tooling materials used in reaction injection molding factory
TRANSCRIPT
![Page 1: Tooling Materials Used In Reaction Injection Molding Factory](https://reader036.vdocuments.us/reader036/viewer/2022081604/58abc4621a28ab68068b49bf/html5/thumbnails/1.jpg)
Tooling Materials Used In Reaction Injection Molding Factory
www.honkia.com
![Page 2: Tooling Materials Used In Reaction Injection Molding Factory](https://reader036.vdocuments.us/reader036/viewer/2022081604/58abc4621a28ab68068b49bf/html5/thumbnails/2.jpg)
Silicone rubbers are used in making Reaction Injection Molding Factory as it is equipped with
very low quantities of
dimensionally non-critical parts.
www.honkia.com
![Page 3: Tooling Materials Used In Reaction Injection Molding Factory](https://reader036.vdocuments.us/reader036/viewer/2022081604/58abc4621a28ab68068b49bf/html5/thumbnails/3.jpg)
Resin molds are used for components requiring more detail and better
physical properties.
These urethane and epoxy resin molds are processed with foamed urethane systems.
www.honkia.com
![Page 4: Tooling Materials Used In Reaction Injection Molding Factory](https://reader036.vdocuments.us/reader036/viewer/2022081604/58abc4621a28ab68068b49bf/html5/thumbnails/4.jpg)
One of the advantages of Reaction Injection Molding Factory processed foam is that a high-density skin is formed with a low-density
core.
www.honkia.com
![Page 5: Tooling Materials Used In Reaction Injection Molding Factory](https://reader036.vdocuments.us/reader036/viewer/2022081604/58abc4621a28ab68068b49bf/html5/thumbnails/5.jpg)
Spray metal molds offer better control of surface quality and enhanced moldability.
This mold-building technique bridges the gap between low-volume prototype and medium production tooling.
www.honkia.com
![Page 6: Tooling Materials Used In Reaction Injection Molding Factory](https://reader036.vdocuments.us/reader036/viewer/2022081604/58abc4621a28ab68068b49bf/html5/thumbnails/6.jpg)
A composite system with an epoxy and aluminum chip mixture acts as the backup structure for the thin metal
surface.
Aluminum frames are cast to act as a mold base for
mounting ejector systems, mix head, side pulls, and to
ultimately mount to a production press.
www.honkia.com
![Page 7: Tooling Materials Used In Reaction Injection Molding Factory](https://reader036.vdocuments.us/reader036/viewer/2022081604/58abc4621a28ab68068b49bf/html5/thumbnails/7.jpg)
Aluminum is a must be material to be used because it has the maximum
physical properties of the urethane material system.
www.honkia.com
![Page 8: Tooling Materials Used In Reaction Injection Molding Factory](https://reader036.vdocuments.us/reader036/viewer/2022081604/58abc4621a28ab68068b49bf/html5/thumbnails/8.jpg)
A properly cooled aluminum mold is able to control the heat of reaction during the molding
process. It is not allow exotherm overrun and hot spot induced internal stresses.
www.honkia.com
![Page 9: Tooling Materials Used In Reaction Injection Molding Factory](https://reader036.vdocuments.us/reader036/viewer/2022081604/58abc4621a28ab68068b49bf/html5/thumbnails/9.jpg)
Contact Us
HONKIA PROTOTYPE CO., LIMITEDShenzhen factory : 6 Tianyang 7 Road, Datianyang Industrial Park Songgang,
Baoan, Shenzhen 518105, China Tel : +86 755 2369 8005 Fax : +86 755 2945 7540
Skype : andy.rapid.prototypeEmail : [email protected]
Hong Kong address : Unit 2508A, 25/F, Bank of America Tower12 Harcourt Road, Central, Hong Kong
www.honkia.com
![Page 10: Tooling Materials Used In Reaction Injection Molding Factory](https://reader036.vdocuments.us/reader036/viewer/2022081604/58abc4621a28ab68068b49bf/html5/thumbnails/10.jpg)
You can find Reaction injection molding factory in
www.honkia.com as they are one of the best manufacturers and providers of such oil
refining machine with various specifications.
www.honkia.com