the sand center - off road parts pdf - cbperformance.netcbperformance.net/pdf/cb performance - the...

THE SAND CENTER - OFF ROAD PARTS

http://cbperformance.com 01

CNC Dual Master Cylinder Pedal AssemblyYour car will have completelyindependent front and rearbraking systems for safety andcontrol. Features a fully adjustableequalizing bar which permits exactpressure adjustments on front andrear wheel cylinders. A special pivotbearing and threaded Heim Jointsassure safe and easy push rod travel.

6087 CNC Dual Master Cylinder Pedal Assembly

CNC 2 Wheel BrakesThe complete set-upfor long trouble freeoperation. Smootheasy pedal action and quickstops. This kit is easy to installand is the ultimate in customhydraulic equipment. The hydraulicslave cylinder actuates yourclutch for crispaction in all drivingconditions.

6618 CNC Floor Mount Master Cylinder - 5/8'' Bore 6619 CNC Floor Mount Master Cylinder - 3/4'' Bore6081 CNC Hydraulic Clutch Kit - Pedal Assembly, Slave Cylinder

CNC Replacement Master CylindersComplete & Ready to Install.

Made by CNC.

6168 CNC Replacement Master Cylinder - 3/4'' Bore 6169 CNC Replacement Master Cylinder - 5/8" Bore

CNC Optional Easy Fill CoverQuickly and easilyadd more brake fluid!

For use with CNCDual Master CylinderPedal Assemblies.

6124 CNC Optional Easy Fill Covers (each)

6083 CNC 2 Wheel Brakes w/Cable Throttle Pedal (VW & Corvair)

CNC Hydraulic Clutch KitFits Type 1 through 4 trans-missions with 4 and 5 speeds,is easy to install, and providessmooth positive starts and shiftsin all terrains. The pedal assemblybolts to the floor of most frames,and features an aluminum mastercylinder and reservoir. Can also bemounted inverted, underthe dash of off-road andrace cars.

CNC Floor Mount Master CylinderCan be used to poweryour brake systemor hydraulic clutch.

10 1/4" pedal length provides5.2 to 1 ratio to provide morethan adequate braking power.

6643 6644

6645

6647

6648

6646



CNC Repair Kits

6643 CNC Throttle Cable Bracket 6644 CNC Throttle Cable Extension6645 CNC Throttle Cable Extension (cut to size)6646 Hook Clamp - for quick cable removal. 6647 Cable Clamp & Shim6648 Aluminum Half Clamp

CNC Slave CylindersClutch Slave Cylinder canbe used with most anymaster cylinder.

6076 CNC Clutch Slave Cylinder - VW Pull Style (cylinder only) 6493 Slave Cylinders - Universal Push Style6494 Slave Cylinders Push Rod6495 Slave Cylinders - Universal Pull Style

CNC Sheathed Cable

Made by CNC. CNC Throttle Cables are similar to, and inter-changeable with Morse control cables. CNC cables can be usedto push or pull the throttle. Cable ends are ridged and fitted withthreaded ends to provide for attaching various connectors.

6639 CNC Sheathed Throttle Cable - 7’ length6640 CNC Sheathed Throttle Cable - 8’ length6641 CNC Sheathed Throttle Cable - 9’ length6642 CNC Sheathed Throttle Cable - 10’ length

CNC Throttle Cable Accessories6643 - Attaches to CNC Hydraulic Throttle Pedalto provide a connection for throttle cable. 6644 - Made by CNC. Self locking clevis,used on adjustable mounting plates.

6135 CNC Master Cylinder Kit - 3/4” bore - Brake/Clutch Cylinder w/Round Reservoir6136 CNC Brake Master Cylinder Repair Kit - 3/4” bore - Cylinder w/Square Reservoir6137 CNC Brake Master Cylinder Repair Kit - 7/8” bore - Cylinder w/Square Reservoir 6138 CNC Turning Brake Repair Kit - 5/8” bore - Dual Handle Assembly6139 CNC Turning Brake Repair Kit - 3/4” bore - Dual Handle Assembly6140 CNC Turning Brake Repair Kit - 5/8” bore - Single Handle Assembly6141 CNC Turning Brake Repair Kit - 3/4” bore - Single Handle Assembly6142 CNC Sand Buggy Rear Disc Brake Replacement O-Ring Kit6143 CNC Sand Buggy Rear Disc Brake Replacement Piston 6144 CNC Clutch Slave Cylinder Rebuild Kit - Pull type cylinder - 7/8” bore6191 CNC Master Cylinder Kit - 5/8“ bore - Brake/Clutch Cylinder w/Round Reservoir 6492 CNC Clutch Slave Cylinder Rebuild Kit - Push type cylinder - 7/8” bore

