the leader in hose systems technologycampbellfittings.com/pdfs/campbell-fittings-catalog.pdf ·...
TRANSCRIPT
2017
THE LEADER IN HOSE SYSTEMS TECHNOLOGY
NEW!
• Combination Nipples• Menders• TOE Nipples• Reducing Nipples• Suction Hose Couplings• NST Suction Hose Couplings• Ball & Socket Couplings• Strainers• Foot Valves
• Band Clamps• Worm Gear Clamps• T-Bolt Clamps• Double Bolt Clamps• Spiral Clamps
• Barbed Insert Fittings• Brass Push-on Fittings• Garden Hose Couplings• Brass Ferrules
• Ferrules (standard length)• Ferrules (206/frac)• Ferrules (long)• Ferrules (light duty)• Sleeves (standard length)• Sleeves (short)
• ChemJoint™ Couplings• ChemJoint™ Male Stems• ChemJoint™
Weld-on Couplings• ChemJoint™ Unions
• Viton® Seal Ground JointCouplings
• Viton® Seal Crimped SteamCouplings
• HeatWave Couplings• Interlocking Male Stems• Air Hammer Couplings• Interlocking U-Bolt Clamps• Whip Check Safety Cables
• Universal Couplings• UniversaLock™ Couplings• Nitrogen Couplings• Single-Lock Couplings• Double-Lock Couplings
• Campbell Cobra™Cam & Groove Couplings
• Standard Cobra™Cam & Groove Couplings
• Crimpnology Nipples• FRAC-16C• Male Swivels• 206 Hose Union• Flanges• Turnback Flanges
Sanitary Fittings for Food & Beverage• Tri-Clamp Couplings• Machined Ferrules• PCT Couplings (Wine)• Wine Ferrules
PAGES 3-8A
PAGES 9-12B
PAGES 13-20C
PAGES 21-26D
PAGES 27-32E
PAGES 33-36F
PAGES 37-40G
PAGES 41-48H
PAGES 49-54I
PAGES 55-61J
Campbell Fittings
NEW!
NEW!
Sanitary Fittings for Food & Beverage• Tri-Clamp Couplings• Machined Ferrules• PCT Couplings (Wine)• Wine Ferrules
Campbell Coupling Selection GuideFrom the Selection Guide below, choose an appropriate coupling based on the hose type and application working pressure.Hose construction will affect the working pressure of a hose system. The following chart outlines the maximum working pressure of each Campbell coupling based on the type and size of hose used, as well as the attachment, and identifies the Campbell catalog section in which the coupling can be found.
A
B
C
D
E
F
G
Fitting/Coupling Attachment Hose Type 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 6 8 10 12Combination Nipple Short Sleeve Rubber 400 350 300 275 250 225 225 225 175 175 150 125 100
Combination Nipple Short Sleeve Chemical 200 200 200 140 130 120 110 100 50 - - - -
Combination Nipple Short Sleeve PVC 150 125 100 90 85 65 60 55 40 30 20 - -
Suction Coupling Short Sleeve Rubber - - - 275 250 225 210 200 175 150 100 - -
Suction Coupling Short Sleeve PVC - - - 90 85 65 60 55 40 30 20 - -
Ball & Socket Coupling 3,6 Short Sleeve Rubber - - - - - 300 - 250 225 140 60 - -
Ball & Socket Coupling 3,6 Short Sleeve PVC - - - - - 170 - 140 100 80 50 - -
Crimpnology Nipple Ferrule Chem/Rubber - - 500 350 325 300 275 250 250 225 175 - -
Crimpnology Nipple Ferrule Soft - - 200 175 150 150 125 100 75 50 20 - -
Long Crimpnology Nipple Long Ferrule Rubber - - - - 1000 1000 650 600 500 - - - -
Crimpnology Nipple Swivel Ferrule Chem/Rubber - 500 500 - - - - - - - - - -
Long Crimpnology Nipple Swivel Long Ferrule Chem/Rubber - - - 500 500 500 - - - - - - -
Crimpnology Flange (steel) 4 Ferrule Chem/Rubber - - - - 285 285 275 250 250 225 175 - -
Crimpnology Flange (ss) 4 Ferrule Chem/Rubber - - - - 230 230 230 230 230 225 - - -
FRAC-16C Frac Ferrule Rubber - - - - - - - - 400 - - - -
206 Hose Union (forged steel) Frac Ferrule Rubber - - - - - - - - 400 - - - -
Campbell Cobra SS C&G 5 Ferrule Chem/Rubber - - 250 - 250 250 150 150 125 - - - -
Campbell Cobra AL C&G 5 Ferrule Chem/Rubber - - - - 250 200 150 125 75 call - - -Viton Ground Joint/
Air Hammer/Male Stem U-Bolt Clamp Rubber/Steam 1500 1250 1250 1250 1250 1250 800 500 500 - - - -
Viton Ground Joint Cplg/Male Stem Staked-on Ferrule Steam 1250 1250 1250 - - call - call - - - - -Viton Ground Joint/
Air Hammer/Male Stem Long Ferrule Rubber 1000 1000 1000 1000 1000 1000 650 500 500 - - - -
HeatWave Coupling/HW Male Staked-on Ferrule Rubber - - - - - call - call - - - - -
UniversaLock 6 Ferrule Air 300 300 300 - - - - - - - - - -
Universal 6 Ferrule Air 150 150 150 - - - - - - - - - -
Single-Lock Cplg 6 Ferrule Air 300 300 300 - - - - - - - - - -
Double-Lock Cplg 6 Ferrule Air 300 300 300 - - - - - - - - - -
ChemJoint/Male Stem Ferrule Chemical 350 400 450 325 250 250 225 225 200 - - - -
ChemJoint/Male Stem Ferrule Rubber 350 400 450 425 400 350 325 300 250 - - - -
Tri-Clamp Ferrule Sanitary - - 500 - 450 350 325 300 - - - - -
Tri-Clamp Mach. Ferrule Sanitary - - 500 - 500 400 375 350 - - - - -
Wine Fitting Ferrule Sanitary - - - - 450 350 - 300 - - - - -
Wine Fitting Band Clamps Sanitary - - - - 100 100 - 50 - - - - -
Hose System Components Hose SizeMAX. SYSTEM WORKING PRESSURE (PSI @ 70°F)
1) For normal fluids (not hazardous, combustible, flammable, volatile, corrosive, ammonia or LPG). Individual testing should be employed for non-normal fluids to ensure capability. Pressures shown are only valid for the fitting/coupling/attachment and hose combinations indicated and for their threaded mating parts. System working pressure does not include end pull forces. Not for plastic fittings/couplings. All hose systems must be assembled using Campbell procedures and crimp specifications. See elevated temperature derating chart above. Consult factory for reduced temperatures. Never exceed the working pressure of the lowest rated component in the hose system. Maximum working pressure includes the highest pressure the system will experience, such as spikes, surges, and water hammer effects. (For example: If a system consists of a hose rated to 150 PSI and the couplings are rated to 500 PSI, the system should never be used in excess of 150 PSI.)
2) Hose descriptions: Air - any smooth bore rubber air or water hose. Includes most general purpose hose; Chemical – any smooth bore rubber chemical hose, including plastic lined (PTFE, UHMW, XLPE). Does not include soft tube hose; PVC – any smooth bore PVC or vinyl hose; Rubber – any smooth bore rubber hose except steam, hot tar & asphalt, chemical, and soft tube hose; Soft – any smooth bore rubber hose with a thick, soft tube. Usually gum rubber and some food-grade hose; Steam – includes hot tar and asphalt; Sanitary – includes any food-grade hose
3) Ball & Socket pressure ratings are based on 1.5x WP.
4) Due to limitations with flanges, consult factory for tem-peratures other than 70°F.
5) Campbell COBRA Cam & Groove Couplings are identified by the name “Campbell” on the body, by the ferrule interlock groove, and by the part number, which includes a “C” suffix. Not for air or gas service.
6) Maximum temperature 160°F.
* System temperature is affected by both the media and the environment.
Steam, Hot Tar, Asphal t 1.00 0.95 0.81 0.68 0.56 0.44 0.32 0.20 0.08 N/R
PVC 1.00 0.82 0.30 N/R N/R N/R N/R N/R N/R N/R
All other 1.00 0.91 0.64 0.42 0.20 N/R N/R N/R N/R N/R
No hose: weld-on or union 1.00 1.00 0.97 0.95 0.92 0.89 0.86 0.84 0.81 N/R
HOSE SYSTEM PRESSURE DERATING MULTIPLIERS FOR ELEVATED TEMPERATURES (°F)*
Hose Type 70° 90° 150° 200° 250° 300° 350° 400° 450° 500°
N/R means NOT RECOMMENDED!
1
2
HYDROSTATIC TEST REPORT Hose Fuel drop: 3" ContiTech (GY) Infinity r ated to 100 psi. Couplings Cam & Groove: 3” Campbell Cobra aluminum C x E - coupling/sleeve system rated to 75 psi. WPAttachmentCrimped: Aluminum SleevesGoalBurst hose beyond 400 psi. (hose WP of 100 psi. @ 4 to 1 Safety Factor)ResultsHose burst at 508 psi. (system exceeded 4x WP)
HYDROSTATIC TEST REPORT Hose Oilfield: 4" ContiTech (GY) FRAC Blender Hose r ated to 400 psi. Couplings Crimpnology Nipple: 4” FRAC-16 both ends* - fitting/ferrule system rated to 400 psi WPAttachmentCrimped: Campbell Fr ac Fer rules, Plated SteelGoalBurst hose beyond 1600 psi. (hose WP of 400 psi. @ 4 to 1 Safety Factor)ResultsHose burst at 1715 psi. (system exceeded 4x WP)
* NOTE: similar successful r esults have been achieved with the Campbell “one-piece” 206 union manufactured with the same hose shank design for the same application.
HYDROSTATIC TEST REPORT Hose High pressure air: 2" Dayco Wildcatter r ated to 3000 psi.* Couplings Ground Joint: 2” Campbell Viton® Seal female x male - coupling/ferrule system rated to 1000 psi. WPAttachmentCrimped: Steel Long Fer rulesGoalEstablish the limits of the coupling/ferrule system, performed with the wing nut tightened only by hand. *NOTE: Campbell system is only rated to 1000 psi.ResultsHose burst at 9500 psi. (couplings exceeded WP by more than 9x WP)
HYDROSTATIC TEST REPORT Hose Chemical: 2" ContiTech (GY) XLPE r ated to 150 psi. Couplings ChemJoint®: 2” male x female - coupling/ferrule system rated to 250 psi. WP (swivel nut tightened by hand)AttachmentCrimped: Stainless Steel Fer rulesGoal Burst hose beyond 600 psi. (hose WP of 150 psi. @ 4 to 1 Safety Factor) Results: Hose burst at 1426 psi. (system exceeded 4x WP)
HYDROSTATIC TEST REPORT Hose Layflat: 1-1/2" Kuriyama rated to 75 psi. Couplings Aluminum pin-lug: 1-1/2” Campbell male x female - coupling/sleeve system rated to 150 psi.AttachmentCrimped: Carbon Steel SleevesGoal Burst hose beyond 225 psi. (hose WP of 75 psi. @ 3 to 1 Safety Factor)ResultsHose burst at 228 psi. (system exceeded 3x WP)
HYDROSTATIC TEST REPORT Hose High pressure air: 3” Boston Bulldog Gold HP Air Hose rated to 600 psi. Couplings Ground Joint/Male Stem: 3” Heat Wave® male stem on both ends -coupling/ferrule system rated to 600 psi WPAttachmentCrimped: Staked-on Fer ruleGoal Burst hose beyond 2400 psi. at 200°F (hose WP of 600 psi. @ 4 to 1Safety Factor) Results Hose burst at 3539 psi. at 200°F (system exceeded 4x WP)
HYDROSTATIC TEST REPORT Hose Frac: 4” ContiTech Oilfield Fracturing Hose rated to 400 psi. Couplings 206 Hose Union: Male x female Campbell 206 hose union rated to 400 psi. Attachment Crimped: Campbell Fr ac Fer rules, Plated SteelGoal Burst hose beyond 1600 psi. (hose WP of 400 psi. @ 4 to 1 Safety Factor) Results Hose burst at 1879 psi. (system exceeded 4x WP)
HYDROSTATIC TEST REPORT Hose Sanitary: 1-1/2” Continental Purple Snake rated to 232 psi. Couplings Sanitary: 1-1/2” Tri-Clamp -fitting/ferrule system rated to 450 psi. WPAttachmentCrimped: Stainless Steel Fer rulesGoal Burst hose beyond 928 psi. (hose WP of 232 psi. @ 4 to 1 Safety Factor)Results Hose burst at 2198 psi. (system exceeded 9.5x WP)
Abbreviated Reports and ResultsCampbell engineering has conducted nearly 1,000 hydrostatic tests. The following are results from several popular products. Please contact our customer support team to receive test reports on other Campbell products.
The Safety FactorThe RMA requires that hose working pressures include a safety factor commensurate with their intended application. Most hoses are required to meet a 4x safety factor, except the following: Water hose rated under 150 PSI requires a 3x safety factor; Steam hose requires a 10x safety factor; and Hose conveying gas in a liquid state requires a 5x safety factor. (For example: a 150 PSI rated air hose has a 4x safety factor and must be successfully tested to a minimum of 600 PSI.)Campbell’s fitting and coupling pressure ratings match the RMA safety factor requirements with most hoses. Due to the wide variety of industrial hoses, as well as variations in design, construction, and material, we cannot guarantee that our pressure ratings meet the safety factor requirement with every hose.If you have any questions about pressure ratings, please contact Campbell Fittings.
Campbell Test Reports
ACampbell Fittings
3
c
Fittings & Accessories for Multi-Purpose and Utility Hose
COMBINATION NIPPLES AND MENDERSFeatures & Benefits• Maximum number
of serrations for maximum holding power.
• Long lead serration for easier hose insertion.
• Formed hex wrench area on 3/4” through 1-1/2” combination nipples for easier installation.
Recommended Hose Attachment• Sleeves• Preformed Bands
Recommended Use• Liquid, bulk handling, low-
pressure air
Bauer-style vs. Campbell Ball & Socket
SUCTION HOSE COUPLINGSFeatures & Benefits• Maximum number of serrations for
maximum holding power.• Long lead serration for easier hose
insertion.• Suction Couplings machined from
pipe eliminate porosity and parting lines, improving sealing and retention.
Recommended Hose Attachment• Sleeves• Preformed Bands
Recommended Use• Liquid, bulk handling
Manufacturing Suction Hose Couplings from pipe eliminates wide, flat mating surfaces at the male and female halves.
BALL & SOCKET COUPLINGS Features & Benefits• Proven, Campbell-style machined
hose shank is designed for crimping (crimp specs available).
• Shank design dramatically improves sealing and retention, cuts installation time in half.
• Hose shanks are welded to ball & socket ball ends.
Recommended Hose Attachment• Sleeves
Recommended Use• Water Suction/Discharge• Sewage bypass
Campbell Crimpnology™ offers crimping flexibility for your multi-purpose hose applications.
A
MAX. SYSTEM WORKING PRESSURE (PSI @ 70°F) SEE NOTE 1
Hose System Components Hose Size Fitting/Coupling Attachment Hose Type 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 6 8 10 12Combination Nipple Short Sleeve Rubber 400 350 300 275 250 225 225 225 175 175 150 125 100
Combination Nipple Short Sleeve Chemical 200 200 200 140 130 120 110 100 50 - - - -
Combination Nipple Short Sleeve PVC 150 125 100 90 85 65 60 55 40 30 20 - -
Suction Coupling Short Sleeve Rubber - - - 275 250 225 210 200 175 150 100 - -
Suction Coupling Short Sleeve PVC - - - 90 85 65 60 55 40 30 20 - -
Ball & Socket Cplg* Short Sleeve Rubber - - - - - 300 - 250 225 140 60 - -
Ball & Socket Cplg* Short Sleeve PVC - - - - - 170 - 140 100 80 50 - -
See footnotes 1, 2, 3 and 6 on Page 1 *Ball & Socket safety factor is 1.5x working pressure.4
c
ACOMBINATION NIPPLES & MENDERS
THREADED
partnumberHAS-2HAS-3HAS-4HAS-5HAS-6HAS-8HAS-10HAS-12HAS-16HAS-20HAS-24HAS-32HAS-40HAS-48
1/23/411-1/41-1/222-1/2345681012
hosesize
listeach 4.434.545.286.817.629.92
19.5623.4336.1283.8294.67
165.00267.62389.69
Steel
HAPS-2HAPS-3HAPS-4HAPS-5HAPS-6HAPS-8HAPS-10HAPS-12HAPS-16HAPS-20HAPS-24HAPS-32HAPS-40HAPS-48
1/23/411-1/41-1/222-1/2345681012
4.915.076.137.278.58
11.9822.7327.5440.9591.99
105.57203.88337.27491.65
Plated Steel
HASS-2HASS-3HASS-4HASS-5HASS-6HASS-8HASS-10HASS-12HASS-16HASS-20HASS-24HASS-32HASS-40HASS-48
1/23/411-1/41-1/222-1/2345681012
20.8920.9421.0426.8332.9244.5581.92
116.23182.36400.95503.12965.25
2782.435605.26
316 Stainless
HAHAST-4HAHAST-6HAHAST-8HAHAST-12HAHAST-16
11-1/2234
PORPORPORPORPOR
Hastelloy®
HAB-2HAB-3HAB-4HAB-5HAB-6HAB-8HAB-10HAB-12HAB-16
1/23/411-1/41-1/222-1/234
17.9925.8126.0032.9836.9752.8592.75
126.77259.90
Brass
HAA-2HAA-3HAA-4HAA-5HAA-6HAA-8HAA-10HAA-12HAA-16HAA-20HAA-24
1/23/411-1/41-1/222-1/23456
15.9415.1316.1316.8017.1520.2750.4048.0076.78
167.97188.75
Aluminum
BEVELED
partnumberHAS-3 BVHAS-4 BVHAS-5 BVHAS-6 BVHAS-8 BVHAS-10 BVHAS-12 BVHAS-16 BVHAS-20 BVHAS-24 BVHAS-32 BVHAS-40 BVHAS-48 BV
3/411-1/41-1/222-1/2345681012
hosesize
listeach6.806.899.399.50
11.7622.2126.3540.0888.55
101.19181.28320.17453.82
Steel
HASS-2 BVHASS-3 BVHASS-4 BVHASS-5 BVHASS-6 BVHASS-8 BVHASS-10 BVHASS-12 BVHASS-16 BVHASS-20 BVHASS-24 BVHASS-32 BVHASS-40 BVHASS-48 BV
1/23/411-1/41-1/222-1/2345681012
27.3926.8226.1338.9734.1754.3996.71
122.00182.72520.18502.28837.16
PORPOR
316 Stainless
GROOVED
partnumberHAGS-3HAGS-4HAGS-5HAGS-6HAGS-8HAGS-10HAGS-12HAGS-16HAGS-20HAGS-24HAGS-32HAGS-40HAGS-48
3/411-1/41-1/222-1/2345681012
hosesize
listeach14.8910.8913.1314.3217.6323.7125.5437.3784.90
101.58178.05313.73441.60
Steel
HAGSS-4HAGSS-5HAGSS-6HAGSS-8HAGSS-12HAGSS-16HAGSS-20HAGSS-24HAGSS-32
11-1/41-1/2234568
42.5745.8746.0452.41
142.92198.96520.18561.51
1267.59
316 Stainless
REDUCER
partnumberHRS-4X3HRS-5X4HRS-6X5HRS-8X6HRS-10X8HRS-12X10HRS-16X12
1 X 3/41-1/4 X 11-1/2 X 1-1/42 X 1-1/22-1/2 X 23 X 2-1/24 X 3
npt xhose
listeach11.6615.3413.8616.9630.9637.3275.79
Steel
HRPS-4X3HRPS-5X4HRPS-6X5HRPS-8X6HRPS-10X8HRPS-12X10HRPS-16X12
1 X 3/41-1/4 X 11-1/2 X 1-1/42 X 1-1/22-1/2 X 23 X 2-1/24 X 3
11.6616.1114.5517.8132.5139.1978.82
Plated Steel
HRSS-4X3HRSS-5X4HRSS-6X5HRSS-8X6HRSS-10X8
1 X 3/41-1/4 X 11-1/2 X 1-1/42 X 1-1/22-1/2 X 2
46.1657.7283.4098.91
122.23
316 Stainless
Other configurations and materials not listed above can be quoted upon request.
