the new generation workspace - facom | - … · · 2014-07-07mhspp mhspv 2201pb chs chd chspp...

T H E N E W G E N E R A T I O N W O R K S P A C E

®02

Walls no longer needed!> Thanks to its exclusive

self-supporting structure, the units are fi tted independently of walls.

> No more problems with walls which aren’t straight,or pipes or cables running to the fl oor!

Without these restrictions you can install your units wherever you like.

> A modular, upgradeable workshop to fi t your available space:

> Thanks to the wide range of storage units, you can order the level of services you need at a price which suits you.

> The modular components fi t side-by-side, on top of each other and willangle to meet your requirements.

> You can add to your equipment in line with changes in organisation and/or working methods and spread out the cost over time.

Gain more space!

> An organised workshop:> Thanks to the multiplicity of possible combinations, you can create

a made-to-measure arrangement which matches the various activitiesfor the area in question: work stations, storage and stocks.

> Your more practical and better organised workshop will becomemore effi cient.

Create your JETLINE work-space in 3D at

A new generation of upto fi t the sp

®

gradeable workspaceace available to you!

03

> Our objective:to provide you with an optimised, functional and comfortable space, enabling you to obtain better results for minimum effort.

> The solution: - A more comfortable working position thanks to units which are taller than standard units. - This is in response to the increase in the average height of individuals. - It’s also a means of optimising storage space: the workshop tool trolley fi nally fi nds a place under the work surface!

Choose comfortand ergonomic design

Create your spaceusing the ‘confi gurator’> You are completely free to design your very own workshop

on-line at the facom.com website.

> The workshop is a work-space but also a living space. When you choose Jetline System,you choose a completely safe workspace in a harmonious, pleasant and functionalenvironment.

Make everyday activities a pleasure

Create your own JETLINE workspace in 3D at

Modular Upgradeable Innovative Adaptable

®02 Create your JETLINE work-space in 3D at

Drawers> The slides open 100%. > They have been tested over 50000 open/

close cycles, that is, for 10 years use.

Key operated locks> All units have a key-operated lock and are supplied

with 2 keys including 1 articulated key.

Color scheme> Framework ELIAN grey> Doors red 3020

glazed swing-mounted sliding lift-up

> The doors are tested over 10000 open/close cycles.

Doors

Steel panel-work> All units are made from Epoxy painted steel

panels (thickness 12/10ths).

A universal product range> JETLINE system is compatible with the JETXL tool

cabinet range of tool storage accessories.

FACOM Quality> Acknowledged manufacturing quality meeting

the most exacting users’ requirements.> 5 year guarantee.

Easy to assemble> The units are designed to be “ready to install”

and are fully factory assembled.> No need for any special skills, assembly is

quick and easy.


A500PP

MHSPP CHSMHSPV CHD CHSPP2201PB CHDPP

KIT-TUBE SUP JLS-PS JLS-TRAA2/JLS-TRAA3KIT-TUBESJLS-PBG1 JLS-LIGHT EB1M/EB2M

JLS-PB1

KIT GTECH

A500PV A1000PP A1000PV

MBSPPMBAPP

MBS6T MBS7T

MBDPP

MBSPV MBDPV

PAV1 PAV2

PPAV1

PPAV1 ELEC

PPAV2

PPAVA

500

1835

500

1835

1000

1835

1000

1835

819

985

719

810

719

810

719

405

719

405

1446,4

405

1446,4

405MHA815

810 CHA815

405

719

810 MHDPV1446,4

810

721,4

985

721,4

985

721,4

985

721,4

985

1448,8

985

1448,8

985

724,5

807,5

724,5

402,5

724,5

402,5

816

402,5

1452

402,5

1452

807,5

®

®02 15®

Panels, cross beams, legs and accessories


WOOD WORKSURFACE

Ref: JLS-PB1 Barcode: 3 148518 190169Ref: JLS-PB2 Barcode: 3 148518 190329Ref: JLS-PB3 Barcode: 3 148518 190411

• Wooden panel made of multi-ply beech. Thickness 40 mm guaranteeing strength and long life. Linseed oil treatment for improved resistance to liquids and ease of maintenance.