6135

6139



CNC Turning Brake Dual HandleSingle Straight Handle Turning Brakes allowinstallation where two handle brake assemblieswill not fit. They are equipped with a singlechrome handle and an anodized aluminum knob.A 7/8" bore is suggested foruse with drum brakes, thelarger 3/4" bore size shouldbe used with disc brakes.

6074 CNC Turning Brake - Dual Straight Handle (5/8” Bore)6347 CNC Turning Brake - Dual Straight Handle (3/4” Bore)

CNC Turning Brake Single Handle5/8" bore sizes are most often used with drum brakes,disc brakes require the use of 3/4" bore cylinders.

CNC Dual Handle Turning Brakes havechrome plated handles and anodizedaluminum knobs.

6486 CNC Staging Brake - Angled Handle (3/4" bore)6488 CNC Staging Brake - Straight Handle (3/4" bore)

6336 CNC Turning Brake - Dual Angled Handle (5/8” Bore)6349 CNC Turning Brake - Dual Angled Handle (3/4” Bore)

Replacement PartsMade by CNC. Replacementknobs and clevis with pinfor turning brakes, handbrakes and master cylinders.

6622 Clevis & Pin (Red) 6623 Clevis & Pin (Blue)6625 Turning Brake & Hand Brake Knob (Red) 6626 Turning Brake & Hand Brake Knob (Blue)6627 Clevis & Pin (Red) 6628 Clevis & Pin (Blue)

CNC Hand Brake Made by CNC.

6489 CNC Hand Brake - 5/8" bore 6490 CNC Hand Brake - 3/4" bore

6346 CNC Turning Brake - Single Straight Handle (3/4” Bore)6348 CNC Turning Brake - Single Angled Handle (3/4” Bore)

CNC Turning Brake Dual Angled Handle

Can often be utilized whenstraight or vertical handles interfere with the shifter, dash or otherhardware. Equipped with a single chrome handle and an anodizedaluminum knob. A 5/8" bore is suggested for use with drum brakes,and the larger 3/4" bore size should be used with disc brakes.

CNC Staging BrakeMade by CNC.

6634 6635 6636 6637 6638 4339 Master Cylinder Plug



Residual Pressure ValvesThe JAMAR Pro-X Series Shifter features a sealed hardenedstainless steel selector shaft and shift lever. The housing ismanufactured from 6061 Billet Aluminum and comes witha Polished Finish.

The All New Design allows shifting into reverse by pushingdown and pulling back; no more two handed shifting aswith the old super shifter.

Metric Bubble FlareThese sometime hard-to-find fittings are now available in one convenient location.Great for plumbing a new buggy or just to replace a broken or lost part.

6634 3/16'' American Line to Metric Thread Bubble Flare - Coupler6635 Metric Bubble Flare - Female to 1/8'' Pipe - Male - Straight6636 Metric Bubble Flare - Female to 1/8'' Pipe - Male - Elbow 6637 Metric Bubble Flare - Male to 3/16'' American Line Female - straight6638 Metric Coupler

6112 Residual Pressure Valve - 2 lb. (1/8" NPT)6609 Residual Pressure Valve - 4 lb. (metric) 67-later 6624 Residual Pressure Valve - 10 lb. (1/8" NPT)

Master Cylinder PlugFor use toplug outletsin VW MasterCylinders.

61156116

6117

6118 6119

6154 6491



JAMAR Brake Pedal AssemblyA dual master cylinder witha balance beam to provideindependent adjustment offront and rear braking force.

6203 JAMAR Brake Pedal Assembly - w/Slim Line Master Cylinder & Easy Fill Tops

JAMAR Clutch PedalA great looking JAMARcompetition clutch pedalwith a billet slave cylinder.