partnumber
hosesize
listeach
5
PHONE 800-367-3678FAX [email protected]
EXPANDER
partnumberHES-3X4HES-4X5HES-5X6HES-6X8HES-8X10HES-10X12HES-12X16
3/4 X 11 X 1-1/41-1/4 X 1-1/21-1/2 X 22 X 2-1/22-1/2 X 33 X 4
npt xhose
listeach8.05
10.1910.8920.3031.1538.2577.02
Steel
Plated SteelHEPS-2X3HEPS-3X4HEPS-4X5HEPS-5X6HEPS-5X8HEPS-6X8HEPS-8X10HEPS-10X12HEPS-12X16
1/2 X 3/43/4 X 11 X 1-1/41-1/4 X 1-1/21-1/4 X 21-1/2 X 22 X 2-1/22-1/2 X 33 X 4
12.938.39
10.8411.3826.9022.1032.4740.4187.58
316 StainlessHESS-2X3HESS-3X4HESS-4X5HESS-4X6HESS-5X6HESS-5X8HESS-6X8HESS-8X10
1/2 X 3/43/4 X 11 X 1-1/41 X 1-1/21-1/4 X 1-1/21-1/4 X 21-1/2 X 22 X 2-1/2
33.4831.8971.7279.6982.9087.6895.66
119.55
MENDER
partnumberHCPS-2HCPS-3HCPS-4HCPS-5HCPS-6HCPS-8HCPS-10HCPS-12HCPS-16HCPS-20HCPS-24HCPS-32HCPS-40HCPS-48
1/23/411-1/41-1/222-1/2345681012
hosesize
listeach7.396.006.109.189.36
12.0922.6623.2841.33
135.3588.75
220.32381.53604.08
Plated Steel
316 StainlessHCSS-3HCSS-4HCSS-5HCSS-6HCSS-8HCSS-12HCSS-16HCSS-24
3/411-1/41-1/22346
57.9563.2968.1780.0482.36
186.61219.08896.02
BrassHCB-3HCB-4HCB-5HCB-6HCB-8
3/411-1/41-1/22
14.6815.1124.4639.7043.69
TOE NIPPLES AND REDUCING NIPPLES
TOE NIPPLES
partnumberRN-2SRN-2RN-3SRN-3RN-4RN-5RN-5LRN-6RN-6LRN-6XLRN-8RN-8LRN-8XLRN-10SRN-12RN-12LRN-12XLRN-16
1/2 X 1-1/21/2 X 23/4 X 1-1/23/4 X 21 X 21-1/4 X 21-1/4 X 2-1/21-1/2 X 21-1/2 X 2-1/21-1/2 X 32 X 22 X 2-1/22 X 32-1/2 X 2-1/23 X 33 X 3-1/23 X 44 X 4
npt xlength
listeach1.951.952.412.433.554.635.205.535.916.726.897.668.77
24.8827.9529.9633.2646.36
Steel
RNS-2SRNS-2RNS-3SRNS-3RNS-4RNS-5RNS-5LRNS-6RNS-6LRNS-6XLRNS-8RNS-8LRNS-8XLRNS-10SRNS-12RNS-12LRNS-12XL
1/2 X 1-1/21/2 X 23/4 X 1-1/23/4 X 21 X 21-1/4 X 21-1/4 X 2-1/21-1/2 X 21-1/2 X 2-1/21-1/2 X 32 X 22 X 2-1/22 X 32-1/2 X 2-1/23 X 33 X 3-1/23 X 4
9.019.399.569.78
14.1314.7315.9416.9917.2418.0423.0223.7528.0466.3170.6876.6389.40
304 Stainless
REDUCING NIPPLES
partnumberNS 3-2NS 4-3NS 5-4NS 6-5NS 8-6NS 10-8NS 12-8NS 12-10NS 16-12
3/4 X 1/21 X 3/41-1/4 X 11-1/2 X 1-1/42 X 1-1/22-1/2 X 23 X 23 X 2-1/24 X 3
npt xnpt
listeach9.62
10.3015.0916.3117.1534.3055.7437.7560.05
Steel
6
ASUCTION HOSE COUPLINGS
COMPLETE SET
partnumberCSB-5CSB-6CSB-8CSB-10CSB-12CSB-16CSB-24CSB-32
1-1/41-1/222-1/23468
hosesize
listeach45.3632.4541.8960.5571.90
115.74239.86802.05
Shanks: Plated SteelNut: Brass
FEMALE SHANK
partnumberFSB-5FSB-6FSB-8FSB-10FSB-12FSB-16FSB-24FSB-32
1-1/41-1/222-1/23468
hosesize
listeach27.3118.8021.3132.0039.9269.05
136.33599.56
Shank: Plated SteelNut: Brass
MALE SHANK
partnumberMS-5MS-6MS-8MS-10MS-12MS-16MS-24MS-32
1-1/41-1/222-1/23468
hosesize
listeach17.8513.2219.8828.6731.1045.41
100.68159.77
Plated Steel
IMPORT SUCTION HOSE COUPLINGS
COMPLETE SET
partnumberCAB-150CAB-200CAB-250CAB-300CAB-400CAB-600
1-1/222-1/2346
hosesize
listeach12.3218.2533.8438.0267.07
158.11
Shanks: AluminumNut: Brass
CBB-150CBB-200CBB-300CBB-400
1-1/2234
50.6871.99
160.27316.17
Shanks: BrassNut: Brass
FEMALE SHANK
partnumberFAB-150FAB-200FAB-250FAB-300FAB-400FAB-600
1-1/222-1/2346
hosesize
listeach8.61
12.5221.3325.5445.34
107.11
Shank: AluminumNut: Brass
FBB-150FBB-200FBB-300FBB-400
1-1/2234
25.1442.5389.80
162.21
Shank: BrassNut: Brass
MALE SHANK
partnumberMA-150MA-200MA-250MA-300MA-400MA-600
1-1/222-1/2346
hosesize
listeach4.526.30
11.5214.3424.0250.86
Aluminum
MB-150MB-200MB-300MB-400
1-1/2234
22.5632.7878.29
128.61
Brass
IMPORT SUCTION HOSE COUPLINGS (NST threads)
COMPLETE SET
partnumberNSTA-150NSTA-250
1-1/22-1/2
hosesize
listeach19.2836.95
Shanks: AluminumNut: Brass
NSTD-150NSTD-250
1-1/22-1/2
22.3659.13
Shanks: Ductile IronNut: Ductile Iron
NSTB-150NSTB-250
1-1/22-1/2
64.92142.15
Shanks: BrassNut: Brass
WASHER
partnumberWN-5WN-6WN-8WN-10WN-12WN-16WN-24WN-32
1-1/41-1/222-1/23468
hose size
listeach0.740.740.820.951.491.917.50
16.23
Neoprene (NPSM)
SPANNER WRENCH
partnumberSW-6SW-8SW-12SW-16SW-32SW-32
1-1/223468
sizelist
each10.0410.0412.0312.0357.2857.28
ADJUSTABLE HYDRANT WRENCH
partnumberAHW-1
listeach54.89
• Adjustable for 1-1/4” square nuts and pentagon hydrant nuts up to 1-3/4” point to flat.
• Spanner hook for 1-1/2” through 6” pin lug nuts.
• 18” overall length.
7
ROUND HOLE STEEL STRAINER
partnumberRHS-6RHS-8RHS-10RHS-12RHS-16RHS-24RHS-32
1-1/222-1/23468
npsmsize
listeach22.4025.5629.3435.0148.70
136.95304.36
FOOT VALVES& STRAINERS
SQUARE HOLE STEEL STRAINER
partnumberSHS-6SHS-8SHS-10SHS-12SHS-16SHS-24
1-1/222-1/2346
npsmsize
listeach22.6025.7029.5537.7652.54
147.76
TOP HOLESTEEL STRAINER
partnumberTHS-6THS-8THS-12
1-1/223
npsmsize
listeach65.3373.10
165.11
BOTTOM HOLESTEEL STRAINER
partnumberBHS-6BHS-8BHS-12
1-1/223
npsmsize
listeach70.3679.79
178.67
FOOT VALVE(painted cast iron)
partnumberFV-6FV-8FV-10FV-12FV-16FV-24FV-32
1-1/222-1/23468
nptsize
listeach32.5051.6261.0579.60
140.28339.62688.40
BALL & SOCKET COUPLINGS
FEMALE*(socket x machined hose end)
partnumberBFGS-8BFGS-12BFGS-16BFGS-24BFGS-32
23468
hosesize
listeach61.3286.26
110.70229.67410.45
*Sold without SBR ring gasket
BALL & SOCKET COMPLETE SET
partnumberBSGS-8BSGS-12BSGS-16BSGS-24BSGS-32
23468
hosesize
listeach
163.00245.00310.00625.00
1060.00
MALE(ball x machined hose end)
partnumberBMGS-8BMGS-12BMGS-16BMGS-24BMGS-32
23468
hosesize
listeach60.7785.22
105.09207.49363.73
RING GASKET
partnumberBSG-8BSG-12BSG-16BSG-24BSG-32
23468
hosesize
listeach5.086.155.97
11.6719.97
SBR
Foot Valve components are available upon request.
8
NEW!
PHONE 800-367-3678FAX [email protected]
BCampbell Fittings
9
c
Fittings for Critical Application or High Pressure Multi-Purpose Hose & Chemical Hose
Crimpnology Nipple
Smooth End Detail
Rounder Serrations
Sharper Serrations
Interlock Groove
Flanges meet ANSI/ASME B16.5 150 pound
class specifications.
Campbell Crimpnology™ offers crimping flexibility for your multi-purpose hose applications.
CRIMPNOLOGY NIPPLESFeatures & Benefits• Designed for use with Campbell
Interlocking Ferrules.• Fittings use the same ferrules as
Campbell COBRA Parts C and E, ChemJoint Couplings, and ContiTech Insta-Lock Cam & Groove Couplings to keep ferrule inventory low and flexible.
• Interlock groove on fitting locks ferrule into place for the ultimate in holding power.
• Campbell’s built in ferrule positioning stop eases and speeds crimping.
• Graduated serration pattern (sharper near the interlock, rounder near the end, with smooth end detail to reduce potential failure caused by abrasion) grips, seals, and protects hose.
• Shank and ferrule lengths are matched for performance and to avoid potential hose tube or cover damage.
• Crimped assemblies are low profile and eliminate sharp edges from band clamp buckles.
Special Features• Crimpnology Nipples provide an
excellent fitting solution for medium pressure applications such as “Frac Hose”, mud-pump hose, and other abusive applications.
• Long Shank Crimpnology Nipples provide excellent sealing and retention for high-pressure applications. (See ratings chart below)
• 206 Hose Union machined from forged steel, eliminates porosity.
B
CRIMPNOLOGY SWIVELFeatures & Benefits• 360° swivel rotation between the
threaded hex and hose barb for easy installation, eliminates hose kinking.
• Threaded body includes hex wrench-flats.
• Viton O-Ring and snap ring inside hex area.
SwivelHex Body
Crimpnology Swivel
MAX. SYSTEM WORKING PRESSURE (PSI @ 70°F) SEE NOTE 1
Hose System Components Hose SizeFitting/Coupling Attachment Hose Type 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4 6 8Crimpnology Nipple Ferrule Chem/Rubber - 500 350 325 300 275 250 250 225 175
Crimpnology Nipple Ferrule Soft - 200 175 150 150 125 100 75 50 20
Long Crimpnology Nipple Long Ferrule Rubber - - - 1000 1000 650 600 500 - -
Crimpnology Nipple Swivel Ferrule Chem/Rubber 500 500 - - - - - - - -
Long Crimpnology Nipple Swivel Long Ferrule Chem/Rubber - - 500 500 500 - - - - -
Crimpnology Flange (steel) Ferrule Chem/Rubber - - - 285 285 275 250 250 225 175
Crimpnology Flange (ss) Ferrule Chem/Rubber - - - 230 230 230 230 230 225 -
FRAC-16C Frac Ferrule Rubber - - - - - - - 400 - -
206 Hose Union (forged steel) Frac Ferrule Rubber - - - - - - - 400 - -
See footnotes 1, 2 and 4 on Page 1
NEW!
10
Note: Swivel is not for continuous rotation applications.
c
Fittings for Critical Application or High Pressure Multi-Purpose Hose & Chemical Hose B
THREADED
partnumberHAPS-4CHAPS-5CHAPS-6CHAPS-8CHAPS-10CHAPS-12CHAPS-16CHAPS-20CHAPS-24CHAPS-32C
11-1/41-1/222-1/234568
hosesize
listeach21.4023.9422.9227.2543.5551.9864.25POR
136.11274.60
Plated Steel
CRIMPNOLOGY NIPPLES
HASS-4CHASS-5CHASS-6CHASS-8CHASS-10CHASS-12CHASS-16CHASS-20CHASS-24CHASS-32C
11-1/41-1/222-1/234568
34.3848.8851.4863.68
110.59136.29201.42
POR744.70
POR
316 Stainless
HAHAST-4CHAHAST-6CHAHAST-8C
11-1/22
PORPORPOR
Hastelloy®
SQUARE CUT END
partnumberHAS-6C SQHAS-8C SQHAS-10C SQHAS-12C SQHAS-16C SQHAS-24C SQHAS-32C SQ
1-1/222-1/23468
hosesize
listeach23.2227.5541.8048.9661.92
112.12274.60
Steel
HASS-6C SQHASS-8C SQHASS-10C SQHASS-12C SQHASS-16C SQHASS-24C SQHASS-32C SQ
1-1/222-1/23468
54.8967.15
113.95140.55207.66781.87
POR
316 Stainless
GROOVED
partnumberHAGS-6CHAGS-8CHAGS-10CHAGS-12CHAGS-16CHAGS-24CHAGS-32C
1-1/222-1/23468
hosesize
listeach30.2836.3356.0765.1378.76
139.62POR
Steel
HAGSS-4CHAGSS-6CHAGSS-8CHAGSS-10CHAGSS-12CHAGSS-16CHAGSS-24CHAGSS-32C
11-1/222-1/23468
51.4465.7781.05
164.67192.69253.11787.95
POR
316 Stainless
206 HOSE UNION SET
partnumber206S-16C-4004
hosesize
listeach
281.30
Forged Steel
SCH. 80 THREADED LONG SHANK
partnumberHALPS-6CHALPS-8CHALPS-10CHALPS-12CHALPS-16C
1-1/222-1/234
hosesize
listeach38.1639.3066.1888.13
130.11
Steel
Stainless Steel206SS-16C-4004 1450.00
206 HOSE UNION - 2PC NUT(for field repair)
partnumber206N-16C 2 PC4
hosesize
listeach
138.05
Steel
MALE SWIVEL
partnumberHAPS-3C SWHAPS-4C SWHALPS-5C SWHALPS-6C SWHALPS-8C SW
3/411-1/41-1/22
hosesize
listeach72.2674.9195.92
126.76203.44
Steel
partnumberHASS-3C SWHASS-4C SWHALSS-5C SWHALSS-6C SWHALSS-8C SW
3/411-1/41-1/22
hosesize
listeachPORPORPORPORPOR
316 Stainless
SCH. 80 THREADED(for 400 psi frac hose)
partnumberFRAC-16C4
hosesize
listeach74.00
Steel
Use only heavy dutyFRAC ferrules
NEW!
11
NEW!
NEW!
NEW!
NEW!
NEW!
NEW!NEW!
NEW!
FF150SS-4FF150SS-6FF150SS-8FF150SS-10FF150SS-12FF150SS-16FF150SS-24FF150SS-32
11-1/222-1/23468
63.8285.16
119.35149.96171.08254.17379.13779.40
316 Stainless
FLANGE-THREADED(150lb.)
partnumberFT150S-6FT150S-8FT150S-10FT150S-12FT150S-16FT150S-24FT150S-32
1-1/222-1/23468
nptsize
listeach20.1848.5463.2056.1474.63
120.67321.37
Steel
FT150SS-4FT150SS-6FT150SS-8FT150SS-10FT150SS-12FT150SS-16FT150SS-24FT150SS-32
11-1/222-1/23468
63.82110.41119.95149.96167.33265.34357.26885.68
316 Stainless
FLANGE-SLIP ON(150lb.)
partnumberFS150S-6FS150S-8FS150S-10FS150S-12FS150S-16FS150S-24FS150S-32
1-1/222-1/23468
nptsize
listeach24.2233.2653.5939.9748.1170.73
138.97
Steel
FS150SS-4FS150SS-6FS150SS-8FS150SS-10FS150SS-12FS150SS-16FS150SS-24FS150SS-32
11-1/222-1/23468
54.8268.2479.73
116.88137.41159.42243.20546.55
316 Stainless
FLANGED (with 150lb. fixed flange)
partnumberFHAS-6CFHAS-8CFHAS-10CFHAS-12CFHAS-16CFHAS-24CFHAS-32C
1-1/222-1/23468
hosesize
listeach97.91
100.26178.94146.13181.25314.74530.00
Steel
FHASS-4CFHASS-6CFHASS-8CFHASS-10CFHASS-12CFHASS-16CFHASS-24CFHASS-32C
11-1/222-1/23468
234.67286.06304.82443.42489.72670.11
1065.00POR
316 Stainless
TURNBACK(for use with 150lb. floating flange)
partnumberTHAS-6CTHAS-8CTHAS-10CTHAS-12CTHAS-16CTHAS-24CTHAS-32C
1-1/222-1/23468
hosesize
listeach46.3251.0298.92
106.00167.66447.80627.90
Steel
THASS-4CTHASS-6CTHASS-8CTHASS-10CTHASS-12CTHASS-16CTHASS-24CTHASS-32C
11-1/222-1/23468
92.99103.19192.75258.44344.99466.62918.75
POR
316 Stainless
partnumber
hosesize
listeach
12
PHONE 800-367-3678FAX [email protected]
FLANGE-FLOATING(150lb.)
partnumberFF150S-6FF150S-8FF150S-10FF150S-12FF150S-16FF150S-24FF150S-32
1-1/222-1/23468
hosesize
listeach20.1741.5737.9739.9450.0579.16
229.65
Steel
CCampbell Fittings
13
Cam & Groove Couplings for Liquid, Bulk, and Chemical Transfer
Campbell Crimpnology™ offers crimping flexibility for your liquid, bulk, and chemical transfer hose applications.
byCampbell COBRA
Campbell Cobra Part C and matching Campbell Interlocking Ferrule
Locking Handle
Special Feature• Locking handles
can be purchased assembled onto the coupling or as a kit and retrofitted onto existing inventory ... another easy and cost-effective way to keep inventory flexible.
Ferrule zone:
3-15/16”
Ferrule length:
3-15/16”
“CAMPBELL COBRA” VS. “STANDARD COBRA”“COBRA” is the trade name for our entire line of Cam & Groove Couplings. “Campbell COBRA” is the upgraded version of Parts C and E. Although imported, Campbell COBRA C’s and E’s are designed by Campbell and produced to strict Campbell specifications.
Features & Benefits• Designed for use with Campbell
Interlocking Ferrules.• 360° interlock groove on fitting locks
ferrule into place for the ultimate in holding power.
• Shank and ferrule lengths are matched for performance and to avoid potential hose tube or hose cover damage. *See picture on right.
• Serrations designed to grip, seal, and protect hose when crimped. Note: Traditional “two bump” designs are for banding, not crimping. Campbell does not recommend crimping on “two bump” shanks.
• Crimped assemblies are low profile and eliminate sharp edges from band clamp buckles.
• Couplings use the same ferrules as Crimpnology Nipples, ChemJoint Couplings, and ContiTech Insta-Lock Cam & Groove Couplings to keep your inventory to keep ferrule inventory low and flexible.
• Designed to couple and interchange with couplings made to specifications: ASTM F1122, CID A-A-59326, MIL-C-27487.
