table of contents - land pride · 2014-03-20 · aerators, core table of contents features and...

Table of Contents

LP_2200 Features & Benefits 3/20/14

Land Pride

Table of Contents (Continued on next page)Table of Contents (Go to 2nd Page)

Table of Contents

Aerators, . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Core . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

CA05 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1CA15 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2CA25 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Pasture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4AR2596 & AR2510 Models . . . . . . . . . . . . . . . . . 4

All Flex Mowers . . . . . . . . . . . . . . . . . . . . . 5AFM4211 Models . . . . . . . . . . . . . . . . . . . . . . . . 5AFM4214 & AFM4216 Models . . . . . . . . . . . . . . 6AFM4522 Model . . . . . . . . . . . . . . . . . . . . . . . . . 7

Angle Broom . . . . . . . . . . . . . . . . . . . . . . . 8Model AB84 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Bale Spears . . . . . . . . . . . . . . . . . . . . . . . . 9BS & BSE Series . . . . . . . . . . . . . . . . . . . . . . . . . 9

Blades, . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

TB2596 & TB25108 Models . . . . . . . . . . . . . . . 10

Rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11RB05 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . 11RB15 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . 11RB16 & RB26 Series . . . . . . . . . . . . . . . . . . . . . 12RB37 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . 13RBT35 Series . . . . . . . . . . . . . . . . . . . . . . . . . . 14RBT40 Series . . . . . . . . . . . . . . . . . . . . . . . . . . 15RBT45 Series . . . . . . . . . . . . . . . . . . . . . . . . . . 16RBT55120 Model . . . . . . . . . . . . . . . . . . . . . . . 17RBT60 Series . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Box Scrapers . . . . . . . . . . . . . . . . . . . . . . 19BB05 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . 19BB12 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . 20BB15 & BB25 Series . . . . . . . . . . . . . . . . . . . . . 21MR15 & HR25 Series (Retractable) . . . . . . . . . 22HRL3578 & HR3584 Models (Retractable) . . . . 23

Compact Drills . . . . . . . . . . . . . . . . . . . . . 243P500 & 3P600 Models . . . . . . . . . . . . . . . . . . 243P500V Model . . . . . . . . . . . . . . . . . . . . . . . . . 24606NT Model . . . . . . . . . . . . . . . . . . . . . . . . . . 253P606NT Model . . . . . . . . . . . . . . . . . . . . . . . . 25800 Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263P806NT Model . . . . . . . . . . . . . . . . . . . . . . . . 273P1006NT Model . . . . . . . . . . . . . . . . . . . . . . . 28

Disc Harrows . . . . . . . . . . . . . . . . . . . . . . 29DH10 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . 29DH15 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . 29DH25 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . 30DH35 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

© Copyright 2013 All rights Reserved

Land Pride provides this publication “as is” without warranty of any kind, either expressedPride assumes no responsibility for errors or omissions. Neither is any liability assumed forthe right to revise and improve its products as it sees fit. This publication describes the stat

Land Pride is a reg

All other brands and product names are trademarks

Printed in the United

Ditchers . . . . . . . . . . . . . . . . . . . . . . . . . . 32DT35 Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32DT55 & DTM55 Models . . . . . . . . . . . . . . . . . . . 33

Drag Harrows . . . . . . . . . . . . . . . . . . . . . . 34DRG Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Drag Scraper . . . . . . . . . . . . . . . . . . . . . . 35BB4596, BB4510 & BB4512 . . . . . . . . . . . . . . . 35

Flail Mowers . . . . . . . . . . . . . . . . . . . . . . . 36FM21 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . 36FM31 & FM41 Series . . . . . . . . . . . . . . . . . . . . . 37

Grading Scrapers . . . . . . . . . . . . . . . . . . . 38GS15 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . 38GS25 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Grapples, . . . . . . . . . . . . . . . . . . . . . . . . . 40Claw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

