35

sales@demandproducts.com • demandproducts.com • 1-800.325.7540

E IFS | STUCCO | FOAMTOOLS AND EQUIPMENT

PBH™ WASHERThe Builder’s Choice

• 2” Diameter • Manufacturer Approved • Cone Design Prevents Popups • White - No Color Bleed Thru • Finger Closures• Eliminates Thermal Shorts• Large Keyholes for Strong

Mechanical Bond

Item # Description Qty Per BoxPBH PBH Washer 1000 PBH500 PBH Washer 500

Reinforced Center Hub Helps Prevent Overdrive

COOL CUT™

Air Cooled Hot Knife• Air Cooled Housing Allows for Continuous Cutting Usage

• 190 Watts • Includes 4” & 6” Blades and Case • Electronic Circuit Board Powered • Variable Heat Control • Lightweight • Stamped Blades • Spring Loaded Safety Trigger

Item # DescriptionHKTCC Cool Cut Knife & Blade Adapter w/ 4” & 6” Blades 200CR 2” Blade 400CR 4” Blade 600CR 6” Blade HKTCRP01 Blade Adapter

ADJUSTABLE HEAT DIAL

HKTCC

Visit demandproducts.comfor More Washer Options

demandproducts.com • 1-800.325.7540

HOT KNIVES

HKTCR-M

Hot Knife™ CR Master Kit

Straight Blade Cutter & Groove Cutter Combo

HEATS UP TO 10” WIRE

• 190 Watts• Electronic Circuit Board Powered • Variable Power Control• Lightweight• Stamped Blades• Spring Loaded Safety Trigger

INCLUDES:Hot Knife™ CR CutRite™6” Groove Adapter with Guide1” Groove Adapter with GuideAngle Straight Blade Adapter4”, 6” & 8” Hot Knife Blades2’ NWFW Flat WireCurved Pipe Cutting BladeOriginal Hot Knife™ Blade Adapter

HKTCR-M

200CR400CR600CR800CR

Item # Hot Knife CR CutRite™ Master Kit2” Blade4” Blade6” Blade8” Blade

Description

Save Over $100 when Purchasing

The Master Kit

CARVE360™ Pro EIFS Kit Kit with 6” Groove AdapterEVERYTHING YOU NEED FOR EIFS

• CARVE360™ Hot Knife• 6” Groove Adapter with Guide • 4” & 6” Hot Knife Blades• 3’ NWFW Flat Wire• Crimping Pliers• 6” EIFS DuraRasp™• Heavy Duty Canvas Bag • Carry Case

KITPRO360Item #

CARVE360 Foam Cutter KitDescription

KITPRO360Visit demandproducts.comfor More Kit Options HKT360

ORIGINAL DURARASP™

DR814 DR614 DR414 DR214

Item # DescriptionDR214 2” x 14” DR414 4” x 14” DR614 6” x 14”DR814 8” x 14”

TH

E ORIGINAL

SINCE 1998

TM

U.S.A.

MADE IN™

ORIGINAL DURARASP™

12-Grit Tungsten Carbide Rasp• Non-Gouging Rounded Corners• Custom Crafted and Serial Numbered• Lasts 100 Times Longer than Rasp Paper• Ergonomic Handle

Heavy Brazed#12 Tungsten Grit

demandproducts.com • 1-800.325.7540

GROOVE JET™

GROOVE JET™ 400 HOT KNIFEAesthetic Groove Cutter

• Weighs Only 4 Lbs • Handles up to 5” x 3” NWFW Blades • Heats Up Fast • Cuts Clean with One Pass • Blade Positioned Up Front• Available in 220 Volts

Item # DescriptionKITGJ400 Groove Jet™ 400 NWFW Flat Wire, per foot

CUTS ALL THE WAY TO INSIDE CORNERS

Visit our Web Site for Available Kits

KITGJ400with Guide

TC814 TC614TC414

For Rasping, Cutting & Shaving EPS Foam

Item # DescriptionTC414 The Tiger Claw™ 4” x 14” TC614 The Tiger Claw™ 6” x 14”TC814 The Tiger Claw™ 8” x 14”

All the Features of the DuraRasp™, Plus...

