technical datasheets · 2013. 9. 20. · component selection guidelines uni 8™ technical...

T H E U L T I M A T E I N F A L L P R O T E C T I O N

TECHNICAL DATASHEETS

Always read and follow the warnings and instructions for use© Copyright Capital Safety Systems Ltd 2013

Uni 8™

ContentsUni 8™ Technical Datasheets

Issue Date: 30/06/06 Issue No: 1 Page 1 of 2

Contents 2

Component Selection Guidelines 3

Component Properties 4

1327 - Typical Uni 8™ System 5

1328 - Typical Uni 8™ evolution™ System 6

0906 - Uni 8™ 8mm Hex Swage Toggle 7

0917 - Uni 8™ 8mm Hex Swage Joiner 8

909 - Uni 8™ Intermediate Bracket 9

924 - Uni 8™ Variable Bracket 10

1315 - Uni 8™ Straight Eye 11

1295 - Uni 8™ evolution™ Intermediate Bracket 12

1298 - Uni 8™ evolution™ Short Curve 13

1301 - Uni 8™ evolution™ Curve 14

1217 - 8mm 7x7 SS Cable /M 15

911 - Uni 8™ 45° SS Wire Corner 16

910 - Uni 8™ 90° SS Wire Corner 17

916 - Uni 8™ Rigid 90° Corner 18

926 - Uni 8™ Rigid 45° Corner 19

1218 - 8mm UniGrab & Carabiner 20

1308 - Uni 8™ evolution™ Traveller 21

1306 - Uni 8™ evolution™ Triple Articulated Anchorage Point 22

1307 - Uni 8™ evolution™ Mono Attachment Anchorage Point 23

0840 - Uni 8™ Wall Fixing Plate 24

866 - Uni 8™ Energy Absorber 25

1304 - Uni 8™ evolution™ Energy Absorber 26

1313 - Uni 8™ 8mm Hex Swage Tensioner 0.8kN 27

1320 - Uni 8™ Arm Pack 28

1329 - Uni 8™ System Tag 29

1323 - Tools List 30

Issue Date: 01/05/13 Issue No: 1

Component Selection GuidelinesUni 8™ Technical Datasheets


RULES

1. ONLY 8mm, 7x7 Stainless Steel Cable (7240211) can be used with the Uni 8™ & Uni 8™ evolution™ System.

2. Systems designed with the Uni 8™ evolution™ Intermediate, Curve & Short Curve brackets (7240110, 7240130 & 7240120) can ONLY be used with Uni 8™ evolution™Traveller (7240100).

3. Uni 8™ evolution™ Traveller (7240100) IS compatible with all Uni-8™ Components.

4. Uni 8™ evolution™ Intermediate and Corner brackets (7240110, 7250120 & 7240130) can ONLY be used with Uni 8™ evolution™ Traveller (7240100).

5. It is Recommended that Uni 8™ Cable guides (7241065, 7241067, 7241068 & 7241069) & Uni 8™ evolution™ Brackets (7240110, 7250120 & 7240130) are not mixedwithin a single system for aesthetic reasons ONLY.

6. Uni 8™ evolution™ Mono & triple Attachment anchorage points (7240175, 7240175) can ONLY be used with the Uni 8™ evolution™ Energy Absorber (7240151).

Uni 8™ evolution™ Traveller Uni 8™ Unigrab

7240100 7234020

Uni 8™ Intermediate Bracket 7241065

Uni 8™ 45° SS Wire Corner (for use with 7241065)

7241069

Uni 8™ 90° SS Wire Corner (for use with 7241065)

7241068

Uni 8™ evolution™ Intermediate

7240110

Uni 8™ evolution™ Curve 7240130

Uni 8™ evolution™Short Curve

7240120

Uni 8™ evolution™Energy Absorber*

7240151

Uni 8™ Energy Absorber 7241073

Uni 8™ Tensioner 7240166

Uni 8™ evolution™ Triple Articulated anchorage point

7240175

Uni 8™ evolution™ Mono Attachment anchorage

7240176


Uni 8™ Component PropertiesUni 8™ Technical Datasheets


Capacity (kg)

