Specifications of our Textile Testing Equipments

www.btexlaboratory.com

04/11/23 04:24 PM 2

• Tension Meter: To Check the online tension during passage of yarn.

• 0.1gm Accuracy, Maximum 300gm.

04/11/23 04:24 PM 3

COMB SORTER

SPECIFICATIONS

• Acrylic Transparent sheet : 6” X 8” X 2 peaces, 3” X 8” X 2 Pcs.

• Fiber Mounting Templates : 6” X 8” X 2 peaces, 3” X 8” X 2 Pcs.

• Net Weight of the Unit : 3.680 Kg.

• Overall Dimensions of the Unit : 125(W) X 220(L) X 110(H)

04/11/23 04:24 PM 4

Handy Ends counting Glass (8x). • To determine ends and picks in 1 cm.

04/11/23 04:24 PM 5

Handy Microscope (40x with scale):• Closer view of yarn or fabric.

04/11/23 04:24 PM 6

Digital Microscope 5x,10x,20x,40x & 100x lenses monocular projection microscope with fibre cross section kit, high resolution CCD camera and imaging software with measurement facilities. Scope of use cross section of fibre or yarn, analysis of any fibre, yarn and fabric.

04/11/23 04:24 PM 7

Twist Tester (Manual)

To check the Twist Per Meter of the yarn.

Test length : 50 to 250 mmCounter : Five digit revolution counters.Overall Dimension of the units : 630mm (L), 120mm (W), 350mm (H).Weight of Machine : 6.560 Kg.BS 946:1952

04/11/23 04:24 PM 8

Twist Tester (Semi Automatic)

To check the twist of yarn. Test length 50 mm, 100 mm, 150 mm, 200 mm.

04/11/23 04:24 PM 9

Twist Tester (Auto)

To check the Twist Per Meter of the yarn.

Test length : 250 mmCounter : Four digit revolution counters.Overall Dimension of the units : 620mm (L), 80mm (W), 184mm (H).Weight of Machine : 6.000 Kg.BS 946:1952

04/11/23 04:24 PM 10

Twist Tester (Micro)

To check the Twist Per Meter of the yarn.

Test length : 250 mmCounter : Four digit revolution counters.Overall Dimension of the units : 970mm (L), 125mm (W), 185mm (H)Weight of Machine : 7.700 Kg.BS 946:1952

04/11/23 04:24 PM 11

Wrap Reel (Manual)To Prepare Lea of Yarn to check Denier, etc. Swift Perimeter : 1 MeterNumber of leas made at a time : 5Spread of each lea : 20 mmCounter (Five Digits) : Manual Overall Dimensions of the Unit : 600mm (L),450mm(W),420mm(H)Net Weight of the Unit : 18.00 Kg.Overall Dime. Cone Unit : 452mm (L),349mm(W),669mm (H)Net Weight of the Cone Unit : 4.600 Kg. Free Pocket weighing scale with Wrap reel.

04/11/23 04:24 PM 12

As per standards :BS 2471:1978 (1991)Specification:Swift Perimeter : 1 Meter (optional) or 1.5 yardsNumber of leas made at a time : 3Spread of each lea : 20 mmOverall Dimensions of the main Unit : 450mm (L), 260mm (W), 360mm (H).Net Weight of the main Unit : 3.000 Kg.Overall Dimensions of the cone Unit : 280mm x 260mm x 500mmNet Weight of the cone Unit : 1.800 Kgs (approx).Controls : MAIN, ZERO/RESET.

20. Wrap Reel (Semi Automatic)

04/11/23 04:24 PM 13

Beeseley Balance

To check Count or Denier of the short samples.

Sizing Template : 01 No.Sizing Template Counts System : 05 SystemOverall Dimension of the Unit : 545 (L) X 128 (W) X 198(H)

04/11/23 04:24 PM 14

Yarn Evenness Tester To check the evenness and appearance of the yarn.Over all Dimension of the Unit :61 (W) cm x 35 (D) cm x 27.5 (H) cm. Size of Tapered Board :28.5cmx18cm, Taper Angle 2 Size of Rectangular Board :28.5cm x 18 cm Standard Yarn Spacing :20, 22, 26, 32, 38, 48 WRAPS per INCH Net Weight of the Unit :21 kg.