Rasping Cut-Off Saw Shaves High Spots

• 51/2” x 11”• ABS Plate

F400R NKI Float

F400RItem # Description

NIKI Float

• PVC Plate• 51/2” x 11”

F650 NKI Float

F650Item # Description

NIKI PVC SOFT GRIP

TROWELS & FLOATS

PERMASHAPE GOLDEN STAINLESS TROWELby Marshalltown™

• Dura-Soft ™ Handle • Golden Stainless Steel

Item # DescriptionT512DS 5” X 12” T513DS 5” X 13” T514DS 5” X 14” T516DS 5” X 16”

Visit demandproducts.com for More Trowels & Floats

STUCCO SPONGE FLOAT3/4” and 1” Thickness• Ideal for Bringing Aggregate to the Surface • The Most Popular for All Stucco Applications • 12” x 5” with Wood Handle

Item # DescriptionF125 3/4” Fine Pad F130 1” Fine Pad F135 1” Course Pad

Floats

Item # DescriptionGPAD6 3/4” Fine Pad, 6 Pack GPAD61 1” Fine Pad, 6 Pack GPAD6C 1” Course Pad 6 Pack

Replacement Pads

Item # DescriptionF150 White Sponge Float WPAD6 Replacement Pads 6 Pack

F150 WHITE SPONGE FLOAT1” Soft Texture• Retains Water and Provides a Smoother Finish • 5” x 12” with Wood Handle

CORK HANDLE GOLDENSTAINLESS STEEL TROWELSKraft Elite Series Five Star Trowels• NEW Precision Ground Edge - Ready for Immediate Use• Greater Flexibility & Durability to Reduce Fatigue• Power Pin Rivets for Exceptional Strength• Unique, Lightweight No Turn Handle• Trowel Holder for Edge Protection• Made in USA

Item # DescriptionT512C 5” x 12” Cork Handle Trowel T513C 5” x 13” Cork Handle Trowel T514C 5” x 14” Cork Handle Trowel T516C 5” x 16” Cork Handle Trowel

demandproducts.com • 1-800.325.7540

RETAIL TOOL HANGERS

PRIVATE LABEL PROGRAMSpecial Chemical Resistant Labels Outlast Printed and Stamped Style Labels.Available in 24 Ink Colors

F600 ABS FLOAT• Solid-Grip Comfort Textured Handle • 5” x 12” • ABS Plate

Item # DescriptionF600 ABS Float

1” x 3” Custom Label Minimum Order of 120 Floats Mix & Match Any Style

YOUR LABEL HERE

TOOL HANGERSFits Edgers and Trowels• Organizes Tool Display • Fits Single or Double Peg Hangers • Nylon Construction

Item # Description Stainless Outside Corner Edgers with Tool HangerT609H 1/2” Stainless OUTSIDE Corner Edge T610H 3/4” Stainless OUTSIDE Corner Edge T611H 1” Stainless OUTSIDE Corner Edge T612H 1 1/2” Stainless OUTSIDE Corner Edge T613H 2” Stainless OUTSIDE Corner Edge KITOCEH OUTSIDE Corner Edger Kit (All 5) Stainless Inside Corner Edgers with Tool Hanger T599H 1/2” Stainless INSIDE Corner Edge T600H 3/4” Stainless INSIDE Corner Edge T601H 1” Stainless INSIDE Corner Edge T602H 1 1/2” Stainless INSIDE Corner Edge T603H 2” Stainless INSIDE Corner Edge KITICEH INSIDE Corner Edger Kit (All 5) Stainless Margin Trowels with Tool Hanger TS1H Stainless Margin Trowel, 1 1/2” x 3 3/8” TS2H Stainless Margin Trowel, 2” x 4” TS3H Stainless Margin Trowel, 1 1/2” x 7” KITTSH All 3 Sizes in Kit Stainless Detail Trowels with Tool Hanger TPD1H Stainless Pointed Detail Trowel TRD2H Stainless Rounded Detail Trowel Wood Handle Margin Trowels with Tool Hanger T515H Margin Trowel, 1 1/2” x 5” T520H Margin Trowel, 2” x 5” T530H Margin Trowel, 2” x 6” T535H Margin Trowel, 2” x 8” KITMTH All 4 Sizes in Kit

T612

TS1

T602

Works great with all Demand Products’ Inside & Outside Edgers as well as Margin and Detail Trowels.

demandproducts.com • 1-800.325.7540

Beveled Cuts

FC13

Built In Transformer

Power Trigger

Foot Pedal

FIELD CUT™

FIELD CUT™

Portable Hot Wire Cutting Station• 13” Cutting Height, 54” Width • Angle, Bevel and Compound Cuts• 110 Volt • Includes Variable Power Supply • Durable Carry Case for Field Use • Uses NW100 or NW500 Ni-Chrome Wire