Recommended Hose Attachment• Interlocking ferrules
Recommended Use• Multi-purpose liquid, chemical,
bulk handling
C
MAX. SYSTEM WORKING PRESSURE (PSI @ 70°F) SEE NOTE 1
Hose System Components Hose SizeFitting/Coupling Attachment Hose Type 1 1-1/4 1-1/2 2 2-1/2 3 4 6
Campbell Cobra SS C&G Ferrule Chem/Rubber 250 - 250 250 150 150 125 -
Campbell Cobra AL C&G Ferrule Chem/Rubber - - 250 200 150 125 75 call
See footnotes 1, 2 and 5 on Page 114
CCAMPBELL COBRA CAM & GROOVE COUPLINGS
PART C(with ferrule interlock)
partnumberC-316-100CC-316-150CC-316-200CC-316-250CC-316-300CC-316-400C
11-1/222-1/234
hosesize
listeach26.9050.7873.0697.11
129.30189.99
316 Stainless
C-AL-150CC-AL-200CC-AL-250CC-AL-300CC-AL-400CC-AL-600C
1-1/222-1/2346
12.8015.8021.1526.2936.34
115.76
Aluminum
C-BR-100CC-BR-150CC-BR-200CC-BR-300CC-BR-400C
11-1/2234
31.8347.8362.10
120.45167.58
Brass
C-S-100CC-S-150CC-S-200CC-S-300CC-S-400C
11-1/2234
23.0532.5238.3563.4298.54
Steel (investment cast)
PART C - LOCKING HANDLES(with ferrule interlock)
partnumberCL-316-100CCL-316-150CCL-316-200CCL-316-300CCL-316-400C
11-1/2234
hosesize
listeach56.6284.07
106.32181.49259.39
316 Stainless
CL-AL-150CCL-AL-200CCL-AL-300CCL-AL-400C
1-1/2234
68.6374.9292.49
103.56
Aluminum
PART E(with ferrule interlock)
partnumberE-316-100CE-316-150CE-316-200CE-316-250CE-316-300CE-316-400C
11-1/222-1/234
hosesize
listeach20.2739.6063.0984.61
110.59170.58
316 Stainless
E-AL-150CE-AL-200CE-AL-250CE-AL-300CE-AL-400CE-AL-600C
1-1/222-1/2346
6.388.28
13.4714.7824.2670.61
Aluminum
E-BR-100CE-BR-150CE-BR-200CE-BR-300CE-BR-400C
11-1/2234
21.4536.0250.1398.75
151.42
Brass
E-S-100CE-S-150CE-S-200CE-S-300CE-S-400C
11-1/2234
15.3120.0630.9054.2373.04
Steel (investment cast)
CONE STRAINERS(for use with Part C’s)
partnumberCGSS-8CGSS-12CGSS-16CGSS-24CGSS-32
23468
hosesize
listeach41.9535.3342.3765.05
117.85
Stainless
STANDARD COBRA CAM & GROOVE COUPLINGS
PART A
partnumberA-316-50A-316-75A-316-100A-316-125A-316-150A-316-200A-316-250A-316-300A-316-400A-316-500A-316-600A-316-800
1/23/411-1/41-1/222-1/234568
nptsize
listeach13.2313.2716.3723.3228.0733.1459.3564.65
122.20198.81248.72635.10
316 Stainless
A-SS-50A-SS-75A-SS-100A-SS-125A-SS-150A-SS-200A-SS-250A-SS-300A-SS-400A-SS-500A-SS-600A-SS-800
1/23/411-1/41-1/222-1/234568
10.2910.2812.3718.1820.9724.4443.5446.9892.84
157.26191.88492.77
304 Stainless
A-AL-50A-AL-75A-AL-100A-AL-125A-AL-150A-AL-200A-AL-250A-AL-300A-AL-400A-AL-500A-AL-600A-AL-800
1/23/411-1/41-1/222-1/234568
4.163.794.335.954.925.80
11.0910.6617.5736.7136.76
150.26
Aluminum
A-BR-50A-BR-75A-BR-100A-BR-125A-BR-150A-BR-200
1/23/411-1/41-1/22
10.4610.2711.6417.1218.0024.36
Brass
continued on next page
CAM & GROOVESIGHT GLASS
partnumberSGPC-200SGPC-300SGPC-400
234
sizelist
each76.25
110.75161.45
Polycarbonate
partnumber
hosesize
listeach
15
NEW!
A-DI-150A-DI-200A-DI-300A-DI-400A-DI-500
1-1/22345
14.9117.8927.9745.2261.53
Ductile Iron
A-PP-50A-PP-75A-PP-100A-PP-125A-PP-150A-PP-200A-PP-300A-PP-400
1/23/411-1/41-1/2234
2.362.362.794.244.285.058.96
21.75
Poly-Glass
PART B
partnumberB-316-50B-316-75B-316-100B-316-125B-316-150B-316-200B-316-250B-316-300B-316-400B-316-500B-316-600
1/23/411-1/41-1/222-1/23456
nptsize
listeach21.3821.4028.0939.9147.4856.3772.77
105.98160.09261.25358.85
316 Stainless
B-SS-50B-SS-75B-SS-100B-SS-125B-SS-150B-SS-200B-SS-250B-SS-300B-SS-400B-SS-500B-SS-600
1/23/411-1/41-1/222-1/23456
18.1718.1322.2130.9834.6242.8054.4578.68
118.81190.54264.20
304 Stainless
B-AL-50B-AL-75B-AL-100B-AL-125B-AL-150B-AL-200B-AL-250B-AL-300B-AL-400B-AL-500B-AL-600B-AL-800
1/23/411-1/41-1/222-1/234568
9.218.209.78
12.2711.5413.0421.9222.6628.5160.9368.73
295.44
Aluminum
B-BR-50B-BR-75B-BR-100B-BR-125B-BR-150B-BR-200B-BR-250B-BR-300B-BR-400B-BR-500B-BR-600
1/23/411-1/41-1/222-1/23456
18.8518.7422.6729.6932.1939.9756.8577.89
110.50271.64320.17
Brass
B-DI-150B-DI-200B-DI-300B-DI-400B-DI-500
1-1/22345
27.4428.6950.1967.4095.69
Ductile Iron
B-PP-50B-PP-75B-PP-100B-PP-125B-PP-150B-PP-200B-PP-300B-PP-400
1/23/411-1/41-1/2234
7.307.307.78
10.2811.4813.5222.1740.18
Poly-Glass
PART C(for use with sleeves or bands)
partnumberC-316-50C-316-75C-316-100C-316-125C-316-150C-316-200C-316-250C-316-300C-316-400C-316-500C-316-600
1/23/411-1/41-1/222-1/23456
hosesize
listeach21.1619.3425.1338.2340.2055.2182.5198.70
155.67340.96397.83
316 Stainless
C-AL-50C-AL-75C-AL-100C-AL-125C-AL-150C-AL-200C-AL-250C-AL-300C-AL-400C-AL-500C-AL-600C-AL-800
1/23/411-1/41-1/222-1/234568
7.227.188.55
12.7211.4313.4020.6923.9235.0965.2779.54
297.51
Aluminum
C-ALS-75C-ALS-100C-ALS-125C-ALS-150C-ALS-200C-ALS-250C-ALS-300C-ALS-400C-ALS-600
3/411-1/41-1/222-1/2346
6.968.28
12.3411.0912.9920.0723.2134.0477.15
Aluminum(with stainless handles)
C-BR-50C-BR-75C-BR-100C-BR-125C-BR-150C-BR-200C-BR-250C-BR-300C-BR-400C-BR-500C-BR-600
1/23/411-1/41-1/222-1/23456
17.7217.9624.9232.7733.7844.9358.9579.19
116.79281.67371.25
Brass
C-DI-150C-DI-200C-DI-300C-DI-400C-DI-500
1-1/22345
27.7032.6454.0179.98
123.87
Ductile Iron
C-PP-50C-PP-75C-PP-100C-PP-125C-PP-150C-PP-200C-PP-300C-PP-400
1/23/411-1/41-1/2234
7.547.548.57
10.9612.4814.6022.1741.88
Poly-Glass
B-ALS-75B-ALS-100B-ALS-125B-ALS-150B-ALS-200B-ALS-250B-ALS-300B-ALS-400B-ALS-600
3/411-1/41-1/222-1/2346
7.959.48
11.9111.1912.6421.2721.9827.6566.68
Aluminum(with stainless handles)
C-SS-50C-SS-75C-SS-100C-SS-125C-SS-150C-SS-200C-SS-250C-SS-300C-SS-400C-SS-500C-SS-600C-SS-800
1/23/411-1/41-1/222-1/234568
17.5715.7921.0931.3736.4647.9767.1692.55
135.65248.70292.25810.45
304 Stainlesspartnumber
nptsize
listeach part
numbernptsize
listeach
partnumber
nptsize
listeach
16
PHONE 800-367-3678FAX [email protected]
A-BR-250A-BR-300A-BR-400A-BR-500A-BR-600
2-1/23456
39.1347.0581.17
174.62233.19
PART A (continued from previous page)
CPART D
partnumberD-316-50D-316-75D-316-100D-316-125D-316-150D-316-200D-316-250D-316-300D-316-400D-316-500D-316-600
1/23/411-1/41-1/222-1/23456
nptsize
listeach21.4021.4028.0540.6049.4461.3887.78
110.84170.97317.86346.86
316 Stainless
D-SS-50D-SS-75D-SS-100D-SS-125D-SS-150D-SS-200D-SS-250D-SS-300D-SS-400D-SS-500D-SS-600
1/23/411-1/41-1/222-1/23456
18.4618.4622.2132.6939.1147.5367.5991.07
133.86225.09263.46
304 Stainless
D-AL-50D-AL-75D-AL-100D-AL-125D-AL-150D-AL-200D-AL-250D-AL-300D-AL-400D-AL-500D-AL-600D-AL-800
1/23/411-1/41-1/222-1/234568
10.488.579.78
13.3712.1514.2722.6923.0733.2062.4576.58
279.79
Aluminum
D-BR-50D-BR-75D-BR-100D-BR-125D-BR-150D-BR-200D-BR-250D-BR-300D-BR-400D-BR-500D-BR-600
1/23/411-1/41-1/222-1/23456
18.3018.7223.1234.3232.8840.7858.5674.07
116.28247.83333.64
Brass
D-DI-150D-DI-200D-DI-300D-DI-400D-DI-500
1-1/22345
27.7042.6952.5678.93
107.88
Ductile Iron
D-PP-50D-PP-75D-PP-100D-PP-125D-PP-150D-PP-200D-PP-300D-PP-400
1/23/411-1/41-1/2234
7.747.748.57
10.7211.8114.3924.9943.82
Poly-Glass
D-ALS-75D-ALS-100D-ALS-125D-ALS-150D-ALS-200D-ALS-250D-ALS-300D-ALS-400D-ALS-600
3/411-1/41-1/222-1/2346
8.329.48
12.9711.7813.8422.0122.3832.2174.28
Aluminum(with stainless handles)
PART E(for use with sleeves or bands)
partnumberE-316-50E-316-75E-316-100E-316-125E-316-150E-316-200E-316-250E-316-300E-316-400E-316-500E-316-600
1/23/411-1/41-1/222-1/23456
hosesize
listeach10.8311.6718.9727.5931.4547.4071.8895.73
145.77269.39360.87
316 Stainless
E-SS-50E-SS-75E-SS-100E-SS-125E-SS-150E-SS-200E-SS-250E-SS-300E-SS-400E-SS-500E-SS-600
1/23/411-1/41-1/222-1/23456
9.299.29
13.6419.9225.1037.6453.8777.20
117.93196.51261.40
304 Stainless
E-AL-50E-AL-75E-AL-100E-AL-125E-AL-150E-AL-200E-AL-250E-AL-300E-AL-400E-AL-500E-AL-600E-AL-800
1/23/411-1/41-1/222-1/234568
4.324.204.646.955.336.97
12.8314.2423.6549.8859.30
181.17
Aluminum
E-BR-50E-BR-75E-BR-100E-BR-125E-BR-150E-BR-200E-BR-250E-BR-300E-BR-400E-BR-500E-BR-600
1/23/411-1/41-1/222-1/23456
9.9913.0414.0419.7823.4933.6048.1763.84
104.31251.03329.91
Brass
E-DI-150E-DI-200E-DI-300E-DI-400E-DI-500
1-1/22345
16.0826.3146.1662.20
100.15
Ductile Iron
E-PP-50E-PP-75E-PP-100E-PP-125E-PP-150E-PP-200E-PP-300E-PP-400
1/23/411-1/41-1/2234
2.732.733.234.594.664.949.60
19.04
Poly-Glass
PART F
partnumberF-316-50F-316-75F-316-100F-316-125F-316-150F-316-200F-316-250F-316-300F-316-400F-316-500F-316-600
1/23/411-1/41-1/222-1/23456
nptsize
listeach14.6214.6221.4031.4437.6450.0271.5796.10
169.29274.47373.56
316 Stainless
F-SS-50F-SS-75F-SS-100F-SS-125F-SS-150F-SS-200F-SS-250F-SS-300F-SS-400F-SS-500F-SS-600
1/23/411-1/41-1/222-1/23456
13.4312.8416.2823.7529.6637.0351.3774.10
127.66200.56277.35
304 Stainless
partnumber
nptsize
listeach
partnumber
nptsize
listeach
17
continued on next page
F-AL-50F-AL-75F-AL-100F-AL-125F-AL-150F-AL-200F-AL-250F-AL-300F-AL-400F-AL-500F-AL-600F-AL-800
1/23/411-1/41-1/222-1/234568
5.714.695.008.216.217.34
14.5815.3522.0448.1854.11
210.34
Aluminum
F-BR-50F-BR-75F-BR-100F-BR-125F-BR-150F-BR-200F-BR-250F-BR-300F-BR-400F-BR-500F-BR-600
1/23/411-1/41-1/222-1/23456
11.7511.7514.6921.9923.0932.1351.7565.82
103.34212.96280.78
Brass
F-DI-150F-DI-200F-DI-300F-DI-400F-DI-500
1-1/22345
18.1523.0935.5156.3281.13
Ductile Iron
F-PP-50F-PP-75F-PP-100F-PP-125F-PP-150F-PP-200F-PP-300F-PP-400
1/23/411-1/41-1/2234
2.732.733.034.284.544.94
10.5519.04
Poly-Glass
PART DC
partnumberDC-316-50DC-316-75DC-316-100DC-316-125DC-316-150DC-316-200DC-316-250DC-316-300DC-316-400DC-316-500DC-316-600
1/23/411-1/41-1/222-1/23456
sizelist
each19.0619.1923.3231.7436.4644.1463.0384.14
116.16226.28300.66
316 Stainless
DC-SS-50DC-SS-75DC-SS-100DC-SS-125DC-SS-150DC-SS-200DC-SS-250DC-SS-300DC-SS-400DC-SS-500DC-SS-600
1/23/411-1/41-1/222-1/23456
14.9015.4918.1526.0627.6234.0948.2568.2093.72
171.36215.63
304 Stainless
DC-AL-50DC-AL-75DC-AL-100DC-AL-125DC-AL-150DC-AL-200DC-AL-250DC-AL-300DC-AL-400DC-AL-500DC-AL-600DC-AL-800
1/23/411-1/41-1/222-1/234568
7.267.908.33
13.5710.3711.9916.8419.9225.1542.6363.47
254.99
Aluminum
DC-BR-50DC-BR-75DC-BR-100DC-BR-125DC-BR-150DC-BR-200DC-BR-250DC-BR-300DC-BR-400DC-BR-500DC-BR-600
1/23/411-1/41-1/222-1/23456
16.6617.7721.2727.4429.8436.5144.5766.9990.20
207.95238.73
Brass
DC-DI-150DC-DI-200DC-DI-300DC-DI-400DC-DI-500
1-1/22345
23.3325.7141.6357.9688.29
Ductile Iron
DC-PP-50DC-PP-75DC-PP-100DC-PP-125DC-PP-150DC-PP-200DC-PP-300DC-PP-400
1/23/411-1/41-1/2234
7.367.367.98
10.2811.2713.5322.0035.99
Poly-Glass
DC-ALS-75DC-ALS-100DC-ALS-125DC-ALS-150DC-ALS-200DC-ALS-250DC-ALS-300DC-ALS-400DC-ALS-600
3/411-1/41-1/222-1/2346
7.658.07
13.1610.0711.6316.3419.3224.3961.56
Aluminum(with stainless handles)
PART DP
partnumberDP-316-50DP-316-75DP-316-100DP-316-125DP-316-150DP-316-200DP-316-250DP-316-300DP-316-400DP-316-600
1/23/411-1/41-1/222-1/2346
sizelist
each8.728.72
10.8618.4622.4433.5048.7156.2596.38
251.65
316 Stainless
DP-SS-50DP-SS-75DP-SS-100DP-SS-125DP-SS-150DP-SS-200DP-SS-250DP-SS-300DP-SS-400DP-SS-600
1/23/411-1/41-1/222-1/2346
8.726.938.33
14.6216.3724.3637.0342.0670.71
172.84
304 Stainless
DP-AL-50DP-AL-75DP-AL-100DP-AL-125DP-AL-150DP-AL-200DP-AL-250DP-AL-300DP-AL-400DP-AL-500DP-AL-600
1/23/411-1/41-1/222-1/23456
4.123.924.194.894.184.89
10.069.51
15.2427.9231.76
Aluminum
DP-BR-50DP-BR-75DP-BR-100DP-BR-125DP-BR-150DP-BR-200DP-BR-250DP-BR-300DP-BR-400DP-BR-500DP-BR-600
1/23/411-1/41-1/222-1/23456
10.2910.4012.7914.8615.1421.3829.6736.2955.10
143.94171.64
Brass
DP-DI-150DP-DI-200DP-DI-300DP-DI-400DP-DI-500
1-1/22345
12.9816.8522.9132.7954.89
Ductile Iron
DP-PP-50DP-PP-75DP-PP-100DP-PP-125DP-PP-150DP-PP-200DP-PP-300DP-PP-400
1/23/411-1/41-1/2234
2.662.552.773.163.354.278.24
14.90
Poly-Glass
partnumber
nptsize
listeach
partnumbersize
listeach
18
PHONE 800-367-3678FAX [email protected]
PART F (continued from previous page)
CTYPE A SWIVEL ADAPTER
partnumberASV-AL-300ASV-AL-400
34
nptsize
listeach
189.00288.75
Aluminum
TYPE D SWIVEL COUPLING
partnumberDSV-AL-300DSV-AL-400
34
nptsize
listeach
246.75367.50
Aluminum
SPOOL ADAPTER
partnumberAA-316-100AA-316-150AA-316-1520AA-316-200AA-316-2030AA-316-300AA-316-3040AA-316-400
1 X 11-1/2 X 1-1/21-1/2 X 22 X 22 X 33 X 33 X 44 X 4
adapterx adapter
listeach84.1089.96
107.24113.73146.90197.38241.10304.28
316 Stainless
AA-AL-100AA-AL-150AA-AL-200AA-AL-2030AA-AL-250AA-AL-300AA-AL-3040AA-AL-400AA-AL-4060AA-AL-600
1 X 11-1/2 X 1-1/22 X 22 X 32-1/2 X 2-1/23 X 33 X 44 X 44 X 66 X 6
14.2816.5818.7726.5027.5735.5346.3747.15
101.25101.27
Aluminum
AA-BR-150AA-BR-200AA-BR-250AA-BR-300AA-BR-400
1-1/2 X 1-1/22 X 22-1/2 X 2-1/23 X 34 X 4
65.6182.72
117.21140.85194.95
Brass
DOUBLE D
partnumberDD-316-150DD-316-200DD-316-300DD-316-400
1-1/2 X 1-1/22 X 23 X 34 X 4
couplersize
listeach
116.89150.83233.49314.52
316 Stainless
DD-AL-150DD-AL-200DD-AL-2030DD-AL-300DD-AL-3040DD-AL-400DD-AL-600
1-1/2 X 1-1/22 X 22 X 33 X 33 X 44 X 46 X 6
49.4355.18
85.1677.34
115.76102.78299.25
Aluminum
JUMP SIZE COUPLER XADAPTER
316 StainlesspartnumberDA-316-2015DA-316-3020DA-316-4030DA-316-6040
2 X 1-1/23 X 24 X 36 X 4
couplerx adapter
listeach
164.38170.14253.08453.98
DA-AL-1510DA-AL-1520DA-AL-2015DA-AL-2030DA-AL-2040DA-AL-3015DA-AL-3020DA-AL-3040DA-AL-4020DA-AL-4030DA-AL-4060DA-AL-6040
1-1/2 X 11-1/2 X 22 X 1-1/22 X 32 X 43 X 1-1/23 X 23 X 44 X 24 X 34 X 66 X 4
47.5551.4546.2343.9283.2364.4954.5670.5173.7868.87
138.14152.73
Aluminum
DA-BR-2030DA-BR-3020DA-BR-4020DA-BR-4030DA-BR-6040
2 X 33 X 24 X 24 X 36 X 4
161.55195.78273.29283.92476.89
Brass
JUMP SIZE A
partnumberA-AL-2030A-AL-3020A-AL-3040A-AL-4030A-AL-4060A-AL-6040
2 X 33 X 23 X 44 X 34 X 66 X 4
adapter xfemale npt
listeach36.9136.3962.5857.05
146.32146.32
Aluminum
JUMP SIZE B
partnumberB-AL-1510B-AL-2015B-AL-3020B-AL-3040B-AL-4030
1-1/2 X 12 X 1-1/23 X 23 X 44 X 3
coupler xmale npt
listeach68.9146.8948.6692.0490.89
Aluminum
JUMP SIZE C(for use with sleeves or bands)
AluminumpartnumberC-AL-3020C-AL-3040C-AL-4030
3 X 23 X 44 X 3
couplerx hose
listeach60.7292.6681.32
JUMP SIZE D
partnumberD-AL-1510D-AL-2015D-AL-3020D-AL-4030
1-1/2 X 12 X 1-1/23 X 24 X 3
coupler xfemale npt
listeach46.8446.8457.2987.10
Aluminum
JUMP SIZE E(for use with sleeves or bands)
AluminumpartnumberE-AL-2015E-AL-2025E-AL-2030E-AL-3020E-AL-3025E-AL-3040E-AL-4020E-AL-4030
2 X 1-1/22 X 2-1/22 X 33 X 23 X 2-1/23 X 44 X 24 X 3
adapter xhose
listeach15.1320.2122.6330.6533.1638.1735.3345.15
JUMP SIZE F
partnumberF-AL-3015F-AL-3020F-AL-3040
3 X 1-1/23 X 23 X 4
adapter xmale npt
listeach48.4446.6267.50
Aluminum
19
NEW!