04/11/23 04:24 PM 15

Crimp Rigidity TesterSwift Perimeter : 1 MeterNumber of leas made at a time : 1Counter (Five Digits) : Manual Overall Dimensions of the Unit : 600mm (L),450mm (W),420mm (H)Net Weight of the Unit : 17.960 Kg.Overall Dimensions of the Cone Unit: 450mm (L),350mm (W),600mm (H).Net Weight of the Cone Unit : 7.5 Kg. (16.5 lbs)

04/11/23 04:24 PM 16

Detailed Product Description It can be applied in various testing purposes: load / elongation test / fracture test.T-screw transfer, manual operation, simple, stability, vertical and horizontal.Dimension: L*W*H(mm)160*240*460;Capacity: 500N Stroke: 150mm Adapt with: SN, SH series force gauge, clamps and digital scale.

Mechanical Fibrometer unit to perform tensile test on Threads

04/11/23 04:24 PM 17

Universal Tensile Testing MachineTo check the tensile properties of single yarn, lea as well as fabric.Over all Dimensions of the Unit : 43cm(L)x30(W)cmx135cm(H)Force rating : 200kg.Force resolution : 20gmMaximum crosshead stroke : 750mm Approx.Crosshead displacement measurement Resolution : 0.1mm.Crosshead speed : 20 to 400 mm/min or fixed as per users requirement.Power Supply : 230 V AC, 50Hz,Single Phase.

04/11/23 04:24 PM 18

Single Yarn Crimp Tester

Over all Dimension of the Unit :76(L)cmx30(W)cmx8cm(H)Weight of unit :800gms.

04/11/23 04:24 PM 19

Package / Shore Hardness Tester

Range : 0-1000 gm..Instrument’s weight : 200 gm.

04/11/23 04:24 PM 20

Package / Shore Hardness TesterSPECIFICATIONS :Product info: digital durometer for shore hardness testing pocket size model with integrated probeParameters displayed: hardness result, average value, max. valueMeasurement range:0-100HA(HD), Measurement deviation:＜ 1%HResolution: 0.1, Auto switch off, With RS232C interfaceOperating conditions: 0 to 40 , Power supply: 4x1.5V AAA (UM-4) battery℃ ℃Battery indicator: low battery indicatorDimensions: 162x65x38mm, Weight (not including probe):173g

Standards: DIN53505, ASTMD2240, ISO7619, JISK7215

04/11/23 04:24 PM 21

18. HTHP Beaker Dyeing Machine (S.S.)Capacity : As per requirementsCapacity of Beaker : 250 ml x 12 BeakersCarriage Rotation : At 22 rpm. ( 2 rpm.)

Maximum operating Temperature : 140ºC.Maximum rate of heating 3.50C/Min.Controlled through temperature controllerhaving auto/manual operation. Heater rating : 2 KWMedium used for Heating : GlycerineElectrical Supply : 3 KW at 230 Volts AC, 1 PhaseGeared Motor : Reversible synchronised geared motor.Overall dimensions of the Unit : 700 mm (W) x 470 mm (H) x 370 mm (D) (Regular size)Net Weight of the Unit : 50 Kgs. (Approx regular size)Application : Multiutility facility for any kind of yarn and fabric dyeing.

04/11/23 04:24 PM 22

Open Bath / Water Bath

Capacity : Max. 12 Beakers Capacity of Beaker : 250 ml. Temperature : Maximum operating Temperature 100º Maximum rate of heating : 3.5ºC/Min. Heater rating : 1 KW Medium used for Heating : Water Electrical Supply : 1 Phase Overall dimensions of the Unit : 24”(W) x 16”(D) x 12”mm(H) Net Weight of the Unit : 48 Kgs. with 12 Beakers

04/11/23 04:24 PM 23

SPECIFICATIONS:Inner dimensions of the Main Bath: 450 X 410 X 295 mmCapacity (in litres) of Main Bath : 29 Litres (Approx.)Number of Beakers (Test Vessels) : 08 Nos.Leak-proof Beakers with Gaskets Standard Seal for Beakers : 08 Nos. Special Neoprene GasketsVolume of each Beakers : 550±50 ml.Distance from Shaft : 45±10 mmSpeed of Rotation : 40±2 rpmTemperature Controller : DIGITALTemperature Regulation : PT-100 with ±2.0°C (As Per I.S.O.)Timer (Digital) : 0-99 MinutesMotor : Single Phase, Geared Motor0 ~ 230 Volts AC, 50 Hz.Overall Dimensions of the unit (without S. S. Stand): 710 x 570 x 785 mmOverall Dimensions of the unit (With S. S. Stand) : 720 x 590 x 1140 mmNet Weight of the Unit (Without S. S. Stand) : 63.5 KgNet Weight of the Unit (With S. S. Stand) : 81.5 Kg.As per standards : ISO 105, BS 1006:1990, AATCC 61 (TEST 1 A ONLY),BS EN 20105,MARKS & SPENCER C4, C5

