the original manufacturer of tentsuki dump hoist. t · pdf filetentsuki type (krm & kr)...
TRANSCRIPT
TIPPING GEARTENTSUKI TYPE (KRM & KR) series
Hydraulic-driven Diagramamamramramg
"TENTSUKI" is a registered trademark of ShinMaywa Industries,Ltd., Japan.
TENTSUKI TYPE CONVENTIONAL TYPE
Pipe
Sub-FrameOil Reservoir
Body Hinge
Dump Lever
Lift ArmTension Link Hoist Cylinder
Control Cable
P.T.O.Drive Shaft
Hydraulic Pump
Hydraulic Hose
Dump Lever
Control Cable
P.T.O.Drive Shaft
Oil Reservoir
Hoist CylinderPipe
Trunnion Bracket
Hydraulic Hose
Hydraulic Pump
Tension Link
Body Bracket
Lift Arm
Body Hinge
The original manufacturer of "TENTSUKI" dump hoist.
Japanese quality, developed and tested in Japan.
Used in all over the world
TIS (Thai Industrilal Standard) certified: KRM-201, KRM-143C
Thai ShinMaywa has been manufacturing "TENTSUKI" hoists for Japan for more than 25 years.
TTTTTTT
JJJJJJJ
TTTTTTT
TTTTTTTShinMaywa is widely known as the original manufacturer of "TENTSUKI" dump hoist.
ShinMaywa is widely known as the original manufacturer of "TENTSUKI" dump hoist.
Proven Quality
http://www.shinmaywa.co.jp Printed on recycled paper.,15. 9 Z-T003 Printed in Japan3.1
Specifications and dimensions are subject to change without notice.
ShinMaywa Industries, Ltd.International Sales Dept.Special Purpose Truck Div.
3-2-43, Shitte, Tsurumi-ku, Yokohama, 230-0003, JapanTelephone : +81-45-575-5163 Facsimile : +81-45-575-9837e-mail : [email protected]
ShinMaywa (Asia) Pte. Ltd.8 Burn Road, #14-10 TrivexSingapore 369977Telephone : +65-6224-0728Facsimile : +65-6224-9678e-mail : [email protected]
Thai ShinMaywa Co., Ltd.No.199, Moo 12, Soi Daramitr (Petchkasem 120),Petchkasem Road, Om-noi, Krathumbaen, Samutsakorn 74130 ThailandTelephone : +66-2-420-4712Facsimile : +66-2-420-9863e-mail : [email protected]
ShinMaywa is a leading manufacturer of special-purpose trucks in Japan. “TIPPING GEAR” is easy to assemble and mount on your truck chassis.
27,00016,000
Designed MaximumLifting Capacity(kg)
8,500
TENTSUKI TYPE
1. The values(capacities)above have been calculated assuming an average hydraulic pressure of 17.6MPa(180kgf/cm2).2. Hoist capacity will vary depending upon dimensions, ℓ and T.3. Capacities indicated “kg” include body and maximum playload.4. The capacities above are based on the assumption that the center of gravity is at the midpoint of the body.5. The above conditions and capacities apply only to rigid single-body trucks. For trailer mounting,separate values are necessary.
Notes
CONVENTIONAL TYPE
Hoist Mounting and Maximum Lifting Capacityi Lif i C ia im m Lifting Capacitaximum Lifting Capacityaximum Lifting CapacityMaximum Lifting Capacityg p y
Hoist Mechanism, Dimensions and Mass(approx.)
Hoist Cylinder and Pump Combination Specifications(approx.)
