TKC-8 User InstructionsThe Nova Knee Cruiser is an excellent mobility device for foot or ankle injuries that require the patient to not put weight on the affected area. It can be a great long or short term alternative to crutches or folding walkers that can have adverseaffects such as back or under arm pain from extended use. The Knee Cruiser allows the user to maintain an active and more independent lifestyle which will help them progress to a quicker recovery.

Knee Cruiser Features • Oversized contoured padded platform pad (comfortable & long lasting)• Durable anatomical rubber handles• Steering assembly allows the user to easily maneuver and helps maintain better stability• Large 8” wheels provide a smooth ride over uneven surfaces• Locking hand brake provides speed control and allows user to stay in a single position without rolling during everyday tasks• Quickly adjusts for right or left leg injuries• Easy to fold down steering column is convenient for transport and compact storage

Specifications• Weight Capacity: 300 lbs.• Weight: 26 lbs. • Approximate Patient Height: 5’2” - 6’4”• Platform Height Adjustment: 17” - 22.5”• Handle Height Adjustment: 31” - 39”

Steering Column SetupThe steering column will be in the folded position for transport from the factory. This feature also makes transporting the knee scooter quick and convenient during everyday use (see image 1).

To Raise the Steering Column (standing in front of the unit)• Push the lever at the base of the steering column to the right and pull thesteering column upward until it is in the fully upright position (see image 2).• Push the lever back to the left so that the pin engages into the opening of the steering column base (see image 3).• Push the locking mechanism up so that the circular pad rests on top of the steering column. Turn the lever to the side and push down to lock the steering column in the upright position (see image 4).

To Lower the Steering Column• Pull the lever up to release the clamp from the steering column plate and allow the lever to fall forward to disengage. • Gently guide the steering column downward.

Steering Column Height Adjustment• Remove the height adjustment screw from the steering column and adjust the telescoping tube to your desired height. • Replace the height adjustment screw and tighten until the steering column is secure. The red button can be pushed to adjust the angle of the handle (see image 5).

1

2

3

4

5

Knee Platform Set-UpThe Nova Knee Scooter can be used for right or left leg injuries. The offset position of the seat provides better stability and increased foot clearance for pushing forward. When standing behind the scooter, the knee platform should be offset to the left for right leg injuries and offset to the right for left leg injuries (see image 6).

Knee Platform Height Adjustment• Insert the knee platform post into the frame so that the adjustment holes line up with the alignment screw (see image 7).• Release the platform clamp and unscrew the alignment screw until it can be pulled outward to allow the platform post to freely slide into the frame. The screw is spring loaded and will slide into the desired hole when released. • Adjust the platform to the desired height and allow the spring loaded screw to slide into the selected hole. Securely tighten the alignment screw to the post. • Tighten the platform clamp so that it securely holds the post at your desired position. IT IS IMPORTANT THAT THIS IS SECURELY HOLDING THE KNEE PLATFORM. TEST BY PUSHING DOWN ON THE SEAT WITH YOUR BODY WEIGHT BEFORE USE (see image 8).

Brake Adjustment Instructions• To control speed - Simply squeeze the handle towards you.• To lock wheels - Push the handle away from your body until it clicks into the

locked position (see image 9).

Brake Adjustments If you find it difficult to squeeze/lock the brake handle or that the brake shoe isnot engaging the wheel then you may need to adjust the brake (see image 10).

• To Release Tension (make it easier to squeeze or lock)Be sure the brake is in the unlocked position. Turn the brake adjustment screw counter clockwise until the desired tension is achieved. Test after each 1/2 turn. The brake should lock the wheel when in the locked position. Screw the locking nut against the brake casing to secure your desired setting (see image 9).

• To Increase Tension (make the brake engage sooner)Turn the adjustment screw clockwise until the desired tension is achieved. Test after each 1/2 turn. The brake should lock the wheel when in the locked position.

Screw the locking nut against the brake casing to secure your desired setting.

*WARNING*

FAILURE TO FOLLOW ANY OR ALL SAFETY INSTRUCTIONS MAY RESULT IN SERIOUS INJURY OR DEATH

• Consult a trained healthcare professional or dealer before using the knee scooter. • Besurethatthesteeringcolumnlevermechanismistightenedandfully engaged before each use (see image 4).• Besurethatthesteeringcolumnheightadjustmentscrewissecureand tight before each use (see image 5).• Besurethatthealignmentscrewandheightadjustmentleverarefully tightened before using the knee scooter (see image 5).• Recklessusageofthisproductincludes,butisnotlimitedto,scooting toofastand/oruseoverbumpsandhills.

7

8

9

10

Customer Help Line:1-800-557-6682

www.NovaMedicalProducts.comP.O.Box3039,Gardena,CA90247

6