• 3 different lengths, perfectly matching the dimensions of the base units.• Quick and easy assembly thanks to pre-positioned metal inserts.• Capable of supporting loads: 500 kg for JLS-PB1 and 1 tonne for JLS-PB2 and JLS-PB3.

* When you design a simple bench made up of a panel, feet and a rail, consider adding a service channel.KIT-GTECH Example: for a 1455 mm bench, you need 1 JLS-PB2 + 2 KIT-GTECH.

Ref. L Depthplate only

Depthwith channel* Weight

JLS-PB1 727 mm 570 mm 635 mm 12 kgJLS-PB2 1455 mm 570 mm 635 mm 24 kgJLS-PB3 2182 mm 570 mm 635 mm 36 kg

WOODEN SHELF

Ref: EB1M Barcode: 3 148518 190831Ref: EB2M Barcode: 3 148518 190916

• Wooden shelf made of multi-ply beech.Thickness: 20 mm. Linseed oil treatment.

• Supplied with two supports for installationon vertical panels.

• For mounting between two units boxesmust be drilled.

• Dimensions: 1 m (EB1M) or 2 m (EB2M).• Weight: 3.9 kg (EB1M) or 8.3 kg (EB2M)

LIGHTING

Ref: JLS-LIGHT Barcode: 3 148518 190756• Essential lighting for your comfort and precision work.• The LIGHT assembly can be fi tted: either directly under one of

the top boxes (CHS, CHD etc.);or directly under a wooden shelf (EB1M, EB2M);or by being fi xed onto a vertical hookingpanel (PAV1, PAV2, PPAV1,...) using the suppliedmetal support.

• White light. Power: 13 W/230 V.• ON/OFF button.• Length of neon tube 515 mm

(724.5 with the support).• Weight: 1.4 kg.

WOOD & STEEL WORKSURFACE

Ref: JLS-PBG1 Barcode: 3 148518 191395Ref: JLS-PBG2 Barcode: 3 148518 191470Ref: JLS-PBG3 Barcode: 3 148518 191555

* When you design a simple bench made up of a panel, feet and a rail, consider adding a service channel KIT-GTECH.Example: for a 1455 mm bench, you need 1 JLS-PB2 + 2 KIT-GTECH.

• Panel made of multi-ply beech of thickness 40 mm covered with 12/10th galvanised steelfor improved impact and heat resistance (edge also covered).

Ref. L Depthpanel only Depth with channel* Weight

JLS-PBG1 727 mm 570 mm 635 mm 16.2 kgJLS-PBG2 1455 mm 570 mm 635 mm 32.3 kgJLS-PBG3 2182 mm 570 mm 635 mm 48.5 kg

• Weight: 14,5 kg

Overall dimensions: L D H

497 mm 100 mm 985 mm

SINGLE LEG

Ref: JLS-PS Barcode: 3 148518 179935

• Foot made of Epoxy painted sheet steel (thickness 12/10ths).• Equipped with feet with jack for adjustment giving complete

stability, irrespective of the type of fl oor.• Colour ELIAN grey.

CROSS BEAM

Ref: JLS-TRAA2 Barcode: 3 148518 185158Ref: JLS-TRAA3 Barcode: 3 148518 185233

• Weight: 4,3/7.5 kg

• Connecting and reinforcement rail for bench with 1455 mm (JLS-TRAA2) o 2182 mm (JLS-TRAA3) work surface.

• Made of Epoxy painted sheet steel (thickness 12/10ths).• Colour grey rouge 3010.


240 mm 40 mm 1053/1780 mmRef: KIT-GTECH Barcode: 3 148518 191043

• The service channel is a multi-function channel:- Used to hold and protect electrical cables making them discrete and protecting them from dust.

- Allows quick and easy fi tting of top units thanks tothe pre-drilled holes provided for passageof the mounting tubes.

• The KIT-GTECH kit is used in combination with work surfaces when you don’t want top units (if you have chosen top units, you must use KIT-TUBES or KIT-TUBESUP).

• It is made of galvanised steel.• To avoid any possibility of damage, the channel is equipped

with rubber cable ways.• The length of a channel corresponds to a module of 727 mm.

