the commercial led lighting specialist our service, our people, your choice ja n ua ry
TRANSCRIPT
20
16
The Commercial
LED Lighting Specialist
Our Service, Our People, Your Choice
JAN
UA
RY
McDonald’s
“The light quality in the kitchens is much better; the LED Tubes give a brighter, crisper light which the employees prefer working under. The reduced electricity consumption is providing a payback in less than two years, and with electricity price increases it was prudent to install the LED Tubes now.”
- Eddie Leligdowicz, McDonald’s Franchisee
The Big Yellow Self Storage Company
“Our decision to install LED lighting across our storage facilities has made a positive impact on The Big Yellow Self Storage Company’s energy plan.”
- David Knight, Estates and Facilities Manager, The Big Yellow Self Storage Company
British Library
“Unlike fluorescent tubes, the LED Tubes produce no UV light which would be damaging to the books.”
- Patrick Dixon, Head of Building Services, British Library
clients’ comments...
127
131
123
PRODUCT DIRECTORY
TECHNICAL GLOSSARY
CONTENTS
FEATURES & BENEFITS OF LED LIGHTING
WHO TO CONTACT
125
20
28
40
60
CASE STUDIES
FISH BROTHERS GROUP
BRITISH LIBRARY
NISA LOCAL
NEWTON ABBOT RECREATIONAL TRUST
THE BIG YELLOW SELF STORAGE COMPANY
REIGATE & BANSTEAD BOROUGH COUNCIL
74
90
32
RED FUNNEL 82
VIRIDOR
118MEET THE MANUFACTURERS
HERTFORDSHIRE CONSTABULARY 117
LED PANEL LIGHTS 7
LED NCF LUMINAIRES21
3 HOUR EMERGENCY KITS
113
LED HIGH BAYS99
LED LIGHTING CONTROLS
107
new
LED BATTEN LUMINAIRES29
new
LED T5/T8 TUBES41
new
LUMINAIRES PRE-WIRED FOR LED
47
LED DOWNLIGHTS53
new
LED SLIMLINE FLOOD LIGHTS
91
new
LED HIGH POWER FLOOD LIGHTS
83
LED WALL PACKS79
new
LED IP54 2D BULKHEADS
67
LED IP65 2D BULKHEADS
75
new
LED LINEAR LUMINAIRES33
new
LED ZONES 1 & 2105
LED EMERGENCY LIGHTS
61
LED GEAR TRAYS 71
1COMPANY
NET LED Lighting | Our Service, Our People, Your Choice
We appreciate that purchasing quality LED lighting products from suppliers that consistently deliver excellent results and value for money is tough in any market, especially with the number of manufacturers growing monthly. Our aim is to be a supplier that you can trust, with credibility and a track record of providing quality, innovative products at competitive prices.
NET LED was established in 2009 and partners with manufacturers based in the UK and around the world to distribute a wide range of commercial LED products on their behalf.
However, we recognise the need for more than just great products and so strive to achieve excellence in customer experience, consumer value, employee talent, and consistent growth. This combination of quality products and outstanding customer service is our route to achieving our mission: “to be the premier manufacturers’ distributor of LED lighting products”.
We distribute through resellers, including national electrical wholesalers, being a preferred supplier in many cases, and through hundreds of independent electrical wholesalers.
Operating from purpose-built offices and warehouse distribution facilities in Cambridge, we hold large stocks available for same day dispatch for orders placed up to 5 p.m. for distribution across the UK and Ireland.
Our supply chain and processes are all accredited to ISO 9001 and 14001 ensuring the highest standards for quality and environmental management. These quality standards are further endorsed as NET LED is an approved member of the Lighting Industry Association.
NET LED is an official licensee and member of the Philips LED Luminaires and Retrofit Bulbs Licensing Program covering Philips’ patented technologies which are incorporated in many commercial LED products, allowing you to purchase in confidence.
We thank all our customers for their business to date and look forward to continuing to serve you as your commercial LED lighting specialist.
The Commercial LED Lighting Specialist
ISO 9001:2008FS 590684
ISO 14001:2004EMS 590685
T: 01223 851505F: 01223 851506E: [email protected]
www.netled.co.uk
NET LED LIMITEDEvolution Business ParkMilton RoadImpingtonCambridgeCB24 9NG
1
www.netled.co.uk | 01223 851505
“Hand-held barcode scanners streamline processes, allowing us to pick and pack with speed and accuracy”
Our product range is available exclusively through electrical wholesalers.
As part of your distribution chain, we recognise the importance of providing a quality, reliable service so that you are able to do the same for your customers.
We work with our strategic distribution partner UPS to provide a next working day delivery service for all orders placed before 5 p.m. (please allow up to 48 hours for Scotland, Northern Ireland and the Isle of Man). Delivery can be direct to your branch, or to a UPS Access Point for your customer to collect.
We offer the opportunity to order through our web portal or via our dedicated Electronic Data Interchange (EDI) system. Ordering in these ways feeds directly into our warehouse team’s hand-held laser barcode scanners, streamlining your processes and ours, allowing us to pick and pack your orders with speed and accuracy.
Ordering by EDI is also great for the environment, moving order processes from paper to digital.
Making life easierOur Service
2
ISO 9001:2008FS 590684
ISO 14001:2004EMS 590685
QUALITY & ENVIRONMENTAL MANAGEMENTBSI ISO 9001, ISO 14001
We aim to ensure all products and services meet high standards. For this reason, we have ensured our processes are compliant with and certificated by the British Standards Institution (BSI) to ISO 9001 and ISO 14001 for quality and environmental management respectively.
RECYCLINGCLARITY WEEE COMPLIANCE
We take our recycling responsibilities seriously, ensuring all of our processes are compliant with the regulations set out in the Waste Electrical and Electronic Equipment (WEEE) directive.
NET LED is a registered member of the Clarity WEEE compliance scheme. All of our products are marked with the appropriate recycling logo, indicating the appropriate manner of disposal.
NET LED Lighting | Our Service, Our People, Your Choice
Certifications
Certificate of RegistrationQUALITY MANAGEMENT SYSTEM - ISO 9001:2008
This is to certify that: NET LED LimitedEvolution Business ParkMilton RoadImpingtonCambridgeCB24 9NGUnited Kingdom
Holds Certificate Number: FS 590684
and operates a Quality Management System which complies with the requirements of ISO 9001:2008 for thefollowing scope:
The sales and distribution of LED lighting.
For and on behalf of BSI:Pietro Foschi - Strategic Delivery Director
Original Registration Date: 22/01/2013 Effective Date: 22/01/2013
Latest Revision Date: 20/04/2015 Expiry Date: 22/01/2016
Page: 1 of 1
This certificate was issued electronically and remains the property of BSI and is bound by the conditions of contract.An electronic certificate can be authenticated online.Printed copies can be validated at www.bsigroup.com/ClientDirectory
Information and Contact: BSI, Kitemark Court, Davy Avenue, Knowlhill, Milton Keynes MK5 8PP. Tel: + 44 845 080 9000BSI Assurance UK Limited, registered in England under number 7805321 at 389 Chiswick High Road, London W4 4AL, UK.A Member of the BSI Group of Companies.
Certificate of RegistrationENVIRONMENTAL MANAGEMENT SYSTEM - ISO 14001:2004
This is to certify that: NET LED LimitedEvolution Business ParkMilton RoadImpingtonCambridgeCB24 9NGUnited Kingdom
Holds Certificate Number: EMS 590685
and operates an Environmental Management System which complies with the requirements of ISO 14001:2004 forthe following scope:
The sales and distribution of LED lighting.
For and on behalf of BSI:Frank Lee, EMEA Compliance & Risk Director
Original Registration Date: 22/01/2013 Effective Date: 23/01/2013
Latest Revision Date: 04/06/2015 Expiry Date: 22/01/2016
Page: 1 of 1
This certificate was issued electronically and remains the property of BSI and is bound by the conditions of contract.An electronic certificate can be authenticated online.Printed copies can be validated at www.bsigroup.com/ClientDirectory
Information and Contact: BSI, Kitemark Court, Davy Avenue, Knowlhill, Milton Keynes MK5 8PP. Tel: + 44 845 080 9000BSI Assurance UK Limited, registered in England under number 7805321 at 389 Chiswick High Road, London W4 4AL, UK.A Member of the BSI Group of Companies.
• clarityWASTE ELECTRICAL AND ELECTRONIC
EQUIPMENT REGULATIONS 2013
THIS IS TO CERTIFY THAT
NET LED
IS A MEMBER OF THE PRODUCER COMPLIANCE SCHEME
CLARITY ENVIRONMENTAL LIMITED
FOR THE 2016 COMPLIANCE PERIOD
REGISTRATION NUMBER:
WEE/J H2054ZS
David Adams (Director)
Clarity Environmental Limited is a Compliance Scheme approved by the Environment Agency under the WEEE Regulations (Approval No. WEE/XP3538PP/SCH).
3
Our PeopleHere for you
...have a Regional Sales Manager to listen to and understand your needs. They work with you to take care of your business requirements and help you to help your customers.
...have an office-based Sales Support assistant working alongside your Regional Sales Manager to ensure you receive outstanding customer service at all times.
...have direct access to our experienced Technical Support team, who are on-hand to answer your technical queries and provide data sheets, IES Data Files and lighting guides.
...have a team of order processing and warehouse operators equipped with the latest Electronic Data Interchange (EDI) technology and hand-held laser barcode scanners, dedicated to despatching your orders accurately and efficiently to wherever they are needed, on time every time.
...can be confident that we regard our people as our greatest asset, investing considerable time and money in their training and development to ensure they meet our requirements of efficiency and service for both our customers and suppliers.
You...
“Working with you to ensure you receive outstanding customer service at all times”
4
NET LED Lighting | Our Service, Our People, Your Choice
PHILIPS LED LUMINAIRES AND RETROFIT BULBS LICENSING PROGRAM
We are a member of Philips’ LED Luminaires and Retrofit Bulbs Licensing Program.
This license enables us to distribute technologies patented by Philips that can be found in most LED lighting products.
This means we are able to continue to bring innovative, energy saving commercial LED lighting to the marketplace.
THE LIGHTING INDUSTRY ASSOCIATION
We recognise the importance of trade association representation and ensure we are active members of the industry we work in. The Lighting Industry Association seeks to represent members that demonstrate the highest degree of professionalism, expertise and ethical standards. NET LED has been a proud member of the LIA since 2010.
EEF - THE MANUFACTURERS’ ORGANISATION
EEF is an organisation that champions the manufacturing industry in the UK and across the EU, helping to create and maintain the best possible business environments where manufacturers and wider industries can innovate and thrive.
NET LED is proud to be an approved member of the high-profile EEF community.
Certifications
5
We produce quality printed and digital literature for all products in our range. These contain key features and benefits, technical specifications, and diagrams. They are available on request or on our website at www.netled.co.uk.
Our entire product range is covered by a 3 year warranty as standard. This warranty can be extended free of charge to 5 years for many of our products through a simple registration process that can be completed on our website.
Many of our products are available with 3 Hour Emergency and Dimming options, as well as a range of additional mounting and suspension options.
Our Regional Sales Managers are on-hand to provide product demonstrations, staff training, and attend trade shows and breakfast mornings to meet your customers and thereby generate additional business.
Many of our most popular products are delivered in vibrant point-of-sale packaging. In addition, we can supply point-of-sale materials for the showroom and counter. These include hanging product information boards and countertop POS displays.
Your ChoiceHelping you help your customers
NET LED represents quality manufacturers, including:
6
50 %energysaving
50 ,000hourslife
WA
R R A N
TY
·EX
TENDED
LED Panel Lights are versatile and reliable. Incorporating surface-mount device (SMD) technology, they distribute light evenly across the surface of the panel.
As retrofit units replacing fluorescent tube fittings, LED Panel Lights are designed to sit in most standard ceiling grids.
Maintenance-free and with a useful light expectancy of more than 50,000 hours, LED Panel Lights provide exceptional energy savings and slash maintenance costs usually associated with replacing and recycling fluorescent tubes.
LED Panel Lights are available in edge and back-lit versions, four sizes, two colour temperatures, and with a range of additional features, including 3 Hour Emergency Kits, DALI and 1-10V dimming and suspension and surface mounting options.
A new edge-lit bi-colour LED Panel allows for selectable colour temperature - 4500K or 5500K in one unit. This product also delivers light at a lower UGR rating.
LED Panel Lights are supplied with Philips drivers as standard for all models below 60W.
Manufactured by:
LED Panel Lights
LED
PA
NEL L
IGH
TS
7
new
NET LED Lighting | Our Service, Our People, Your Choice
LED
PA
NEL L
IGH
TS
APPLICATIONS: > Replaces fluorescent tubes. > Retail, offices, schools, hospitals. > Architectural lighting. > Suspended ceiling lighting for offices.
KEY FEATURES: > High lumen output. > Philips driver as standard.* > 3 Hour Emergency Kits available. > DALI and 1-10V dimming available. > 5 Year Extended Warranty.
PRODUCT FEATURES: > Up to 50% energy savings. > Instant ON at full brightness. > Last 3-5 times longer than fluorescent tubes. > No glass - shatterproof polycarbonate diffuser. > No mercury or lead. > Easy installation. > No flicker or hum. > Maintenance-free. > No UV light emitted. > Useful life expectancy > 50,000 hours.
Driver is securely mounted on a mounting plate on the back of the LED Panel, acting as a heat sink that allows for greater airflow, prolonging the driver’s life.
Specially designed interlocking power cord ensures connector does not come dislodged during installation.
Surface mount boxes for LED Panel Lights provide a slim option for mounting on a surface that has no void behind it.Suspension kits are also available.
Specially calibrated 3 Hour Emergency Kits are available to support LED Panel Lights and LED Grid Luminaires.Emergency kits are manufactured in the UK.
www.netled.co.uk | 01223 851505 8
* Excluding NET-11-03-21/23
DRIVER AS STANDARD*
DIMENSIONS
LIGHT DISTRIBUTION CURVE
TECHNICAL SPECIFICATIONS
Input Voltage 220-240V AC
Power Factor >0.95
LED Luminous Flux 4800lm
Luminous Efficacy >90-95lm/W
LED Manufacturer Honglitronic
LED Type SMD 4014
No. of LEDs 208
Driver Manufacturer Philips
Driver Output Voltage DC 36-42
Total Circuit Power (W) 40+/-2%
Electrical Class 3
Colour Rendering >80 CRI
Lamp Viewing Angle 95°
Dimmable Optional upgrade
Operating Temp. 0 to +45°C
Lifespan 50,000 hours
Fire Rating HB
UGR Rating <19
Diffuser Material Polycarbonate
Housing Material/Frame Colour Aluminium/White
Weight 3.4kg
FEATURES & BENEFITS
• Selectable 4500K or 5500K colour temperatures.
• Prismatic diffuser for UGR rating <19.• White frame.• Mounted driver for improved airflow.• Twist ‘n’ lock power cable.• DALI (NET-29-43-01) dimming option.• 1-10V (NET-29-43-03) dimming option.• Compatible with 3 Hour Emergency Kit
(NET-19-33-03).
KEY DATA
Power 40W
Luminous Flux 3600lm
Colour Temperature Selectable 4500K or 5500K
IP Rating IP20
Dimensions 595x595x10mm
Warranty 5 Years Extended
Part Number NET-11-03-05
LED Panel LightEdge-Lit UGR<19 Bi-Colour 40W 600x600mmBuilt-in Two Colour Options 4500K or 5500K
LED PANEL LIGHTS | EDGE-LIT UGR<19 BI-COLOUR 40W 600x600mm
LED
PA
NEL L
IGH
TS | U
GR<19
Bi-C
olo
ur 4
0W
600x6
00m
m
9
DRIVER AS STANDARD
NET LED Lighting | Our Service, Our People, Your Choice
595
595 10
All units are in mm
AVERAGE BEAM ANGLE: 95°
new
RoHSIES Data Files available
TYPICALLY REPLACES
• 4 x 18W T8 fluorescent• 4 x 14W T5 fluorescent• 1 x 55W 2G11 fluorescent
LIGHT DISTRIBUTION CURVE
DIMENSIONS
FEATURES & BENEFITS
• Mounted driver for improved airflow.• Twist ‘n’ lock power cable.• DALI (NET-29-43-05) dimming option.• 1-10V (NET-29-43-09) dimming option.• Compatible with 3 Hour Emergency Kit
(NET-19-33-03).
LED Panel LightEdge-Lit 22W 500x500mm 4500K
KEY DATA
Power 22W
Luminous Flux 2000lm
Colour Temperature 4500K
IP Rating IP20
Dimensions 495x495x10mm
Warranty 5 Years Extended
Part Number NET-11-03-25
TECHNICAL SPECIFICATIONS
Input Voltage 220-240V AC
Power Factor >0.95
LED Luminous Flux 2650lm
Luminous Efficacy >90-95lm/W
LED Manufacturer Honglitronic
LED Type SMD 4014
No. of LEDs 130
Driver Manufacturer Philips
Driver Output Voltage DC 36-42
Total Circuit Power (W) 22+/-2%
Electrical Class 3
Colour Rendering >80 CRI
Lamp Viewing Angle 115°
Dimmable Optional upgrade
Operating Temp. 0 to +45°C
Lifespan 50,000 hours
Fire Rating HB
UGR Rating 22
Diffuser Material Polycarbonate
Housing Material/Frame Colour Aluminium/Silver
Weight 2.0kg
LED PANEL LIGHTS | EDGE-LIT 22W 500x500mm 4500KLED
PA
NEL L
IGH
TS | 2
2W
500x5
00m
m 4
500K
10
DRIVER AS STANDARD
495
10495
All units are in mm
www.netled.co.uk | 01223 851505
AVERAGE BEAM ANGLE: 115°
RoHSIES Data Files available
TYPICALLY REPLACES
• 3 x 36W TC-L fluorescent
LED PANEL LIGHTSEdge-Lit 40W 600x600mm 4500K/5500K
LED PANEL LIGHTS | EDGE-LIT 40W 600x600mm 4500K/5500K
FEATURES & BENEFITS
• Mounted driver for improved airflow.• Twist ‘n’ lock driver cable.• DALI (NET-29-43-01) dimming option.• 1-10V (NET-29-43-03) dimming option.• Compatible with 3 Hour Emergency Kit
(NET-19-33-03).
TECHNICAL SPECIFICATIONS
Input Voltage 220-240V AC
Power Factor >0.95
LED Luminous Flux 4800lm
Luminous Efficacy >90lm/W
LED Manufacturer Honglitronic
LED Type SMD 4014
No. of LEDs 234
Driver Manufacturer Philips
Driver Output Voltage DC 36-42
Total Circuit Power (W) 40+/-2%
Electrical Class 3
Colour Rendering >80 CRI
Lamp Viewing Angle 115°
Dimmable Optional upgrade
Operating Temp. 0 to +45°C
Lifespan 50,000 hours
Fire Rating HB
UGR Rating 22
Diffuser Material Polycarbonate
Housing Material/Frame Colour Aluminium/Silver
Weight 3.5kg
KEY DATA
Power 40W
Luminous Flux 3600lm
Colour Temperature 4500K/5500K
IP Rating IP20
Dimensions 595x595x10mm
Warranty 5 Years Extended
Part Number 4500K NET-11-03-01
Part Number 5500K NET-11-03-03
DRIVER AS STANDARD
LED
PA
NEL L
IGH
TS | 4
0W
600x6
00m
m 4
500K/5
500K
11 NET LED Lighting | Our Service, Our People, Your Choice
AVERAGE BEAM ANGLE: 115°
595
595 10
RoHSIES Data Files available
TYPICALLY REPLACES
• 4 x 18W T8 fluorescent• 4 x 14W T5 fluorescent• 1 x 55W 2G11 fluorescent
DIMENSIONS
LIGHT DISTRIBUTION CURVEAll units are in mm
LED PANEL LIGHTS | EDGE-LIT 40W 1200x300mm 4500K/5500K
LED PANEL LIGHTSEdge-Lit 40W 1200x300mm 4500K/5500K
FEATURES & BENEFITS
• Mounted driver for improved airflow.• Twist ‘n’ lock driver cable.• DALI (NET-29-43-01) dimming option.• 1-10V (NET-29-43-03) dimming option.• Compatible with 3 Hour Emergency Kit
(NET-19-33-03).• Not suitable for suspension.
TECHNICAL SPECIFICATIONS
Input Voltage 220-240V AC
Power Factor >0.95
LED Luminous Flux 4800lm
Luminous Efficacy >90lm/W
LED Manufacturer Honglitronic
LED Type SMD 4014
No. of LEDs 234
Driver Manufacturer Philips
Driver Output Voltage DC 36-42
Total Circuit Power (W) 40+/-2%
Electrical Class 3
Colour Rendering >80 CRI
Lamp Viewing Angle 115°
Dimmable Optional upgrade
Operating Temp. 0 to +45°C
Lifespan 50,000 hours
Fire Rating HB
UGR Rating 22
Diffuser Material Polycarbonate
Housing Material/Frame Colour Aluminium/Silver
Weight 4.0kg
KEY DATA
Power 40W
Luminous Flux 3600lm
Colour Temperature 4500K/5500K
IP Rating IP20
Dimensions 1195x295x10mm
Warranty 5 Years Extended
Part Number 4500K NET-11-03-11
Part Number 5500K NET-11-03-13
1195 10
DRIVER AS STANDARD
295
LED
PA
NEL L
IGH
TS | 4
0W
1200x3
00m
m 4
500K/5
500K
12www.netled.co.uk | 01223 851505
AVERAGE BEAM ANGLE: 115°
RoHSIES Data Files available
TYPICALLY REPLACES
• 2 x 36W T8 fluorescent• 2 x 28W T5 fluorescent
LIGHT DISTRIBUTION CURVE
DIMENSIONS
All units are in mm
LED PANEL LIGHTSEgde-Lit 60W 1200x600mm 4500K/5500K
LED PANEL LIGHTS | EDGE-LIT 60W 1200x600mm 4500K/5500K
TECHNICAL SPECIFICATIONS
Input Voltage 220-240V AC
Power Factor >0.95
LED Luminous Flux 6750lm
Luminous Efficacy >90lm/W
LED Manufacturer Honglitronic
LED Type SMD 4014
No. of LEDs 364
Driver Manufacturer Lifud
Driver Output Voltage DC 36-42
Total Circuit Power (W) 60+/-3%
Electrical Class 3
Colour Rendering >80 CRI
Lamp Viewing Angle 115°
Dimmable Optional upgrade
Operating Temp. -15 to +50°C
Lifespan 50,000 hours
Fire Rating HB
UGR Rating 22
Diffuser Material Polycarbonate
Housing Material/Frame Colour Aluminium/Silver
Weight 6.9kg
KEY DATA
Power 60W
Luminous Flux 5600lm
Colour Temperature 4500K/5500K
IP Rating IP20
Dimensions 1195x595x10mm
Warranty 5 Years Extended
Part Number 4500K NET-11-03-21
Part Number 5500K NET-11-03-23
FEATURES & BENEFITS
• Redesigned Light Guide plate allowing for higher lumen output at 10% lower wattage.
• Mounted driver for improved airflow.• Twist ‘n’ lock driver cable.• DALI (NET-29-43-07) dimming option.• 1-10V (NET-29-43-11) dimming option.• Compatible with 3 Hour Emergency Kit
(NET-19-33-03).• Not suitable for suspension.
1195
595
10
LED
PA
NEL L
IGH
TS | 6
0W
1200x6
00m
m 4
500K/5
500K
13 NET LED Lighting | Our Service, Our People, Your Choice
AVERAGE BEAM ANGLE: 115°
RoHSIES Data Files available
TYPICALLY REPLACES
• 4 x 36W T8 fluorescent• 4 x 28W T5 fluorescent
DRIVER
DIMENSIONS
LIGHT DISTRIBUTION CURVEAll units are in mm
LED PANEL LIGHTSBack-Lit 32W 600x600mm 4500K
LED PANEL LIGHTS | BACK-LIT 32W 600x600mm 4500K
FEATURES & BENEFITS
• Mounted driver for improved airflow.• Twist ‘n’ lock driver cable.• DALI (NET-29-43-01) dimming option.• 1-10V (NET-29-43-03) dimming option.• Compatible with 3 Hour Emergency Kit
(NET-19-33-03).• Not suitable for suspension or surface
mounting.
TECHNICAL SPECIFICATIONS
Input Voltage 200-240V AC
Power Factor >0.95
LED Luminous Flux 3200lm
Luminous Efficacy >90lm/W
LED Manufacturer Honglitronic
LED Type SMD 4014
No. of LEDs 240
Driver Manufacturer Philips
Driver Output Voltage DC 36-42
Total Circuit Power (W) 32+/-5%
Electrical Class 3
Colour Rendering >80 CRI
Lamp Viewing Angle 120°
Dimmable Optional upgrade
Operating Temp. 0 to +45°C
Lifespan 50,000 hours
Fire Rating HB
UGR Rating 22
Diffuser Material Polycarbonate
Housing Material/Frame Colour Aluminium/Silver
Weight 3kg
KEY DATA
Power 32W
Luminous Flux 2800lm
Colour Temperature 4500K
IP Rating IP20
Dimensions 595x595x55mm
Warranty 5 Years Extended
Part Number 4500K NET-11-03-53
DRIVER AS STANDARD
LED
PA
NEL L
IGH
TS | B
ack-Lit 3
2W
600x6
00m
m 4
500K
14www.netled.co.uk | 01223 851505
55595
595
new
AVERAGE BEAM ANGLE: 120°
RoHSIES Data Files available
TYPICALLY REPLACES
• 4 x 18W T8 fluorescent• 4 x 14W T5 fluorescent• 1 x 55W 2G11 fluorescent
LIGHT DISTRIBUTION CURVE
DIMENSIONS
All units are in mm
LED PANEL LIGHTSGrid Luminaire 36W 600x600mm 5500K
LED PANEL LIGHTS | GRID LUMINAIRE 36W 600x600mm 5500K
FEATURES & BENEFITS
• Mounted driver for improved airflow.• Twist ‘n’ lock driver cable.• DALI (NET-29-43-01) dimming option.• 1-10V (NET-29-43-03) dimming option.• Compatible with 3 Hour Emergency Kit
(NET-19-33-03).• Not suitable for suspension.
TECHNICAL SPECIFICATIONS
Input Voltage 220-240V AC
Power Factor >0.95
LED Luminous Flux 3530lm
Luminous Efficacy >90lm/W
LED Manufacturer Honglitronic
LED Type SMD 2835
No. of LEDs 180
Driver Manufacturer Philips
Driver Output Voltage DC 36-40
Total Circuit Power (W) 36+/-5%
Electrical Class 3
Colour Rendering >80 CRI
Lamp Viewing Angle 110°
Dimmable Optional upgrade
Operating Temp. 0 to +45°C
Lifespan 50,000 hours
Fire Rating V-0
UGR Rating 22
Diffuser Material Polycarbonate
Housing Material/Colour Aluminium/White
Weight 2.6kg
KEY DATA
Power 36W
Luminous Flux 2650lm
Colour Temperature 5500K
IP Rating IP20
Dimensions 595x595x13mm
Warranty 5 Years Extended
Part Number NET-11-11-21
595
595
13
DRIVER AS STANDARD
LED
PA
NEL L
IGH
TS | G
rid Lu
min
aire 3
6W
600x6
00m
m 5
500K
15 NET LED Lighting | Our Service, Our People, Your Choice
AVERAGE BEAM ANGLE: 110°
RoHSIES Data Files available
TYPICALLY REPLACES
• 4 x 18W T8 fluorescent• 4 x 14W T5 fluorescent• 1 x 2G11 fluorescent
DIMENSIONS
LIGHT DISTRIBUTION CURVEAll units are in mm
LED PANEL LIGHTSAccessories
LED PANEL LIGHTS | ACCESSORIES
Surface Mount Box for LED Panel
The Surface Mount Box for LED Panels provides a slim option for mounting LED Panels on a surface that has no void behind it. The frame has a depth of 50mm to accommodate the LED Panel driver and optional 3 Hour Emergency Kit.
The frame has a smooth silver finish.
Supplied as an easy-to-assemble kit form, the box comes complete with screws and rawl plugs.
Part Number 600x600mm NET-11-03-39
Part Number 1200x300mm NET-11-03-41
Part Number 1200x600mm NET-11-03-43
Suspension Kit for LED Panel
Wire suspension kits for LED Panels provide various installation options by allowing them to be suspended from higher or angled ceilings with the LED driver and optional 3 Hour Emergency Kit located on top of the LED panel.
The kits are height-adjustable up to a maximum length of 1m, and come complete with screws and rawl plugs.