and ,37

Digital Washing Machine

04/11/23 04:24 PM 24

Color Matching CabinetOverall Dimen. of the Instru. : 71010 (L) x 41410 (W) x 62810(H)mm Overall Dimen. of the Viewing Cavity : 68510(L)x40810(W)x38010(H) Net Weight of the Instrument : 25.480 Kg. LIGHT SOURCESArt. Daylight Fluorescent Lamps (D-65) : 01 Nos. (18 W)Tungsten Filament Lamps (Inc A Lamps) : 04 Nos. (40 W) Cool White Fluorescent Lamp (CWF) : 01 No. (18 W)Triphosphor Fluorescent Lamp (TL-84) : 01 No. (18 W)Ultra-Violet Black Lamp : 01 No. (18 W)Warm White : 01 No. (18 W)ISO 3664,,BS 950,ASTM D 1729 DIN 6173

04/11/23 04:24 PM 25

GSM CutterThe unit is recommended for yield testing i.e. the determination of weight per unit area. The sample cutter cuts out rapidly and accurately circular specimen of 100 Cm2, which is exactly 1 / 100th of a square meter. The result is grams, multiplied by 100, gives the GSM (Grams per square meter) DIRECTLY.Free Pocket weighing scale with G.S.M. cutter.

Grammes per Square Meter = Specimen Weight in Grams x100

04/11/23 04:24 PM 26

Stiffness Tester

Angle of inclination of intersecting plane to horizontal : 41.50 Load on test specimen : 10 + 2 gm / cm lengthOver All Dimensions of the Instrument : 271(W)x148(D)x200(H)Net Weight of Instrument : 4.500 Kgs.

04/11/23 04:24 PM 27

SCOPE ABRASION PILLING

No. Of specimens 1-4 1-4

Exposed area of test specimen 6.45 cm2 6.45 cm2

Working pressure on test specimen 9 kPa (apparel)12 kPa (upholstery)

3 kPa (ASTM D 4970)9 kPa (BS 5690)12 kPa (BS 5690)

Rotational speed of outer pegs 47+2.5 r/min. 47+2.5 r/min.

Drive (speed) ratio of Outer pegs: inner pegs 32.30 32.30

Total Stoke of outer and inner pegs 60.5+0.5 mm 24.0+0.5 mm

Circumferential parallelism of sample holders to abrading tables +0.05 mm +0.05 mm

Martindale Abrasion cum Pilling Tester

04/11/23 04:24 PM 28

SPECIFICATIONS :Size of Wooden Boxes (Inside) : 235 x 235 x 235 mmThickness of Cork Lining : 3.2 mm (As per standards)Speed of Rotation of Boxes : 60 r.p.m.Size of Test Specimen : 12.5 12.5 cm²Size of Rubber Tubes : 31.5mm (OD) x 25.1mm(ID)x140mm(L)Motor : 1/8 H.P. Single Phase geared motor 220V

ACCounter : 5 DIGITS DIGITAL Pre-Set type counterOverall Dimensions of the Unit :813 (W) x 482 (D) x 508 mm (H)

32” (W) x 19” (D) x 20” Inch (H)Net weight : 35 kg (77 lbs)As per standards: BS 5811, IS: 10971, IWS 152, M&S P 18

Digital Pilling Tester

04/11/23 04:24 PM 29

CrockmeterTo determine the colour fastness of textiles to dry /wet rubbingSpecificationDiameter of the Rubbing Finger : 16 mmForce on the Finger : 9 NSize of Crocking Cloth : (5 x 5) CmsLength of the Traverse : 105 ±5 mm Counter (Re-settable) : 4-Digit CounterSize of Test Specimen : 25 x 5 CmOverall Dimension of the Unit : 600 (W) x 190 (D) x 200 (H) mmNet Weight of the Unit : 4 Kg. (9 lbs)Construction : Cold-rolled steel

04/11/23 04:24 PM 30

• Sublimation Fastness Tester• To determine sublimation of dye due to temperature.