For a 727 mm work surface, you need 1 KIT-GTECH.For a 1455 mm work surface,your therefore need 2 KIT-GTECH kits.For a 2182 mm work surface,you need 3 KIT-GTECH kits.

• Dimensions: L 727 x D 65 x h 70 mm

SERVICE CHANNEL

Storage cabinets (page 13).

Work surfaces (page 15).3 dimensions, 2 coverings

Verticalhooking panels (page 14).

Single legs andcross beams (page 15).

Shelves (page 15).Lighting (page 15).

Base units (page 08).

Top units (page 10).

Assembly (page 15).

W : Width - H : HeightW

H

Modular Upgradeable Innovative Adaptable

- Depth of base units and cabinets: 507.4 mm- Depth of top units: 277.8 mm.

Walls no longer needed!> Thanks to its exclusive

self-supporting structure, the units are fi tted independently of walls.

> No more problems with walls which aren’t straight,or pipes or cables running to the fl oor!

Without these restrictions you can install your units wherever you like.

> A modular, upgradeable workshop to fi t your available space:

> Thanks to the wide range of storage units, you can order the level of services you need at a price which suits you.

> The modular components fi t side-by-side, on top of each other and willangle to meet your requirements.

> You can add to your equipment in line with changes in organisation and/or working methods and spread out the cost over time.

Gain more space!

> An organised workshop:> Thanks to the multiplicity of possible combinations, you can create

a made-to-measure arrangement which matches the various activitiesfor the area in question: work stations, storage and stocks.

> Your more practical and better organised workshop will becomemore effi cient.

Create your JETLINE work-space in 3D at


721,4 mm

4560 mm

819 mm

810

mm

1835

mm

405

mm

985

mm

®04

Compositions


CORNER STARSTATION

Ref: JLS-STARSTATION Barcode: 3 148518 198844

T-FORM

Ref: JLS-TSTATION Barcode: 3 148518 198769

CHS

MBAPP

PPAVA

PPAVA

JLS-PB2

2201PB

MBS6TJLS-PS

JLS-LIGHT

PPAV1ELEC

KIT-TUBESUP x1 KIT-TUBES x2

1835

mm

985

mm81

0 mm

4733 mm 1552 mm

ANGLE

®

Compositions

05Create your own JETLINE workspace in 3D at

985

mm 1390

mm

405

mm

ANGLE

MBS7T MBS7T

PPAV1ELECPPAV1ELEC

MBAPP

PPAV1 PPAV1PPAVA

JLS-PB2 JLS-PB2

JLS-PSJLS-PS

This sketch corresponds to one island.

CHD CHS

MBSPP MBAPPMBSPV

PPAV2 PPAVA

PPAVA

JLS-LIGHT

2201PB 2201PBA1000PV

MBS7T MBS6T

JLS-PB1 JLS-PB1JLS-PB3PPAV1ELEC

FULL 2

Ref: JLS-FULL2 Barcode: 3 148518 198417



- Depth at work surface: 635 mm.- Depth at fl oor: 507 mm.

1835

mm

985

mm81

0 mm

3909 mm98

5 mm

810

mm

3182 mm

1835

mm

®06

Sets

FULL 1

Ref: JLS-FULL1 Barcode: 3 148518 198332

MEDIUM 2

Ref: JLS-MEDIUM2 Barcode: 3 148518 198684


A1000PP

MBS7T MBS7T

CHD

MBSPP

2201PB 2201PBPPAV1

JLS-LIGHT

PPAV1ELECJLS-PB1 JLS-PB3

MBS6T MBS6T

MHSPV2201PB

A1000PV

CHS

PPAV1ELECJLS-PB3

JLS-LIGHT



1835

mm

985

mm81

0 mm

1461 mm

405

mm

1835

mm

3182 mm

405

mm

985

mm81

0 mm

®

Sets

07Create your own JETLINE workspace in 3D at

BASIC 1

Ref: JLS-BASIC1 Barcode: 3 148518 198172

BASIC 2

Ref: JLS-BASIC2 Barcode: 3 148518 198257

TRAA2

JLS-PB2

JLS-PB3

PPAV1

PAV1

A1000PP

A1000PV

PPAV1ELEC

CHDPPAV1

PPAV2PPAV1ELEC

TRAA3

JLS-PS JLS-PS

JLS-LIGHT

- Depth at work surface: 635 mm.- Depth at fl oor: 507 mm.KIT-TUBESUP x2 KIT-GTECH x1