6115 JAMAR Billet Sand Buggy Pedal Assembly Repair Kit - 11/16 bore Clutch Cylinder6116 JAMAR Billet Sand Buggy Pedal Assembly Repair Kit - 19mm bore Brake Cylinder6117 JAMAR Billet Clutch Slave Cylinder Repair Kit 6118 JAMAR Billet Turning Brake Repair Kit - 3/4" bore - Dual Handle6119 JAMAR Sand Buggy Disc Brake Repair Kit6154 JAMAR Billet Turning Brake Repair Kit - 5/8" bore - Dual Handle6491 JAMAR Compact Turning Brake Repair Kit - 5/8" bore

JAMAR Steering Box CoverAdd glitz to the ugliestpart on your dunebuggy, the steering box!

It's designed to bolt rightonto all T-1 steering boxes.

It's 100%, reliable in form and functionbecause it adds strength and custom looks to your dune buggy.

6151 JAMAR Billet Steering Box Cover

JAMAR Park LockPush on the brake pedal, depress thePark Lock and your brakes are locked.

To release, just step on the brake pedal.

Fits most any vehicle and can beused to stage on hills. (Uses 1/8"NPT)

6077 JAMAR Park Lock

6202 JAMAR Clutch Pedal with 11/16'' Slave

JAMAR Billet Repair KitsKits include everything you needto rebuild your JAMAR TurningBrakes, Pedal Assemblies andClutch Slave Cylinders.



CNC Adjustable Pedal Mounting PlateMounts on the floor of the vehicle and allows you to quicklyadjust your pedal assembly to the drivers height.

It can be used with all dual master cylinder assemblies.

Three different locations provide fast adjustmentfor any driver CNC machined from heavy gaugealuminum plate and brush finished tocompliment your vehicle.

6194 CNC Throttle Pedal with Foot Brace (angled)6189 Throttle Pedal - CNC

Turbo Throttle PedalGives you precise throttle control and customappearance. It bolts right into '66 and laterType-1 and Type-3 VW's to replace thecomplete factory throttle assembly.Manufactured from cast aluminumfor increased strength, rigidityand smooth action.The pedal rides on analuminum roller to assurefull throttle response andquick "no jam" operation.

6098 Turbo Throttle Pedal

JAMAR Pro-X Billet Aluminum Throttle PedalLooks fast just mounted in your car.Great fit and feel combined with anadjustable throttle cable mountmake this a perfect pedal for thestrip or sand.

6186 JAMAR Pro-X Billet Aluminum Throttle Pedal

6120 Adjustable Pedal Mounting Plate - CNC

CNC Throttle PedalMade by CNC.

Machined from cast aluminum to providerugged no-nonsense throttle control.

It bolts solidly to the floor of your carand is equipped with a return spring.

Fits dune buggies and race cars.

CNC Throttle PedalMade by CNC. The racers choice withadjustable forward and rear stops,side foot rest, and non-skid surface.

3 cable mounting positions providecable action best suited for your engine.



JAMAR Billet Front BeamNEEDS DESCRIPTION.

JAMAR Adjustable Billet Front BeamsThe mostbeautifulFront Beamsyou can installare manufacturedby JAMAR.

Light weightand full on billet!

6235 JAMAR Front Beam - Adjustable w/o Shock Towers 6236 JAMAR Front Beam - Adjustable with Shock Towers6239 Replacement Bushings - JAMAR or Warrior Beam (set of 4)

In/Out BushingsNEEDS DESCRIPTION.

6245 In/Out Bushings - Needle Bearing Link Pin (set of 4)6246 In/Out Bushings - Ball Joint (set of 4)

JT Aluminum Front Beam

If you are into Sand Rails, you've gotta have one of these superlightweight JT Aluminum Front Beams. Accepts stock or highperformance spindles and torsion leaves. Beams are designedto fit early link pin style frames.

6275 Front Beam - JT Aluminum with Shock Towers6276 Replacement Bushings for JT Beam (set of 4)

6263 JAMAR Front Beam - w/o Shock Towers (No Adjusters) 6264 JAMAR Front Beam - with Shock Towers (No Adjusters)

Lightweight,strong and easy

to install.



