cnc grinders • cnc turning & machining...
TRANSCRIPT
OKUMA #LT-200-M "6-Axis" Turning Center Mazak # MTV-414-22 CNC Vertical Machining Center
ONLINE CNC MACHINERY, TOOLROOM,FORKLIFTS & PLANT SUPPORT AUCTIONCNC GRINDERS • CNC TURNING & MACHINING
CENTERS • FORKLIFTS • GENERATOR
Edgetek “Super Abrasive 5-Axis” CNC Grinders
Surplus Consigned from Major Aerospace & Other Manufacturers
(Various Locations: See Online Lot Catalog For Locations)
SALE DATE: TUESDAY, AUGUST 4th 1:00 PM (ET)INSPECTION: BY APPOINTMENT ONLY
Belmont "Maxicut" EDM Machine
New 2001/1997
MINSTER # 7 Punch Press
New 1998
New 2004
New 2006
1 of 2
1 of 8
Milling 1 of 5
Several Presses Available
100 Amp
Sale under Management of:Thomas Industries, Inc.
2414 Boston Post Road, Guilford, CT 06437-2310 Phone (203) 458-0709 • Fax (203) 458-0727
email: [email protected] www.thomasauction.com
ONLINE AUCTION – REGISTER & BID AT WWW.THOMASAUCTION.COM2
INSPECTIONS - CALL TOM DECOSMO, JR. - (413) 530-0019 OR EMAIL [email protected]
SHARP 3 HP TOOL-ROOM MILL
MATSUURA 760V-DC "Twin Spindle" CNC VerticalMachining Center
CNC GRINDERS(2) Edgetek “Super Abrasive
5-Axis” Cnc Grinders (New2001 & 1997)
Schutte # WU-405 “5-Axis”Tool & Cutter Grinder (New1999)
CNC LATHESOkuma #LT-200-M "6-Axis"
(New 2004)Mori-Seiki # SL-25B
(Fanuc Control)YCM-Supermax # TC-2
GENERATORGenerac Power Systems
Guardian Elite 80KWGenerator (New 2007)
Edgetek “Super Abrasive 5-Axis” Cnc Grinders
Mori-Seiki # SL-25B CNC Turning Center
Blanchard #18-36 Rotary Type Vertical GrinderMazak # MTV-414 CNC Vertical Machining Center
Belmont "Maxicut" EDMMachine
Schutte # WU-405 “5-Axis” Tool & Cutter Grinder
1 of 2
New 2001/1997
Built In CoolantSystem
New 1999
New 1999
Fanuc Control
New 1992
New 2006
Fanuc 11M CNCControl
See LotCatalog forLocationsTHIS BROCHURE IS A PARTIAL LISTING.
COMPLETE LOT CATALOG & PHOTOS AT
www.ThomasAuction.com
CNC MACHINING CENTERS Mazak # MTV-414-22 CNC Vertical
Machining Center (New 1998)Mazak # MTV-414 CNC Vertical
Machining Center (New 1992)Okuma # MX-45VAE CNC Vertical
Machining Center (New 1998)Okuma # MX-45 CNC Vertical Machining
Center (New 1998)Okuma # MC-5VA CNC Vertical
Machining CenterMonarch # VMC-150B CNC Vertical
Machining Center (New 1994)Matsuura # 760-DC “Twin Spindle” CNC
Vertical Machining CenterKuraki # KH-50 CNC Horizontal Machining
CenterMori-Seiki #MV-40 CNC VMCMori-Seiki #MV40-45V CNC VMCEXCEL # PMC-5T18 CNC VMC
CNC MILLERS & H.D.MILLERS
Cincinnati “3-Axis” CNC #750-20 Verci-Power,Retrofitted by Boeing, ABControl
Cincinnati # 330-18 Verci-Power Horizontal Bed-TypeMiller w/ Vertical head
Cincinnati # Cinova 80-205-12, Universal HorizontalMiller
VERTICAL TURRET LATHESBullard 46” Dynatrol VTL w/
Sony DRO
GUN DRILLDeHoff “Knee-Type” Gun Drill,
2” x 24” Capacity
LARGE SELECTION Of PLANT SUPPORT, fORKLIfTS & CRANE 3
VARIOUS LOCATIONS: SEE LOT CATALOG FOR LOCATIONS
MILLING MACHINESAcra 5 HP “Knee Type” Vertical Miller W/ Anilam CNC
ControlBridgeport Series 1, 2 HP Vertical Miller W/ DROBridgeport 1 HP Vertical Miller W/ DROAlliant # RT-2 Vertical 2 HP Miller W/ DROVectrax # GS-20V Vertical Miller W/ DRO & PFSharp 3 HP Knee Miller (Base Mounted) (New 1999)MSC 2HP Vertical Miller, 9” x 49” Table, w/ DRO & PFYCI-Supermax # YC-1.5VS, 3-HP Vertical Miller
GRINDERS-VERTICALBlanchard #18-36 Rotary Type Vertical Grinder
