the global warming problem can be resolved

A MIRACLE DISCOVERED TO STOP THE GLOBAL WARMING DISASTER. Found microbes eliminate CO2 CO SO2 NO2 in fossil fuel By Prof. Dr. Chaitat Pairintra & Mr.Kamthorn Saengrit Discovered on 10 February 2009 www.popular-gov.com 1. Innovation source Discovery process from conception, lateral thinking and biological method enable innovation in biotechnology to benefit the world community in solving the critical problems facing the threat of global warming which will cause tremendous damage to mankind. 2. Innovation philosophy The United Nations (UN) in cooperation with an international team will resolve the 10 types of disasters caused global warming. All parties will benefit by sharing sustainable natural resources. 3. Innovation purpose 1. Biotechnology will be used to remove greenhouse gases (CO2) and other hot gases. We will recommend a process to eliminate the cause. Not a solution to the present problem. 2. To resolve and prevent 10 types of global warming disasters. To help the world have a healthier environment.

Stop the Global Warming Disaster

BIO-NANO INNOVATIVE RESEARCH CENTER (B-NIRC)619 Maliwan Rd., T. Baanped, A. Muang, C. Khon Kaen, 40000, ThailandTel: +66 43-202208 Fax: +66 43-333389 E-mail: [email protected] Website: www.popular-gov.com

www.popular-gov.com

Innovation Set for Business 1) 6 Patents

1. BIO-NANO # 1 (BG / CG): Is a bio-organic powder compound with a natural gas CO2 product elimination. Purpose: To eliminate CO2, CO, SO2, and NO2 from natural gas power plants to a near zero level.

2. BIO-NANO #2 (BC / CC): Is a bio-organic powder compound with a coal CO2 product elimination. Purpose: To eliminate CO2, CO, SO2, and NO2 from coal power plants to a near zero level.

3. BIO-NANO #3 (BF / CF): Is a bio-organic powder compound with an oil fuel CO2 product elimination. Purpose: To eliminate CO and HC from fuel vehicles to a near zero level.

4. BIO-NANO #4 (BI / CI): Is a bio-organic powder compound with an industrial coal CO2 product elimination. Purpose: To eliminate CO2, CO, SO2, NO2, and HC from industrial factories to a near zero level.

5. BIO-NANO #5 (BA / CA): Is a bio-organic powder compound with an atmospheric CO2 product elimination. Purpose: To eliminate CO2, CH4, NO2, and SO2 in the atmosphere and reduce the cumulative level to near zero.

6. BIO-ORGANIC #1 (BOG): Is a bio-organic powder compound with a soil and gas CH4, N2O product elimination. Purpose: To eliminate CH4 and N2O gases from rice paddies in agriculture and forestry sectors.



www.popular-gov.com

Innovation Set for Business (cont.) 2) 6 Copyrights

1. BIO-ORGANIC #2 (BOF): Is a Bio-Organic powder compound of Bio-Organic Fertilizer Purpose: To increase crop yields and sustainable agriculture by Bio-Organic Fertilizer uses, to boost yields, organically, by an increase of 50-70%.

2. BIO-ORGANIC #3 (BOBW): Is a Bio-Organic powder compound of

BIO-NANO Water Purpose : To produce high quality Bio-Water, to eliminate all polluted particles from household water use, and from the water sources of major cities.

3. BIO-ORGANIC # 4 (BOWW): Is a Bio-Organic powder compound for

Waste Water Treatment Purpose: To treat waste water, reduce water pollution, improve OD, BOD, COD, etc.

4. BIO-ORGANIC # 5 (BOGT): Is a Bio-Organic powder compound for

treating Garbage Disposal Treatment Plants Purpose: To treat garbage disposals and reduce pollution in air, water, and soil producing bio-compost for agriculture and forestry uses.

5. AGR. # 1(C&EM): FOOD AND AGRICULTURAL COMMUNITY

DEVELOPMENT. Purpose: To generate revenue, build community food resources and decrease poverty world-wide. The development of water resources, community life and human resource development.

