B45960 B45940 B45924
c. Sanding Belt
4” x 59”. Sold case/10. From Shoe Systems Plus.
Description 40 Grit 24 Grit
Item No. ð BZ45940 BZ45924
d. Rubber Sand Core and Sleeves
Standard 1/2-13 thread. Sold each. See next page for sanding cones. By Trautman from Fillauer.
Size X-Small Small Large
Top Diameter .75” 1.062” 1.437”
Bottom Diameter 1.25” 1.937” 1.937”
Length 4.125” 4.125” 4.125”
Rubber Sand Core RAXS RAS RAL
Sanding Sleeve X-Small Small Large
180 Grit RAXS-180 N/A N/A
100 Grit RAXS-100 N/A N/A
80 Grit N/A RAS-080 RAL-080
50 Grit RAXS-050 N/A N/A
36 Grit N/A RAS-036 RAL-036
Finishing Cone X-Small Small Large
Fine (Blue) RAXS-F RAS-F RAL-F
Medium (Red) RAXS-M RAS-M RAL-M
Coarse (Brown) RAXS-C RAS-C RAL-C
E Q U I P M E N T Router and Sanding 8 3 1
The Largest Independent O&P Distributor
EQ
UIP
ME
NT
e. Trautman Sand Cone
For rubber sand cores. Sold each. By Trautman from Fillauer.
Description 120 Grit 80 Grit 24 Grit
For Small Size Core (2100D) D120 D80 D24
For Medium Size Core (2100C) C120 C80 C24
f. Felt Arbor
May be shaped to any contour. Used for polishing edges of plastic laminate. Sold each. By Trautman from
Fillauer.
Dimensions 3” x 4” 2-1/2” x 4” 2” x 3” 2-1/2” x 4” 2” x 3”
Thread 1/2” 1/2” 1/2” 5/8” 5/8”
Item No. ð 225062 225064 225066 225086 225094
g. Tapered Felt Arbor/Core
For use with Fillauer sand cones. Used for polishing plastic edges. Sold each. By Trautman from Fillauer.
Dimensions 2”x 4” 1-1/2” x 4” 1” x 4” 2” x 4” 1-1/2” x 4”
Thread 1/2” 1/2” 1/2” 5/8” 5/8”
Item No. ð 225068 225070 225072 225128 225177
h. Sand Cones for Tapered Felt Arbor/Core
For use with Tapered Felt Arbor/Core above. Sold dozen. By Trautman from Fillauer.
Description 80 Grit 120 Grit 36 Grit 100 Grit 120 Grit 36 Grit 80 Grit
Dimensions 1” x 4” 1” x 4” 1-1/2” x 4” 1-1/2” x 4” 1-1/2” x 4” 2” x 4” 2” x 4”
Item No. ð 225173 225175 225151 225169 225171 225136 225141
i. Diamond Sanding Cone
Fine, coarse and dual in 30mm, 35mm and 50mm diameter at threaded end. Standard 1/2-13 thread. Sold
each. From Diamond Tool Supply.
Grit Fine Course Dual
30mm Diameter (X-Small) CONE-30-F CONE-30-C CONE-30-D
35mm Diameter (Small) CONE-35-F CONE-35-C CONE-35-D
50mm Diameter (Large) CONE-50-F CONE-50-C CONE-50-D
Cascade Orthopedic Supply, Inc. | 800-888-0865 | www.cascade-usa.com
E Q U I P M E N T8 3 2 Router and Sanding
EQ
UIP
ME
NT
ROUTER and SANDING — Continued
a. Rubber Arbor 749
Slip-on type fits router shaft. Includes one 80 grit sanding sleeve. 7-3/4” length. 3” diameter. Sold each. From
Friddle’s Orthopedic.
Item No. ð RA-749
Sanding Sleeve 100 Grit 80 Grit 60 Grit 40 Grit 24 Grit
Item No. ð RA-749-100 RA-749-080 RA-749-060 RA-749-040 RA-749-024
b. Garalun Cone
4” face. Sold each. From Saint Gobain Abrasives.
Description 180 Grit 100 Grit 80 Grit 36 Grit
1-11/32” LD x 1-1/16” SD N/A 99864 99863 99862
1-15/16” LD x 1-3/8” SD 98098 N/A 95742 99865
c. Sanding Sleeve
Sold each. From Sand-Rite.