TENTSUKI TYPE
CONVENTIONAL TYPE
KRM-201
RecommendedTruck
G.V.W.(kg)
KRM-201(S50)25,000 to 32,000
KRM-203KRM-204
32,000 to 38,00028,000 to 35,000
KRM-184BKKRM-174
21,000 to 28,00011,000 to 17,000
KRM-143C 6,000 to 9,000
RatedLifting
Capacity(kg)
16,000 to 18,000
20,000 to 29,00018,000 to 20,00015,000 to 17,0006,000 to 8,0004,000 to 5,000
BodyLengthL(mm)
6,0007,0008,0008,0005,3004,5003,400
RearOverhangR(mm)
9008001,2001,000900750400
2,1002,7002,8003,0001,7501,5001,300
Trunnionto HingeT(mm)
2,6302,7803,6303,3802,4802,0301,100
29,00024,000(44°)39,000(47°)26,000(48°)
ModelLoadCenterto Hingeℓ(mm) 53° 55° 60°50°
Designed MaximumLifting Capacity(kg)
5,000
RecommendedTruck
G.V.W.(kg)
KR-123B 4,000 to 5,500
RatedLifting
Capacity(kg)
2,000 to 3,000
BodyLengthL(mm)
3,100
RearOverhangR(mm)
340 1,210
Trunnionto HingeT(mm)
1,270
ModelLoadCenterto Hingeℓ(mm) 53° 55° 60°50°
STANDARD PARTSA-1 Cylinder Ass′yA-2 Lift ArmA-3 Tension Link
A-4 Trunnion BracketA-5 Body Bracket
B Cylinder Support Ass′yC Hydraulic PumpD Hydraulic Hoses
E Oil ReservoirF Body Hinge Ass′y
G Drive Shaft
H Control Cable
I Piping Ass′y
J Dump Lever
KRM-201 / (S50)KRM-201 / (S50) KRM-203 /204KRM-203 /204 KRM-184BKKRM-184BK KRM-174KRM-174 KRM-143CKRM-143C KR-123BKR-123BG.V.W 25,000 to 32,000kg
KRM-203:G.V.W 32,000 to 38,000kgKRM-204:G.V.W 28,000 to 35,000kg
G.V.W 21,000 to 28,000kg
G.V.W 11,000 to 17,000kg
G.V.W 6,000 to 9,000kg
G.V.W 4,000 to 5,500kg
LWHXMass
mmmmmmmmkg
KRM-203KRM-201(S50) KRM-204
2,230590510480450
2,430590700480520
1,765590470480370
KRM-174KRM-184BK KRM-143C
1,045415395380120
1,565500420480250
1,765590470480320
KR-123B
89539531554085
Model
Working Pressure
Inner Diameter
Stroke
MPakgf/cm2
mm
mm
KRM-203KRM-201(S50) KRM-204
13.5138200
1,192
10.8110200
1,414
10.3105200931
881(S50)
KRM-174KRM-184BK KRM-143C
5.960140
510
6.970175
755
11.8120188
931
KR-123B
6.970120
430
Retracted Cylinder Length(mm Eye to Eye)Piston Rod Diameter
Standard Rotational SpeedDischarge Volume
mm
mm
rpmmL/rev
1,533
φ90
1,752
φ90
1,269
φ90
1,000129.9
803
φ50
44.6
1,115
φ70
77.9
1,269
φ70
638
φ50
22.3
Maximum Testing Pressure
Mass
MPakgf/cm2
kg
20.621030
13.714012
20.621028
15.71608.5
Model
HoistCylinder
KPA-1302, KPA-1307, KPA-1308(Clockwise Rotation) KPA-80 KPC-45 KPC-2231Model
HydraulicPump
L
X
H
W
OPTIONAL PARTS
Load
Center
T R
L
ℓ
Hinge
Trunnion
L
ℓ
T RHinge
Trunnion
Load
Center
G Drive Shaft
H Contro
KRM-201(S50) : 50mm short stroke version. KRM-203 : For semi-trailers only.
A-5
A-2
A-1A-3
A-4
B
D
CF
E
A-5
A-2
A-1A-3
A-4
B
D
CF
E
A-5 A-5
A-2
A-1A-3
A-4
B
D
CF
E
A-2
A-1
A-3
A-4
B
D
CF
E
A-5
A-2
A-1
A-3
A-4
B
D
CF
E
A-5
A-2
A-1 A-3
A-4
D
C
F
E
ShinMaywa is a leading manufacturer of special-purpose trucks in Japan. “TIPPING GEAR” is easy to assemble and mount on your truck chassis.