Suitable for use with 500x500mm and 600x600mm Panel Lights only.
Part Number NET-11-03-31
3 Hour Emergency Kit for LED Panel & Grid Luminaire
All LED Panel Lights are compatible with our 3 Hour Emergency Kits, maintaining the units in emergency situations for no less than 3 hours. Our Emergency Kits are manufactured by Liteplan.
Full specifications can be found on pages 113.
Part Number NET-19-33-03
DALI addressable version NET-19-33-15
Replacement 22W, 32W, 40W and 60W LED Panel Light drivers can be found on page 111.
LED
PA
NEL L
IGH
TS | A
ccesso
ries
16www.netled.co.uk | 01223 851505
RoHSIES Data Files available
LED PANEL LIGHTSDimming accessories
LED PANEL LIGHTS | DIMMING ACCESSORIES
DALI Dimming Driver for 22W LED Panel Light
Power 25W
Input Voltage 180-295V AC
Power Factor >0.97
AC Current 0.17A/230VAC
Output Current 500mA
IP Rating IP20
Dimensions 105x68x23mm
Weight 160g
DALI Standards IEC62386-101, 102, 207
Part Number NET-29-43-05
DALI Dimming Driver for 32W/40W LED Panel Light
Power 40W
Input Voltage 180-295V AC
Power Factor >0.97
AC Current 0.23A/230V AC
Output Current 750mA/900mA
IP Rating IP20
Dimensions 124x82x23mm
Weight 240g
DALI Standards IEC62386-101, 102, 207
Part Number NET-29-43-01
For full LED Lighting Controls specifications, see page 107.
LED
PA
NEL L
IGH
TS | D
imm
ing acce
ssorie
s
17 NET LED Lighting | Our Service, Our People, Your Choice
RoHS
DALI Dimming Driver for 60W LED Panel Light
Power 60W
Input Voltage 180-295V AC
Power Factor >0.97
AC Current 0.32A/230V AC
Output Current 1400mA
IP Rating IP20
Dimensions 124x82x23mm
Weight 240g
DALI Standards IEC62386-101, 102, 207
Part Number NET-29-43-07
LED PANEL LIGHTSDimming accessories
LED PANEL LIGHTS | DIMMING ACCESSORIESLED
PA
NEL L
IGH
TS | D
imm
ing acce
ssorie
s
18www.netled.co.uk | 01223 851505
Dimmer for 1-10V Dimming Driver
Type 4A Push Switch
Colour White
Dimensions 72x72x35mm
Weight 100g
Dimming Standards 1-10V DC Grid Dimmer
Plate Compatibility MK (Logic and Grid Plus)
MEM Grid System
Wandsworth Grid System
Crabtree Grid System
Hamilton Grid System
Part Number NET-31-43-05
by
1-10V Dimming Driver for 22W LED Panel Light
Power 25W
Input Voltage 180-295V AC
Power Factor >0.97
AC Current 0.17A/230VAC
Output Current 500mA
IP Rating IP20
Dimensions 105x68x23mm
Weight 160g
Part Number NET-29-43-09
1-10V Dimming Driver for 32W/40W LED Panel Light
Power 40W
Input Voltage 180-295V AC
Power Factor >0.97
AC Current 0.23A/230V AC
Output Current 750mA/900mA
IP Rating IP20
Dimensions 124x82x23mm
Weight 240g
Part Number NET-29-43-03
1-10V Dimming Driver for 60W LED Panel Light
Power 60W
Input Voltage 180-295V AC
Power Factor >0.97
AC Current 0.32A/230V AC
Output Current 1400mA
IP Rating IP20
Dimensions 124x82x23mm
Weight 240g
Part Number NET-29-43-11
LED PANEL LIGHTSSummary
LED PANEL LIGHTS | SUMMARY
LED
PA
NEL L
IGH
TS | S
um
mary
19 NET LED Lighting | Our Service, Our People, Your Choice
Part Number Description Driver Power Colour Temp. Lumens Dimmable
NET-11-03-05 Edge-Lit LED Panel Light Bi-Colour UGR<19 600x600mm Philips 40W 4500K or 5500K 3600lm Optional
NET-11-03-25 Egde-Lit LED Panel Light 500x500mm Philips 22W 4500K 2000lm Optional
NET-11-03-01 Edge-Lit LED Panel Light 600x600mm Philips 40W 4500K 3600lm Optional
NET-11-03-03 Edge-Lit LED Panel Light 600x600mm Philips 40W 5500K 3600lm Optional
NET-11-03-11 Edge-Lit LED Panel Light 1200x300mm Philips 40W 4500K 3600lm Optional
NET-11-03-13 Edge-Lit LED Panel Light 1200x300mm Philips 40W 5500K 3600lm Optional
NET-11-03-21 Edge-Lit LED Panel Light 1200x600mm Lifud 60W 4500K 5600lm Optional
NET-11-03-23 Edge-Lit LED Panel Light 1200x600mm Lifud 60W 5500K 5600lm Optional
NET-11-03-53 Back-Lit LED Panel Light 600x600mm Philips 32W 4500K 2800lm Optional
NET-11-11-21 LED Grid Luminaire 600x600mm Philips 36W 5500K 2650lm Optional
NET-11-03-39 Surface Mount Box for 600x600mm Panel Light N/A N/A N/A N/A N/A
NET-11-03-41 Surface Mount Box for 1200x300mm Panel Light N/A N/A N/A N/A N/A
NET-11-03-43 Surface Mount Box for 1200x600mm Panel Light N/A N/A N/A N/A N/A
NET-11-03-31 Suspension Kit - 4 Stud N/A N/A N/A N/A N/A
NET-19-33-03 3 Hour Emergency Kit for LED Panel Lights & Grid Luminaire N/A 5W N/A N/A N/A
NET-19-33-15 DALI Addressable 3 Hour Emergency Kit for LED Panels N/A 5W N/A N/A N/A
NET-29-43-05 DALI LED Dimming Driver for 22W LED Panel Light Mean Well 25W N/A N/A Yes
NET-29-43-01 DALI LED Dimming Driver for 32W/40W LED Panel Light Mean Well 40W N/A N/A Yes
NET-29-43-07 DALI LED Dimming Driver for 60W LED Panel Light Mean Well 60W N/A N/A Yes
NET-29-43-09 1-10V Dimming Driver for 22W LED Panel Light Mean Well 25W N/A N/A Yes
NET-29-43-03 1-10V Dimming Driver for 32W/40W LED Panel Light Mean Well 40W N/A N/A Yes
NET-29-43-11 1-10V Dimming Driver for 60W LED Panel Light Mean Well 60W N/A N/A Yes
NET-31-43-05 Dimmer for 1-10V Dimming Drivers N/A N/A N/A N/A N/A
Fish Brothers Group, Swindon
“As our business grows, we have become increasingly conscious of the effect our operations have on the environment.”
- Sean Donovan Group Health & Safety and Quality Manager
Fish Brothers Group, 2014
THE PROJECT
Fish Brothers Group is a family owned new and used car dealership with a number of branches operating in Swindon.
Having already installed a large number of solar panels on the roofs of their dealerships, the company was looking to further reduce its carbon footprint and energy spend by installing LED lighting in and around its premises.
THE SOLUTION
During 2013, LED Tubes and Panel Lights were selected to light the car showrooms and office areas for their light output and ease of installation. Internal drivers and long life-expectancy (50,000 working hours) made the LED solutions reliable as well as energy efficient.
LED Flood Lights were selected for the dealerships’ outdoor lighting. The high lumen output and weather-proof IP65 housing made them perfect for the application and maintenance-free.
LED Floods were also used as low bay fittings within Fish Brothers’ repair garages, providing great reliable light coverage over a wide area.
THE RESULT By incorporating LED Tubes, Panels and Flood Lights into its energy plan Fish Brothers has made savings of around 65% on the costs usually incurred by traditional lighting, and has made a significant reduction to its carbon footprint.
Sean Donovan, Group Health & Safety and Quality Manager for Fish Brothers, said: “As our business grows we have become increasingly conscious of the effect our operations have on the environment.”
“For this reason we were keen to implement energy-saving solutions like LED lighting.”
CASE STUDY
CASE STUDY | FISH BROTHERS GROUP
www.netled.co.uk | 01223 851505 20
CA
SE S
TU
DY
| Fish B
roth
ers G
roup
20
70 %energysaving
50 ,000hourslife
WA
R R A N
TY
·EX
TENDED
LED NCF Luminaires are robust units incorporating advanced chip technology in weather-proof all-polycarbonate IP65 rated housings.
Designed to replace twin non-corrosive fluorescent fittings, the units has been developed to deliver a high light output at a significantly reduced energy cost.
LED NCF Luminaires are most often used in car parks, warehouses, factories and other industrial applications. Units are safe for use in areas where food is stored and prepared as they incorporate no glass and are supplied with stainless steel retaining clips as standard.
The units’ lifespan (upwards of 50,000 working hours) removes the need for regular maintenance, making them products of choice for installation in hard-to-reach areas and spaces that would usually require downtime for repairs.
Manufactured by:
LED
NCF L
UM
INA
IRES
21 NET LED Lighting | Our Service, Our People, Your Choice
LED NCF Luminaires
LED NCF Luminaires are supplied with stainless steel retaining clips as standard. This ensures they are safe for use in kitchens, cold stores and other areas where food is stored and prepared.
Shatterproof IP65 rated all-polycarbonate housing incorporates no glass. This provides a high level of protection when used in any commercial application - including outdoors.
Easy mounting clips are supplied with LED NCF Luminaires as standard so unit’s retain IP65 rating when installed.
A daisy chain wiring system can be used when installing multiple units via available cable glands. Incorporating the cable glands ensures the units do not lose IP65 rating.
Specially calibrated 3 Hour Emergency Kits are available to support LED NCF Luminaires. The emergency kit is mounted inside the housing.Emergency kits are manufactured in the UK.
APPLICATIONS: > Replaces fluorescent tubes and non-corrosive fittings. > Warehouses and factories. > Car parks and sports facilities. > Kitchens and food storage.
KEY FEATURES: > High lumen output. > Philips driver as standard.* > IP65 rated housing. > Easy mounting clips. > 3 Hour Emergency Kits available. > 5 Year Extended Warranty.
PRODUCT FEATURES: > Up to 70% energy savings. > Instant ON at full brightness. > Lasts 3-5 times longer than fluorescent fittings. > No glass - shatterproof polycarbonate housing. > No mercury or lead. > Easy installation. > No flicker or hum. > Maintenance-free. > No UV light emitted. > Useful life expectancy > 50,000 hours.
LED
NCF L
UM
INA
IRES
22www.netled.co.uk | 01223 851505
DRIVER AS STANDARD*
* Excluding NET-11-11-07.
LIGHT DISTRIBUTION CURVE
LED NCF LUMINAIRES22W 600mm (2ft) 5500K
LED NCF LUMINAIRES | 22W 600mm (2ft) 5500K
FEATURES & BENEFITS
• Weather and dust-proof IP65 rated housing.• Stainless steel retaining clips.• Easy-mounting clips.• NOT compatible with 3 Hour Emergency Kit.
TECHNICAL SPECIFICATIONS
Input Voltage 220-240V AC
Power Factor >0.95
LED Luminous Flux 2530lm
Luminous Efficacy >90lm/W
LED Manufacturer Honglitronic
LED Type SMD 2835
No. of LEDs 132
Driver Manufacturer Philips
Driver Output Voltage DC 36-42
Total Circuit Power (W) 22+/-2%
Electrical Class 1
Colour Rendering >80 CRI
Lamp Viewing Angle 120°
Dimmable No
Operating Temp. 0 to +45°C
Lifespan 50,000 hours
Fire Rating V-0
UGR Rating 22
Diffuser Material Polycarbonate
Housing Material/Colour Polycarbonate/Grey
Weight 1.3kg
KEY DATA
Power 22W
Luminous Flux 2100lm
Colour Temperature 5500K
IP Rating IP65
Dimensions 650x130x85mm
Warranty 5 Years Extended
Part Number NET-11-11-01
85
650
130
DRIVER AS STANDARD
LED
NCF L
UM
INA
IRES | 2
2W
600m
m (2
ft) 5500K
23 NET LED Lighting | Our Service, Our People, Your Choice
AVERAGE BEAM ANGLE: 120° RoHSIES Data Files available
TYPICALLY REPLACES
• 2 x 18W T8 fluorescent• 2 x 14W T5 fluorescent
DIMENSIONS
LIGHT DISTRIBUTION CURVEAll units are in mm
LED NCF LUMINAIRES | 40W 1200mm (4ft) 5500K
LED NCF LUMINAIRES40W 1200mm (4ft) 5500K
FEATURES & BENEFITS
• Weather and dust-proof IP65 rated housing.• Stainless steel retaining clips.• Easy-mounting clips.• Compatible with 3 Hour Emergency Kit
(NET-19-33-09).
TECHNICAL SPECIFICATIONS
Input Voltage 220-240V AC
Power Factor >0.95
LED Luminous Flux 3970lm
Luminous Efficacy >90lm/W
LED Manufacturer Honglitronic
LED Type SMD 2835
No. of LEDs 216
Driver Manufacturer Philips
Driver Output Voltage DC 36-42
Total Circuit Power (W) 40+/-2%
Electrical Class 1
Colour Rendering >80 CRI
Lamp Viewing Angle 120°
Dimmable No
Operating Temp. 0 to +45°C
Lifespan 50,000 hours
Fire Rating V-0
UGR Rating 22
Diffuser Material Polycarbonate
Housing Material/Colour Polycarbonate/Grey
Weight 2.4kg
1270
130
85
DRIVER AS STANDARD
LED
NCF L
UM
INA
IRES | 4
0W
1200m
m (4
ft) 5500K
24www.netled.co.uk | 01223 851505
AVERAGE BEAM ANGLE: 120°
KEY DATA
Power 40W
Luminous Flux 3300lm
Colour Temperature 5500K
IP Rating IP65
Dimensions 1270x130x85mm
Warranty 5 Years Extended
Part Number NET-11-11-03
RoHSIES Data Files available
TYPICALLY REPLACES
• 2 x 36W T8 fluorescent• 2 x 28W T5 fluorescent
LIGHT DISTRIBUTION CURVE
DIMENSIONS
All units are in mm
LED NCF LUMINAIRES45W 1500mm (5ft) 5500K
LED NCF LUMINAIRES | 45W 1500mm (5ft) 5500K
FEATURES & BENEFITS
• Robust weather and dust-proof IP65 rated housing.
• Stainless steel retaining clips.• Easy-mounting clips.• Compatible with 3 Hour Emergency Kit
(NET-19-33-09).
TECHNICAL SPECIFICATIONS
Input Voltage 220-240V AC
Power Factor >0.95
LED Luminous Flux 4630lm
Luminous Efficacy >90lm/W
LED Manufacturer Honglitronic
LED Type SMD 2835
No. of LEDs 240
Driver Manufacturer Philips
Driver Output Voltage DC 36-42
Total Circuit Power (W) 45+/-2%
Electrical Class 1
Colour Rendering >80 CRI
Lamp Viewing Angle 120°
Dimmable No
Operating Temp. 0 to +45°C
Lifespan 50,000 hours
Fire Rating V-0
UGR Rating 22
Diffuser Material Polycarbonate
Housing Material/Colour Polycarbonate/Grey
Weight 2.9kg
KEY DATA
Power 45W
Luminous Flux 3850lm
Colour Temperature 5500K
IP Rating IP65
Dimensions 1560x130x85mm
Warranty 5 Years Extended
Part Number NET-11-11-05
1560
130
85
DRIVER AS STANDARD
LED
NCF L
UM
INA
IRES | 4
5W
1500m
m (5
ft) 5500K
25 NET LED Lighting | Our Service, Our People, Your Choice
AVERAGE BEAM ANGLE: 120° RoHSIES Data Files available
TYPICALLY REPLACES
• 2 x 58W T8 fluorescent• 2 x 35W T5 fluorescent
DIMENSIONS
LIGHT DISTRIBUTION CURVEAll units are in mm
LED NCF LUMINAIRES60W 1500mm (5ft) 5500K
LED NCF LUMINAIRES | 60W 1500mm (5ft) 5500K
FEATURES & BENEFITS
• Weather and dust-proof IP65 rated housing.• Stainless steel retaining clips.• Easy-mounting clips.• Compatible with 3 Hour Emergency Kit
(NET-19-33-09).
TECHNICAL SPECIFICATIONS
Input Voltage 220-240V AC
Power Factor >0.95
LED Luminous Flux 6250lm
Luminous Efficacy >90lm/W
LED Manufacturer Honglitronic
LED Type SMD 2835
No. of LEDs 324
Driver Manufacturer Lifud
Driver Output Voltage DC 36-42
Total Circuit Power (W) 60+/-5%
Electrical Class 1
Colour Rendering >80 CRI
Lamp Viewing Angle 120°
Dimmable No
Operating Temp. -15 to +50°C
Lifespan 50,000 hours
Fire Rating V-0
UGR Rating 22
Diffuser Material Polycarbonate
Housing Material/Colour Polycarbonate/Grey
Weight 3.0kg
KEY DATA
Power 60W
Luminous Flux 5200lm
Colour Temperature 5500K
IP Rating IP65
Dimensions 1560x130x85mm
Warranty 5 Years Extended
Part Number NET-11-11-07
1564
130
85
LED
NCF L
UM
INA
IRES | 6
0W
1500m
m (5
ft) 5500K
26www.netled.co.uk | 01223 851505
AVERAGE BEAM ANGLE: 120° RoHSIES Data Files available
TYPICALLY REPLACES
• 2 x 70W T8 fluorescent
DRIVER
LIGHT DISTRIBUTION CURVE
DIMENSIONS
All units are in mm
LED NCF LUMINAIRESAccessories
LED NCF LUMINAIRES | ACCESSORIES
IP65 Cable Gland
For use with All LED NCF Luminaires
Hole diameter 20mm
Weight 10g
Part Number NET-11-16-01
3 Hour Emergency Kit for LED NCF Luminaire
The 4ft and both configurations of the 5ft LED NCF Luminaires are compatible with our 3 Hour Emergency Kit, maintaining the units in emergency situations for not less than 3 hours.
The LED NCF Luminaire 3 Hour Emergency Kit has been specially designed to sit within the unit behind the LED Gear tray. Our Emergency Kits are manufactured by Liteplan.
Full specifications can be found on page 113.
Part Number NET-19-33-09
Part Number Description Driver Power Colour Temp. Lumens Dimmable
NET-11-11-01 LED NCF Luminaire 600mm (2ft) Philips 22W 5500K 2100lm No
NET-11-11-03 LED NCF Luminaire 1200mm (4ft) Philips 40W 5500K 3300lm No
NET-11-11-05 LED NCF Luminaire 1500mm (5ft) Philips 45W 5500K 3850lm No
NET-11-11-07 LED NCF Luminaire 1500mm (5ft) Lifud 60W 5500K 5200lm No
NET-11-16-01 IP65 Cable Gland (for use with LED NCF Luminaires) N/A N/A N/A N/A N/A
NET-19-33-09 3 Hour Emergency Kit for LED NCF Luminaires N/A 5W N/A N/A N/A
LED
NCF L
UM
INA
IRES | A
ccesso
ries
27 NET LED Lighting | Our Service, Our People, Your Choice
Summary
THE PROJECT
Viridor is one of the UK’s leading recycling, renewable energy and waste management companies. Viridor is part of Pennon Group Plc, a FTSE 100 British based plc focused on the water and waste management industries.
As a market leader in recycling and reuse of waste, Viridor partners with local councils, helping them meet waste prevention, recycling and landfill diversion targets. The company also provides the private sector with integrated recycling, waste management and specialist solutions.
Viridor operates from a range of sites, including 20 Materials Recycling Facilities, two Energy from Waste plants and 22 Landfills. It chose LED Panel lights for under floor lighting in the reception at the Viridor Head Office in Taunton, Somerset.
THE SOLUTION
To create a stylish and environmentally friendly lighting solution in the reception of Viridor Head Office, a number of 40W 1200x300mm Panel Lights were installed in the floor and overlaid with protective square glass covers. This produced a state of the art, low energy and zero maintenance, lighting feature, in keeping with the company’s sustainability philosophy.
THE RESULT Viridor was delighted with the aesthetic results of the under floor lighting.
Being installed in the floor, it was important that the lighting should not require any maintenance, as would be needed with fluorescent tubes which also use ballasts requiring maintenance. The LED Panel Lights are maintenance-free and do not use any other control gear such as ballasts, so with their life expectancy of over 50,000 hours, this gave over three times the life when compared with the equivalent fluorescent technology.
In addition to the maintenance savings, had fluorescent lighting been used, two 4ft tubes with ballasts would run at approximately 78W to give the equivalent light output of one of the LED Panel Lights which runs at only 40W, so considerable energy savings are also being made.
Viridor, Taunton
“We were looking for a low energy, zero maintenance, robust but stylish lighting solution for our reception area at the Viridor
Head Office. The LED Panel Lights excelled at all of these characteristics, at a very reasonable price!”
- Karen Shakespeare FletcherExecutive Support Manager
Viridor, 2012
CASE STUDY | VIRIDOR
www.netled.co.uk | 01223 851505
CASE STUDY
28
CA
SE S
TU
DY
| Virid
or
28
65 %energysaving
50 ,000hourslife
WA
R R A N
TY
·EX
TENDED
LED Batten Luminaires are a complete solution designed to replace fluorescent tubes and batten fittings. The units offer performance, reliability and energy savings of up to 65%.
The sleekly designed LED Batten is a completely self-contained luminaire allowing no-fuss installation, and reducing maintenance costs and downtime.
Light is diffused evenly through a shatterproof polycarbonate cover. Advanced LED technology renders units maintenance-free and capable of delivering more than 50,000 hours of quality light.
Suitable for ceiling or wall mounting via rear or side entry and available with an optional 3 Hour Emergency Kit.
LED Batten Luminaires are designed for use in a wide range of applications, including offices and meeting rooms, corridors and stairwells, hotels and supermarkets, hospitals and schools.
Manufactured by:
LED
BATTEN
LU
MIN
AIR
ES
29 NET LED Lighting | Our Service, Our People, Your Choice
LED Batten Luminaires
new
Driver is securely mounted inside the LED Batten Luminaire acting as a heat sink that allows for greater airflow, prolonging the driver’s life.
Detachable LED Gear Tray makes installation easy into ceiling applications. Access to the inside of the unit is simple thanks to slide-to-open mechanism.
Specially designed interlocking power cord ensures connector does not come dislodged during installation.
The SMD 2835 LED chip is an advanced chip technology with superior heat sinking which delivers more effective thermal heat dissipation, extending the life of the chips.
Specially calibrated 3 Hour Emergency Kits are available to support LED Batten Luminaires.The emergency kit is mounted inside the housing.Full specifications can be found on page 113.
APPLICATIONS: > Replaces fluorescent tubes and batten fittings. > Offices, meeting rooms, schools. > Corridors and stairwells. > Hospitals and warehouses.
KEY FEATURES: > High lumen output. > Philips driver as standard. > Rear or side entry. > 3 Hour Emergency Kits available. > 5 Year Extended Warranty.
PRODUCT FEATURES: > Up to 65% energy savings. > Instant ON at full brightness. > Lasts 3-5 times longer than fluorescent tubes. > No glass - shatterproof polycarbonate housing. > No mercury or lead. > Easy installation. > No flicker or hum. > Maintenance-free. > No UV light emitted. > Useful life expectancy > 50,000 hours.
LED
BATTEN
LU
MIN
AIR
ES
30www.netled.co.uk | 01223 851505
DRIVER AS STANDARD
LED BATTEN LUMINAIRES40W 1500mm (5ft) 5500K
LED BATTEN LUMINAIRES | 40W 1500mm (5ft) 5500K
FEATURES & BENEFITS
• Mounted driver for improved airflow.• Detachable LED Tray for easy installation.• Twist ‘n’ lock power cable.• Compatible with 3 Hour Emergency Kit
(NET-19-33-09).
TECHNICAL SPECIFICATIONS
Input Voltage 220-240V AC
Power Factor >0.95
LED Luminous Flux 3500lm
Luminous Efficacy >90lm/W
LED Manufacturer Honglitronic
LED Type SMD 2835
No. of LEDs 240
Driver Manufacturer Philips
Driver Output Voltage DC 36-42
Total Circuit Power (W) 40+/-5%
Electrical Class 1
Colour Rendering >80 CRI
Lamp Viewing Angle 120°
Dimmable No
Operating Temp. 0 to +45°C
Lifespan 50,000 hours
Fire Rating V-0
UGR Rating 22
Diffuser Material Polycarbonate
Housing Material/Colour Aluminium/White
Weight 2.9kg
KEY DATA
Power 40W
Luminous Flux 3000lm
Colour Temperature 5500K
IP Rating IP20
Dimensions 1500x100x92mm
Warranty 5 Years Extended
Part Number NET-11-11-63
1500
90091.9
51.2
100
80.6
Ø 2
2.2
Ø 20.6
270
3.5
DRIVER AS STANDARD
NET LED Lighting | Our Service, Our People, Your Choice
LED
BATTEN
LU
MIN
AIR
ES | 4
0W
1500m
m (5
ft) 5500K
31
new
AVERAGE BEAM ANGLE: 120° RoHSIES Data Files available
TYPICALLY REPLACES
• 2 x 58W T8 fluorescent
DIMENSIONS
LIGHT DISTRIBUTION CURVEAll units are in mm
THE PROJECT
At the heart of The British Library in London, the King’s Library Tower houses books collected by King George III (reigned 1760-1820). It is considered one of the most significant collections of the Enlightenment, containing books printed mainly in Britain, Europe and North America from the mid 15th to the early 19th centuries, with 65,000 volumes of printed books, and 19,000 pamphlets.
The collection’s home is the six-storey King’s Library Tower, designed specifically for the purpose. The books are on view to visitors behind UV-filter glass which, together with the environmental control system, helps maintain appropriate light, temperature and humidity levels.
THE SOLUTION
After a technical evaluation, LED tubes were chosen to light this precious collection. Using the latest solid-state, surface-mount LED technology, 32W 1800mm (6ft) LED T8 Tubes could achieve the precise colour temperature and lighting levels whilst reducing the power consumption by over 60%.
Additional savings are also achieved in running the environmental control system, as the heat output of an LED Tube is significantly less than that of a fluorescent.
THE RESULT Commenting on the installation of the LED Tubes, Patrick Dixon, Head of Building Services at The British Library said: “Unlike fluorescent tubes, the LED Tubes produce no UV light which would be damaging to the books. They also use only a third of the electricity of fluorescents and last over three times longer, providing significant environmental and financial benefits for the Library.”
As well as being widely used for lighting in offices, factories, hospitals and retail outlets, LED Tubes provide an ideal lighting solution for museums and galleries as they do not emit any UV light, and they are available in a range of colour temperatures with reliable colour rendering. They only use a third of the electricity of equivalent fluorescents which also has the benefit of reduced heat output when lighting valuable collections.
British Library, London
“Unlike fluorescent tubes, LED tubes produce no UV light which would be damaging to the books...and are providing significant
environmental and financial benefits for the Library.”
- Patrick Dixon Head of Building Services
British Library, 2009
CASE STUDY | BRITISH LIBRARY
www.netled.co.uk | 01223 851505
CASE STUDY
32
CA
SE S
TU
DY
| British
Library
32
Manufactured by: LED Linear Luminaires are complete LED solutions designed to replace 4ft to 6ft T5 and T8 batten fittings in a broad variety of applications.
Units can be connected through the end or rear knock-outs in the end and rear of the unit. This allows for end-to-end continuous linear arrangements, ideal for use in factories, on production lines, in supermarket and public transport stations.
LED Linear Luminaires offer high lumen output per watt, making them highly energy efficient when compared to fluorescent alternatives.
The LED unit is held together by a simple clip design ensuring a simple installation procedure.
LED
LIN
EA
R L
UM
INA
IRES
65 %energysaving
50 ,000hourslife
WA
R R A N
TY
·EX
TENDED
LED Linear Luminaires
new
NET LED Lighting | Our Service, Our People, Your Choice33
Slim design for a low profile, high output light fitting well-suited for use in a range of applications.
Knock-outs in the end and rear of unit for power entry ensures the unit is suitable for installation in areas with different wiring requirements.
LED unit is held together securely by simple clip design. This allows it to be removed and replaced for simple installation.
Specially designed interlocking power cord ensures connector does not come dislodged during installation.
Flat end allows for seamless ‘infinite’ end-to-end light designs.
APPLICATIONS: > Replaces fluorescent tubes. > Retail, offices, schools, hospitals. > Factories and warehouses. > Supermarkets, train stations and airports.