Dimensions 150 Grit 120 Grit 100 Grit 80 Grit
3” x 7” SRSS-3X7-150 SRSS-3X7-120 SRSS-3X7-100 SRSS-3X7-080
3” x 9” SRSS-3X9-150 SRSS-3X9-120 SRSS-3X9-100 SRSS-3X9-080
4” x 9” SRSS-4X9-150 SRSS-4X9-120 SRSS-4X9-100 SRSS-4X9-080
6” x 7” SRSS-6X7-150 SRSS-6X7-120 SRSS-6X7-100 SRSS-6X7-080
6” x 9” SRSS-6X9-150 SRSS-6X9-120 SRSS-6X9-100 SRSS-6X9-080
8” x 9” SRSS-8X9-150 SRSS-8X9-120 SRSS-8X9-100 SRSS-8X9-080
Dimensions 60 Grit 40 Grit 36 Grit 24 Grit
3” x 7” SRSS-3X7-060 SRSS-3X7-040 SRSS-3X7-036 SRSS-3X7-024
3” x 9” SRSS-3X9-060 SRSS-3X9-040 SRSS-3X9-036 SRSS-3X9-024
4” x 9” SRSS-4X9-060 SRSS-4X9-040 SRSS-4X9-036 SRSS-4X9-024
6” x 7” SRSS-6X7-060 SRSS-6X7-040 SRSS-6X7-036 SRSS-6X7-024
6” x 9” SRSS-6X9-060 SRSS-6X9-040 SRSS-6X9-036 SRSS-6X9-024
8” x 9” SRSS-8X9-060 SRSS-8X9-040 SRSS-8X9-036 SRSS-8X9-024
d. 3M™ Sanding Screen
Strong synthetic fibers provide durable, uniform, open screen construction for low loading. Silicon carbide
mineral for effective abrasive performance. Sheet size 9” x 11”. Sold sheet. From 3M Company.
Description 220 Grit 180 Grit 150 Grit 120 Grit 100 Grit 80 Grit
Item No. ð 3MSS-220 3MSS-180 3MSS-150 3MSS-120 3MSS-100 3MSS-080
E Q U I P M E N T Router and Sanding 8 3 3
The Largest Independent O&P Distributor
EQ
UIP
ME
NT
e. Tycro Polishing Arbor
Tycro polishing arbor is double ended with 5/8” thread one end, 1/2” thread opposite end. 3” diameter. 3-1/2”
length. Sold each. By Trautman from Fillauer.
Item No. ð 225110
f. Tycro Cone
Sold each. From Friddle’s Orthopedic.
Description 1” X 4” 2” X 4”
Item No. ð TC1X4 TC2X4
g. Tycro Wheel with Glass
2” x 2-1/2”. Use with Tycro Converter Seat below. Sold each. From UCO International.
Item No. ð 52/6658-606
h. Mini Sander Attachment
Standard 1/2-13 thread. Includes 6 sanding sleeves. Replacement sanding sleeves available. Sold each. From
B&G Rehab.
Description Item No.ò
Mini Sander Attachment, Complete 1111-BR
1111-F Sanding Sleeve, Fine, 6/Pkg
1111-C Sanding Sleeve, Coarse, 6/Pkg
i. Mini Tycro Buffer Attachment
Standard 1/2-13 thread. Replacement buffer available. Sold each. From B&G Rehab.
Description Item No.ò
Mini Tycro Buffer Attachment 1108
1108-RTB Replacement Tycro Buffer Head
Cascade Orthopedic Supply, Inc. | 800-888-0865 | www.cascade-usa.com
E Q U I P M E N T8 3 4 Router and Sanding
EQ
UIP
ME
NT
ROUTER and SANDING — Continued
a. Mini Rasp Attachment
Standard 1/2-13 thread. Sold each. From B&G Rehab.
Item No. ð 1110-BI
b. Mini Arbor Adapter
Standard 1/2-13 thread. Sold each. From B&G Rehab.
Item No. ð 1108-A
c. ProLine Tools® Tycro Cone Adapter
Standard 1/2-13 thread. Sold each. From Wagman Manufacturing.
Item No. ð PL-1138
d. Tycro Converter Seat
Converts Tycro thread to standard 1/2-13. Sold each. From UCO International.
Item No. ð 52/6662-003
e. Diamond Rasp
Constructed with a surface layer of diamonds instead of teeth, diamond rasps are available in fine and coarse
grits. Standard 1/2-13 thread fits most router equipment. Sold each. From Diamond Tool Supply.
Grit Fine Coarse
Item No. ð RASP-PA-FINE RASP-PA-COARSE
E Q U I P M E N T Router and Sanding 8 3 5
The Largest Independent O&P Distributor
EQ
UIP
ME
NT
f. Grinding Rasp
Sharp, high quality steel. Standard 1/2” thread. Does not require adapter. Sold each. By Trautman from Fillauer.