Buggy Whip Bulb ShieldFits snugly over the BuggyWhip light socket.

Part # 6157 6158 6183 6184Color Amber Green Red Blue6155 Buggy Whip Bulb (35 Watts)6223 Buggy Whip Bulb Shield Cover

Buggy WhipsManufactured from ruggedwound fiberglass and equippedwith a brilliant red flag. Whipsare supplied with mountinghardware and an electricalconnector.

6192 Red White & Blue LED Whip Light - Flashing 6193 Red White & Blue LED Whip Light - Non-Flashing

Part # 6195 6196 6197 6198Color Blue Red Amber Green

Hinged Billet Whip MountClamps on to 1 1/2" tubing.

6219 Hinged Billet Whip Mount - Clamp On (1 1/2'' tubing)

6150 Buggy Whip Flag - Replacement6170 Buggy Whip - 5 ft. Non-Lighted Econo 6173 Buggy Whip - 8 ft. Non-Lighted Econo6180 Buggy Whip - 5 ft (with light connector) 6181 Buggy Whip - 8 ft (with light connector)6182 Buggy Whip Quick Mount

Buggy Whip Lamp ShieldBulb is completely enclosedand protected from theenvironment.

Available in four colors:Blue, Amber, Red & Green.

LED Whip LightFits standardpole socket.

Perfect additionto your lightedDune Buggy Whip.

Use it at base camp to find your way home. Draws less than onehalf amp. Solid state with LED lights and designed to outlastyour vehicle.



CROW 2” Street & Buggy HarnessThe 2" Street and Buggy Harness is light weight enough to be comfortable,but it's all serious business. It's sewn from sturdy nylon webbing, and theseat belt ends are double stitched into heavy gauge plated steel mounts.

The shoulder harness is finished in universal "Y" style to allow roll bar orfloor mounting. Street and Buggy Harnesses are equally at home in asand buggy, baja bug, or street sedan.

Choose from Grey, Blue, Red, or Black, nylon straps.

3" Sand Buggy Harness (one seat) floor mountPart # 7033 7040 7041 7042Color Grey Black Blue Red3" Sand Buggy Harness (one seat) roll bar mountPart # 7034 7043 7044 7045Color Grey Black Blue Red

CROW 3” Shoulder HarnessExceeds all Mil-Spec standards and designed for use with3" Competition Lap Belts. The forged steel hardwareconnects to the latch assembly for quick entry/exit.

All 3" Shoulder Harnesses come with special"off-road" adjusters that are equipped with springtensioners to prevent accidental loosening while in use.

7046 CROW 3" Shoulder Harness - Black (one seat) roll bar mount 7047 CROW 3" Shoulder Harness - Black (one seat) floor mount

2" Street & Buggy Harness (one seat) floor mountPart # 7033 7040 7041 7042Color Grey Black Blue Red

CROW 3” Sand Buggy HarnessPatterned after the 3" seat belt used in NHRA competition and manufacturedto prevailing Mil-Spec standards. 2" adjustable Shoulder Straps connect to thelatch assembly for quick entry/exit. The ultra quick/latch type buckle is manu-factured from forged steel. Shoulder straps are available in roll bar or floormount styles. This series of seat belts has been specially designed for sandbuggies and baja bugs. It's heavy duty 3" belt will keep you nailed in the seat.

Measures 59"around the lapbelt, from eyeletto eyelet.



5 Way HarnessCombines the 3" Competition lap,3" Shoulder Harness and the Anti-Submarine Belt in a complete raceready resistant system.This setup does it all! You have your choiceof roll bar or floor mountshoulder harness, and theassurance that you havethe finest in driver protection.

7014 CROW 5 Way 'V' Harness, Snap-In (one seat) 7015 CROW 5 Way 'Y' Harness, Snap-In (one seat)

3” Competition Lap BeltApproved by all racing associations.

Full 3” in widthand equippedwith specialquick release.

May be used with Shoulder Harnesses,and Submarine Belts. Necessary hardwareissupplied with each belt.

7028 2 Point Seat Belts - Black w/Wolfsburg Logo (two seats)7030 3 Point Seat Belts - Black w/Wolfsburg Logo (two seats)

Floor Mount Washer KitNEEDS DESCRIPTION.