No. Users

Activation Force (kN

)

Max deploym

ent length (m

m)

Breaking strength (kN

)

Torque load (N

/m)

Weight (kg)

Operating temp range (°C)

life (yrs.)Norm

alenvironm

entAngle (°)

Max Min Max Minvertical

(±)

UniGrab 7234020 136 1 16

Uni 8™ evolution™ Traveller

7240100 140 1 15

8mm Hex Swage Toggle 7234011 38

Uni 8™ Tensioner 7240166 37

Uni 8™ evolution™ Intermediate

7240110 25 60 0.2 60 -40 10 15

Uni 8™ evolution™ Curve

7240130 30 60 0.7 60 -40 10 45 90 15

Uni 8™ evolution™ Short Curve

7240120 30 60 0.4 60 -40 10 15 45 15

Uni 8™ evolution™ Energy Absorber

7240151 4 550 37 5.2 60 -40 10

Uni 8™ evolution™ Triple Articulatedanchorage point

7240175 37 60 1.6 60 -40 10

Uni 8™ evolution™ Mono Attachment

anchorage7240176 30 60 0.7 60 -40 10

Uni 8™ 8mm Hex Joiner 7234012 38 0.1 60 -40 10

Uni 8™ Wall Fixing plate 7234021 50 60 1.8 60 -40 10

Uni 8™ Straight eye 7240122 >45 60 0.4 60 -40 10

Uni 8™ Energy Absorber 7241073 4 275 38 1.1 60 -40 10

Uni 8™ Intermediate Bracket

7241065 16 50 0.4 60 -40 10 15 15 15

Uni 8™ Variable bracket 7241066 16 50 0.6 60 -40 10 Customisable 15

8mm, 7 x 7 Stainless steel Cable

7240211 38.7 0.2 per m 60 -40 10

Uni 8™ 45° SSWire Corner

7241069 * 0.1 60 -40 10 60 30 15

Uni 8™ 90° SSWire Corner

7241068 * 0.1 60 -40 10 105 75 15

* Only Tested as part of a system and was not the limiting component


Technical Datasheet: 1327Typical Uni 8™ System

TM

48

www.

capi

tals

afet

y.com

OSHA

191

5 15

9, 1

926

502

Subp

art M

and

EN

795:

1996

B

C

D

E

F

G

H

A

I


SYSTEM SPECIFICATION

A Uni 8™ Wall Fixing Plate (7234021)

B Uni 8™ Energy Absorber (7241073)

C 8mm Hex Swage Toggle (7234011)

D 8mm, 7 x 7 Stainless Steel Cable (7240211)

E Uni 8™ Intermediate Bracket (7241065)

F UniGrab & Carabiner (7234020)

GUni 8™ 8mm Hex Swage Tensioner 0.8kN (7240166)

H Uni 8™ Straight Eye (7240122)

I Uni 8™ 90 SS Wire Corner (7241068)

CONFORMITY EN 795 Class C, OSHA Compliant, AS/NZS 1891.2

A

B

C

D

E

F

I

GH


C

B

D E

A

F G

Technical Datasheet: 1328Typical Uni 8™ evolution™ System


D 8mm, 7 x 7 Stainless Steel Cable (7240211)

G Uni 8™ Hex Swage Tensioner 0.8kN (7210166)

J Uni 8™ evolution™ Triple Attachement Anchorage (7240175)

K Uni 8™ evolution™ Energy Absorber (7240151)

L Uni 8™ evolution™ Intermediate Bracket (7240110)

M Uni 8™ evolution™ Traveller (7240100)

N Uni 8™ evolution™ Curve (7240130)

SYSTEM SPECIFICATION

CONFORMITY EN 795 Class C, OSHA Compliant, AS/NZS 1891.2

JGDN

L

M

K


Technical Datasheet: 0906Uni 8™ 8mm Hex Swage TogglePart No: 7234011

APPLICATION

Used to hold the cable fi rmly in place at one end of the system. For use with 8mm 1x19 or 7x7 wire only. Refer to installation instructions for information on assembly and installation.19kN max permitted arrest load, min break strength 38kN.