Item No. ð 2100E
g. Grinding Rasp
Sharp, high quality steel. 5/8” thread requires router adapter. Sold each. By Trautman from Fillauer.
Description Dimensions Item No.ò
For use on transtibial sockets 1-1/2” x 2-1/4” 225052
For small diameter and channel work 1-3/8” x 3-3/8” 225045
With extra fine teeth for plastic 1-3/8” x 2-1/8” 225060
For general transfemoral socket work 1-3/4” x 3-1/8” 225037*
*Not pictured.
h. Coneiak Polishing Arbor
Sold each or in a set with one each with handsome storage case. 1/2–13 thread. By Trautman from Fillauer.
Style Ball Nose Tapered Grooved Slim 4 Set w/Case
Color Orange Red Gray Blue Mixed
Item No. ð 225400 225410 225420 225440 225490
i. Polishing Cone
For rubber sand cores. Sold each. By Trautman from Fillauer.
Grit Fine Medium Coarse
Color Blue Maroon Brown
For Mini Size Core (2100P) 225117 225118 225119
For Small Size Core (2100D) 225111 225112 225113
For Medium Size Core (2100C) 225114 225115 225116
j. FOA Polishing Cone
Fine grit, blue color. Sold each. From Friddle’s Orthopedic.
Size 1” x 4” 1-1/2” x 4” 2” x 4”
Item No. ð 25000 25001 25002
Cascade Orthopedic Supply, Inc. | 800-888-0865 | www.cascade-usa.com
E Q U I P M E N T8 3 6 Router and Sanding
EQ
UIP
ME
NT
ROUTER and SANDING — Continued
a. Soft Foam Shaper
Ideal for contouring both inner and outer areas of the foam cover. Fine steel bristles barely protrude through
the surface of the plastic allowing foam to be shaped smoothly and evenly. Measures 2-3/4” x 5”. Sold each.
From Hosmer.
Item No. ð 51391
b. ProLine Tools® Foam Finisher
Attaches to standard 1/2-13 thread for a smooth finish without grabbing. Sold each. From Wagman Manu-
facturing.
Item No. ð PL-100
E Q U I P M E N T Vacuum Equipment 8 3 7
The Largest Independent O&P Distributor
EQ
UIP
ME
NT
VACUUM EQUIPMENT
c. Portable Vacuum
Features a permanently lubricated 1/4 Hp motor with enough power to operate two vacuum laminating jigs
simultaneously. 4 cubic feet per minute capacity. Adjustable vacuum from 3” to 27” of mercury. Standard
110/115 volt 50/60 Hz single phase. Includes gauge, regulator, filter, hoses and overflow traps. From Hosmer.
Item No. ð 51277
56161 Cord 54091 Intake Filter Jar Only 51273 Tubing
51276 Klemm Filter 56182 Intake Filter Only 54662 Siphon Oiler
54663 Tee 55124 Bushing 56189 Siphon Oiler Jar Only
53963 Bleeder Valve 55125 Pipe Tee 51272 Close Nipple
55603 Close Nipple 51268 Street Elbow 56159 Front Support
54093 Intake Filter Assembly 51271 Hose Connector 54724 Oil
d. Vacuum Laminating Jig
May be positioned to hold cast at any angle or degree of rotation. Large PVA tie-off ring and hose attach-
ment for inside and outside vacuum lines make laminating easier and faster. From Hosmer.
Item No. ð 51454
51459 Vacuum Device Assy 51455 Laminating Assembly 51456 Pipe Lock
51462 Clamp Assembly 51271 Hose Connector 51273 1/4” Hose, 6’ Length
51463 Post Base Assembly 51458 Stopper 55706 Lamination Mandrel
52062 Clamp Assembly 51457 Plug 51275 3/16” Tie-Off Hose
e. Supreme Vacuum Press
Features a unique perimeter air flow that allows a more even distribution of pressure, locking handle, quick-
release bladder frame and built-in pressure relief valve to protect pump. Oversized (10” x 17”) or Supersized
(17” x 18”) work area with 3” pan depth. Sold each. From Shoe Systems Plus.
Style Single Dual
Inside Dimensions 10” W x 17” L 17” W x 18” W
Outside Dimensions 16.5” W x 25” L 23.5” W x 26” L
Weight 32 lb 41 lb
Item No. ð SVP1017 SVP1718
Replacement Bladder SVP-RB1017 SVP-RB1718
Cascade Orthopedic Supply, Inc. | 800-888-0865 | www.cascade-usa.com
E Q U I P M E N T8 3 8 Ovens
EQ
UIP
ME
NT
OVENS
a. PDQ BT-1
Intended for flat plastics only, the BT-1 incorporates all the infrared efficiency of the full size PDQ ovens in a
smaller, more versatile size. Aluminum and stainless steel construction. Four 650 watt infrared emitters. Other
features include interior light, double pane viewing window, programmable digital temperature control and
tray with a fitted Teflon® cover. 1 year warranty. From OTS Corporation.
