A B C

PanelMate®Hurricane Protection Anchoring System

Product Description:PanelMate®, the original "direct mounting" anchoring system isthe fast and easy way to install hurricane panels to concrete,block or wood and reduce installation costs! Available in fivedifferent designs- Pro, Plus, Male, Female, and TVAS. Whenused with approved systems this product meets Miami-DadeCounty Hurricane Standards PA201-94, PA202-94, and PA203-94. All carbon steel designs feature silver Stalgard® corrosionresistant finish that withstands 800 hours in salt spray testingper ASTM B117 standards, and Plus and TVAS is available instainless steel. Special "V" notched #14 diameter threads (.270"OD) provide exceptional pullout and shear values. Be prepared!Hurricanes can strike the United States coastline from Texas toMaine.

Advantages:

Pro Fasteners

ELC ENX320 PanelMate Pro 225 5/8" 2-1/4" 100

ELC ENX322 PanelMate Pro 225LS 7/8" 2-1/4" 100

ELC ENX325 PanelMate Pro 275 5/8" 2-3/4" 100

ELC ENX328 PanelMate Pro 325 5/8" 3-1/4 100

4 designs to handle different application requirements.2 stud lengths and 3 fastener lengths. Just "drill and drive". 1/4"-20 external threads.

Plus Fasteners

Fasten storm panels to concrete or wood structures, includingstucco-faced buildings. Not to be used in block. External threadsaccept 1/4-20 wing nuts.ELC ENX380 Silver Stalgard® 5/8" 2-1/4" 100ELC ENX383 White Stalgard® 5/8" 2-1/4" 100ELC ENX400 Stainless Steel 5/8" 2-1/4" 100

• Eliminates expensive, unsightly and labor-intensive installations of costly aluminum headers, tracks, and mounting channels with machine screw anchors.

• A fraction of the installed cost of other more complicated panel anchoring systems.

• Mechanical link between threads and structure provide secure, long term anchoring.

• This is a "system" where all the parts are available from one manufacturer and seamlessly integrate with one another.

ELC ENX330 TVAS CS 5/8" 7-3/8" 2-1/8" Steel 50ELC ENX430 TVAS SS 5/8" 7-3/8" 2-1/8" Stainless 50

ITEM DESCRIPTION "A" "B" "C" MATERIAL BOXCODE QTY.

THE

Product LineProduct Line

14B

FASTENERSTo Order Please Call: 800 456-2658 Fax: 888 434-3215 718 434-4500 Fax: 718 434-3215 To Order On-Line: www.tannerbolt.com

CONSTRUCTION

ITEM DESCRIPTION “A” STUD THREAD “B” FASTENER BOXCODE LENGTH LENGTH QTY.

Installation Accessories

ELC ENY156 Special Heavy Duty Modified 3/16" Drive Socket 1ELC ENY175 1/4"-20 Washered Wing Nut 50ELC ENY180 White Caps 50

ITEM DESCRIPTION BOXCODE QTY.

ELC ENY156

ELC ENY175

ELC ENY180

• Drivers are packaged individually.

A B

TVAS (Through Veneer Anchoring System)

The first anchoring system designed for attaching hurricane panelsthrough brick veneer to the building’s structural materials.Available in either 302 stainless steel or carbon steel with SilverStalgard®. 1/4"-20 threaded stud. Special 3/16" hex drive.

CP Construction11/05xp 11/27/06 9:43 AM Page 14

Installation Tools

3/8" hex driveThe original "studded" designUse PMD-1 combo bit to countersink. 1/4-20 threaded stud.ELC ENX200 PanelMate 225 5/8" 2-1/4" 100

Female Fasteners

Internal 1/4"-20 threadsYellow nylon locking patch.Use PMD-1 combo bit to countersink.ELC ENX300 PanelMate Female 1/2" 2-1/4" 100

PanelMate®Hurricane Protection Anchoring System

1/2" diameter for high performance. Accepts multiple lengths of 1/4"-20 fasteners. Installs using 7/16" masonry drill bit.5/16"internal hex drive. Nylon locking patch (long only) to resist loosening.

Insert

ELC ENX305 PanelMate Long 2-1/8" 50ELC ENX310 PanelMate Short 1-3/8" 50

Installation: Male & Female Models

Elco® PanelMate® anchors install faster andeasier than any other storm protectionanchoring products. For concrete andconcrete block applications, just drill anddrive- it’s that simple! In wood base materials,predrilling is not required!Full thread engagement in concrete, concrete block and wood base materials is required for optimum performance. Therefore, stucco-faced surfaces will typically require countersinking so that the top of the hex heads of the installed PanelMate® anchorsset flush to the stucco surface, allowing for full threadengagement in the base material.Use Elco® PMD-1 combination bit to drill and countersink inone easy operation. Countersinking will also be necessary inunfaced applications where flush, surface mountings aredesired. For ease in attaching panels, male PanelMate®

anchors should be installed above openings. FemalePanelMate® anchors should be used where flush, non-protruding installations are desired, such as below openings.

Female counter-sinkingposition

Male and Female in correct countesunk setting

Male Fasteners

Installation Tools:

THE CONSTRUCTION FASTENERS

4302 Glenwood Rd. Brooklyn, NY 11210 800 456-2658 Fax: 888 434-3215

718 434-4500 Fax: 718 434-3215 www.tannerbolt.com

Product LineProduct Line

15B

Hex drive tool

Hex adaptor tool

ITEM DESCRIPTION “A” STUD THREAD “B” FASTENER BOXCODE LENGTH LENGTH QTY.

ITEM DESCRIPTION BOXCODE QTY.

ELC ENY110 Combination Tool drills and countersinks in 1one operation. Adjusts for use with male or female PanelMate anchors.

ELC ENY105 Hex Drive Tool automatically sets male and 1female anchors. PanelMate anchors flush to work surface.

ELC ENY120 Quick change adapter permits fast changeover 1of PMD-1 and NY105 tools.

ELC ENY110

ELC ENY105

ELC ENY120

ITEM DESCRIPTION INSERT BOX CODE LENGTH QTY.

Male counter-sinkingposition

A B

CP Construction12/14.xp 12/15/06 1:12 PM Page 15