the coldframe assembly instructions · 2020. 9. 8. · screw kit screw s-steel csk pozi 4.2mm x...
TRANSCRIPT
www.gabrielash.com
01829 271888
the coldframe assembly instructions
Screw Kit
Screw s-steel csk pozi 4.2mm x 65mm SC027
Screw s-steel panhead pozi 4.2mm x 25mm SC125
Screw s-steel csk pozi 4.2mm x 45mm SC025
Washer brass surface cup No. 8 WA301
Washer s-steel spring M6 WA600
Washer s-steel formg M6 x 18mm WA002
Nut s-steel wingnut M6 NU200
Bolt s-steel coachbolt M6 x 90mm BL427
1. Fix Stay Locating Block and Stays
I. II. III.
IV. V.
SC025 x 2
BL427
WA002
NU200
WA002
WA600
2. Fix Side Panels and Back Panel
I. II.
III. IV.
SC027 &
WA301 x 2
3. Fix Hinge Pieces to Back Panel and Lid at Pre-marked Pilot Holes
SC125x 2
SC125x 2
4. Fit Lid. Only when the lid is at the correct angle will the hinges slot together and hinge as normal.
SC125x 2
5. Additional Instructions for Grand Coldframe
The stays and locating blocks are
fitted as shown below A drainage channel is fixed through the pre marked
holes in the front and rear panel top rails.
The lids are handed – left hand and right hand. It is VITAL
that they are fitted correctly.
The underside of the left hand lid has the corner machined
away (rebated) along its right hand edge. The right hand lid
is rebated on the underside of its left hand edge.
6. Fit Lids
Left Lid
Right Lid
Rebates