6. FORESTRY # 1(RF): REFORESTRATION.

Purpose: To enhance CO2 absorption by tree photosynthetic process, to produce food and fuel from the forest, and to benefit their surrounding communities.



www.popular-gov.com

How to optimize the purchase of

patents & copyrights.

Method 1 (All)

Method 2 (All)

Method 3 (Separate / Sell)

Method 4 (All)

Method 5 (All / Fund)

United Nations Business Owned Business Owned Business Owned Business Owned

Immediate World-Wide Benefit

Slower World-Wide Benefit




Improved Environment World-Wide





Tax Decrease Tax Decrease Tax Increase Tax Increase Tax Increase

Free world-wide World Property Private Property Private Property Private Property

Sell outright Sell outright Franchise system Franchise system Franchise system



www.popular-gov.com

STRATEGIES TO STOP GLOBAL WARMINGBY SUSTAINABLE BIO-NANO TECHNOLOGY

Target 1Source/ManufacturerPetroleum ProductsWith CO2 CO SO4

The fuel industry.- Petroleumrefineries.- Coal

- Pollution- Greenhouse gases / Causedbyoilrefineryprocess.- Natural Gas used by biological innovation.RemovingCO2 and other

Note: Red Left to right is Green house effectGreen Righttoleftis Eliminating Green house effect by productofinnovation

www.popular-gov.com

UN

WB

EU

Asian

GP

NGO

IPCC

The world

Power Plant GroupGas/Petrol/Coal

Industrial GroupGas/Petrol/Coal consumer

Vehicle Industrial GroupGas/Petrol consumers

Target 2Consumer

ResultGreenhouseeffect

B-NIR Group Send innovation info.

Target 3Destination

The world has been adversely affected by

GHG.

Reduce GHG.Stop the globalwarming crisis.

6 types of fuelStorage

Biofuel to Clean Energy Production ProcessCO2 CO SO2 NO2 to Near Zero Level

Oil refinery

Analysed by OPUS 20 / Bio + Gasolene before burning

Biofuel analysis report

Bio +6 types

fuelPump

Smoke quantity from CO2 burning

is near zero

Clean Fuel

Coal to Clean Energy Production ProcessCO2 CO SO2 NO2 to Near Zero Level

CleanCoal

CoalGrinder

Bio+CoalmixerPump

Coal mine Coal Power Plant

Bio Coal analysis report

Analysed by OPUS 20 / Bio + Coal before burning


is near zero

Bio gas analysis report

Bio gas to Clean Energy Production ProcessCO2 CO SO2 NO2 to Near Zero Level

Bio Mixerpump

Natural gas separator

Analysed by OPUS 20 / Bio + Natural gas before burning

Bio gas power plant

Natural gas Bio Gas


is near zero

Clean Gas

Technology Matters

TECHNOLOGY PRODUCT DESCRIPTION 1. PRODUCT: Name the product according to function.

Fuel CO2 Eliminated Bio-Organic Product

It is a powder compound of microbials of 1010-15 cfu /g and organic materials. 2. INDUSTRIAL APPLICATIONS: Give the industrial sectors affected by the

product. Downstream the oil refinery industries, automobile manufacturers, power energy plants, cement industries, bio-fuel industries, natural gas industries etc. which are the customers.

3. PRINCIPLE: A presentation of the physical or technical principles used,

without revealing the invention. Bio-nanotechnology (Micro-organisms as biotechnology and biomolecules of

organic materials as nanotechnology) 4. COMPETITION: Set forth the competing technical and physical principles.

None on record. It presently is a State-Of-The-Art invention.

5. ADVANTAGES: Cite the technical and economic advantages.

Technical advantages: Biotechnology as an environmentally friendly technology and Nanotechnology as a powerful invention technology. Economic advantages: It is extremely cost-effective. The cost is approximately 1 cent/1/2kgCO2. The specimens are very common and are available at every culture bank world- wide.



www.popular-gov.com

6. APPLICATIONS: Situate the product and the benefits to the intended market. The product is universal and distinguished from others by not being an oil additive since it is the by product in the oil refinery process.