KEY FEATURES: > High lumen output. > Built-in driver. > Shatterproof polycarbonate housing. > 5 Year Extended Warranty.
PRODUCT FEATURES: > Up to 65% energy savings > Instant ON at full brightness > Lasts 3-5 times longer than fluorescent tubes > No glass - shatterproof polycarbonate > No mercury or lead > Easy installation > No flicker or hum > Maintenance-free > No UV light emitted > Useful life expectancy > 50,000 hours
LED
LIN
EA
R L
UM
INA
IRES
www.netled.co.uk | 01223 851505 34
ø 37.6
TECHNICAL SPECIFICATIONS
Input Voltage 100-240V AC
Power Factor >0.95
LED Luminous Flux 2600lm
Luminous Efficacy >120lm/W
LED Manufacturer Honglitronic
LED Type SMD 2835
No. of LEDs 156
Driver Manufacturer Lifud
Driver Output Voltage DC 36-42
Total Circuit Power (W) 18+/-5%
Electrical Class 1
Colour Rendering >80 CRI
Lamp Viewing Angle 120°
Dimmable No
Operating Temp. -15 to +50°C
Lifespan 50,000 hours
Fire Rating HB
UGR Rating 22
Diffuser Material Polycarbonate
Housing Material/Colour Aluminium/White
Weight 1.0kg
KEY DATA
Power 18W
Luminous Flux 2100lm
Colour Temperature 4500K
IP Rating IP20
Dimensions 1200x50x55mm
Warranty 5 Years Extended
Part Number NET-11-11-71
FEATURES & BENEFITS
• Mounted driver for improved airflow• Superior SMD 2835 LED chips• Knock-outs in the end and rear of unit for
rear or side power entry.
LED LINEAR LUMINAIRES18W 1200mm (4ft) 4500K
LED LINEAR LUMINAIRES | 18W 1200mm (4ft) 4500K
35
LED
LIN
EA
R L
UM
INA
IRES | 18
W 12
00m
m (4
ft) 4500K
35NET LED Lighting | Our Service, Our People, Your Choice
RoHSIES Data Files available
55
50 1200
800
AVERAGE BEAM ANGLE: 120°
TYPICALLY REPLACES
• 1 x 36W T8 fluorescent
DIMENSIONS
LIGHT DISTRIBUTION CURVEAll units are in mm
FEATURES & BENEFITS
• Mounted driver for improved airflow• Superior SMD 2835 LED chips• Knock-outs in the end and rear of unit for
rear or side power entry.
TECHNICAL SPECIFICATIONS
Input Voltage 100-240V AC
Power Factor >0.95
LED Luminous Flux 3150lm
Luminous Efficacy >80lm/W
LED Manufacturer Honglitronic
LED Type SMD 2835
No. of LEDs 182
Driver Manufacturer Lifud
Driver Output Voltage DC 36-42
Total Circuit Power (W) 22+/-5%
Electrical Class 1
Colour Rendering >80 CRI
Lamp Viewing Angle 120°
Dimmable No
Operating Temp. -15 to +50°C
Lifespan 50,000 hours
Fire Rating HB
UGR Rating 22
Diffuser Material Polycarbonate
Housing Material/Colour Aluminium/White
Weight 1.25kg
KEY DATA
Power 22W
Luminous Flux 2500lm
Colour Temperature 4500K
IP Rating IP20
Dimensions 1500x50x55mm
Warranty 5 Years Extended
Part Number NET-11-11-73
LED LINEAR LUMINAIRES22W 1500mm (5ft) 4500K
LED LINEAR LUMINAIRES | 22W 1200mm (4ft) 4500K
36
LED
LIN
EA
R L
UM
INA
IRES | 2
2W
1500m
m (5
ft) 4500K
36www.netled.co.uk | 01223 851505
RoHSIES Data Files available
ø 37.6
55
50 1500
1000
AVERAGE BEAM ANGLE: 120°
TYPICALLY REPLACES
• 1 x 58W T8 fluorescent
LIGHT DISTRIBUTION CURVE
DIMENSIONS
All units are in mm
TECHNICAL SPECIFICATIONS
Input Voltage 100-240V AC
Power Factor >0.95
LED Luminous Flux 4250lm
Luminous Efficacy >80lm/W
LED Manufacturer Honglitronic
LED Type SMD 2835
No. of LEDs 208
Driver Manufacturer Lifud
Driver Output Voltage DC 36-42
Total Circuit Power (W) 30+/-5%
Electrical Class 1
Colour Rendering >80 CRI
Lamp Viewing Angle 120°
Dimmable No
Operating Temp. -15 to +50°C
Lifespan 50,000 hours
Fire Rating HB
UGR Rating 22
Diffuser Material Polycarbonate
Housing Material/Colour Aluminium/White
Weight 1.25kg
KEY DATA
Power 30W
Luminous Flux 3100lm
Colour Temperature 4500K
IP Rating IP20
Dimensions 1500x50x55mm
Warranty 5 Years Extended
Part Number NET-11-11-75
LED LINEAR LUMINAIRES30W 1500mm (5ft) 4500K
LED LINEAR LUMINAIRES | 30W 1500mm (5ft) 4500K
37
LED
LIN
EA
R L
UM
INA
IRES | 3
0W
1500m
m (5
ft) 4500K
37NET LED Lighting | Our Service, Our People, Your Choice
RoHSIES Data Files available
ø 37.6
55
50 1500
1000
AVERAGE BEAM ANGLE: 120°
FEATURES & BENEFITS
• Mounted driver for improved airflow• Superior SMD 2835 LED chips• Knock-outs in the end and rear of unit for
rear or side power entry.
DIMENSIONS
LIGHT DISTRIBUTION CURVEAll units are in mm
TECHNICAL SPECIFICATIONS
Input Voltage 100-240V AC
Power Factor >0.95
LED Luminous Flux 4550lm
Luminous Efficacy >80lm/W
LED Manufacturer Honglitronic
LED Type SMD 2835
No. of LEDs 234
Driver Manufacturer Lifud
Driver Output Voltage DC 36-42
Total Circuit Power (W) 22+/-5%
Electrical Class 1
Colour Rendering >80 CRI
Lamp Viewing Angle 120°
Dimmable No
Operating Temp. -15 to +50°C
Lifespan 50,000 hours
Fire Rating HB
UGR Rating 22
Diffuser Material Polycarbonate
Housing Material/Colour Aluminium/White
Weight 1.45kg
KEY DATA
Power 32W
Luminous Flux 3200lm
Colour Temperature 4500K
IP Rating IP20
Dimensions 1800x50x55mm
Warranty 5 Years Extended
Part Number NET-11-11-77
LED LINEAR LUMINAIRES | 32W 1800mm (6ft) 4500K
LED LINEAR LUMINAIRES32W 1800mm (6ft) 4500K
38
LED
LIN
EA
R L
UM
INA
IRES | 3
2W
1800m
m (6
ft) 4500K
38www.netled.co.uk | 01223 851505
RoHSIES Data Files available
ø 37.6
55
50 1800
1200
AVERAGE BEAM ANGLE: 120°
FEATURES & BENEFITS
• Mounted driver for improved airflow• Superior SMD 2835 LED chips• Knock-outs in the end and rear of unit for
rear or side power entry.
TYPICALLY REPLACES
• 1 x 70W T8 fluorescent
LIGHT DISTRIBUTION CURVE
DIMENSIONS
All units are in mm
39
LED
LIN
EA
R L
UM
INA
IRES | S
um
mary
39
LED LINEAR LUMINAIRESSummary
LED LINEAR LUMINAIRES | SUMMARY
Part Number Description Driver Power Colour Temp. Lumens Dimmable
NET-11-11-71 LED Linear Luminaire 1200mm (4ft) Lifud 18W 5500K 2100lm No
NET-11-11-73 LED Linear Luminaire 1500mm (5ft) Lifud 22W 5500K 2500lm No
NET-11-11-75 LED Linear Luminaire 1500mm (5ft) Lifud 30W 5500K 3100lm No
NET-11-11-77 LED Linear Luminaire 1800mm (6ft) Lifud 32W 5500K 3200lm No
NET LED Lighting | Our Service, Our People, Your Choice
www.netled.co.uk | 01223 851505
THE PROJECT
When Prankash Puntambekar (Ash) decided he would rebuild his Nisa store in Fenstanton, Cambridgeshire, he was adamant that it would be built with the environment in mind.
Together with his contracted electrician, Terry Wager, he contacted NET LED Lighting to discuss what the implications were for substituting energy efficient LED tubes for the conventional fluorescent tube.
THE SOLUTION
From an environmental point of view, the LED Tubes are made in such a way that they contain none of the harmful chemicals found in fluorescent tubes.
More importantly however for Ash was the fact that by using the 127 LED Tubes he required, he would reduce his store’s annual carbon footprint by 10,674 kg CO2, when compared to the equivalent fluorescent tubes.
This means a total life time saving, given the longer life span of the LED Tube of 73,107 kg
CO2.
THE RESULT Ash was also impressed with the comparative financial energy savings, which for a store of his size was in the region of £2,186 per annum, or £14,975 over the tubes’ lifetime.
Furthermore, when the reduced maintenance replacement costs that are involved in changing and disposing of fluorescent tubes are added to the financial energy savings, Ash should see an overall lifetime saving of £23,000, providing a five fold return on his initial investment!
Nisa Local, Cambridgeshire
“The store is recognised as one of the most energy-efficient shops in the area!”
- Terry Wager Electrical Engineer
Nisa Local, 2010
CASE STUDY | NISA LOCAL
www.netled.co.uk | 01223 851505
CASE STUDY
40
CA
SE S
TU
DY
| Nisa Lo
cal
40
65 %energysaving
WA
R R A N
TY
·EX
TENDED
The range of T5 and T8 LED Tubes are designed to be retrofit tubes that increase energy efficiency and reduce the need to replace and recycle fluorescent tubes.
Removing the need for a ballast, incorporating a TUV-approved constant current DC driver with internal thermal fuse, and delivering a lifespan of more than 35,000 working hours, the LED Tube is a highly efficient and robust luminaire.
Available in T5 (1-5ft), T8 (2-6ft) versions, the polycarbonate/aluminium tubes are manufactured with a durable aluminium D-cross section that prevents sagging.
They have rotatable end caps for easy installation. This also makes manipulating beam direction simple by rotating the tube in a fitting.
Integrated thermal fuse protects electrical circuit and LED tube in the event of power surge.
The LED Glass T8 Tubes have fixed end caps and a superior beam angle of 340°.
We stock and supply a wide range of Pre-Wired Luminaires for use with T5 and T8 LED Tubes, along with dedicated 3 Hour Emergency Kits.
Manufactured by:
LED
75 / T
8 T
UBES
41 NET LED Lighting | Our Service, Our People, Your Choice
LED T5 / T8 Tubes
35,000hourslife
Rotatable end caps make installation of the polycarbonate/aluminium LED Tubes quick and simple. Beam angle is easily redirected by rotating the tube in a fitting - perfect for architectural lighting, billboards and retail applications.
A range of pre-wired battens are available for the T5 and T8 LED Tubes. This includes batten fittings with or without diffusers, Cat 2 luminaires, and non-corrosive luminaires.Manufactured in the UK. See page 47.
The SMD 2835 LED chip is an advanced chip technology with superior heat sinking which delivers more effective thermal heat dissipation, extending the life of the chips.
LED Glass T8 Tubes have a superior beam angle, distributing light at an angle of 340°.
Specially calibrated 3 Hour Emergency Kits are available to support LED T5/T8 Tubes.Emergency kits are manufactured in the UK.
APPLICATIONS: > Replaces fluorescent tubes. > Offices, meeting rooms, schools. > Corridors and stairwells. > Hospitals and warehouses.
KEY FEATURES: > High lumen output. > D-cross section backing prevents sagging. > Rotatable end caps. > 3 Hour Emergency Kits available. > 5 Year Extended Warranty.
PRODUCT FEATURES: > Up to 65% energy savings. > Instant ON at full brightness. > Lasts 3-5 times longer than fluorescent tubes. > No glass - shatterproof polycarbonate. > No mercury or lead. > Easy installation. > No flicker or hum. > Maintenance-free. > No UV light emitted. > Useful life expectancy > 35,000 hours.
LED
T5 / T
8 T
UBES
42www.netled.co.uk | 01223 851505
43
LED T5 TUBES6-20W 300mm (1ft) - 1500mm (5ft) 5500K
LED T5 TUBES | 6-20W 300mm (1ft) - 1500mm (5ft) 5500K
1ft (288mm)
Power 6W
Luminous Flux 500lm
Colour Temperature 5500K
IP Rating IP20
Dimensions 302.5x22mm
Warranty 5 Years Extended
Typically replaces 8W T5 fluorescent
Part Number NET-11-01-03
A
22
Part Number Dim A
NET-11-01-03 302.5
NET-11-01-05 563.2
NET-11-01-07 863.2
NET-11-01-09 1163.2
NET-11-01-11 1463.2
TECHNICAL SPECIFICATIONS (ALL T5 MODELS)
Input Voltage 100-240V AC
Power Factor >0.95
Luminous Efficacy >80lm/W
LED Manufacturer Honglitronic
LED Type SMD 2835
Driver Manufacturer Lifud
Driver Output Voltage DC 36-42
Electrical Class 2
Colour Rendering >80 CRI
Lamp Viewing Angle 120°
Dimmable No
Operating Temp. -15 to +50°C
Lifespan 50,000 hours
Fire Rating V-0
UGR Rating 22
End Cap Style G5
Diffuser Material Polycarbonate
Housing Material Aluminium
2ft (549mm)
Power 10W
Luminous Flux 900lm
Colour Temperature 5500K
IP Rating IP20
Dimensions 563.2x22mm
Warranty 5 Years Extended
Typically replaces 14W T5 fluorescent
Part Number NET-11-01-05
4ft (1148mm)
Power 15W
Luminous Flux 1450lm
Colour Temperature 5500K
IP Rating IP20
Dimensions 1163.2x22mm
Warranty 5 Years Extended
Typically replaces 28W T5 fluorescent
Part Number NET-11-01-09
3ft (849mm)
Power 12W
Luminous Flux 1000lm
Colour Temperature 5500K
IP Rating IP20
Dimensions 863.2x22mm
Warranty 5 Years Extended
Typically replaces 21W T5 fluorescent
Part Number NET-11-01-07
5ft (1449mm)
Power 20W
Luminous Flux 1850lm
Colour Temperature 5500K
IP Rating IP20
Dimensions 1463.2x22mm
Warranty 5 Years Extended
Typically replaces 35W T5 fluorescent
Part Number NET-11-01-11
RoHSIES Data Files available
LED
T5 T
UBES | 6
W-2
0W
300m
m - 15
00m
m 5
500K
43 NET LED Lighting | Our Service, Our People, Your Choice
All units are in mm
DIMENSIONS
44
LED T8 TUBES | 10-32W 600mm (2ft) - 1800mm (6ft) 5500K/3000K
LED T8 TUBES10-32W 600mm (2ft) - 1800mm (6ft) 5500K/3000K
TECHNICAL SPECIFICATIONS (ALL T8 MODELS)
Input Voltage 100-240V AC
Power Factor >0.95
Luminous Efficacy >100lm/W
LED Manufacturer Honglitronic
LED Type SMD 2835
Driver Manufacturer Lifud
Driver Output Voltage DC 36-42
Electrical Class 2
Colour Rendering >80 CRI
Lamp Viewing Angle 140°
Dimmable No
Operating Temp. -15 to +50°C
Lifespan 50,000 hours
Fire Rating V-0
UGR Rating 22
End Cap Style G13
Diffuser Material Polycarbonate
Housing Material Aluminium
2ft (600mm)
Power 10W
Luminous Flux 1050lm
Colour Temperature 5500K
IP Rating IP20
Dimensions 604x28mm
Warranty 5 Years Extended
Typically replaces 18W T8 fluorescent
Part Number NET-11-02-01
3ft (900mm)
Power 12W
Luminous Flux 1250lm
Colour Temperature 5500K
IP Rating IP20
Dimensions 908.8x28mm
Warranty 5 Years Extended
Typically replaces 30W T8 fluorescent
Part Number NET-11-02-02
4ft (1200mm)
Power 18W
Luminous Flux 1900lm
Colour Temperature 3000K / 5500K
IP Rating IP20
Dimensions 1213.6x28mm
Warranty 5 Years Extended
Typically replaces 36W T8 fluorescent
Part Number 3000K NET-11-02-11
Part Number 5500K NET-11-02-03
6ft (1800mm)
Power 32W
Luminous Flux 2900lm
Colour Temperature 3000K / 5500K
IP Rating IP20
Dimensions 1778x28mm
Warranty 5 Years Extended
Typically replaces 70W T8 fluorescent
Part Number 3000K NET-11-02-15
Part Number 5500K NET-11-02-05
5ft (1500mm)
Power 22W
Luminous Flux 2200lm
Colour Temperature 3000K / 5500K
IP Rating IP20
Dimensions 1514.2x28mm
Warranty 5 Years Extended
Typically replaces 58W T8 fluorescent
Part Number 3000K NET-11-02-13
Part Number 5500K NET-11-02-04
LED
T8 T
UBES | 10
W-3
2W
600m
m - 18
00m
m 5
500K / 3
000K
44www.netled.co.uk | 01223 851505
A
28
Part Number Dim A
NET-11-02-01 604.0
NET-11-02-02 908.8
NET-11-02-11 / 03 1213.6
NET-11-01-13 / 04 1514.2
NET-11-01-15 / 05 1778.0
RoHSIES Data Files available
All units are in mm
DIMENSIONS
LED T8 TUBESGlass 10-22W 600mm (2ft) - 1500mm (5ft) 5500K
LED T8 TUBES | GLASS 10-22W 600mm (2ft) - 1500mm (5ft) 5500K
TECHNICAL SPECIFICATIONS
Input Voltage 100-240V AC
Power Factor >0.90
Luminous Efficacy >90lm/W
LED Manufacturer Honglitronic
LED Type SMD 2835
Driver Manufacturer Lifud
Driver Output Voltage DC 36-42
Colour Rendering >80 CRI
Lamp Viewing Angle 340°
Dimmable No
Lifespan 35,000 hours
UGR Rating 22
Diffuser Material Glass
Housing Material/Colour Aluminium/Blue End Cap
Operating Temp. -15 to +50°C
Fire Rating V-0
Electrical Class 2
42
26.5
A B C
T8 GLASS LED TUBES
LED Glass T8 Tubes provide an all-glass alternative to aluminium/polycarbonate T8 Tubes.
Units provide a high light output, have internal drivers, fixed end caps, and come with a 3 year warranty.
FEATURES & BENEFITS
• A range of Battens, Cat2 and Non-Corrosive luminaires available (see page 47).
• Superior SMD 2835 LED chips.• Integrated thermal fuse protects electric
circuit and tube in event of power surge.• Compatible with 3 Hour Emergency Kit
(NET-19-33-01).
45
LED T
8 T
UBES | G
lass 10-2
2W
600m
m (2
ft) - 1500m
m (5
ft) 5500K
45 NET LED Lighting | Our Service, Our People, Your Choice
2ft (600mm)
Power 10W
Luminous Flux 900lm
Colour Temperature 5500K
Dimensions 589.9x26mm
Weight 162g
Warranty 3 years
Typically replaces 18W T8 fluorescent
Part Number NET-11-02-21
4ft (1200mm)
Power 18W
Luminous Flux 1700lm
Colour Temperature 5500K
Dimensions 1199.4x26mm
Weight 294g
Warranty 3 years
Typically replaces 36W T8 fluorescent
Part Number NET-11-02-23
5ft (1500mm)
Power 22W
Luminous Flux 2000lm
Colour Temperature 5500K
Dimensions 1500x26mm
Weight 360g
Warranty 3 years
Typically replaces 58W T8 fluorescent
Part Number NET-11-02-24
Part Number Dim A Dim B Dim C
NET-11-02-21 589.9 595.7 604.0
NET-11-02-23 1199.4 1205.3 1213.6
NET-11-012-24 1500.0 1505.9 1514.2
All units are in mm
RoHSIES Data Files available
DIMENSIONS
LED T5 / T8 TUBES3 Hour Emergency Kit
LED T5 / T8 TUBES | 3 HOUR EMERGENCY KIT
3 Hour Emergency Kit for LED Tubes
All T5 and T8 LED Tubes, including the LED T8 Glass Tube, are compatible with the 3 Hour Emergency Kit, maintaining the units in emergency situations for not less than 3 hours. The Emergency Kits are manufactured by Liteplan.
Full specifications can be found on page 115.
Part Number NET-19-33-01
Summary
46
LED
T5 / T
8 T
UBES | 3
Hour E
merge
ncy K
it
46www.netled.co.uk | 01223 851505
Part Number Description Driver Power Colour Temp. Lumens Dimmable
NET-11-01-03 LED T5 Tube 1ft (288mm) Lifud 6W 5500K 500lm No
NET-11-01-05 LED T5 Tube 2ft (549mm) Lifud 10W 5500K 900lm No
NET-11-01-07 LED T5 Tube 3ft (849mm) Lifud 12W 5500K 1000lm No
NET-11-01-09 LED T5 Tube 4ft (1148mm) Lifud 15W 5500K 1450lm No
NET-11-01-11 LED T5 Tube 5ft (1449mm) Lifud 20W 5500K 1850lm No
NET-11-02-01 LED T8 Tube 2ft (600mm) Lifud 10W 5500K 1050lm No
NET-11-02-02 LED T8 Tube 3ft (900mm) Lifud 12W 5500K 1250lm No
NET-11-02-11 LED T8 Tube 4ft (1200mm) Lifud 18W 3000K 1900lm No
NET-11-02-03 LED T8 Tube 4ft (1200mm) Lifud 18W 5500K 1900lm No
NET-11-02-13 LED T8 Tube 5ft (1500mm) Lifud 22W 3000K 2200lm No
NET-11-02-04 LED T8 Tube 5ft (1500mm) Lifud 22W 5500K 2200lm No
NET-11-02-15 LED T8 Tube 6ft (1800mm) Lifud 32W 3000K 2900lm No
NET-11-02-05 LED T8 Tube 6ft (1800mm) Lifud 32W 5500K 2900lm No
NET-11-02-21 LED Glass T8 Tube 2ft (600mm) Lifud 10W 5500K 900lm No
NET-11-02-23 LED Glass T8 Tube 4ft (1200mm) Lifud 18W 5500K 1700lm No
NET-11-02-24 LED Glass T8 Tube 5ft (1500mm) Lifud 22W 5500K 2000lm No
NET-19-33-01 3 Hour Emergency Kit for LED T5 & T8 Tubes N/A 5W N/A N/A N/A
Neutral
LED Tube
Live 100-240 V AC/DC
LED Starter
RETROFIT INSTALLATION WIRING DIAGRAM FOR ALL LED TUBES
Manufactured by: We supply a range of Pre-Wired Luminaires for use with the T5 and T8 LED Tubes, making them a convenient plug-and-play solution.
We offer Pre-Wired Luminaires products to suit different applications. Battens are compatible with the T5 and T8 Tubes, and can be supplied with or without diffusers. They are well-suited for use in offices, corridors, receptions, schools and hospitals.
Cat 2-style fittings are a popular option for retail and office applications.
LED Tube compatible non-corrosive fittings are manufactured from robust polycarbonate rated IP65. They are weather and dust-proof, and are safe for use in humid and/or outdoor environments. The retaining clips can be replaced by stainless steel alternatives (sold separately). This make the units safe for use in places where food is prepared and stored.
· Y E A R ·
WAR
RANTY3
47
LU
MIN
AIR
ES P
RE-W
IRED
FO
R L
ED
47 NET LED Lighting | Our Service, Our People, Your Choice
Luminaires Pre-Wired for LED
Luminaires Pre-Wired for LED are compatible with the T5 and T8 LED Tube products. No additional set-up required - installation is plug-and-play.
T5 and T8 single and twin battens are available with or without prismatic polycarbonate diffusers. Diffusers are sold separately.
Cat 2 fittings incorporate robust powder-coated steel bodies with aluminium diffusers. A popular choice for offices and retail.Available in twin, tri, and quad sizes.
Non-corrosive fittings are IP65-rated. These units are safe for use in humid or outdoor environments. Most often used in manufacturing, storage, and car park applications.
Pre-wired non-corrosive luminaires can be supplied with optional stainless steel retaining clips. This makes them safe for use in environments where food is stored and prepared.
APPLICATIONS: > Offices and retail applications. > Corridors and stairwells. > Schools, hospitals and receptions. > Manufacturing and storage facilities.
KEY FEATURES: > Plug-and-play solution for use with T5 and T8 tubes. > Quality UK-based manufacturing. > Compatible with 3 Hour Emergency Kits. > Conforms to BS EN-60598. > 3 year warranty.
PRODUCT FEATURES (WITH LED TUBES): > Up to 65% energy savings. > Instant ON at full brightness. > Lasts 3-5 times longer than fluorescent tubes. > No glass - shatterproof polycarbonate. > No mercury or lead. > Easy installation. > No flicker or hum. > Maintenance-free.