SGC0548 Model . . . . . . . . . . . . . . . . . . . . . . . . 40SGC10 Series . . . . . . . . . . . . . . . . . . . . . . . . . . 41SGC15 Series . . . . . . . . . . . . . . . . . . . . . . . . . . 42SGC20 Series . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Manure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44SGM15 Series . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Rock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45SGR15 Series . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Skeleton . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46SGS15 Series . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Grapple Buckets, . . . . . . . . . . . . . . . . . . . 47Rock & Skeleton . . . . . . . . . . . . . . . . . . . . . 47

SRB15 & SSB15 Series . . . . . . . . . . . . . . . . . . 47

Grooming Mowers, . . . . . . . . . . . . . . . . . 48Rear Discharge . . . . . . . . . . . . . . . . . . . . . . 48

FDR16 Series . . . . . . . . . . . . . . . . . . . . . . . . . . 48FDR25 Series . . . . . . . . . . . . . . . . . . . . . . . . . . 49FDR3690 Model . . . . . . . . . . . . . . . . . . . . . . . . 50

Hydraulic Reservoir System . . . . . . . . . . 51HRS18 & HRS23 . . . . . . . . . . . . . . . . . . . . . . . . 51HRS3025 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Landscape Rakes . . . . . . . . . . . . . . . . . . . 53LR05 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53LR16 & LR26 Series . . . . . . . . . . . . . . . . . . . . . 54LR36 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Pallet Forks . . . . . . . . . . . . . . . . . . . . . . . 56PF10 & PF20 Series . . . . . . . . . . . . . . . . . . . . . 56PFL20, PFL30, PFL45, PFL55, & PFL64 Series 57

or implied. While every precaution has been taken in the preparation of this manual, Landdamages resulting from the use of the information contained herein. Land Pride reserves

e of this product at the time of its publication, and may not reflect the product in the future.

istered trademark.

or registered trademarks of their respective holders.

States of America.

6/25/13

Table of Contents

Table of Contents (Go to 1st Page) Land Pride

Post Hole Diggers, . . . . . . . . . . . . . . . . . . 58PTO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

PD10 Model . . . . . . . . . . . . . . . . . . . . . . . . . . . 58PD15 Model . . . . . . . . . . . . . . . . . . . . . . . . . . . 58PD25 & PD35 Model . . . . . . . . . . . . . . . . . . . . . 59

Hydraulic . . . . . . . . . . . . . . . . . . . . . . . . . . . 60HD25 & HD35 Series (3-Point) . . . . . . . . . . . . . 60SA35 Model (Skid Steer) . . . . . . . . . . . . . . . . . . 61

Powered Rakes . . . . . . . . . . . . . . . . . . . . 62PR16 Series (3-Point) . . . . . . . . . . . . . . . . . . . . 62SR26 Series (Skid Steer) . . . . . . . . . . . . . . . . . 63

Quick Hitches . . . . . . . . . . . . . . . . . . . . . . 64QH15 & QH20 Series . . . . . . . . . . . . . . . . . . . . 64SH35 Series (Skid Steer) . . . . . . . . . . . . . . . . . 65

Rotary Cutters, . . . . . . . . . . . . . . . . . . . . . 66Single Deck . . . . . . . . . . . . . . . . . . . . . . . . . 66

RCD1884 Model . . . . . . . . . . . . . . . . . . . . . . . . 66RCF2060 & RCF2072 Models . . . . . . . . . . . . . . 67RCF2084 Model . . . . . . . . . . . . . . . . . . . . . . . . 68RCF2760 & RCF2772 Models . . . . . . . . . . . . . . 69RCF2784 Model . . . . . . . . . . . . . . . . . . . . . . . . 70RCF3096 & RCF(M)3010 Models . . . . . . . . . . . 71RCF3660 & RCF3672 Models . . . . . . . . . . . . . . 72RCF3684 Model . . . . . . . . . . . . . . . . . . . . . . . . 73RCF(M)3696 & RCF(M)3610 Models . . . . . . . . 74RCR12 Series . . . . . . . . . . . . . . . . . . . . . . . . . . 75RCR15 Series . . . . . . . . . . . . . . . . . . . . . . . . . . 76RCR1860 & RCR1872 Models . . . . . . . . . . . . . 77RCR1884 Model . . . . . . . . . . . . . . . . . . . . . . . . 78RCR2596 & RCR25(M)10 Models . . . . . . . . . . . 79RCR2660 and RCR2672 Models . . . . . . . . . . . 80RCR2684 Model . . . . . . . . . . . . . . . . . . . . . . . . 81RCP(M)26 & RCP(M)30 Series (Parallel Arm) . 82SC26 Series (Skid Steer) . . . . . . . . . . . . . . . . . 83