04/11/23 04:24 PM 31

Light Fastness TesterLight Source :500W, MBTL Fading Lamp(Mercury Blended Tungsten Lamp)

Test Chamber Temperature :Ambient to 50ºC Temperature Range Control :By Water Circulation in Type ‘A’ Rectangular Cells.Humidity Control :Inserting Saturated Solution in the type ‘A’&’C’ Cells.‘A’ Rectangular Cells :12 Nos.‘C’ Cylindrical Cells :50 Nos.Space per Type :110 x 50 mm ‘A’ Rectangular Cells Specimen size:100x50x15 mmWorking Life of Lamp :2000 HoursPower :220 Volts, single Phase, 50 HZ,A.C. Supply.Power Consumption :Maximum 1 KW.Water :Use of Distilled Water only in the Water Circulation Unit.Dimension of the Main Unit :400 mm(W) x 500 mm(D) x 190 mm(H)Weight of water circulation unit :6.2 kg.Recommended Ambient :200-240C Temperature (Operating) Conditions 50%-65% Relative Humidity

04/11/23 04:24 PM 32

PerspirometerFrame Construction :Stainless steelLoad on the Test Specimen :5 kg.Size of Test Specimen :100 mm x 40 mmSize of Acrylic Separator Plates :115 mm x 60 mmNumber of Separator Plates :210Nos.Dimensions of the Unit :225 mm(L)x72 mm(W)x182 mm(H)Net weight of the Unit :8.3 kg.

04/11/23 04:24 PM 33

Fabric Extensioner

Over all Dimensions of the Unit :61cmx10cmx12cm(H)Weight of unit :20/500Kg.

04/11/23 04:24 PM 34

Fabric thickness GaugeSpecificationsRange of measurement : 0-10 mm.Least count of dial Gauge: 0.01 mm.Diameter of anvil : 60 mm.Diameter of pressure foot (Interchangeable):10mm, 25mm.Load on the pressure foot: 78.5 g (100 gm/sq.cm.)Throat depth : 22mmNet weight of the Unit : 340 gms

04/11/23 04:24 PM 35

Shrinkage TemplateIt consists of a fine calibrated Marking Template which is used to markFabric with 14 inches bench marks for accurately determining Change in fabrics/garments. After the fabrics/garment is laundered/drycleaned/washed Processed, the dimensional change can be read directly and accurately In percent change with the calibrated shrinkage scale/rule.

04/11/23 04:24 PM 36

Water Repellency Tester

Over all Dimensions of the Unit : 25cmx30cmx55cm(H)This method is aplicable to all fabrics which may or may not have been given a water repellent finish or coating. It is not intended for use in predicting rain penetration resistance of fabrics, since it does not measure penetration of water through the fabric.As per standards : AATCC 22,BS 3702, ISO 4920

04/11/23 04:24 PM 37

Tearing Strength Tester

Capacity : 1600 Gms(By Brass pendulum only) : 3200 Gms(By adding Augmenting weights at the back) : 6400 Gms (By adding Augmenting weights at the front)

Clamping surface of each Clamp : 35.5 mm length x 15.5 mm widthDistance between clamps : 2.5±0.25mmTearing Distance : 43±Slit Size : 20 mmScale reading : 0 to 100% of range Calibration check weight : At 1600 Gms ,at 3200 Gms.

At 6400 Gms.Overall Dimensions of Unit : 470(W)x 300(D)x410(H) mm.

18.5” (W)x12” (D)x16”(H) Inch.Net wt of the Unit (With checkWt-1600, 3200&6400 Gms) : 29.5Kg.(64.9lbs) As per standards : BS 4153, ASTM D1424, DIN 53862,M & S 29

04/11/23 04:24 PM 38

SPECIFICATIONS:Size of the Test Specimen : 40mm x 15mm.Creasing Load : 1 Kg. (Stainless Steel)Angle Measurement : On an Engraved Circular Scale graduated in 1 deg.Scale Measurement : 0-180 DegreesMaterial Used : All Stainless Steel (except base)Size of the Tester : 9 Kg

As per standards : : ISO 2313,BS EN: 22313,AATCC 66,,ASTM D 1295,IS: 4681

Crease Recovery Tester

04/11/23 04:24 PM 39

Densimeter

To determine E.P.I. and P.P.I. of plain weave fabric.

04/11/23 04:24 PM 40

Sequence Checking MachineA handy instrument used to check the ‘S’ and ‘Z’ sequence in the fabric which has battery back up so that we can check the sequence on running loom.Over all Dimension of the Unit :36cmx26cmx15cm(H)Weight of unit :850Gms.

04/11/23 04:24 PM 41

Oven(S.S.)

Used for heating and undertaking other oven dry tests in the laboratory.Temp range ambient to 250°C.Over all Dimension of the Unit : 45cm(L)x40(W)cmx62(H)cm

04/11/23 04:24 PM 42

Lab Incubator: • Temperature ambient minimum 2º c.