PUNCH PRESSES & PRESS EQUIPMENTRavne # UHS-150 S.S.D.C. Press, 150 TonAida # PC-15(2) Power Punch Press, 150 TonFederal 45 Ton Punch Press, 45 TonPerkins #550-B Punch Press, 45 Ton Minster # 7 OBI Punch Press, 75 TonBliss # 28 1/2 OBI Punch Press, 125 TonBliss # 6100 S.S.D.C. Power Press, AC-ABBliss # 23 OBI Punch Press, 75 Ton(3) Bruderer “Precision” Straightener-Leveler FeedsLittell #626 Coil Cradle/StraightenerRowe #B20-04000 Coil Cradle/Straightener
Okuma # MX-45VAE CNC VerticalMachining Center
Kuraki # KBM-11X CNC Horizontal Boring/Milling Machine
Bullard 46” Dynatrol VTL w/ Sony DRO
Vectrax # GS-20V Vertical Miller Acra 5 HP “Knee Type” Vertical Miller
EXCEL # PMC-5T18 CNC Vertical Machining Center
Bridgeport Series 1, 2 HP Vertical MillerW/ DRO
Stainless Steel Tank, 1800 Gallon, 6ft X 10ft
Bruderer Straightner-Leveler Sunnen # MBB-1660 Hone Tennant Floor Scrubber Model # 5680
1 of 2
Fanuc Control
CNC Control
New 1998
1 of 3
DRO
DRO
New 2003
Late Model
Late Model
Power Stroker
Low Hours
New 2005
Low Hours
ONLINE AUCTION ONLY – BID AT WWW.THOMASAUCTION.COM4
SALE DATE: TUESDAY, AUGUST 4th 1:00 PM (ET)
EDMBelmont Technologies “Sinker-
Type” EDM, 100 Amp (New 2006)
ELOX “Sinker-Type” EDM, 100 Amp(New 1986)
LATHESLeblond 26”x 96” “Regal Servo
Shift” Engine LatheLeblond 13”x 30” “Regal” Engine
Lathe W/ Turret Hardinge # DV-59 Secondary
Lathe Mazak “Gap Bed” Engine Lathe,
14”/19” x 40” (New 1978)TOS-Trencin “Gap Bed” Engine
Lathe, 19”/27” x 78” (New 1995)(2) South Bend “Toolroom Type”
13” x 28” Lathes (Late)
FORKLIFTS & CRANEHyster # H-210XL Forklift w/ 20,000
Capacity (New 2000)Hyster # H-250 Forklift w/ 25,000 lb.
CapacityGrove CraneClark Electric Forklift Model #TM
15S w/ Charger Snorkel # SL-20 Scissor Lift(5) Ecoa Hyd. “Pallet Type” Zero
Lift Tables (New 2010 Unused)
THIS BROCHURE IS A PARTIAL LISTING. COMPLETE LOT CATALOG & PHOTOS AT
www.ThomasAuction.com
DISCLAIMER: Auctioneer is notresponsible for descriptive errors cover-ing specifications, impression counts ormodels of assets offered at this auction,additions or deletions. Items offered
may not necessarily be sold asdescribed and/or photographed.
Buyers should verify all aspects of theirpotential purchases during inspectionas all items offered will be sold “as is,
where is” with all faults.
Please check with the auctioneer’soffice for additions or deletions.
Ravne # UHS-150 S.S.D.C. Press, 150 TonClark Electric Forklift Model #TM 15S
Snorkel # SL-20 Scissor Lift
RUSH DRILL GRINDER
Leblond 13”x 30” “Regal” Engine Lathe
ECOA Hyd. Pallet Type Zero Lift Tables WATER COOLED TRANSFORMERStokes Model 212-11 Vacuum Pump
Lepel Induction Heater
1 of 2
1 of 5
1 of 5
New 2010
Charger Included
Several Sizes
HYSTER # H-210XL "All Terrain" FORKLIFT
COMPLETE LOT CATALOG, REGISTRATION & BIDDING AT WWW.THOMASAUCTION.COM
INSPECTION: BY APPOINTMENT ONLY
5
ONLINE AUCTIONONLINE CNC MACHINERY, TOOLROOM, FORKLIFTS & PLANT SUPPORT AUCTIONCNC GRINDERS – CNCMACHINING CENTERS –FORKLIFTS – GENERATORSurplus Consigned from MajorAerospace & other Mfg.(Various Locations: See Lot Catalog for Locations)
SALE DATE: TUESDAY, AUGUST 4th 1:00 PM (ET)
INSPECTION: BY APPOINTMENT ONLYBuyer's Premium: 15%
Registration: Register and bid at www.thomasauction.com
Payment Due In Full: Thursday, August 6, 2015Removal: All items must be removed by Fri., August
21, 2015Staggered Closing Times: Lots Have 60-Second
Staggered Closing Times.Auto Extend Bidding: If a bid is submitted with less
than 3-minutes remaining, the closing time for thatlot will be extended by 3-minutes.