Folding Deck . . . . . . . . . . . . . . . . . . . . . . . . 84RC2512 Model . . . . . . . . . . . . . . . . . . . . . . . . . 84RC2515 Model . . . . . . . . . . . . . . . . . . . . . . . . . 85RC3614 & RCM3614 Models . . . . . . . . . . . . . . 86RC3615 and RCM3615 Models . . . . . . . . . . . . . 87RC3620 & RCM3620 Models . . . . . . . . . . . . . . 88RC4015 and RCM4015 Models . . . . . . . . . . . . . 89RC5014 & RCM5014 Models . . . . . . . . . . . . . . 90RC5020 & RCM5020 Models . . . . . . . . . . . . . . 91RC(M)5510 & RC(M)6510 Models . . . . . . . . . . 92RC(M)5515 & RC(M)6515 Models . . . . . . . . . . 93RC(M)5610 & RC(M)6610 Models . . . . . . . . . . 94RC(M)5615 & RC(M)6615 Models . . . . . . . . . . 95RCB6610 & RCBM6610 Models . . . . . . . . . . . . 96RCB6615 & RCBM6615 Models . . . . . . . . . . . . 97

Rotary Tillers . . . . . . . . . . . . . . . . . . . . . . 98RTR05 Series . . . . . . . . . . . . . . . . . . . . . . . . . . 98RTA12 Series . . . . . . . . . . . . . . . . . . . . . . . . . . 99RTR12 Series . . . . . . . . . . . . . . . . . . . . . . . . . 100RTA15 Series . . . . . . . . . . . . . . . . . . . . . . . . . 101RTR15 Series . . . . . . . . . . . . . . . . . . . . . . . . . 102RTA20 & RTR20 Series . . . . . . . . . . . . . . . . . 103RTA25 & RTA35 Series . . . . . . . . . . . . . . . . . . 104RTR2570 Model . . . . . . . . . . . . . . . . . . . . . . . 105

Scarifiers . . . . . . . . . . . . . . . . . . . . . . . . 106SF25 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . 106

Seed Bed Roller . . . . . . . . . . . . . . . . . . . 107SBR Series . . . . . . . . . . . . . . . . . . . . . . . . . . . 107

Seeders, . . . . . . . . . . . . . . . . . . . . . . . . . 108All Purpose Seeder . . . . . . . . . . . . . . . . . . 108

APS15 Series . . . . . . . . . . . . . . . . . . . . . . . . . 108

Food Plot Seeder . . . . . . . . . . . . . . . . . . . 109FPS48 Plot Ranger . . . . . . . . . . . . . . . . . . . . . 109

Electric Spin Spreader . . . . . . . . . . . . . . . 110Electric Spin Spreader . . . . . . . . . . . . . . . . . . . 110

Overseeder . . . . . . . . . . . . . . . . . . . . . . . . 111OS15 Series . . . . . . . . . . . . . . . . . . . . . . . . . . 111

Primary Seeder . . . . . . . . . . . . . . . . . . . . . 112PS1572 Model . . . . . . . . . . . . . . . . . . . . . . . . . 112PSN2096 Model . . . . . . . . . . . . . . . . . . . . . . . 113PS25120 Model . . . . . . . . . . . . . . . . . . . . . . . . 114