NEW!
GASKET
partnumberBG-50BG-75BG-100BG-125BG-150BG-200BG-250BG-300BG-400BG-500BG-600BG-800
1/23/411-1/41-1/222-1/234568
sizelist
each0.710.710.710.800.800.800.951.021.433.583.85
17.93
Buna-N
VG-75VG-100VG-150VG-200VG-250VG-300VG-400
3/411-1/222-1/234
4.686.789.51
10.0913.5616.1024.21
Viton®
TG-100TG-150TG-200TG-250TG-300TG-400
11-1/222-1/234
38.4050.2156.9856.9865.0589.89
Teflon® (Teflon® Encapsulated Viton®)
HANDLE, RING AND PIN
partnumberHRPSS-75HRPSS-100HRPSS-200HRPSS-200HRPSS-200HRPSS-200HRPSS-300HRPSS-300HRPSS-300HRPSS-600HRPSS-600
3/411-1/41-1/222-1/234568
sizelist
each4.244.24
12.1012.1012.1012.1015.4515.4515.4542.6542.65
Ring/Pin: StainlessHandle: Investment CastStainless
HRPB-75HRPB-100HRPB-200HRPB-200HRPB-200HRPB-200HRPB-300HRPB-400HRPB-600HRPB-600
3/411-1/41-1/212-1/23468
3.865.696.276.276.276.278.488.48
35.9835.98
Ring/Pin: SteelHandle: Forged Brass
LOCKING HANDLE KIT
partnumberLHRPSS-100LHRPSS-200LHRPSS-200LHRPSS-200LHRPSS-250LHRPSS-300LHRPSS-300
11-1/41-1/222-1/234
sizelist
each18.3020.2020.2020.2020.2023.9823.98
Ring/Pin/Lock: StainlessHandle: Investment CastStainless
CAMLOCK LOCKPINS
partnumber
1/2 - 56 - 8
sizelist
each0.240.87
Plated Steel
C&G-LOCKPIN 2C&G-LOCKPIN 6
20
NEW!
PHONE 800-367-3678FAX [email protected]
DCampbell Fittings
21
c
Couplings for High-Pressure Air and Steam Hose
VITON® SEAL GROUND JOINT COUPLINGS,
AIR HAMMER COUPLINGS, AND MALE STEMSFeatures & Benefits• Viton® Seal Couplings pass 1000 hour MIL-H-29210 steam test.• Eliminates leaks with hand-tightened nut.• DuPont Viton® seal on hose stem is formulated for high pressure
steam and air applications. • Interchangeable with old-style ground joint couplings.• Machined from carbon steel, cast ductile iron (meets ASTM A395
specification), and 316 stainless steel. *See picture on right.
STAKED-ON FERRULE FOR STEAM HOSEFeatures & Benefits• Designed specifically for certain hose brands. Check with factory for information.• Viton® Seal Couplings pass 1000 hour MIL-H-29210 steam test.• Crimped steam assemblies eliminate the need for retightening bolts.• Eliminates leaks and cuts costs caused by leaky clamps.• Ferrule serrations bite to the wire achieving electrical continuity.• Meets 250 PSI pressure rating for steam applications.
SWIVEL INTERLOCKING MALE STEMFeatures & Benefits• Designed for use with steam.• Available with staked-on ferrule for crimped steam applications.
HEATWAVE GROUND JOINT COUPLING SYSTEMFeatures & Benefits• Engineered to solve hose retention safety issues created by excessively high temperatures.• One piece coupling/ferrule design.• Machined ferrule utilizes a wave pattern, which gently displaces the hose evenly while
pressing the tube into the coupling serrations. Recommended Use• Install one length of HeatWave Hose System at the compressor outlet to dissipate
heat. Then attach standard crimped air hoses from the HeatWave System to the tools. *See drawing below.
INTERLOCKING U-BOLT CLAMPSFeatures & Benefits• 360° design wraps completely around hose for superior retention.• Clamps fit hoses tightly without cracking, eliminating costly rework.• Bolts on “up side” allow easier tightening/retightening and improve “dragability”.• Field repairable.
Interlock Groove
Smooth End Detail
Viton O-RingStem
Permanently-attached Ferrule
Steam Hose
Spud
Low Profile Swivel Nut
D
The Wave
COMPRESSORTOOL
HeatWaveCouplings Viton® Seal Groud Joint Couplings & Ferrules
Campbell Crimpnology™ offers hose assembly systems for your high-pressure steam and air applications.
MAX. SYSTEM WORKING PRESSURE (PSI @ 70°F) SEE NOTE 1
Hose System Components Hose SizeFitting/Coupling Attachment Hose Type 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4
Viton® Ground Joint/Air Hammer/Male Stem U-Bolt Clamp Rubber/Steam 1500 1250 1250 1250 1250 1250 800 500 500
Viton® Ground Joint/Male Stem Staked-on Ferrule Steam 1250 1250 1250 - - call - call -
Viton® Ground Joint/Air Hammer/Male Stem Long Ferrule Rubber 1000 1000 1000 1000 1000 1000 650 500 500
HeatWave Coupling/HW Male Staked-on Ferrule Rubber - - - - - call - call -
See footnotes 1 and 2 on Page 122
NEW!
D
DISTRIBUTOR AUTHORIZATIONSafety is of paramount concern to everyone. Due to the volatile nature of compressed air and steam, and in accordance with our ISO 9001 quality system, we reserve the right to restrict sales of our Ground Joint Viton® Seal Couplings and U-Bolt Clamps to only those distributors authorized by Campbell Fittings. Please contact our Customer Service department for more information.
VITON® SEAL GROUND JOINT COUPLINGS
FEMALE SET(with low-profile nut)
partnumberRGJF-2RGJF-3RGJF-4RGJF-5RGJF-6RGJF-8RGJF-10RGJF-12RGJF-16
1/23/411-1/41-1/222-1/234
hosesize
listeach33.7042.3842.3875.0672.0386.76
227.17231.02523.98
Steel/Ductile Iron
RGJFSS-2RGJFSS-3RGJFSS-4
1/23/41
268.43278.48308.32
316 Stainless
FEMALE SET(with wing nut)
partnumberGJF-2GJF-3GJF-4GJF-5GJF-6GJF-8GJF-10GJF-12GJF-16
1/23/411-1/41-1/222-1/234
hosesize
listeach33.5441.9742.3875.0672.0388.44
224.96225.88494.72
Steel/Ductile Iron
VITON® SEAL HOSE STEM(staked-on ferrule & low profile nut)
partnumberRGJS-2**RGJS-3**RGJS-4**RGJS-6**RGJS-8**
1/23/411-1/22
hosesize
listeach
**********
Steel
VITON® SEAL HOSE STEM(staked-on ferrule & wing nut)
partnumber
hosesize
listeach
SteelINTERLOCKING MALE STEM
partnumberIMS-2IMS-2X3IMS-3X2IMS-3IMS-3X4IMS-4X3IMS-4
1/2 1/2 X 3/43/4 X 1/23/4 3/4 X 11 X 3/41
npt xhose
listeach6.77
15.3319.5310.3823.9123.4915.19
Steel
IMS-5IMS-6IMS-8IMS-10IMS-12IMS-16
1-1/41-1/222-1/234
24.0326.2736.5666.9691.33
160.73
Machined Ductile Iron
IMSS-2IMSS-3IMSS-4
1/23/41
66.1567.2068.25
316 Stainless
Viton® should never be used with ammonia.. Please contact
our Engineering department for information on all our different
gasket materials.
**Contact Customer Service for part numbers, prices, and availability
RGJSS-2**RGJSS-3**RGJSS-4**
1/23/41
******
316 Stainless
GJS-2**GJS-3**GJS-4**GJS-6**GJS-8**
1/23/411-1/22
**********
INTERLOCKING MALE STEM(with staked-on ferrule)
partnumberIMS-2**IMS-3**IMS-4**IMS-6**IMS-8**
1/23/411-1/22
hosesize
listeach
**********
Steel
IMSS-3**IMSS-4**
3/41
****
316 Stainless
SWIVEL MALE STEM(with staked-on ferrule for use with steam)
partnumberIMS-3**SWIMS-4**SW
3/41
hosesize
listeach
****
Steel
IMSS-3**SW3/4 **316 Stainless
SWIVEL MALE STEM(for use with steam)
partnumberIMS-3SW3/4
hosesize
listeach39.40
Plated Steel
MAX. SYSTEM WORKING PRESSURE (PSI @ 70°F) SEE NOTE 1
Hose System Components Hose SizeFitting/Coupling Attachment Hose Type 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4
Viton® Ground Joint/Air Hammer/Male Stem U-Bolt Clamp Rubber/Steam 1500 1250 1250 1250 1250 1250 800 500 500
Viton® Ground Joint/Male Stem Staked-on Ferrule Steam 1250 1250 1250 - - call - call -
Viton® Ground Joint/Air Hammer/Male Stem Long Ferrule Rubber 1000 1000 1000 1000 1000 1000 650 500 500
HeatWave Coupling/HW Male Staked-on Ferrule Rubber - - - - - call - call -
partnumberGJF-8 HWGJF-12 HW
23
hosesize
listeach
224.18518.17
Steel/Ductile Iron
HEATWAVE FEMALE SET (staked-on ferrule & wing nut)
HEATWAVE MALE STEM(with staked-on ferrule)
partnumberIMS-8 HWIMS-12 HW
23
hosesize
listeach
142.83383.63
Steel/Ductile Iron
23
NEW!
NEW!
NEW!
NEW!
NEW!
NEW!
NEW!
NEW!
VITON® SEAL MALE END(Viton® Seal x male npt)
partnumberGJMS-3GJMS-4GJMS-6GJMS-8
3/411-1/22
nptsize
listeach52.5952.5985.9492.43
Plated Steel
GJMSS-3GJMSS-4
3/41
143.82268.10
316 Stainless
VITON® SEAL FEMALE END(Viton® Seal x female npt)
partnumberGJFS-33/4
nptsize
listeach
107.85
Plated Steel
FEMALE SPUD
partnumberGFS-2GFS-3GFS-4
1/23/41
nptsize
listeach17.8714.1614.16
Steel
GFS-5GFS-6GFS-8GFS-8X3GFS-10GFS-12GFS-16
1-1/41-1/222 X 3/42-1/234
31.1129.4332.9154.6388.8477.83
168.78
Machined Ductile Iron
GFSS-2GFSS-3GFSS-4
1/23/41
81.5088.3290.00
316 Stainless
MALE SPUD
partnumberGMS-2GMS-3GMS-4
1/23/41
nptsize
listeach23.5922.2823.43
Steel
GMS-5GMS-6GMS-8GMS-10GMS-12
1-1/41-1/222-1/23
53.3251.3754.11
133.12140.55
Machined Ductile Iron
DOUBLE SPUD
partnumberGDS-2GDS-3GDS-3
1/23/41
sizelist
each38.7736.1436.14
Steel
GDS-5GDS-5GDS-8GDS-10GDS-12
1-1/41-1/222-1/23
64.6264.6264.54
137.32145.39
Machined Ductile Iron
SOCKET WELD SPUD
partnumberGWSS-3GWSS-4
3/41
sizelist
each88.3290.00
316 Stainless
LOW PROFILE NUT
partnumberRGN-2RGN-3RGN-3RGN-5RGN-5RGN-8RGN-10RGN-12RGN-16
1/23/411-1/4 1-1/222-1/234
sizelist
each5.799.449.44
14.6914.6916.4168.6459.79
169.62
Machined Ductile Iron
RGNSS-2RGNSS-3RGNSS-3
1/23/41
85.1895.7195.71
316 Stainless
WING NUT
partnumberGN-2GN-3GN-3GN-5GN-5GN-8GN-10GN-12GN-16
1/23/411-1/41-1/222-1/234
sizelist
each5.799.449.44
14.6914.6916.4168.6459.79
169.62
Machined Ductile Iron
DEAD-ENDpartnumberGDC-3GDC-3
3/41
sizelist
each55.8655.86
VITON® O-RINGpartnumberVO-2VO-3VO-3VO-5VO-5VO-8VO-10VO-12VO-16
1/23/411-1/41-1/222-1/234
sizelist
each1.021.191.192.192.193.034.636.377.04
All steel and machined ductile iron parts are zinc plated. DuPont Viton® is the best O-Ring material for couplings used in both Air and
Steam applications. For special applications, O-Rings of other
materials are available upon request.
VITON® SEAL HOSE STEM
partnumberGJS-2GJS-3GJS-4
1/23/41
hosesize
listeach10.3818.7318.73
Steel
GJS-5GJS-6GJS-8GJS-10GJS-12GJS-16
1-1/41-1/222-1/234
28.8829.5637.0761.7294.53
175.43
Machined Ductile Iron
GJSS-2GJSS-3GJSS-4
1/23/41
96.20103.20131.19
316 Stainless
24
PHONE 800-367-3678FAX [email protected]
DHEAVY DUTY VITON® SEAL AIR HAMMER COUPLINGS
FEMALE SET(with low profile nut)
3/41
hosesize
Steel/Ductile Iron
FEMALE SET(with wing nut)
3/41
hosesize
Steel/Ductile Iron
partnumberRHJF-3RHJF-4
listeach59.3654.44
partnumberHJF-3HJF-4
listeach62.3354.44
HOSE STEM
3/41
hosesize
SteelpartnumberHJS-3HJS-4
listeach20.9717.40
FEMALE SPUD
partnumberHFS-3HFS-4
3/41
nptsize
listeach26.2423.12
Steel
MALE SPUD
partnumberHMS-3HMS-4
3/41
nptsize
listeach37.1134.84
Steel
LOW PROFILE SWIVEL NUT
partnumberRHN-3RHN-3
3/41
sizelist
each14.8914.89
Ductile Iron
WING NUT
partnumberHN-3HN-3
3/41
sizelist
each13.9213.92
Ductile Iron
DOUBLE SPUD
partnumberHDS-3HDS-3
3/41
sizelist
each34.3934.39
Steel
25
CASTING•
HOSE•
FITTING•
LINER•
U-BOLT
This 2” 1000 psi rated hose exploded in a test at 5200 psi. The hose exceeded its minimum 4X safety factor. The fitting and clamp exceeded the capacity of the hose.
INTERLOCKING U-BOLT CLAMPS SINGLE U-BOLT
13/161-1/161-3/32
hoseo.d. min
listeach8.49
10.9910.99
partnumberIC-2IC-3SIC-3
1-1/321-1/41-3/8
hoseo.d. max
1/23/43/4
hosesize
DOUBLE U-BOLT
1-5/161-1/21-9/161-15/162-3/162-11/322-11/1633-9/32
hoseo.d. min
listeach18.6718.9431.0326.2528.6239.5035.8652.6867.49
partnumberIC-4IC-4LIC-5IC-6IC-6LIC-8IC-8LIC-10IC-10L
1-1/21-11/1622-3/162-3/82-11/162-15/163-9/323-9/16
hoseo.d. max
111-1/41-1/21-1/2222-1/22-1/2
hosesize
TRIPLE U-BOLT
3-5/163-11/164-1/164-5/164-11/165-1/167-11/16
hoseo.d. min
listeach77.5983.63
116.67221.87232.34381.01420.23
partnumberIC-12SIC-12IC-12LIC-16SIC-16IC-16LIC-24L
3-3/44-1/84-1/24-3/45-1/85-1/28-1/4
hoseo.d. max
3334446
hosesize
For your convenience, U-Bolts are available in bulk packages, upon request. Bulk package price is the same as listed above. (IC-2 through IC-4L are packed 25 per carton. IC-5 through IC-8L are packed 10 per carton.)
26
PHONE 800-367-3678FAX [email protected]
WHIP CHEK™ SAFETY CABLE(hose to hose)
listeach26.0826.0826.0840.7440.7440.7440.7499.17
partnumberWC-1WC-1WC-1WC-2WC-2WC-2WC-2WC-4
1/23/411-1/41-1/2234
hosesize
ECampbell Fittings
27
c
Couplings & Safety Couplings for Air and Water Hose
CAMPBELL SINGLE-LOCK (Bowes-style) DOUBLE-LOCK (Thor-style) COUPLINGS
Features and Benefits• High strength zinc-aluminum
alloy sleeves never rust, never seize or gall.
• Crimpnology hose ends provide the ultimate in hose retention.
• Interchangeable with other Bowes and Thor style couplings.
CAMPBELL SINGLE-LOCK (Nitrogen) DOUBLE-LOCK (Nitrogen) COUPLINGS
Features and Benefits• High strength zinc-aluminum
alloy sleeves never rust, never seize or gall.
• Crimpnology hose ends provide the ultimate in hose retention..
• Interchangeable with other Bowes and Thor style couplings.
UNIVERSAL COUPLINGS AND UNIVERSALOCK™ COUPLINGS
Features and Benefits• Mates with domestic and
imported Universal Couplings.• UniversaLock’s automatically
lock onto mating coupling.• Crimpnology hose end for
superior retention and sealing.• Cast ductile iron meets
ASTM A536 specification.• Washers manufactured from
nitrile for superior oil resistance.
Investment Cast Universal Hose Ends• Investment casting provides
a crisp, high quality, hose-end surface-finish, without costly machining.
• Crimpnology hose ends for superior retention and sealing.
Nitrogen Kills!
Nitrogen-only Single-Lock and Double-Lock Couplings.
Specify the patented yellow ring!
Simply the best and safest way to avoid deadly nitrogen
accidents in plants.
Campbell Crimpnology™ offers hose assembly systems for all your air applications.
SAFETY AND SAVINGS!
UniversaLock™, Single-Lock and Double-Lock couplings meet
OSHA regulation 29CFR1915.131 and MSHA 30 CFR65.13021
requirements for Air Hose Couplings. The fine for an
unpinned/unlocked air hose coupling can be $800 or more
per infraction. Save your customer money and headaches,
by using Campbell’s Safety Air Hose Couplings.