48
LU
MIN
AIR
ES P
RE-W
IRED
FO
R L
ED
48www.netled.co.uk | 01223 851505
LUMINAIRES PRE-WIRED FOR LEDT5 / T8 Battens and Diffusers
LUMINAIRES PRE-WIRED FOR LED | T5 / T8 BATTENS AND DIFFUSERS
T5 SINGLE/TWIN BATTEN
Length 1449mm/1449mm
Width 59mm/105mm
Depth 93mm/93mm
Weight 1.5kg/2.0kg
Warranty 3 years
Part Number Single NET-27-13-01
Part Number Twin NET-27-13-03
T8 SINGLE BATTEN
Length 1221mm/1521mm/1784mm
Width 59mm/59mm/59mm
Depth 93mm/93mm/93mm
Weight 1.5kg/1.9kg/2.3kg
Warranty 3 years
Part Number 1200mm NET-27-13-05
Part Number 1500mm NET-27-13-09
Part Number 1800mm NET-27-13-13
T8 TWIN BATTEN
Length 1221mm/1521mm/1784mm
Width 105mm/105mm/105mm
Depth 91mm/91mm/91mm
Weight 2.0kg/2.1kg/2.4kg
Warranty 3 years
Part Number 1200mm NET-27-13-17
Part Number 1500mm NET-27-13-21
Part Number 1800mm NET-27-13-25
DIFFUSERS FOR T8 BATTENS
Warranty 3 years
Part Number 1200mm Sgl NET-27-13-07
Part Number 1500mm Sgl NET-27-13-11
Part Number 1800mm Sgl NET-27-13-15
Part Number 1200mm Twin NET-27-13-27
Part Number 1500mm Twin NET-27-13-19
Part Number 1800mm Twin NET-27-13-23
49
LU
MIN
AIR
ES P
RE-W
IRED FO
R L
ED | T
5 / T
8 B
attens and D
iffusers
49 NET LED Lighting | Our Service, Our People, Your Choice
LUMINAIRES PRE-WIRED FOR LEDT8 Cat 2 Luminaires
LUMINAIRES PRE-WIRED FOR LED | T8 CAT 2 LUMINAIRES
T8 TWIN CAT2 LUMINAIRE
Length 1256mm/1556mm
Width 254mm/254mm
Depth 74mm/74mm
Weight 2.0kg/2.1kg
Installation Surface mount
Warranty 3 years
Part Number 1200mm NET-27-14-01
Part Number 1500mm NET-27-14-03
T8 TRI CAT2 LUMINAIRE
Length 646mm
Width 472mm
Depth 74mm
Weight 4.0kg
Installation Recessed
Warranty 3 years
Part Number NET-27-14-05
T8 QUAD CAT2 LUMINAIRE
Length 646mm
Width 472mm
Depth 74mm
Weight 4.0kg
Installation Recessed
Warranty 3 years
Part Number NET-27-14-07
50
LU
MIN
AIR
ES P
RE-W
IRED
FO
R L
ED
| T8 C
at 2 Lu
min
aires
50www.netled.co.uk | 01223 851505
LUMINAIRES PRE-WIRED FOR LEDT5/T8 Non-Corrosive Luminaires
LUMINAIRES PRE-WIRED FOR LED | T5 / T8 NON-CORROSIVE LUMINAIRES
T5 IP65 LUMINAIRE
Length 1577mm/1577mm
Width 90mm/116mm
Depth 95mm/99mm
Weight 3.8kg/5.8kg
Warranty 3 years
Part Number Single NET-27-15-15
Part Number Twin NET-27-15-17
T8 IP65 SINGLE LUMINAIRE
Length 1221mm/1521mm/1784mm
Width 59mm/59mm/59mm
Depth 93mm/93mm/93mm
Weight 1.5kg/1.9kg/2.3kg
Warranty 3 years
Part Number 1200mm NET-27-15-01
Part Number 1500mm NET-27-15-03
Part Number 1800mm NET-27-15-05
T8 IP65 TWIN LUMINAIRE
Length 1221mm/1521mm/1784mm
Width 105mm/105mm/105mm
Depth 91mm/91mm/91mm
Weight 2.0kg/2.1kg/2.4kg
Warranty 3 years
Part Number 1200mm NET-27-15-07
Part Number 1500mm NET-27-15-09
Part Number 1800mm NET-27-15-11
STAINLESS STEEL CLIPS
No. required for 1200mm 8
No. required for 1500mm 10
No. required for 1800mm 12
Warranty 3 years
Part Number x 1 NET-27-15-13
51
LU
MIN
AIR
ES P
RE-W
IRED FO
R L
ED | T
5 / T
8 N
CF Lum
inaires
51 NET LED Lighting | Our Service, Our People, Your Choice
LUMINAIRES PRE-WIRED FOR LEDT8 No Gear NCF Luminaire with stainless steel clips as standard
LUMINAIRES PRE-WIRED FOR LED | T8 NO GEAR NCF LUMINAIRE
T8 NO GEAR NCF LUMINAIRE
Length 1500m
Width 130mm
Depth 84mm
Weight 2.3kg
Diffuser Material Polycarbonate
Housing Material Polycarbonate
Retaining Clips Stainless steel
Operating Temp. -15 to +50 C
Fire Rating V-0
Manufacturer Toppo
Part Number NET-11-15-09
RoHS
52
LU
MIN
AIR
ES P
RE-W
IRED
FO
R L
ED
| T8 N
o G
ear N
CF Lu
min
aire
52www.netled.co.uk | 01223 851505
Part Number Description Driver Power Colour Temp. Lumens Dimmable
NET-27-13-01 T5 Single Batten 1449mm (5ft) N/A N/A N/A N/A N/A
NET-27-13-03 T5 Twin Batten 1499mm (5ft) N/A N/A N/A N/A N/A
NET-27-13-05 T8 Single Batten 1200mm (4ft) N/A N/A N/A N/A N/A
NET-27-13-09 T8 Single Batten 1500mm (5ft) N/A N/A N/A N/A N/A
NET-27-13-13 T8 Single Batten 1800mm (6ft) N/A N/A N/A N/A N/A
NET-27-13-17 T8 Twin Batten 1200mm (4ft) N/A N/A N/A N/A N/A
NET-27-13-21 T8 Twin Batten 1500mm (5ft) N/A N/A N/A N/A N/A
NET-27-13-25 T8 Twin Batten 1800mm (6ft) N/A N/A N/A N/A N/A
NET-27-13-07 T8 Single Batten Diffuser 1200mm (4ft) N/A N/A N/A N/A N/A
NET-27-13-11 T8 Single Batten Diffuser 1500mm (5ft) N/A N/A N/A N/A N/A
NET-27-13-15 T8 Single Batten Diffuser 1800mm (6ft) N/A N/A N/A N/A N/A
NET-27-13-27 T8 Twin Batten Diffuser 1200mm (4ft) N/A N/A N/A N/A N/A
NET-27-13-19 T8 Twin Batten Diffuser 1500mm (5ft) N/A N/A N/A N/A N/A
NET-27-13-23 T8 Twin Batten Diffuser 1800mm (6ft) N/A N/A N/A N/A N/A
N/A
NET-27-14-01 T8 Twin Cat 2 1200mm (4ft) N/A N/A N/A N/A
NET-27-14-03 T8 Twin Cat 2 1500mm (5ft) N/A N/A N/A N/A N/A
NET-27-14-05 T8 Tri Cat 2 600mm (2ft) N/A N/A N/A N/A N/A
NET-27-14-07 T8 Quad Cat 2 600mm (2ft) N/A N/A N/A N/A N/A
N/A
NET-27-15-15 T5 Single NCF 1449mm (5ft) N/A N/A N/A N/A N/A
NET-27-15-17 T5 Twin NCF 1499mm (5ft) N/A N/A N/A N/A N/A
NET-27-15-01 T8 Single NCF 1200mm (4ft) N/A N/A N/A N/A N/A
NET-27-15-03 T8 Single NCF 1500mm (5ft) N/A N/A N/A N/A N/A
NET-27-15-05 T8 Single NCF 1800mm (6ft) N/A N/A N/A N/A N/A
NET-27-15-07 T8 Twin NCF 1200mm (4ft) N/A N/A N/A N/A
NET-27-15-09 T8 Twin NCF 1500mm (5ft) N/A N/A N/A N/A N/A
NET-27-15-11 T8 Twin NCF 1800mm (6ft) N/A N/A N/A N/A N/A
NET-27-15-13 Stainless Steel Clips N/A N/A N/A N/A N/A
NET-11-15-09 T8 No Gear NCF Luminaire 1500mm (5ft) N/A N/A N/A N/A N/A
Summary
NET LED Lighting | Our Service, Our People, Your Choice
60 %energysaving
50 ,000hourslife
WA
R R A N
TY
·EX
TENDED
The LED Downlight is a low energy replacement for CFL and PLL fittings. Incorporating a low profile design and a built-in driver, units come with adjustable steel retaining clips as standard, and a shatterproof polycarbonate diffuser.
The Downlight’s lightweight polycarbonate cover is frosted and shatterproof, diffusing white light at a beam angle of 110°.
LED Downlights are perfect for use in a wide range of applications, including retail and office space, hotels, conference rooms, kitchens, bathrooms and corridors.
A specially designed twist ‘n’ lock power cord enables secure and quick installation of dedicated 3 Hour Emergency Kits supplied by NET LED.
Manufactured by:
53
LED
DO
WN
LIG
HTS
53
LED Downlights
new
The LED Downlight has a shatterproof polycarbonate diffuser and incorporates no glass. In addition, no mercury or lead is used in any part of the unit, making it safe for use in catering and refrigeration applications.
Pre-attached stainless steel retaining clips ensure installation is quick, simple and safe. The LED Downlight is held in a ceiling tile securely while retaining a low profile.
Specially designed interlocking power cord ensures connector does not come dislodged during installation.
The SMD 2835 LED chip is an advanced chip technology with superior heat sinking which delivers more effective thermal heat dissipation, extending the life of the chips.
Specially calibrated 3 Hour Emergency Kits are available to support LED Downlights.Emergency kits are manufactured in the UK.
APPLICATIONS: > Replaces CFL/PLL. > Retail and offices. > Stairwells and corridors. > Kitchens and bathrooms.
KEY FEATURES: > High lumen output. > Shatterproof polycarbonate diffuser. > Stainless steel retaining clips for secure installation. > 3 Hour Emergency Kits available. > 5 Year Extended Warranty.
PRODUCT FEATURES: > Up to 60% energy savings. > Instant ON at full brightness. > Lasts 3-5 times longer than CFL/PLL equivalents. > No glass - shatterproof polycarbonate diffuser. > No mercury or lead. > Easy installation. > No flicker or hum. > Maintenance-free. > No UV light emitted. > Useful life expectancy > 50,000 hours.
54
LED
DO
WN
LIG
HTS
54www.netled.co.uk | 01223 851505
NET LED Lighting | Our Service, Our People, Your Choice
LED DOWNLIGHTS8W 120-125mm cut-out (4”) 4500K
LED DOWNLIGHTS | 8W 120-125mm CUT-OUT (4”) 4500K
FEATURES & BENEFITS
• Shatterproof polycarbonate diffuser.• Stainless steel retaining clips for easy and
secure installation.• 3 Hour Emergency Kits (NET-19-33-03)
available.
TECHNICAL SPECIFICATIONS
Input Voltage 100-240V AC
Power Factor >0.90
LED Luminous Flux 950lm
Luminous Efficacy >90lm/W
LED Manufacturer Honglitronic
LED Type SMD 2835
No. of LEDs 48
Driver Manufacturer Lifud
Driver Output Voltage DC 36-42
Total Circuit Power (W) 8+/-1%
Electrical Class 1
Colour Rendering >80 CRI
Lamp Viewing Angle 110°
Dimmable No
Operating Temp. -15 to +50°C
Lifespan 50,000 hours
Fire Rating V-0
UGR Rating 22
Diffuser Material Polycarbonate
Housing Material/Colour Aluminium/White
Weight 0.5kg
KEY DATA
Power 8W
Luminous Flux 750lm
Colour Temperature 4500K
IP Rating IP20
Dimensions 140x73.5mm
Cut-out size 120-125mm
Warranty 5 Years Extended
Part Number NET-11-05-13
104
140
123
65.8
73.5
47.5
RoHSIES Data Files available
55
LED
DO
WN
LIG
HTS | 8
W 12
0-12
5m
m cu
t-out (4
”) 4500K
55
AVERAGE BEAM ANGLE: 110°
TYPICALLY REPLACES
• 1 x PAR30 spot
DIMENSIONS
LIGHT DISTRIBUTION CURVEAll units are in mm
LED DOWNLIGHTS18W 170-175mm cut-out (6”) 4500K
LED DOWNLIGHTS | 18W 170-175mm CUT-OUT (6”) 4500K
FEATURES & BENEFITS
• Shatterproof polycarbonate diffuser.• Stainless steel retaining clips for easy and
secure installation.• 3 Hour Emergency Kits (NET-19-33-03)
available.
TECHNICAL SPECIFICATIONS
Input Voltage 100-240V AC
Power Factor >0.95
LED Luminous Flux 1950lm
Luminous Efficacy >90lm/W
LED Manufacturer Honglitronic
LED Type SMD 2835
No. of LEDs 84
Driver Manufacturer Lifud
Driver Output Voltage DC 36-42
Total Circuit Power (W) 18+/-2%
Electrical Class 1
Colour Rendering >80 CRI
Lamp Viewing Angle 110°
Dimmable No
Operating Temp. -15 to +50°C
Lifespan 50,000 hours
Fire Rating V-0
UGR Rating 22
Diffuser Material Polycarbonate
Housing Material/Colour Aluminium/White
Weight 0.75kg
KEY DATA
Power 18W
Luminous Flux 1550lm
Colour Temperature 4500K
IP Rating IP20
Dimensions 190x80mm
Cut-out size 170-175mm
Warranty 5 Years Extended
Part Number NET-11-05-09
145
190
171
86
80
RoHSIES Data Files available
56
LED
DO
WN
LIG
HTS | 18
W 17
0-17
5m
m cu
t-out (6
”) 4500K
56
AVERAGE BEAM ANGLE: 110°
www.netled.co.uk | 01223 851505
TYPICALLY REPLACES
• 2 x 18W CFL
LIGHT DISTRIBUTION CURVE
DIMENSIONS
All units are in mm
NET LED Lighting | Our Service, Our People, Your Choice
LED DOWNLIGHTS22W 200-205mm cut-out (8”) 4500K
LED DOWNLIGHTS | 22W 200-205mm CUT-OUT (8”) 4500K
TECHNICAL SPECIFICATIONS
Input Voltage 100-240V AC
Power Factor >0.95
LED Luminous Flux 2300lm
Luminous Efficacy >90lm/W
LED Manufacturer Honglitronic
LED Type SMD 2835
No. of LEDs 108
Driver Manufacturer Lifud
Driver Output Voltage DC 36-42
Total Circuit Power (W) 22+/-2%
Electrical Class 1
Colour Rendering >80 CRI
Lamp Viewing Angle 110°
Dimmable Optional upgrade
Operating Temp. -15 to +50°C
Lifespan 50,000 hours
Fire Rating V-0
UGR Rating 22
Diffuser Material Polycarbonate
Housing Material/Colour Aluminium/White
Weight 1.0kg
KEY DATA
Power 22W
Luminous Flux 1850lm
Colour Temperature 4500K
IP Rating IP20
Dimensions 230x86mm
Cut-out size 200-205mm
Warranty 5 Years Extended
Part Number NET-11-05-11
FEATURES & BENEFITS
• Shatterproof polycarbonate diffuser.• Stainless steel retaining clips for easy and
secure installation.• 3 Hour Emergency Kits (NET-19-33-03)
available.• DALI (NET-29-43-05) dimming.• 1-10V (NET-29-43-09) dimming.
174
230
200
86
86
RoHSIES Data Files available
DIMMIN
G OPTIO
N
57
LED
DO
WN
LIG
HTS | 18
W 2
00-2
05m
m cu
t-out (8
”) 4500K
57
new
AVERAGE BEAM ANGLE: 110°
TYPICALLY REPLACES
• 2 x 26W CFL
DIMENSIONS
LIGHT DISTRIBUTION CURVEAll units are in mm
LED DOWNLIGHTSEmergency Kit and Dimming
LED DOWNLIGHTS | EMERGENCY KIT AND DIMMING
3 Hour Emergency Kit for LED Downlight
All three versions of our LED Downlights are compatible with our 3 Hour Emergency Kits, maintaining the units in emergency situations for not less than 3 hours. Emergency Kits are manufactured in the United Kingdom by Liteplan.
Full specifications can be found on page 113.
Part Number NET-19-33-03
DALI addressable version NET-19-33-15
1-10V Dimmer for 1-10V Dimming Driver
Type 4A Push Switch
Colour White
Dimensions 72x72x35mm
Weight 100g
Dimming Standards 1-10V DC Grid Dimmer
Plate Compatibility MK (Logic and Grid Plus)
MEM Grid System
Wandsworth Grid System
Crabtree Grid System
Hamilton Grid System
Part Number NET-31-43-05For full LED Lighting Controls specifications, features and benefits see page 107.
58
LED
DO
WN
LIG
HTS | E
merge
ncy K
it and D
imm
ing acce
ssorie
s
58www.netled.co.uk | 01223 851505
by
DALI Dimming Driver for 22W LED Downlight
Power 25W
Input Voltage 180-295V AC
Power Factor >0.97
AC Current 0.17A/230VAC
Output Current 500mA
IP Rating IP20
Dimensions 105x68x23mm
Weight 160g
DALI Standards IEC62386-101, 102, 207
Part Number NET-29-43-05
1-10V Dimming Driver for 22W LED Downlight
Power 25W
Input Voltage 180-295V AC
Power Factor >0.97
AC Current 0.17A/230VAC
Output Current 500mA
IP Rating IP20
Dimensions 105x68x23mm
Weight 160g
Part Number NET-29-43-09
NET LED Lighting | Our Service, Our People, Your Choice
LED DOWNLIGHTS | SUMMARY
LED DOWNLIGHTSSummary
POINT-OF-SALE PACKAGING
LED Downlights are supplied in full colour point-of-sale packaging.
LED Downlights are also available mounted in point of sale ceiling tiles with a hanging info panel for your showroom or counter. Ask your Regional Sales Manager about these.
59
LED
DO
WN
LIG
HTS | S
um
mary
59
Part Number Description Driver Power Colour Temp. Lumens Dimmable
NET-11-05-13 LED Downlight 120-125mm cut-out (4”) Lifud 8W 4500K 750lm No
NET-11-05-09 LED Downlight 170-175mm cut-out (6”) Lifud 18W 4500K 1550lm No
NET-11-05-11 LED Downlight 200-205mm cut-out (8”) Lifud 22W 4500K 1850lm Optional
NET-19-33-03 3 Hour Emergency Kit for LED Downlight N/A N/A N/A N/A N/A
NET-19-33-15 DALI Addressable 3 Hour Emergency Kit for Downlights N/A 5W N/A N/A N/A
NET-29-43-05 DALI Dimming Driver for 22W LED Downlight Mean Well 25W N/A N/A Yes
NET-29-43-09 1-10V Dimming Driver for 22W LED Downlight Mean Well 25W N/A N/A Yes
NET-31-43-05 1-10V Dimmer for 1-10V Dimming Driver N/A N/A N/A N/A N/A
www.netled.co.uk | 01223 851505
CASE STUDY | NEWTON ABBOT RECREATIONAL TRUST
THE PROJECT
The Newton Abbot Recreational Trust operates out of five squash courts and five (four outdoor, one indoor) tennis courts. These play host to tournaments, competitions and a full calendar of friendly games, so quality, reliable lighting is essential.
The club had been replacing fluorescent tubes for more than 20 years, and costs were mounting. These tubes would reportedly often blow-out, and the fluorescent ballasts would fail, forcing the courts to close down for periods while they were replaced. Reaching the courts’ high ceilings meant this downtime could be a significant and frustrating problem for the club’s members - both financially and logistically.
THE SOLUTION
LED NCF Luminaire products were specified for the job. Resembling a traditional batten fitting, the NCF Luminaire incorporates rows of SMD LEDs mounted on a plate within a robust diffuser. A cool white 5500K colour temperature and colour rendering index greater than 80 ensures lighting is crisp and bright in appearance, and surroundings are rendered in true-to-life colours.
With a lifetime expectancy upwards of 50,000 hours and IP65-rated housing, the burden of maintenance and downtime to replace fluorescent tubes has been eliminated.
The all-polycarbonate housing is completely shatterproof, making it safe for use around volatile sports equipment. It is also rendered dust and moisture-proof by the completely sealed IP65-rated enclosure.
THE RESULT
With LED NCF Luminaires, Newton Abbot Squash and Tennis Club is expected to save 55% on their energy spend. Maintenance needs have also diminished, as well as the associated costs, due to the fixtures’ 50,000 hour lifespans.
“The light quality is crisp and great to play under,” said James Cooper, member of Newton Abbot Squash and Tennis Club management.
“The instant on/off functionality is useful, and the increased reliability means we don’t have to frequently replace our lighting and won’t for years to come.”
Newton Abbot Recreational Trust, Newton Abbot
“The light quality is crisp and great to play under. The increased reliability means we won’t have to replace our lighting for years
to come.”
- James CooperTrust Member
Newton Abbot Recreational Trust, 2015
BEFORE: Fluorescent AFTER: LED L: LED, R: Fluorescent
www.netled.co.uk | 01223 851505
CASE STUDY
60
CA
SE S
TU
DY
| New
ton A
bbot R
ecre
ational Tru
st
60
NET LED Lighting | Our Service, Our People, Your Choice
35,000hourslife
Emergency lighting is a requirement for every commercial lighting installation.
Liteplan LED emergency solutions are designed to guide visitors and customers to the nearest emergency exits, and highlight potential hazards on route.
The dedicated LED Emergency Lights provide support in three area types, including:
Specific Locations - where particular locations and hazards need emergency illumination (spot).
Escape Routes - focused light distribution to ensure optimum emergency lighting to illuminate escape routes (narrow).
Open Areas - for areas in which no escape routes are defined (wide).
Manufactured by:
· Y E A R ·
WAR
RANTY3
61
LED
EM
ERG
EN
CY
LIG
HTS
61
LED Emergency Lights
Bespoke lenses designed to control the distribution of light to maximise effective illumination for specific area types.
Non-maintained units that are discreet until needed in emergency situations.
Maintained green LED behind the lens indicates the operational status of the unit.
Instant ON at full brightness to ensure the specified area is fully illuminated and evacuation can begin immediately.
Battery supply is designed to fit through lamp cut-out, so no rear access is required.
APPLICATIONS: > Retail and offices. > Corridors and stairwells. > Hospitals and schools. > Factories and industrial applications.
KEY FEATURES: > Bespoke lenses for a range of applications. > High intensity white LEDs. > Manufactured from flame-retardant ABS. > Maintained green LED indicates status of the unit. > 3 year warranty.
PRODUCT FEATURES: > Instant ON at full brightness. > No mercury or lead. > Easy installation. > No flicker or hum. > Maintenance-free. > No UV light emitted. > Useful life expectancy > 35,000 hours.
62
LED
EM
ERG
EN
CY
LIG
HTS
62www.netled.co.uk | 01223 851505
NET LED Lighting | Our Service, Our People, Your Choice
LED EMERGENCY LIGHTSSpecific Locations 3W 6000K
LED EMERGENCY LIGHTS | SPECIFIC LOCATIONS 3W 6000K
40
5300
FEATURES & BENEFITS
• Specially designed lens to highlight specific locations in emergency situations.
• Discreet non-maintained unit.• Maintained green LED indicates operational
status of unit.• Battery supply designed to fit through lamp
cut-out so no rear access required.• Instant ON at full brightness.
TECHNICAL SPECIFICATIONS
Input Voltage 230V +/0 10%
Power Rating 500mA
Battery Hi Temp Rechargeable NiCD
Recharge Period 24H
LED Type Edison EDEW Series
Colour Rendering >80 CRI
Operating Temp. -15 to +50°C
Lamp Viewing Angle 110°
Lifespan 35,000 hours
Cut Out ø 43mm
Mounting Recessed
Weight 57g
KEY DATA
Power 3W
Luminous Flux 155lm
Colour Temperature 6000K
IP Rating IP30
Dimensions ø 50x45mm
Warranty 3 years
Part Number NET-19-08-01
RoHSIES Data Files available
63
LED
EM
ERG
EN
CY
LIG
HTS | S
pecifi
c Locatio
ns 3
W 6
000K
63
AVERAGE BEAM ANGLE: 110°
DIMENSIONS
LIGHT DISTRIBUTION CURVEAll units are in mm
LED EMERGENCY LIGHTSEscape Routes 3W 6000K
LED EMERGENCY LIGHTS | ESCAPE ROUTES 3W 6000K
RoHSIES Data Files available
TECHNICAL SPECIFICATIONS
Input Voltage 230V +/0 10%
Power Rating 500mA
Battery Hi Temp Rechargeable NiCD
Recharge Period 24H
LED Type Edison EDEW Series
Colour Rendering >80 CRI
Operating Temp. -15 to +50°C
Lamp Viewing Angle 135°x50°
Lifespan 35,000 hours
Cut Out ø 43mm
Mounting Recessed
Weight 61g
KEY DATA
Power 3W
Luminous Flux 155lm
Colour Temperature 6000K
IP Rating IP30
Dimensions ø 50x51mm
Warranty 3 years
Part Number NET-19-08-03
FEATURES & BENEFITS
• Specially designed lens to highlight escape routes in emergency situations.
• Discreet non-maintained unit.• Maintained green LED indicates operational
status of unit.• Battery supply designed to fit through lamp
cut-out so no rear access required.• Instant ON at full brightness.
40
11300
64
LED
EM
ERG
EN
CY
LIG
HTS | E
scape R
oute
s 3W
6000K
64
AVERAGE BEAM ANGLE: 135° x 50°
www.netled.co.uk | 01223 851505
LIGHT DISTRIBUTION CURVE
DIMENSIONS
All units are in mm
NET LED Lighting | Our Service, Our People, Your Choice
LED EMERGENCY LIGHTSOpen Areas 3W 6000K
LED EMERGENCY LIGHTS | OPEN AREAS 3W 6000K
TECHNICAL SPECIFICATIONS
Input Voltage 230V +/0 10%
Power Rating 500mA
Battery Hi Temp Rechargeable NiCD
Recharge Period 24H
LED Type Edison EDEW Series
Colour Rendering >80 CRI
Operating Temp. -15 to +50°C
Lamp Viewing Angle 110°
Lifespan 35,000 hours
Cut Out ø 43mm
Mounting Recessed
Weight 58g
KEY DATA
Power 3W
Luminous Flux 155lm
Colour Temperature 6000K
IP Rating IP30
Dimensions ø 50x45mm
Warranty 3 years
Part Number NET-19-08-05
FEATURES & BENEFITS
• Specially designed lens for illuminating open areas in emergency situations.
• Discreet non-maintained unit.• Maintained green LED indicates operational
status of unit.• Battery supply designed to fit through lamp
cut-out so no rear access required.• Instant ON at full brightness.
40
11300
RoHSIES Data Files available
65
LED
EM
ERG
EN
CY
LIG
HTS | O
pen A
reas 3
W 6
000K
65
AVERAGE BEAM ANGLE: 110°
DIMENSIONS
LIGHT DISTRIBUTION CURVEAll units are in mm
LED EMERGENCY LIGHTSSpacing tables
LED EMERGENCY LIGHTS | SPACING TABLES
MOUNTING HEIGHT
0.5Lux
1.0Lux
0.5Lux
1.0Lux
2.5m 4.4m 3.6m 9.9m 8.6m
3.0m 4.8m 3.8m 11.0m 9.4m
4.0m 5.2m 3.9m 12.9m 10.3m
5.0m 5.5m 3.7m 14.1m 10.8m
6.0m 5.5m 3.2m 14.8m 10.8m
8.0m 4.9m - 15.4m 9.5m
ALONG CORRIDOR (LENGTH) ACROSS CORRIDOR (WIDTH)
TO WALL BETWEEN FITTINGS TO WALL BETWEEN FITTINGS
NET-19-08-01 SPACING TABLE
MOUNTING HEIGHT
0.5 Lux
1.0 Lux
0.5 Lux
1.0 Lux
0.5 Lux
1.0 Lux
0.5Lux
1.0Lux
2.5m 5.2m 4.6m 11.9m 10.2m 2.8m 1.9m 7.2m 5.5m
3.0m 5.8m 5.1m 13.1m 11.4m 2.6m 2.1m 7.6m 5.1m
4.0m 6.9m 5.8m 15.6m 13.7m 2.8m 2.2m 7.4m 5.4m
5.0m 7.9m 5.0m 18.0m 15.5m 3.1m 2.1m 7.3m 6.0m
6.0m 8.3m 4.2m 20.1m 15.5m 3.1m 1.9m 8.0m 6.0m
8.0m 6.5m - 21.9m 12.7m 2.8m - 8.6m 5.4m
ALONG CORRIDOR (LENGTH) ACROSS CORRIDOR (WIDTH)
TO WALL BETWEEN FITTINGS TO WALL BETWEEN FITTINGS
NET-19-08-03 SPACING TABLE
MOUNTING HEIGHT
0.5Lux
1.0Lux
0.5Lux
1.0Lux
2.5m 3.9m 3.6m 8.2m 7.6m
3.0m 4.5m 4.1m 9.4m 8.7m
4.0m 5.5m 4.8m 11.8m 10.9m
5.0m 6.4m 5.0m 14.0m 12.6m
6.0m 6.4m 3.1m 16.0m 13.3m
8.0m 6.0m - 18.9m 8.5m
ALONG CORRIDOR (LENGTH) ACROSS CORRIDOR (WIDTH)
TO WALL BETWEEN FITTINGS TO WALL BETWEEN FITTINGS
NET-19-08-05 SPACING TABLE
66
LED
EM
ERG
EN
CY
LIG
HTS | S
pacin
g tab
les
66www.netled.co.uk | 01223 851505
Summary
Part Number Description Driver Power Colour Temp. Lumens Dimmable
NET-19-08-01 For use in Specific Locations Liteplan 3W 6000K 155lm N/A
NET-19-08-03 For use along Escape Routes Liteplan 3W 6000K 155lm N/A
NET-19-08-05 For use in Open Areas Liteplan 3W 6000K 155lm N/A
Manufactured by:
NET LED Lighting | Our Service, Our People, Your Choice
60 %energysaving
35,000hourslife
LED 2D Bulkheads are comprised of 16W, 4500K colour temperature Gear Trays housed in durable IP54 casings.
LED 2D Bulkheads can be purchased as a complete bulkhead incorporating both Gear Tray and IP54 casing, or Gear Tray only for retrofit projects. They are available with Emergency and Microwave Motion Sensor options to ensure they suit a range of applications.
LED 2D Bulkheads can be supplied with built-in 10% and 0% Microwave Motion Sensor options, providing automatic control of lighting. On the detection of presence, the unit powers-up to full brightness, before dimming back to 10% or 0% light output.
Sensitivity, operation time and ambient light detection are easily controllable by adjusting internal dip switches.
Perfect for stairwells and corridors.
LED 2D Bulkheads and LED Gear Trays are covered by a 3 year warranty.*
*Batteries excluded.
Manufactured by:
· Y E A R ·
WAR
RANTY3
LED 2D Bulkheads & Gear Trays
67
LED
2D
BU
LK
HEA
DS
67
A range of options are available to help you get the most from your 2D Bulkhead lighting. This includes microwave motion sensors with different output configurations and emergency functions.
All control aspects of the microwave sensor 2D Bulkhead units are set-up using the internal dip switch system. Options include ambient light detection, sensitivity, and operation time.
The SMD 2835 LED chip is an advanced chip technology with superior heat sinking which delivers more effective thermal heat dissipation, extending the life of the chips.
Maintained green LED behind the diffuser indicates the operational status of the unit in emergency versions.
APPLICATIONS: > Replaces fluorescent 2D fittings. > Bathrooms and kitchens. > Stairwells and corridors. > Housing associations.
