DS274

FASTER TO THE FINISH Get more done with Dryvit’s seasonal and time-saving products.

Westgate BuildingNorwich, CT

DON’T LET THE WEATHER SLOW YOU DOWN.

Extend your day… Extend your season. Don’t let dormant grass and chilly temperatures reduce your available working hours or put a damper on your construction season. With Dryvit’s seasonal products, you’ll be “Faster to the Finish” every time, which is good news for your bottom line.

RAPIDRY DM TM

Fast-setting adhesive and base coat keep business brisk when the weather is cool. Rapidry DM 35-50 Apply when job site and wall temperatures are 35 °F (2 °C) to 50 °F (10 °C).

Rapidry DM 50-75 Apply when job site and wall temperatures are 50 °F (10 °C) to 75 °F (24 °C).

To learn more, check out our product data sheets online: Rapidry DM™ 35-50 (DS456) Rapidry DM™ 50-75 (DS457) www.dryvit.com/ftf

Eagle River High School Anchorage, AK

A customer’s RapidPatch™ experience:“ RapidPatch allowed us to move the platform

staging the same day we finished the work above. We saved two days of scaffold rental.”

– Al Meyer, Valley Interior Systems | Cincinnati, OH

A customer’s Rapidry DM™ 35-50 experience:“ We used Rapidry 35-50 on a project in December

and January when we were in adverse conditions with both cold and moisture. With Rapidry DM 35-50, we had at least 20% time savings over using other products (Primus® & Genesis®). And we saved tremendously on labor (3 days totaling $7,500). Rapidry is tough to beat because you can stick the foam and do a base coat all in the same day. Come wintertime, we will definitely use Rapidry 35-50 again.”

– Wyatt Spriggs, Ryan Interiors Inc. | Stafford, VA

A customer’s Rapidry DM™ 50-75 experience:“ Rapidry DM 50-75 allowed us to stick the foam, rasp and mesh all in the same day. This was needed

because we were on swings 130-150 feet in the air that needed to be moved and set up for every 50 feet section of the wall. With 900 linear feet of wall, I bet we cut 30 swing days off the project by using Rapidry, which resulted in at least $5,000 in savings in rental costs and labor.”

– Don Ulmer, Ulmer Construction Incorporated | Jupiter, FL

RAPIDPATCH™ Fast-setting, non-sagging, patching material Patch it fast, patch it well… even in chilly temperatures!RapidPatch is a one-component, fast-setting, patching material for Dryvit systems.

Features: RapidPatch is an exceptional patching material specially engineered to patch holes in an existing EIF system up to a maximum 3 in x 3 in x 1 in (76 mm x 76 mm x 25 mm).

Benefits: A fast application, fast drying time. After mixing, the working time of RapidPatch is 20-30 minutes. The finish coat can often be applied in 60 minutes at 70 °F (21 °C), 55% relative humidity. Lower temperatures and higher humidity will extend the curing time.

To learn more, check out our product data sheet online: RapidPatch™ (DS458) www.dryvit.com/ftf

Private Residence | Hendersonville, TN

A customer’s AquaFlash® Corners experience:“ Easy to use, works well. Definitely a faster process than cutting the pieces to fit the corners. Saves us time and money.” – Vance Austin, Big Time Plastering | Grovetown, GA

A customer’s Backstop® NT Spray experience:“ Spraying is the fastest method to apply a liquid air barrier and having Dryvit’s Backstop NT supplied in drums allows me to get the job completed faster without having to constantly fill my spray unit from a 5-gallon pail.” – Marcos Galindo, Dutch’s Masonry | Lakewood, CO

Available in new and more convenient sizes to help you get

FASTER TO THE FINISH

BACKSTOP® NT SPRAY AVAILABLE IN DRUMSPerfect for larger projects.Features: 50 gallons of Dryvit’s liquid-applied air- and water-resistive barrier.Benefits: Spraying saves time and money with fewer stops for refills and less waste.

To learn more, check out our product data sheet online: Backstop® NT Spray in Drums (DS455) www.dryvit.com/ds455

AQUAFLASH® CORNERSFeatures: Easy to install, pre-cut mesh flashing for water-resistant barriers at openings.Benefits: Fast installation and less waste saves time and money.

To learn more, check out our product data sheet online: AquaFlash® Corners (DS494) www.dryvit.com/ds494 Dryvit Systems, Inc.

One Energy WayWest Warwick, RI 02893401-822-4100dryvit.com

Information contained in this brochure conforms to the standard detail recommendations and specifications for the installation of Dryvit Systems, Inc. products as of the date of publication of this document and is presented in good faith. Dryvit Systems, Inc. assumes no liability, expressed or implied, as to the architecture, engineering or workmanship of any product. To ensure that you are using the latest, most complete information, contact Dryvit Systems, Inc.

© Dryvit Systems, Inc. 2017Printed in U.S.A. R1: 8-11-17 8-17 3.5M DS274