Item # DescriptionFC13 Field Cut™ with Power Supply

Multiple Adjustment Points Allow for a Variety of

Angles and Cuts

Angled Block Cuts

PRO-LOK™

PRO-LOK™

Foam to Foam Adhesive• High Bonding Strength• Low Expansion• Bonds to Most Building Materials• Seals Gaps to 3”• High Insulating Value • Easy To Use

Item # DescriptionPLOK PRO-LOK™ Adhesive, 25.57 oz KITPLOK Case of 12 with FGun2

PRO-KLEAN™

Adhesive Gun Cleaner• Cleans Applicator Gun• Removes Uncured PU Foam • Pleasant Fragrance • Acetone Based Cleaner • 2 Year Shelf Life

Item # DescriptionPKLEAN PRO-KLEAN™ Cleaner, 13.4 oz KITPKLEAN Case of 12Visit demandproducts.com for Pro-Lok™

Kits which also include Pro-Klean™ and an F-Gun2 applicator gun.

EXCLUSIVELYFromDemand Products TM

FreestandingConfiguration

Easy to Configure for Table Top Use or Vertical Free Standing Use

demandproducts.com • 1-800.325.7540

STYROSMITH™

STYROSMITH™

2-in-1 Hot Wire Foam Cutter and Ornamental Shaper• Ornamental Shapes• Vertical & Horizontal Straight Cuts• Channels, Angles, Tapers, Compound Miters, • Straight Cuts, Columns, Decorative Moldings, etc.• 110 Volt• 24” Block Table Capacity• Auxiliary Table• Weighs Just 225 Lbs• Lease to Buy Available

Item # DescriptionKITSS StyroSmith™ Only MAGNUM Magnum Power Controller KITSSM StyroSmith™ with Magnum NW100 Ni-Chrome Wire, 100 Feet NW500 Ni-Chrome Wire, 500 Feet

StyroCut StyroSmith

Remove Top Brace

Add Auxiliary Table

Add Harp at Top Uprights Facing the Back of the StyroCut 15

STYROCUT™

Our Best Machine!• Use In-Plant or On Job Site• Foot Pedal Control• Designed by Engineers To Cut Straight, • Channel, Angles and Tapers• Portable — Weighs Just 117 Lbs• Capable of Vertical and Horizontal Cuts• Table Tilts and Locks 0° - 45°• Cuts 15” Deep x 4’ Wide• Cutting Table is 60” Wide x 27” Deep

Item # DescriptionKITSC StyroCut™ Only MAGNUM Magnum Power Controller KITSCM StyroCut™ with Magnum NW100 Ni-Chrome Wire, 100 Feet NW500 Ni-Chrome Wire, 500 Feet

KITSCM

KITSSM

demandproducts.com • 1-800.325.7540

Columns • Pipe Insulation • Sign Letters • Graphics Store Props & Displays • Logos • Amusement Park Props

Architectural Scale Models • Easy Coat Coatings

Item # DescriptionMX401 Mixx-All Mixer

MIXX-ALL 401Variable Speed Super Duty EIFS / Stucco Mixer• 3/4 Horse Power Electric Motor• Variable Speed, 0-660 RPM• 110 VAC (90 VDC)• 3/4” Chuck• Stainless Steel Mixing Paddle• Counter Balanced for Smooth Operation

MIXER

MX401

• Cut Tapered Fluted Columns • Cut Up to 8’ Wide by 4’ High • Includes Lathe and Turntable • Heavy Duty Extruded Aluminum • Automatic Wire Tensioner • Operates on 110 Volts

Call for Turnkey Pricing*

848-I INDEPENDENT AXIS CNC FOAM CUTTERSingle Wire 8’ with Lathe & Turntable

Stand Not Included

TOP SELLING MODEL

TK848I

• CNC Hotwire Cutter Series • Movement Speed: 400”/Minute • Independent Axis Available • MultiWire System Available • Up To Three Turn Tables • Up To Three Lathes • Remote Control Operation

• Up To 6’ Cutting Height • Bar Code Scanning • Free Lifetime Updates On MegaPlot Software

Call for Turnkey Pricing*

Stand Not Included

MACHINES

ECOATER

• Footprint: 57” x 62” of Floor Space• HD Stainless Steel and Aluminum Construction• Profiles from 2” to 36” Wide and 18” High• Sprocket Feed Depth Controls• 110 or 220 Volts• One Year Warranty

EASY COAT SILVERAutomatic Foam Coater With or Without Fiber Mesh

Call for Turnkey Pricing*

TKOC848P

demandproducts.com • 1-800.325.7540