COMPONENT SPECIFICATION


30mm (1.18”)

179m

m (7

.05”

)

82m

m (3

.23”

)

12.5mm (0.63”)

Before Swaging

28mm (1.10”)

18mm (0.71”)

Ø12.7mm (0.5”)

MATERIAL 316 Stainless Steel

FINISH Natural

WEIGHT 0.33kg (0.73 lbs)

QUALITY 100% Visual Inspection


Technical Datasheet: 0917Uni 8™ 8mm Hex Swage JoinerPart No: 7234012

APPLICATION

Used to join two sections of cable together. For use with 8mm 1x19 or 7x7 wire only. Refer to installation instructions for information on assembly and installation.19kN max permitted cable tension, min break strength 38kN.



190m

m (7

.48”

) bef

ore

swag

ing

200m

m (7

.87”

) afte

r sw

agin

g

79m

m (3

.11”

)

A8mm 1x19 or 7x7 Stainless Steel Cable*

BUni 8™ 8mm Hex Swage Joiner

*Order Separately.


FINISH Natural



A

B

A


Technical Datasheet: 909Uni 8™ Intermediate Bracket Part No: 7241065

APPLICATION

The Uni 8™ intermediate bracket is designed to allow system installation in a variety of positions. The bracket can be mounted on solid posts or structures with consideration given to isolation methods to prevent cross contamination where necessary.Minimum grade A470 M12 fastening should be used to fi x bracket to structure at a recommended torque of 50 Nm.



107.

5mm

(4.

2”)

80mm (3.2”)

MATERIAL Nylon 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel

FINISH Natural Natural Electropolished Electropolished



A B C D

B

A

D

C

Ø9mm

A M8 Nylon Shear Pin

B M8x70 A470 SS Fixing

C Bracket Arm

D Carrier


Technical Datasheet: 924Uni 8™ Variable BracketPart No: 7241066

APPLICATION

For use on pitched roof systems when the Uni 8™ system is required to cross a ridge or follow a hip type corner.Minimum grade A470 M12 fastening should be used to fi x bracket to structure at a recommended torque of 50 Nm.



79.5

mm

(3.1

”)

107.

5mm

(4.2

”)

60mm (2.4”)

420mm (16.5”)


FINISH Electropolished



Ø9mm


Technical Datasheet: 1315Uni 8™ Straight Eye Part No: 7240122

APPLICATION

The Uni 8™ Straight Eye is designed as a multipurpose end anchor for wall and overhead horizontal systems.Minimum breaking strength greater than 45kNSafe to load in direction A & B. DO NOT LOAD IN DIRECTION C



80m

m (3

.15”

)

R115mm (0.2”)

49mm (2”)

16.5mm (0.65”)

58.6mm (2.3”)

Direction C

Direction A

55mm (2.2”)

Direction B



WEIGHT 0.35kg (12.35 oz)



Technical Datasheet: 1295Uni 8™ evolution™ Intermediate BracketPart No: 7240110

APPLICATION

The Uni 8™ evolution™ intermediate bracket can be mounted onto a variety of structures, with consideration given to isolation methodsto prevent cross contamination where necessary.Minimum grade A470 M12 fastening should be used to fi x bracket to structure at a recommended torque of 50 Nm.