Spreaders . . . . . . . . . . . . . . . . . . . . . . . . . 115FSP500, FSP700 & FSP1000 Models . . . . . . . 115PFS4000, PFS5060 & PFS8010 Models . . . . . 116PTS500 & PTS700 Models . . . . . . . . . . . . . . . 117

Snow Blowers . . . . . . . . . . . . . . . . . . . . 118SB10, SB15, & SB25 Series . . . . . . . . . . . . . . 118SBD3596 & SBD35108 Models . . . . . . . . . . . . 119

Soil Pulverizers . . . . . . . . . . . . . . . . . . . 120SP20 & SP30 Series . . . . . . . . . . . . . . . . . . . . 120

Spike Tooth Harrows . . . . . . . . . . . . . . . 121STH1590 Model . . . . . . . . . . . . . . . . . . . . . . . 121STH2024 Model . . . . . . . . . . . . . . . . . . . . . . . 122

Straw Crimpers . . . . . . . . . . . . . . . . . . . 123CR25 Series . . . . . . . . . . . . . . . . . . . . . . . . . . 123

Stump Grinders, . . . . . . . . . . . . . . . . . . . 124Skid Steer . . . . . . . . . . . . . . . . . . . . . . . . . 124

SSG2524 Model . . . . . . . . . . . . . . . . . . . . . . . 124

Wood Chippers . . . . . . . . . . . . . . . . . . . 125WC1503 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125WC1504 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126

Zero Turn Mowers . . . . . . . . . . . . . . . . . 127Z48, Z54, ZSR54 & ZSR60 Models . . . . . . . . . 127ZST40 & ZST48 Models . . . . . . . . . . . . . . . . . 129ZT360 & ZT372 Models . . . . . . . . . . . . . . . . . . 131

6/25/13

Table of Contents
Aerators,Core
Features and Benefits

Aerators, CoreCA05 Series

Features Benefits

Pull Type Clevis Hitch Fits behind any small tractor, lawn tractor, utility vehicle or ATV with a pull tongue.

3 Sizes 40", 48" & 56" Great sizes for residential home owners and other light applications.

Formed 10 Ga. end panelsand center supports

Offers good strength and appearance.

Formed 12 Ga. weight tray with drainholes

Adds safety over spoon area, doesn’t allow foreign weight object to fall into spoonarea, keeps cores from being thrown forward.

16 Ga. x 1/2" I.D. hardened springsteel spoons with beveled edge

Penetrates the ground easier than spoons constructed of a heaver gage materialand/or larger diameter bodies.

Individual Spoon Replacement Requires removal of only two bolts to replace a worn-out spoon. Don’t have todisassemble the whole rotor section to get to the spoons.

Gang greasing Each gang has a grease zerk for smooth rotation.

8 1/2" Spoon spacing (forward travel)4" Spoon spacing laterally

Offers optimum core pulling pattern & aeration.

4.2 Aeration cores per sq. ft. Provides good aeration per square foot.

Weight tray Additional weight can be easily added to the aerator.

Designs, specifications, features and information are subject to change without notice.

1325-108F11/25/09


Table of Contents


Features Benefits

Cat. 0, Cat. 1 andCat. 1 Limited Hitch

Fits many of the smaller tractors and fits Land Pride Quick-Hitch

4 Sizes 48", 56", 64" & 72" Great sizes for small landscapers, golf courses, campuses and cities.

Formed 10 Ga. mainframe androtary supports

Formed 10 Ga. plates offers good strength and appearance.

Expanded metal in weight tray Adds safety over spoon area, doesn’t allow foreign weight object to fall into spoonarea, keeps cores from being thrown forward.

16 Ga. x 1/2" I.D. harden springsteel spoons with beveled edge

Penetrates the ground easier than spoons constructed of a heaver gage materialand/or larger diameter bodies.

Individual Spoon Replacement Requires removal of only two bolts to replace a worn-out spoon. Don’t have todisassemble the whole rotary section to get to the spoons.

4 1/2" Gang spacing Offers optimum core pulling pattern.

Spoon gangs Spoon gangs are independent of each other allowing for less side load torque on eachgang and tearing of the turf during turns.

