tap it tools - team snubbing

Tap It Tools

Rod Jacking Specialists

A Strategic Partnership with Team Snubbing Services Inc.

Tap It Tools – Care of Team Snubbing Services Inc. Page: 1 / 19

Table of Contents

1.0 Introduction 4

1.1 Scope of Strategic Partnership 4

1.1.1 Tap It Tools 4

1.1.2 Team Snubbing Services Inc. 4

2.0 Innovative Equipment Overview 4

2.1 Engineering 5

5

2.2 Goal Zero Design (Health Safety and Environment) 7

3.0 Case Study Highlights 7

3.1 Placing a well “on Tap” 7

3.1.1 Operations 7

3.1.2 Safety 8

3.1.3 Efficiency 8

3.1.4 Result - Improved Productivity 8

3.2 Suspension of a Pumping Well 9

3.2.1 Operations 9

3.2.2 Safety 9

3.2.3 Efficiency 10

3.2.4 Result - Improved Productivity/lower costs 10

3.3 Polish Rod Changes 10

3.3.1 Operations 10

3.3.2 Safety 11

3.3.3 Efficiency 11

3.3.4 Result - Improved Productivity/Lower Costs 12

3.4 General on-Site Maintenance 12

4.0 Process 13

4.1 Team Snubbing Services Sub Contractor Policy 13

4.1.1 Audit 13

4.1.2 Guidance – QHSE 14

4.1.3 Insurance 14

4.1.4 Security/Patent 15

Tap It Tools – Care of Team Snubbing Services Inc. [email protected] Rick Young - Operations – 1-780-402 1973 Page: 2 / 19

5.0 Available Further Development 15

6.0 Rates 15

7.0 Conclusion 16


1.0 Introduction

With the expansion of innovative and unique services available to our customers, Team Snubbing

Services Inc. has aligned with Tap IT Tools to make available an efficient and effective solutions to

ongoing challenges our customers face day to day.

1.1 Scope of Strategic Partnership

Tap It Tools operates under the Team Snubbing Services Inc. infrastructure with a strategic agreement for future opportunities and development. Tap It Tools will act as a sub-contractor to Team Snubbing

services Inc., with future structures to develop overtime.

1.1.1 Tap It Tools

Tap IT Tools patented and developed a successful solution to general maintenance involving pumping

rods, polish rods, suspensions, and other unique applications.

1.1.2 Team Snubbing Services Inc.

Team Snubbing Services Inc. has established a large customer base and is driven by professionalism, innovation, and dedication to those customers. Team Snubbing Services Inc. operates and manages

several hydraulic based lines of equipment domestically and internationally.

2.0 Innovative Equipment Overview

The Tap It Tool allows for precise and controlled movement of polish rods and sucker rods in general.

The following applications of the tool have proven to be successful:

1) Placing wells “On Tap” 2) Suspension of pumping wells

3) Polish Rod Changeouts

4) General surface maintenance

General benefits to the customer through use of this tool are detailed in the case studies below but

include:

1) Safer handling of surface equipment – Less risk to personal

2) Cheaper and more efficient operations 3) Less impact to the environment 4) Ability to access remote or isolated areas

The innovation included in the design of the Tap It Tool allows for universal applications – with minimal

equipment and support needed – therefore passing savings to the customer.


2.1 Engineering

Throughout the design and manufacturing process, the structure of the equipment has been engineered for load and use as per design. Factory testing along side field testing has proven this technology

robustly.


2.2 Goal Zero Design (Health Safety and Environment)

With the use of the 12V powerpack and charging station the use of the equipment is in line with zero carbon emission goals. The ability for operation outside the immediate area eliminates risk to personal.

Both initiatives are in line with creating a safe and environmentally friendly working environment.


3.0 Case Study Highlights

3.1 Placing a well “on Tap”

3.1.1 Operations

The design of the tool allows the operator precise control while putting wells “On Tap”. The ability to

precisely locate and set rod strings properly inside the downhole pump – Allowing full operation of the

pump and maximizing productivity

Steps of the operation:

1) Arrive on location and perform site assessments, complete risk analysis, complete work permits. 2) Position, Lock out, and secure pump Jack

3) Record SITP and SICP, Calculate String Weights and necessary parameters 4) Rig in Tap It Tool


5) Pick up on string and monitor string weight

6) Loosen Top clamp and lower rod string to set on slight tap 7) Tighten top clamp and secure rod string onto pump jack carrier bar 8) Lower Tap it tool and remove tools carrier bar, clear tool rams below stuffing box.

9) Turn well over to operator. Start pumpjack When gas lock is removed from bottom hole pump.

10) Shut down, lock out, secure pumpjack 11) Position tool rams install tool carrier bar.