27,00016,000
Designed MaximumLifting Capacity(kg)
8,500
TENTSUKI TYPE
1. The values(capacities)above have been calculated assuming an average hydraulic pressure of 17.6MPa(180kgf/cm2).2. Hoist capacity will vary depending upon dimensions, ℓ and T.3. Capacities indicated “kg” include body and maximum playload.4. The capacities above are based on the assumption that the center of gravity is at the midpoint of the body.5. The above conditions and capacities apply only to rigid single-body trucks. For trailer mounting,separate values are necessary.
Notes
CONVENTIONAL TYPE
Hoist Mounting and Maximum Lifting Capacityi Lif i C ia im m Lifting Capacitaximum Lifting Capacityaximum Lifting CapacityMaximum Lifting Capacityg p y
Hoist Mechanism, Dimensions and Mass(approx.)
Hoist Cylinder and Pump Combination Specifications(approx.)
TENTSUKI TYPE
CONVENTIONAL TYPE
KRM-201
RecommendedTruck
G.V.W.(kg)
KRM-201(S50)25,000 to 32,000
KRM-203KRM-204
32,000 to 38,00028,000 to 35,000
KRM-184BKKRM-174
21,000 to 28,00011,000 to 17,000
KRM-143C 6,000 to 9,000
RatedLifting
Capacity(kg)
16,000 to 18,000
20,000 to 29,00018,000 to 20,00015,000 to 17,0006,000 to 8,0004,000 to 5,000
BodyLengthL(mm)
6,0007,0008,0008,0005,3004,5003,400
RearOverhangR(mm)
9008001,2001,000900750400
2,1002,7002,8003,0001,7501,5001,300
Trunnionto HingeT(mm)
2,6302,7803,6303,3802,4802,0301,100
29,00024,000(44°)39,000(47°)26,000(48°)
ModelLoadCenterto Hingeℓ(mm) 53° 55° 60°50°
Designed MaximumLifting Capacity(kg)
5,000
RecommendedTruck
G.V.W.(kg)
KR-123B 4,000 to 5,500
RatedLifting
Capacity(kg)
2,000 to 3,000
BodyLengthL(mm)
3,100
RearOverhangR(mm)
340 1,210
Trunnionto HingeT(mm)
1,270
ModelLoadCenterto Hingeℓ(mm) 53° 55° 60°50°
STANDARD PARTSA-1 Cylinder Ass′yA-2 Lift ArmA-3 Tension Link
A-4 Trunnion BracketA-5 Body Bracket
B Cylinder Support Ass′yC Hydraulic PumpD Hydraulic Hoses
E Oil ReservoirF Body Hinge Ass′y
G Drive Shaft
H Control Cable
I Piping Ass′y
J Dump Lever
KRM-201 / (S50)KRM-201 / (S50) KRM-203 /204KRM-203 /204 KRM-184BKKRM-184BK KRM-174KRM-174 KRM-143CKRM-143C KR-123BKR-123BG.V.W 25,000 to 32,000kg
KRM-203:G.V.W 32,000 to 38,000kgKRM-204:G.V.W 28,000 to 35,000kg
G.V.W 21,000 to 28,000kg
G.V.W 11,000 to 17,000kg
G.V.W 6,000 to 9,000kg
G.V.W 4,000 to 5,500kg
LWHXMass
mmmmmmmmkg
KRM-203KRM-201(S50) KRM-204
2,230590510480450
2,430590700480520
1,765590470480370
KRM-174KRM-184BK KRM-143C
1,045415395380120
1,565500420480250
1,765590470480320
KR-123B
89539531554085
Model
Working Pressure
Inner Diameter
Stroke
MPakgf/cm2
mm
mm
KRM-203KRM-201(S50) KRM-204
13.5138200
1,192
10.8110200
1,414
10.3105200931
881(S50)
KRM-174KRM-184BK KRM-143C
5.960140
510
6.970175
755
11.8120188
931
KR-123B
6.970120
430
Retracted Cylinder Length(mm Eye to Eye)Piston Rod Diameter
Standard Rotational SpeedDischarge Volume
mm
mm
rpmmL/rev
1,533
φ90
1,752
φ90
1,269
φ90
1,000129.9
803
φ50
44.6
1,115
φ70
77.9
1,269
φ70
638
φ50
22.3
Maximum Testing Pressure
Mass
MPakgf/cm2
kg
20.621030
13.714012
20.621028
15.71608.5
Model
HoistCylinder
KPA-1302, KPA-1307, KPA-1308(Clockwise Rotation) KPA-80 KPC-45 KPC-2231Model
HydraulicPump
L
X
H
W
OPTIONAL PARTS
Load
Center
T R
L
ℓ
Hinge
Trunnion
L
ℓ
T RHinge
Trunnion
Load
Center
G Drive Shaft
H Contro
KRM-201(S50) : 50mm short stroke version. KRM-203 : For semi-trailers only.