04/11/23 04:24 PM 43

ZigZag Cutter

Used to cut the samples in zig-zag style of required size. Size of cutting pad : 31” x 28”. Size of blade : 50 c.m. Long. Machine dimensions : 31” (d)x 28”(w) x 54” (h). Machine weight : 28/500 Kg.

04/11/23 04:24 PM 44

SPECIFICATIONS :Power requirements : 230 V AC, 50 Hz, 0.75 KW.Power readout : Digital display with meter out.Machine dimensions : 90”(w) x 60” (d) x 80” (h)View Area : 36” x 72”.Machine weight : 260 Kg.

Fabric Inspection Machine

04/11/23 04:24 PM 45

Digital weighing scaleCapacity 210 gms Accuracy 0.0001gm

04/11/23 04:24 PM 46

• Digital weighing scale• Capacity 10 gms • Accuracy 0.001gm

04/11/23 04:24 PM 47

Pocket Weighing ScaleAn economical balance to weigh the samples for checking the GSM of the fabrics. To be used with GSM cutter and also weigh the yarn for checking denier.

Capacity 100 gms Accuracy 0.01gm

04/11/23 04:24 PM 48

Yarn Speed & Length Meter

The Length Meter combines the functions of three separate instruments in one, easy-to-use device. It accurately measures the speed and length of yarns, wires and other filaments using a unique "wrapper" roller. This precision roller directs the filament onto the low-inertia, U-grooved measuring wheel to maximize contact and eliminate filament slip and breakage.

The Length Meter can also be used as either a contact or non-contact tachometer to measure rotational speeds of shafts, motors, pulleys, etc. or linear speeds of moving surfaces such as conveyor belts, webs of fabric, etc.

04/11/23 04:24 PM 49

Stroboscope50-12,000 Flashes per minute. AC 220 V Supply

04/11/23 04:24 PM 50

Stroboscope50-12,000 Flashes per minute. Cable free with battery back up facilities.

04/11/23 04:24 PM 51

Moisture MeterMoisture content 0-50%, Temperature  – 10-60° C.

04/11/23 04:24 PM 52

Sound Level Meter30~130dB

04/11/23 04:24 PM 53

Lux Meter

0-50000 LUX 0-5000 FC

04/11/23 04:24 PM 54

Tachometer

Rotative velocity laser 2.5-99999 r/min, Contact 0.5-1999r/min

04/11/23 04:24 PM 55

Air Permeability Tester

• THE Air Permeability Tester is a unique, instrument for determination of the air permeability (or of the pressure drop at a selectable air velocity) and, with some restrictions, of the thickness of fabrics, Nonwoven, felts and films. The main application is paper machine clothing.

04/11/23 04:24 PM 56

Water Permeability

• Porosity and water permeability are two distinct terms that describe different characteristics of vascular prostheses. The porosity is a measure of the void fraction within the prosthesis wall and is believed to give a rough prediction of the capacity of the graft to anchor newly formed surrounding tissue after implantation, whereas the water permeability indicates the rate at which water can flow through the prosthesis wall and, when measured under physiological pressure conditions, provides the surgeon with information about the need for preclotting prior to implantation. The literature has not always clearly distinguished between these two terms, and some authors in fact have suggested that they both refer to the same property of a prosthesis. In an attempt to clarify the issue, porosity and water permeability measurements were made on 34 commercial vascular prostheses having different textile constructions. Linear regression analysis demonstrated that these two characteristics are only weakly related (r = 0.59). It is therefore recommended that the current draft standards for such devices reference both properties: porosity and water permeability.

04/11/23 04:24 PM 57

Photos not available

• Fibre Wall Chart: Shows the characteristic properties of all types of fibres. • Fire Retardancy Tester: To check the flame resistance of the fabric.• Air Permeability Tester: To determine the air permeability of the fabric.• Flexing Tester: To determine the flexing of the fabric.• Bursting Strength Tester: To check the bursting strength of fabrics.

04/11/23 04:24 PM 58

• All Standards and standard’s accessories available.• AATCC• ASTM• BSEN• ISO• BIS• M&S

04/11/23 04:24 PM 59

NOTE

• Shown all images are just for your knowledge and the final product design can be change.

• All the specifications are given to you on the bases of general systems and may be changed during the process of supply time as per newly updated parts inclusions.

• We will send you the images of newly colored instrument’s pictures through the email and you can give suggestions for the color selection and the way of design will be upgrade without changing international standard’s requirements.