A leader in customer-defined Value Add Services, Teledyne Microwave Solutions (TMS) partners with the aerospace community to support military, space and industry level requirements through the life of the product.

Your single source for microwave electronics, Teledyne Microwave Solutions (TMS) delivers the world’s most advanced microwave technologies for demanding aerospace, military, commercial and industrial applications.

Environmental Screening to MIL-PRF-19500,

MIL-PRF-38534, MIL-PRF-38535, MIL-TD-883,

MIL-STD-750

Element Evaluations

LATs performed on die or packaged devices, including transistors, diodes, MMICS

Full DC and RF Testing up to 40 GHZ on all types of products

A complete Environmental Test Lab which includes full burn-in capability including RF burn-in

Increase product yields, reduce labor, scrap/rework and tuning

Environmental Screening to MIL-PRF-19500,

MIL-PRF-38534, MIL-PRF-38535, MIL-TD-883,

MIL-STD-750

Element Evaluations

LATs performed on die or packaged devices, including transistors, diodes, MMICS

Full DC and RF Testing up to 40 GHZ on all types of products

A complete Environmental Test Lab which includes full burn-in capability including RF burn-in

Increase product yields, reduce labor, scrap/rework and tuning

Teledyne Microwave Solutions offers chip-and-wire assembly of products ranging from single die through complex hybrids, which can then be submitted to a combination of customer specified RF and DC testing and environmental screening. We perform Lot Acceptance testing on packaged devices or bare-die, including diodes, transistors, and MMICs, with test capabilities to 40 GHz. A complete portfolio of component, manufacturing, screening, and testing services are available including device sorting, labeling, lead forming and tinning, and tape-and-reel packaging.

Environmental ScreeningTeledyne Microwave Solutions is a full service MIL-STD-750 and MIL-STD-883 environmental test laboratory and program management organization. Individual environmental tests or full qualification/ screening programs can be conducted to standard military or customer proprietary specifications, including MIL-PRF-19500, MIL-PRF-38534, MIL-PRF-38535 Groups A, B, C, D, and E testing. Following are example product types that we routinely screen and typical screening services.

Product Types• Amplifiers• Die (transistors, diodes and MMIC element evaluation)• Packaged Transistors and MMICs• Diodes; Axial, Beam-Lead• Frequency Dividers (Pre Scalars)• Mixers• Custom Packaged Devices• Additional Product Test Capabilities: Voltage Controlled

Attenuators, Detectors, Power Dividers, Filters, VCOs

Screening Services• Internal Visual (assemblies, assembled components)• Stabilization Bake• Temperature Cycle• Constant Acceleration• PIND (Particle Impact Noise Detection)• HTRB (High Temperature Reverse Bias)• Burn-In / Life Test• Electrical Parameter Testing (DC and RF to 40 GHz)• Seal (Fine/Gross)

• Radiographic • External Visual• Bond Pull/Die Shear• Solderability• Lead Integrity • SEM (Scanning Electron Microscope)

Electrical Test CapabilitiesOur full DC, RF and microwave test capabilities make your choice easy for element, hybrid, component, and subassembly testing requirements. Using fully documented and controlled test procedures, Teledyne Microwave Solutions quickly provides go/no-go or complete RF test results from ambient to full military/space temperature extremes. You can specify the testing parameters, temperatures and data format. Quick, accurate, reliable results; Teledyne Microwave Solutions is your first and best choice for testing requirements.

RF Power Test: Selection and Sort (80 MHz to 2800 MHz)• CW to 200 Watts• Single, Multiple or Burst Pulse Formats• Example Test Parameters: Pout, Power Gain, PAE• Custom Test Capability: High Frequency, IP3, Load Pull, Mismatch VSWR

DC Test: MMIC and Transistors• FET: IDSS, VP, GM, Breakdown Voltage, IGSS• MMIC: IDD• BiPolar: ICBO, IEBO, HFE, BVCEO, BVCBO, BVEBO

RF Test: MMIC and Transistors (100 kHz to 40 GHz)• Small Signal Gain, P-1dB, Psat, VSWR, Reverse Isolation Noise Figure, IP3, Harmonic• Phase Noise• Phase and Amplitude Matching• Over Temperature• S-Parameter Testing

Microcircuit and Semiconductor Die EvaluationExamples of full Microcircuit and Semiconductor Die evaluation per MIL-PRF-38534 are shown below. Teledyne Microwave Solutions supports other industry standard and custom screening and evaluation sequences, including diode screening from MIL-DLT-28837.

Build To Print Assembly Service• Simple Die through Complex Hybrids• Hermetic Sealing Available• Passive and Active Components

Die ServicesTeledyne Microwave Solutions offers full die handling services including quick, reliable and cost-effective sorting

of die. Our die services help you maintain a consistent flow of die to your manufacturing environment in volumes and at the quality level appropriate to your needs while increasing the reliability and manufacturability of COT parts. Teledyne Microwave Solutions also provides qualified die through 100% visual inspection and Lot Acceptance Testing for space and military level applications.

Die Visual, Sorting and Packaging• Store Wafers (Dry Nitrogen Desiccators)• Die Visual - Commercial Level - Military Level and S-Class to MIL-PRF- 19500, MIL-STD-750, MIL-STD-883, MIL-PRF-38534, MIL-PRF-38535• Die Package in Waffle or Gel Packs - Facilitate automated pick-and-place or manual transfer

ESD Testing Services• Human Body Model (HBM)• Machine Model (MM)• Testing performed per ESDA, JEDEC and MIL-STD-883, Method 3015

CLASS H CLASS K Element Electrical Element Electrical Element Visual Element Visual Internal Visual Internal Visual Final Electrical Temperature Cycling Wire Bond Evaluation Constant Acceleration Attribute Data / Certificate of Conformance Interim Electrical Burn-in Post Burn-in Electrical Steady State Life Final Electrical Wire Bond Evaluation SEM Examination

Value Add Key CustomersRaytheon EADS BAE

General DynamicsSpace Systems Loral

L3-Narda WestLockheed Avnet

Key ProgramsPatriot

Euro FighterClassified SpaceGPS Laser

Medical / Industrial

High Reliability ProductsTeledyne Microwave Solutions has a long heritage of providing value add services

to the aerospace community (military, space and industry level requirements).

1274 Terra Bel la Avenue • Mounta in V iew, CA 94043 • 650-691-9800 • Fax 650-962-6845www.te ledynemicrowave.com • emai l : microwave@teledyne.com

In fo rmat ion sub jec t to change w i thou t no t i ce .

Teledyne Microwave Solutions has an outstanding Quality Management System certified by DSCC to

MIL-STD-38534, Class H & K, with TRB Option for Class K as well as ISO 9001-2000 and AS9100

AvagoFujitsu/Eudyna

NECRFMD

MA/COMTriQuintM-Pulse

SkyworksCTCNXT

Hittite

Teledyne Microwave Solutions typically up screen active die from following die manufacturers