A B C

A Body

B Cable Guide

C Protection Cover

150mm (5.9”)

72m

m (2

.83”

)

32m

m (1

.26”

)

64mm (2.52”)

Ø9mm (0.35”)

READ COMPONENT SELECTION GUIDELINES

MATERIAL 316 Stainless Steel Anti-UV Polyamide Anti-UV Polyamide

FINISH Electropolished Natural Natural



A B

C


Technical Datasheet: 1298Uni 8™ evolution™ Short CurvePart No: 7240120



A B C D

A Body

B Cable Guide

C Curve Reinforcement

D Protection Cover

250mm (9.84”)

44m

m (1

.73”

)

76m

m (2

.99”

)

77mm (3.03”)64mm (2.52”)

Ø9mm (0.35”)

APPLICATION

The Uni 8™ evolution™ intermediate bracket can be mounted onto a variety of structures, with consideration given to isolation methodsto prevent cross contamination where necessary. Minimum grade A470 M12 fastening should be used to fi x bracket to structure at a recommended torque of 50 Nm. READ COMPONENT

SELECTION GUIDELINES

MATERIAL 304 Stainless Steel Anti-UV Polyamide 304 Stainless Steel Anti-UV Polyamide

FINISH Electropolished Natural Electropolished Natural



A

B

CD


Technical Datasheet: 1301Uni 8™ evolution™ CurvePart No: 7240130

APPLICATION

The Uni 8™ evolution™ curve is capable of forming curves ranging from 45 to 90 degrees so that the lifeline can be adjusted to the needs of each installation.Minimum grade A470 M12 fastening should be used to fi x bracket to structure at a recommended torque of 50 Nm.



A B C D

A Body

B Curve Reinforcement

C Flexible Cable Guide

D Protection Cover

480mm (18.9”)

85m

m (3

.35”

)


MATERIAL 304 Stainless Steel 304 Stainless Steel Anti-UV Polyamide Anti-UV Polyamide

FINISH Electropolished Electropolished Natural Natural



A

B

C

D


Technical Datasheet: 12178mm 7x7 SS Cable /M Part No: 7240211

APPLICATION

For use in RoofSafe™ Cable and Uni 8™ horizontal applications. Minimum Break Strength 38.7kN (8700.1lbf)Note: Can also be purchased on a 1000m drum (3 280.8ft) (Part Number: 7240219)



Ø8mm


FINISH Natural

WEIGHT 0.27kg /M

QUALITY 100% Visual Inspection. 100% Molybdenum Tested


Technical Datasheet: 911Uni 8™ 45° SS Wire CornerPart No: 7241069

APPLICATION:

To be used in conjunction with Uni 8™ intermediate brackets (7241065) to form a 45° corner in the orientation required.Minimum grade A470 M12 fastening should be used to fi x bracket to structure at a recommended torque of 50 Nm.



10mm (0.39”)

28.5mm (1.12”) Straight Length

O/D 12mm

45

I/D 9mm

0.5mm

R206mm R200mm

165mm (6.5”)




QUALITY 100% Visual Inspection.

109m

m (4

.29”

)


Technical Datasheet: 910Uni 8™ 90° SS Wire CornerPart No: 7241068

APPLICATION

To be used in conjunction with Uni 8™ intermediate brackets (7241065) to form a 90° corner in the orientation required.Minimum grade A470 M12 fastening should be used to fi x bracket to structure at a recommended torque of 50 Nm.



10mm (0.39”)

28.5mm (1.12”) Straight Length

O/D Ø12mm

90

I/D Ø9mm

0.5mm

R206mm R200mm






Technical Datasheet: 916Uni 8™ Rigid 90° CornerPart No: 7241063

APPLICATION

Used for fl oor mounting or with the use on rigid posts. CAN NOT be used in conjunction with RoofSafe™ posts. For shock absorption element use with inline absorbers.(Part Number - 7241073)Minimum grade A470 M16 fastening should be used to fi x bracket to structure or rigid posts at a recommended torque of 50 Nm.




FINISH Polished



Ø16.5mm

300mm (11.8”)

60m

m(2

.36”

)

111.