6593 Floor Mount Washer Kit

Seat Belt BoltsOEM Forged Seat Beltbolts thread rightinto all VW Sedanpans and door poststo mount all VW seatbelt assemblies.

These bolts are shipped in sets of 4,and can be used to mount front or rear seat belts.

7020 Seat Belt Bolts - VW (set of 4)

7001 CROW 3" Competition Lap Belt - Black (one seat)

Anti-Submarine Belt

Designed to work with 3" Competition Lap Belts. Connects tofloor of car to help keep driver from sliding forward duringsudden deceleration and stops.

Quick disconnects for fast entry and exit.

Seat BeltsBolts into standardfactory locations.

Features widecomfortablebuckles witheasy releasebuttons. Double stitched from SAE approved nylon webbing.

Shipped in complete sets to fit 2 seats.

7011 CROW Seat Belt - Anti-Submarine Belt - Black (one seat)



5501 36" Bench Seat (Fiberglass)5502 36” Bench Seat Cover (Black)5503 36” Bench Seat Cover (Red)5505 36” Bench Seat Cover (Yellow)

Poly SeatsPolyethylene plastic seats feature hollow, one piece, seamlessconstruction with a molded black non-fade grained surface. Theunique double-walled design delivers a comfortable, impact-absorbing ride. They provide maximum strength and minimumweight with excellent elasticity to resist vibration and shockdamage. Each Poly Seat has molded in 5/16"- 18 threaded insertsfor easy mounting. Each seat has slots for a 5-way harness.

5495 Low Back Bucket Seat (Fiberglass)5492 Low Back Seat Cover (Purple)5496 Low Back Seat Cover (Black)

5485 Universal High Back Seat (Fiberglass) **OVERSIZES**5486 Universal High Back Seat Cover (Black)

7450 Low Back Turbo Pro Poly Seat7457 Low Back Turbo Pro Seat Cover (Black)7463 Low Back Turbo Pro Seat Cover (Purple)

36” Bench SeatThe simple solution for off-road buggy or Baja Bug backseats. Lightly padded Seat Covers fit the 36" Fiberglass Bench Seat.

Low Back Turbo Pro Poly Seat

High Back Turbo Pro Poly Seat7451 High Back Turbo Pro Poly Seat7452 High Back Turbo Pro Seat Cover Black

Low Back Bucket Seat

Universal High Back Seat

Fiberglass SeatsLow cost, easy installation, light weight, and durability!Fiberglass seats allow the driver to sit lower in the car, therebyproviding additional head room in sand buggies and vehicleswith roll cages. Many Pro Stock chassis builders prefer this typeof seat for driver safety and quick removal.

32.75"

19.75"

20.5"9.5" 12.5"

26.5"19.75"

20.5"9.5" 12.5"

23.5"

14"

16.5"

14"

31"

14"

20"

14"

18.75"



Eagle Eye HeadlightHigh Beam, low beam and streetlegal in quartz and brilliant chrome.

The perfect solution for fiberglassdune buggies, custom cars, hot rods,antique cars, trucks and tractors.

Shipped to you with 60/55Wquartz halogen bulb.

6681 Eagle Eye 60/55 Quartz Halogen H-4 Headlight (each)

Dune Buggy Tail LightsThe 4 1/4" diameter, trim thicknessand DOT lenses add up to the bestvalue in dune buggy tail lights. These lights are precision injected fromhigh impact Polyvinyl with a never rustbright chrome plated housing. Cast in baseflanges, 9/16" mounting bolts and rubberwashers hold these beam securely in position.

6663 Billet Buggy Light - 50 Watt 6665 Billet Buggy Light - 85 Watt Bulb

Part# 7651 7652 7653 7654 7655Color Blue Green Purple Red Clear7656 Mini-Compact Single Filament Replacement Bulb

Blue DotsA touch of 50’snostalgia with aset of BLUE DOTS.

Drill your plastictail light lens andslip 'em in.

This is the way it was way back then.

Shipped in sets of two.

7687 Blue Dots

2 1/4” Quartz LightsPowerful, state of the art lightingin a small chrome housing.

A potent 50wt quartz halogenbeam is mounted in a PatendedDichronic multi-faceted reflector.