The main applications are to eliminate GHG and improve oil quality (octane and cetane value- added) by consuming all inorganic gases (CO, CO2, SO2, NO2, etc.) and producing CH4, automatically.

7. POTENTIAL MARKET: State any new features of these applications and the

renewal of any existing ones.

We have not yet conducted a potential market analysis. Perhaps our dealers may help us with this task. On the global warming crisis, (as part of CO2 emission from fuel), we believe that it will greatly benefit the entire world.

8. MARKETING CONTEXT: When the proposed system is ideally adapted and ready for marketing.

The market date of this product is uncertain since this is the first time being made public.

We anticipate the invention will be highly beneficial since the product has dual functions, i.e. the CO2 reduction in oil, as well as, the mitigation of CO2 emissions into the atmosphere which is the major component of the GHG global warming crisis.

9. EXPLOITATION: Technology Transfer or Exclusive Exploitation License or

Business Alliance.

These technologies are almost 99% reproducible, if the directions are strictly followed. The technology transfer is possible world-wide.

Regarding our exclusive exploitation license, we intend to make further decisions regarding this once we reach a negotiation.

For a business alliance, we still need more information on the subject matter. We appreciate any suggestions you might have regarding this and we will carefully consider each and every suggestion.



www.popular-gov.com

Technical Matters

QUESTIONS & ANSWERS Q: Please explain what are the economic benefits when these sectors use the product? What changes occur that either enables companies to save money, or make money? A : The economic impact is great and hopefully our planets climatic changes (if IPCC agree) will be improved within 5 years 1. Oil Refinery:

1) CDM -657 crude oil refineries around the world are expected to gain benefit from carbon credit (if any) under UNFCCC, i.e. 2.16 kg / l and 2.67kg / l of CO2 from diesel and benzene, respectively.

2) CSR- What will be happen when something bad is changed into something good.

3) Save our planet Earth! World oil consumption stands at about 85 million barrels per day.

This would emit approximately 28 million tons of diesel C02 or 35 million tons of benzene CO2, per day. Yearly, this amount is astronomical as the atmosphere already contains over 3,000 giga tons of gas waste.

2. Automobile manufacturers: 1) Cost saving- There is no proposed research and developement on engine

combustion for all US, EU, Japan, etc. automobile manufactures. There is no need for a target-set on EU-IV or other car models in 2012 since fuel CO2 emission from these 2 billion cars around the world would be reduced to near zero levels.

2) New strategic approach –There would be an increased return on sale.



www.popular-gov.com

3. Energy Power Plants

1) CDM- A recent report* stated about 700 tons of CO2 per minute were being

emitted from electric coal power plants. However, fossil fuel power plants also produced more than 720 kg / KWh of C02 per minute. 2) CSR-Electricity cost will be reduced by roughly over 30%. No more street demonstrations, no need to spend enormous amounts to build nuclear power plants etc.

4. Cement Industries 1) CDM-Most of these industries use fossil fuel energy sources.

2) CSR-We have a technology for improving cement quality by a cohesive

method, and eliminating gas from both cement and coal. That would then eliminate dust or sulphur particles in the environment causing acid rain. This method is CO2 emission free. The benefits have far reaching potential world-wide. 5. Bio-fuel industries

1) Quality improvement- Bio products improve the quality of bio-fuel. We have certified test results from PTT verifying this.

2) CSR-We are now conducting a small project using bio-fuel. We do not

endorse the industries use of esterification in processing bio-fuel since we consider KOH or NaOH as chemical pollution. About 10 % of the residue severely affects the earth during each and every bio-fuel production.

6. Natural Gas Industries

We also have done research in this field.

*www.thaingo.org/HeadnewsKan/coal010248.htm



www.popular-gov.com

Q: Please give an explanation on how the CH4 would be commercially produced? A: Results from our product tests indicated (without any additive) that both cetane (from B5)and octane (from gasohol 91) were increased about 8.7% and 1%, respectively. This resulted from co-existing and microbial and symbiotic activities. Although, the results are small, statistically, but CH4 value-added is another benefit of commercial production.

