teflon coated fg - 38 non-porous · pdf fileour non-porous teflon coated fiberglass features a...

Fibre Glast Developments Corporation 800.214.8579 www.fibreglast.com Product Data Sheet Teflon Coated FG - 38" Non-Porous Part # - 1587 High Temp Laminated Release Fabric Our Non-Porous Teflon Coated Fiberglass features a proven film lamination and coating technology which is less permeable than traditional coated products. It offers a uniform PTFE thickness over a coated fiberglass substrate. It is compatible with all composite manufacturing processes at temperatures up to 600 degrees F. Available in 38" wide rolls/packages. Application #1587 is designed for vacuum bag lay-up composites and metal-to-metal bonding structures. #1587 offers exceptional tensile strength in both fill and warp directions. The fabric leaves a fine surface suitable for priming and secondary bonding. This product is suitable for use in direct food contact applications under 21 CFR 177.1550 (FDA). Physical Property Value Metric Equivalent Test Method Roll Width 38 in (min.) 96.5 cm ASTM-D-3774 Air Flow (cu.ft/Min) 20-40 34-68 Overall Weight 5.5 oz./sq. yd 190g/sq. m Operating Temperature -100 - 600F -73 - 316C Thickness 0.004 in 0.010 cm ASTM-D-1777 Information present herein has been compiled from sources considered to be dependable and is accurate and reliable to the best of our knowledge and belief but is not guaranteed to be so. Nothing herein is to be construed as recommending any practice or any product violation of any patent or in violation of any law or regulation. It is the user’s responsibility to determine for himself the suitability of any material for a specific purpose and to adopt such safety precautions as may be necessary. We make no warranty as to the results to be obtained in using any material and, since conditions of use are not under our control, we must necessarily disclaim all liability with respect to the use of any material supplied by us. ©Copyright 2010 Fibre Glast Developments Corporation Fibre Glast Developments Corporation 385 Carr Drive Brookville, Ohio 45309 Phone – 800.214.8579 Fax – 937.833.6555 www.fibreglast.com PDCT-PDS-00952-02/16-CC Page 1 of 1 PTFE % by Weight Weight 74% 74% Tensile Strength (Warp) 90 lbs/in 790 N/5 cm Tensile Strength (Fill) 70 lbs/in 610 N/5 cm Tear Strength (Warp) 3 13 N/5 cm Tear Strength (Fill) 2 9 N/5 cm

Upload: lenguyet

Post on 26-Mar-2018

218 views

Category:

Documents

1 download

Report

Download

Embed Size (px):

TRANSCRIPT

Page 1: Teflon Coated FG - 38 Non-Porous · PDF fileOur Non-Porous Teflon Coated Fiberglass features a proven film lamination and coating ... strength in both fill and warp directions. The

Fibre Glast Developments Corporation 800.214.8579 www.fibreglast.com Product Data Sheet

Teflon Coated FG - 38" Non-PorousPart # - 1587

High Temp Laminated Release Fabric

Our Non-Porous Teflon Coated Fiberglass features a proven film lamination and coating technology which is less permeable than traditional coated products. It offers a uniform PTFE thickness over a coated fiberglass substrate. It is compatible with all composite manufacturing processes at temperatures up to 600 degrees F. Available in 38" wide rolls/packages.

Application #1587 is designed for vacuum bag lay-up composites and metal-to-metal bonding structures. #1587 offers exceptional tensilestrength in both fill and warp directions. The fabric leaves a fine surface suitable for priming and secondary bonding. This product is suitable for usein direct food contact applications under 21 CFR 177.1550 (FDA).

Physical Property Value Metric Equivalent Test Method

Roll Width 38 in (min.) 96.5 cm ASTM-D-3774

Air Flow (cu.ft/Min) 20-40 34-68

Overall Weight 5.5 oz./sq. yd 190g/sq. m

Operating Temperature -100 - 600F -73 - 316C

Thickness 0.004 in 0.010 cm ASTM-D-1777

Information present herein has been compiled from sources considered to be dependable and is accurate and reliable to the best of our knowledge and belief but is not guaranteed to be so. Nothing herein is to be construed as recommending any practice or any product violation of any patent or in violation of any law or regulation. It is the user’s responsibility to determine for himself the suitability of any material for a specific purpose and to adopt such safety precautions as may be necessary. We make no warranty as to the results to be obtained in using any material and, since conditions of use are not under our control, we must necessarily disclaim all liability with respect to the use of any material supplied by us. ©Copyright 2010 Fibre Glast Developments Corporation

Fibre Glast Developments Corporation 385 Carr Drive Brookville, Ohio 45309 Phone – 800.214.8579 Fax – 937.833.6555 www.fibreglast.com

PDCT-PDS-00952-02/16-CC

Page 1 of 1

PTFE % by Weight

Weight

74%74%

Tensile Strength (Warp) 90 lbs/in 790 N/5 cm

Tensile Strength (Fill) 70 lbs/in 610 N/5 cm

Tear Strength (Warp) 3 13 N/5 cm

Tear Strength (Fill) 2 9 N/5 cm

POROUS-COATED ALLOY Jeff Archbold thesis › bitstream › 1807 › 13618 › 1 › MQ46206.pdfFatigue properties of sintered porous coated Ti-6Al-4V EL1 ratating beam fatigue specimens

teflon®backup ringsallsealsinc.com/teflon-pdfs/8510-1181_teflon_back-up...For assistance call 303.277.4606 3 Function of Teflon® Back-Up Rings Teflon back-up rings are designed to