KEY FEATURES: > Can be supplied as complete unit or Gear Tray only. > High lumen output. > IP54 rated housing. > Emergency and Microwave Motion Sensor options. > 3 year warranty (batteries excluded).
PRODUCT FEATURES: > Up to 60% energy savings. > Instant ON at full brightness. > Lasts 3-5 times longer than traditional 2D fittings. > No glass - shatterproof polycarbonate. > No mercury or lead. > Easy installation. > No flicker or hum. > Maintenance-free. > No UV light emitted. > Useful life expectancy > 35,000 hours.
www.netled.co.uk | 01223 851505 68
LED
2D
BU
LK
HEA
DS
68
69
LED
2D
BU
LK
HEA
DS | IP
54 rate
d co
mple
te u
nits
69
LED 2D BULKHEADSIP54 rated complete units
LED 2D BULKHEADS | IP54 RATED COMPLETE UNITS
NET LED Lighting | Our Service, Our People, Your Choice
110
275
325
RoHSIES Data Files available
KEY DATA ALL MODELS
Power 16W
Luminous Flux 1100lm
Colour Temperature 4500K
IP Rating IP54
Dimensions 325x110mm
Warranty 3 year
TECHNICAL SPECIFICATIONS ALL MODELS
Input Voltage 220-240V AC
Power Factor >0.95
LED Luminous Flux 1700lm
Luminous Efficacy >100lm/W
LED Manufacturer Honglitronic
LED Type SMD 2835
No. of LEDs 36 (Emergency models: 39)
Driver Manufacturer Lifud
Driver Output Voltage DC 36-42
Total Circuit Power (W) 16+/-1.5%
Electrical Class 1
Colour Rendering >80 CRI
Lamp Viewing Angle 120°
Dimmable No
Operating Temp. -15 to +50°C
Lifespan 35,000 hours
Fire Rating V-0
UGR Rating 22
Diffuser Material Polycarbonate
Housing Material/Colour Polycarbonate/White
FEATURES & BENEFITS ALL MODELS
• Durable IP54 rated housing.• SMD 2835 LED chips.• Instant ON at full brightness.• Even distribution of light through opal
polycarbonate diffuser.• 3 year warranty (batteries excluded).• Gear Tray can be purchased seperately.• IP65 rated model available (page 75).
TYPICALLY REPLACES
• 28W fluorescent 2D lamp
AVERAGE BEAM ANGLE: 120°
DIMENSIONS
LIGHT DISTRIBUTION CURVEAll units are in mm
70
LED
2D
BU
LK
HEA
DS | IP
54 rate
d co
mple
te u
nits
70
LED 2D BULKHEADSIP54 rated complete units
LED 2D BULKHEADS | IP54 RATED COMPLETE UNITS
www.netled.co.uk | 01223 851505
CHROME RING ACCESSORY FOR 2D BULKHEAD
Accessory for IP54 rated LED 2D Bulkheads.
Compatible with all models.
Part Number NET-11-06-06
www.netled.co.uk | 01223 851505
EMERGENCY
The integral Emergency function maintains the LED 2D Bulkhead for 3+ hours in emergency situations. A green LED integrated into the lamp indicates the battery status.
STANDARD
LED 2D Bulkhead unit comprises an LED Gear Tray housed in IP54 rated housing.
Part Number NET-11-06-17 Part Number NET-11-06-19
MICROWAVE MOTION SENSOR
The Microwave Motion Sensor LED 2D Bulkhead units are sensitive to movement, powering the unit up to full power when movement is detected. After a period of no detected movement, the unit will dim to either 10% light output (110lm) or 0% (no light output). Both 10% and 0% Microwave Motion Sensor units are available from NET LED.
Part Number 10% Standby NET-11-06-21
Part Number 0% Standby NET-11-06-41
MICROWAVE MOTION SENSOR + EMERGENCY
Both Microwave Motion Sensor LED 2D Bulkheads are available with or without integral emergency function. Emergency function maintains the unit for 3+ hours in emergency situations. A green LED Integrated into the lamp indicates the battery status.
Part Number 10% Standby NET-11-06-27
Part Number 0% Standby NET-11-06-43
71
LED
GEA
R T
RAY
S | R
etro
fit u
nits
71 NET LED Lighting | Our Service, Our People, Your Choice
LED GEAR TRAYSRetrofit units
LED GEAR TRAYS | RETROFIT UNITS
Ø 275 43
RoHSIES Data Files available
KEY DATA ALL MODELS
Power 16W
Luminous Flux 1700lm
Colour Temperature 4500K
Dimensions 275x43mm
Warranty 3 year
TECHNICAL SPECIFICATIONS ALL MODELS
Input Voltage 220-240V AC
Power Factor >0.95
LED Luminous Flux 1700lm
Luminous Efficacy >100lm/W
LED Manufacturer Honglitronic
LED Type SMD 2835
No. of LEDs 36 (Emergency models: 39)
Driver Manufacturer Lifud
Driver Output Voltage DC 36-42
Total Circuit Power (W) 16+/-1.5%
Electrical Class 1
Colour Rendering >80 CRI
Lamp Viewing Angle 120°
Dimmable No
Operating Temp. -15 to +50°C
Lifespan 35,000 hours
Fire Rating V-0
UGR Rating 22
FEATURES & BENEFITS ALL MODELS
• Retrofit• Instant ON at full brightness.• 3 year warranty (batteries excluded).• Can be purchased with IP65 rated housings
(page 75).
TYPICALLY REPLACES
• 28W fluorescent 2D lamp
AVERAGE BEAM ANGLE: 120°
DIMENSIONS
LIGHT DISTRIBUTION CURVEAll units are in mm
www.netled.co.uk | 01223 851505
LED GEAR TRAYSRetrofit units
LED GEAR TRAYS | RETROFIT UNITS
72
LED
GEA
R T
RAY
S | R
etro
fit u
nits
72
EMERGENCY
The integral Emergency function maintains the LED Gear Tray for 3+ hours in emergency situations. A green LED integrated into the lamp indicates the battery status.
STANDARD
LED Gear Tray for retrofit.
Part Number NET-11-06-11 Part Number NET-11-06-13
MICROWAVE MOTION SENSOR
The Microwave Motion Sensor LED Gear Tray units are sensitive to movement, powering the unit up to full power when movement is detected. After a period of no detected movement, the unit will dim to either 10% light output (110lm) or 0% (no light output). Both 10% and 0% Microwave Motion Sensor units are available from NET LED.
Part Number 10% Standby NET-11-06-15
Part Number 0% Standby NET-11-06-45
MICROWAVE MOTION SENSOR + EMERGENCY
Both Microwave Motion Sensor LED Gear Tray units are available with or without integral emergency function. Emergency function maintains the unit for 3+ hours in emergency situations. A green LED Integrated into the lamp indicates the battery status.
Part Number 10% Standby NET-11-06-29
Part Number 0% Standby NET-11-06-47
LED 2D Gear Trays can be purchased with tamper, weather and dust-proof IP65 rated housings, including:
NET-11-06-49Polycarbonate
NET-11-06-11Aluminium
Full information on IP65 rated 2D Bulkhead housings can be found on page 75.
73
LED
GEA
R T
RAY
S | S
um
mary
73
LED GEAR TRAYS | SUMMARY
LED IP65 2D BULKHEADSSummary
NET LED Lighting | Our Service, Our People, Your Choice
Part Number Description Driver Power Colour Temp. Lumens Dimmable
NET-11-06-17 2D Bulkhead Standard Lifud 16W 4500K 1100lm No
NET-11-06-19 2D Bulkhead Emergency Lifud 16W 4500K 1100lm No
NET-11-06-21 2D Bulkhead 10% Microwave Motion Sensor Lifud 16W 4500K 1100lm No
NET-11-06-27 2D Bulkhead 10% Microwave Motion Sensor Emergency Lifud 16W 4500K 1100lm No
NET-11-06-41 2D Bulkhead 0% Microwave Motion Sensor Lifud 16W 4500K 1100lm No
NET-11-06-43 2D Bulkhead 0% Microwave Motion Sensor Emergency Lifud 16W 4500K 1100lm No
NET-11-06-11 Gear Tray Standard Lifud 16W 4500K 1700lm No
NET-11-06-13 Gear Tray Emergency Lifud 16W 4500K 1700lm No
NET-11-06-15 Gear Tray 10% Microwave Motion Sensor Lifud 16W 4500K 1700lm No
NET-11-06-29 Gear Tray 10% Microwave Motion Sensor Emergency Lifud 16W 4500K 1700lm No
NET-11-06-45 Gear Tray 0% Microwave Motion Sensor Lifud 16W 4500K 1700lm No
NET-11-06-47 Gear Tray 0% Microwave Motion Sensor Emergency Lifud 16W 4500K 1700lm No
NET-11-06-06 Chrome Ring Accessory for 2D Bulkhead N/A N/A N/A N/A N/A
POINT-OF-SALE PACKAGING
LED 2D Bulkheads, Gear Trays and IP65 housings are supplied in full colour point-of-sale packaging.
LED 2D Bulkheads are also available mounted on point-of-sale ceiling tiles with a hanging info panel for your showroom or counter. Ask your Regional Sales Manager about these.
THE PROJECT
The Big Yellow Self Storage Company is a UK-based self-storage company providing solutions for homes and businesses. Operating out of 77 purpose-built storage facilities across the country, it offers spaces ranging from three foot to several thousand square feet.
As part of its continuous drive to reduce its carbon footprint, Big Yellow started a programme to replace existing fluorescent light fittings with LED equivalents. An operation of this size called for a reliable company with a quality product that delivered excellent light output, significant electricity savings and a long maintenance-free life expectancy.
THE SOLUTION
Before committing to a large-scale roll-out, Big Yellow conducted monitored trials with several LED lighting manufacturers to find a good quality retrofit LED tube. During this trial period, Big Yellow tested light output, energy consumption and appearance of several LED tubes within its storage facilities. After coming out top in these criteria, Toppo LED products were selected for installation across eight Big Yellow stores in 2012.
Following the successful installations, and with significant energy savings already achieved, Big Yellow accelerated its installation programme and installed in excess of 35,000 LED tubes in a further 34 stores in 2013.
THE RESULT
Since making the switch to LED, the company is now operating under high quality LED lighting while making substantial savings on its overheads.
By incorporating the LED tubes, Big Yellow reduced energy costs incurred by lighting by 65%. In addition, the company has seen a significant saving on maintenance costs, as the LED lighting has a life expectancy of more than 50,000 working hours.
David Knight, Estates and Facilities Manager for Big Yellow, said: “Our decision to install LED lighting across our storage facilities has made a positive impact on Big Yellow’s energy plan. We’re saving money and meeting our energy saving targets with LED tubes.”
The Big Yellow Self Storage Company
“Our decision to install LED lighting across our storage facilities has made a positive impact on The Big Yellow
Storage Company’s energy plan.”
- David KnightEstates and Facilities Manager
The Big Yellow Storage Company, 2013
CASE STUDY | THE BIG YELLOW SELF STORAGE COMPANY
www.netled.co.uk | 01223 851505
CASE STUDY
74
CA
SE S
TU
DY
| The B
ig Y
elllow
Self Sto
rage C
om
pan
y
74
Manufactured by:
NET LED Lighting | Our Service, Our People, Your Choice
60 %energysaving
35,000hourslife
The LED IP65 2D Bulkhead range is designed for outdoor use in applications with dust, water or water vapour present.
LED IP65 2D Bulkheads need to be purchased in conjunction with LED Gear Trays for full functionality. They are available with Emergency and Microwave Motion Sensor options to ensure they suit a range of applications.
We can supply LED 2D Gear Trays with built-in 10% and 0% Microwave Motion Sensor options, providing automatic control of lighting. On the detection of presence, the unit powers-up to full brightness, before dimming back to 10% or 0% light output.
Sensitivity, operation time and ambient light detection are easily controllable by adjusting internal dip switches.
Full information on LED Gear Trays can be found on page 63.
Manufactured by:
· Y E A R ·
WAR
RANTY3
LED IP65 2D Bulkheads
75
LED
IP65 2
D B
ULK
HEA
DS
75
When used with Toppo LED Gear Trays
new
A range of Gear Tray options are available to help you get the most from your 2D Bulkhead lighting. This includes microwave motion sensors with different output configurations and emergency functions.*
All control aspects of the microwave sensor 2D Bulkhead units are set-up using the internal dip switch system. Options include ambient light detection, sensitivity, and operation time.*
The SMD 2835 LED chip is an advanced chip technology with superior heat sinking which delivers more effective thermal heat dissipation, extending the life of the chips.*
Maintained green LED behind the diffuser indicates the operational status of the unit in emergency versions.*
APPLICATIONS: > Replaces fluorescent IP65 2D fittings. > Factories and warehouses. > Loading bays. > Housing associations.
KEY FEATURES: > Purchased as housing only or with LED Gear Tray. > Tamper-proof. > Water and dust-proof > Emergency and Microwave Motion Sensor options. > 3 year warranty.
PRODUCT FEATURES*: > Up to 60% energy savings. > Instant ON at full brightness. > Lasts 3-5 times longer than traditional 2D fittings. > No glass - shatterproof polycarbonate. > No mercury or lead. > Easy installation. > No flicker or hum. > Maintenance-free. > No UV light emitted. > Useful life expectancy > 35,000 hours.
www.netled.co.uk | 01223 851505 76
LED
IP65 2
D B
ULK
HEA
DS
76
*When used with Toppo LED Gear Trays
77
LED
IP65 2
D B
ULK
HEA
DS | H
ousin
gs
77 NET LED Lighting | Our Service, Our People, Your Choice
LED IP65 2D BULKHEADSHousings only
LED IP65 2D BULKHEADS | HOUSINGS ONLY
RoHSIES Data Files available
IP65 RATED HOUSING
Designed to house all Gear Tray models.
Shatterproof polycarbonate. Side conduit or rear entry.
Gear Tray sold separately.
Dimensions Ø 282 x 86.5
IP Rating IP65
Part Number NET-11-06-49
new
IP65 RATED ALUMINIUM HOUSING
Designed to house all Gear Tray models.
Tamper-proof die cast aluminium housing with shatterproof diffuser. Rear entry.
Gear Tray sold separately.
Dimensions Ø 365x140mm
IP Rating IP65
Weight 2.9kg
Part Number NET-11-06-10
HALF MOON COVER
Half Moon / Eyelid accessory for NET-11-06-10.
Die cast aluminium.
IP65 Rated Aluminium Housing sold separately.
IP Rating IP65
Weight 0.89kg
Part Number NET-11-06-25
www.netled.co.uk | 01223 851505
LED IP65 2D BULKHEADSCompatible Gear Trays
LED IP65 2D BULKHEADS | COMPATIBLE GEAR TRAYS
78
LED
IP65 2
D B
ULK
HEA
DS | C
om
patib
le G
ear Trays
78
LED IP65 2D Bulkheads need to be purchased in conjunction with LED Gear Trays. The appropriate model depends on application:
Full information on LED Gear Trays can be found on page 71.
EMERGENCY
The integral Emergency function maintains the LED Gear Tray for 3+ hours in emergency situations. A green LED integrated into the lamp indicates the battery status.
STANDARD
LED Gear Tray for retrofit.
Part Number NET-11-06-11 Part Number NET-11-06-13
MICROWAVE MOTION SENSOR
The Microwave Motion Sensor LED Gear Tray units are sensitive to movement, powering the unit up to full power when presence is detected.After a period of no detected presence, the unit will dim to either 10% light output (110lm) or 0% (no light output). Both 10% and 0% Microwave Motion Sensor units are available from NET LED.
Part Number 10% Standby NET-11-06-15
Part Number 0% Standby NET-11-06-45
MICROWAVE MOTION SENSOR + EMERGENCY
Both Microwave Motion Sensor LED Gear Tray units are available with or without integral emergency function. Emergency function maintains the unit for 3+ hours in emergency situations. A green LED Integrated into the lamp indicates the battery status.
Part Number 10% Standby NET-11-06-29
Part Number 0% Standby NET-11-06-47
NET LED Lighting | Our Service, Our People, Your Choice
70 %energysaving
50 ,000hourslife
WA
R R A N
TY
·EX
TENDED
The LED Wall Pack is an energy saving solution designed for use in commercial, industrial and other outdoor applications.
The unit delivers 3000lm of 3000K warm white light.
The LED Wall Pack is IP65 rated and perfect for use in car parks and loading bays, outside warehouses and factories, walkways and stairwells, and in general amenity and security areas.
The LED Wall Pack has been upgraded to feature an integral photocell light sensor. This automatically activates the unit at night, ensuring it is operational from dusk to dawn.
The product has a useful life expectancy of more than 50,000 hours, and is covered by a 5 Year Extended Warranty.
Manufactured by:
79
LED
WA
LL P
ACK
S
79
LED Wall Packs
new
APPLICATIONS: > Loading bays and forecourts. > Factories and warehouses. > Indoor and outdoor car parking. > Walkways and access lighting.
KEY FEATURES: > High lumen output. > Philips driver as standard. > Tamper-proof IP65 rated housing. > Photocell as standard. > 5 Year Extended Warranty.
PRODUCT FEATURES: > Up to 70% energy savings. > Instant ON at full brightness. > Lasts 3-5 times longer than fluorescent tubes. > No glass - shatterproof polycarbonate. > No mercury or lead. > Easy installation. > No flicker or hum. > Maintenance-free. > No UV light emitted. > Useful life expectancy > 50,000 hours.
Robust IP65 rated black powder coated aluminium housing with shatterproof polycarbonate diffuser offers protection from water and dust. The unit is also tamper-proof, making it perfect for outdoor use.
The LED chips are positioned around the interior of the unit ensuring an equal distribution of light from the whole unit.
The LED Wall Pack is supplied with an integral photocell, ensuring the unit is operational from dusk to dawn. Photocell feature can be bypassed as required.
The SMD 2835 LED chip is an advanced chip technology with superior heat sinking which delivers more effective thermal heat dissipation, extending the life of the chips.
LED Wall Packs can reduce energy costs by up to 70% when incorporated into an energy plan. This is great for the environment and helps you meet your carbon reduction goals.
80
LED
WA
LL P
ACK
S
80www.netled.co.uk | 01223 851505
DRIVER AS STANDARD
NET LED Lighting | Our Service, Our People, Your Choice
LED WALL PACKSPhotocell 40W 3000K
LED WALL PACKS | PHOTOCELL 40W 3000K
FEATURES & BENEFITS
• Weather, dust and vandal-proof IP65 rated housing.
• LED chips positioned strategically inside the unit for maximum distribution of light.
TECHNICAL SPECIFICATIONS
Input Voltage 220-240V AC
Power Factor >0.95
LED Luminous Flux 3600lm
Luminous Efficacy >80lm/W
LED Manufacturer Honglitronic
LED Type SMD 2835
No. of LEDs 84
Driver Manufacturer Philips
Driver Output Voltage DC 36-40
Total Circuit Power (W) 40+/-5%
Electrical Class 1
Colour Rendering >80 CRI
Lamp Viewing Angle 125°
Dimmable No
Operating Temp. 0 to +45°C
Lifespan 50,000 hours
Fire Rating V-0
UGR Rating 22
Diffuser Material Polycarbonate
Housing Material/Colour Aluminium/Black
Weight 2.7kg
KEY DATA
Power 40W
Luminous Flux 3000lm
Colour Temperature 3000K
IP Rating IP65
Dimensions 308x288x182mm
Warranty 5 Years Extended
Part Number NET-11-11-31
288
308
182
RoHSIES Data Files available
PHOTO
CELL
DRIVER AS STANDARD
new
8181
LED
WA
LL P
ACK
S | P
hoto
cell 40W
3000K
AVERAGE BEAM ANGLE: 125°
TYPICALLY REPLACES
• 70W SON
DIMENSIONS
LIGHT DISTRIBUTION CURVEAll units are in mm
CA
SE S
TU
DY
| Red Fu
nnel
THE PROJECT
Red Funnel is an integrated transport, travel and leisure company employing some 400 people in Southampton and on the Isle of Wight. Operating the largest ferry service to and from the island, Red Funnel carries over 3 million passengers each year.
The company historically incorporated fluorescent tubes in the passenger loading bays of its ferries and metal halide flood lights on deck and on their jetties. As part of their commitment to reducing energy and maintenance costs, Red Funnel chose LED Lighting for its solution.
THE SOLUTION
Because of the nature of Red Funnel’s operations, certain areas are in constant use and therefore require quality, reliable lighting at all times. The internal drivers and long life expectancy (50,000 working hours) of the LED lighting provide this reliability, as well as massively reduced maintenance costs normally associated with large-scale lighting operations. The LED Flood Lights have weather-proof IP65 housing that are perfect for use on the waves.
Opting for 5ft LED Tubes in the gangways on ferries, 2ft LED Tubes in the car decks, and high power LED Flood Lights on its jetties, Red Funnel is seeing 65% savings on its energy and maintenance costs. LED Tubes are designed with rotatable end caps allowing for quick and easy installation.
THE RESULT By incorporating LED Tubes and Floodlights into its energy plan, Red Funnel achieved high-power light output at a fraction of its historical energy spend. The company is delighted with the results of its LED fit-out and the savings they have already started to see.
Roy Pavett, Electrical Supervisor for Red Funnel, said: “As a company providing an essential service, we need to ensure our lighting is reliable whilst making a conscious effort to reduce our energy spend and carbon footprint. Installing the LED Tubes and Flood Lights has helped us achieve this.”
Red Funnel, Southampton and the Isle of Wight
“Installing the LED tubes and flood lights from NET LED has helped us improve our energy efficiency quickly and easily, and
has dramatically reduced our maintenance costs.”
- Roy PavettElectrical Supervisor
Red Funnel, 2014
82
CASE STUDY | RED FUNNEL
www.netled.co.uk | 01223 851505
CASE STUDY
NET LED Lighting | Our Service, Our People, Your Choice
70 %energysaving
50 ,000hourslife
WA
R R A N
TY
·EX
TENDED
LED High Power Flood Lights are heavy duty, low energy solutions for outdoor applications, ranging from 100W to 250W.
Outputting light at a highly efficient 110 lumens per watt, the LED Flood Light range delivers light equivalent to sodium and metal halide floods at a fraction of the energy consumption and costs.
Robust aluminium housing offers IP65 rated protection from water and dust, making the LED Flood Lights perfect for outdoor use.
A secure, heavy duty stirrup bracket makes for easy mounting on walls, brackets and poles. The units can be rotated through 180° to angle as required.
All models are supplied with Philips drivers as standard.
Manufactured by:
*
83
LED
HIG
H P
OW
ER
FLO
OD
LIG
HTS
83
LED High Power Flood Lights
Robust IP65 rated aluminium housing protects against water and dust. Fully sealed, anti-corrosive, and weather-proof, units are perfect for outdoor mounting.
High-grade shatterproof glass lens ensures entire unit is built to last.
Heavy duty stirrup bracket allows for easy, secure mounting.Units can be fixed to walls, brackets, or on poles. Bracket allows units to be rotated through +/- 90°.
One driver per LED chip array extends the useful life expectancy of the components and unit to more than 50,000 working hours.
LED Flood Lights can reduce energy costs by up to 70% when incorporated into an energy plan. This is great for the environment and helps you meet your carbon reduction goals.
APPLICATIONS: > Replaces high pressure sodium and metal halide floods. > Factories and warehouses. > Forecourts, car parks and loading bays. > Low bay applications.
KEY FEATURES: > High lumen output. > Philips driver as standard. > IP65 rated housing. > Secure stirrup bracket for safe mounting. > 5 Year Extended Warranty.
PRODUCT FEATURES: > Up to 70% energy savings. > Instant ON at full brightness. > Shatterproof glass lens. > No mercury or lead. > Easy installation. > Maintenance-free. > No UV light emitted. > Useful life expectancy > 50,000 hours.
84
LED
HIG
H P
OW
ER
FLO
OD
LIG
HTS
84www.netled.co.uk | 01223 851505
DRIVER AS STANDARD
LED HIGH POWER FLOOD LIGHTS100W 6000K
LED HIGH POWER FLOOD LIGHTS | 100W 6000K
LED
HIG
H P
OW
ER
FLO
OD
LIG
HTS | 10
0W
6000K
85
FEATURES & BENEFITS
• IP65 rated housing.• Shatterproof glass lens.• Secure stirrup bracket for safe mounting.• Housing colour grey only.• 5 Year Extended Warranty.
TECHNICAL SPECIFICATIONS
Input Voltage 220-240V AC
Power Factor >0.90
LED Luminous Flux 11000lm
Luminous Efficacy >110lm/W
LED Manufacturer Bridgelux
LED Type 45mil
LED Wattage 2x50W
Driver Manufacturer Philips
Driver Output Voltage DC 36-48
Total Circuit Power (W) 105+/-5%
Electrical Class 1
Colour Rendering >75 CRI
Lamp Viewing Angle 120°
Dimmable No
Operating Temp. 0 to +45°C
Lifespan 50,000 hours
UGR Rating 22
Diffuser Material Glass
Housing Material/Colour Aluminium/Grey
Weight 12.5kg
KEY DATA
Power 100W
Luminous Flux 8300lm
Colour Temperature 6000K
IP Rating IP65
Dimensions 425x325x200mm
Warranty 5 Year Extended
Part Number NET-15-04-11
RoHSIES Data Files available
325
425
360
220
70
155
190
90 11070
12.6
Ø 13
DRIVER AS STANDARD
AVERAGE BEAM ANGLE: 120°
TYPICALLY REPLACES
• 150W/250W metal halide• 150W/250W SON
DIMENSIONS
LIGHT DISTRIBUTION CURVEAll units are in mm
LED HIGH POWER FLOOD LIGHTS150W 6000K
LED HIGH POWER FLOOD LIGHTS | 150W 6000K
www.netled.co.uk | 01223 851505
LED
HIG
H P
OW
ER
FLO
OD
LIG
HTS | 15
0W
6000K
86
FEATURES & BENEFITS
• IP65 rated housing.• Shatterproof glass lens.• Secure stirrup bracket for safe mounting.• Housing colour grey only.• 5 Year Extended Warranty.
TECHNICAL SPECIFICATIONS
Input Voltage 220-240V AC
Power Factor >0.90
LED Luminous Flux 16500lm
Luminous Efficacy >110lm/W
LED Manufacturer Bridgelux
LED Type 45mil
LED Wattage 2x70W
Driver Manufacturer Philips
Driver Output Voltage DC 36-48
Total Circuit Power (W) 148+/-5%
Electrical Class 1
Colour Rendering >75 CRI
Lamp Viewing Angle 120°
Dimmable No
Operating Temp. 0 to +45°C
Lifespan 50,000 hours
UGR Rating 22
Diffuser Material Glass
Housing Material/Colour Aluminium/Grey
Weight 12.5kg
KEY DATA
Power 150W
Luminous Flux 13000lm
Colour Temperature 6000K
IP Rating IP65
Dimensions 425x325x200mm
Warranty 5 Year Extended
Part Number NET-15-04-13
RoHSIES Data Files available
325
425
360
200
70
155
190
90 11070
12.6
Ø 13
DRIVER AS STANDARD
AVERAGE BEAM ANGLE: 120°
TYPICALLY REPLACES
• 250W/400W metal halide• 250W/400W SON
LIGHT DISTRIBUTION CURVE
DIMENSIONS
All units are in mm
FEATURES & BENEFITS
• IP65 rated housing.• Shatterproof glass lens.• Secure stirrup bracket for safe mounting.• Housing colour grey only.• 5 Year Extended Warranty.
TECHNICAL SPECIFICATIONS
Input Voltage 220-240V AC
Power Factor >0.90
LED Luminous Flux 22000lm
Luminous Efficacy >110lm/W
LED Manufacturer Bridgelux
LED Type 45mil
LED Wattage 3x60W
Driver Manufacturer Philips
Driver Output Voltage DC 36-48
Total Circuit Power (W) 185+/-5%
Electrical Class 1
Colour Rendering >75 CRI
Lamp Viewing Angle 120°
Dimmable No
Operating Temp. 0 to +45°C
Lifespan 50,000 hours
UGR Rating 22
Diffuser Material Glass
Housing Material/Colour Aluminium/Colour
Weight 13.0kg
KEY DATA
Power 200W
Luminous Flux 16800lm
Colour Temperature 6000K
IP Rating IP65
Dimensions 425x325x200mm
Warranty 5 Year Extended
Part Number NET-15-04-15
RoHSIES Data Files available
325
425
360
200
70
155
190
90 11070
12.6
Ø 13
DRIVER AS STANDARD
AVERAGE BEAM ANGLE: 120°
LED HIGH POWER FLOOD LIGHTS | 200W 6000K
LED
HIG
H P
OW
ER
FLO
OD
LIG
HTS | 2
00W
6000K
87
LED HIGH POWER FLOOD LIGHTS200W 6000K
TYPICALLY REPLACES
• 400W metal halide• 400W SON
DIMENSIONS
LIGHT DISTRIBUTION CURVEAll units are in mm
LED HIGH POWER FLOOD LIGHTS | 250W 6000K
88
LED
HIG
H P
OW
ER
FLO
OD
LIG
HTS | 2
50W
6000K
88www.netled.co.uk | 01223 851505
FEATURES & BENEFITS
• IP65 rated housing.• Shatterproof glass lens.• Secure stirrup bracket for safe mounting.• Housing colour grey only.• 5 Year Extended Warranty.