The chrome housing is mountedon a sturdy adjustable base for easymounting. They are designed aredesigned strictly for off-road use.

7690 2 1/4" Quartz Lights (set of 2)

Part# 7682 7683 7684 7685 7686Color Red Orange Purple Blue Green

Mini-Compact Chrome LightsModern Mini-Compact design iseasy on the eyes, features die castconstruction, and a brilliant custom chromefinish. Perfect for use as parking, clearance,turn signals, or even tail lights.

1 3/4" x 1 1/8" x 1 5/8".

Billet Buggy LightFeatures a chrome finish andan attractive bullet shape.

Uses a 2 1/4"Diameterclear lens.

Sold Individually.

6685 Round Eagle Eye Lights (100w) Black Enamel 5”6686 Round Eagle Eye Lights (100w) Black Enamel 6”6687 Round Eagle Eye Lights (100w) Chrome Plated 5”6688 Round Eagle Eye Lights (100w) Chrome Plated 6”6689 Round Eagle Eye Lights (100w) Stainless Steel 5”6690 Round Eagle Eye Lights (100w) Stainless Steel 6”



Rectangular Eagle Eye Lights - 100wEquipped with rubber mounts anddefused lenses to fill in the gaps.

Eagle Eye gives out the extra coverageyou need in the rough country.

Two sizes are available to fit yourdriving requirements.

6692 Rectangular Eagle Eye Lights (100w) Stainless Steel 8”6693 Rectangular Eagle Eye Lights (100w) Black Enamel 8”6694 Rectangular Eagle Eye Lights (100w) Chrome Plated 9”

Round Eagle Eye Lights - 100wSee what you've been missing with a set of Eagle Eye Off-Road Lights.

Eagle Eye Lights are manufactured for the serious off-road racer.

They are 100% rubber shock mounted, feature a metal B-Xwire loom lead, and a rubber sealed bulb retainer. You canchoose from stainless steel, chrome plated or blackenameled six inch lights with up to 200,000 candle power.Five inch Racing Lights blazing out with 120,000 candlepower are also available in stainless steel, chrome and black enamel.These lights are strictly for off-road use. They are so powerful thatthey are not approved for highway use in any state! This is the sametype of lighting used on aircraft for night landing. Distinctive vinylprotective covers are supplied with each Eagle Eye Racing Light.



Chrome Steering Shaft

The final link between car and driver, this shaft is designed to beused on any chassis or kit car. Long enough for any application,it can be cut to fit any size, Hub allows for a bolt on installationof any custom steering wheel. Made of thick 7/8" diameter tubing

4050 Chrome Steering Shaft

Grant Steering WheelsChrome Three Spoke Designwith Round Holes and BlackFoam Cushion Vinyl grip.

Available in three classicdiameters. Great for Sand Railsand Fiberglass Buggies.

6099 Custom Buggy Steering Shaft Mount

Steering Wheel HubsCNC machined from aluminum stock to giveyour buggy a custom billet look. Bolts right onto 3 bolt dune buggy steering shafts to facilitateinstallation of all Wolfsburg steering wheels.

The #6228 bolts to the Quick Release Steering Hub toprovide for the installation of a Wolfsburg series steering wheel. 6220 Steering Wheel Hubs - Billet Steering Wheel Adapter - Adapter and Emblem kit6221 Steering Wheel Hubs - Bilet Emblem 6227 Steering Wheel Hubs - Billet Steering Wheel Adapter - Adapter Only6228 Steering Wheel Hubs - Quick Release Billet Adapter4771 Quick Release Steering Wheel Hub (includes hex stub shaft)

4780 Steering Wheel - 10'' Super Deep Classic (5 1/2” dish) 4781 Steering Wheel - 11 1/2'' Classic (3 3/4” dish)4782 Steering Wheel - 13 1/2'' Super Classic (2” dish)

Buggy Steering Shaft MountHere's the firstgood lookingsteering shaftmount availablefor dune buggies.

It's manufactured from top quality,cast aluminum, and features a self lubricating bushing.The textured surface has the appearance of an expensivesports car dash. The face plate has plenty of room for astarter button and switch.