12) Hoist rod string the desired length off tap. 13) Secure rod string in pumpjack carrier bar. 14) Rig out Tap it tool. 15) Close work permits

16) Turn well over to operations.

3.1.2 Safety

Use of the tool securely positions and maintains control of the rod string. Adjustments to the pump jack

can be performed without the risk of pinch points and hanging weight. This isolates the risk and challenges that arise while adjusting the movement of the pump jack. Utilization of Team Snubbing Services strong QHSE management system and guidance provides the ability to continue to work safely

with respect to all aspects including Quality, Health and the Environment.

3.1.3 Efficiency

The unit is installed and operational within minutes upon arrival and site review. The entire operation of

precisely placing the well “On Tap” can take under a half an hour on site.

3.1.4 Result - Improved Productivity

The ability to precisely position the rod string into the downhole pump creates maximum use and longevity of that pump. Stroking the rod string without any hammer effect on the pump reduces

ongoing damage created by jarring. The condition of both the rod string as well as the downhole pump will improve. The wear and tear on all equipment will be reduced, and therefore overall maintenance on

the well entirely will be reduced over time.

Production will be enhanced due to the absolute maximum use of the equipment.

3.2 Suspension of a Pumping Well

3.2.1 Operations

The design of the tool allows the operator precise control while handling the polish rod and surface rods. The ability to efficiently jack necessary rods to hang a string for a suspension eliminates the costs


associated with conventional equipment. The package simplifies the process and requires significantly

less time on site.


1) Arrive on location and perform site assessments, complete risk analysis, complete work permits. 2) With pumpjack not in service, lockout and secure pumpjack with chain and boomer 3) Read and record well pressures. Spot and rig in mini flare stack. Bleed off tbg pressures and csg

pressure. Spot and rig in pressure truck for well control. Fill and pressure test tbg for future possibilities. Note this on daily report.

4) Build Tap it tool. Remove cable guard on horsehead. 5) Start to jack out polish rod, after pump stroke out unseating actions will follow.

Note this on daily report.

6) With pump unseated, pump required amount of kill fluid. Tubing dead. Casing venting.

7) Lower rod string right down till all weight is standing in well. Close in rod bop. With well dead should not have any gas to bleed off.

8) Remove polish rod pick pony, rod rotator and stuffing box. 9) Strip on rod bop (Regan) and secure to well. Hook up hose and close Regan bop. Open rod bop

(Rattigan) Well should still be dead. Open rod bop (Regan)

10) Jack polish rod out of well to polish rod and sucker rod connection. Install rod elevator. Break connection but leave butted up. Picker with polish rod pick up elevator will be connected to polish rod while jacking out of hole.

11) Continue to monitor well. 12) Pick up on rod string, break out all wellhead above tubing bonnet. Lower rod string, with 2 straps

connected to Tap it tool and wellhead.

13) Pick up on wellhead. Install suspension tool and hang rod string on suspension tool. Currently continue to monitor well.

14) Lay down wellhead and polish rod. Rig out Tap it tool and secure well with Master valve and

nightcap. 15) Rig out all equipment.

16) Close all work permits

3.2.2 Safety





3.2.3 Efficiency


suspending a well can be performed in under XXXX with normal operating conditions.

The ability to utilize simplified and basic techniques with innovative technology allows upmost efficiency

in the operation.

3.2.4 Result - Improved Productivity/lower costs

The operation of utilizing this tool in comparison to an alternative will reflect significant savings to the

customer. In both time and cost the referenced savings from reviews are as follows:

1) A decrease of up to 45% time needed to perform the operation.

2) A decrease of up to 60% cost from similar operations.

3.3 Polish Rod Changes

3.3.1 Operations

The design of the tool allows the operator precise control while handling the polish rod and surface rods. The ability to efficiently jack necessary rods to hang a string for a suspension eliminates the costs associated with conventional equipment. The package simplifies the process and requires significantly

less time on site.


1) Arrive on location and perform site assessments, complete risk analysis, complete work permits. 2) Shut down, lock out and secure pumpjack. 3) Read and record SITP and SICP pressures

Note this on daily report. 4) Rig in mini flare stack if required. Most facilities will have bleed off methods. Rig in pressure truck

for well control. Measure from top of upper clamp to bottom of coupler on pick up pony. (This gives you the exact placement of rod string and making it easier for setting off tap when job

completed) 5) Bleed off Casing and Tubing. 6) Perform Pre-Job Calculations. (Set Parameters)

7) Rig in Tap it tool. 8) Lower bottom clamp and pick up on rod string. 9) Remove top clamp, and tie back carrier bar and horsehead bridle. (Remove from working area)

Leave cable guard on horsehead for unseating pump. 10) With well bled off, fill tubing and pressure test tubing to predetermined limits. Confirm 15 min

test is solid. Bleed off.