5mm

(4.2

”)


Technical Datasheet: 926Uni 8™ Rigid 45° CornerPart No: 7241064

APPLICATION

Used for Floor mounting or with the use of rigid posts. CAN NOT be used in conjunction with RoofSafe™ posts. For shock absorption element use with Inline absorbers (7241073)Minimum grade A470 M16 fastening should be used to fi x bracket to structure or rigid posts at a recommended torque of 50 Nm.



Ø16.5mm

300mm (11.8”)

60m

m(2

.36”

)

111.

5mm

(4.2

”)






Technical Datasheet: 12188mm UniGrab & CarabinerPart No: 7234020

APPLICATION

For use as an attachment device for a single user in conjuction with the Uni 8™ and RoofSafe™ Cable systems. Note: Maximum user weight 136kg. Only to be used with carabiner provided.To prolong the life of the product, do not leave on the system when not in use.



26mm (1.02”)

Ø15.5mm (0.61”)

4.5

- 6.1

mm

(0.1

8” -

0.24

””)

60mm (2.36”)

63m

m (2

.48”

)

A UniGrab

B Carabiner

BA

MATERIAL 316 Stainless Steel Silver

FINISH Electropolished Silver Zinc Passivate

WEIGHT 0.42kg (0.93 lbs))

QUALITY 100% Visual, alignment and interface checks

A

B


Technical Datasheet: 1308Uni 8™ evolution™ TravellerPart No: 7240100

APPLICATION

The Uni 8™ evolution™ Traveller is the interconnecting element between the user and the lifeline. Automatic pass through over intermediate brackets and curves means that the user can stay connected to the lifeline permanently.



A B C D

27mm (1.12”)

A Anchorage Ring

B Body

C Friction Reducing Rollers

D Plastic Parts


MATERIAL Aluminium T6 316L Stainless Steel Polyamide Anti-UV Polyamide

FINISH Natural



D

A

B

C


Technical Datasheet: 1306Uni 8™ evolution™ Triple Articulated Anchorage Point Part No: 7240175

APPLICATION

The Uni 8™ evolution™ articulated anchorage point is used to set up lifeline anchorage points. The multi-directional articulation of the anchorage point meansthat it can be incorporated into every confi guration (wall, fl oor or overhead) dealing with solicitation (shearing or tearing). Breaking strength: 37kN (8200lbs).Minimum grade A470 M12 fastening should be used to fi x bracket to structure at a recommended torque of 50 Nm. Safe to load in direction A & B. DO NOT LOAD IN DIRECTION C



126mm (5”)

Ø13.5mm (0.53”)

Direction B Direction C Direction CDirection B

Direction A

110m

m (4

.33”

)

84m

m (3

.3”)

150mm (5.9”)

M12 Bolt

62m

m (2

.52”

)

A Body

B Plate






A

B


Technical Datasheet: 1307Uni 8™ evolution™ Mono Attachment Anchorage PointPart No: 7240176

APPLICATION

The Uni 8™ evolution™ mono-attachment anchorage is the simplest solution for installing lifeline anchorage points. Can only be used where the structure is strong enough to take the single load point such as structural steel work and concrete over 100mmMinimum grade A470 M16 fastening should be used to fi x bracket to structure at a recommended torque of 50 Nm.Safe to load in direction A & B. DO NOT LOAD IN DIRECTION C



62mm (2.44”)

Ø12.

1mm

(0.4

8”)

27mm (1.12”)

A Body

B M12 Fastener






Direction CDirection BDirection B Direction C

Direction A

A

B


Technical Datasheet: 0840Uni 8™ Wall Fixing Plate Part No: 7234021

APPLICATION

For use in conjuction with the Uni 8™ straight eye or other anchor points to spread the load back to the structure. Recommended Bolts - M12 A470 (minimum grade) Minimum breaking strength 41.65kN (9363.29lbf)Static strength of wall plate in: Direction A- 53kN - Direction B- 54kN



75m

m (2

.95”

)

42m

m (1

.65”

)

12m

m (0

.47”

)

Ø13mm (0.51”) M16 Thread

Direction A

Direction B

250mm (9.84”)






APPLICATION

For use in Uni 8™ & Uni 8™ overhead systems to reduce loading generated in a fall arrest situation. Reduces maximum fall arrest load by up to 4.5 kN (minimum system load will not fall bellow 7.5kN).N.B. When calculating the minimum ground clearance for systems using 7241073 Inline energy absorbers, be sure to consult Uni 8™ calculation software.In systems with corners two inline energy absorbers maybe required.



