technical data - kemp groep...advance rate of approximately 15 m/min and therefore a milling output...
TRANSCRIPT
-
TECHNICAL DATA
COLD PLANER (Stage V / TIER 4f)BM 500/15-2, BM 600/15-2
-
Tenical data BOMAG BOMAG 500/15-2 600/15-2
Milling DrumMilling width max . ........................................................ mm 500 600Milling depth ................................................................. mm 0 – 210 0 – 210Milling line space .......................................................... mm 15 15Cutting diameter, tools ................................................. mm 700 700Number of Tools ........................................................... St. 58 64Milling drum speed ....................................................... 1/ min variable – 115, 130, 145 variable – 115, 130, 145
Drive TrainEngine Manufacturer ..................................................... Deutz DeutzType ........................................... .................................... TCD4.1 TCD4.1Emission level ......................................... ....................... Stage V / TIER 4f Stage V / TIER 4fCooling ........................................................................... liquid liquidNumber of Cylinders / Displacement ........................... mm3 4 / 4000 4 / 4000Power ........................................................................... kW / hp 105 / 143 105 / 143Idle at rated Power ....................................................... min-1 2.100 2.100Max Torque ................................................................... Nm / min-1 550 / 1.600 550 / 1.600Fuel consumption / max Torque / rated Power .. ........... g / kW 211 / 219 211 / 219Generator ...................................................................... V / A 28 V / 120 A 28 V / 120 ABattery .......................................................................... V / Ah 2 x 12 V / 88 Ah 2 x 12 V / 88 Ah
Driving CharacteristicsTransport speed, 3-wheels ........................................... km/h 0 – 6 0 – 6Transport speed, 4-wheels ........................................... km/h 0 – 10 0 – 10Working speed ............................................................. m/min 0 – 100 0 – 100Min. milling radius 3- and 4-wheels ............................. mm 245 245
WheelsWheel size, rear (Ø x B) ................................................ mm 560 x 254 560 x 254Wheel size, front 3-wheels (Ø x B) ............................... mm 560 x 254 560 x 254Wheel size, front 4-wheels (Ø x B)) .............................. mm 560 x 203 560 x 203
CapacitiesFuel ................................................................................ l 200 200AdBlue .......................................................................... l 30 30Water ............................................................................ l 600 600Hydraulic oil .................................................................. l 100 100
Loading SystemConveyor width ............................................................ mm 400 400Theoretical discharge capacity ..................................... m3/h 85 85Discharge height............................................................ mm 3.850 3.850
WeightsMax. operating weight (incl. options) ............................ kg 9.000 9.200Transportweight, incl. fuel & milling-drum .................... kg 7.300 7.500
Additional weights for optionsCanopy .......................................................................... kg 175 175Splitted scraper ............................................................. kg 50 50Conveyor, long .............................................................. kg 500 500Conveyor, long & hydraulic foldable ............................. kg 550 550Conveyor, short ............................................................ kg 270 270Ballast on front wheels (only 4-wheeler) ....................... kg 120 120
Technical modifications reserved. Machines may be shown with options.
-
28
2.6 BOMAG COLD PLANERS AND THEIR MILLING POWER*
Cold planers can be classifi ed according to their operat-ing weight, engine output, working width and milling depth. This determines the milling performance that is important for the operator. The following diagrams show theoretical area performances* in m²/h for the respective categories of cold planers in relation to the
milling depth, advance speed and asphalt strength. For example, a BM 500/15 compact planer can achieve an advance rate of approximately 15 m/min and therefore a milling output of approximately 450 m²/h on soft asphalt with a milling depth of 4 cm.
BM 500/15 BM 600/15
Working width [mm] 500 600
Operating weight [kg] 7,600 7,700
Milling depth [mm] 0–210 0–210
Table 2: 150 PS class data
2.6.1 150 PS CLASS
milling power BM 500/15
0 2 4 6 8 10 12 14 16 18 20 22 240
2
4
6
8
10
12
14
16
18
20
22
advance rate [m/min]
mill
ing
dept
h [c
m]
theoretical area output [m2/h] 0 50 100 150 200 250 300 350 400 450 500 550 600 650
soft asphalt
hard asphalt
29
milling power BM 600/15
0 2 4 6 8 10 12 14 16 18 20 22 240
2
4
6
8
10
12
14
16
18
20
22
advance rate [m/min]
theoretical area output [m2/h]
mill
ing
dept
h [c
m]
0 50 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800
hard asphalt
soft asphalt
* Note: In practice, the performance specifi cations are affected by the following factors and may deviate from the theoretical specifi cations: millingmaterial, truck waiting times, traffi c hold-ups, road installations such as manhole covers, etc., and the temperature of the road surface. All perfor-mance specifi cations refer to asphalt mix.
2Milling Power: BM 500/15-2 Milling Power: BM 600/15-2
Dimensions [mm]
6.000
-
StandardMilling technology Milling Drum LA15 3 Milling Drum speeds Proportional adjustable water injection Automatic water-saving device Wear-free, digital Milling-depth-display Proportional Milling-depth-adjustment Two proportional speeds for hight-adjustment Additional hight-adjustment at joystick for one-hand-operation Hydraulically operated side-plates Hydraulically operated front mouldboard Rear mouldboard with adjustable pre-load-pressure Right side-plate for fast Drum-exchange Automatic load-control Automatic distribution of traction
Drive train 3-wheel-drive up to 6 km/h 4-wheel-drive up to 10 km/h Right rear wheel foldable from operator place Variable transport speed Variable milling speeds Speed-pre-setting with 12 speeds Mechanical drum drive
Operation comfort Fully vibration-isolated operator-platform Comfort-workstation for sitting operation 7“-full-graphic-display Ergonomic adjustable operator seat Spring loaded, 45° slewing angle Seat-heating Ergonomic adjustable dash-board Height- adjustable arm-rest with integrated ergonomic operation panel Self-explanatory, well-arranged dashboard Large storage at ground level All service- and maintenance-points are concentrated on right-hand side Hydraulic multi-faster-coupling for conveyor operation
Safety & environmental protection Whisper-package for noise elimination Liquid cooled engine following latest emission rules Two driving lights Variable to place working-lights Rotary-beacon Mirror
CE-conform safety-package with emergency- stop-switches Back-up-alarm Vandalism protection
Optional Basic machine Adjustable weather protection roof with plexi- windshields Split rear scraper door Water-filling pump with wash-down function and hose reel Hydraulic hammer connection Antifreeze package Road lights Additional working-light, plug in Additional working-light, magnet base Special colour Bio hydraulic oil Ballast Fleet-management BOMAG TELEMATIC
Quick-change Milling drums Milling drum 600 LA15 POWER DRUM 600 LA20 Fine Milling drum 600 LA6 Milling drum 500 LA15 POWER DRUM 500 LA20 Fine Milling drum 500 LA6 Fine Milling drum 400 LA6 Milling drum 400 LA14 Milling drum 300 LA14 Drain trench drum Cutting wheel
Loading-system Conveyor, long Conveyor, long & hydr. foldable Conveyor, short
Automatic Levelling systems Levelling Basic, 7”Full-graphic-display, controller,
2x sidedoors Levelling Advanced 1, slope sensor Levelling Advanced 2, Sonic Ski with 3 arms
PRE 882 08 010 21082019 Sa
BOMAGHellerwaldD-56154 BoppardPostfach 5162D-56149 BoppardTel. (0)6742 - 1000Fax (0)6742 - 3090