Spoon gang greasing Each gang has a grease zerk for smooth rotation.

3 - Storage stands Keeps the spoons off the ground while in storage and aids in hooking-up to the tractor.

6 3/16" Spoon spacing – forwardtravel

Offers optimum aeration.

48" = 4.5 Aeration cores per sq. ft.56" = 4.7 Aeration cores per Sq. ft.64" = 4.8 Aeration cores per Sq. ft.72" = 5.0 Aeration cores per Sq. ft.

Provides good aeration per square foot.

Weight tray Additional weight can be easily added to the aerator.


2

Table of Contents



Features Benefits

2 Sizes 60" & 72" Great sizes for small landscapers to golf courses, campuses, cities.

Cat. 1 Hitch Fits Land Pride Quick-Hitch, and stout enough to work with any Cat. 1 tractor.

Plate steel ‘A’ frame Plate steel offers greater strength from natural force applied downward from tractor toplink.

Tubular Construction 2 1/2" x 2 1/2" x 3/16" Tubing vs. angle iron offers greater strength as well as gives abetter appearance.

Expanded metal in weight tray Adds safety over spoon area, doesn’t allow foreign weight object to fall into spoonarea, keeps cores from being thrown forward.

Hardened steel spoons 3/4" ID spoons, with 3 mm wall thickness and beveled edge penetrate the groundeasier than thicker OD spoons, but are just as strong.

Individual Spoon Replacement Requires removal of only two bolts to replace a worn-out spoon. Don’t have todisassemble the whole rotary section to get to the spoons.

5 1/2" Gang spacing on 60" units6 1/2" Gang spacing on 72" units

5 1/2" on 60" Units, 6 1/2" on 72" unit offers optimum core pulling pattern.

Spoon gangs Spoon gangs are independent of each other allowing for less side load torque on eachgang and tearing of the turf during turns.

Spoon gang greasing Each gang has a grease zerk for smooth rotation.

Storage stands Each corner has a storage stand to aid in off the ground storing, as well as aiding inhooking to the tractor.

Spoon spacing – forward travel 7" Spacing in forward travel offers optimum aeration.

Sq. foot aeration 4 Cores per sq. ft. on 72" unit, and 6 cores per sq. ft. on 60".

Optional Water Tanks Easily add up to 490 lbs. to the 60" and 600 lbs. to the 72" to aid in compacted soilconditions. Can easily reduce weight by draining tank incrementally. Water tanks aresafer due to precise fit and fastening vs. stacking inconsistent sized objects anddifficulty in uniform fastening.


3325-020F6/22/11

Table of Contents
Pasture

Aerators, PastureAR2596 & AR2510 Models

Features Benefits

All Welded 4 x 4 Tubing Frame Makes for a very strong frame.

4 x 4 x 5/16 TongueWith Clevis Hitch

Built heavy duty to withstand side loads from the tines.

Forged & Heat Treated ThroughSteel Tines

Forged and heat treated tines are very resistant to wear and breakage giving them along life.

Tines Tines are designed with a twist to lift while fracturing the soil sideways.

Bolt-on Tines (2 Bolts Per Tine) Tines are easily replaceable with 2 bolts per tine.

8" Maximum Tine Penetration Great penetration for aerating the soil.(Actual penetration depth is dependent on ground condition and added weight.)

Heavy Duty Rotary Tine Hangers Designed to stand up to the rigors of hard rocky soil.

Bearings Are Protected With3/8" Skid Shoes on 3-Sides

Protects bearings against hitting solid objects such as rocks and stumps.(Skid shoe protection is located on the front, bottom and back sides of bearings)

Adjustable Rotors Rotors can be adjusted from 2 1/2, 5 and 7 1/2 degrees to meet customers needs.The greater the angle the harsher the shattering of soil.

7 1/2" Tine Spacing (4/per Spool)AR2596 = 48 Tines TotalAR2510 = 64 Tines Total

Tines spaced 7 1/2" apart provides good coverage.

