today we will deal with two important problems: 1.law of mass action 2. michaelis menten problem....
TRANSCRIPT
Today we will deal with two important Problems:
1. Law of Mass Action
2. Michaelis Menten problem.
Creating Biomodel in Vcell we will solve these two problems
The Law of Mass Action (by Norwegian scientists 1864–79CCato M. Gulberg and Peter Waage)
Cosider this chemical reaction equation in which reactants A and B react to give product AB.
A + B AB
The mass action law states that if the system is at equilibrium at a given temperature, then the following ratio is a constant.
[ ]
[ ][ ] eq
ABK
A B
That is, the rate of a reaction is proportional to the product of the active masses of the reagents involved. This is the ideal law of chemical equilibrium or law of mass action.
More explicitly....
In a chemical reaction ---
A+B AB
the "chemical affinity" or "reaction force" between A and B did not just depend on the chemical nature of the reactants, but also depended on the amount of each reactant in a reaction mixture.
The affinity or the reaction force between A and B = kf [A] [B]Kf is affinity constant.
kf
kr
forward reaction rate= kf [A] [B]backward reaction rate= Kr[AB]
At equillibriumforward reaction rate = backward reaction rate
[ ]
[ ][ ]f
eqr
K ABK
K A B
Now create a New Biomodel DocumentConsider the case where A and B reacts to produce AB
A+BAB. Lets start with the following steps---
•Give name of the unnamed compartment
•Add specieses A,B and AB
•Set reaction
•Set Reaction Kinetic Editor
•Kinetic type Mass Action
•Put Value of Kf and Kr
•Save the Model with a name.
•Go to Application NewDeterministic
•Name the Application (again we will be doing compartmental application) and OK.
•Put volume=1 in Structure Mapping Text.
•Click Initial Condition Text and assign Value of A and B.
•Save the Model once again to View Math and to start Simulation.
Note the Mathcomment,Which says MathModel is already generated by the software.
We can view Math Equations or View VCMDL
Now click simulation Text to run the Simulation.
See Results and play with the different parameters by clicking Edit .
Exercise:
Run Simulation with the following parameter value----Kf =1 , Kr =1, Ainit= 1, Binit = 1
Check these two points.
- Keep all parameters the same as given on this slide, and start increasing parameter Ainit.
Make initial AB zero. Is equilibrium reached faster? Does stable AB concentration increase? Why?
- Keep all parameters the same as given on this slide, and start increasing parameter kr.
Make initial AB zero. Is equilibrium reached faster? Does stable AB concentration increase? Why?
Keep all the parameters =1.0 and increase Ainit, see the stable concentration of AB.
Increase Kr, see Equillibrium is reached faster.
At equillibrium,forward reaction rate = backward reaction rate
Go back to the equations to verify your results.
Michaelis-Menten Kinetics(by Leonor Michaelis and
Maud Menten in 1913 )
M-M kinetics approximately describes the kinetics of the Enzyme.The most convenient derivation of the Michaelis–Menten equation, is obtained as follows:
The enzymatic reaction is assumed to be irreversible, and the product does not bind to the enzyme.
E+S ES E+P
Kf
Kr
Kp
Enz+SubEnz-Subs-complex Enz+Prod
Now our aim is to analyze this mechanism. With Vcell we can find the reactionrate of production of the product P and the complex ES and also study the impactsof several rate constants Kf,Kr,Kp.
The Michaelis-Menten equation relates the reaction rate V = to the substrate concentration [S]. The corresponding graph is a hyperbolic function; the maximum rate is described as Vmax.
dt
dP
][
][max
SK
SVV
dt
dP
M
rM
f
KK
K
Now, consider the rate of effective production of P :
,Vmax =KP* [E]in
Start with a new Biomodel:
•Name the compartment
•Add Specieses S, E, ES, P
•Set the Reactions
•Set Reaction kinetic Editorfor two reactions.
•Set General as the kinetic Type
Now we have to set the Reaction Rates.
Here We have two reactions:
1.Substrate binding, where E and S react to produce the complex ES
Reaction rate J_reaction0= Kf*[E]*[S] - Kr*[ES] - KP*[ES]
2.Catalytic Step, where ES dissociates to produce P and E
Raction rate J_reaction1 = KP*[ES]
Now go to File>Save as... to save the model.
Remember two assumptions:
1. A lot of substrate molecules, very few ‘expensive’ enzymes ( [S]>>[E]), so [S] does not change much for a long time.
2. The system is in steady-state, i.e. that the ES complex is being formed and broken down at the same rate, so that overall [ES] is constant .
•Go to ApplicationNewDeterministic
•Name the Application and OK.
•Put volume=1 in Structure Mapping Text.
•Click Initial Condition Text and assign Value of E and S.(Remember E<< S)
•Save the Model once again to View Math and to start Simulation.
•Math Model will be generated Automatically.
Steps are same as Mass-Action
Clicking View Math we can see the Math Model generated by the software
With the radio button we can see the value or name of the parameter eqn.
Run the Simulation:
Clicking Edit we can change different parameters
•Analyze formation rate of ES, P with time or with other parameter.
•We can choose Graphical results or data values by clicking
1 1 1, , , 1 , 100 , 0, 0
sec sec secf r p in in in inK K K E M S M ES P
M
Consider the parameter values as follows:
Exercise:
1. Run simulation for t= 1, 5 and 10 seconds.
2. Keep all parameters the same as given on this slide. Solve the chemical reaction equations. Discuss the results. Compute V, check if the formula for V in the previous slide is correct.
3. Make and solve the chemical reaction equations again. Discuss the results. Does Michaelis-Menten approximation still work?
1in
S M
][
][max
SK
SVV
dt
dP
M
r
Mf
KK
K ,Vmax =KP* [E]in
See math description for J_reaction1
J_reaction1 = V, calculate V.
Check how V changes with [S]in
For small value of S, say [S]in = 1.0 uM