JLS-PS JLS-PS

KIT-TUBESUP x2

®08

Base units

SINGLE GLAZED DOORS

• Weight: 57 kg

Ref: MBSPV Barcode: 3 148518 185400

• Transparent doors allow you to quickly check contentsand cleanliness.

• 2 transparent swing doors made of plexiglass thickness 3 mmmounted on invisible wire hinges providing opening to 110°. The doors have been tested over 10000 open/close cycles.

• 1 Epoxy painted shelf of adjustable height,capable of supporting a 50 kg load.

Overall dimensions (including feet 168.7mm):L D H

721.4 mm 507.4 mm 985 mm

SINGLE FULL DOORS

• Weight: 58.5 kg

Ref: MBSPP Barcode: 3 148518 185318

• An opening of 110°. The doors have been testedover 10000 open/close cycles.

• 1 Epoxy painted shelf with adjustable height.Capable of supporting a load of 50 kg.


721.4 mm 507.4 mm 985 mm

FULL DOOR CORNER

• Weight: 62 kg

Ref: MBAPP Barcode: 3 148518 187268

• No more lost space with this unit, ideal for corners.• An opening of 110°. The doors have been tested

over 10000 open/close cycles.• 1 Epoxy painted shelf with adjustable height, capable of

supporting a load of 50 kg.• Fitted with a set of wooden panels made of multi-ply beech,

treated with linseed oil, 40 mm thickness.


819 x 819 mm 648 mm 985 mm


DOUBLE FULL DOORS

• Weight: 91 kg

Ref: MBDPP Barcode: 3 148518 189118

• The double unit can be used for storing tools and/or items which are too long and bulky for standard units.

• With minimal door volumes, the sliding opening is perfectfor small spaces.

• 2 metal panel sliding doors.• 1 Epoxy painted shelf with adjustable height, capable of

supporting a 75 kg load.


1448.8 mm 507.4 mm 985 mm

®

Base units

09

6 DRAWERS

• Weight: 79 kg

Ref: MBS6T Barcode: 3 148518 185585

• Drawer compositions: 6 drawers4 drawers height 60 mm

1 drawer height 130 mm 1 drawer height 270 mm• Load per drawer: 50 kg.• Useable dimensions of the drawers: L569 x D421 x H60 mm.• Drawers equipped with selective opening system.• Fully opening drawers.• Centralised locking, articulated key lock.• Drawer fronts made of composite materials acting as effective

bumpers.


721.4 mm 507.4 mm 985 mm

7 DRAWERS

• Weight: 82.5 kg

Ref: MBS7T Barcode: 3 148518 185660

• Drawer compositions: 7 drawers5 drawers height 60 mm1 drawer height 130 mm1 drawer height 200 mm

• Load per drawer: 50 kg.• Useable dimensions of the drawers: L569 x D421 x H60 mm.• Drawers equipped with selective opening system.• Fully opening drawers.• Centralised locking, articulated key lock.• Drawer fronts made of composite materials acting as effective

bumpers.


721.4 mm 507.4 mm 985 mm

> FEETThe unit is fi tted with jack-mounted feet for adjustment providingcomplete stability irrespective of the type of fl oor.

> TECHNICAL CHANNEL• Used to hold and protect electrical cables making them discrete and protecting them from dust.• Allows quick and easy assembly of top units thanks to pre-drilled holes provided for passage of assembly tubes.• Avoiding tools falling.

> PLINTHSMade from painted sheet metal, these are simply screwed togetherand come apart easily if necessary for cleaning or for relocationof the unit.

> SIDE PERFORATIONSSides of the unit are ready drilled and JETXL accessories may be added (see range of accessories in the F08 catalogue).