Payment Types: Certified Check or Wire TransferDisclaimer: Auctioneer is not responsible for errors,
omissions, additions or deletions. Items offered maynot necessarily be sold as described and/or pho-tographed. Buyers should verify all aspects of theirpotential purchases during inspection as all itemsoffered will be sold “as is, where is” with all faults.Please check with the auctioneer’s office for addi-tions or deletions.
THOMAS INDUSTRIES 2414 Boston Post Road Guilford, CT 06437-2310
(203) 458-0709 • (203) 458-0727 Faxwww.thomasauction.com
Under Management of:
ALSO OFFERINGSeiko # SECPER 12 Tapping
MachineBewo Power “Cold Type” Chop
Saw W/ ViseMoore Jig Borer #2 W/ Sony DroMoore #1 Jig BoreB&S # 618 “Micro-master” Hyd.
Surface GrinderNorton 6”X18” Surface Grinder SMW # 65-FS “Omni-Bar” Bar Feed
UnitRhino-Bar Bar Feed UnitLNS “Hydro-Bar” Bar Feed, Model
6.32-HS-5.2
Ikura-Seiki Bartop LUB12-II Mag.Bar Feed for Citizen B-12 SwissTurn (New 2004)
Tennant Floor Scrubber Model #5680
Sunnen # MBB-1660 Hone w/Power Stroking
Ruemelin 60” Hood Type BlastCabinet
Ingersoll-Rand 100-HP RotaryScrew Air Comp (New 1995)
Doall Horizontal Band Saw,(Approx. 12” x 12” capacity)
Marvel # 13A Horizontal Band Saw,13” x 13” Cap (New 1981)
(5) ECOA Hyd. Pallet Type Zero LiftTables (New 2010)
Interlake Power Box StitcherStainless Steel Tank, 1800 Gallon,
6ft X 10ftGanro “Trunnion” Type CNC
Rotary TableHelmel #Checkmaster Coordinate
Measuring Machine # 338-251Stokes Model 212-11 Vacuum
Pump With Intensifying Unit(2) Lepel Induction HeatersCustom SS Ultrasonic Filtration UnitAllen 4-Spindle Super-Speed Drill
Press, 3/8” Cap
TECHNICAL INFORMATION & INSPECTIONSTom DeCosmo, Jr. (413) 530-0019
PAYMENT INFORMATIONIrina Lekhmus (203) 458-0709 X108
New 2000
Grove # IND-68 "Carry Deck" Industrial Crane HYSTER # H-250 FORKLIFT
AUCTION ITEM LOCATION INFORMATION AT WWW.THOMASAUCTION.COM
Diesel Powered
25,000 lb. Capacity
20,000 lb. Capacity
Diesel Powered
Propane Powered
12 Ton Capacity
FORWARDING SERVICE REQUESTED
PRESORTED FIRSTCLASS MAILU.S. POSTAGE
PAIDPermit No. 80Milford, CT
THOMAS INDUSTRIES 2414 Boston Post RoadGuilford, CT 06437-2310
(203) 458-0709 • (203) 458-0727 Faxhttp://www.thomasauction.com
Under Management of:
ONLINE AUCTIONSurplus Consigned from Major Aerospace & Other Manufacturers(Various Locations: See Lot Catalog for Locations)
AUCTION DATE: TUESDAY, AUGUST 4TH 1:00 PM (ET)INSPECTION: BY APPOINTMENT ONLY
CNC GRINDERS • CNC MACHINING CENTERS • FORKLIFTS • GENERATOR Surplus Consigned from
Major Aerospace & Other Manufacturers(Various Locations: See Lot Catalog for Locations)
SALE DATE: TUESDAY, AUGUST 4th 1:00 PM (ET)INSPECTION: BY APPOINTMENT ONLY
ONLINE CNC MACHINERY, TOOLROOM,FORKLIFTS & PLANT SUPPORT AUCTION
YCM Supermax # TC-2 CNC LatheBlanchard #18-36 Rotary Type
Vertical GrinderTsugami # BO-205-II CNC Swiss Type
w/Magazine Bar Feed
New 1990
FANUC OM CNC
New 2012