TECHNICAL SPECIFICATIONS
Input Voltage 220-240V AC
Power Factor >0.90
LED Luminous Flux 28800lm
Luminous Efficacy >110lm/W
LED Manufacturer Bridgelux
LED Type 45mil
LED Wattage 4x60W
Driver Manufacturer Philips
Driver Output Voltage DC 36-48
Total Circuit Power (W) 246+/-5%
Electrical Class 1
Colour Rendering >75 CRI
Lamp Viewing Angle 120°
Dimmable No
Operating Temp. 0 to +45°C
Lifespan 50,000 hours
UGR Rating 22
Diffuser Material Glass
Housing Material/Colour Aluminium/Grey
Weight 13.5kg
KEY DATA
Power 250W
Luminous Flux 22000lm
Colour Temperature 6000K
IP Rating IP65
Dimensions 490x360x250mm
Warranty 5 Year Extended
Part Number NET-15-04-17
RoHSIES Data Files available
DRIVER AS STANDARD
AVERAGE BEAM ANGLE: 120°
LED HIGH POWER FLOOD LIGHTS250W 6000K
422
250
70
490
360
1340
7040
40
Ø 12.5
LIGHT DISTRIBUTION CURVE
DIMENSIONS
All units are in mm
LED HIGH POWER FLOOD LIGHTSLuminous Intensity Data
LED HIGH POWER FLOOD LIGHTS | LUMINOUS INTENSITY DATA
89
LED
HIG
H P
OW
ER
FLO
OD
LIG
HTS | Lu
min
ous In
tensity D
ata
89NET LED Lighting | Our Service, Our People, Your Choice
Summary
Part Number Description Driver Power Colour Temp. Lumens Dimmable
NET-15-04-11 LED Flood Light Philips 100W 6000K 8300lm No
NET-15-04-13 LED Flood Light Philips 150W 6000K 13000lm No
NET-15-04-15 LED Flood Light Philips 200W 6000K 16800lm No
NET-15-04-17 LED Flood Light Philips 250W 6000K 22000lm No
89 lux
52 lux
35 lux
6m
8m
10m
37sqm
67sqm
104sqm
NET-15-04-11100W
NET-15-04-13150W
maximum illumiNaTioN
37sqm
67sqm
104sqm
maximum illumiNaTioN
114 lux
67 lux
45 lux
146 lux
86 lux
58 lux
6m
8m
10m
37sqm
67sqm
104sqm
NET-15-04-15200W
NET-15-04-17250W
maximum illumiNaTioN
37sqm
67sqm
104sqm
maximum illumiNaTioN
192 lux
113 lux
75 lux
CASE STUDY | REIGATE & BANSTEAD BOROUGH COUNCIL
THE PROJECT
Bancroft Road Car Park has 5 floors and contained 350 standard fluorescent tubes of various sizes (1800mm (6ft) at 72W and 1500mm (5ft) at 59W including ballasts).
The annual power consumption for the site was 229,959 kW at a cost of £26,444 per annum. With the aid of Salix funding an energy saving solution needed to be implemented.
THE SOLUTION
Following a successful trial of LED Tubes, a complete refit of the car park lighting was undertaken replacing all 350 tubes.
The 1800mm (6ft) 72W fluorescents were replaced with LED Tubes consuming only 22W and the 1500mm (5ft) 59W fluorescents with 18W LED Tubes.
The work was undertaken by DH Croft Ltd.
THE RESULT The end result not only provided a far better level of lighting, as can be clearly seen in the 2 photos, but more importantly, following detailed power consumption monitoring before and after the installation, the annual savings are calculated at £13,390. This equates to a carbon footprint reduction of 67 tonnes CO2.
In addition to these savings, the ongoing maintenance costs will also be greatly reduced as the expected life of the new LED Tubes is in excess of 50,000 hours (11 years assuming 12 hours usage per day).
Reigate and Banstead Borough Council
“We achieved a payback in 2 years, equating to an annual energy cost saving of £13,500 per annum, and greatly improved
lighting in public areas.”
- Raymond DillEnvironmental Initiatives Officer
Reigate and Banstead Borough Council, 2010
BEFORE: Fluorescent AFTER: LED
www.netled.co.uk | 01223 851505
CASE STUDY
90
CA
SE S
TU
DY
| Reigate
& B
anste
ad B
oro
ugh
Council
90
NET LED Lighting | Our Service, Our People, Your Choice
The range of LED Slimline Flood Lights are lightweight and versatile.
They are available in 10W, 30W, 50W, 80W and 100W versions with the option to incorporate a PIR motion detector.
Suitable for outdoor applications, the LED components are housed in a robust, weather-proof, IP66 rated black aluminium casing.
The units have secure adjustable stirrup brackets which allow for easy mounting on walls, poles, posts and other surfaces.
LED Slimline Flood Lights are perfect for use in open areas, above doors and outdoor shutters, as security or signage lighting and domestic applications.
Manufactured by:
70 %energysaving
35,000hourslife
· Y E A R ·
WAR
RANTY3
91
LED
SLIM
LIN
E F
LO
OD
LIG
HTS
91
LED Slimline Flood Lights
new
APPLICATIONS: > Replaces sodium and metal halide flood lights. > Factories and warehouses. > Forecourts, car parks and loading bays. > Domestic applications.
KEY FEATURES: > High lumen output. > Operational in a wide temperature range. > IP66 rated housing. > Secure stirrup bracket for easy mounting. > PIR-compatible.
PRODUCT FEATURES: > Up to 70% energy savings. > Instant ON at full brightness. > Shatterproof glass lens. > No mercury or lead. > Easy installation. > Maintenance-free. > No UV light emitted. > Useful life expectancy > 35,000 hours.
Slimline, lightweight body makes the Slimline LED Flood Light a versatile unit that is easy to install and discreet when not in use.
Robust IP66 rated aluminium housing protects against water and dust. Fully sealed, anti-corrosive, and weather-proof, units are perfect for outdoor mounting.
High-grade shatterproof glass lens ensures entire unit is built to last.
Stirrup bracket allows for easy, secure mounting.Units can be fixed to walls, brackets, or on poles. Bracket allows units to be rotated through +/- 90°.
All Slimline LED Flood Lights are compatible with our dedicated PIR motion sensor unit. Each unit has a removable dust cap for easy PIR attachment.
92
LED
SLIM
LIN
E F
LO
OD
LIG
HTS
92www.netled.co.uk | 01223 851505
NET LED Lighting | Our Service, Our People, Your Choice
LED SLIMLINE FLOOD LIGHTS10W 6000K
LED SLIMLINE FLOOD LIGHTS | 10W 6000K
KEY DATA
Power 10W
Luminous Flux 650lm
Colour Temperature 6000K
IP Rating IP66
Dimensions 125x120x40mm
Weight 0.7kg
Warranty 3 years
Part Number NET-15-04-31
TECHNICAL SPECIFICATIONS
Input Voltage 100-240V AC
Power Factor >0.90
LED Luminous Flux 900lm
Luminous Efficacy >100lm/W
LED Manufacturer Epistar
Driver Manufacturer Leyond
Driver Output Voltage DC 36-48
Colour Rendering >70 CRI
Electrical Class 2
Lamp Viewing Angle 120°
Dimmable No
Operating Temp. -15 to +50°C
Lifespan 35,000 hours
UGR Rating 22
Diffuser Material Glass
Housing Material/Colour Aluminium/Black
FEATURES & BENEFITS
• Lightweight, slimline body.• IP66 rated aluminium housing.• Shatterproof glass lens.• PIR compatibility.• Secure stirrup bracket for safe mounting.• Housing colour black only.
RoHSIES Data Files available
125
135
3571100
6.5
Ø 8
93
LED
SLIM
LIN
E F
LO
OD
LIG
HTS | 10
W 6
000K
93
AVERAGE BEAM ANGLE: 120°
PIR COMPATIBLE
new
TYPICALLY REPLACES
• 100W/150W tungsten halogen
DIMENSIONS
LIGHT DISTRIBUTION CURVEAll units are in mm
LED SLIMLINE FLOOD LIGHTS30W 6000K
LED SLIMLINE FLOOD LIGHTS | 30W 6000K
TECHNICAL SPECIFICATIONS
Input Voltage 100-240V AC
Power Factor >0.90
LED Luminous Flux 2700lm
Luminous Efficacy >100lm/W
LED Manufacturer Epistar
Driver Manufacturer Leyond
Driver Output Voltage DC 36-48
Colour Rendering >70 CRI
Electrical Class 2
Lamp Viewing Angle 120°
Dimmable No
Operating Temp. -15 to +50°C
Lifespan 35,000 hours
UGR Rating 22
Diffuser Material Glass
Housing Material/Colour Aluminium/Black
FEATURES & BENEFITS
• Lightweight, slimline body.• IP66 rated aluminium housing.• Shatterproof glass lens.• PIR compatibility.• Secure stirrup bracket for safe mounting.• Housing colour black only.
KEY DATA
Power 30W
Luminous Flux 2100lm
Colour Temperature 6000K
IP Rating IP66
Dimensions 225x220x50mm
Weight 1.5kg
Warranty 3 year warranty
Part Number NET-15-04-33
RoHSIES Data Files available
225
220
232
50
170
66136208 10
.3
Ø 13.6
PIR COMPATIBLE
94
LED
SLIM
LIN
E F
LO
OD
LIG
HTS | 3
0W
6000K
94
AVERAGE BEAM ANGLE: 120°
new
www.netled.co.uk | 01223 851505
TYPICALLY REPLACES
• 70W metal halide• 70W SON• 300W tungsten halogen
300
LIGHT DISTRIBUTION CURVE
DIMENSIONS
All units are in mm
NET LED Lighting | Our Service, Our People, Your Choice
LED SLIMLINE FLOOD LIGHTS | 50W 6000K
TECHNICAL SPECIFICATIONS
Input Voltage 100-240V AC
Power Factor >0.90
LED Luminous Flux 4500lm
Luminous Efficacy >100lm/W
LED Manufacturer Epistar
Driver Manufacturer Leyond
Driver Output Voltage DC 36-48
Colour Rendering >70 CRI
Electrical Class 2
Lamp Viewing Angle 120°
Dimmable No
Operating Temp. -15 to +50°C
Lifespan 35,000 hours
UGR Rating 22
Diffuser Material Glass
Housing Material/Colour Aluminium/Black
FEATURES & BENEFITS
• Lightweight, slimline body.• IP66 rated aluminium housing.• Shatterproof glass lens.• PIR compatibility.• Secure stirrup bracket for safe mounting.• Housing colour black only.
LED SLIMLINE FLOOD LIGHTS50W 6000K
KEY DATA
Power 50W
Luminous Flux 3500lm
Colour Temperature 6000K
IP Rating IP66
Dimensions 285x275x55mm
Weight 1.6kg
Warranty 3 years
Part Number NET-15-04-35
RoHSIES Data Files available
285
367
280
55
275
177
186245
Ø 15
95
LED
SLIM
LIN
E F
LO
OD
LIG
HTS | 5
0W
6000K
116
95
AVERAGE BEAM ANGLE: 120°
TYPICALLY REPLACES
• 70W metal halide• 70W SON• 500W tungsten halogen
PIR COMPATIBLE
new
DIMENSIONS
LIGHT DISTRIBUTION CURVEAll units are in mm
LED SLIMLINE FLOOD LIGHTS80W 6000K
LED SLIMLINE FLOOD LIGHTS | 80W 6000K
TECHNICAL SPECIFICATIONS
Input Voltage 100-240V AC
Power Factor >0.90
LED Luminous Flux 7200lm
Luminous Efficacy >100lm/W
LED Manufacturer Epistar
Driver Manufacturer Leyond
Driver Output Voltage DC 36-48
Colour Rendering >70 CRI
Electrical Class 2
Lamp Viewing Angle 120°
Dimmable No
Operating Temp. -15 to +50°C
Lifespan 35,000 hours
UGR Rating 22
Diffuser Material Glass
Housing Material/Colour Aluminium/Black
FEATURES & BENEFITS
• Lightweight, slimline body.• IP66 rated aluminium housing.• Shatterproof glass lens.• PIR compatibility.• Secure stirrup bracket for safe mounting.• Housing colour black only.
KEY DATA
Power 80W
Luminous Flux 5600lm
Colour Temperature 6000K
IP Rating IP66
Dimensions 290x290x90mm
Weight 3kg
Warranty 3 years
Part Number NET-15-04-37
RoHSIES Data Files available
290
290
310
420
90
225
116186272
Ø 15
PIR COMPATIBLE
96
LED
SLIM
LIN
E F
LO
OD
LIG
HTS | 8
0W
6000K
96
AVERAGE BEAM ANGLE: 120°
new
www.netled.co.uk | 01223 851505
TYPICALLY REPLACES
• 150W metal halide
LIGHT DISTRIBUTION CURVE
DIMENSIONS
All units are in mm
NET LED Lighting | Our Service, Our People, Your Choice
LED SLIMLINE FLOOD LIGHTS100W 6000K
LED SLIMLINE FLOOD LIGHTS | 100W 6000K
97
LED
SLIM
LIN
E F
LO
OD
LIG
HTS | 10
0W
6000K
97
TECHNICAL SPECIFICATIONS
Input Voltage 100-240V AC
Power Factor >0.90
LED Luminous Flux 9100lm
Luminous Efficacy >100lm/W
LED Manufacturer Epistar
Driver Manufacturer Leyond
Driver Output Voltage DC 36-48
Colour Rendering >70 CRI
Electrical Class 2
Lamp Viewing Angle 120°
Dimmable No
Operating Temp. -15 to +50°C
Lifespan 35,000 hours
UGR Rating 22
Diffuser Material Glass
Housing Material/Colour Aluminium/Black
FEATURES & BENEFITS
• Lightweight, slimline body.• IP66 rated aluminium housing.• Shatterproof glass lens.• PIR compatibility.• Secure stirrup bracket for safe mounting.• Housing colour black only.
KEY DATA
Power 100W
Luminous Flux 7300lm
Colour Temperature 6000K
IP Rating IP66
Dimensions 290x290x90mm
Weight 3kg
Warranty 3 years
Part Number NET-15-04-47
290
290
310
420
90
225
116186272
Ø 14.6
AVERAGE BEAM ANGLE: 120°
TYPICALLY REPLACES
• 150W/250W metal halide
55
RoHSIES Data Files available
DIMENSIONS
LIGHT DISTRIBUTION CURVEAll units are in mm
PIR COMPATIBLE
new
KEY DATA
Input Voltage 220-240 V AC
Power Frequency 50/60Hz
Maximum Load 100W
Maximum Detection Distance > 8m
Detection Angle 140°
Installation Height 0.5 - 3.5m
Operating Temp. -15 - +40°C
Duration 8 sec. - 15 min.
Lux Levels 2 - 2000 lux
Warranty 1 year
Part Number NET-15-04-39
FEATURES & BENEFITS
• Compatible with all LED Slimline Flood Lights attached via PIR connector port on bottom of Flood Light.
• Twist ‘n’ lock connector forms waterproof seal when installed.
• Instant ON at full brightness.• Duration of illumination and ambient lux
detection controllable from base of unit.
LED SLIMLINE FLOOD LIGHTSPIR Motion Sensor
LED SLIMLINE FLOOD LIGHTS | PIR MOTION SENSOR
98
LED
SLIM
LIN
E F
LO
OD
LIG
HTS | P
IR M
otio
n S
enso
r
98
new
www.netled.co.uk | 01223 851505
Part Number Description Driver Power Colour Temp. Lumens Dimmable
NET-15-04-31 LED Slimline Flood Light Leyond 10W 6000K 650lm No
NET-15-04-33 LED Slimline Flood Light Leyond 30W 6000K 2100lm No
NET-15-04-35 LED Slimline Flood Light Leyond 50W 6000K 3500lm No
NET-15-04-37 LED Slimline Flood Light Leyond 80W 6000K 5600lm No
NET-15-04-47 LED Slimline Flood Light Leyond 100W 6000K 7300lm No
NET-15-04-39 PIR Sensor for LED Slimline Flood Light N/A N/A N/A N/A N/A
Summary
POINT-OF-SALE PACKAGING
LED Slimline Flood Lights and PIR Motion Sensors have been packaged for display purposes.
NET LED Lighting | Our Service, Our People, Your Choice
70 %energysaving
50 ,000hourslife
WA
R R A N
TY
·EX
TENDED
The LED High Bays are indoor luminaires designed to deliver a high lumen output from heights between 6 and 10 meters.
The units incorporate shatterproof PMMA lenses that focus the light to a 60° beam angle, removing the need for an open-front reflector to direct the light.
The LED High Bay range is perfect for use in warehouses, gyms, airports, and anywhere with high ceilings that require a high level of focused light.
With a long lifespan upwards of 50,000 hours thanks to its built-in heat sink that protects the driver from overheating, LED High Bays will remain maintenance-free in high areas.
Delivering 90 lumens per Watt, LED High Bays will cut the energy costs in applications replacing conventional high bay lighting by up to 70%.
Manufactured by:
99
LED
HIG
H B
AY
S
99
LED High Bays
APPLICATIONS: > Replaces metal halide high bays. > Factories and warehouses. > Gyms and supermarkets. > Airports.
KEY FEATURES: > High lumen output. > For use at heights between 6 and 10 metres. > Highly efficient heat sink to extend product life. > Built-in driver. > 5 Year Extended Warranty.
PRODUCT FEATURES: > Up to 70% energy savings. > Instant ON at full brightness. > No glass - shatterproof PMMA. > No mercury or lead. > Easy installation. > Maintenance-free. > No UV light emitted. > Useful life expectancy > 50,000 hours.
Designed for use at height/distance of 6-10m. Perfect for use in warehouses, factories, printing presses, airports, supermarkets, and other applications that require a high light output suspended from height.
The unit’s lenses are manufactured from high-grade PMMA - a transparent thermoplastic that offers high light transmission and an extremely long life.
The LED High Bay is manufactured to be lightweight. This makes it a versatile choice that is easily installed in a range of applications by a competent qualified electrician.
The LED High Bay’s heat sink is positioned directly over the LEDs, ensuring heat dissipates quickly and effectively. This protects the driver and extends the product lifespan to more than 50,000 hours.
LED High Bays can reduce energy costs by up to 70% when incorporated into an energy plan. This is great for the environment and helps you meet your carbon reduction goals.
100
LED
HIG
H B
AY
S
100www.netled.co.uk | 01223 851505
DRIVER AS STANDARD
NET LED Lighting | Our Service, Our People, Your Choice
LED HIGH BAYS100W 5000K
LED HIGH BAYS | 100W 5000K
FEATURES & BENEFITS
• Focused beam for high lux levels when used in applications between 6-10m height.
• Lightweight yet robust construction.• High efficiency heat sink.• Secure suspension ring for easy installation.
TECHNICAL SPECIFICATIONS
Input Voltage 100-240V AC
Power Factor >0.95
LED Luminous Flux 11800lm
Luminous Efficacy >85lm/W
LED Manufacturer Cree
LED Type CXA2530
Driver Manufacturer Mean Well
Driver Output Voltage DC 36-48
Total Circuit Power (W) 100+/-5%
Electrical Class 2
Colour Rendering >70 CRI
Lamp Viewing Angle 60°
Dimmable No
Operating Temp. -15 t`o +50°C
Lifespan 50,000 hours
UGR Rating 22
Diffuser Material PMMA
Housing Material/Colour Aluminium/Black
Weight 6.0kg
KEY DATA
Power 100W
Luminous Flux 10600lm
Colour Temperature 5000K
IP Rating IP41
Dimensions ø 240x302x312mm
Warranty 5 Year Extended
Part Number NET-15-12-01
Ø 240
302
312
RoHSIES Data Files available
101
LED
HIG
H B
AY
S | 10
0W
5000K
101
AVERAGE BEAM ANGLE: 60°
TYPICALLY REPLACES
• 150W/250W metal halide• 150W/250W SON
DRIVER AS STANDARD
DIMENSIONS
LIGHT DISTRIBUTION CURVEAll units are in mm
LED HIGH BAYS150W 5000K
LED HIGH BAYS | 150W 5000K
Ø 260
302
332
FEATURES & BENEFITS
• Focused beam for high lux levels when used in applications between 6-10m height.
• Lightweight yet robust construction.• High efficiency heat sink.• Secure suspension ring for easy installation.
TECHNICAL SPECIFICATIONS
Input Voltage 100-240V AC
Power Factor >0.95
LED Luminous Flux 18000lm
Luminous Efficacy >90lm/W
LED Manufacturer Cree
LED Type CXA2540
Driver Manufacturer Mean Well
Driver Output Voltage DC 36-48
Total Circuit Power (W) 145+/-5%
Electrical Class 2
Colour Rendering >70 CRI
Lamp Viewing Angle 60°
Dimmable No
Operating Temp. -15 to +50°C
Lifespan 50,000 hours
UGR Rating 22
Diffuser Material PMMA
Housing Material/Colour Aluminium/Black
Weight 6.2kg
KEY DATA
Power 150W
Luminous Flux 15200lm
Colour Temperature 5000K
IP Rating IP41
Dimensions ø 260x302x332mm
Warranty 5 Years Extended
Part Number NET-15-12-05
RoHSIES Data Files available
102
LED
HIG
H B
AY
S | 15
0W
5000K
102
AVERAGE BEAM ANGLE: 60°
www.netled.co.uk | 01223 851505
TYPICALLY REPLACES
• 250W/400W metal halide• 250W/400W SON
DRIVER AS STANDARD
LIGHT DISTRIBUTION CURVE
DIMENSIONS
All units are in mm
NET LED Lighting | Our Service, Our People, Your Choice
LED HIGH BAYS200W 5000K
LED HIGH BAYS | 200W 5000K
TECHNICAL SPECIFICATIONS
Input Voltage 100-240V AC
Power Factor >0.90
LED Luminous Flux 21600lm
Luminous Efficacy >90lm/W
LED Manufacturer Cree
LED Type CXA3050
Driver Manufacturer Mean Well
Driver Output Voltage DC 36-48
Total Circuit Power (W) 180+/-5%
Electrical Class 2
Colour Rendering >70 CRI
Lamp Viewing Angle 60°
Dimmable No
Operating Temp. -40 to +60°C
Lifespan 50,000 hours
UGR Rating 22
Diffuser Material PMMA
Housing Material/Colour Aluminium/Black
Weight 6.5kg
KEY DATA
Power 200W
Luminous Flux 17000lm
Colour Temperature 5000K
IP Rating IP41
Dimensions ø 260x302x332mm
Warranty 5 Years Extended
Part Number NET-15-12-07
FEATURES & BENEFITS
• Focused beam for high lux levels when used in applications between 6-10m height.
• Lightweight yet robust construction.• High efficiency heat sink.• Secure suspension ring for easy installation.
Ø 260
302
332
RoHSIES Data Files available
103
LED
HIG
H B
AY
S | 2
00W
5000K
103
AVERAGE BEAM ANGLE: 60°
TYPICALLY REPLACES
• 400W metal halide• 400W SON
DRIVER AS STANDARD
DIMENSIONS
LIGHT DISTRIBUTION CURVEAll units are in mm
LED HIGH BAYS | LUMINOUS INTENSITY DATA
LED HIGH BAYSLuminous Intensity Data
224 lux
132 lux
86 lux
6m
8m
10m
37sqm
67sqm
104sqm
6m
8m
10m
NET-15-12-01100W
NET-15-12-05150W
maximum illumiNaTioN
37sqm
67sqm
104sqm
37sqm
67sqm
104sqm
maximum illumiNaTioN
295 lux
176 lux
114 lux
317 lux
188 lux
124 lux
NET-15-12-07200W
maximum illumiNaTioN
104
LED
HIG
H B
AY
S | Lu
min
ous In
tensity D
ata
104www.netled.co.uk | 01223 851505
Part Number Description Driver Power Colour Temp. Lumens Dimmable
NET-15-12-01 LED High Bay Mean Well 100W 5000K 10500lm No
NET-15-12-05 LED High Bay Mean Well 150W 5000K 15200lm No
NET-15-12-07 LED High Bay Mean Well 200W 5000K 17000lm No
Summary
NET LED Lighting | Our Service, Our People, Your Choice
70 %energysaving
50 ,000hourslife
NET LED Lighting is a UK distributor of the full explosion-proof and protected range by the German specialist applications lighting manufacturer SCHUCH.
SCHUCH hazardous area fittings available through NET LED include explosion proof and protected LED flood lights, high bays, emergency lights and batten luminaires.
The units in these ranges have been designed for use in hazardous zones where explosive materials are present.
With more than 100 years experience solving problems related to lighting hazardous areas, SCHUCH is now manufacturing fittings that incorporate energy saving LED technology.
SCHUCH’s research and development has significantly influenced the explosion-protected lighting market of today, as well as the development of relevant industry standards.
We can provide a dedicated SCHUCH product catalogue featuring the full range of hazardous area products.
Manufactured by:
105
LED
HA
ZA
RD
OU
S A
REA
LIG
HT F
ITTIN
GS
105
LED for Zones 1/21, 2/22
ZONES 1 / 2 - GASES, VAPOURS & MISTS > Zone 1: Flammable areas likely in normal operation
occasionally. Typically 10-1000 hours per year. > Zone 2: Flammable areas unlikely in normal operation
and, if it occurs, will only exist for a short time. Typically 1-10 hours per year.
ZONES 21 / 22 - FLAMMABLE DUSTS > Zones 21: Flammable areas likely in normal operation
occasionally. Typically 10-1000 hours per year. > Zone 2: Flammable areas unlikely in normal operation
and, if it occurs, will only exist for a short time. Typically 1-10 hours per year.
PRODUCT FEATURES: > Up to 70 % energy savings. > Explosion proof and protected. > Operational in wide temperature range > Resistant against vibrations and shaking. > Maintenance-free. > No UV light emitted. > Useful life expectancy > 50,000 hours.
LED fittings manufactured by SCHUCH offer different levels of protection fit for specific applications. Always have areas independently audited by an accredited hazardous area expert.
SCHUCH products are manufactured from high quality materials. This ensures they are robust and fit for purpose. Materials include die cast aluminium, injected polycarbonate, and British Standard Marine Grade aluminium alloy.
SCHUCH light fittings operate in a wide temperature range, ensuring versatility in a range of applications.
Both the robust luminaires and the LED components are virtually maintenance-free. This reduces repair and replacement costs, as well as maintenance downtime.
SCHUCH’s LED products can reduce energy costs by up to 70% when incorporated into an energy plan. This is great for the environment and helps you meet your carbon reduction goals.
106
LED
HA
ZA
RD
OU
S A
REA
LIG
HT F
ITTIN
GS
106www.netled.co.uk | 01223 851505
To request a full SCHUCH catalogue, data sheets, and to check availability, contact us on 01223 851505.
Manufactured by:
NET LED Lighting | Our Service, Our People, Your Choice
In response to the demand for intelligent LED lighting control for project-style lighting design, we supply DALI and 1-10V dimming drivers specially calibrated for NET LED products.
The LCM DA models have a built-in DALI interface, offering digitally addressable control of our LED products.
LCM 1-10Vs are developed with multi-stage output current LED power supply and constant current output. The output current level can be selected by adjusting the built-in dip switch, allowing for greater control flexibility.
All products comply with UL8740, ENEC EN61347-2-13, and EN62384. LCM DAs also comply with IEC62386-101, 102 and 207 norms, per DALI lighting control systems.
· Y E A R ·
WAR
RANTY3
107
LED
LIG
HTIN
G C
ON
TRO
LS
LED Lighting Controls
107
Digitally Addressable Lighting Interface (DALI) is a data protocol and transfer mechanism that facilitates dimming control and network connectivity for changing light levels in an environment.
1-10V dimming enables analogue stepless dimming for our LED Panels and Downlights. This is a straightforward option for flexible control of light levels from 100% light output down to 10% with a linear progression.
Flexible control for 1-10V dimming through a dedicated dimmer switch. This switch is provided with a number of popular face plates for compatibility.