4mm

(0.1

6”)

Ø13mm

245mm (9.64”)

Ø12mm

65m

m (2

.56”

)Technical Datasheet: 866Uni 8™ Energy AbsorberPart No: 7241073





TM

4 8

www.capitalsafety.com

OSHA 1915 159, 1926 502 Subpart M and EN 795:1996


Technical Datasheet: 1304Uni 8™ evolution™ Energy Absorber Part No: 7241051

APPLICATION

The Uni 8™ evolution™ energy absorber is installed at the end of the lifeline, of which limits the forces at the anchor points to protect the accomodating structure.Breaking strength: 37 kN (8200 lbs). Absorption threshold 10kN (880 lbf). Absorption travel: MAX 800mm (2ft 7.5inches). When calculating the minimum ground clearance for systemsusing 7240151 Uni 8™ evolution™ energy absorbers, be sure to consult evolution™ calculation software. In systems with corners two inline energy absorbers maybe required.



558mm (23.15”)

R70

142m

m (5

.59”

)80

mm

(3.1

4”)

MATERIAL Housing: Anti-UV polyamide. Internals: 304 Stainless Steel. Absorbing Elements: Bronze, 304 Stainless Steel

FINISH Natural / Electropolished





Technical Datasheet: 1313Uni 8™ 8mm Hex Swage Tensioner 0.8kNPart No: 7240166

APPLICATION

The Uni 8™ tensioner unit is attached to the anchor point using the clevis pin and split pin. It is used to set the tension of the cable in horizontal applications.Refer to installation instructions for information on assembly and installation.For use with 8mm 1x19 or 7x7 wire only. 19kN max permitted cable tension, min break strength 38kN.



A Clevis Pin

B Cotter Pin

C Tension Indicator Disc

D Lock Nut

E Turn Buckle

F Lock Nut

G Stud

400m

m (1

5.75

”)


FINISH Natural / Electropolished



A

B

C

E

F

D

G


Technical Datasheet: 1320Uni 8™ Arm PackPart No: 7241075

APPLICATION

Works in conjunction with an intermediate bracket (7241065) as a guide for the system cable to feed through strengthening the cable over a larger span.



MATERIAL 316 Stainless Steel Nylon

FINISH Electropolished Natural

WEIGHT 0.14kg


BA

B

A


APPLICATION

For use on all Uni 8™ and Uni 8™ Overhead systems. (Languages: English, Spanish, Dutch, German, Portugese, Italian and Swedish).Must be attached in a visible location near the start of the system. It is completed by the installer with essential information fro the user.



214.6mm (8.45”)

90m

m (3

.54”

)Technical Datasheet: 1329Uni 8™ System TagPart No: 7241257

MATERIAL Aluminium 5005

FINISH Anodised. Screen printed at low temperature baked.

WEIGHT 9g (0.32oz)


EN795:1996 Class COSHA COMPLIANTAS/NZS 1891.2

Installation Date / Installatiedatum / Fecha de instalación / Montagedatum /Date d’installation / Data da instalação / Data installazione / Installationsdatum

Installed By / Geïnstalleerd door / Instalado Por / Montiert durch / Installateur / Instalado por / Installato da / Installerad av

Contact Number / Contactnr. / Tel. de contacto / Kontakttelefon / Téléphone / Nº de Contacto / Numero contatto / Kontaktnummer