Specifications
Footprint: 43”D x 42”W Height: 20” (44” with legs) Interior Dimensions: 30”D, 38”W, 6”H Uncrated Weight: 150 lb Electrical: 220V/20A/Single Phase Heat Source: (4) 650 watt emitters
Item No. ð O BT1
OR MIS LATCH Replacement Latch
b. PDQ PO-2
PDQ’s top-of-the-line infrared oven features banks of lights above and below for the quickest and most even
heating of either sheet plastic or thick bubble forming plastic. Caster-mounted tray can be rolled to your
vacuum area. Aluminum and stainless steel construction. Four 1,000 watt infrared emitters on top and bottom.
Other features include interior light, two double pane viewing window, programmable digital temperature
control and a fitted Teflon® sheet for tray. 1 year warranty. From OTS Corporation.
Specifications
Footprint: 60”D x 40”W Height: 53” Interior Dimensions: 36”D, 50”W, 20”H Electrical: 220V/50A/Single Phase Heat Source: 16-650 watt quartz infrared tubes Interior Lighting: (8) 1,000 watt bulbs
Item No. ð O PO2
c. PDQ BT-4
The BT-4 is capable of bubble forming and heating sheet plastic while taking up a minimal amount of floor
space. It is big enough to heat most KAFO sheet plastics and has enough drop for even the biggest check
socket. The BT-4 has the same speed and reliability as other PDQ Infrared Ovens. The eight 1000 watt emit-
ters—four on top and four on bottom—along with the dual electric fans allow bubble forming plastics to be
heated evenly and efficiently. It is truly the best of both worlds with its small size and large capacity. Other
features include programmable digital temperature controller, 4 interior lights and large viewing window,
access point for vacuum line, sheet-plastic tray with fitted Teflon® cover and 18” clearance for bubble form-
ing. Aluminum and stainless steel construction. 1 year warranty. From OTS Corporation..
Specifications
Footprint: 49”D x 32”W Height: 61” Interior Dimensions: 40”D, 27”W, 24”H Electrical: 220V/50A/Single Phase Interior Lighting: (8) 1,000 watt bulbs
Item No. ð O BT4
E Q U I P M E N T Ovens 8 3 9
The Largest Independent O&P Distributor
EQ
UIP
ME
NT
d. PDQ Rollabout
An excellent solution for heating large sheets of plastic for hip spicas, AFOs or check sockets. Four sizes, each
features a hydraulic assisted height adjustable tray for easy operation. The tray includes a fitted Teflon® cover,
is mounted on casters, and can be rolled to your vacuum area. Aluminum and stainless steel construction.
650 watt infrared emitters (1,000 watt on 8E). Features include interior light, double pane viewing window,
programmable digital temperature control. 1 year warranty. From OTS Corporation.
Exterior Dimensions (48”H) 49”W x 35”D 47”W x 55”D 59”W x 55”D 70”W x 52”D
Interior Dimensions (18”H) 38”W x 31”D 36”W x 51”D 48”W x 51”D 60”W x 48”D
Item No. ð O 5A O 6B O 7C O 8E
OR TEFLON 5A Teflon Sheeting for 5A Rollabout
OR TEFLON 6B Teflon Sheeting for 6B Rollabout
OR TEFLON 7C Teflon Sheeting for 7C Rollabout
OR TEFLON 8E Teflon Sheeting for 8E Rollabout
e. PDQ Rollabout 8D
Designed for the high-volume facility, the convertible double tray Rollabout 8D model features two separate
height adjustable trays that can be connected together to create one area measuring 80” wide and 50” deep.
The bottom of the oven consists of two trays with fitted Teflon® covers. These trays can be connected together
and covered with one large tray (included). Aluminum and stainless steel construction. Caster rollers. 1 year
warranty. From OTS Corporation.
Specifications
Footprint: 54”D x 92”W Height: 48” with legs Interior Dimensions: 50”D, 80”W, 18”H Electrical: 220V/20A/Single Phase Heat Source: (4) 1,000 watt emitters
Item No. ð O 8D-2
Cascade Orthopedic Supply, Inc. | 800-888-0865 | www.cascade-usa.com
8 4 0
This page intentionally left blank.
8 4 1
The Largest Independent O&P Distributor
This page intentionally left blank.
Cascade Orthopedic Supply, Inc. | 800-888-0865 | www.cascade-usa.com
8 4 2