Q: What does ‘’automatic life cycle’’ mean in this context?

A: I would define ‘’automatic life cycle’’ as the process of ‘’spontaneous degeneration (of CO2) and regeneration (of CH4) of all living things on earth’’ However, it is definitely not synthetic life (GMO) that consumed CO2 then excreted CH4 as some scientists are presently researching.

Q: To what ‘’oil product’’ or at what stage of the ‘’oil refinery process’’ is the powder compound of microbes added?

A: We can add the bio-product to any fuel oil, fossil or bio-fuel, then filter it by an oil filtering machine. Our result showed that there were both water and sediment in the oil sample at < 0.005%. According to our yet to implemented plan, the bio-product will be added either before (in crude oil) or after distillation (in oil product). This will depend upon what will best suit the oil refinery process.

Q: What are the commercial benefits to an oil company being able to produce CH4 by the automatic life cycle? A: The production of CH4 is not our main objective since we are aiming at the

elimination of inorganic fuel gas (CO, CO2, SO2, NO2) after combustion. While the microbes can, as well, be utilized as hydrocarbon, or as organic energy sources before combustion. Therefore, we consider CH4 as a fringe benefit to the oil company. The oil company would be free to sell CH4 if they choose.

Q: How and why is it that your identified microbes are different from technologies used in the existing bio-mass industries for the production of ethanol from corn? A: (How): It is a different group of microbes. A: (Why): They have different path ways.



www.popular-gov.com

Q: What are your plans to protect the invention? Q1: Do you plan to apply for Patent Protection? A1: Yes, I do and would appreciate any assistance you might be able to offer. Q2: Do you have money available for the Patent Protection Process? A2: No, and I have no idea what the costs might be, but we envision the costs

will be high. Any advice on what procedural steps need to be taken is gratefully appreciated.

Q: We need to understand what volume of CH4 is released in the creation of the 2kg reduction of CO2 per liter of oil treated. A: 1) Based on our data, I conclude that the “volume of CH4” which we considered

as cetane and octane added (without ETBE / MTBE /etc), is the percentages increased from the set limit (e.g. 47 vs 51.12=8.76% and 91 vs 91.1=1% or 80 vs 81.4=1.01%).

2) From IPCC fossil oil emission data, I averaged the emission from diesel 2.16 kg/l and from gasoline 2,67 kg/l into 2kgCO2/l . Therefore, from our data, 1 liter of oil, the CO2emitted = 2kg and produced CH4 = 8.76% and 1% for diesel and gasoline, respectively.

Q: Is our understanding correct that 1 gram of powder product costs 1 cent to produce and treats 1 liter of oil to produce the 2kg CO2 reduction?

A: 1) Yes, that is correct in term of CDM / carbon trading. Actually, we prefer it to be offered free of charge. Do you agree to make that possible? 2) This is an incredibly low price for healing our sick world.

Q: Please tell us more about the methods you mentioned to reduce GHGs in natural gas, sulphides in coal, and increase the cohesiveness of cement.

A: 1) Regarding petrol, I used a “Biological Method” (without any chemical synthetics or other methods) in reducing GHGs in natural gas, in clean coal technology, and in all fuel energy consumption manufactures. More precisely, my main methodology is “Microbial Biotechnology”. Details will be elaborated on later. 2) I believe in the advantages of bio-technology, so I decided to set 3 basic principles that it is pollution free, cost-effective, and accessible to all.



www.popular-gov.com

Q: Is it your idea to produce the powder compound at the B-NIRC and export it to customers or is the B-NIRC only for production development?

A: Yes, it is possible in both cases. In the first case, if we sell our license exclusively, we will continue to serve as the consultant team for production. While in the second case, we will have to export our bio- product. It depends upon the license agreement which will be established later. However, B-NIRC will assist in every way possible for both cases to be successful.

Q: Is there some other method of supply needed?

A: Yes, for example, an B-NIRC technician will hand-carry the “starter culture” to the customers for extension, then the product will be produced locally. Each step must be done under our close supervision.



www.popular-gov.com