Optional Weights Constructed of740 lbs. Concrete Blocks WithLifting Lugs Built In

AR2596 accepts up to 3 concrete blocks and AR2510 accepts up to 4 concrete blocks.Helps Aerator tines penetrate the ground.

Optional Harrow Lift Package Lifts the Drag Harrow off the ground for transporting on roadways.

Accessory Drag Harrow Provides a means to smooth out the ground behind the Aerator. Drag Harrow hasthree positions it can be used: Drag Mat, Light Penetration & Deep Penetration.

Accessory Trailing Hitch Hitch is self leveling for pulling implements behind the Aerator.


4325-127F6/22/11

Table of Contents
All Flex Mowers

All Flex MowersAFM4211 Models

Features BenefitsCounter blade rotationon left hand deck

Spreads grass clippings more evenly. Wing decks throw grass away from the reardeck. Rear deck doesn’t get covered up nor does it get bogged down by cut grass.

7'-8" transport widthat lowest cutting height

Meets most city/county codes for transport width.

6" Deck overlap Eliminates skipping when going into a tight turn.11'-1" Cutting width – three 48" decks Sized right for golf courses, cities, schools. Small decks give excellent flexibility.Sleek frame design, including singlebeam hitch and compact deck overlap

Design allows operator to make tighter turns without leaving windrows and skips.AFM virtually becomes a zero turn mower. (Oversized tires may not allow this.)

Automatic transport wing locks When wings are raised in the full transport position, the wings lock in place. Noneed to get off the tractor to lock. Pull rope from tractor seat to un-lock.

18" Transport tireswith tapered roller bearings

Transport tires offer smooth roading and less grass compaction. Allows grass tostand up. Tapered roller bearings offer longevity.

Removable transportation tire spindles Allows a spindle to be replaced by simply removing two bolts.Back wheels on side decks even withtransportation tires

Allows tighter turns without skips.

Rigid rear side deck tires. Rigid wheel yokes holds hills and slopes better. Safer unit than the competition.13" Deck tires with sealant 13" Tires offer great flotation, less lbs. per square inch. Sealant minimizes flats.1/4" Gauge wheel arms Gives the cutter gauge wheel arms a great deal of “hidden” strength.Low pivot points on deck The lower the pivot points are to the ground, the more side to side swing, allowing

for excellent flotation from each deck.Deflectors built into mower decks Safety features meet ANSI standards. Many competitors use chains for protection.

Once chains are removed the unit does not meet ANSI specifications.Rear discharge Even dispersal, discharged items are aimed downward. No rear chains are

needed, which tend to clump damp grass.Rounded front deck edgeswith no protruding skid shoe

Helps protect trees and other obstacles.

5/16" Front edge & all-welded seams Provides extra durability.Cat. 3 Constant velocity main driveline Constant velocity main driveline allows for tighter turns without harming U-joints in

driveline, includes slip clutch option.Cat. 2 wing drivelines Reduces start-up torque that is put on the driveline, gearbox and gearbox support.Slip-clutch protection Guards against premature gearbox failure. Protects mower deck spindles.ABS guards No paint to scratch off, lighter weight, no rattling or rust.Heavy gearbox mounts on centerand side mower decks

Handles start-up torque better.

Gearbox HP Rating 30 -65 HPGearbox warranty 5 years on parts and labor.

Demonstrates our confidence in the gearbox’s quality and lasting performance.Easy to grease blade spindles No guards to remove for routine greasing of blade spindles.Middle spindle sits towardsthe back of the mower deck.

Uses less horsepower and allows material to escape the mower deck easier. Thedischarge of material is more even. Design eliminates windrowing.

Spring loaded idlers Applies constant tension to belt to run efficiently.Easy belt tension release Easily release belt tension for changing belt or for winter storage.High blade tip speed (16,260 fpm) Lifts grass up for a clean cut and efficient discharge of material.

Tip speed rates are as high or higher than the competition.Choice of Blade(Medium lift standard)Others available thru parts dept.