A-5
A-2
A-1A-3
A-4
B
D
CF
E
A-5
A-2
A-1A-3
A-4
B
D
CF
E
A-5 A-5
A-2
A-1A-3
A-4
B
D
CF
E
A-2
A-1
A-3
A-4
B
D
CF
E
A-5
A-2
A-1
A-3
A-4
B
D
CF
E
A-5
A-2
A-1 A-3
A-4
D
C
F
E
TIPPING GEARTENTSUKI TYPE (KRM & KR) series
Hydraulic-driven Diagramamamramramg
"TENTSUKI" is a registered trademark of ShinMaywa Industries,Ltd., Japan.
TENTSUKI TYPE CONVENTIONAL TYPE
Pipe
Sub-FrameOil Reservoir
Body Hinge
Dump Lever
Lift ArmTension Link Hoist Cylinder
Control Cable
P.T.O.Drive Shaft
Hydraulic Pump
Hydraulic Hose
Dump Lever
Control Cable
P.T.O.Drive Shaft
Oil Reservoir
Hoist CylinderPipe
Trunnion Bracket
Hydraulic Hose
Hydraulic Pump
Tension Link
Body Bracket
Lift Arm
Body Hinge
The original manufacturer of "TENTSUKI" dump hoist.
Japanese quality, developed and tested in Japan.
Used in all over the world
TIS (Thai Industrilal Standard) certified: KRM-201, KRM-143C
Thai ShinMaywa has been manufacturing "TENTSUKI" hoists for Japan for more than 25 years.
TTTTTTT
JJJJJJJ
TTTTTTT
TTTTTTTShinMaywa is widely known as the original manufacturer of "TENTSUKI" dump hoist.
ShinMaywa is widely known as the original manufacturer of "TENTSUKI" dump hoist.
Proven Quality
http://www.shinmaywa.co.jp Printed on recycled paper.,15. 9 Z-T003 Printed in Japan3.1
Specifications and dimensions are subject to change without notice.
ShinMaywa Industries, Ltd.International Sales Dept.Special Purpose Truck Div.
3-2-43, Shitte, Tsurumi-ku, Yokohama, 230-0003, JapanTelephone : +81-45-575-5163 Facsimile : +81-45-575-9837e-mail : [email protected]
ShinMaywa (Asia) Pte. Ltd.8 Burn Road, #14-10 TrivexSingapore 369977Telephone : +65-6224-0728Facsimile : +65-6224-9678e-mail : [email protected]
Thai ShinMaywa Co., Ltd.No.199, Moo 12, Soi Daramitr (Petchkasem 120),Petchkasem Road, Om-noi, Krathumbaen, Samutsakorn 74130 ThailandTelephone : +66-2-420-4712Facsimile : +66-2-420-9863e-mail : [email protected]