Investment Cast Universal Hose Ends:
E
MAX. SYSTEM WORKING PRESSURE (PSI @ 70°F) SEE NOTE 1
Hose System Components Hose SizeFitting/Coupling Attachment Hose Type 1/2 3/4 1
UniversaLock™ Ferrule Air 300* 300* 300*
Universal Ferrule Air 150 150 150
Single-Lock Cplg Ferrule Air 300 300 300
Double-Lock Cplg Ferrule Air 300 300 300
See footnotes 1, 2 and 6 on Page 1*Only when connected to another UniversaLock coupling
UL RECOGNIZED
Patent no. 5,779,277
28
Patented Nitrogen Ring
Short, Crimp Specific Shank
Standard Shank
c
UNIVERSAL COUPLINGS(includes safety clip)
HOSE END
Ductile Iron (machined serrations)
partnumberUH-38UH-2UH-58UH-3UH-4
3/81/25/83/41
hosesize
listeach10.747.59
10.887.61
10.68
ctnqty2525252525
Plated Steel(investment cast)
UH-2iUH-3iUH-4i
1/23/41
5.825.927.70
252525
316 Stainless(machined serrations)
UHSS-2UHSS-3UHSS-4
1/23/41
57.9148.6753.82
252525
HOSE END (crimp specific)
Plated Steel(investment cast)
partnumberUH-3C3/4
hosesize
listeach5.19
ctnqty25
FEMALE NPT
Ductile IronpartnumberUF-38UF-2UF-3UF-4
3/81/23/41
nptsize
listeach9.548.768.56
10.62
ctnqty25252525
316 StainlessUFSS-2UFSS-3UFSS-4
1/23/41
60.2452.2156.24
252525
MALE NPT
Ductile IronpartnumberUM-38UM-2UM-3UM-4
3/81/23/41
nptsize
listeach9.358.458.659.20
ctnqty25252525
316 StainlessUMSS-2UMSS-3UMSS-4
1/23/41
60.2452.2156.24
252525
IMPORT DUCTILE IRONUNIVERSAL COUPLINGS(includes safety clip)
HOSE ENDpartnumberHE-37HE-50HE-75HE-100
3/81/23/41
hosesize
listeach4.074.074.445.61
FEMALE NPTpartnumberFE-25FE-37FE-50FE-75FE-100
1/43/81/23/41
nptsize
listeach4.974.974.754.875.51
MALE NPTpartnumberME-25ME-37ME-50ME-75ME-100
1/43/81/23/41
nptsize
listeach4.734.734.524.645.45
UNIVERSAL WASHER
NitrilepartnumberUGAll
sizelist
each0.75
ctnqty25
CLIP
partnumberCLIPAll
sizelist
each0.37
ctnqty25
E
ctnqty2525252525
ctnqty25252525
ctnqty2525252525
HOSE END
Ductile Iron (machined serrations)
partnumberULH-2ULH-3ULH-4
1/23/41
hosesize
listeach29.1929.1929.76
ctnqty101010
MALE END
Ductile Iron partnumberULM-2ULM-3ULM-4
1/23/41
nptsize
listeach29.1929.1929.76
ctnqty101010
FEMALE END
Ductile Iron partnumberULF-2ULF-3
1/23/4
nptsize
listeach29.1929.19
ctnqty1010
UNIVERSALOCK™ WASHER
NitrilepartnumberULWAll
sizelist
each2.75
ctnqty25
Never use UniversaLock™ Washers in standard Universal Couplings.
DISTRIBUTOR AUTHORIZATIONSafety is of paramount concern to everyone. Due to the volatile nature of compressed air, and in accordance with our ISO 9001 quality system, we reserve the right to restrict sales of our UniversaLock® Couplings to only those distributors authorized by Campbell Fittings.
Please contact our Customer Service department for more information.
UNIVERSALOCK™ COUPLINGS
29
Plated Steel
SINGLE-LOCK COUPLINGS (Bowes interchange)
MALE X HOSE
partnumberBMHS-2BMHS-3
1/23/4
hosesize
listeach23.8823.88
Plated Steel
BMHB-2BMHB-3
1/23/4
40.2140.21
Brass
MALE X MALE NPT
partnumberBMMS-2BMMS-3
1/23/4
nptsize
listeach24.6824.68
Plated Steel
BMMB-2BMMB-3
1/23/4
36.0736.07
Brass
MALE X FEMALE NPT
partnumberBMFS-2BMFS-3
1/23/4
nptsize
listeach23.8823.88
Plated Steel
BMFB-2BMFB-3
1/23/4
37.6137.61
Brass
FEMALE X HOSE
partnumberBFHS-2BFHS-3
1/23/4
hosesize
listeach19.3519.35
Plated Steel
BFHB-2BFHB-3
1/23/4
28.9428.94
Brass
FEMALE X MALE NPT
partnumberBFMS-2BFMS-3BFMS-4
1/23/41
nptsize
listeach19.3519.3522.22
Plated Steel
BFMB-2BFMB-3BFMB-4
1/23/41
28.9428.9433.28
Brass
FEMALE X FEMALE NPT
partnumberBFFS-2BFFS-3BFFS-4
1/23/41
nptsize
listeach19.3519.3522.22
Plated Steel
BFFB-2BFFB-3BFFB-4
1/23/41
28.9428.9433.28
Brass
MALE X HOSE(with locking ring)
partnumberBMHS-2LBMHS-3LBMHS-4L
1/23/41
hosesize
listeach32.7232.7236.65
Plated Steel
BMHB-2LBMHB-3LBMHB-4L
1/23/41
43.8643.8649.43
Brass
MALE X MALE NPT(with locking ring)
partnumberBMMS-2LBMMS-3LBMMS-4L
1/23/41
nptsize
listeach32.7232.7237.62
Plated Steel
BMMB-2LBMMB-3LBMMB-4L
1/23/41
43.8643.8649.43
Brass
MALE X FEMALE NPT(with locking ring)
partnumberBMFS-2LBMFS-3LBMFS-4L
1/23/41
nptsize
listeach32.7232.7237.62
Plated Steel
BMFB-2LBMFB-3LBMFB-4L
1/23/41
43.8643.8649.43
Brass
GASKET
partnumberBGN-1ALL
sizelist
each1.39
Nitrile
DISTRIBUTOR AUTHORIZATIONSafety is of paramount concern to everyone. Due to the volatile nature of Nitrogen, and in accordance with our ISO 9001 quality system, we reserve the right to restrict sales of our Nitrogen Couplings to only those distributors authorized by Campbell Fittings.
Please contact our Customer Service department for more information.
SINGLE-LOCK COUPLINGS (for Nitrogen use only)
MALE X HOSE(with Nitrogen ring)
partnumberBMHS-2NBMHS-3NBMHS-4N
1/23/41
hosesize
listeach32.7232.7236.65
Plated Steel
BMHB-2NBMHB-3NBMHB-4N
1/23/41
43.8643.8649.43
Brass
30
PHONE 800-367-3678FAX [email protected]
EMALE X MALE NPT(with Nitrogen ring)
partnumberBMMS-2NBMMS-3NBMMS-4N
1/23/41
nptsize
listeach32.7232.7237.62
Plated Steel
BMMB-2NBMMB-3NBMMB-4N
1/23/41
32.7232.7249.43
Brass
MALE X FEMALE NPT(with Nitrogen ring)
partnumberBMFS-2NBMFS-3NBMFS-4N
1/23/41
nptsize
listeach32.7232.7237.62
Plated Steel
BMFB-2NBMFB-3NBMFB-4N
1/23/41
43.8643.8649.43
Brass
FEMALE X HOSE(with Nitrogen ring)
partnumberBFHS-2NBFHS-3N
1/23/4
hosesize
listeach19.3519.35
Plated Steel
BFHB-2NBFHB-3N
1/23/4
28.9428.94
Brass
FEMALE X MALE NPT(with Nitrogen ring)
partnumberBFMS-2NBFMS-3N
1/23/4
hosesize
listeach19.3519.35
Plated Steel
BFMB-2NBFMB-3N
1/23/4
28.9428.94
Brass
FEMALE X FEMALE NPT(with Nitrogen ring)
partnumberBFFS-2NBFFS-3N
1/23/4
hosesize
listeach19.3519.35
Plated Steel
BFFB-2NBFFB-3N
1/23/4
28.9428.94
Brass
DOUBLE-LOCK COUPLINGS (Thor interchange)
HOSE END
partnumberTLH-2TLH-3TLH-4
1/23/41
hosesize
listeach35.2337.2256.71
Plated Steel
TLHSS-33/4 315.45Stainless
TLHB-33/4 82.73Brass
MALE NPT
partnumberTLM-2TLM-3
1/23/4
nptsize
listeach33.1533.15
Plated Steel
TLMSS-33/4 279.64Stainless
FEMALE NPT
partnumberTLF-2TLF-3
1/23/4
nptsize
listeach37.9637.96
Plated Steel
TLFSS-33/4 279.64Stainless
MALE NPT(without locking sleeve)
partnumberTM-2TM-3TM-4
1/23/41
nptsize
listeach19.3520.3222.78
Plated Steel
TMSS-33/4 138.73Stainless
FEMALE NPT(without locking sleeve)
partnumberTF-2TF-3TF-4
1/23/41
nptsize
listeach24.6324.7426.94
Plated Steel
TFSS-33/4 138.73Stainless
FEMALE NPT(with locking ring)
partnumberTLF-2LTLF-3LTLF-4L
1/23/41
hosesize
listeach50.4950.4961.60
Plated Steel
HOSE END(with locking ring)
partnumberTLH-2LTLH-3LTLH-4L
1/23/41
hosesize
listeach46.8649.5075.42
Plated Steel
MALE NPT(with locking ring)
partnumberTLM-2LTLM-3LTLM-4L
1/23/41
hosesize
listeach44.0944.0961.60
Plated Steel
31
NEW!
NEW!
NEW!
NEW!
NEW!
NEW!
NEW!
DOUBLE-LOCK COUPLINGS (for Nitrogen use only)
DISTRIBUTOR AUTHORIZATIONSafety is of paramount concern to everyone. Due to the volatile nature of Nitrogen, and in accordance with our ISO 9001 quality system, we reserve the right to restrict sales of our Nitrogen Couplings to only those distributors authorized by Campbell Fittings.
Please contact our Customer Service department for more information.
HOSE END(with Nitrogen ring)
partnumberTLH-2NTLH-3NTLH-4N
1/23/41
hosesize
listeach46.8649.5075.42
Plated Steel
TLHB-3N3/4 103.25Brass
MALE NPT(with Nitrogen ring)
partnumberTLM-2NTLM-3NTLM-4N
1/23/41
hosesize
listeach44.0944.0961.60
Plated Steel
FEMALE NPT(with Nitrogen ring)
partnumberTLF-2NTLF-3NTLF-4N
1/23/41
hosesize
listeach50.4950.4961.60
Plated Steel
MALE NPT(with Nitrogen ring &without locking sleeve)
partnumberTM-2NTM-3NTM-4N
1/23/41
nptsize
listeach24.19 25.40 28.48
Plated Steel
FEMALE NPT(with Nitrogen ring &without locking sleeve)
partnumberTF-2NTF-3NTF-4N
1/23/41
nptsize
listeach
30.79 30.93 33.68
Plated Steel
GASKET
partnumberTGN-1ALL
sizelist
each2.63
Nitrile
32
NEW!
NEW!
PHONE 800-367-3678FAX [email protected]
NEW!
NEW!
NEW!
FCampbell Fittings
33
c
CHEMJOINT™ COUPLINGS & MALE STEMS
DescriptionChemJoint™ Couplings and Male Stems create an extremely versatile Chemical Hose assembly system. The system solves problematic Cam and Groove issues such as pressure, temperature, side load, viscosity, line dedication and ergonomics.
Features and Benefits• Graduated serration pattern
- sharper near the interlock, rounder near the end. Grips and seals plastic lined Chemical Hose without cutting through the tube.
• 360° interlock groove on fitting locks ferrule into place for the ultimate in holding power.
• Crimped assemblies are low profile and eliminate sharp edges from bands.
• Viton® Seal allows coupling to meet pressure ratings with hand-tightened nut.
Recommended Hose Attachment• Interlocking ferrules• Preformed bands
Fittings & Couplings for High, Medium, and Low Pressure Chemical Hose
Campbell Crimpnology™ offers hose assembly systems for all your chemical applications!
1” ChemJoint™ Coupling Set
ChemJoint Couplings are available with weld ends for
use with metal hose.
F
MAX. SYSTEM WORKING PRESSURE (PSI @ 70°F) SEE NOTE 1
Hose System Components Hose SizeFitting/Coupling Attachment Hose Type 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4
ChemJoint™/Male Stem Ferrule Chemical 350 400 450 325 250 250 225 225 200
ChemJoint™/Male Stem Ferrule Rubber 350 400 450 425 400 350 325 300 250
See footnotes 1 and 2 on Page 1
34
1” ChemJoint™ Union with Viton® Spud
c
CHEMJOINT™ COUPLINGS
DISTRIBUTOR AUTHORIZATION
Safety is of paramount concern to everyone. Due to the volatile nature of chemical hose applications, and in accordance with our ISO 9001 system, we reserve the right to restrict sales of our ChemJoint™ Couplings and Male Stems to only those distributors authorized by Campbell Fittings.
Please contact our Customer Service department for more information
CHEMJOINT™ MALE STEM
316 Stainless
1/23/411-1/41-1/222-1/234
CJMS-2CJMS-3CJMS-4CJMS-5CJMS-6CJMS-8CJMS-10CJMS-12CJMS-16
43.7943.7952.5361.2868.2875.29
119.08153.70227.10
hose size
partnumber
listeach
3/411-1/223
CJSS-3CJSS-4CJSS-6CJSS-8CJSS-12
337.93337.93418.50569.07
1024.32
hose size
partnumber
listeach
CHEMJOINT™ FEMALE VITON® SPUD
3/411-1/223
CJVS-3CJVS-4CJVS-6CJVS-8CJVS-12
131.33131.33193.10262.65507.78
nptsize
partnumber
listeach
316 Stainless
316 Stainless
316 Stainless with ACME threads123
CJVS-4ACJVS-8ACJVS-12A
165.90326.55633.94
CHEMJOINT™ HOSE STEM
316 Stainless
3/411-1/223
CJHS-3CJHS-4CJHS-6CJHS-8CJHS-12
113.82113.82117.07122.57169.82
hose size
partnumber
listeach
CHEMJOINT™ WELD-ON STEM
316 Stainless
11-1/223
CJWS-4CJWS-6CJWS-8CJWS-12
105.08108.09113.82140.07
sizepartnumber
listeach
CHEMJOINT™ MALE THREADED STEM
316 Stainless
11-1/223
CJTS-4CJTS-6CJTS-8CJTS-12
113.82117.07122.57169.82
nptsize
partnumber
listeach
CHEMJOINT™ UNION WITH VITON® SPUD
316 Stainless
3/411-1/223
CJFU-3CJFU-4CJFU-6CJFU-8CJFU-12
569.07627.10718.15831.71
1120.63
nptsize
partnumber
listeach
CHEMJOINT™ COUPLING FEMALE SET
F
MAX. SYSTEM WORKING PRESSURE (PSI @ 70°F) SEE NOTE 1
Hose System Components Hose SizeFitting/Coupling Attachment Hose Type 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4
ChemJoint™/Male Stem Ferrule Chemical 350 400 450 325 250 250 225 225 200
ChemJoint™/Male Stem Ferrule Rubber 350 400 450 425 400 350 325 300 250
35
Viton® should never be used with ammonia.. Please contact
our Engineering department for information on all our different
gasket materials.
NEW!
CHEMJOINT™ UNION (without Viton® Spud)
316 Stainless
3/411-1/223
CJFS-3CJFS-4CJFS-6CJFS-8CJFS-12
437.77495.27525.27569.07612.84
nptsize
partnumber
listeach
316 Stainless with ACME threads
123
CJFS-4ACJFS-8ACJFS-12A
620.55664.65722.55
npt size
partnumber
listeach
CHEMJOINT™ NUT
316 Stainless
3/411-1/223
CJN-3CJN-3CJN-6CJN-8CJN-12
89.4589.45
156.72183.83346.70
sizepartnumber
listeach
316 Stainless with ACME threads
123
CJN-4ACJN-8ACJN-12A
108.15196.35398.71
npt size
partnumber
listeach
CHEMJOINT™ DUST CAP
316 Stainless
3/411-1/223
CJDC-3CJDC-3CJDC-6CJDC-8CJDC-12
87.5587.55
155.12175.12350.21
sizepartnumber
listeach
316 Stainless with ACME threads
123
CJDC-4ACJDC-8ACJDC-12A
131.25182.70446.25
npt size
partnumber
listeach
CHEMJOINT™ VITON® SEAL DUST PLUG
316 Stainless
3/411-1/223
CJDP-3CJDP-3CJDP-6CJDP-8CJDP-12
125.11125.11210.18318.66573.95
sizepartnumber
listeach
316 Stainless with ACME threads
123
CJDP-4ACJDP-8ACJDP-12A
173.25392.70656.25
npt size
partnumber
listeach
36
PHONE 800-367-3678FAX [email protected]
NEW!
NEW!
NEW!
NEW!
GCampbell Fittings
37
c
Campbell Crimpnology™ offers hose assembly systems for all your food grade hose applications!
Campbell Sanitary serration pattern
Ferrule interlock groove (for standard ferrules or machined ferrules)
Ferrule stopBumper location
Tri-Clamp end
TESTINGAll Campbell products are thoroughly tested to determine accurate performance data, such as pressure ratings and temperature derating data. See example of Tri-Clamp hydrostatic test below.
Hose: 1” ContiTech Grey VintnerWorking Pressure: 250 psiTest temp: 70°FHighest Test Pressure: 2039 psi.Failure Mode: Hose burst beyond 8x WP
Sanitary and PCT Couplings for Food and Beverage
CRIMPNOLOGYTRI-CLAMP FITTINGSFeatures & Benefits
• Crimp specs and procedures provided for all styles.
• For use with both Campbell standard slotted ferrules or I.D./O.D. machined ferules.
• All ferrules are FDA approved 304 Stainless Steel.
• Shank and ferrule lengths are matched for performance and to avoid potential hose tube or hose cover damage.
• FDA approved Bumper helps to protect Tri-Clamp fitting.
• Recessed bumper area machined onto fitting allows easy installation or removal, even when in use.
TRI-CLAMP GASKETSFeatures & Benefits• Available in both Buna-N and
reinforced silicone.• Reinforced silicone offers superior
sealing capabilities.
TRI-CLAMPSFeatures & Benefits• Designed for use with any
Tri-Clamp fitting.
PROTECTIVE BUMPERFeatures & Benefits• Fits into machined recessed
bumper area on all Campbell Tri-Clamp and Wine Fittings.
• Easy on/off installation.• Manufactured from FDA
approved silicone.
CRIMPNOLOGYWINE FITTINGS(with Pacific Coast Threads - PCT)Features & Benefits• Crimp specs and procedures
provided for all styles.• For use with Campbell ferrules and
sleeves or band clamps.• All ferrules and sleeves are FDA
approved 304 Stainless Steel.• Shank and ferrule lengths are
matched for performance and to avoid potential hose tube or hose cover damage.
• Durable heavy duty forged brass Swivel Nut is damage resistant.
G
MAX. SYSTEM WORKING PRESSURE (PSI @ 70°F) SEE NOTE 1
Hose System Componenets Hose SizeFitting/Coupling Attachment Hose Type 1 1-1/4 1-1/2 2 2-1/2 3
Tri-Clamp Ferrule Sanitary 500 - 450 350 325 300
Tri-Clamp Mach. Ferrule Sanitary 500 - 500 400 375 350
Wine Fitting Ferrule Sanitary - - 450 350 - 300
Wine Fitting Band Clamps Sanitary - - 100 100 - 50
See footnotes 1 and 2 on Page 1
NEW!
38
TRI-CLAMP FITTINGS
304 Stainless
11-1/222-1/23
TC-4CTC-6CTC-8CTC-10CTC-12C
60.9172.42
117.42163.64236.36
hose size
partnumber
listeach
316 Stainless11-1/222-1/23
TC-4C 316TC-6C 316TC-8C 316TC-10C 316TC-12C 316
71.2178.03
135.45204.35287.88
TRI-CLAMP REDUCERS
304 Stainless
1-1/2 X 1 TCR-6X4C 60.19
hose size
partnumber
listeach
316 Stainless1-1/2 X 1 TCR-6X4C 316 71.21
TRI-CLAMP BUMPERS
Silicone
11-1/222-1/23
TCB-4TCB-6TCB-8TCB-10TCB-12
2.943.885.548.97
10.64
hose size
partnumber
listeach
TRI-CLAMP GASKET
Buna-N
11-1/222-1/23
TCGB-4TCGB-6TCGB-8TCGB-10TCGB-12
1.341.151.031.591.77
hose size
partnumber
listeach
Reinforced Silicone11-1/222-1/23
TCGS-4TCGS-6TCGS-8TCGS-10TGGS-12
4.094.284.095.696.08
MACHINED FERRULES
304 Stainless
11111-1/21-1/21-1/21-1/222222-1/22-1/22-1/233333
SAN100132SAN100138SAN100144SAN100150SAN150204SAN150210SAN150216SAN150220SAN200240SAN200244SAN200250SAN200256SAN250312 SAN250318SAN250324SAN300340SAN300348SAN300352SAN300360SAN300400
51.5251.5251.5251.5257.5857.5857.5857.5877.2777.2777.2777.27
106.06106.06106.06196.97196.97196.97196.97196.97
G
TRI-CLAMP
304 Stainless
11-1/222-1/23
TCC-6TCC-6TCC-8TCC-10TCC-12
15.5515.5516.8018.2521.00
hose size
partnumber
listeach
TRI-CLAMPFITTINGS
MACHINED FERRULES
1-32/641-38/641-44/641-50/642-4/642-10/642-16/642-20/642-40/642-44/642-50/642-56/643-12/643-18/643-24/643-40/643-48/643-52/643-60/644
hose size
partnumber
listeach
ferrulei.d.