GLAZED DOUBLE DOOR

• Weight: 88 kg

Ref: MBDPV Barcode: 3 148518 189293


• With minimal door volumes, the sliding opening is perfectfor small spaces.

• Transparent doors allow you to check immediately on equipment, storage and cleanliness.

• 2 sliding transparent doors in plexiglass thickness 3 mm. • 1 Epoxy painted shelf with adjustable height,

capable of supporting a load of 75 kg.


1448.8 mm 507.4 mm 985 mm

- All units are made of Epoxy painted sheet steel (thickness 12/10ths).- All units with doors or drawers are closed using a key and are supplied with 2 keys,including one which is articulated.

- Framework colour ELIAN grey and red doors 3020- Shelves are made of Epoxy painted sheet metal and are of adjustable height.

®10

Top units

SINGLE GLAZED DOORS

• Weight: 26 kg

Ref: MHSPV Barcode: 3 148518 189453


• These cabinets are ideally suited for application of the ‘5S’ rule: SEIRI (clear away), SEITON (store), SEISO (clean), SEIKETSU (specify storage rules),SHITSUKE (ensure compliance).

• Transparent swing doors made of Plexiglass thickness 3 mm, opening to 110°. The doors are tested over10000 open/close cycles.

• 2 Epoxy painted shelves with adjustable height.Capable of supporting a load of 20 kg.

• Quickly and easily fi tted to a base unit using a “KIT-TUBES”or “KIT-TUBESUP” fi tting kit.


719 mm 277.8 mm 810 mm

SINGLE FULL DOORS

• Weight: 27.5 kg

Ref: MHSPP Barcode: 3 148518 189378

• 2 swing doors, mounted on invisible wire hinges opening to 110°. The doors have been tested over 10000 open/close cycles.

• 2 painted shelves. Epoxy adjustable height.Capable of supporting a load of 20 kg.

• Quickly and easily fi tted to a base unit using a «KIT-TUBES»or «KIT-TUBESUP» fi tting kit.


719 mm 277.8 mm 810 mm

WALL CABINET, 1 DRAW

• Weight: 31 kg

Ref: 2201PB Barcode: 3 148517 919730

• Compact and effi cient, this cabinet allows multiple storage organisation options.

• Cabinet combining a vertical hooking part and a drawer part.Vertical Hooking Part: storage surface: 1 m 2.The back and sides of the cabinet and door linings areperforated for hanging tools using the CKS system. 180° opening of 2 swing doors for maximum visibility and accessibility.Drawer Part: 1 drawer equipped with ball-bearing slides, opening 100%. Useable dimensions of the drawer:569 x 60 x 210 mm. Centralised locking of doors and of the drawer using lock with key.



719 mm 277.8 mm 810 mm


®

Top units

11

OPEN CORNER OPEN TOP CORNER BOX

• Weight: 13.5 kg

Ref: MHA Barcode: 3 148518 189613

• Ideal complement to the base corner unit for optimised layout of normally unused space.

• 2 Epoxy painted shelves with adjustable height, capable of supporting a 20 kg load.


Ref: CHA Barcode: 3 148518 189880

• Open box for quick access.• Ideal for storage of documents or of consumables.• Ideal complement to the base corner unit for optimised layout of

normally unused space.• Admissible load 30 kg.• Quickly and easily fi tted to a base unit using a “KIT-TUBES”

or “KIT-TUBESUP” fi tting kit.


815 x 815 mm 391.6 mm 810 mm


815 x 815 mm 391.6 mm 405 mm• Weight: 10 kg


DOUBLE GLAZED DOORS

• Weight: 31 kg

Ref: MHDPV Barcode: 3 148518 189538


• The vertical hooking panels offer visibility and direct accessto tools.


• 2 transparent plexiglass sliding doors thickness 3 mm.• Equipped with a perforated panel (6 x 6 mm in 12 mm steps)

for fi xing tools using the CKS range of hooks (see the range in the F08 catalogue).



