tire balancing tire balancing wear your safty glasses!!!
TRANSCRIPT
TIRE BALANCING
Tire Balancing
WEAR YOUR SAFTY GLASSES!!!
KNOW YOUR TOOLS
TIRE WIDTH CALIPER
WEIGHT HAMMER
Select Proper Inner Alignment Cone
PUT TIRE ON MACHINE
Carefully Place Wheel Onto Balancer Quill Shaft
Slide Wheel Fully Up Onto Inner Cone
Use Hub Nut (spinner) to Tighten Wheel onto the Balancer Quill
MEASURE TIRE WIDTH WITH CALIPER
Determine “Away” Determine “Away” Distance Distance
Using Laser Arm Using Laser Arm
Determine “Diameter” From Tire Size Listing Determine “Diameter” From Tire Size Listing On Both Sides of TireOn Both Sides of Tire
Wheel Balancer DISPLAY SCREEN
Insert “W”idth, “D”iameter, & “ A”way
Settings into Balancer Display
After you are done entering the width on the keypad then put the shield down and
the machine will test the tire and give you the results.
Select to Correct Amount of Weight From the Sorting Tray
After the machine gives you the results put the correct amount of weight on
both sides of the tire.
Align the Balance
Line As Shown,
Add the Amount
Of Weight Displayed
At the 12:00 Position
Of the Wheel.
The Final
Result Should
Be ‘Zeros’ in
the Left &
Right Plane
Displays
Remove the Finished Wheel From the Balancer, Put Away
All Weights &
Weight-Tools, Fill-Out Task Sheet With Required Info
CLEAN UP AFTER YOURSELVES. TAKE CARE
OF YOUR WORK SPACE