MAX. SYSTEM WORKING PRESSURE (PSI @ 70°F) SEE NOTE 1
Hose System Componenets Hose SizeFitting/Coupling Attachment Hose Type 1 1-1/4 1-1/2 2 2-1/2 3
Tri-Clamp Ferrule Sanitary 500 - 450 350 325 300
Tri-Clamp Mach. Ferrule Sanitary 500 - 500 400 375 350
Wine Fitting Ferrule Sanitary - - 450 350 - 300
Wine Fitting Band Clamps Sanitary - - 100 100 - 50 39
NEW!
NEW!
PCT WINEFITTINGS
WINE FITTING - FEMALE STEM
304 Stainless
1-1/223
PCTF-6CPCTF-8CPCTF-12C
66.5272.70
149.76
hose size
partnumber
listeach
WINE FITTING - FEMALE STEM W/ HEAVY NUT
304 Stainless
23
PCTFBH-8PCTFBH-12
208.94269.55
hose size
partnumber
listeach
WINE FITTING - MALE STEM
304 Stainless
1-1/223
PCTM-6CPCTM-8CPCTM-12C
81.1588.69
182.71
hose size
partnumber
listeach
WINE GASKET FITTING
Buna-N
1-1/223
PCTGB-6PCTGB-8PCTGB-12
2.63 4.70
10.07
hose size
partnumber
listeach
Silicone1-1/223
PCTGS-6PCTGS-8PCTGS-12
2.63 4.70
10.07
PACIFIC COAST HEAVY NUT
Brass
1-1/223
NBPCT-6NBHPCT-8NBHPCT-12
37.8856.0675.00
hose size
partnumber
listeach
WINE FERRULES
304 Stainless
333333
FSS300344WFSS300348WFSS300352WFSS300400WFSS300408WFSS300416W
28.0828.0828.0828.0828.0828.08
hose size
partnumber
listeach
3-44/643-48/643-52/6444-8/644-16/64
ferrulei.d.
40
NEW!
PHONE 800-367-3678FAX [email protected]
Note: Standard ferrules for 1-1/2” & 2” can be used for wine fittings. For 3” use the following:
HCampbell Fittings
41
c
Ferrules & Sleeves for High, Medium, and Low-Pressure Hose Systems
Campbell Crimpnology™ ... the only comprehensive package of crimping products in the industry!
FERRULE & SLEEVE PART NUMBERING
F PS 150 216 L
PRODUCT F = Ferrule S = Sleeve
MATERIAL PS = Plated Steel
SS = Stainless Steel
NOMINAL HOSE SIZE 150 = 1-1/2”
200 = 2”
FERRULE/SLEEVE I.D. 216 = 2-16/64” 340 = 3-40/64”
NON-STANDARD LENGTH L = Long S = Short
Performance RatedAll Campbell pressure ratings are established and verified by hydrostatic testing to a 4x safety factor where applicable (see page 1 for pressure rating information). Test data and information regarding various combinations of hoses and fittings are available upon request.Note: Campbell sleeves may be used on non-Campbell fittings. We cannot provide crimp specifications or recommend working pressures for non-Campbell fittings. The pressure ratings in this catalog are valid only when using all Campbell parts. For safety and quality assurance, always proof test hose assembly according to NAHAD guidelines.
CampbellCrimpnology™Crimpnology refers to all of the technology involved in crimping: The integrated design of every fitting, coupling, ferrule, and sleeve; the crimp procedures; crimp specifications; and crimp training & support.
FITTING
The turn-in of the ferrule interlocks with the machined groove on the fitting or coupling, providing a mechanical attachment for exceptional hose retention.
INTERLOCK
FERRULE
HOSE
Features and BenefitsCrimpnology offers the following “7 Essentials” for crimping safe, repeatable, performance-rated hose systems:• Interlock groove on all fittings and couplings is compatible with the
turn-in end of the ferrule to ensure a 360° ferrule-to-fitting interlock.• Serrations specifically designed for crimping provide maximum hose
retention without potential tube failure.• Shank length and ferrule/sleeve length are matched to maximize
retention and to avoid hose tube or cover damage.• Detailed assembly procedures are provided, including information to
ensure use of compatible components. • Detailed crimping procedures ensure appropriate crimp specification
is derived for each hose and fitting combination.• On-site crimping training by a Hose System Specialist is offered by
Campbell Fittings to assist distributor personnel.• A daytime, toll-free “hotline” is manned by a Campbell Hose System
Specialist to assist in all aspects of crimping.
H
42
Prolongs the life of the hose assembly by relieving stress and failure points commonly found at the end of crimped fittings.
RELIEF BUMP
c
HFERRULES
FERRULESfor use with products shown below:
Plated Steel
3/43/43/43/43/41111111-1/41-1/41-1/41-1/21-1/21-1/21-1/21-1/21-1/21-1/21-1/2222222222-1/22-1/22-1/22-1/22-1/2333333333344444
FPS075112FPS075120FPS075124FPS075128FPS075132FPS100132FPS100136FPS100140FPS100144FPS100148FPS100152FPS125152FPS125156FPS125160FPS150160FPS150200FPS150204FPS150208FPS150212FPS150216FPS150220FPS150224FPS200232FPS200236FPS200240FPS200244FPS200248FPS200252FPS200256FPS200260FPS250308FPS250312FPS250316FPS250320FPS250328FPS300336FPS300340FPS300344FPS300348FPS300352FPS300356FPS300360FPS300400FPS300408FPS300416FPS400436FPS400440FPS400444FPS400448FPS400452
8.098.098.098.098.09
10.0010.0010.0010.0010.0010.0010.3510.3510.3511.4011.4011.4011.4011.4011.4011.4011.4012.7412.7412.7412.7412.7412.7412.7412.7417.2217.2217.2217.2217.2217.8317.8317.8317.8317.8317.8317.8317.8317.8317.8323.4323.4323.4323.4323.43
hosesize
partnumber
listeach
1-12/641-20/641-24/641-28/641-32/641-32/641-36/641-40/641-44/641-48/641-52/641-52/641-56/641-60/641-60/6422-4/642-8/642-12/642-16/642-20/642-24/642-32/642-36/642-40/642-44/642-48/642-52/642-56/642-60/643-8/643-12/643-16/643-20/643-28/643-36/643-40/643-44/643-48/643-52/643-56/643-60/6444-8/644-16/644-36/644-40/644-44/644-48/644-52/64
ferrulei.d.
444466668888
FPS400456FPS400460FPS400500FPS400504FPS600656FPS600700FPS600708FPS600724FPS800848FPS800900FPS800916FPS800932
23.4323.4323.4323.4351.9951.9951.9951.99
112.20112.20112.20112.20
4-56/644-60/6455-4/646-56/6477-8/647-24/648-48/6499-16/649-32/64
Stainless Steel
1/21/21/23/43/43/43/43/43/41111111/41/41/41-1/21-1/21-1/21-1/21-1/21-1/21-1/21-1/2222222222-1/22-1/22-1/22-1/22-1/233333333444444444
FSS050100FSS050104FSS050108FSS075112FSS075116FSS075120FSS075124FSS075128FSS075132FSS100132FSS100136FSS100140FSS100144FSS100148FSS100152FSS125152FSS125156FSS125160FSS150160FSS150200FSS150204FSS150208FSS150212FSS150216FSS150220FSS150224FSS200232FSS200236FSS200240FSS200244FSS200248FSS200252FSS200256FSS200260FSS250308FSS250312FSS250316FSS250320FSS250328FSS300336FSS300340FSS300344FSS300348FSS300352FSS300356FSS300360FSS300400FSS400436FSS400440FSS400444FSS400448FSS400452FSS400456FSS400460FSS400500FSS400504
9.319.319.319.659.659.659.659.659.65
10.1510.1510.1510.1510.1510.1512.0012.0012.0015.6015.6015.6015.6015.6015.6015.6015.6017.6317.6317.6317.6317.6317.6317.6317.6327.0827.0827.0827.0827.0828.9228.9228.9228.9228.9228.9228.9228.9267.1467.1467.1467.1467.1467.1467.1467.1467.14
hosesize
partnumber
listeach
11-4/641-8/641-12/641-16/641-20/641-24/641-28/641-32/641-32/641-36/641-40/641-44/641-48/641-52/641-52/641-56/641-60/641-60/6422-4/642-8/642-12/642-16/642-20/642-24/642-32/642-36/642-40/642-44/642-48/642-52/642-56/642-60/643-8/643-12/643-16/643-20/643-28/643-36/643-40/643-44/643-48/643-52/643-56/643-60/6444-36/644-40/644-44/644-48/644-52/644-56/644-60/6455-4/64
ferrulei.d.
continued on next page43
NEW!
NEW!
NEW!
NEW!
Crimpnology Nipples
Section B
ChemJoint Couplings & Male Stems
Section F
Campbell Cobra
Parts C & ESection C
SanitaryTri-Clamp Section G
hosesize
partnumber
listeach
ferrulei.d.
66668
FSS600656FSS600700FSS600708FSS600724FSS800XXX
84.9284.9284.9284.92POR
6-56/6477-8/647-24/64
Plated Steel Heavy Duty(for 206S & FRAC-16C fittings only)444444
FPS400448FFPS400452FFPS400456FFPS400460FFPS400500FFPS400504F
33.2533.2533.2533.2533.2533.25
4-48/644-52/644-56/644-60/6455-4/64
FERRULESfor use with products shown below:
WARNING: NOT FOR USE WITH STEAM
Plated Steel
1/21/21/23/43/43/43/43/41111111/41/41/41-1/21-1/21-1/21-1/21-1/21-1/21-1/21-1/2222222222-1/22-1/22-1/22-1/22-1/2
FPS050100SFPS050104SFPS050108SFPS075116FPS075120FPS075124FPS075128FPS075132FPS100132FPS100136FPS100140FPS100144FPS100148FPS100152FPS125152LFPS125156LFPS125160LFPS150160LFPS150200LFPS150204LFPS150208LFPS150212LFPS150216LFPS150220LFPS150224LFPS200232LFPS200236LFPS200240LFPS200244LFPS200248LFPS200252LFPS200256LFPS200260LFPS250308LFPS250312LFPS250316LFPS250320LFPS250328L
8.908.908.908.098.098.098.098.09
10.0010.0010.0010.0010.0010.0014.2914.2914.2917.1017.1017.1017.1017.1017.1017.1017.1020.7620.7620.7620.7620.7620.7620.7620.7628.5528.5528.5528.5528.55
hosesize
partnumber
listeach
11-4/641-8/641-16/641-20/641-24/641-28/641-32/641-32/641-36/641-40/641-44/641-48/641-52/641-52/641-56/641-60/641-60/6422-4/642-8/642-12/642-16/642-20/642-24/642-32/642-36/642-40/642-44/642-48/642-52/642-56/642-60/643-8/643-12/643-16/643-20/643-28/64
ferrulei.d.
Long Crimpnology
Nipples Section B
Viton® Seal Ground
Joints and Male Stems
Section D
333333333344444444444
FPS300336LFPS300340LFPS300344LFPS300348LFPS300352LFPS300356LFPS300360LFPS300400LFPS300408LFPS300416LFPS400440LFPS400444LFPS400448LFPS400452LFPS400456LFPS400460LFPS400500LFPS400504LFPS400512LFPS400520LFPS400528L
28.7228.7228.7228.7228.7228.7228.7228.7228.7228.7237.8537.8537.8537.8537.8537.8537.8537.8537.8537.8537.85
3-36/643-40/643-44/643-48/643-52/643-56/643-60/6444-8/644-16/644-40/644-44/644-48/644-52/644-56/644-60/6455-4/645-12/645-20/645-28/64
LIGHT DUTY FERRULES
LIGHT DUTY FERRULESfor use with couplings shown below:
Plated Steel
1/21/23/43/43/43/43/43/411111
FLPS050058FLPS050060FLPS075108FLPS075110FLPS075112FLPS075114FLPS075116FLPS075118FLPS100128FLPS100130FLPS100132FLPS100134FLPS100136
1.151.151.551.551.551.551.551.552.352.352.352.352.35
hosesize
partnumber
listeach
58/6460/641-8/64 1-10/64 1-12/64 1-14/64 1-16/64 1-18/64 1-28/641-30/641-32/641-34/641-36/64
ferrulei.d.
All Campbell
UniversalsSection E
Single-Lock (Bowes)Section E
UniversaLockSection E
Double-Lock (Thor)
Section E
44
PHONE 800-367-3678FAX [email protected]
NEW!
H304 Stainless
1/23/43/43/43/43/43/411111
FLSS050058FLSS075108FLSS075110FLSS075112FLSS075114FLSS075116FLSS075118FLSS100128FLSS100130FLSS100132FLSS100134FLSS100136
2.512.912.912.912.912.912.914.284.284.284.284.28
hosesize
partnumber
listeach
58/641-8/64 1-10/64 1-12/64 1-14/64 1-16/64 1-18/64 1-28/641-30/641-32/641-34/641-36/64
ferrulei.d.
SLEEVES
SLEEVESfor use with products shown below:
Plated Steel
3/43/43/43/43/41111111111/41/41-1/21-1/21-1/21-1/21-1/21-1/21-1/21-1/21-1/21-1/21-1/2
SPS075108SPS075112SPS075116SPS075120SPS075124SPS100116SPS100120SPS100124SPS100128SPS100132SPS100136SPS100140SPS100144SPS100148SPS125156SPS125200SPS150148SPS150152SPS150156SPS150160SPS150200SPS150204SPS150208SPS150212SPS150216SPS150220SPS150224
4.814.814.814.814.814.704.704.704.704.704.704.704.704.704.794.794.834.834.834.834.834.834.834.834.834.834.83
hosesize
partnumber
listeach
1-8/641-12/641-16/641-20/641-24/641-16/641-20/641-24/641-28/641-32/641-36/641-40/641-44/641-48/641-56/6421-48/641-52/641-56/641-60/6422-4/642-8/642-12/642-16/642-20/642-24/64
sleevei.d.
Standard Cobra™
Parts C & ESection C
Campbell Cobra™
Parts C & E Section C
22222222222222-1/22-1/22-1/22-1/22-1/22-1/233333333333334444444444445556666666666888888888
SPS200216SPS200224SPS200228SPS200232SPS200236SPS200240SPS200244SPS200248SPS200252SPS200256SPS200260SPS200300SPS200302SPS250300SPS250308SPS250316SPS250324SPS250332SPS250334SPS300316SPS300324SPS300328SPS300332SPS300336SPS300340SPS300344SPS300348SPS300352SPS300356SPS300360SPS300400SPS300402SPS400416SPS400424SPS400432SPS400436SPS400440SPS400444SPS400448SPS400452SPS400456SPS400460SPS400500SPS400502SPS500536SPS500548SPS500560SPS600616SPS600624SPS600632SPS600640SPS600648SPS600656SPS600700SPS600708SPS600716SPS600724SPS800816SPS800832SPS800840SPS800848SPS800900SPS800916SPS800932SPS800940SPS800948
5.705.705.705.705.705.705.705.705.705.705.705.705.708.708.708.708.708.708.70
10.2410.2410.2410.2410.2410.2410.2410.2410.2410.2410.2410.2410.2413.8013.8013.8013.8013.8013.8013.8013.8013.8013.8013.8013.8033.6933.6933.6937.8637.8637.8637.8637.8637.8637.8637.8637.8637.8665.5865.5865.5865.5865.5865.5865.5865.5865.58
2-16/642-24/642-28/642-32/642-36/642-40/642-44/642-48/642-52/642-56/642-60/6433-2/6433-8/643-16/643-24/643-32/643-34/643-16/643-24/643-28/643-32/643-36/643-40/643-44/643-48/643-52/643-56/643-60/644 4-2/644-16/644-24/644-32/644-36/644-40/644-44/644-48/644-52/644-56/644-60/6455-2/645-36/645-48/645-60/646-16/646-24/646-32/646-40/646-48/646-56/646 76 7-8/646 7-16/646 7-24/648-16/648-32/648-40/648-48/6499-16/649-32/649-40/649-48/64
45
continued on next page
hosesize
partnumber
listeach
sleevei.d.
3/43/43/43/43/41111111111-1/41-1/41-1/21-1/21-1/21-1/21-1/21-1/21-1/21-1/21-1/21-1/222222222222222-1/22-1/22-1/22-1/22-1/22-1/23333333333334444444444
SSS075104SSS075108SSS075112SSS075116SSS075124SSS100116SSS100120SSS100124SSS100128SSS100132SSS100136SSS100140SSS100144SSS100148SSS125156SSS125200SSS150152SSS150156SSS150160SSS150200SSS150204SSS150208SSS150212SSS150216SSS150220SSS150224SSS200216SSS200224SSS200228SSS200232SSS200236SSS200240SSS200244SSS200248SSS200252SSS200256SSS200260SSS200300SSS200302SSS250300SSS250308SSS250316SSS250324SSS250332SSS250334SSS300324SSS300328SSS300332SSS300336SSS300340SSS300344SSS300348SSS300352SSS300356SSS300360SSS300400SSS300402SSS400432SSS400436SSS400440SSS400444SSS400448SSS400452SSS400456SSS400460SSS400500SSS400502
7.787.787.787.787.787.557.557.557.557.557.557.557.557.558.538.538.478.478.478.478.478.478.478.478.478.47
11.7411.7411.7411.7411.7411.7411.7411.7411.7411.7411.7411.7411.7416.5616.5616.5616.5616.5616.5617.0417.0417.0417.0417.0417.0417.0417.0417.0417.0417.0417.0428.3328.3328.3328.3328.3328.3328.3328.3328.3328.33
1-4/641-8/64 1-12/641-16/641-24/641-16/641-20/641-24/641-28/641-32/641-36/641-40/641-44/641-48/641-56/6421-52/641-56/641-60/6422-4/642-8/642-12/642-16/642-20/642-24/642-16/642-24/642-28/642-32/642-36/642-40/642-44/642-48/642-52/642-56/642-60/6433-2/6433-8/643-16/643-24/643-32/643-34/643-24/643-28/643-32/643-36/643-40/643-44/643-48/643-52/643-56/643-60/6444-2/644-32/644-36/644-40/644-44/644-48/644-52/644-56/644-60/6455-2/64
304 Stainless6666666668
SSS600616SSS600624SSS600632SSS600640SSS600648SSS600656SSS600700SSS600708SSS600716SSS800XXX
72.5672.5672.5672.5672.5672.5672.5672.5672.56POR
6-16/646-24/646-32/646-40/646-48/646-56/6477-8/647-16/64
222222222233333333334444444444
SAL200228SAL200232SAL200236SAL200240SAL200244SAL200248SAL200252SAL200256SAL200260SAL200300SAL300332SAL300336SAL300340SAL300344SAL300348SAL300352SAL300356SAL300360SAL300400SAL300404SAL400436SAL400440SAL400444SAL400448SAL400452SAL400456SAL400460SAL400500SAL400504SAL400508
10.9510.9510.9510.9510.9510.9510.9510.9510.9510.9516.5516.5516.5516.5516.5516.5516.5516.5516.5516.5522.1622.1622.1622.1622.1622.1622.1622.1622.1622.16
2-28/642-32/642-36/642-40/642-44/642-48/642-52/642-56/642-60/6433-32/643-36/643-40/643-44/643-48/643-52/643-56/643-60/6444-4/644-36/644-40/644-44/644-48/644-52/644-56/644-60/6455-4/645-8/64
Aluminum
SLEEVESfor use with products shown below:
Plated Steel
1/23/43/43/43/43/4111111
SPS050100SSPS075108SSPS075112SSPS075116SSPS075120SSPS075124SSPS100128SSPS100132SSPS100136SSPS100140SSPS100144SSPS100148S
4.874.904.904.904.904.904.704.704.704.704.704.70
hosesize
partnumber
listeach
11-8/641-12/641-16/641-20/641-24/641-28/641-32/641-36/641-40/641-44/641-48/64
sleevei.d.
Combination Nipples
Section A
Suction Hose Couplings Section A
Ball & Socket Couplings Section A
46
PHONE 800-367-3678FAX [email protected]
SLEEVES (continued from previous page)
NEW!