1446.4 mm 277.8 mm 810 mm



®12

Top units

SINGLE TOP BOX WITH DOOR

• Weight: 13.5 kg

Ref: CHSPP Barcode: 3 148518 189965

• Ideal for storage of documents or consumables• Lift-up sheet metal door equipped with a support strut tested

over 10000 open/close cycles.• Admissible load 30 kg.• Quickly and easily fi tted to a base unit using a “KIT-TUBES”



719 mm 277.8 mm 405 mm


OPEN SINGLE TOP BOX

Ref: CHS Barcode: 3 148518 186971

• Open box for quick access.• Ideal for storage of documents or consumables• Admissible load 30 kg.• Quickly and easily fi tted to a base unit using a “KIT-TUBES”



719 mm 277.8 mm 405 mm• Weight: 8.5 kg

DOUBLE TOP BOX WITH DOOR

• Weight: 19 kg

Ref: CHDPP Barcode: 3 148518 190084

• Ideal for storage of documents or consumables• Lift-up sheet metal door equipped with a support strut tested

over 10000 open/close cycles.• Admissible load 50 kg.• Closed using key.• Quickly and easily fi tted to a base unit using a “KIT-TUBES”



1446.4 mm 277.8 mm 405 mm• Weight: 14 kg

OPEN DOUBLE TOP BOX

Ref: CHD Barcode: 3 148518 187183

• Open box for quick access.• Ideal for storage of documents or consumables• Admissible load 50 kg.• Quickly and easily fi tted to a base unit using a “KIT-TUBES”



1446.4 mm 277.8 mm 405 mm

®

Storage cabinets

13

2 GLAZED DOORS

Ref: A1000PV Barcode: 3 148518 186544

• An indispensable cabinet for organised and effective storage of all tools and consumables.


• Transparent swing doors made of Plexiglass thickness 3 mm, mounted on invisible wire hinges opening to 110°.

• In order to ensure that the cabinet is rigid and secure the doors are integrally lined with 12/10th metal panels.

• The doors have been tested over 10000 open/close cycles.• 3 Epoxy painted shelves with adjustable height (100 mm

steps). Capable of supporting a load of 75 kg.• Closure using key, two points, top and bottom.


1000 mm 507.4 mm 1835 mm

1 GLAZED DOOR

Ref: A500PV Barcode: 3 148518 191210

• Low width for restricted spaces.• Transparent doors allow you to quickly check contents

and cleanliness.• These cabinets are ideally suited for application of the ’5S’ rule:

SEIRI (clear away), SEITON (store), SEISO (clean), SEIKETSU (specify storage rules), SHITSUKE (ensure compliance).

• 1 transparent swing door made of Plexiglass thickness 3 mm, mounted on invisible wire hinges opening to 110°. The doors have been tested over 10000 open/close cycles.

• 3 Epoxy painted shelves with adjustable height(100 mm steps) capable of supporting a 35 kg load.

• Closure using key, two points, top and bottom.


500 mm 507.4 mm 1835 mm

1 FULL DOOR

• Weight: 70 kg • Weight: 66.5 kg • Weight: 102 kg • Weight: 95 kg

Ref: A500PP Barcode: 3 148518 191128

• Low width for restricted spaces.• For use as standard cabinet or as clothes locker.• 1 swing door, mounted on invisible wire hinges opening

to 110°. The doors have been tested over 10000 open/close cycles.

• 3 Epoxy painted shelves with adjustable height(100 mm steps). Capable of supporting a load of 35 kg.

• 1 wardrobe bar for use as clothes locker.• Handle fully integrated in the door for comfortable and

ergonomic opening.• Closure using key, two points, top and bottom.


500 mm 507,4 mm 1835 mm


2 FULL DOORS

Ref: A1000PP Barcode: 3 148518 186896

• An indispensable cabinet for organised and effective storage of all tools and consumables.

• Swing doors mounted on invisible wire hinges opening to 110°.• In order to ensure that the cabinet is rigid and secure the doors

are integrally lined with 12/10th sheet metal panels.• The doors have been tested over 10000 open/close cycles

that is, for 10 years use.• 3 Epoxy painted shelves with adjustable height

(100 mm steps). Capable of supporting a load of 75 kg.• Handle fully integrated into the door for comfortable and

ergonomic opening.• Closure using key, two points, top and bottom.


1000 mm 507.4 mm 1835 mm



14

Fitting panels and kits

®

• Perforated panel: 6 x 6 mm in steps of 12 mm.• Fixing of tools using the CKS range of hooks

(see catalogue F08).• Can also hold shelves (perforations provided for shelf

supports).• Stacking of 2 half-panels possible.

• Fitting using “KIT-TUBES” mounting tubes(for later installation to a unit) or “KIT-TUBESUP”(for installation on a single work surface).

• Made of Epoxy painted sheet steel(thickness 12/10ths).

• Colour red 3020.

PANELS

Ref: PAV1 Barcode: 3 148518 185912Ref: PAV2 Barcode: 3 148518 186032

Overall dimensions:Ref. L H Thickness WeightPAV1 724.5 mm 805 mm 45 mm 5.3 kgPAV2 1452 mm 805 mm 45 mm 9.1 kg

Ref: PPAV1 Barcode: 3 148518 186117Ref: PPAV2 Barcode: 3 148518 186384

Overall dimensions:Ref. L H Thickness Weight

PPAV1 724.5 mm 402.5 mm 45 mm 3.5 kgPPAV2 1452 mm 402.5 mm 45 mm 6 kg

HALF-PANELS

CORNER HALF-PANELS HALF PANEL 1 MODULE+POWER POINT BLOCK

Ref: PPAVA Barcode: 3 314851 8187343 Ref: PPAV1ELEC Barcode: 3 148518 186469

NOT AVAILABLEIN THE UK

• Weight: 5 kg • Weight: 4.1 kg

• Fitted with a block of 6 sockets with on-off switch.• Stacking of 2 panels possible.

Overall dimensions:L H Thickness

816 x 816 mm 402.5 mm 45 mm

Overall dimensions:L H Thickness

724.5 mm 402.5 mm 45 mm


> Gain space: wall surfaces are transformed into storage surfaces. > Gain time: direct access to tools.

The KIT-TUBES is usedfor fi tting top units

onto the base units.It is made up of 2 Epoxy

painted metal tubes.Dimensions: Ø 30 mm.

Length: 1188 mm.

The KIT-TUBESUP kit is used for fi ttingtop units onto a single work surface.It is made up of: work surface and a multi-function service channel.Dimensions: Dia. 30 mm.Length: 841 mm.

FITTING FITS

Ref: KIT-TUBES Barcode: 3 148518 185745Ref: KIT-TUBESUP Barcode: 3 148518 185820

> An innovation from FACOM:no wall required for fi xing top units!

Thanks to this tubular system the structure is self-supporting.Fitting is quick and simple:1. Position the base units.2. Fit the tubes and fi x the service channel.3. Consolidate the assembly by fi xing your work surface.4. Install the top units.The tube dimensions ensure the stability and safety of the assembly.

15®

Panels, cross beams, legs and accessories


WOOD WORKSURFACE

Ref: JLS-PB1 Barcode: 3 148518 190169Ref: JLS-PB2 Barcode: 3 148518 190329Ref: JLS-PB3 Barcode: 3 148518 190411

• Wooden panel made of multi-ply beech. Thickness 40 mm guaranteeing strength and long life. Linseed oil treatment for improved resistance to liquids and ease of maintenance.

• 3 different lengths, perfectly matching the dimensions of the base units.• Quick and easy assembly thanks to pre-positioned metal inserts.• Capable of supporting loads: 500 kg for JLS-PB1 and 1 tonne for JLS-PB2 and JLS-PB3.

* When you design a simple bench made up of a panel, feet and a rail, consider adding a service channel.KIT-GTECH Example: for a 1455 mm bench, you need 1 JLS-PB2 + 2 KIT-GTECH.

Ref. L Depthplate only

Depthwith channel* Weight

JLS-PB1 727 mm 570 mm 635 mm 12 kgJLS-PB2 1455 mm 570 mm 635 mm 24 kgJLS-PB3 2182 mm 570 mm 635 mm 36 kg

WOODEN SHELF

Ref: EB1M Barcode: 3 148518 190831Ref: EB2M Barcode: 3 148518 190916

• Wooden shelf made of multi-ply beech.Thickness: 20 mm. Linseed oil treatment.