DALI and 1-10V dimming drivers are suitable for use with all colour temperature variations of our 22W 32W, 40W and 60W LED Panel Lights, 36W Grid Luminaire and 22W LED Downlights.
DALI and 1-10V dimming drivers are suitable for use with our 22W LED Downlight units.
APPLICATIONS: > Offices and retail. > Meeting rooms and conference rooms. > Hospitals and schools. > Architectural lighting.
KEY FEATURES: > Flexible dimming options. > For use with 22W, 32W, 40W and 60W LED Panels
and Downlights. > Built-in protection against short circuit, over-voltage
and over-heating. > 3 year warranty.
POWER SUPPLY SYNCHRONISATION: > LED Panel Lights and Downlights driven by LCM units
(slaves) can be dimmed synchronously through an LCM unit (master) directly controlled via 0-10V DC, 10V PWM, DALI, or push dimming function.
> Maximum cable length between each unit: 20m.
108
LED
LIG
HTIN
G C
ON
TRO
LS
www.netled.co.uk | 01223 851505 108
NET LED Lighting | Our Service, Our People, Your Choice
LED LIGHTING CONTROLSDALI and 1-10V Dimming
LED LIGHTING CONTROLS | DALI AND 1-10V DIMMING
109
LED
LIG
HTIN
G C
ON
TRO
LS | D
ALI an
d 1-10
V D
imm
ing
109
DALI Dimming Driver 22W
Power 25W
Input Voltage 180-295V AC
Power Factor >0.97
AC Current 0.17A/230VAC
Output Current 500mA
IP Rating IP20
Dimensions 105x68x23mm
Weight 240g
DALI Standards IEC62386-101, 102, 207
Part Number NET-29-43-05
DALI Dimming Driver 40W
Power 40W
Input Voltage 180-295V AC
Power Factor >0.97
AC Current 0.23A/230V AC
Output Current 750mA/900mA
IP Rating IP20
Dimensions 124x82x23mm
Weight 240g
DALI Standards IEC62386-101, 102, 207
Part Number NET-29-43-01
RoHS
DALI Dimming Driver 60W
Power 60W
Input Voltage 180-295V AC
Power Factor >0.97
AC Current 0.32A/230V AC
Output Current 1400mA
IP Rating IP20
Dimensions 124x82x23mm
Weight 240g
DALI Standards IEC62386-101, 102, 207
Part Number NET-29-43-07
LED LIGHTING CONTROLSDALI and 1-10V Dimming
LED LIGHTING CONTROLS | DALI AND 1-10V DIMMING
110
LED
LIG
HTIN
G C
ON
TRO
LS | D
ALI an
d 1-10
V D
imm
ing
www.netled.co.uk | 01223 851505 110
Dimmer for 1-10V Dimming Driver
Type 4A Push Switch
Colour White
Dimensions 72x72x35mm
Weight 100g
Dimming Standards 1-10V DC Grid Dimmer
Plate Compatibility MK (Logic and Grid Plus)
MEM Grid System
Wandsworth Grid System
Crabtree Grid System
Hamilton Grid System
Part Number NET-31-43-05
by
1-10V Dimming Driver 22W
Power 25W
Input Voltage 180-295V AC
Power Factor >0.97
AC Current 0.17A/230VAC
Output Current 500mA
IP Rating IP20
Dimensions 105x68x23mm
Weight 240g
Part Number NET-29-43-09
1-10V Dimming Driver 40W
Power 40W
Input Voltage 180-295V AC
Power Factor >0.97
AC Current 0.23A/230V AC
Output Current 750mA/900mA
IP Rating IP20
Dimensions 124x82x23mm
Weight 240g
Part Number NET-29-43-03
1-10V Dimming Driver 60W
Power 60W
Input Voltage 180-295V AC
Power Factor >0.97
AC Current 0.32A/230V AC
Output Current 1400mA
IP Rating IP20
Dimensions 124x82x23mm
Weight 240g
Part Number NET-29-43-11
NET LED Lighting | Our Service, Our People, Your Choice
LED LIGHTING CONTROLSReplacement Drivers
LED LIGHTING CONTROLS | REPLACEMENT DRIVERS
111
LED
LIG
HTIN
G C
ON
TRO
LS | R
eplacem
ent D
rivers
111
PHILIPS LED DRIVER 21W
Power 21W
Input Voltage 220-240V AC
Power Factor >0.9
Output Current 500mA
Output DC Voltage 32-42V
IP Rating IP20
Dimensions 115x45x29mm
Weight 155g
Part Number NET-11-43-07
PHILIPS LED DRIVER 32W
Power 32W
Input Voltage 220-240V AC
Power Factor >0.9
Output Current 700mA
Output DC Voltage 32-42V
IP Rating IP20
Dimensions 105x68x32mm
Weight 260g
Part Number NET-11-43-09
PHILIPS LED DRIVER 44W
Power 44W
Input Voltage 220-240V AC
Power Factor >0.9
Output Current 900mA
Output DC Voltage 32-42V
IP Rating IP20
Dimensions 105x68x32mm
Weight 275g
Part Number NET-11-43-11
LIFUD LED DRIVER 60W
Power 60W
Input Voltage 220-240V AC
Power Factor >0.95
Output Current 1400mA
Output DC Voltage 36-42V
IP Rating IP20
Dimensions 235x65x30mm
Weight 340g
Part Number NET-11-43-13
Part Number Description Driver Power Colour Temp. Lumens Dimmable
NET-29-43-05 DALI LED Dimming Driver for 22W LED Panel Light Mean Well 25W N/A N/A Yes
NET-29-43-01 DALI LED Dimming Driver for 32W/40W LED Panel Light Mean Well 40W N/A N/A Yes
NET-29-43-07 DALI LED Dimming Driver for 60W LED Panel Light Mean Well 60W N/A N/A Yes
NET-29-43-09 1-10V Dimming Driver for 22W LED Panel Light Mean Well 25W N/A N/A Yes
NET-29-43-03 1-10V Dimming Driver for 32W/40W LED Panel Light Mean Well 40W N/A N/A Yes
NET-29-43-11 1-10V Dimming Driver for 60W LED Panel Light Mean Well 60W N/A N/A Yes
NET-31-43-05 Dimmer for 1-10V Dimming Drivers N/A N/A N/A N/A Yes
NET-11-43-07 Philips LED Driver Philips 21W N/A N/A No
NET-11-43-09 Philips LED Driver Philips 32W N/A N/A No
NET-11-43-11 Philips LED Driver Philips 44W N/A N/A No
NET-11-43-13 Lifud LED Driver Lifud 60W N/A N/A No
LED LIGHTING CONTROLS | SUMMARY
112
LED
LIG
HTIN
G C
ON
TRO
LS | S
um
mary
www.netled.co.uk | 01223 851505 112
LED DRIVERSSummary
Manufactured by:
NET LED Lighting | Our Service, Our People, Your Choice
3 Hour Emergency Kits have been developed and calibrated to support the LED lighting products distributed by NET LED. They are manufactured in the UK by Liteplan.
All 3 Hour Emergency Kit products conform to emergency lighting standards BS EN 61347-2-7 and carry the British Kite Mark.
Units are delivered in kit form.
Liteplan’s experienced engineers are able to provide a technical support service for all enquiries.
3 Hour Emergency Kits are covered by a 3 year warranty.*
*Batteries excluded.
· Y E A R ·
WAR
RANTY3
113
3 H
OU
R E
MERG
EN
CY
KIT
S
3 Hour Emergency Kits
113
BUILT TO SUPPORT: > LED T5 and T8 LED Tubes. > LED Panel Lights and Grid Luminaires. > LED Downlights. > LED NCF Luminaires and Batten Luminaires.
KEY FEATURES: > Specially calibrated for optimum performance. > Protected against short circuit, over-voltage and over-heat. > Low profile enclosure. > Conforms to emergency standard BS EN 61347-2-7. > Manufactured in the UK.
PRODUCT FEATURES: > Maintains compatible LED products for 3 hours at not
less than 3W. > Automatically adjusts output LED current to match
between battery and LED load, providing maximum illumination while ensuring 3 hour duration.
> 3 x 4.5Ah D Ni-Cd batteries included. > Delivered in kit form.
All 3 Hour Emergency Kits are specially calibrated to their respective LED products. This ensures optimum performance.
Maintained green LED indicates the operational status of the unit in emergency versions for quick visual reference.
3 Hour Emergency Kits are delivered in kit form ready for installation by a competent qualified electrician (detailed installation instructions provided).
Units have built-in protection against short circuit, over-voltage and over-heating.
All units are manufactured to conform to emergency lighting standards BS EN 61347-2-7.
114
3 H
OU
R E
MERG
EN
CY
KIT
S
www.netled.co.uk | 01223 851505 114
NET LED Lighting | Our Service, Our People, Your Choice
3 HOUR EMERGENCY KITSVarious
3 HOUR EMERGENCY KITS | VARIOUS
FOR LED T5/T8 TUBES
Power 5W
Input Voltage 230-240V AC
Power Factor >0.90
Battery Current Limit 260mA
Output Voltage up to 85V
Battery Pack 3 x 4.5Ah D Ni-Cd 3.6V
Battery Cut-Off 3V
Recharge Period 24H
Hours Maintained >3H
Operating Temp, 0 to +50°C
Dimensions (excl. Battery) 165x45x29mm
Weight 700g
Part Number NET-19-33-01
FOR LED PANELS AND LED DOWNLIGHTS
Power 5W
Input Voltage 230-240V AC
Power Factor >0.90
Battery Current Limit 260mA
Output Voltage up to 45V
Battery Pack 3 x 4.5Ah D Ni-Cd 3.6V
Battery Cut-Off 3V
Recharge Period 24H
Hours Maintained >3H
Operating Temp, 0 to +50°C
Dimensions (excl. Battery) 235x35x52mm
Weight 900g
Part Number NET-19-33-03
DALI addressable version NET-19-33-15
FOR LED NCF AND BATTEN LUMINAIRES
Power 5W
Input Voltage 230-240V AC
Power Factor >0.90
Battery Current Limit 260mA
Output Voltage up to 45V
Battery Pack 3 x 4.5Ah D Ni-Cd 3.6V
Battery Cut-Off 3V
Recharge Period 24H
Hours Maintained >3H
Operating Temp, 0 to +50°C
Dimensions (excl. Battery) 165x45x29mm
Weight 700g
Part Number NET-19-33-09
115
3 H
OU
R E
MERG
EN
CY
KIT
S | V
arious
115
3 HOUR EMERGENCY KITS | SUMMARY
3 HOUR EMERGENCY KITSSummary and British Kitemark™ Certification
BSI Kitemark™ Certification
The BSI Kitemark™ is a quality mark owned and operated by BSI. It is one of the most recognised symbols of quality and safety and offers true value to consumers, businesses and procurement practices.
With UKAS certification - benefits include risk reduction, increased customer satisfaction and access to new customers around the world.
The BSI Kitemark is a conformity certification trade mark owned by BSI and was originally only used in the UK, but it is now recognized throughout the world as a mark of quality.
Liteplan’s products and electronic components carry the BSI Kitemark™ certification.
This Licence remains the property of The British Standards Institution and shall be returned immediately upon request.To check its validity telephone +44 (0)845 080 9000
Information and contact: BSI, Kitemark Court, Davy Avenue, Knowlhill, Milton Keynes MK5 8PP. Tel: +44 845 080 9000.BSI Assurance UK Limited, registered in England under number 7805321, at 389 Chiswick High Road, London, W4 4AL, UK.A member of the BSI Group of Companies.
No. KM 612837
First Issued: 8/10/2014 Latest Issue: 8/10/2014
Page 1 of 2
Kitemark™ Licence
This Licence remains the property of The British Standards Institution and shall be returned immediately upon request.To check its validity telephone +44 (0)845 080 9000
Information and contact: BSI, Kitemark Court, Davy Avenue, Knowlhill, Milton Keynes MK5 8PP. Tel: +44 845 080 9000.BSI Assurance UK Limited, registered in England under number 7805321, at 389 Chiswick High Road, London, W4 4AL, UK.A member of the BSI Group of Companies.
This is to certify that: Liteplan LimitedApex HouseBryant AvenueRomfordRM3 0APUnited Kingdom
Holds Kitemark Licence Number: KM 612837
In respect of:Electronic Modules This issues the right and Licence to use the Kitemark in accordance with the Kitemark Terms and Conditionsgoverning the use of the Kitemark, as may be updated from time to time by BSI Assurance UK Ltd (the"Conditions"). All defined terms in this Licence shall have the same meaning as in the Conditions.
The use of the Kitemark is authorized in respect of the Product(s) detailed on this Licence provided at or from theabove address.
For and on behalf of BSI:
First Issued: 8/10/2014 Latest Issue: 8/10/2014
Page 1 of 2
Gary Fenton, Global Assurance Director
This Licence remains the property of The British Standards Institution and shall be returned immediately upon request.To check its validity telephone +44 (0)845 080 9000
Information and contact: BSI, Kitemark Court, Davy Avenue, Knowlhill, Milton Keynes MK5 8PP. Tel: +44 845 080 9000.BSI Assurance UK Limited, registered in England under number 7805321, at 389 Chiswick High Road, London, W4 4AL, UK.A member of the BSI Group of Companies.
No. KM 612837
First Issued: 8/10/2014 Latest Issue: 8/10/2014
Page 2 of 2
Electronic controlgear for emergency lighting.
Tested to BS EN 61347-1:2008+A2:2013, BS EN 61347-2-7:2012 and BS EN 61347-2-13:2006.
Test reports: TR/14/406 and TR/14/559 (8136377)
Model number Input V/Hz Output V / I LED capability Duration
NED/3 230/240V AC 50Hz 6-60V 320-43mA 2 – 20 in series 3 Hrs maintained
NED/3/80 230/240V AC 50Hz 6-80V 320-25mA 2 – 30 in series 3 Hrs maintained
116
3 H
OU
R E
MERG
EN
CY
KIT
S | B
ritish K
itemark
™ C
ertifi
cation
www.netled.co.uk | 01223 851505
Part Number Description Driver Power Colour Temp. Lumens Dimmable
NET-19-33-01 3 Hour Emergency Kit for LED T5/T8 Tubes N/A 5W N/A N/A N/A
NET-19-33-03 3 Hour Emergency Kit for LED Panel Lights + LED Downlights N/A 5W N/A N/A N/A
NET-19-33-09 3 Hour Emergency Kit for LED NCF Luminaires + LED Batten Luminaire N/A 5W N/A N/A N/A
NET-19-33-15 DALI Addressable 3 Hour Emergency Kit for LED Panels + Downlights N/A 5W N/A N/A N/A
116
117
CA
SE S
TU
DY
| Hertfo
rdsh
ire C
onstab
ulary
CASE STUDY | HERTFORDSHIRE CONSTABULARY
NET LED Lighting | Our Service, Our People, Your Choice
Hertfordshire Constabulary
“We installed over 800 LED tubes in police premises during 2010 and 2011. As well as seeing a reduction in electricity
consumption of over 60%, the LED tubes have been virtually maintenance free.”
- Mike Carvell, Building Services Manager,
Hertfordshire Constabulary, 2010
THE PROJECT
Hertfordshire Constabulary’s policing style and organisation is designed to provide a modern, flexible force and an effective policing service for Hertfordshire.
Consistent with these objectives is the desire to be environmentally responsible, so during 2010 and 2011 Herts Constabulary installed hundreds of 600mm (2ft) LED Tubes in place of the old fluorescents.
THE SOLUTION
During 2010, 802 600mm (2ft) LED Tubes running at 8W were installed in police premises. These replaced 18W fluorescents strip lights.
The LED Tubes do not require starters or ballasts (which also consume power) thereby making additional energy savings and removing components which would otherwise require ongoing maintenance.
THE RESULT The savings in electricity consumption achieved are over 60%, giving a corresponding carbon dioxide reduction. Furthermore, the LED Tubes last over three times longer than the fluorescents, saving Herts Constabulary lamp replacement maintenance costs.
The longer life of the LED Tubes also means less actual waste disposal of failed tubes, starters and ballasts, which has significant environmental benefits as fluorescents contain the toxic chemicals mercury and lead, as well as being made of glass.
CASE STUDY
117
118
MEET T
HE M
AN
UFA
CTU
RER
SMEET THE MANUFACTURERS
www.netled.co.uk | 01223 851505
Meet the ManufacturersNET LED Lighting distributes on behalf of quality manufacturers based in the United Kingdom, Germany, the Netherlands, Taiwan, and China.
We build relationships with manufacturers we trust to deliver products of consistently high quality.
118
We ensure the manufacturers we choose to work with adhere to processes certified by independent bodies.
Find out more about our manufacturers over the next few pages.
MEET THE MANUFACTURERS | TOPPO AND PHILIPS
Toppo LightingCompany- Profile
Toppo Lighting Company Ltd. is a Shenzhen-based manufacturer specialising in the development of high quality LED lighting for commercial applications.
The company was founded in 2009. Its advanced production facilities allow it to manufacture quality products in high volume.
NET LED has been working with Toppo since 2009 and is the exclusive UK distributor of Toppo’s range of LED Panels, Tubes, Downlights, 2D Bulkheads, Batten and Linear Luminaire ranges, NCF Luminaires and Wall Packs. We work with Toppo’s skilled R&D team to produce lighting solutions that meet requirements.
Toppo’s processes are certified to ISO 9001 for quality management and ISO 14001 for environmental management. All products in the company’s range are independently accredited for CE & RoHS compliance.
Philips- Profile
Philips is a global market leader with recognised expertise in the development, manufacturing and application of innovative lighting solutions.
Founded in the Netherlands in 1891, Philips is a diversified technology company with primary divisions in the areas of electronics, healthcare and lighting.
Philips has pioneered many key breakthroughs in lighting over the past 120+ years, holding patents for a large number of the technologies used in LED lighting products.NET LED is a proud licence holder of the Philips LED Luminaires and Retrofit Bulbs Licensing Program, allowing it
to incorporate Philips-patented technologies into its commercial LED lighting products.
Recognising the quality of Philips’ manufacturing, NET LED’s manufacturers have incorporated Philips drivers into most of their best-selling products.
Products incorporating Philips Xitanium drivers can be found throughout this catalogue.
NET LED Lighting | Our Service, Our People, Your Choice119
MEET T
HE M
AN
UFA
CTU
RER
S | To
ppo an
d P
hilip
s
119
MEET THE MANUFACTURERS | LEYOND AND LITEPLAN
Leyond LightingCompany- Profile
Leyond Lighting Company Ltd. is a Shenzhen-based specialist in LED exterior high power lighting products.
Leyond was founded in 2005 as a wholly-owned subsidiary of Liyang Electronic. It is a high tech enterprise that specialises in the development and production of eco-friendly high power LED lighting.
NET LED has been working with Leyond since 2011 and is the exclusive UK distributor for the Leyond range of LED Flood Lights and LED High Bays.Leyond operates out of a 6000m2 factory with 300 employees. Its processes are accredited to ISO 9001 for quality management.Leyond’s facilities incorporate
the latest surface mount assembly equipment in environmentally controlled assembly rooms.
Product development and final test equipment includes automated ICT test equipment, Everfine Globe for photometric testing, vibration and waterproof testing equipment and dedicated optical test rooms for IES data generation.
Leyond product ranges supplied by NET LED include: Flood Lights, Slimline Flood Lights, and High Bays.
Liteplan EmergencyLighting- Profile
Liteplan Ltd. is a leading manufacturer of emergency lighting products in the United Kingdom.
NET LED has been working with Liteplan since 2011 and distributes LED Emergency Lights and 3 Hour LED Emergency Kits from the Liteplan range.
The company is accredited to ISO 9001 for quality management and is an approved member of The Lighting Industry Federation. Its products are compliant with WEEE regulations.
Liteplan’s emergency lighting specialist knowledge and NET LED’s commercial lighting expertise has resulted in
thousands of successful emergency lighting installations across the UK.
The company operates out of a bespoke 27,000 square foot factory, benefiting from the increased capacity and efficiency the facility offers.
Liteplan is a member of The Industry Committee for Emergency Lighting and The Lighting Industry Association.
Liteplan’s product ranges can be found throughout the catalogue.
www.netled.co.uk | 01223 851505 120
MEET T
HE M
AN
UFA
CTU
RER
S | Leyo
nd an
d Lite
plan
This Licence remains the property of The British Standards Institution and shall be returned immediately upon request.To check its validity telephone +44 (0)845 080 9000
Information and contact: BSI, Kitemark Court, Davy Avenue, Knowlhill, Milton Keynes MK5 8PP. Tel: +44 845 080 9000.BSI Assurance UK Limited, registered in England under number 7805321, at 389 Chiswick High Road, London, W4 4AL, UK.A member of the BSI Group of Companies.
No. KM 612837
First Issued: 8/10/2014 Latest Issue: 8/10/2014
Page 1 of 2
Kitemark™ Licence
This Licence remains the property of The British Standards Institution and shall be returned immediately upon request.To check its validity telephone +44 (0)845 080 9000
Information and contact: BSI, Kitemark Court, Davy Avenue, Knowlhill, Milton Keynes MK5 8PP. Tel: +44 845 080 9000.BSI Assurance UK Limited, registered in England under number 7805321, at 389 Chiswick High Road, London, W4 4AL, UK.A member of the BSI Group of Companies.
This is to certify that: Liteplan LimitedApex HouseBryant AvenueRomfordRM3 0APUnited Kingdom
Holds Kitemark Licence Number: KM 612837
In respect of:Electronic Modules This issues the right and Licence to use the Kitemark in accordance with the Kitemark Terms and Conditionsgoverning the use of the Kitemark, as may be updated from time to time by BSI Assurance UK Ltd (the"Conditions"). All defined terms in this Licence shall have the same meaning as in the Conditions.
The use of the Kitemark is authorized in respect of the Product(s) detailed on this Licence provided at or from theabove address.
For and on behalf of BSI:
First Issued: 8/10/2014 Latest Issue: 8/10/2014
Page 1 of 2
Gary Fenton, Global Assurance Director
120
Fitzgerald Lighting- Profile
Fitzgerald Lighting is a UK-based manufacturer of Pre-Wired Battens, Cat2 and Non-Corrosive fittings.
Founded in Cornwall in 2009, Fitzgerald and NET LED began working together in 2012 under an approved distribution agreement. Fitzgerald’s Pre-Wired Luminaires are compatible with the full range of T5 and T8 LED Tubes distributed by NET LED.
Fitzgerald employs a flexible, experienced team of manufacturing professionals. The company’s processes are certified to ISO 9001 for quality management.
All products are CE marked and meet the requirements of BS/EN60598.
Fitzgerald’s Pre-Wired Luminaires can be found on page 39.
MEET T
HE M
AN
UFA
CTU
RER
S | M
ean
Well an
d Fitzge
rald
MEET THE MANUFACTURERS | MEAN WELL AND FITZGERALD
Mean Well- Profile
Mean Well is an internationally renowned manufacturer of switched power supplies.
The company was established in 1982 and currently operates out of Europe, the USA, China and Taiwan. As a response to the demands for intelligent control of LED lighting in the commercial market, NET LED supplies DALI and 1-10V Drivers manufactured by Mean Well.
Mean Well’s processes are accredited to ISO 9001 and ISO 14001 for quality and environmental management respectively. The company employs rigid integrated procedures to ensure the highest standards of quality in product and service.
All products manufactured by Mean Well comply with certificates UL8750, ENEC EN61347-2-13, and EN62384 of lighting regulations.
NET LED Lighting | Our Service, Our People, Your Choice
3736WEB www.fitzlight.co.uk email [email protected] 01208 79524 FAX 01208 72832 Photometric data is available on-line for DiaLux and ReLux
L I G H T PA C KFLUORESCENT LUMINAIRES
For general, industrial and commercial application
Optional Lamp Type (Add suffix to order code)
/X: Supplied excluding lamps
/840: Supplied with colour 840 lamps /835: Supplied with colour 835 lamps
Optional Features (Add suffix to order code)
/FTB: Fused terminal block
For Accessories please see pages 44-49
Order Codes Including Lamps T5 Tube - HF as standardOrder Code Watt A B C KgLP114/HF/840** 1 x 14 574 330 - 2.4LP121/HF/840** 1 x 21 874 630 300 2.4LP124/HF/840** 1 x 24 574 330 - 2.4LP128/HF/840 1 x 28 1174 930 600 2.4LP135/HF/840 1 x 35 1474 1230 600 2.4LP139/HF/840 1 x 39 874 630 300 2.4LP149/HF/840 1 x 49 1474 1230 600 2.4LP154/HF/840 1 x 54 1174 930 600 2.4LP180/HF/840 1 x 80 1474 1230 600 2.4
T8 Tube - SS as standardOrder Code Watt A B C KgLP118/840** 1 x 18 612 - - 1.3 LP130/840** 1 x 30 917 - - 1.4LP136/840** 1 x 36 1221 966 600 1.5LP158/840 1 x 58 1521 1266 600 1.9LP170/840 1 x 70 1784 1530 600 2.3
T8 Tube - Low Power Factor onlyOrder Code Watt A B C KgLPF118/840* 1 x 18 612 - - 1.3LPF130/840* 1 x 30 917 - - 1.4LPF136/840* 1 x 36 1221 966 600 1.5LPF158/840* 1 x 58 1521 1266 600 1.9
T12 Tube - SS only Order Code Watt A B C Kg
LP1100/840* 1 x 100 2394 2140 1200 4.9 * Not available with an emergency option.
** Only available with remote emergency.
Product Specification
• Supplied with colour 840 lamps
• Manufactured from mild steel
• Resilient white finish
• Polycarbonate lampholders
Lamp Options
T5: 16mm Fluorescent TubesT8: 26mm Fluorescent TubesT12: 38mm Fluorescent Tubes
A wide range of high quality British made
battens, all supplied with lamps.
Attractively designed single lamp batten
luminaire specifically for T5 and T8
lamps.
Applications:
• Schools• Offices• Kitchens• Workshops• Corridors
Gear options /HF: High Frequency /AD: 1-10V Analogue Dimming /SD: Retractive Switch Dimming /DD: DSI Digital Dimming /DL: DALI Addressable Dimming Emergency options /M3: 3hr Maintained Emergency
Designed and manufactured to comply with EN 60598 and are CE certified.
36W, 58W,
& 70W
916
77 278612
180
18W
30W
93
59
127 331 343
T5 LIGHTPACK T8 LIGHTPACK
74
59
14/24W ONLY
36W, 58W,
& 70WT8
916
77 278612
180
18W
30W127 331 343
C
T5 LIGHTPACK TWIN T8 LIGHTPACK TWIN
AB
C
AB
C
AB
C
AB
14/24W ONLY
9178
59 105
LIGHTPACK T8
Lightpack Part Code Formula:
Product Number Lamp / Gear / Optional / Lamp / Emergency Family of Lamps Watts Option Feature Type Option
LP 1 58 HF - X M3
InstallationExposed T 6Plasterboard 6Metal Pan 6Surface 4Suspended 4
ENERGY SAVINGS
We have a range of lighting controls that can offer motion and daylight sensing. This intelligence can either be integral to the fitting or located
remotely. For more information and a free ‘Return On Investment’
report, your local Fitzgerald contact would be delighted to assist.
121
MEET T
HE M
AN
UFA
CTU
RER
S | Z
ano C
ontro
ls and S
CHU
CH
MEET THE MANUFACTURERS | ZANO CONTROLS AND SCHUCH
www.netled.co.uk | 01223 851505
Zano Controls- Profile
Zano Controls was founded in 2010 to supply dimming controls for LED lighting.
Zano Controls provide a `1-10V Dimmer for the range of 22W, 36W, 40W and 60W LED Panel Lights, and 22W LED Downlights.
Zano Controls’ processes are certified to ISO 9001 certification for quality manufacturing.
Zano’s lighting control dimmer switch units can be found in the Lighting Controls section on page 101.
SCHUCH- Profile
NET LED Lighting is a UK distributor of the full explosion-proof and protected range by the German specialist applications lighting manufacturer SCHUCH.
SCHUCH hazardous area fittings available through NET LED include Zones 1 and 2 protected LED flood lights, high bays, emergency lights and batten luminaires.
With more than 100 years experience solving problems related to lighting hazardous areas, SCHUCH is now manufacturing fittings that incorporate energy saving LED technology.
SCHUCH products can be found in the dedicated SCHUCH product catalogue.