H
1-1/41-1/41-1/41-1/41-1/21-1/21-1/21-1/21-1/21-1/21-1/21-1/222222222222222-1/22-1/22-1/22-1/22-1/22-1/22-1/23333333333333444444444445556666666666
SPS125140SSPS125148SSPS125152SSPS125156SSPS150160SSPS150200SSPS150204SSPS150208SSPS150212SSPS150216SSPS150220SSPS150224SSPS200208SSPS200216SSPS200224SSPS200228SSPS200232SSPS200236SSPS200240SSPS200244SSPS200248SSPS200252SSPS200256SSPS200260SSPS200300SSPS250248SSPS250256SSPS250300SSPS250308SSPS250316SSPS250324SSPS250332SSPS300308SSPS300316SSPS300324SSPS300328SSPS300332SSPS300336SSPS300340SSPS300344SSPS300348SSPS300352SSPS300356SSPS300360SSPS300400SSPS400416SSPS400424SSPS400432SSPS400436SSPS400440SSPS400444SSPS400448SSPS400452SSPS400456SSPS400460SSPS400500SSPS500536SPS500548SPS500560SPS600616SPS600624SPS600632SPS600640SPS600648SPS600656SPS600700SPS600708SPS600716SPS600724
4.944.944.944.944.944.944.944.944.944.944.944.94 5.995.995.995.995.995.995.995.995.995.995.995.995.998.188.188.188.188.188.188.18
10.0410.0410.0410.0410.0410.0410.0410.0410.0410.0410.0410.0410.0413.5313.5313.5313.5313.5313.5313.5313.5313.5313.5313.5333.6933.6933.6937.8637.8637.8637.8637.8637.8637.8637.8637.8637.86
1-40/641-48/641-52/641-56/641-60/6422-4/642-8/642-12/642-16/642-20/642-24/642-8/642-16/642-24/642-28/642-32/642-36/642-40/642-44/642-48/642-52/642-56/642-60/6432-48/642-56/6433-8/643-16/643-24/643-32/643-8/643-16/643-24/643-28/643-32/643-36/643-40/643-44/643-48/643-52/643-56/643-60/6444-16/644-24/644-32/644-36/644-40/644-44/644-48/644-52/644-56/644-60/6455-36/645-48/645-60/646-16/646-24/646-32/646-40/646-48/646-56/6477-8/647-16/647-24/64
888888888101010101010101212
SPS800816SPS800832SPS800840SPS800848SPS800900SPS800916SPS800932SPS800940SPS800948SPS101032SPS101048SPS101056SPS101100SPS101116SPS101132SPS101148SPS121232SPS121248
65.5865.5865.5865.5865.5865.5865.5865.5865.5890.9090.9090.9090.9090.9090.9090.90
141.11141.11
8-16/648-32/648-40/648-48/6499-16/649-32/649-40/649-48/6410-32/6410-48/6410-56/641111-16/6411-32/6411-48/6412-32/6412-48/64
304 Stainless1/23/43/43/43/43/43/43/4111111-1/41-1/41-1/41-1/41-1/21-1/21-1/21-1/21-1/21-1/21-1/21-1/22222222222222-1/22-1/22-1/22-1/22-1/2
SSS050100SSSS075104SSSS075108SSSS075112SSSS075116SSSS075120SSSS075124SSSS075128SSSS100132SSSS100136SSSS100140SSSS100144SSSS100148SSSS125140SSSS125148SSSS125152SSSS125156SSSS150150SSSS150200SSSS150204SSSS150208SSSS150212SSSS150216SSSS150220SSSS150224SSSS200208SSSS200216SSSS200224SSSS200228SSSS200232SSSS200236SSSS200240SSSS200244SSSS200248SSSS200252SSSS200256SSSS200260SSSS250300SSSS250308SSSS250316SSSS250324SSSS250332S
7.427.427.427.427.427.427.427.427.427.427.427.427.428.848.848.848.848.848.848.848.848.848.848.848.84
12.7012.7012.7012.7012.7012.7012.7012.7012.7012.7012.7012.7016.5616.5616.5616.5616.56
11-4/641-8/641-12/641-16/641-20/641-24/641-28/641-32/641-36/641-40/641-44/641-48/641-40/641-48/641-52/641-56/641-50/6422-4/642-8/642-12/642-16/642-20/642-24/642-8/642-16/642-24/642-28/642-32/642-36/642-40/642-44/642-48/642-52/642-56/642-60/6433-8/643-16/643-24/643-32/64
333333333333344444444444666666666681012
SSS300308SSSS300316SSSS300324SSSS300328SSSS300332SSSS300336SSSS300340SSSS300344SSSS300348SSSS300352SSSS300356SSSS300360SSSS300400SSSS400416SSSS400424SSSS400432SSSS400436SSSS400440SSSS400444SSSS400448SSSS400452SSSS400456SSSS400460SSSS400500SSSS600616SSS600624SSS600632SSS600640SSS600648SSS600656SSS600700SSS600708SSS600716SSS600724SSS800XXXSSS101XXXSSS121XXX
17.0417.0417.0417.0417.0417.0417.0417.0417.0417.0417.0417.0417.0428.3328.3328.3328.3328.3328.3328.3328.3328.3328.3328.3372.5672.5672.5672.5672.5672.5672.5672.5672.5672.56PORPORPOR
3-8/643-16/643-24/643-24/643-28/643-36/643-40/643-44/643-48/643-52/643-56/643-60/6444-16/644-24/644-32/644-36/644-40/644-44/644-48/644-52/644-56/644-60/6456-16/646-24/646-32/646-40/646-48/646-56/6477-8/647-16/647-24/64
47
hosesize
partnumber
listeach
sleevei.d.
NEW!
NEW!
NEW!
NEW!NEW!
48
Crimp Chart: a chart designed to assist in determining the crimp spec, which includes allowances for serration style, fitting and ferrule/sleeve O.D. and design.Crimp Spec (or specification): the outside diameter of the ferrule/sleeve after assembling and crimping.Cut-slots: notches cut into the turned-in end of a ferrule that allows the interlock portion to crimp straight down into the fitting interlock without opening outward during crimping.
Ferrule: a tube-like product with one end turned in, so as to affect an interlock into a groove on a mating fitting or coupling.Ferrule Length: the overall length of the ferrule as measured from the turn-in end to the open end.Ferrule/Sleeve I.D.: the inside bowl diameter of the ferrule; the inside diameter of the sleeve; the inside diameter of either where the hose is placed.Gauge: the thickness of the ferrule/sleeve material.
Interlock Groove: a groove designed into the fitting/coupling to accept the turn-in end of the ferrule.Shank Length: the hose barb area measured from the end of the fitting to the interlock groove.Sleeve: a tube-like product with no interlock provisions. Sleeve Length: the overall length of the sleeve from end to end.Turn-in: the interlocking end of the ferrule.
Glossary of Campbell Crimpnology™ Terms
ICampbell Fittings
49
c
Small Diameter Multi-Purpose Fittings
MALE & FEMALE INSERT FITTINGSInsert fittings are precision screw machined in steel, stainless steel and brass.
Recommended use• Low pressure air, waterRecommended hose attachment• Brass Crimp-on Ferrules • Worm Gear Clamps • Preformed Band Clamps
BRASS PUSH-ON FITTINGS
Recommended use• Low pressure air, water
Recommended hose attachment• None - When used with special Push-on
Hose, no clamp or ferrule is needed. The liner of the hose grabs securely onto the barb of the fitting.
DO NOT use Push-on Fittings with conventional hose.
BRASS GARDEN HOSE COUPLINGSPrecision screw machined from brass. Available with short shank or long shank.
Recommended use• Low pressure waterRecommended hose attachment• Brass Crimp-on Ferrules• Worm Gear Clamps• Preformed Band Clamps
BRASS FERRULESBrass ferrules are lightweight, easy to assemble, and provide a smooth outer surface.
Recommended use• Crimp-on hose assemblies to secure
hose and fittings for low-pressure air and water applications
I
50
I
MALE INSERT
Plated Steel
1/4 X 1/81/4 X 1/41/4 X 3/83/8 X 1/83/8 X 1/43/8 X 3/83/8 X 1/21/2 X 1/41/2 X 3/81/2 X 1/21/2 X 3/43/4 X 1/23/4 X 3/41 X 3/41 X 1
SM-0402SM-0404SM-0406SM-0602SM-0604SM-0606SM-0608SM-0804SM-0806SM-0808SM-0812SM-1208SM-1212SM-1612SM-1616
7.0911.488.879.19
10.9410.1312.8613.0212.6610.0718.2014.9814.9318.1818.87
hose xnpt
partnumber
listeach
316 Stainless1/4 X 1/81/4 X 1/41/4 X 3/83/8 X 1/43/8 X 3/83/8 X 1/21/2 X 1/41/2 X 3/81/2 X 1/21/2 X 3/45/8 X 1/23/4 X 1/23/4 X 3/43/4 X 11 X 3/41 X 1
SSM-0402SSM-0404SSM-0406SSM-0604SSM-0606SSM-0608SSM-0804SSM-0806SSM-0808SSM-0812SSM-1008SSM-1208SSM-1212SSM-1216SSM-1612SSM-1616
30.9725.3628.6525.0724.0143.6023.3928.3539.5054.5052.6552.6571.2398.1060.7091.35
BARBED HOSE INSERTS Brass
1/4 X 1/81/4 X 1/41/4 X 3/85/16 X 1/85/16 X 1/43/8 X 1/83/8 X 1/43/8 X 3/83/8 X 1/21/2 X 1/41/2 X 3/81/2 X 1/21/2 X 3/45/8 X 3/85/8 X 1/25/8 X 3/43/4 X 1/23/4 X 3/41 X 3/41 X 11-1/4 X 1
BM-0402BM-0404BM-0406BM-0502BM-0504BM-0602BM-0604BM-0606BM-0608BM-0804BM-0806BM-0808BM-0812BM-1006BM-1008BM-1012BM-1208BM-1212BM-1612BM-1616BM-2016
191.00207.00312.00208.00245.00240.00210.00316.00550.00315.00322.00490.00730.00364.00532.00735.00622.00675.00908.00
1481.001797.00
hose xnpt
partnumber
list/100
FEMALE INSERT
Brass
1/4 X 1/81/4 X 1/45/16 X 1/43/8 X 1/43/8 X 3/81/2 X 3/81/2 X 1/2
BF-0402BF-0404BF-0504BF-0604BF-0606BF-0806BF-0808
220.00284.00340.00282.00382.00420.00536.00
hose xnpt
partnumber
list/100
HOSE MENDER
Brass
1/4 X 1/45/16 X 5/163/8 X 3/81/2 X 1/25/8 X 5/83/4 X 3/4
BH-0404BH-0505BH-0606BH-0808BH-1010BH-1212
204.00257.00240.00336.00400.00560.00
hose size
partnumber
list/100
FEMALE SWIVEL(with ball seat)
Brass
1/4 X 1/45/16 X 1/43/8 X 1/43/8 X 3/81/2 X 3/81/2 X 1/23/4 X 3/4
BFS-0404BFS-0504BFS-0604BFS-0606BFS-0806BFS-0808BFS-1212
312.00453.00303.00420.00735.00637.00997.00
hose xnpsm
partnumber
list/100
252525252525252525252525252525252525252525
cartonqty
25252525252525
cartonqty
252525252525
cartonqty
25252525252525
cartonqty
51
BRASS PUSH-ON FITTINGS
MALE PUSH-ON
1/4 X 1/81/4 X 1/41/4 X 3/85/16 X 1/43/8 X 1/83/8 X 1/43/8 X 3/83/8 X 1/21/2 X 1/41/2 X 3/81/2 X 1/21/2 X 3/45/8 X 3/85/8 X 1/23/4 X 1/23/4 X 3/4
BMP-0402BMP-0404BMP-0406BMP-0504BMP-0602BMP-0604BMP-0606BMP-0608BMP-0804BMP-0806BMP-0808BMP-0812BMP-1008BMP-1012BMP-1208BMP-1212
221.00260.00341.00327.00353.00290.00336.00555.00411.00370.00535.00800.00727.00972.00842.00895.00
hose xnpt
partnumber
list/100
25252525252525252525252525252525
cartonqty
FEMALE PUSH-ON
1/4 X 1/81/4 X 1/45/16 X 1/43/8 X 1/43/8 X 3/81/2 X 3/81/2 X 1/2
BFP-0402BFP-0404BFP-0504BFP-0604BFP-0606BFP-0806BFP-0808
330.00346.00535.00387.00423.00507.00565.00
hose xnpt
partnumber
list/100
25252525252525
cartonqty
HOSE MENDER PUSH-ON
1/4 X 1/45/16 X 5/163/8 X 3/81/2 X 1/25/8 X 5/83/4 X 3/4
BHP-0404BHP-0505BHP-0606BHP-0808BHP-1010BHP-1212
300.00399.00340.00550.00786.00925.00
hosesize
partnumber
list/100
252525252525
cartonqty
MACHINED BRASS GARDEN HOSE COUPLINGS
GARDEN HOSE SET
3/81/25/83/41(NPSH)
GHS-06GHS-08GHS-10GHS-12NPS-16
13.1713.1713.4013.7026.85
hose size
partnumber
listeach
2525252525
cartonqty
GARDEN HOSE FEMALE
3/81/25/83/41(NPSH)
GHF-06GHF-08GHF-10GHF-12NPF-16
7.117.117.117.42
13.14
hose size
partnumber
listeach
2525252525
cartonqty
GARDEN HOSE MALE
3/81/25/83/41(NPSH)
GHM-06GHM-08GHM-10GHM-12NPM-16
6.756.596.816.81
14.25
hose size
partnumber
listeach
2525252525
cartonqty
WASHER
3/41(NPSH)
GHW-12GHW-16
25.0045.00
washersize
partnumber
list/100
100100
cartonqty
52
PHONE 800-367-3678FAX [email protected]
IBRASS FERRULES
0.410 X 0.5000.450 X 0.5630.478 X 0.6870.500 X 0.5000.500 X 1.0000.525 X 0.5000.525 X 1.0000.531 X 1.000
0.548 X 0.4840.562 X 1.0000.575 X 0.4840.593 X 1.0000.600 X 0.5000.625 X 0.5000.625 X 1.0000.650 X 0.500
0.656 X 1.0000.675 X 0.5160.687 X 1.0000.700 X 0.5160.718 X 1.0000.718 X 1.0000.725 X 0.5310.750 X 0.5310.750 X 1.0000.750 X 1.000
0.775 X 0.5630.782 X 1.0000.782 X 1.0000.812 X 1.0000.825 X 0.5470.875 X 0.8440.937 X 0.8440.975 X 0.8441.150 X 0.844
i.d. xlength
0.2660.3440.3280.3440.3440.3440.3750.438
0.3750.4380.4380.4380.5000.5000.4380.500
0.4380.5000.5000.5000.6250.5000.5000.5000.6250.500
0.5000.6250.5000.5620.6250.5620.6880.6880.875
piercedia.
F-222F-316F-157F-225F-265F-230F-268F-273
F-236F-278F-031F-284F-030F-028F-288F-025
F-294F-022F-300F-018F-302F-302BF-016F-013F-305F-305B
F-009F-310F-310BF-314F-001F-255F-242F-181F-241
partnumber
32.0032.0045.0033.0056.0033.0057.0056.00
34.0060.0036.0062.0037.0039.0063.0040.00
75.0043.0075.0080.9072.0072.0043.0044.0079.0076.00
67.0091.0093.0095.0088.2079.00
127.10105.00120.00
list/100
5050505050505050
5050505050505050
50505050505050505050
505050505050505050
bagqty.
53
54
PHONE 800-367-3678FAX [email protected]
JCampbell Fittings
55
Multi-Purpose Clamps & Tools
PREFORMED BAND CLAMPS
ULTRA-LOK® CLAMPSUltra-Lok® Clamps are manufactured from 201 Stainless Steel. The buckle is thicker and stronger than standard band clamps for superior holding strength. The powerful Ultra-Lok® Tool is portable which enables the operator to bring the tool to the hose, instead of the hose to the tool, for much easier assembly.
JR®-TYPE PREFORMED CLAMPSJr®-type preformed clamps are available in both galvanized carbon steel and 201 stainless steel. All buckles are stainless steel. Jr® clamps are designed for use with high production air tools, or the C001 Banding Tool.
PUNCH-TYPE PREFORMED CLAMPSPunch type preformed clamps are available in galvanized carbon steel and 201 stainless steel. All buckles are stainless steel. Punch clamps are designed for use with the punch style tool for the ultimate in field serviceability.
All band clamps, banding, tools and accessories are genuine Band-It products. Ultra-Lok® and Jr® are registered trademarks of Band-It®.
T-Bolt clamps provide 360 degrees of sealing surface, and are particularly useful for high torque applications.
T-BOLT CLAMPS
Banding is cartoned in 100 foot rolls and available in 201 stainless steel. Buckles, sold separately, are 201 stainless steel. Banding features specially rolled edges to reduce the possibility of injury. Use the C001 Banding Tool to install.
BANDING AND BUCKLES
WORM GEAR CLAMPSWorm gear clamps are available in standard 1/2” band, miniature 5/16” band and quick release 1/2” band. All are manufactured with stainless steel band and stainless steel housing, with your choice of a carbon steel or stainless steel screw.
J
56
JBAND CLAMPS, BANDING, AND BUCKLES
ULTRA-LOCK® SMOOTH I.D. CLAMPS
Band: 201 StainlessBuckle: 201 Stainless
3/43/43/43/43/43/43/43/43/43/43/43/43/4
clampwidth
22-3/433-1/244-1/255-1/266-1/2789
clampid.
UL227UL210UL211UL212UL213UL214UL215UL270UL216UL217UL218UL219UL228
partnumber
803.15875.36948.16
1009.101158.431243.081344.101394.861545.741703.061860.122094.222344.63
list/100
100505050252525252525252510
cartonqty.
JR®-TYPE PREFORMED-SMOOTH I.D.
Band: Galvanized SteelBuckle: 201 Stainless
3/83/83/83/83/83/83/83/8
1/21/21/21/21/21/21/21/21/21/2
clampwidth
13/1611-3/822-1/233-1/24
11-1/41-1/21-3/422-1/22-3/433-1/24
clampid.
JS301JS343JS302JS345JS321JS346JS355JS348
JS303JS304JS331JS336JS337JS333JS330JS334JS347JS349
partnumber
110.90115.64122.01151.33223.64195.20280.59308.32
154.61170.20192.40224.70233.08247.25268.19297.27334.96376.55
list/100
100100100100100100100100
100100100100100100100100100100
cartonqty.
5/85/85/85/85/8
3/43/43/43/43/43/43/43/43/43/43/4
1-1/21-3/422-1/42-1/2
22-3/433-1/244-1/255-1/4678
JS305JS306JS307JS308JS309
JS327JS310JS311JS312JS313JS314JS315JS370JS316JS318JS319
200.84222.35243.55259.07280.11
297.98334.48352.77380.67440.13464.48508.16625.28584.18692.92984.49
100100100100100
10050505025252525252525
Band: 201 StainlessBuckle: 201 Stainless
1/41/41/41/41/41/41/41/41/41/41/4
3/83/83/83/83/83/83/83/8
1/21/21/21/21/21/21/21/21/21/2
5/85/85/85/85/8
3/43/43/43/43/43/43/43/43/43/43/4
clampwidth
13-1611-3/81-1/222-1/22-3/433-1244-1/2
13/1611-3/822-1/233-1/24
11-1/41-1/21-3/422-1/22-3/433-1/24
1-1/21-3/422-1/42-1/2
22-3/433-1/244-1/255-1/4678
clampid.
JS240JS242JS241JS252JS253JS220JS256JS244JS257JS258JS259
JS201JS243JS202JS245JS221JS246JS255JS248
JS203JS204JS231JS236JS237JS233JS230JS234JS247JS249
JS205JS206JS207JS208JS209
JS227JS210JS211JS212JS213JS214JS215JS270JS216JS218JS219
partnumber
277.59278.79304.14301.88338.21376.00403.02399.13428.47519.08611.65
287.42330.68323.72366.46417.36469.64577.38555.90
400.51441.71508.42576.67605.18634.94666.28736.95809.20883.35
531.38587.43643.99684.84730.87
795.45866.99939.08999.50
1147.091230.971331.081381.461531.311842.462074.51
list/100
100100100100100100100100100100100
100100100100100100100100
100100100100100100100100100100
100100100100100
10050505025252525252525
cartonqty.
57
PUNCH-TYPE PREFORMED
Band: Galvanized SteelBuckle: 201 Stainless
3/83/8
5/85/85/85/85/85/85/85/85/85/85/85/85/85/85/85/8
clampwidth
13/161-3/8
11-1/41-1/21-3/422-1/42-1/22-3/433-1/244-1/25678
clampid.