• Supplied with two supports for installationon vertical panels.

• For mounting between two units boxesmust be drilled.

• Dimensions: 1 m (EB1M) or 2 m (EB2M).• Weight: 3.9 kg (EB1M) or 8.3 kg (EB2M)

LIGHTING

Ref: JLS-LIGHT Barcode: 3 148518 190756• Essential lighting for your comfort and precision work.• The LIGHT assembly can be fi tted: either directly under one of

the top boxes (CHS, CHD etc.);or directly under a wooden shelf (EB1M, EB2M);or by being fi xed onto a vertical hookingpanel (PAV1, PAV2, PPAV1,...) using the suppliedmetal support.

• White light. Power: 13 W/230 V.• ON/OFF button.• Length of neon tube 515 mm

(724.5 with the support).• Weight: 1.4 kg.

WOOD & STEEL WORKSURFACE

Ref: JLS-PBG1 Barcode: 3 148518 191395Ref: JLS-PBG2 Barcode: 3 148518 191470Ref: JLS-PBG3 Barcode: 3 148518 191555

* When you design a simple bench made up of a panel, feet and a rail, consider adding a service channel KIT-GTECH.Example: for a 1455 mm bench, you need 1 JLS-PB2 + 2 KIT-GTECH.

• Panel made of multi-ply beech of thickness 40 mm covered with 12/10th galvanised steelfor improved impact and heat resistance (edge also covered).

Ref. L Depthpanel only Depth with channel* Weight

JLS-PBG1 727 mm 570 mm 635 mm 16.2 kgJLS-PBG2 1455 mm 570 mm 635 mm 32.3 kgJLS-PBG3 2182 mm 570 mm 635 mm 48.5 kg

• Weight: 14,5 kg


497 mm 100 mm 985 mm

SINGLE LEG

Ref: JLS-PS Barcode: 3 148518 179935

• Foot made of Epoxy painted sheet steel (thickness 12/10ths).• Equipped with feet with jack for adjustment giving complete

stability, irrespective of the type of fl oor.• Colour ELIAN grey.

CROSS BEAM

Ref: JLS-TRAA2 Barcode: 3 148518 185158Ref: JLS-TRAA3 Barcode: 3 148518 185233

• Weight: 4,3/7.5 kg

• Connecting and reinforcement rail for bench with 1455 mm (JLS-TRAA2) o 2182 mm (JLS-TRAA3) work surface.

• Made of Epoxy painted sheet steel (thickness 12/10ths).• Colour grey rouge 3010.


240 mm 40 mm 1053/1780 mmRef: KIT-GTECH Barcode: 3 148518 191043

• The service channel is a multi-function channel:- Used to hold and protect electrical cables making them discrete and protecting them from dust.

- Allows quick and easy fi tting of top units thanks tothe pre-drilled holes provided for passageof the mounting tubes.

• The KIT-GTECH kit is used in combination with work surfaces when you don’t want top units (if you have chosen top units, you must use KIT-TUBES or KIT-TUBESUP).

• It is made of galvanised steel.• To avoid any possibility of damage, the channel is equipped

with rubber cable ways.• The length of a channel corresponds to a module of 727 mm.

For a 727 mm work surface, you need 1 KIT-GTECH.For a 1455 mm work surface,your therefore need 2 KIT-GTECH kits.For a 2182 mm work surface,you need 3 KIT-GTECH kits.

• Dimensions: L 727 x D 65 x h 70 mm

SERVICE CHANNEL

985

mm81

0 mm

3182 mm

1835

mm

MBS6T

MHSPPPPAV1ELEC

CHD

MBSPP

PPAV1JLS-PB3 A1000PP


Your distributor

1327

7.10

COMPOSITION MEDIUM 1

Ref: JLS-MEDIUM1 Barcode: 3 148518 198509

All the space that you need...Some examples of layouts

B.P. 99 - 6, rue Gustave Eiffel - 91423 Morangis Cedex FranceTel : 01 64 54 45 45 / Fax : 01 69 09 60 93

the new generation workspace - facom | - … · · 2014-07-07mhspp mhspv 2201pb chs chd chspp...

Documents