Min. Ground Clearance (m) / Min. vrije valruimte (m) / Distancia minima hasta el suelo (m) / Mindestabstand zum Boden (m) / Hauteur libre minimale (m) / Altura mínima livre (mt) / Distanza libera minima da terra (m) / Min. höjd ovanför marken

Max. Users Per System / Max. aantal gebruikers per systeem / Máximo de usuarios por sistema / Maximale Benutzer pro System / Nombre maximal d’utilisateurs par système / Nº máximo de utilizadores por linha / N. utenti max. per sistema / Max. användare per system

Max. Users Per Span / Max. aantal gebruikers per overspanning / Máximo de usuarios por vano / Höchstzahl der Benutzer pro Spannweite / Nombre maximal d’utilisateurs par portée / Nº máximo de utilizadores por vão / N. utenti max. per sezione / Max. användare per skena

Next Service Date / Datum volgende keuring / Próxima fecha de revisión / Termin der nächsten Wartung / Prochaine date d’entretien / Data da próxima Inspecção / Data prossima manutenzione / Nästa servicedatum

System Serial No. / Serienummer / Número de serie del sistema / Seriennummer des Systems / Numéro de série / Nº de série do sistema / N. di serie sistema / Systemets serienr.

Use Energy Absorbing Lanyards / Gebruik energie-absorberende verbindingslijnen / Utilice acolladores de absorción de energía / Verwenden Sie falldämpfende Sicherheits-/Anschlagseile / Utilisez des longes à absorption d’énergie / Usar cordas com amortecedor de energia / Utilizzare funi ad assorbimento d’energia / Använd energiupptagande taljerep

www.capitalsafety.com

5A Merse RoadNorth Moons MoatRedditchWorcestershireB98 9HL

2013 INTERTEK ITS10ATEX17038

Technical File No. 70802

Capital Safety Group

II 2 G c IIC T3

TM


Technical Datasheet: 1323Tools List


Hex Swager c/w Die Set 7241119

Hex Swage without Die Set 7241120

Wire Cutters 7241121

Hex Swage Die Set 10mm 7241122

Wire Cable Grip 7241123

8mm Cable Tester Kit 7241124

Eyebolt Tester Kit 7241125

8mm Cable/eyebolt Tester 7241126


All rights reserved. The material contained herein is copyrighted; no part of this publication may be

reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic,

mechanical, photocopying, recording or otherwise without prior written permission from Capital Safety.

EUROPE, MIDDLE EAST & AFRICA

FranceLe Broc CenterZ.I. 1re Avenue – BP1506511 Carros Le Broc CedexFRANCE

t: +33 (0)4 97 10 00 10f: +33 (0)4 93 08 79 70

United Kingdom5a Merse RoadNorth Moons MoatRedditch, WorcestershireB98 9HL UK

t: +44 (0) 1527 548 000f: +44 (0) 1527 591 000

DubaiME Branch Offi cePO Box 17789JAFZA, Dubai – U.A.E

t: 00 800 999 55500f: +33 (0)4 93 08 79 70

GermanyHagener Strasse 44, D-57489, Drolshagen, Germany

t: +49 (0) 2 76 18 33 82 29f: +33 (0)4 93 08 79 70

CUSTOMER SERVICES

[email protected]

00 800 999 55500

GLOBAL LEADER IN FALL PROTECTIONCapital Safety is one of the world’s leading manufacturers of fall protection and rescue equipment, with decades of experience and a legacy of innovation.

We understand the industries we serve and listen to the workers in the fi eld. We employ the best engi-neers to create innovative solutions and patent the products that keep workers safe at heights around the world. Capital Safety has the best quality and largest range of fall protection products in the industry. But we’re more than a product company.

We take an innovative approach in bringing our products to the fi eld. We have created international partnerships and a vast network of authorized distributors, certifi ed installers and service centres. We offer on-site and in-house training.

Look for complete solutions in our extensive line of DBI-SALA® and Protecta® products.

technical datasheets · 2013. 9. 20. · component selection guidelines uni 8™ technical...

Documents