4771

62276220 6228

7472

7470

7471



Aluminum Gauge ConsolesProvides fast installation and lasting protection for your switches and gauges.Each instrument box is manufactured from sturdy .060” aluminum with acustom brushed surface. A 2" glare shield provides added protection forswitches and gauges. The larger enclosures measures 9 1/2" W x 3" T x 3 x W.

The instrument openings measure 2 1/8" and accept VDO COCKPIT gauges.Two 3/4" holes are provided for your cars ignition switch and warning light.Four toggle switch holes allow you quickly to wire it up and get it on the dunes.

6094 Pedal Assembly - VW Sedan6095 Pedal Ass. Repair Kit - fits Sedans & Squarebacks (to ‘65)6102 Pedal Ass. Repair Kit - Sedans & Squarebacks (’66-on) 6093 Roller Pedal - Black

Tach BagKeeps sand and moistureout of your Five InchTachometer. Just slip itover your Tach andtighten the drawstrings.

Features a durable waterproof "see through" plastic lens thatprovides you with clear vision of the Tach face. The Tach Bag isthe best way to assure all weather protection for your expensivemonster Tach.

Part# 3780 3781 3782 3783Color Red Blue Yellow Black

Universal Throttle CableOne cable does the job.It's manufactured frommulti-strand super flex steelto provide smoother, precise throttleaction. It fits every air cooled VW ever made,and a lot of water cooled ones too!

It will out last the more rigid VW cable many times. You canupdate an early stiff wire cable with the new Super Flex Cableor replace a worn or broken Sedan, Buggy, Bus or Squarebackcable. Measures 15 1/2 feet.

6096 Universal Throttle Cable

7470 Aluminum Gauge Console - Large w/holes7471 Aluminum Gauge Console - No holes7472 Aluminum Gauge Console - Small

Roller PedalThe early styleVW pedalworks greatin all types ofdune buggiesand race cars.

The large roller helps smooth out throttle movement in the roughstuff. It can be used to replace standard throttle pedals in stocksedans or in pedal mount assemblies installed in off-road racecars or dune buggies.

VW Sedan Pedal AssemblyReplace your worn and cracked clutch,brake and gas pedal parts with a brand"NEW" O.E.M. assembly.

Now featuring a grease Zerk.



DZUS ButtonsNEEDS DESCRIPTION.

5680 DZUS Style Fastener Button5681 DZUS Style Mounting Tab with Spring Clip Attached5682 DZUS Button Removal Tool

Baja Bug Hood Tie DownsSnap on-snap off.Manufactured fromspecially compoundedrubber to hold your hoodfirmly in position. Steel hingeand mounting hardware is cadplated to prevent rust and corrosion.

Easy to install and can be used on all Baja Bug Front Ends.

6595 Weld In Brackets - Flat (set of 4)6596 Weld In Brackets - Formed (set of 4)1964 Chrome Push Rod Tube Protectors (one pair)

Drip Rail Mount MirrorDesigned to be mounted onthe Drip Rail of cars and canbe adapted to many otherapplications.

Mounting hardwareincluded.

Universal left or right mount.

6072 4” Stainless Steel Drip Rail Mount Mirror (aka Peep Mirror)

Off Road Side Mount MirrorDesigned for Off Road carstraveling through thick brushand trees.

The 5 Inch Stainless backedmirror is protected by a 3/4"Stainless tube surround welded to a 1 1/2" half round. Can be held in place by two stainless hose clamps or drilled andbolted in place. For use on 1 1/2" tubing.

6070 Off Road Side Mount Mirror - 5" Diameter Universal

6134 Baja Bug Hood Tie Downs

Chrome Push Rod Tube ProtectorsProtect your push rod tubes andadd luster to your engine.

Made from heavygauge steel andthen chrome plated.

Easy to install and designed to fit allT-1 engines. Sold in sets to fit one engine.

Weld In BracketsHeavy gauge steel brackets packagedin sets of four. Weld them on tomount lights, seat belts, or anyother number of accessories.The Formed Brackets wraparound the frame to providethe strongest type of mount.These mounts are ideal foruse on dune buggies, racecars, and sedans.

The mounts havea pre-drilled

1/2" hole.

the sand center - off road parts pdf - cbperformance.netcbperformance.net/pdf/cb performance - the...

Documents