122
REGIONAL SALES MANAGERS
1. SCOTLAND | 07825 302485Internal Sales Support:01223 851085
2. NORTH EAST | 07867 301747Internal Sales Support:01223 851081
3. NORTH WEST | 07825 302237Internal Sales Support:01223 851089
4. EAST ANGLIA | 07798 633008Internal Sales Support:01223 851088
5. NORTH LONDON | 07789 960168Internal Sales Support:01223 851080
6. SOUTH EAST | 07833 463279Internal Sales Support:01223 851083
7. MIDLANDS | 07949 370178Internal Sales Support:01223 851087
8. M4 CORRIDOR | 07495 463886Internal Sales Support:01223 851084
9. SOUTH WEST | 07825 302244Internal Sales Support:01223 851082
10. NORTHERN IRELAND / ISLE OF MAN 07796 148825Internal Sales Support:01223 851090
11. SWANSEA / TRURO POSTCODES07920 102886Internal Sales Support:01223 851086
Our team of Regional Sales Managers & Internal Sales Support work hard to take care of your needs, ensuring you always have the information, products and marketing materials you need.
HEAD OFFICE
NET LED LIMITEDEvolution Business ParkMilton RoadImpingtonCambridgeCB24 9NG
T: 01223 851505F: 01223 851506E: [email protected]
Who to contact
NET LED Lighting | Our Service, Our People, Your Choice
WHO TO CONTACT | FIND YOUR REGIONAL SALES MANAGER
WH
O T
O C
ON
TACT | Fin
d yo
ur R
egio
nal S
ales M
anage
r
123
WHO TO CONTACT | FIND YOUR REGIONAL SALES MANAGER
www.netled.co.uk | 01223 851505
KWZE
AL
B
BA
BB
BH
BL
BN
BRBS
AB
EEC
EH
EN
EX
KAKA
KT
KYKY
L M
ME
MK
ML
N
PAPAPAPA
PAPA
PAPAPAPA
PE
PHPH
PL
PO
PR
SA
SE
SG
SK
SL
SM
SN
SOSP
SS
ST
SW
SY
G
W
BT
HS
HS
IV
DD
FK
TD
NEDG
DHSR
CA
DLTS
LAYOHG
BD
HU
IM
FY LS
WF
DN
LNS
HX
HD
NG
OLWN
WA
CH CWLL
LL
DETF
WSWV LE
NR
IPCB
COCM
NNCV
DY
WRLDHR
GLNP
OX
CF
HPLU
RG
TA
TR
TQ
DT
GU RH TNCT
WDHA
UB
IG
RM
DA
CR
TW
NWWC
1
23
4
8
7
9
11
6
5
10
11
WH
O T
O C
ON
TACT | Fin
d yo
ur R
egio
nal S
ales M
anage
r
124
LED TECHNOLOGYA light-emitting diode (LED) is an electronic light source. The LED was introduced as a practical electronic component in 1962. All early devices emitted low-intensity red light, but modern LEDs are available across the visible, ultraviolet and infra red wavelengths, with very high brightness.
LEDs are based on the semiconductor diode. When the diode is forward biased (switched on), electrons are able to recombine with holes and energy is released in the form of light. This effect is called electroluminescence and the colour of the light is determined by the energy gap of the semiconductor. The LED is small in area (less than 1mm²) with integrated optical components to shape its radiation pattern and assist in reflection.
OPERATING LIFELEDs are solid-state devices so are not subject to catastrophic failure when operated within design parameters. LEDs are designed to operate upwards of 50,000 hours at 25°C ambient temperatures. Operating life is characterised by the degradation of LED intensity over time. Quality LEDs should provide a useful light output > 50,000 hours. After which ongoing degradation will result in the end of its useful life, although the LED will continue to operate as output diminishes for up to 100,000 hours.
LED lighting advantages over traditional
light sources include:
Lower energy consumption: typically 65%
energy saving - lower running costs & lower CO2
emissions/carbon footprint
Longer life: typically 50,000 hour life
expectancy - reduced maintenance & recycling cost
savings
Environmentally friendly: no toxic
chemicals (mercury, lead) - recycling benefits
Safer for surroundings: no UV - good for
health, works of art & fabrics
User friendly: can be cycled OFF and ON
immediately at full brightness
Financial benefit: quality LED lighting qualifies
for the Government Enhanced Capital Allowance
scheme
NET LED Lighting | Our Service, Our People, Your Choice
FEATURES & BENEFITS | LED LIGHTING
Features & Benefits of LED Lighting
FEATU
RES &
BEN
EFIT
S | LE
D Ligh
ting
125
FLUORESCENT VS. LEDThe benefits of upgrading your existing lighting to LED lighting are numerous, and include reduced running costs, longer product life and improved eco friendliness.The main benefits of switching to LED lighting are:
> An LED product typically reduces your electricity running costs by 65% when compared with a standard fluorescent tube, with no loss of light;
> An LED product lasts over three times longer so additional savings are achieved in capital, labour and administration costs normally associated with regularly having to replace lamps, starters and ballasts;
> No ultra violet (UV) light is produced. UV light is not only potentially hazardous to people, but it damages materials, fading colours in fabrics and artwork;
> LED tubes contain no mercury or lead typically found in fluorescents, so they can be more easily and safely recycled with all the associated costs and environmental savings achieved.
Against the installed cost of £68.16 the LED tube will have paid for itself 4 times over during its lifetime.
COST OF OWNERSHIPFluorescent versus LED Tubes
Fluorescent Tube58W 1500mm (5ft) T8
NET LED Tube22W 1500mm (5ft) T8
Prices – Tube £4.50 £38.16
– Ballast £6.00 £0.00
– Starter £0.60 £0.00
Number of replacements – Tube 3 1
– Ballast 1 0
– Starter 3 0
Material costs (approx. end user cost) £21.30 £38.16
Labour costs to replace tube (£30 per tube) £90.00 £30.00
Total cost of installation £111.30 £68.16
Tube Power Consumption 58 22
Ballast Power Consumption 8 0
Total Power Consumption (W) 66 22
Life Expectancy (hours) 20,000 50,000
Total Power Consumption at 50,000 hrs (kWh) 3300 1100
Total Electricity Running Costs (10.0 p/kWh) £363.00 £121.00
Total Cost of Ownership based on 50,000 [email protected]/kWh £474.30 £189.16
LED Tube Saves £285.14
COST OF OWNERSHIPWhen comparing the costs of fluorescent strip lights with LED tubes, it is important to take into account the total cost of ownership - not just the prices of the respective tubes, as you are not comparing like-for-like. This can be done by considering the total costs of installation and maintenance, and the total running costs which when combined give the total cost of ownership and hence the true savings which can be achieved by installing LED tubes. LED tubes will typically last three times longer than the equivalent fluorescents and do not require control gear (ballasts and starters) which are needed to light fluorescents. During the life of one LED tube, it is likely that you would have to use three fluorescents, three starters, and replace the ballast once. These hardware costs, plus the labour costs to replace them, will normally far exceed the cost of installing an LED tube, even before any running costs are considered.
FEATURES & BENEFITS | LED LIGHTING
www.netled.co.uk | 01223 851505
FEATU
RES &
BEN
EFIT
S | LE
D Ligh
ting
126
PRO
DU
CT D
IRECTO
RY
Key features, part numbers and page numbers of our full range
Product directory
Part Number Description Driver Power Colour Temp. Lumens Page
NET-11-03-05 Edge-Lit LED Panel Light Bi-Colour UGR<19 600x600mm Philips 40W 4500K or 5500K 3600lm 9
NET-11-03-25 Egde-Lit LED Panel Light 500x500mm Philips 22W 4500K 2000lm 10
NET-11-03-01 Edge-Lit LED Panel Light 600x600mm Philips 40W 4500K 3600lm 11
NET-11-03-03 Edge-Lit LED Panel Light 600x600mm Philips 40W 5500K 3600lm 11
NET-11-03-11 Edge-Lit LED Panel Light 1200x300mm Philips 40W 4500K 3600lm 12
NET-11-03-13 Edge-Lit LED Panel Light 1200x300mm Philips 40W 5500K 3600lm 12
NET-11-03-21 Edge-Lit LED Panel Light 1200x600mm Lifud 60W 4500K 5600lm 13
NET-11-03-23 Edge-Lit LED Panel Light 1200x600mm Lifud 60W 5500K 5600lm 13
NET-11-03-53 Back-Lit LED Panel Light 600x600mm Philips 32W 4500K 2800lm 14
NET-11-11-21 LED Grid Luminaire 600x600mm Philips 36W 5500K 2650lm 15
NET-11-03-39 Surface Mount Box for 600x600mm Panel Light N/A N/A N/A N/A 16
NET-11-03-41 Surface Mount Box for 1200x300mm Panel Light N/A N/A N/A N/A 16
NET-11-03-43 Surface Mount Box for 1200x600mm Panel Light N/A N/A N/A N/A 16
NET-11-03-31 Suspension Kit - 4 Stud N/A N/A N/A N/A 16
NET-19-33-03 3 Hour Emergency Kit for LED Panel Lights & Grid Luminaires N/A 5W N/A N/A 16
NET-19-33-15 DALI Addressable 3 Hour Emergency Kit for LED Panels + Downlights N/A 5W N/A N/A 16
NET-29-43-05 DALI LED Dimming Driver for 22W LED Panel Light Mean Well 25W N/A N/A 17
NET-29-43-01 DALI LED Dimming Driver for 32W/40W LED Panel Light Mean Well 40W N/A N/A 17
NET-29-43-07 DALI LED Dimming Driver for 60W LED Panel Light Mean Well 60W N/A N/A 17
NET-29-43-09 1-10V Dimming Driver for 22W LED Panel Light Mean Well 25W N/A N/A 18
NET-29-43-03 1-10V Dimming Driver for 32W/40W LED Panel Light Mean Well 40W N/A N/A 18
NET-29-43-11 1-10V Dimming Driver for 60W LED Panel Light Mean Well 60W N/A N/A 18
NET-31-43-05 Dimmer for 1-10V Dimming Drivers N/A N/A N/A N/A 18
LED Panel Lights
LED NCF Luminaires
Part Number Description Driver Power Colour Temp. Lumens Page
NET-11-11-01 LED NCF Luminaire 600mm (2ft) Philips 22W 5500K 2100lm 23
NET-11-11-03 LED NCF Luminaire 1200mm (4ft) Philips 40W 5500K 3300lm 24
NET-11-11-05 LED NCF Luminaire 1500mm (5ft) Philips 45W 5500K 3850lm 25
NET-11-11-07 LED NCF Luminaire 1500mm (5ft) Lifud 60W 5500K 5200lm 26
NET-11-16-01 IP65 Cable Gland (for use with LED NCF Luminaires) N/A N/A N/A N/A 27
NET-19-33-09 3 Hour Emergency Kit for LED NCF Luminaires N/A 5W N/A N/A 27
LED Batten Luminaires
Part Number Description Driver Power Colour Temp. Lumens Page
NET-11-11-63 LED Batten Luminaire 1500mm (5ft) Philips 40W 5500K 3000lm 31
NET LED Lighting | Our Service, Our People, Your Choice127
LED Linear Luminaires
Part Number Description Driver Power Colour Temp. Lumens Page
NET-11-11-71 LED Linear Luminaire 1200mm (4ft) Lifud 18W 5500K 2100lm 35
NET-11-11-73 LED Linear Luminaire 1500mm (5ft) Lifud 22W 5500K 2500lm 36
NET-11-11-75 LED Linear Luminaire 1500mm (5ft) Lifud 30W 5500K 3100lm 37
NET-11-11-77 LED Linear Luminaire 1800mm (6ft) Lifud 32W 5500K 3200lm 38
PRO
DU
CT D
IRECTO
RY
Luminaires Pre-Wired for LED
www.netled.co.uk | 01223 851505
Part Number Description Driver Power Colour Temp. Lumens 45Page
NET-27-13-01 T5 Single Batten 1449mm (5ft) N/A N/A N/A N/A 49
NET-27-13-03 T5 Twin Batten 1499mm (5ft) N/A N/A N/A N/A 49
NET-27-13-05 T8 Single Batten 1200mm (4ft) N/A N/A N/A N/A 49
NET-27-13-09 T8 Single Batten 1500mm (5ft) N/A N/A N/A N/A 49
NET-27-13-13 T8 Single Batten 1800mm (6ft) N/A N/A N/A N/A 49
NET-27-13-17 T8 Twin Batten 1200mm (4ft) N/A N/A N/A N/A 49
NET-27-13-21 T8 Twin Batten 1500mm (5ft) N/A N/A N/A N/A 49
NET-27-13-25 T8 Twin Batten 1800mm (6ft) N/A N/A N/A N/A 49
NET-27-13-07 T8 Single Batten Diffuser 1200mm (4ft) N/A N/A N/A N/A 49
NET-27-13-11 T8 Single Batten Diffuser 1500mm (5ft) N/A N/A N/A N/A 49
NET-27-13-15 T8 Single Batten Diffuser 1800mm (6ft) N/A N/A N/A N/A 49
NET-27-13-27 T8 Twin Batten Diffuser 1200mm (4ft) N/A N/A N/A N/A 49
NET-27-13-19 T8 Twin Batten Diffuser 1500mm (5ft) N/A N/A N/A N/A 49
NET-27-13-23 T8 Twin Batten Diffuser 1800mm (6ft) N/A N/A N/A N/A 49
NET-27-14-01 T8 Twin Cat 2 1200mm (4ft) N/A N/A N/A N/A 50
NET-27-14-03 T8 Twin Cat 2 1500mm (5ft) N/A N/A N/A N/A 50
NET-27-14-05 T8 Tri Cat 2 600mm (2ft) N/A N/A N/A N/A 50
NET-27-14-07 T8 Quad Cat 2 600mm (2ft) N/A N/A N/A N/A 50
NET-27-15-15 T5 Single NCF 1449mm (5ft) N/A N/A N/A N/A 51
NET-27-15-17 T5 Twin NCF 1499mm (5ft) N/A N/A N/A N/A 51
NET-27-15-01 T8 Single NCF 1200mm (4ft) N/A N/A N/A N/A 51
NET-27-15-03 T8 Single NCF 1500mm (5ft) N/A N/A N/A N/A 51
NET-27-15-05 T8 Single NCF 1800mm (6ft) N/A N/A N/A N/A 51
NET-27-15-07 T8 Twin NCF 1200mm (4ft) N/A N/A N/A N/A 51
NET-27-15-09 T8 Twin NCF 1500mm (5ft) N/A N/A N/A N/A 51
NET-27-15-11 T8 Twin NCF 1800mm (6ft) N/A N/A N/A N/A 51
NET-27-15-13 Stainless Steel Clips N/A N/A N/A N/A 51
NET-11-15-09 No Gear NCF Luminaire 1500mm (5ft) N/A N/A N/A N/A 52
LED T5/T8 Tubes
Part Number Description Driver Power Colour Temp. Lumens Page
NET-11-01-03 LED T5 Tube 1ft (288mm) Lifud 6W 5500K 500lm 43
NET-11-01-05 LED T5 Tube 2ft (549mm) Lifud 10W 5500K 900lm 43
NET-11-01-07 LED T5 Tube 3ft (849mm) Lifud 12W 5500K 1000lm 43
NET-11-01-09 LED T5 Tube 4ft (1148mm) Lifud 15W 5500K 1450lm 43
NET-11-01-11 LED T5 Tube 5ft (1449mm) Lifud 20W 5500K 1850lm 43
NET-11-02-01 LED T8 Tube 2ft (600mm) Lifud 10W 5500K 1050lm 44
NET-11-02-02 LED T8 Tube 3ft (900mm) Lifud 12W 5500K 1250lm 44
NET-11-02-11 LED T8 Tube 4ft (1200mm) Lifud 18W 3000K 1900lm 44
NET-11-02-03 LED T8 Tube 4ft (1200mm) Lifud 18W 5500K 1900lm 44
NET-11-02-13 LED T8 Tube 5ft (1500mm) Lifud 22W 3000K 2200lm 44
NET-11-02-04 LED T8 Tube 5ft (1500mm) Lifud 22W 5500K 2200lm 44
NET-11-02-15 LED T8 Tube 6ft (1800mm) Lifud 32W 3000K 2900lm 44
NET-11-02-05 LED T8 Tube 6ft (1800mm) Lifud 32W 5500K 2900lm 44
LED Glass T8 Tubes
Part Number Description Driver Power Colour Temp. Lumens Page
NET-11-02-21 LED Glass T8 Tube 600mm (2ft) Lifud 10W 5500K 900lm 45
NET-11-02-23 LED Glass T8 Tube 1200mm (4ft) Lifud 18W 5500K 1700lm 45
NET-11-02-24 LED Glass T8 Tube 1500mm (5ft) Lifud 22W 5500K 2000lm 45
PRODUCT DIRECTORY
128
PRO
DU
CT D
IRECTO
RY
NET LED Lighting | Our Service, Our People, Your Choice
Part Number Description Driver Power Colour Temp. Lumens Page
NET-11-11-31 LED Wall Pack Philips 40W 3000K 3000lm 81
PRODUCT DIRECTORY
129
LED 2D Bulkheads
Part Number Description Driver Power Colour Temp. Lumens Page
NET-11-05-13 LED Downlight 120-125mm cut-out (4”) Lifud 8W 4500K 750lm 55
NET-11-05-09 LED Downlight 170-175mm cut-out (6”) Lifud 18W 4500K 1550lm 56
NET-11-05-11 LED Downlight 200-205mm cut-out (8”) Lifud 22W 4500K 1850lm 57
NET-19-33-05 3 Hour Emergency Kit for LED Downlight N/A N/A N/A N/A 58
NET-19-33-15 DALI Addressable 3 Hour Emergency Kit for Downlights N/A 5W N/A N/A N/A
NET-29-43-05 DALI LED Dimming Driver for 22W LED Downlight Mean Well 25W N/A N/A 58
NET-29-43-09 1-10V Dimming Driver for 22W LED Downlight Mean Well 25W N/A N/A 58
NET-31-43-05 1-10V Dimmer for 1-10V Dimming Driver N/A N/A N/A N/A 58
LED Downlights
LED Emergency Lights
Part Number Description Driver Power Colour Temp. Lumens Page
NET-19-08-01 For use in Specific Locations Liteplan 3W 6000K 155lm 63
NET-19-08-03 For use along Escape Routes Liteplan 3W 6000K 155lm 64
NET-19-08-05 For use in Open Areas Liteplan 3W 6000K 155lm 65
Part Number Description Driver Power Colour Temp. Lumens Page
NET-11-06-11 Gear Tray Standard Lifud 16W 4500K 1700lm 71
NET-11-06-13 Gear Tray Emergency Lifud 16W 4500K 1700lm 71
NET-11-06-15 Gear Tray 10% Microwave Motion Sensor Lifud 16W 4500K 1700lm 71
NET-11-06-29 Gear Tray 10% Microwave Motion Sensor Emergency Lifud 16W 4500K 1700lm 71
NET-11-06-45 Gear Tray 0% Microwave Motion Sensor Lifud 16W 4500K 1700lm 71
NET-11-06-47 Gear Tray 0% Microwave Motion Sensor Emergency Lifud 16W 4500K 1700lm 71
LED Gear Trays
LED IP65 2D Bulkhead Housings
Part Number Description Driver Power Colour Temp. Lumens Page
NET-11-06-11 IP65 Rated Housing - Polycarbonate N/A N/A N/A N/A 77
NET-11-06-49 IP65 Rated Housing - Aluminium N/A N/A N/A N/A 77
NET-11-06-25 Half Moon Cover for NET-11-06-10 N/A N/A N/A N/A 77
Part Number Description Driver Power Colour Temp. Lumens Page
NET-11-06-17 2D Bulkhead Standard Lifud 16W 4500K 1100lm 69
NET-11-06-19 2D Bulkhead Emergency Lifud 16W 4500K 1100lm 69
NET-11-06-21 2D Bulkhead 10% Microwave Motion Sensor Lifud 16W 4500K 1100lm 69
NET-11-06-27 2D Bulkhead 10% Microwave Motion Sensor Emergency Lifud 16W 4500K 1100lm 69
NET-11-06-41 2D Bulkhead 0% Microwave Motion Sensor Lifud 16W 4500K 1100lm 69
NET-11-06-43 2D Bulkhead 0% Microwave Motion Sensor Emergency Lifud 16W 4500K 1100lm 69
NET-11-06-06 Chrome Ring Accessory for 2D Bulkhead N/A N/A N/A N/A 69
LED IP65 2D Bulkhead Housings need to be purchased in conjunction with LED Gear Trays.
LED Wall Packs
PRO
DU
CT D
IRECTO
RY
www.netled.co.uk | 01223 851505
LED High Power Flood Lights
Part Number Description Driver Power Colour Temp. Lumens Page
NET-15-04-11 LED Flood Light Philips 100W 6000K 8300lm 85
NET-15-04-13 LED Flood Light Philips 150W 6000K 13000lm 86
NET-15-04-15 LED Flood Light Philips 200W 6000K 16800lm 87
NET-15-04-17 LED Flood Light Philips 250W 6000K 22000lm 88
Part Number Description Driver Power Colour Temp. Lumens Page
NET-15-04-31 LED Slimline Flood Light Leyond 10W 6000K 650lm 93
NET-15-04-33 LED Slimline Flood Light Leyond 30W 6000K 2100lm 94
NET-15-04-35 LED Slimline Flood Light Leyond 50W 6000K 3500lm 95
NET-15-04-37 LED Slimline Flood Light Leyond 80W 6000K 5600lm 96
NET-15-04-47 LED Slimline Flood Light Leyond 100W 6000K 7300lm 97
NET-15-04-39 PIR Sensor for LED Slimline Flood Light N/A N/A N/A N/A 98
LED Slimline Flood Lights
LED High Bays
Part Number Description Driver Power Colour Temp. Lumens Page
NET-15-12-01 LED High Bay Mean Well 100W 5000K 10500lm 101
NET-15-12-05 LED High Bay Mean Well 150W 5000K 15200lm 102
NET-15-12-07 LED High Bay Mean Well 200W 5000K 17000lm 103
LED Lighting Controls
Part Number Description Driver Power Colour Temp. Lumens Page
NET-29-43-05 DALI LED Dimming Driver for 22W LED Panel Light Mean Well 25W N/A N/A 109
NET-29-43-01 DALI LED Dimming Driver for 32W/40W LED Panel Light Mean Well 40W N/A N/A 109
NET-29-43-07 DALI LED Dimming Driver for 60W LED Panel Light Mean Well 60W N/A N/A 109
NET-29-43-09 1-10V Dimming Driver for 22W LED Panel Light Mean Well 25W N/A N/A 110
NET-29-43-03 1-10V Dimming Driver for 32W/40W LED Panel Light Mean Well 40W N/A N/A 110
NET-29-43-11 1-10V Dimming Driver for 60W LED Panel Light Mean Well 60W N/A N/A 110
NET-31-43-05 Dimmer for 1-10V Dimming Drivers N/A N/A N/A N/A 110
NET-11-43-07 Philips LED Driver Philips 21W N/A N/A 111
NET-11-43-09 Philips LED Driver Philips 32W N/A N/A 111
NET-11-43-11 Philips LED Driver Philips 44W N/A N/A 111
NET-11-43-13 Lifud LED Driver Lifud 60W N/A N/A 111
LED 3 Hour Emergency Kits
Part Number Description Driver Power Colour Temp. Lumens Page
NET-19-33-01 3 Hour Emergency Kit for LED T5/T8 Tubes N/A 5W N/A N/A 115
NET-19-33-03 3 Hour Emergency Kit for LED Panel Lights + LED Downlights N/A 5W N/A N/A 115
NET-19-33-09 3 Hour Emergency Kit for LED NCF Luminaires + LED Batten Luminaire N/A 5W N/A N/A 115
NET-19-33-15 DALI Addressable 3 Hour Emergency Kit for LED Panels + Downlights N/A 5W N/A N/A 115
PRODUCT DIRECTORY
130
LED TECHNICAL GLOSSARY
Ampere (Amp) – The unit for measuring rate of flow of electrical current: Current (Amps) = Power (Watts) / Voltage (Volts)
Brightness – Often used incorrectly with respect to illumination as a synonym for luminous flux. An objective measurement of the visible power of a light source. The term is correctly used when describing screen brightness in a display or television.
Colour Rendering Index (CRI) – A measure of the degree of colour shift objects undergo when illuminated by the light source as compared with those same objects when illuminated by a reference source of comparable colour temperature. The reference source has a CRI of 100.
Colour temperature – The description used to describe the effect of heating an object until it glows incandescently. The emitted radiation, and apparent colour, changes proportional to the temperature; easily envisioned when considering hot metal in a forge that glows red, then orange, and then white as the temperature increases.
Delivered Light – The amount of light a lighting fixture or lighting installation delivers to a target area or task surface, measured in footcandles (fc) or lux (lx).
Diffuser – An object with irregularities on a surface causing scattered light diffusions.
Digital Addressable Lighting Interface (DALI) – A digital communications protocol for controlling and dimming lighting fixtures, originally developed in Europe.
Efficacy – The light output of a light source divided by the total electrical power input to that source, expressed in lumens per watt (lm/W).
Flux / Luminous Flux – Luminous flux is the measure of the perceived power of light produced by the LED, adjusted to reflect the varying sensitivity of the human eye to different wavelengths of light.
Forward voltage – LEDs are current driven devices. If an external current is passed through the device, a forward voltage will be developed across the diode.
Heat Sink – A part of the thermal system that conducts or convects heat away from sensitive components, such as LEDs and electronics.
High Power LED – A high power LED, sometimes referred to as a power LED, is one that is driven at a current of 350 mA or higher.
Illuminance – The intensity of light falling on a surface area. If the area is measured in square feet, the unit of illuminance is footcandles (fc). If measured in square metres, the unit of illuminance is lux (lx).
Kelvin Temperature – Term and symbol (K) used to indicate the comparative colour appearance of a light source when compared to a theoretical blackbody. Yellowish incandescent lamps are 3000K.
LED Chip (Chip) – The light producing semiconductor device that may or may not be incorporated into an LED.
LED Driver – An electronic circuit that converts input power into a current source — a source in which current remains constant despite fluctuations in voltage. An LED driver protects LEDs from normal voltage fluctuations, overvoltages, and voltage spikes.
Light Emitting Diode (LED) – A Light Emitting Diode (LED) is a solid-state semiconductor device that converts electrical energy directly into light. At its most basic level, the semiconductor is comprised of two regions. The p-region contains positive electrical charges while the n-region contains negative electrical charges. When voltage is applied and current begins to flow, the electrons move across the n region into the p region. The process of an electron moving through the p-n junction releases energy. The dispersion of this energy produces photons with visible wavelengths.
Lumen (lm) – The international (SI) unit of luminous flux or quantity of light and equals the amount of light that is spread over a square foot of surface by one candle power when all parts of the surface are exactly one foot from the light source.
Lumen Output – The total lumens emitted of a light source, system, or solution.
Luminaire – A lighting fixture complete with installed lamps and other accessories.
Lux (lx) – The international (SI) unit of illuminance, or luminous flux incident on a unit area, frequently defined as one lumen per square meter (lm/m²).
Power Factor – The active power divided by the apparent power (i.e., product of the rms input voltage and rms input current of a driver).
SMDs – Surface-mount LEDs.
Ultraviolet (UV) – Electromagnetic radiation with wavelength shorter than that of visible light
Volt – The term used to describe the electrical potential difference between oppositely charged conductors.
Watt – The unit of electrical power as used by an electrical device during its operation. Many lamps come with rating in watts to indicate their power consumption.
NET LED Lighting | Our Service, Our People, Your Choice
TECHNICAL GLOSSARY | LED LIGHTING
LED
TECH
NIC
AL G
LO
SSA
RY
| LED Ligh
ting
131
Fish Brothers Dealerships
“As our business grows we have become increasingly conscious of the effect our operations have on the environment. NET LED provided quality products and great service throughout.”
- Sean Donovan, Group Health & Safety and Quality Manager, Fish Brothers Group
Reigate & Banstead Borough Council
“We achieved a payback of around 2 years equating to a saving in annual electricity costs of £13,119 per annum and a reduction in our carbon footprint of 67 tonnes CO2 and greatly improved the lighting effect in these public areas.”
- Raymond Dill, Environmental Initiatives Officer, Reigate & Banstead Borough Council
Hertfordshire Constabulary
“We installed over 800 NET LED Tubes in police premises during 2010 and 2011 and as well as seeing a reduction in electricity consumption of over 60%, the LED Tubes have been virtually maintenance free.”
- Mike Carvell, Building Services Manager, Hertfordshire Constabulary
clients’ comments...
NET LED Ltd.
Evolution Business Park
Milton Road, Impington
Cambridge
CB24 9NG
T: 01223 851505
F: 01223 851506
W: www.netled.co.uk
AUTHORISED WHOLESALER
In keeping with the company’s policy of continued development, NET LED reserves the right to change specifications without notice. The information contained herein is representative only and does not form part of any contract.