Note on daily report. 11) Jack rod string out to unseating action.


Note string weight and unseating weight on daily report.

12) With pump unseated, pump required fluid for well control. Continue to vent casing. Ensure Well is dead

13) Lower rod string till all weight is standing in well. Remove cable guard from horsehead.

14) Close in rod bops(Rattigan) Strip off pick up pony on polish rod, rod rotator, stuffing box. Install rod bop (Regan type) Secure, install hose and close bop (Regan). Open rod bop (Rattigan) Well should still be dead. Open rod bop (Regan)

15) With complete well control, install polish rod pickup clamp and picker. Jack polish rod out of hole to connection. Install sucker rod elevator, break out polish rod and lay down.

16) Pick up and install new polish rod. Lower back down to rods standing in well. Confirm

bottomhole pump seated. 17) Close rod bop (Rattigan) Strip off rod bop (Regan type) remove pick up pony, install stuffing box,

rod rotator, pilot bushing, pick up pony for polish rod. Top up Tubing with kill fluid and pressure test tubing to predetermined limes.

18) Confirm pump seated. (If unable to establish pressure test then may have to put well on slight tap and let pumpjack tap pump seats in nipple)

19) Set rod string required length of tap. (Confirm initial measurement from first step)

20) Hang rod string from bridle carrier and secure rod string. 21) Rig out all equipment and turn well over to operations.

22) Close work permits.

3.3.2 Safety




3.3.3 Efficiency


suspending a well can be performed in under XXXX with normal operating conditions.

The ability to utilize simplified and basic techniques with innovative technology allows upmost efficiency

in the operation.

3.3.4 Result - Improved Productivity/Lower Costs

The operation of utilizing this tool in comparison to an alternative will reflect significant savings to the customer. In both time and cost the referenced savings from reviews are as follows:

1) A decrease of up to 45% time needed to perform the operation.


2) A decrease of up to 60% cost from similar operations.

3.4 General on-Site Maintenance

The use of tool allows the equipment and personal to also be involved when needed for any other onsite

maintenance and/or housekeeping.

The equipment available to our customers while in operation can assist with several other activities

needed, to limit the need for other services to be called out.

Any other projects that we can accomplish with the use of our equipment can be dealt with on a

case-by-case basis.


4.0 Process

4.1 Team Snubbing Services Sub Contractor Policy

4.1.1 Audit

Team Snubbing Services ensures Tap It Tools remains a verified and competent vendor under our robust Sub Contractors policy. Team Snubbing services will make the audits available upon any request from

our customers.


4.1.2 Guidance – QHSE

Team Snubbing Services Inc. QHSE management system working hand in hand with Tap IT Tools will

provide necessary guidance to ensure customer satisfaction, delivery of product, and overall operational

excellence.

Tap it tools utilizes Team Snubbing Inc.’s Electronic based forms VIA E-compliance, and utilizes its proven

on site FHA, JSA,SOP document template to ensure all risks are identified.

4.1.3 Insurance

Tap It Tools carries applicable vehicle insurance and wellhead insurance as per requirements of Team

Snubbing’s Sub Contractor Policy.


4.1.4 Security/Patent

Tap IT Tools have ensured protection of the technology through US and Canadian Patents Pending. The

significance of the value this tool can deliver to the customer is represented by this security.

5.0 Available Further Development

The requirement for a safer and effective tool to assist in maintenance and optimization of existing challenges is identified. Team Snubbing Services and a strategic partnership with Tap It Tools inc. intend

to deliver further advancements to the industry and our valued customers.


6.0 Rates

Rates are to be negotiated upon further discussion with specific customers. Long term volume rates will

be best suited, however load and go general rates can be presented as follows:

7.0 Conclusion

It is with great pride that together Team Snubbing Services Inc. and Tap It Tools can deliver our skills, knowledge, and product to our customers. To become a part of our customers success is our drive. We want to continue to deliver operational excellence through the services we can provide and be a part of

your TEAM.

Please Contact at any time for further information or discussion:


Item Cost

Package Hourly Rate (4-hour Min) $320.00/Hour

Travel (Included in the day’s total

hours)

Included

Operator Wage Included

Assistant $85.00/Hour

Man, Day Subsistence Included

Consumables $35.00/Day

Fuel Included

Out of Town

Accommodations/Subsistence

$250.00/Man/Nigh

t

Stat Holiday $160.00/Hour

Rick Young – Operations – [email protected]

Mobile: 1-(780)- 402-1973

Mike Watts – Business Development – [email protected]

Mobile: 1-(780)-512-5130


mailto:[email protected]

mailto:[email protected]

tap it tools - team snubbing

Documents