CP3CP311
CP4CP5CP6CP7CP8CP9CP10CP11CP12CP14CP16CP18CP20CP24CP28CP32
partnumber
77.7492.25
96.29101.70108.70118.90127.12135.38163.49170.94181.57193.89223.54236.05248.93270.95312.73438.19
list/100
100100
10010010010010010050505050252525252525
cartonqty
Band: 201 StainlessBuckle: 201 Stainless3/83/8
5/85/85/85/85/85/85/85/85/85/85/85/85/85/85/85/8
13/161-3/8
11-1/41-1/21-3/422-1/42-1/22-3/433-1/244-1/25678
CP3-SCP311-S
CP4-SCP5-SCP6-SCP7-SCP8-SCP9-SCP10-SCP11-SCP12-SCP14-SCP16-SCP18-SCP20-SCP24-SCP28-SCP32-S
192.26220.54
291.96306.94325.86357.42377.68402.70436.38462.09482.98533.26605.31651.72700.63791.45942.18
1030.25
100100
10010010010010010050505050252525252525
I.D. TIE-LOK TIES
304 Stainless
1/41/41/41/41/4
widthin.
1016-1/222-1/22935
lengthin.
AS211AS212AS213AS214AS215
partnumber
249.34326.62404.67484.84557.28
list/100
100100100100100
cartonqty.
I.D. TAGS
304 Stainless
3/41-1/23/4
widthin.
22-1/23-1/2
lengthin.
ID100ID101ID102
partnumber
190.27260.55250.09
list/100
100100100
cartonqty.
YOUR NAME
ULTRA-LOK ELECTRIC INSTALLATION TOOL
UL9010part number
for Ultra-Lok Preformed Clampsdescription
PORlist each
STANDARD AIR TOOL & COMPONENTS
S750part number
with S180 headdescription
PORlist each
CENTER PUNCH TOOLS & ACCESSORIES
T300part number
for 5/8” wide clampsdescription
PORlist each
COMPACT TOOL SET
S38part number
PORlist each
58
PHONE 800-367-3678FAX [email protected]
JBAND TOOL
C001part number
PORlist each
BAND TOOL ADAPTER
J001J050
part numberPORPOR
list eachJr adapterheavy duty adapter
description
TIE-LOK TOOL
A920part number
PORlist each
BAND
1/43/81/25/83/4
bandwidth
C202C203C204C205C206
partnumber
129.78169.04228.47276.50340.98
list/100ft.
100 ft.100 ft.100 ft.100 ft.100 ft.
cartonqty.
304 Stainless
BUCKLES
1/43/81/25/83/4
bandwidth
C252C253C254C255C256
partnumber
105.52116.60157.67196.97238.17
list/100
100100100100100
cartonqty.
201 Stainless Steel
WORM GEAR CLAMPS
STANDARD WORM GEAR(5/16” screw, 1/2” band)
Screw: Galvanized SteelBand: 301 Stainless Steel
3/8 X 7/87/16 X 19/16 X 1-1/169/16 X 1-1/411/16 X 1-1/23/4 X 1-3/41-1/16 X 21-5/16 X 2-1/4
1-9/16 X 2-1/21-13/16 X 2-3/42-1/16 X 32-15/16 X 3-1/42-9/16 X 3-1/22-13/16 X 3-3/43-1/16 X 43-5/16 X 4-1/4
3-9/16 X 4-1/24-1/16 X 54-5/8 X 5-1/24-3/32 X 64-1/2 X 6-1/25 X 76-1/2 X 8-1/28 X 10
10-1/4 X 12-1/411 X 1311-3/4 X 13-3/412-1/2 X 14-1/214 X 1615-3/8 X 17-3/818 X 2019-1/8 X 21-1/422-7/8 X 24-7/8
size range
150.00150.00150.00155.00155.00155.00155.00160.00
160.00165.00200.00220.00220.00240.00240.00250.00
275.00292.00338.00344.00350.00355.00479.00514.00
575.00580.00590.00655.00745.00857.00910.00
1003.001015.00
list/100
1010101010101010
1010101010101010
1010101010101010
101010101010101010
cartonqty.
WGCS-6WGCS-8WGCS-10WGCS-12WGCS-16WGCS-20WGCS-24WGCS-28
WGCS-32WGCS-36WGCS-40WGCS-44WGCS-48WGCS-52WGCS-56WGCS-60
WGCS-64WGCS-72WGCS-80WGCS-88WGCS-96WGCS-104WGCS-128WGCS-152
WGCS-188WGCS-200WGCS-212WGCS-224WGCS-248WGCS-270WGCS-312WGCS-332WGCS-390
partnumber
59
continued on next page
Screw: 305 Stainless SteelBand: 301 Stainless Steel
3/8 X 7/87/16 X 19/16 X 1-1/169/16 X 1-1/411/16 X 1-1/23/4 X 1-3/41-1/16 X 21-5/16 X 2-1/4
1-9/16 X 2-1/21-13/16 X 2-3/42-1/16 X 32-15/16 X 3-1/42-9/16 X 3-1/22-13/16 X 3-3/43-1/16 X 43-5/16 X 4-1/4
3-9/16 X 4-1/24-1/16 X 54-5/8 X 5-1/24-3/32 X 64-1/2 X 6-1/25 X 76-1/2 X 8-1/28 X 10
10-1/4 X 12-1/411 X 1311-3/4 X 13-3/412-1/2 X 14-1/214 X 1615-3/8 X 17-3/818 X 20
size range
200.00200.00200.00200.00200.00205.00205.00205.00
205.00215.00245.00280.00280.00295.00295.00300.00
300.00330.00340.00375.00385.00335.00525.00580.00
635.00680.00715.00760.00940.00
1109.001075.00
list/100
1010101010101010
1010101010101010
1010101010101010
10101010101010
cartonqty
WGSS-6WGSS-8WGSS-10WGSS-12WGSS-16WGSS-20WGSS-24WGSS-28
WGSS-32WGSS-36WGSS-40WGSS-44WGSS-48WGSS-52WGSS-56WGSS-60
WGSS-64WGSS-72WGSS-80WGSS-88WGSS-96WGSS-104WGSS-128WGSS-152
WGSS-188WGSS-200WGSS-212WGSS-224WGSS-248WGSS-270WGSS-312
partnumber
STANDARD WORM GEAR (continued from previous page)
T-BOLT CLAMPS
T-BOLT CLAMPS
Bolt & Trunion: Galvanized SteelBand: Stainless Steel
1.34 X 1.561.59 X 1.811.72 X 1.941.84 X 2.06
sizerange
TBCS-21TBCS-25TBCS-27TBCS-29
partnumber
8.368.368.368.36
listeach
Bolt & Trunion: Stainless SteelBand: Stainless Steel
1.34 X 1.561.59 X 1.811.72 X 1.941.84 X 2.062.09 X 2.312.22 X 2.442.34 X 2.562.40 X 2.692.52 X 2.812.65 X 2.942.65 X 2.942.87 X 3.182.87 X 3.183.02 X 3.313.27 X 3.563.59 X 3.884.02 X 4.314.27 X 4.564.52 X 4.814.77 X 5.065.02 X 5.315.27 X 5.565.77 X 6.066.27 X 6.566.52 X 6.816.77 X 7.067.02 X 7.317.27 X 7.567.50 X 7.817.02 X 8.318.77 X 9.0610.65 X 10.9412.65 X 12.94
TBSS-21TBSS-25TBSS-27TBSS-29TBSS-33TBSS-35TBSS-37TBSS-38TBSS-39TBSS-41TBSS-43TBSS-45TBSS-47TBSS-49TBSS-53TBSS-58TBSS-65TBSS-69TBSS-73TBSS-77TBSS-81TBSS-85TBSS-93TBSS-101TBSS-105TBSS-109TBSS-113TBSS-117TBSS-121TBSS-125TBSS-129TBSS-170TBSS-202
9.579.579.579.689.689.689.359.359.359.359.469.469.469.799.799.799.909.90
10.5610.7810.7811.3311.3311.3311.3311.7711.8811.8811.8812.2112.2113.9713.97
10101010
bagqty
101010101010101010101010101010101010101010101010101010101010101010
sizerange
partnumber
listeach
bagqty
60
2.09 X 2.312.33 X 2.622.40 X 2.692.52 X 2.812.77 X 3.062.87 X 3.183.02 X 3.313.27 X 3.563.39 X 3.683.59 X 3.883.77 X 4.064.02 X 4.314.27 X 4.564.52 X 4.814.77 X 5.065.02 X 5.315.27 X 5.565.52 X 5.815.77 X 6.066.02 X 6.316.27 X 6.566.52 X 6.817.27 X 7.567.27 X 7.567.50 X 7.817.77 X 8.068.02 X 8.318.77 X 9.0610.65 X 10.9412.65 X 12.94
sizerange
TBCS-33TBCS-37TBCS-38TBCS-41TBCS-43TBCS-45TBCS-47TBCS-49TBCS-53TBCS-58TBCS-61TBCS-65TBCS-69TBCS-73TBCS-77TBCS-81TBCS-85TBCS-89TBCS-93TBCS-97TBCS-101TBCS-105TBCS-113TBCS-117TBCS-121TBCS-125TBCS-129TBCS-139TBCS-170TBCS-202
partnumber
8.368.368.148.148.258.258.368.368.698.808.808.808.808.808.918.919.469.469.579.579.689.689.79
11.1711.1711.1711.1712.0213.3713.73
listeach
101010101010101010101010101010101010101010101010101010101010
bagqty
PHONE 800-367-3678FAX [email protected]
J
61
DOUBLE BOLT CLAMPS
7/81-3/161-5/161-3/42-3/16 2-5/163-3/16 3-7/1644-1/24-11/165-1/26-1/86-7/87-3/88-1/48-15/169-5/1611-3/1613-3/1615-1/16
hoseo.d. min.
1-1/81-5/161-17/321-31/322-9/162-15/163-3/43-13/164-3/85-1/85-1/85-15/166-7/87-3/888-7/89-3/411-3/8131517-1/2
hoseo.d. max.
SL-29SL-34SL-40SL-49SL-60SL-76SL-944004635255506006757698188759881125127514501700
partnumber
3.233.454.646.426.917.63
13.5615.8215.8222.2222.2223.3326.3032.5250.9945.6548.9399.09
112.76186.28227.08
list each
IMPORTED CLAMPS
SPIRAL CLAMPS(right hand a.k.a. clockwise)
1-1/222-1/2345681012
hosesize
SC-150SC-200SC-250SC-300SC-400SC-500SC-600SC-800SC-1000SC-1200
partnumber
12.3113.8116.2917.3819.3226.7926.3230.1942.3543.55
list each
Plated Steel
Ductile Iron
62
4004635255506006757698188759881125127514501700206N206S206SSA-316A920AA-316AA-ALAA-BRA-ALA-BRA-DIAHWA-PPASA-SSASV-ALB-316B-ALB-ALSB-BRB-DIBFBFFBBFFB-NBFFSBFFS-NBFGSBFHBBFHB-NBFHSBFHS-NBFMBBFMB-NBFMSBFMS-NBFPBFSBGBGNBHBHPBHSBMBMFBBMFB-LBMFB-N
BMFSBMFS-LBMFS-NBMGSBMHBBMHB-LBMHB-NBMHSBMHS-LBMHS-NBMMBBMMB-LBMMB-NBMMSBMMS-LBMMS-NBMPB-PPBSGBSGSB-SSC&G-LOCKPINC001C2C25C-316C-316-CCABC-ALC-AL-CC-ALSCBBC-BRC-BR-CC-DICGSSCJDCCJDC-ACJDPCJDP-ACJFSCJFS-ACJFUCJHSCJMSCJNCJN-ACJSSCJTSCJVSCJVS-ACJWSCL-316-CCL-AL-CCLIPCPCP-SC-PPC-S-CCSB
C-SSD-316DA-316DA-ALDA-BRD-ALD-ALSD-BRDC-316DC-ALDC-ALSDC-BRDC-DIDC-PPDC-SSDD-316DD-ALD-DIDP-316DP-ALDP-BRDP-DID-PPDP-PPDP-SSD-SSDSV-ALE-316E-316-CE-ALE-AL-CE-BRE-BR-CE-DIE-PPE-S-CE-SSFF-BF-316FABF-ALFBBF-BRF-DIFEFF150SFF150SSFHAS-CFHASS-CFLPSFLSSF-PPFPS-SFPSFPS-LFPS-FFRAC-CFS150SFS150SS
partnumber
pagenumber
partnumber
pagenumber
partnumber
pagenumber
61616161616161616161616161611111111559191919
15,1915167
1658151916
16,1916161651303130318
30313031303130315251203051528
51303031
3030318
303030303030303031303031521688
162059595916157
1615167
1615161536363636363635353536363535353535151529585816157
1617191919
17,19171718181818181818191917181818181718181719171517151715171715175353177
18,197
18182912121212444518
43,4443,44
4444111212
PART NUMBER INDEX
FSBFSSF-SSFSS-WFT150SFT150SSFVGDCGDSGFSGFSSGHFGHMGHSGHWGJFGJF-HWGJFSGJMSGJMSSGJSGJSSGMSGNGWSSHAAHABHAGSHAGS-CHAGSS-CHAGSSHAHASTHAHAST-CHALPS-CHALPS-C SWHALSS-C SWHAPSHAPS-CHAPS-C SWHASHAS-BVHAS-C SQHASSHASS-BVHASS-CHASS-C SQHASS-C SWHCBHCPSHCSSHDSHEHEPSHESHESSHFSHJFHJSHMSHN
HRPBHRPSHRPSSHRSHRSSICIC-LIC-SIDIMSIMS-HWIMSSJJSLHRPSSMAMBMEMSNBHPCTNPFNPMNPSNSNSTANSTBNSTDPCTF-CPCTFBHPCTGBPCTGSPCTM-CRGJFRGJFSSRGNRGNSSRHJFRHNRHSRN-SRNRN-LRN-XLRNS-SRNSRNS-LRNS-XLSSALSANSCSGPCSHSSLSMSPS-SSPSSSMSSS-SSSS
SWTTBCSTBSSTC-CTC-C 316TCBTCCTCGBTCGSTCR-CTCR-C 316TFTF-NTFSSTGTGNTHAS-CTHASS-CTHSTLFTLF-LTLF-NTLFSSTLHTLH-LTLH-NTLHBTLHB-NTLHSSTLMTLM-LTLM-NTLMSSTMTM-NTMSSUFUFSSUGUHUH-iUH-CUHSSULUL9ULFULHULMULWUMUMSSVGVOWCWGCSWGSSWN
partnumber
pagenumber
partnumber
pagenumber
partnumber
pagenumber
743,44
174012128
242424245252525223232424242424242424555
111155
111111115
111155
1155
111111666
2529666
2525252525
205
2055
2626265823232359572077
297
405252526777
4040404040232324242525866666666
58463961158
6151
45,46,4745,46,47
5147
46,47
75860603939393939393939313231203212128
313132313131323132313131323131323129292929292929575829292929292920242659607
63
PHONE 800-367-3678FAX 800-367-3670
206 Hose UnionAir Hammer CouplingsBall & Socket CouplingsBand Clamps and ToolsBarbed Insert Fittings (Steel, Brass, Stainless)Brass Push-on FittingsCam & Groove Couplings, Standard COBRACam & Groove Couplings, Campbell COBRA Cam & Groove Gaskets and HandlesCampbell Coupling Selection Guide ChemJoint Male StemsChemJoint Viton Seal CouplingsClamps, BandClamps, Double-Bolt (imported)Clamps, Interlocking 360 U-BoltClamps, SpiralClamps, T-BoltClamps, Worm GearCombination NipplesCone Strainers (for use with Part C's)Crimpnology NipplesDouble-Lock CouplingsFerrules, All CrimpnologyFerrules, BrassFerrules for Campbell COBRAFerrules for ChemJoint Viton Seal CouplingsFerrules for Crimpnology NipplesFerrules, Light DutyFerrules for Viton Seal Ground Joint CouplingsFlangesFoot ValvesGarden Hose CouplingsGlossary of Campbell Crimpnology TermsGround Joint Couplings, Campbell Viton Seal Ground Joint Couplings with Staked FerruleHeatWaveInterlocking Male Stem with Staked FerruleInterlocking U-Bolt ClampsMale Stems, ChemJointMale Stems, InterlockingMale Swivel Crimpnology NipplesMendersNST Suction Hose CouplingsNitrogen CouplingsPCT FittingsReducing Nipples (TBE)Sanitary Tri-Clamp FittingsSanitary Tri-ClampsSanitary Machined FerrulesSight GlassSingle-Lock CouplingsSleeves for Cam & Groove CouplingsSleeves, All CrimpnologySleeves for Suction Hose CouplingsSleeves for Ball & Socket CouplingsStrainersSuction Hose CouplingsSuction Hose Couplings (imported)Swivel Crimpnology NipplesSwivel Male Stems
11258
57-595152
15-1915201
3535-3657-59
61266160
59-605-615
11-1234-3543-44
5343-4443-4443-4444-4530, 44
128
5248
23-242323232635231167
30-32406
39393915
30-3145-4645-4646-4746-47
877
1123
64
ALPHABETICAL INDEX
6292929264040
59-608
TOE NipplesUniversal Couplings, CampbellUniversal Couplings (standard imported)UniversaLock CouplingsWhip Check Safety CablesWine FittingsWine FerrulesWorm Gear ClampsWrenches (Spanner & Hydrant)
WE WORK GREAT UNDER
PRESSURE!
WARRANTY – Campbell Fittings, Inc. warrants the products described herein to be free from defects in materials or workmanship for a period of one year from the date of shipment by Campbell Fittings, Inc. under normal use and service. The obligation under this warranty is limited to replacing or repairing, without charge, any part supplied by Campbell Fittings, Inc. proven to have been defective at time of shipment, and is expressly conditioned on the Purchaser’s giving Campbell Fittings, Inc. immediate notice upon discovery of the defect. Campbell Fittings, Inc. shall have the option of requiring the return of the defective material (transportation prepaid) to establish the claim.
This warranty shall not apply if the product has been altered or repaired by others, and Campbell Fittings, Inc. shall make no allowance or credit for such repairs or alterations unless authorized in writing by Campbell Fittings, Inc.
The foregoing warranty is the only warranty applicable to the products described herein, and any previous agreements, representations or warranties, oral or written, are hereby cancelled. No other expressed or implied warranties shall apply, including but not limited to implied warranties of merchantability and fitness for a particular use.
Under no circumstances will Campbell Fittings, Inc. assume any liability whatsoever for any consequential or contingent damages.
PRODUCT CHANGES – The right is reserved to make changes in pattern, design or material when deemed necessary, without notice. Products which have become obsolete by reason of design change or discontinued as a manufactured item may not be returned for credit.
RETURNED GOODS – Materials must not be returned unless consent has first been obtained in writing from Campbell Fittings, Inc. All materials approved for return must arrive properly packaged and pass our inspection criteria before credit will be issued. Returned products are subject to restocking fees.
RESPONSIBILITY – We will not be responsible for delays resulting from strikes, accidents, negligence of carriers, or other causes beyond our control.
RISK – All goods are at the risk of the Purchaser after they have been delivered to the carrier and receipt obtained for same (in good order).
ORDERS – Are subject to acceptance at Campbell Fittings, Inc., Boyertown, PA 19512.
SPECIAL PRODUCTS – Requests for cancellation of orders made to customer’s specifications are not refundable and will not be considered if the manufacture of material is in process when the request is made.
ERRORS, SHORTAGES, ETC. – Claims for errors, shortages, etc. must be made on receipt of goods, otherwise no allowance will be made.
PRICES AND QUOTATIONS – All prices and quotations are subject to change without notice.
TAXES – Any tax that may be imposed by law on the sale of articles made or sold by this company shall be added to the sale price of such articles.
LIABILITY WARNING – Campbell Fittings, Inc. has no warranty applicable to fitness for the purpose of a particular use of any of the products it sells or issues as samples and shall not be responsible for any loss involving its products. It is entirely the responsibility of the end user or installer to be sure that fittings, hose, and their applications are compatible.
Our Guarantee of Quality
Campbell Fittings
65
Manufacturing & Offices:Campbell Fittings, Inc. Box 417 301 S. Washington St. Boyertown, PA 19512
Warehouse Locations:Boyertown, PA Houston, TX Ceres, CA
U.S. and Canada:phone 800.367.3678 fax 800.367.3670 email [email protected] campbellfittings.com
International:phone 610.367.6916 fax 610.367.0689 email [email protected]
M E M B E R
Affiliations: