pz2r x 4 pozi reduced drive 3rd hand & little hand

693

Decorative

Knobs, Pulls &

Hinges

Surface M

aterialsBoards

& Panels

Adhesives, A

brasives &

LubricantsCatches &

LocksD

rawer Slides,

Systems &

Ergo

Fasteners &

Fittings

Hinges,

Mounting

Plates &

Bumpers

Kitchen &

Bath Accessories

LightingO

ther Functional H

ardware

Safety Products

Shelving, Closets &

Tracks

Tools &M

achinesW

ood Finishes

Wood

Products

Product offerings and descriptions are subject to change without notice. *Indicates lead-time item. Please contact Customer Care or your Strategic Account Manager for more information.

PZ2R x 4 Pozi Reduced Drive

• Pozi Drive #2 Reduced Screwdriver for adjusting hinges.

• The hardened tip allows for a longer life.

Item # Length Drive Pack Qty.QS12359* 4.000” Pz#2 1

SQ2 X 1” Square Insert Impact Drive Bit

• Impact drive bits designed to take the pounding of the impact drive tools

Item # Drive Qty./Pack Length

QS11778V5* Sq#2 10 1.000”

3rd Hand

• 70 lb. capacity• 5’-12’ extension• 360° articulating top and bottom feet• Ball detents for positive locking• Neoprene grip• Dust barrier clip included

Item #FC3HAND5HD*

3rd Hand & Little Hand Accessories

• 3rd Hand Carrying Bag holds four 3rd Hands plus accessories

• UniversalFoot comes standard on all Little Hands and makes the 3rd Hand free standing

• LaserMount enables you to quickly clamp a mounting device onto the 3rd Hand pole and position your laser wherever you need it

• LaserMount is easy to install and its rotational L-bracket allows the beam to be placed at any angle

Item # Description

FCUNIVERFOOT* UniversalFoot

Little Hand

• 16.5"-22.8" extension• UniversalFOOT comes standard on all Little Hands• Can brace or clamp whenever and wherever you

might need an extra hand

Item #FC3HAND157HD*

SpeedClip

• Easily clips over pants or belt• Ideal for holding a tape measure• Features built in pencil sharpener

Item #FCSPEEDCLIP*

Crown Molding Clip

• Heavy Duty ABS is Sturdy and durable• Easy to install and remove

Item #FCCROWNMOLD*

694

ProCarpenter Tape Measure

• Built-in erasable note pad and pencil sharpener

• Heavy-duty 1” blade with 4 rivet construction

• Shock-resistant rubber casing• Dual thumb and finger locks• Easy belt clip• High-contrast black on white scale

Item # Description

FCPMS16* 16’ Metric/Standard

FCPSS16* 16’ Lefty/Righty

FCPS16* 16’ Standard

Custom Color Punch KitEdgebanding

• Punch out exactly the number of Fastcaps needed

• Ideal for matching custom colors• Kit includes: flush mount drill bit,

roll of 1” SpeedTape, 3 dies (9/16”, 11/16”, and 3/8”), and hard-shell carrying case

Item # DescriptionFCHOLEPNCHKIT* Hole Punch Kit

FCHOLEPUNCH* Hole Punch (Single)

Euro Door Stop

• Designed to use with European cabinets

• Easy to install

Item #FCEURODRSTOP*

Micro Flush Cut Trimmers

• Rounded flush side cutting surface• Allows you to get into tight spots

when removing brad nails or small slivers

Item #FCPLIERMICRO*

Power Shears

• The Power Shears are great for cutting wood veneer and laminate

• Small and compact, yet razor sharp to cut through the toughest material like canvas and burlap, and even aluminum

Item #FCPOWERSHEARS*

Flush Cut Timmers

• The Flush Cut Trimmer enables you to trim edgebanding and brad nails flush to the surface

• Works great with standard wood and PVC edgebanding

Item #FCPLIERSFLUSH*

Heavy Duty Flush Cut Trimmers

• Heavy Duty trimmers cut nails flush

Item #FCPLRHVYDTYFC*

695

Decorative

Knobs, Pulls &

Hinges

Surface M

aterialsBoards

& Panels

Adhesives, A

brasives &

LubricantsCatches &

LocksD

rawer Slides,

Systems &

Ergo

Fasteners &

Fittings

Hinges,

Mounting

Plates &

Bumpers

Kitchen &

Bath Accessories

LightingO

ther Functional H

ardware

Safety Products

Shelving, Closets &

Tracks

Tools &M

achinesW

ood Finishes

Wood

Products


Electrical Trim Ring

• Cleans up electrical cutouts in the back of cabinets

• Can be trimmed to specific return depths

• Easy to install• Available in custom colors

Item # Desc. Depth Width Height Color

FCETRDOUBLE* Double Outlet

1[¼]” 6.25” 6.25” White

SkinsGloves

• Lightweight & tough seamless design• Ultra thin, allowing you to feel fine design• Sang, puncture and abrasion resistant• Superior grip• Machine washable and dries quickly

Item # Size

FCWORKGLVLRG* Large

FCWORKGLVMED* Medium

FastBreak Melamine Sander

• Great for any width• Sand 2 edges at once• Storage for extra sandpaper• FastBreakXL sands up to 2-3/8” and

down to 3/4” designed for entry doors and larger panels

Item # DescriptionFCFASTBREAK* Melamine Sander

FCFB180GRIT10* 180 Grit Sandpaper

FCFB80GRiT10* 80 Grit Sandpaper

Saw Hood

• Great for miter saws• Easy to set up and eliminates

billowing dust • Protective cover when working

outside in inclement weather

Item # DescriptionFCSAWHOODWH* Miter Saw Hood

DoorMag3rd Hand

• The DoorMag creates in and out access though any dust barrier wall

• Made from neodymium magnets that keep plastic tight to poles

Item #FC3HDOORMAG*

Outlet Stamp

• Accurately marks the back of cabinets for electrical outlets

• Plugs into outlet receptacle and marks four precise marks, making it easy to see where to cut

• Marks for both single and double gang boxes

• Includes five makers

Item #FCOUTLETSTAMP*

696

AccuScribe Pro

• Maintains a consistent scribe offset, staying parallel to the object surface

• Non-rocking bottom• Ideal for scribing the trim strip on

kitchen cabinets, architectural moldings, countertops, splash guards, tile, and flooring

• Features precision pencil sharpener• Removable compass point with storage clip• Articulating pencil head

Item #FCACCUSCRIBPR*

Upper Hand System Kit

• Kit includes: 2 Upper Hands, 4 6” x 6” Universal feet and carrying case

Item #FC3HDSYSTEMKT*

Plasti-Cut® File

• Designed specifically for maximum performance on decorative laminates

• Extra sharpness and hardness ensures a long life of fast, clean filing

• Excellent for edge finishing other plastics

• Select the mill for smoothest finish and the Fast® for fast cutting, coarse finish

Item # Size Description

PLPC-10F 10" Fast®

PLPC-10M 10" Mill

PLPC10DX* 10” Duplex

PLPC-12F* 12" Fast®

PLPC-12M 12" Mill

PLPC-14F 14" Fast®

PLPC-14M 14" Mill

Laminate File

• First quality, general purpose American-made file for laminate

Item # Size Description Case Qty.

PLSM12MC* 12" MIll 6

PLSM14MC* 14" Mill 6

File Card

• Ideal for cleaning all types of files (not recommended for Plasti-Cut® files)

• Tempered steel bristles are angled forward and spaced to remove stubborn clogging and restore cutting capacity

• For best results, pull the card across the file surface in a direction parallel to the grooves

• The file card with brush features a brush with stiff plastic bristles on the other side that removes most of the dust and filings (for stubborn clogs flip to card side)

Item # Size Description

PLFC-87* 8" Without Brush

PLCB-88* 10" With Brush

All-Purpose Black Maxi-Sharp File

• Black finish process results in durable, sharper teeth that last longer and improve filing efficiency

• 10" L x 31/32" W x 3/16" thick• Bastard cut on one side with finer teeth on the other side• 12/box

Item # DescriptionSI7318800 Standard

SI78188100 Best

697

Decorative

Knobs, Pulls &

Hinges

Surface M

aterialsBoards

& Panels

Adhesives, A

brasives &

LubricantsCatches &

LocksD

rawer Slides,

Systems &

Ergo

Fasteners &

Fittings

Hinges,

Mounting

Plates &

Bumpers

Kitchen &

Bath Accessories

LightingO

ther Functional H

ardware

Safety Products

Shelving, Closets &

Tracks

Tools &M

achinesW

ood Finishes

Wood

Products


Round Straight File

• Ideal for work in corners and holes• Double cut• 6" x 1/8"• 12/box

Item #SI8418150*

Multi-Kut® Flat

• Features a diamond pattern “double chip breaker” allowing for fast stock removal while leaving a smooth finish

• Single cut, course tooth

Item # Weight Box Qty.SI73244000 4lbs, 8oz 6 per box

Hand Laminate Slitter

• Manual hand slitter can be used on high pressure laminates and veneers

• Can be utilized as a stationary tool as well as a portable one

• Bracket enables user to have both hands on the material being slit

• Replacement cutters are sold 2/set• Cutting thickness is micro adjusted and

width is easily set• Portable and lightweight• Easy to use and requires no electricity• Maximum material thickness: 1/16"• Minimum material width: 3/8"• Maximum material width: 3"• Cuts up to 4-5/16"

Item # Description

VTCO15E* Slitter

VTTK78V* Bracket

VTT78B* Replacement Cutters

Gem Orbital Sander

• Sands, polishes, and finishes wood, solid surfaces, concrete countertops and metal

• Faster than hand motion, this GEM is completely stable, with no tendency to "get away" from the operator

• Heavy-duty ball bearing capacitator motor

• No gears to grind or strip out• No carbon brushes or armature

winding to burn out• Exclusive removable shaft system• 1,700 RPM at 110v• Includes 11” dia. drive pad

Item # Drive Pad Qty.GMBWHL 11” dia. 1

GMC515CH 11” dia. 1

Gem Dust Shroud

• The shroud easily retro-fits any Gem sander (item no. GMBWHL) and operates with any standard shop vacuum

• Includes adapter to accommodate 1-1/4” vacuum hose

• Ideal for onsite installs; dust is no longer an issue

Item # Outlet PipeGMS112* 1[½]”

Screwdriver Insert BitPhillips

• Bosch reinforced screwdriver bits are designed to handle tough torque applications

• Made of the highest quality S2 tool steel for durability

• Proven sub-zero tempering process gives bits long life• Made in USA under ISO9001 standards

Item # Desc. Overall Length

Hardness

VE27021 BIT PHIL INS 000-P2 1” Extra

698

Di-Count™ Adjustable Countersink Bit

• Carbide-tipped• 2-wing• Accepts drills from 3/32" through 9/32"• Wood screw sizes #2 through #18

Item # Bevel Angle Cutting Dia. Cutting Length

Overall Length

AN20200* 45° [7/16]" - [19/32]" [7/16]" 1[¼]"

Brad Point Boring Bit70mm L, 10mm x 30mm Shank

• For drill presses only - not for use in portable drills or routers

Item # Cutting Dia. Cutting LengthAN204008* 8mm 35mm

Hinge Boring Bit57mm L, 10mm Shank, 2-Wing with Spurs

• Application: boring machines (10mm shank) and drill presses (3/8" shank)

Item # Cutting Dia.

AN203351 35mm

AN203401* 40mm

AN203355* 35mm

Metric Boring Bit

• Boring machines for shelving hardware, etc.• Use with adapters or brushings

Item # Cutting Diameter Shank Diameter OverallAN463003* 3mm 3mm 55mm

Laminate Flush TrimmersWith Euro™ Square Bearing Guide

• Designed according to specifications with a slight taper allowing for adjustment up or down on the work edge to finish off the edge with a smooth and burr free cut

• Manufactured with a non-stick Teflon® which won't mark your edge so it can be wiped clean easily

• Glue won’t stick to bearing• Beveled cutter means little or no hand filing• Will not scratch high gloss laminates• Beveled cutter can be resharpened• Replacement bearings; for bit #47148 use bearing # SQB102

Item # Radius Cutting Length

Shank Dia. Overall Length

AN47148 ¾” ⅝” ¼” 2[⅜]”

Self-Centering Vix Bit

• Saves hours of time accurately drilling holes for all hardware using screws

• All vix bits and vix-hex heads are sold in complete units that include drill guide, bit, and spring

• Precision built• Drills wood, metal, plastics, and more• Adjustable for depth

Item # Description SizeVK03 #3 Vix Bit [5/64]" dia. (for #2 & 3

screws)

VK05 #5 Vix Bit [7/64]" dia. (for #5 & 6 screws)

VK05HEX* #5 Vix-Hex Head [7/64]" dia.

VK09* #9 Vix Bit [9/64]" dia. (for #8, 9 & 10 screws)

VK09HEX* #9 Vix-Hex Head [9/64]" dia.

VK564* High Speed Bit for VK03 [5/64]"

VK764 High Speed Bit for VK05 [7/64]"

VK964* High Speed Bit for VK09 [9/64]"

699

Decorative

Knobs, Pulls &

Hinges

Surface M

aterialsBoards

& Panels

Adhesives, A

brasives &

LubricantsCatches &

LocksD

rawer Slides,

Systems &

Ergo

Fasteners &

Fittings

Hinges,

Mounting

Plates &

Bumpers

Kitchen &

Bath Accessories

LightingO

ther Functional H

ardware

Safety Products

Shelving, Closets &

Tracks

Tools &M

achinesW

ood Finishes

Wood

Products


Super Plunge™ Router Bit1/2" Shank, 2 Flute

• Specially made plunge bit with tungsten carbide center tips

• Allows for faster and easier plunging and mortising and will stay sharper longer

• 18,000 maximum RPM for AN41452• 16,000 maximum RPM for AN41453

Item # Cutting Diameter Cutting Length Overall LengthAN41422* [½]" 1[½]' 3[⅛]"

Brad Point Boring Bit57mm L, 10mm x 27mm Shank

• For drill presses only - do not use in portable drills or routers

Item # Cutting Dia. Cutting Length

AN201005* 5mm 27mm

AN301005* 5mm 27mm

AN301008* 8mm 27mm

Solid Carbide Straight Plunge Router Bit

• • Designed for fast cutting natural exotic woods and wood composites

• Solid carbide for longer tool life and easy service

Item # CuttingDia.

CuttingLength

ShankDia.

Overall Length

AN43700* [1/8]" [7/16]" [1/4]" 2"

Carbide Tipped Counterbore Bit

• Counterbore/drill for face frame machines• Precision ground carbide-tipped counterbore

for splinter-free cutting• Will fit Evans, Ritter, Unique, Marcon and Norfield

face frame machines• Wide web design for superior strength• Replaceable HSS fishtail drills• Non-slip surface treatment for positive clamping

Item # Cutting Diameter

Counterbore Overall Length

ShankDiameter

AN424000* [⅜]" .136" 4[½]" [⅜]"

Solid Carbide Straight Plunge Router Bit

• Designed for fast cutting natural exotic woods and wood composites

• Solid carbide for longer tool life and easy service

• 2 Flute


CuttingLength

ShankDiameter

Overall Length

AN43824* [¼]" 1" [¼]" 2[½]"

Straight Plunge Router Bit1/4" Shank, Single Flute

• Single flute allows for faster feed rates, greater chip clearance and maximum stock removal

Item # Cutting Dia.

CuttingLength

Overall Length

AN45106* [¼]" [¾]" 2"

700

Straight Plunge Router Bit1/4" Shank, 2 Flute

• Solid carbide cutting edges are featured on AN45190, AN45200, AN45201, and AN45202

• Due to extreme diameter, AN45190 and AN45200 are not guaranteed, and AN45211 is not guaranteed due to its extreme length

Item # CuttingDia.

CuttingLength

Overall Length

AN45190* [1/16]" [3/16]" 1[⅝]"

AN45200* [⅛]" [7/16]" 2"

AN45202* [3/16]" [7/16]" 2"

AN45204* [¼]" [½]" 2"

AN45208* [¼]" [¾]" 2"

AN45210* [¼]" 1" 2[¼]"

AN45224* [½]" [¾]" 1[¾]"

AN45230* [¾]" [¾]" 2"

Straight Plunge Router Bit 1/2" Shank, 2 Flute

• 2 flute allows for greater balance and fine finish

• Solid carbide cutting edge featured on the AN45408• Due to extreme length, AN45415 and AN45427

are not guaranteed • 20,000 maximum RPM for AN45447• 22,000 maximum RPM for AN45449• 18,000 maximum RPM for AN45452• 12,000 maximum RPM for AN45480

Item # CuttingDia.

CuttingLength

Overall Length

AN45412* [5/16]" 1" 2[¾]"

AN45413* [⅜]" [¾]" 2[½]"

AN45415* [⅜]" 1[¼]" 3"

AN45418* [½]" 1" 2[⅝]"

AN45420* [½]" 1[¼]" 2[⅞]"

AN45422* [½]" 1[½]" 3[⅛]"

AN45426 [1/2]" 2" 4[¼]"

AN45434* [⅝]" 1[½]" 3[⅛]"

AN45433* [⅝]" 2" 3[¾]"

AN45435* [21/32]" 1[¼]" 2[⅞]"

AN45438* [¾]" 1" 2[⅝]"

AN45440 [¾]" 1[¼]" 2[⅞]"

AN45448* 1" 1[¼]" 2[⅞]"

Straight Plunge Router Bit1/2" Shank, Single Flute

• Single flute allows for faster feed rates, greater chip clearance and maximum stock removal

Item # Cutting Dia.

CuttingLength

Overall Length

AN45304* [¼]" [¾]" 2[½]"

AN45302* [⅜]" 1" 2[¾]"

AN45312* [½]" 2" 4[¼]"

Flush Trim Plunge Router BitWith Upper Ball Bearing, 2 Flute

• Very useful for template and pattern routing where the template is on top of the workpiece

• Ball bearing guide rides against the template for an exact duplication

• If used on a router table, the pattern will be on the bottom, below the workpiece

• 20,000 maximum RPM for AN45467 and AN45468

Item # CuttingDia.

CuttingLength

ShankDia.

Overall Length

AN45460 [½]" 1" [¼]" 2[½]"

AN45460S [½]" [¼]" [¼]" 1[⅝]"

AN45462* [⅝]" 1" [¼]" 2[¾]"

AN45463 [¾]" 1" [½]" 3"

AN45465 [¾]" 1[¾]" [½]" 3[¾]"

AN45468* 1[⅛]" 1[½]" [½]" 3[½]"

Mortising Router Bit 1/4" Shank, 2 Flute

• A proper mortising bit should have a large gullet between the two flutes

Item # Cutting Dia.

Cutting Length

OverallLength

AN45504* [¾]" [¾]" 2"

701

Decorative

Knobs, Pulls &

Hinges

Surface M

aterialsBoards

& Panels

Adhesives, A

brasives &

LubricantsCatches &

LocksD

rawer Slides,

Systems &

Ergo

Fasteners &

Fittings

Hinges,

Mounting

Plates &

Bumpers

Kitchen &

Bath Accessories

LightingO

ther Functional H

ardware

Safety Products

Shelving, Closets &

Tracks

Tools &M

achinesW

ood Finishes

Wood

Products


Panel Pilot Router Bit Single Flute

• Designed for the mobile home and RV industries• Ideal for fast cut out work

Item # Cutting Dia.

Cutting Length

Shank Dia.

OverallLength

AN45506* [¼]" [¾]" [¼]" 2[½]"

Up-Shear Design Bottom Cleaning Router Bit1/2" Shank, 2 Flute

• Used for cutting or milling flat-bottom grooves or dados

• Up-shear design provides excellent finish and chip removal


Cutting Length

Overall Length

AN45564* 1" [7/16]" 2[½]"

90° V-Groove Router BitWith Upper Ball Bearings, 2 Flute

• Very useful for template and pattern routing where the template is on top of the workpiece

• Ball bearing guide rides against the template for an exact duplication

• If used on a router table, the pattern will be on the bottom, below the workpiece

• For decorative purposes, not intended for 'miter-folding', etc

• Use replacement bearing AN47701 and replacement collar AN47724


Cutting Length

Shank Diameter

Overall Length

AN45750* [½]" [½]" [¼]" 2"

Dovetail Router Bit2 Flute

• The 14º dovetail bit is designed for use with common half-blind dovetail jigs, as well as with Omnijig, Incra™, and Leigh jigs

Item # Cutting Dia.

Cutting Length

Shank Dia.

Overall Length

AN45804* [½]" [½]” [¼]" 1[¾]”

AN45806* [½]" [½]” [½]" 2[⅜]"

Core Box Router Bit2 Flute

• Use core box pattern for fluting columns and other architectural design

Item # Radius Cutting Dia.

Cutting Length

Shank Dia.

Overall Length

AN45900* [1/16]" [⅛]" [⅜]" [¼]" 1[¾]"

AN45902* [3/32]" [3/16]" [½]" [¼]" 1[¾]"

AN45906* [3/16]" [⅜]" [¼]" [¼]" 1[½]"

AN45908* [3/16]" [⅜]" [¼]" [½]" 2"

AN45912* [¼]" [½]" [⅜]" [½]" 2[⅛]"

AN45914* [5/16]" [⅝]" [7/16]" [¼]" 1[⅝]"

AN45916* [5/16]" [⅝]" [7/16]" [½]" 2"

AN45918* [⅜]" [¾]" [7/16]" [¼]" 1[¾]"

AN45924* [½]" 1" [⅝]" [¼]" 1[¾]"

702

Bowl & Tray Router Bit

• Ball Bearing Guide• 1/2” Shank• 2 Flute• Carbide Tipped

Item # Radius CuttingDiameter

CuttingLength

OverallLength

AN45990* [¼]" [¾]" [⅝]" 2[⅝]"

Spiral Plunge Router BitSolid Carbide, 2 Flute

• Spiral bits produce faster, cleaner cuts in hardwoods, plastics, Corian® and other brands of solid surface materials, etc

• ’Up-cut’ design expels chips away from the workpiece, allowing for deeper and easier mortising

• ’Down-cut’ design expels chips away from the router• Premium micro-grain carbide, increased clearance

geometry and razor-sharp cutting edges with polished flutes provides a superior finish and longer tool life

Item # CuttingDia.

CuttingLength

ShankDia.

OverallLength

AN46102* [¼]" [¾]" [¼]" 2[½]"

AN46106 [½]" 1[¼]" [½]" 3"

AN46204* [⅜]" 1[¼]" [½]" 3"

AN46206* [½]" 1[¼]" [½]" 3"

AN46207* [½]" 1[⅝]" [½]" 3[½]"

Flush Trim Router BitWith Ball Bearing Guide, 2 Flute

• For closer inside corner cutting, AN47090 and AN47092 have a 1/4" diameter; bearings not guaranteed due to size

Item # CuttingDia.

Cutting Length

ShankDia.

OverallLength

AN47090 [¼]" [½]" [¼]" 2[¼]"

AN47092 [¼]" 1" [¼]" 2[½]"

AN47100 [⅜]" 1" [¼]" 2[⅝]"

AN47102 [⅜]" [½]" [¼]" 2[⅛]"

AN47104 [½]" 1" [¼]" 2[⅝]"

AN47106 [½]" [½]" [¼]" 2[¼]"

AN47108 [½]" 1" [½]" 3[¼]"

AN47110* [½]" [½]" [½]" 2[¾]"

Compression Spiral Router BitSolid Carbide, 2 Flute

• Designed for CNC applications requiring high feed rates and a clean finish

• Particularly suitable for double-sided melamine or laminated material

• Higher quality finish than the single flute

Item # CuttingDia.

Cutting Length

ShankDia.

OverallLength

AN46190* [½]" 1[⅝]" [½]" 3[½]"

Dynabit™ Laminate Trim Router BitWith Ball Bearing Guide, 2 Flute

• Down-shear helix laminate trim bits for an excellent finish, especially in difficult materials such as melamine

• Not recommended for use in a router table

Item # Type CuttingDia.

CuttingLength

ShankDia.

OverallLength

AN47105* Flush [½]" 1" [¼]" 2[⅝]"

AN47180 Flush Helix [⅝]" [⅝]" [¼]" 2"

AN47184* 15° Bevel [¾]" [⅜]" [¼]" 2"

703

Decorative

Knobs, Pulls &

Hinges

Surface M

aterialsBoards

& Panels

Adhesives, A

brasives &

LubricantsCatches &

LocksD

rawer Slides,

Systems &

Ergo

Fasteners &

Fittings

Hinges,

Mounting

Plates &

Bumpers

Kitchen &

Bath Accessories

LightingO

ther Functional H

ardware

Safety Products

Shelving, Closets &

Tracks

Tools &M

achinesW

ood Finishes

Wood

Products


Flush Trim Router BitWith Ball Bearing Guide, 3 Flute

• Standard replacement bearing (.500" dia.), use AN47706

• Undersized bearing (.492" dia.), use AN47715: for use after re-sharpening

Item # CuttingDia.

CuttingLength

Shank Dia.

OverallLength

AN47114 [½]" 1" [¼]" 2[⅝]"

AN47116* [½]" [½]" [¼]" 2"

AN47118* [½]" 1" [½]" 3"

Extra Long Flush Trim Router BitWith Ball Bearing Guide, 3 Flute



Item # Cutting Dia. CuttingLength

Shank Dia. OverallLength

AN47128* [½]" 1[½]" [½]" 3[⅞]"

Extra Long Flush Trim Router BitWith Ball Bearing Guide, 2 Flute



Item # Cutting Dia.

Cutting Length

Shank Dia.

OverallLength

AN47124 [½]" 1[½]" [½]" 3[⅞]"

AN47126* [½]" 2" [½]" 4[¼]"

Supertrim™ Flush Trim Router BitWith Ball Bearing Guide, 2 Flute

• Exceptional speed and super-fine finish• Furnished with steel bearing AN47714• Do not use down-shear in a router table

Item # Shear Cutting Dia.

CuttingLength

ShankDia.

OverallLength

AN47130* 3° [¾]" 1[½]" [½]" 3[⅞]"

AN47138* 3° [¾]" 2" [½]" 4[¼]"

No-File™ Router BitWith Ball Bearing Guide, 2 Flute

• Eliminates hand filing of laminates that normally follows trimming

• Specially designed to flush trim the laminate and "break" the sharp edge all in one pass

• For laminates .025-.038 thick, use AN47154• For laminates .042-.052 thick,

use AN47150 or AN47152• Use replacement bearing AN47704

Item # CuttingDia.

CuttingLength

Radius ShankDia.

OverallLength

AN47150 [½]" [⅜]" 0.059" [¼]" 1[⅞]"

AN47152* [½]" [⅜]" 0.059" [½]" 2[⅛]"

AN47154* [½]" [⅜]" .015" [¼]" 1[⅞]"

704

Router Bit Ultra-Glide™ Ball Bearing Guide

• Ultra-Glide bearing assemblies feature satin-smooth Delrin® sleeves

• Delrin® is an industrial synthetic plastic material similar to nylon and will leave no marks on the material being cut

• Applications include solid-surface materials such as Gibraltar®, SSV®, Corian®, Surell® & Fountainhead®; Plexiglas® & other clear acrylics; and plastic laminates

• Not recommended for regular wood applications due to a higher wear factor

• New Teflon® dust shields included with AN47709, AN47725, AN47726, and AN47731

Item # Hole Dia. Overall Dia. TaperAN47709* [¼]" [¾]" 0

AN47726* [¼]" [⅞]" 10°

AN47731* [¼]" [⅞]" 10°Bevel Trim Router BitWith Ball Bearing Guide, 2 Flute

• For closer inside corner cutting, AN47206 has a 3/8" diameter bearing

Item # Bevel CuttingDia.

CuttingLength

ShankDia.

Overall Length

AN47200* 15° [⅝]" [9/32]” [¼]" 1[⅞]"

AN47202* 25° [23/32]" [9/32]” [¼]" 1[⅞]"

AN47206* 25° [¾]" [7/16]" [¼]" 1[⅞]"

Overhang Trim Router BitWith Ball Bearing Guide, 2 Flute

• Used for preliminary laminate trimming, leaving a small overhang

• Reduces chipping of material caused by excessive feed-rate or vibration

• Final pass can be achieved using a standard trim bit

• Use replacement bearing AN47718

Item # CuttingDia.

CuttingLength

ShankDia.

Overall Length

Overhang

AN47192* [½]" [½]" [¼]" 2" [1/16]"

Bevel Trim Router BitWith Ball Bearing Guide, 3 Flute

• 3 flute configuration produces a very smooth cut• Solid construction reduces vibration


CuttingLength

Shank Dia.

Overall Length

AN47300 23° [15/16]" [7/16]" [¼]" 1[⅞]"

AN47302* 7° [¾]" [7/16]" [¼]" 2"

Cove Router Bit With Ball Bearing Guide, 2 Flute

• The classic building blocks for many molding profiles• Use alone or in combination with beads and fillets• 18,000 maximum RPM for AN49120

Item # Radius CuttingDia.

CuttingLength

Shank Dia.

OverallLength

AN49118* [½]" 1[⅜]" [¾]" [½]" 2[½]"

705

Decorative

Knobs, Pulls &

Hinges

Surface M

aterialsBoards

& Panels

Adhesives, A

brasives &

LubricantsCatches &

LocksD

rawer Slides,

Systems &

Ergo

Fasteners &

Fittings

Hinges,

Mounting

Plates &

Bumpers

Kitchen &

Bath Accessories

LightingO

ther Functional H

ardware

Safety Products

Shelving, Closets &

Tracks

Tools &M

achinesW

ood Finishes

Wood

Products


Router Bit Steel Ball Bearing Guide

• Bearings are double steel-shielded for extra rigidity and to inhibit dust

• A special high-performance, high-temperature grease is used for maximum life

• Solvents should not be used to clean ball bearings, as this will deteriorate the special grease

Item # Hole Dia. Overall Dia. ThicknessAN47723* [⅛]" [¼]" [7/64]"

AN47702* [3/16]" [⅜]" [⅛]"

AN47706* [3/16]" [½]" [3/16]"

AN47718* [3/16]" [⅝]" [3/16]"

AN47720* [3/16]" [¾]" [9/32]"

AN47712* [¼]" [⅝]" [3/16]"

AN47714* [¼]" [¾]" [9/32]"

AN47708* [5/16]" [⅞]" [9/32]"

AN47721* [½]" [¾]" [5/32]"

Roman Ogee Router BitWith Ball Bearing Guide, 2 Flute

• The roman ogee bit, which has a convex curve coming off the bearing, produces the reverse of the ogee

• Curve starts at the top as a concave and fairs down into a convex curve


Item # CuttingDia.

Radius CuttingLength

Shank Dia.

OverallLength

AN49202* 1" [5/32]" [⅝]" [½]" 2[½]"

AN49206* 1[⅜]" [¼]" [⅞]" [½]" 2[⅝]"

Double Roman Ogee Router BitWith Ball Bearing Guide, 2 Flute


Item # CuttingDia.

Radius Cutting Length

ShankDia.

OverallLength

AN49210* 1" [5/32]" [⅝]" [½]" 2[½]"

Rabbet Router Bit With Ball Bearing Guide, 2 Flute

• A basic rabbeting bit• Switch to one of four optional ball bearing

guides to alter the width of cut• Use replacement bearings AN47706, AN47702,

AN47718, and AN47720

Item # Cutting Dia.

RabbetDepth

CuttingLength

ShankDia.

Overall Length

AN49302* 1[¼]" [⅜]" [½]" [½]" 2[⅜]"

Multi-Rabbet Router BitWith 6 Ball Bearings, 2 Flute

• Steps 1/16” increments from 1/8” cut width to 1/2” simply by switching ball bearing guides

• Six different ball bearings are provided

Item # CuttingDia.

RabbetDepth

CuttingLength

ShankDia.

OverallLength

AN49350* 1[⅜]" [⅛]”, [¼]", [5/16]", [⅜]", [7/16]", [½]"

[½]" [½]" 2[⅜]"

706

Chamfer Router BitWith Ball Bearing Guide, 2 Flute

• Use replacement bearing AN47704 for bits AN49400 and AN49402

• Use replacement bearing AN47706 for bits AN49404 and AN49406

• AN49404 will completely chamfer 3/4" material• AN49406 will completely chamfer 1" material• 18,000 maximum RPM for AN49406

Item # ChamferAngle

Cutting Dia.

CuttingLength

Shank Dia.

Overall Length

AN49400* 45° 1[¼]" [½]" [¼]" 2"

AN49402* 45° 1[¼]" [½]" [½]" 2[⅜]"

AN49404* 45° 2" [¾]" [½]" 2[½]"

Beading Router BitWith Ball Bearing Guide, 2 Flute

• Cut a quarter-round shape bounded by fillets, known as a bead, is produced in one pass

• Use replacement bearing AN47702• 14,000 maximum RPM for AN49620

and AN49621

Item # Radius Cutting Dia.

Cutting Length

Shank Dia.

OverallLength

AN49592* [1/16]" [⅝]" [5/16]" [¼]" 1[¾]"

AN49612* [⅜]" 1[¼]" [⅝]" [¼]" 2[3/16]"

AN49618* [½]" 1[½]" [¾]" [½]" 2[⅝]"

AN49620* [¾]" 2" 1" [½]" 3[1/16]"

Stagger Tooth Plunge Cut Router Bit

• Stagger tooth design gives the greater speed and stock removal of a single flute, but with the strength and balance of 2 flute tools

Item # Cutting Dia. CuttingLength

Shank Dia. Overall Length

AN51300* [¼]" 1" [¼]" 2[¼]"

Panel Pilot Router BitSolid Carbide, 1/4” Shank, Single Flute

• Ideal laminate trimming bit for high-volume production• Solid carbide and integral pilot extend life of bit

Item # Cut Cutting Dia. CuttingLength

OverallLength

AN51200 Flush [¼]" [¼]" 1[½]"

AN51202 7° [¼]" [¼]" 1[½]"

Carbide Tipped Superabbet™ Router BitWith Ball Bearing Guide, 2 Flute

• Enables rabbet cuts from flush through 3/4" in 1/16" increments

• Particularly useful when working with large stock, or when a precise rabbet depth is required

• Supplied with a 2" diameter rabbet bit, hex key, instructions and all necessary parts for 5/8" and 3/4" depth rabbets

• 22,000 maximum RPM

Item # Cutting Dia.

RabbetDepth

Cutting Length

ShankDia.

OverallLength

AN49360* 2" [⅝]", [¾]" [⅞]" [½]" 3"

707

Decorative

Knobs, Pulls &

Hinges

Surface M

aterialsBoards

& Panels

Adhesives, A

brasives &

LubricantsCatches &

LocksD

rawer Slides,

Systems &

Ergo

Fasteners &

Fittings

Hinges,

Mounting

Plates &

Bumpers

Kitchen &

Bath Accessories

LightingO

ther Functional H

ardware

Safety Products

Shelving, Closets &

Tracks

Tools &M

achinesW

ood Finishes

Wood

Products


Corner Rounding Router BitWith Ball Bearing Guide, 2 Flute

• Use replacement bearing AN47706• Due to extreme diameter and radius, AN49522,

AN49523, AN49524, AN49525, and AN49526 are not guaranteed; for longer tool life and smoother finish it is recommended to use a smaller radius bit or chamfer the material prior to using these large radius tools

• 14,000 maximum RPM for AN49519, AN49520, AN49521, and AN49522

• 10,000 maximum RPM for AN49523, AN49524, AN49525, AN49526


CuttingLength

ShankDia.

OverallLength

AN49492* [1/16]" [⅝]" [5/16]" [¼]" 1[¾]"

AN49494* [1/16]" [⅝]" [5/16]" [½]" 2[¼]"

AN49496* [⅛]" [¾]" [⅜]" [¼]" 2"

AN49498* [⅛]" [¾]" [⅜]" [½]" 2[5/16]"

AN49499* [5/32]" [¾]" [⅜]" [¼]" 2"

AN49500* [3/16]" [⅞]" [½]" [¼]" 2"

AN49504* [¼]" 1" [½]" [¼]" 2"

AN49506* [¼]" 1" [½]" [½]" 2[7/16]"

AN49512* [⅜]" 1[¼]" [⅝]" [¼]" 2[3/16]"

AN49514* [⅜]" 1[¼]" [⅝]" [½]" 2[9/16]"

AN49516* [½]" 1[½]" [¾]" [¼]" 2[¼]"

AN49518* [½]" 1[½]" [¾]" [½]" 2[⅝]"

AN49520* [¾]" 2" 1" [½]" 2[⅞]"

Bullnose Radius Router Bit2 Flute

• Shape the full edge of a workpiece with a bullnose radius bit

• Ideal for shaping stair treads, window sills, table and counter edges, shelves, and making moldings

• 20,000 maximum RPM for AN51560• 10,000 maximum RPM for AN51564

Item # Bullnose Radius CuttingDia.

CuttingLength

Shank Dia.

Overall Length

AN51540* [⅛]" [5/64]" [17/32]" [½]" [¼]" 1[¾]"

AN51542* [3/16]" [7/64]" [19/32]" [½]" [¼]" 1[¾]"

AN51552* [3/16]" [7/64]" [19/32]" [½]" [½]" 2"

Bevel Trim Router Bit1/4" Shank, 2 Flute

• Cut, trim, and bevel laminates with one bit• Must be used with an edge or bearing

guide or fence


Cutting Length

Overall Length

AN51600* 22° [13/32]" [9/32]" [15/16]"

Rip & Slotting Router BitSolid Carbide, 1/4" Shank, Single Flute

• Use for cutting sheets of laminate, paneling, and other thin material

Item # CuttingDia.

Cutting Length

OverallLength

AN51708* [¼]" [5/16]" 1[½]"

Slotting Cutter Router Bit

• Use a two-wing cutter for faster feed rates, and a three-wing cutter for better cut finish

• The AN53207 5/32" size is also used for ’biscuit-joint’ cutting

Item # Kerf Cutting Dia. BoreAN53207* [5/32]" 1[⅞]" [5/16]"

708

3 Wing Slotting Cutter Assembly

• Groove edges for T-moldings, splines or biscuits, and other purposes

• Rout tongue-and-groove joinery• Includes cutter, arbor, and ball bearing guide• The AN53407 5/32" size is also used for

’biscuit-joint’ cutting

Item # Kerf Shank Dia.AN53402* [5/64]" [¼]"

AN53406* [⅛]" [¼]"

AN53407* [5/32]" [¼]"

AN534061* [⅛]" [½]"

Classical Bead & Cove Router BitWith Ball Bearing Guide, 2 Flute

• This bead-and-cove combines the two basic forms, separating them with a fillet


Item # Cutting Dia.

CuttingLength


AN54102* 1[¼]" [½]" [¼]" 2"

AN54108* 1[½]" [⅝]" [½]" 2[½]"

Ogee Fillet Router BitWith Ball Bearing Guide, 2 Flute

• This ogee pattern has a step at the end of the concave portion of the curve

• Standard 1/2" bearing AN47706 included• Optional 3/8" bearing AN47702

can be ordered separately

Item # Cutting Dia.

CuttingLength

Shank Dia.

Overall Length

AN54112* 1[⅜]" [½]" [½]" 2[½]"

AN54114* 1[⅝]" [¾]" [½]" 2[⅝]"

Classical Molding Router BitWith Ball Bearing Guide, 2 Flute

• A double quarter-round is produced by this bit• Standard 1/2" bearing AN47706 included• Optional 3/8" bearing AN47702 can

be ordered separately

Item # CuttingDia.


ShankDia.

Overall Length

AN54140* 1[⅛]" [5/32]" [½]" [½]" 2[⅜]"

Classical Cove & Bead Router BitWith Ball Bearing Guide, 2 Flute

• The positions of the bead and the cove are reversed on this series of bits, with the bead coming off the bearing

• Standard 1/2" bearing AN47706 included• Optional 3/8" bearing AN47702 can be

ordered separately

Item # CuttingDia.

CuttingLength


AN54134* 1[⅜]" [11/16]" [½]" 2[9/16]"

Corner Beading Router BitWith Ball Bearing Guide, 2 Flute

• Particularly suitable for antique reproductions and restoration projects

• For AN54160 use replacement bearing AN47706• Others use replacement bearing AN47716


Bead CuttingLength

ShankDia.

Overall Length

AN54160* [⅛]" [⅞]" [¼]" [9/16]" [¼]" 2[⅛]"

AN54164* [3/16]" 1[⅛]" [⅜]" [11/16]" [¼]" 2[¼]"

AN54166* [3/16]" 1[⅛]" [⅜]" [11/16]" [½]" 2[⅝]"

AN54170* [¼]" 1[¼]" [9/16]" ¾]" [½]" 2[⅝]"

709

Decorative

Knobs, Pulls &

Hinges

Surface M

aterialsBoards

& Panels

Adhesives, A

brasives &

LubricantsCatches &

LocksD

rawer Slides,

Systems &

Ergo

Fasteners &

Fittings

Hinges,

Mounting

Plates &

Bumpers

Kitchen &

Bath Accessories

LightingO

ther Functional H

ardware

Safety Products

Shelving, Closets &

Tracks

Tools &M

achinesW

ood Finishes

Wood

Products


Edge Molding Router BitWith Ball Bearing Guide, 2 Flute


Item # Cutting Dia.


ShankDia.

OverallLength

AN54322* 1[¼]" [5/32]" [⅞]" [½]" 2[¾]"

Drawing Line Router BitWith Ball Bearing Guide, 2 Flute


Item # CuttingDia.

BeadRadius

CuttingLength

ShankDia.

Overall Length

AN54354* 1" [5/32]" [⅞]" [½]" 2[¾]"

Carbide-Tipped Countersink BitFor Wood Screws, 2 Wing

• Includes 3" long slow-spiral drill bit• Replacement set screws (2 required) AN67092

Item # Pilot Bit CuttingDia.

CuttingLength

ShankDia.

OverallLength

AN55200* [3/32]" [⅜]" [½]" [5/16]" 1[½]"

AN55202 [⅛]" [⅜]" [½]" [5/16]" 1[⅝]"

AN55204 [9/64]" [⅜]" [½]" [5/16]" 1[⅝]"

AN55206* [5/32]" [⅜]" [½]" [5/16]" 1[⅝]"

AN55208* [11/64]" [⅜]" [½]" [5/16]" 1[⅝]"

AN55210 [3/16]" [⅜]" [½]" [⅜]" 1[¾]"

2-Piece Stile & Rail SetFor 1" Materials

• Includes two complete assemblies consisting of cutters, arbors, bearings, etc



ShankDia.

Overall Length

AN55430* Ogee 1[⅝]" [¼]" 1[1/16]" [½]" 3[5/16]"

Solid Surface Undermount Bowl Router BitWith Ultra-Glide™ Ball Bearing Assembly, 2 Flute

• Undermount Application (all tools): decorative, finished edges for ’undermount’ type bowls; among others can be used for Corian® sink & bowl #’s 802S, 804S, 805S, 809S, 810S, and 871S

• Bevel Mount Application (AN57122 only): Among others, can be used for Corian® sink & bowl #’s 804A, 805A, 830A, 852LA, 852RA, and 854RA

Item # Type Angle CuttingDia.

CuttingLength

Overall Length

AN57128 Roundover 18° 2[⅛]" 1" 3"

AN57122* Bevel 10° 1" [15/16]" 3"

AN57158* Roundover 14° 2" [11/16]" 2[½]"

AN57160* Roundover 10° 2[⅛]" 1" 2[⅞]"

AN57168* Bevel 10° 1[¼]" 1" 3"

710

Solid Surface Countertop "No-Drip" Router Bit2 Flute

• Use this bit to cut a ’no-drip’ edge for kitchen and vanity countertops

• Use with 5/16" radius corner rounding bits

Item # Material Thickness

CuttingDia.

Cutting Length

ShankDia.

Overall Length

AN57148* [¾]" 1" [½]" [½]" 2[⅛]"

Solid Surface Topmount Router BitEuropean Type, 2 Flute

• Ideal for sink cut-outs and for preparing counter-tops for topmount installation of sink or bowl

• Among others, can be used for Corian® sink & bowl #'s 830A, 852RA, 852LA and 854RA


CuttingLength

ShankDia.

OverallLength

AN57132* 15° Bevel [29/32]" [15/16]" [½]" 2[½]"

Solid Surface Corner Rounding Router BitWith Ultra-Glide™ Ball Bearing Assembly, 2 Flute

• 5/16" radius can be used with counter-top bits and for general purpose edge ornamentation

• The other sizes can be used for decorative edge treatment or with round-under bits to achieve a full 180° bullnose

• Furnished with Ultra-Glide™ non-marring Delrin® sleeved ball bearing guide

• Includes AN5000 1/8" hex key• Use replacement Ultra-Glide™

bearing assembly AN47707


CuttingLength

Shank Dia.

OverallLength

AN57150* [5/16]" 1[⅛]" [½]" [¼]" 1[⅞]"

AN57152* [5/16]" 1[⅛]" [½]" [½]" 2[¼]"

Solid Surface Bowl & Sink Trim Router BitWith Ultra-Glide™ Ball Bearing Assembly, 2 Flute

• Using a template, the first tool (over-hang) will ’rough-out’ the sink cut-out and the second tool (flush trim) will finish the cut

• Furnished with Ultra-Glide™ non-marring Delrin® sleeved ball bearing guide

• For bit AN57153 use replacement Ultra-Glide™ bearing assembly AN47726 and for bit AN57154 use bearing assembly AN47709


CuttingLength

ShankDia.

OverallLength

AN57153* [1/16]"Overhang

[¾]" 1" [½]" 3[¼]"

AN57154 Flush Trim [¾]" 1" [½]" 3[½]"

Solid Surface Long Ogee Router BitWith Ultra-Glide™ Ball Bearing Assembly, 2 Flute

• Use replacement Ultra-Glide™ bearing assembly AN47707

Item # CuttingDia.

CuttingLength

ShankDia.

OverallLength

AN57246* 1[¾]" 1[¼]" [½]" 3[¼]"

Solid Surface Chamfer Solid Router Bit With Ultra-Glide™ Ball Bearing Assembly, 2

Flute

• Use replacement Ultra-Glide™ bearing AN47707• 12,000 maximum RPM for AN57258

Item # CuttingDia.

Angle CuttingLength

ShankDia.

Overall Length

AN57220* 2" 45° [¾]" [½]" 2[⅝]"

711

Decorative

Knobs, Pulls &

Hinges

Surface M

aterialsBoards

& Panels

Adhesives, A

brasives &

LubricantsCatches &

LocksD

rawer Slides,

Systems &

Ergo

Fasteners &

Fittings

Hinges,

Mounting

Plates &

Bumpers

Kitchen &

Bath Accessories

LightingO

ther Functional H

ardware

Safety Products

Shelving, Closets &

Tracks

Tools &M

achinesW

ood Finishes

Wood

Products


Insert Flush Trim Router BitWith Ball Bearing Guide, 2 Flute

• The RC-1000 has four cutting edges per knife• The RC-1004 has two cutting edges per knife• Torx® key included• Use replacement bearing #47711 and • replacement screws #67115

Item # CuttingDia.

Cutting Length

Shank Dia.

Overall Length

ANRC1000* [¾]" [15/32]" [¼]" 2[⅛]"

Vaso Sink Router BitWith Ultra-Glide™ Ball Bearing Assembly, 2 Flute

• Undermount Application: decorative, finished edges for Corian® Vaso sinks

Item # Type Radius CuttingDia.

CuttingLength

ShankDia.

AN57170* Roundover [⅜]” [½]” 1” [½]”

Forstner Pattern Router Bit 2 Wing

• High carbon tool steel• For drilling pocket-holes, flat-bottom holes, etc.

using any 3/8" or larger portable drill or stationary drill press

• Forstner pattern bits are well known for their ability to drill clean and chip-free holes in wood

• Amana Tool® uses only the finest quality tool steel, precision machined and ground on state-of-the-art equipment

• Large gullets milled in the tool body provide exceptional chip clearance


ShankDiameter

OverallLength

ANFO095* [3/8]" [3/8]" 3[1/2]"

Hinge Boring Bit57mm L, 3/8" Shank, 2 Wing

• For use with drill presses only, right hand rotation• Economical alternative to other 35mm hinge bits

Item # Cutting Dia.ANEB351* 35mm

Heavy-Duty Carbide-Tipped Shaper CutterCorner Round, 1-1/4" Bore

• 3-wing• Counter-clockwise rotation:

wood face-down

Item # Radius CuttingDepth

Diameter

ANA30102* [3/16]" [7/16]" 4"

Insert Bevel Trim Router BitWith Ball Bearing Guide, 2 Flute

• Four cutting edges per knife• Torx® key included• Use replacement bearing AN47712

and replacement screws AN67115

Item # Bevel Cutting Dia.

CuttingLength

Shank Dia.

OverallLength

ANRC1008* 15° [13/16]" [7/16]" [¼]" 2[¼]"

ANRC1010 25° [31/23]" [7/16]" [¼]" 2[¼]"

ANAMA12* - - - - -

Allen-Type Flat Set Screw

• Case hardened• Black-oxide finish

Item # Description Use w/ Key SizeAN67092* #10-24 NC [3/32]"

712

Euro-Rip Ripping Saw Blade20° Hook

• Designed for ripping natural woods, along the grain

• Anti-kickback fingers maintain safety while limiting chip thickness, allowing for a faster, quieter cut

• Minimal feed effort is required• Cooling slots in the saw body

prevent excessive heat build-up

Item # Dia. Teeth Grind Kerf Plate BoreANRB1020* 10" 20 FT .126" 0.087 [5/8]"

General Purpose Cut-Off Saw Blade10° Hook

• For general trimming and cross-cutting of natural woods, plywood, composition material and single or double-sided plastic laminated material

Item # Dia. Teeth Grind Kerf Plate BoreAN61060130* 10" 60 TCG .126" .087" 30mm

AN61272130* 12" 72 TCG .126" .087" 30mm

AN612721* 12" 72 TCG .126" .087" 1"

Cut-Off & Cross-Cut Saw Blade10° Hook

• For general cut-off, cross-cutting and trimming of natural woods

Item # Dia. Teeth Grind Kerf Plate BoreAN610600* 10" 60 ATB .126" .087" [5/8]"

Solid Surface Saw Blade0° Hook

• Designed for cutting double-sided plastic laminate, Plexiglas® and solid-surface materials such as Dupont®, Corian®, Wilsonart®, Gibraltar® & SSV®, Fountainhead, etc

• Suitable for table saws & radial arm and similar type machines due to 0° hook angle

Item # Dia. Teeth Grind Kerf Plate BoreAN610721 10" 72 MTC .126" .095" [5/8]"

AN610721-30* 10" 72 MTC .126" .095" 30mm

AN612841* 12" 84 MTC .126" .095" 1"

Fine Cross-Cut & Cut-Off Saw Blade10° Hook

• Designed for trimming and single or double-sided veneered and plastic laminated panels

Item # Dia. Teeth Grind Kerf Plate BoreAN686401* 8" 64 TCG .118" .079" [⅝]"

AN610801* 10" 80 TCG .126" .087" [⅝]"

Double-Face Melamine & Laminate Saw Blade6° Negative Hook

• Specifically designed to cut melamine chip-free on both sides

• Features increased thickness of plate for added stability, and special ’high-ATB’ grind for extremely smooth cuts

• Easily re-sharpened

Item # Dia. Teeth Grind Kerf Plate Bore

ANMB86400* 8" 64 H-ATB .110" .087" [⅝]"

ANMB10800 10" 80 H-ATB .110" .087" [⅝]"

ANMB12960* 12" 96 H-ATB .110" .087" 1"

713

Decorative

Knobs, Pulls &

Hinges

Surface M

aterialsBoards

& Panels

Adhesives, A

brasives &

LubricantsCatches &

LocksD

rawer Slides,

Systems &

Ergo

Fasteners &

Fittings

Hinges,

Mounting

Plates &

Bumpers

Kitchen &

Bath Accessories

LightingO

ther Functional H

ardware

Safety Products

Shelving, Closets &

Tracks

Tools &M

achinesW

ood Finishes

Wood

Products


Plywood & Plastic Cutting Saw BladePositive Hook

• Blade produces quality cuts when sizing plywood and other sheet goods with a portable circular saw

• Used for cutting plastics

Item # Dia. Teeth Grind Kerf Plate BoreANPC620* 7[¼]" 40 TCG .120" .078" [⅝]" Univ.

Dado Saw Blade Set

• For cutting grooves or dados from 1/8" through 13/16"

• Set consists of two outside saw blades and four inside chippers

• Outside saw blades feature hollow- ground plates for proper clearance and alternate top bevel (ATB) grind with every sixth tooth flat ground (FT)

• 8" diameter sets have 5° negative hook angle for smoother cuts

• AN658040: 8" x 46T set for super smooth cuts in cabinet grade plywoods and melamine

Item # Dia. Teeth Grind Kerf Range BoreAN658030* 8" 24 ATB/FT [⅛]" - [13/16]" 1"

AN658040* 8" 46 ATB/FT [⅛]" - [13/16]" [⅝]"

Taper Point Drill BitGeneral Purpose

• Cuts wood and plastic in one operation for the thread and shank of wood screws

• Wood screw size: 8• Steel

Item # FluteLength

Overall Length

Material Drill Dia.

FU20100140 1[¾]" 2[⅞]" Steel [9/64]

FU20100156* 2" 3[⅛]" Steel [9/64]

FU20100171 2[⅛]" 3[¼]" Steel [11/64]

FU20100187* 2[5/16]" 3[½]" Steel [11/64]

High Speed Steel Hole Saw Arbor

• 3/8" hex shank with 2 pins• Fits sizes 1-1/4" to 6"• Comes complete with pilot drill

Item # Shank Size No. of Pins Fits Sizes

Material

FU58000008* [⅜]" Hex 2 1[¼]" - 6" Steel

Carbide Tipped Hole Saw

• Designed for abrasive materials such as fiberglass and particleboard

• 1-7/8" cutting depth• 3 teeth per inch and carbide tipped

to resist abrasion• Not recommended for ferrous metals,

but will outlast high speed steel hole saws in applicable jobs

Item # Size Carbide GritFU58602000* 2" HLS200

Standard Type Plug Cutter4 Flute

• Chamfered plug for easy starting in counterbored hole

Item # ShankDia.

Plug Size Max.Length

FUPC38* [¼]" [⅜]" [½]"

714

Type C Countersink

• 82° included angle (bit not included)• To cut wood and plastic for heads of wood screws• Set of 7 countersinks comes in wood

holder and includes C5, C6, C7, C8, C9, C10 and C12 for #5-12 wood screws

Item # Cutting Dia. Drill Hole Size Overall LengthFUC04 [5/16]" [7/64]" [⅞]"

FUC05 [⅜]" [⅛]" [⅞]"

FUC06 [⅜]" [9/64]" [⅞]"

FUC07* [⅜]" [5/32]" [⅞]"

FUC08 [⅜]" [11/64]" [⅞]"

FUC09 [⅜]" [3/16]" [⅞]"

FUC99* Assorted Assorted Assorted

Stop Collar

• Held solidly in place with two set screws• Inside diameter fits outside diameter of the

Countersink of Counterbore

Item # Inside Dia.FUSC38* [⅜]"

Orbital Sander

• Self-Generated Vacuum System: Designed to work with 3M’s proprietary Clean Sanding self- contained dust collection system to trap and contain airborne particles during the finishing process

• Central-Vacuum: Easily attaches and detaches to your existing central vacuum system for efficient evacuation of dust and debris

• Non-Vacuum: Powerful .28 horsepower; designed to meet or exceed the highest performance standards

• Precision balanced, designed for smooth operation• 12,000 RPM

Item # SizeMM203317* 3” x 4”

Random Orbital Sander

• 3M(TM) Electric Random Orbital Sander Kit 28526 contains 3 items:

• 6 in Non-Vacuum (2.5mm), 3/16 in Orbit Sander 28429, features a whisper quiet 30 volt brushless DC motor with three speed options, an alloy steel variable speed curved throttle lever, 3M gripping material molded into the interchangeable comfort grip, built-in wrist support, conveniently located speed controls, 3M Stikit(TM) Disc Pad 20354 included

• Kit also includes a 3M(TM) Power Cord 28434 (Low Voltage, 18AWG, 12 feet, UL approved) and a 3M(TM) Power Supply with AC Power Cord 28436 (AC input 100-240 volt, Full Range, DC output 30 volt, 5 amp, features removable side bumpers and pre-drilled mounting flange, UL approved)

• 3M(TM) AC Power Cord 28478 (Three Prong, 110 volt, UL ap-proved) is also sold separately.

• New image is forthcoming

Item # Size StrokeMM203195* 5” [3/16]”

MM203270* 6” [3/16]”

MM203171 5” [3/16]”

MM203256* 6” [3/32]”

MM285269 6” [3/16]”

MM204529 Large -

MM203386* Fits all 3M conversion kits -

3M™ Clean Sanding Hookit™System Accessories

• Whatever your application, 3M™ is sure to have an accessory to allow you to maximize your sanding productivity

Item # Description Pack Qty.MM204437* 5” - 31 Hole Hook Saver 20

pz2r x 4 pozi reduced drive 3rd hand & little hand

Documents