Low Lift - Highly recommended in sandy soils where lifting isn’t crucial. Disturbsthe soil very little, allowing blades to wear longer.Medium Lift - Medium suction for lifting grass. Requires less HP than high lift.High Lift - Greatest suction for lifting grass before cutting. Can take higher HP intall dense grass. Not recommended in sandy soils.Mulching - Perfect for leaf mulching.

Optional Hydraulic Operated TransportLocks

Transports locks can be released easily from the tractor seat while operating thesame tractor control lever that raises and lowers the mower decks. Eliminatespulling a rope to release transport locks.


5315-507F4/01/13


Table of Contents

All Flex MowersAFM4214 & AFM4216 Models

Features BenefitsCounter rotation on left hand deck Spreads grass clippings more evenly. Wing decks throw grass away from the rear

deck. Rear deck doesn’t get covered up nor does it get bogged down by cut grass.Narrow 6'-8" transport width Not much wider than most tractors, making for safer transport. Meets most city/

county codes for transport width6" Deck overlap (AFM4214)8" Deck overlap (AFM4216)

Eliminates blade skips when turning. Tighter turns can be made.Allows for maximum amount of wing deck flex.

Sleek frame design, including singlebeam hitch and compact deck overlap

Design allows operator to make tighter turns without leaving windrows and skips.The AFM virtually becomes a zero turn mower.

Automatic transport wing locks When wings are raised in the full transport position, the wings lock in place, noneed to get off the tractor to lock. Pull rope from tractor seat to unlock.

23" Transport tireswith tapered bearings

23" Transport tires offer smooth roading and less grass compaction. Allows grassto stand up. Tapered roller bearings offer longevity.

Removable transportation tire spindles Allows a spindle to be replaced by simply removing two bolts.Back wheels on side decks even withtransportation tires


Rigid rear side deck tires Rigid wheel yokes holds hills and slopes better. Safer unit than the competition.Large deck flotation tires with sealant Optional 15" tires for great flotation or 18" tires for even greater flotation. The larger

the tire the less compaction in pounds per square inch allowing grass to stand up.Sealant in the tires minimizes flats.

1/4" Gauge wheel arms Gives the cutter gauge wheel arms a great deal of “hidden” strength.Low pivot points on deck The lower the pivot points are to the ground, the more side to side swing, allowing

for excellent flotation from each deck.Deflectors built into mower decks Safety features meet ANSI standards. Many competitors use chains for protection.

Once chains are removed the unit may not meet ANSI specifications.Rear discharge Even dispersal, discharged items are always aimed downward. No rear chains are

needed, which tend to clump damp grass.Cat. 4 CV main driveline Constant velocity main driveline allows for tighter turns without harming U-joints in

driveline, iIncludes slip clutch.Cat. 2 wing drivelines Reduces start-up torque that is put on the driveline, gearbox and gearbox support.Slip clutch protection Guards against premature gearbox failure. Protects mower deck spindles.Heavy gearbox mounts on centerand side mower decks

Handles start up torque.

Gearbox HP Rating 40 - 70 HPGearbox warranty 5 years on parts and labor.

Demonstrates our confidence in the gearbox’s quality and lasting performance.Easy to grease blade spindles No guards to remove for routine greasing of blade spindles.Middle spindle sits towardsthe back of the mower deck.

Uses less horsepower and allows material to escape the mower deck easier. Thedischarge of material is more even. Design eliminates windrowing.

Spring loaded idlers Applies constant tension to belt to run efficiently.Easy belt tension release Easily release belt tension for changing belt or for winter storage.High blade tip speed (AFM4214 = 18,396 fpm & AFM4216 = 18, 340 fpm) Lifts grass up for a clean cut

and efficient discharge of material. Tip rates as high or higher than the competition.Choice of Blade(Low lift standard)Others available thru parts dept.

Low Lift - Highly recommended in sandy soils where lifting isn’t crucial. Disturbs thesoil very little, allowing blades to wear longer.Medium Lift - Medium suction for lifting grass. Requires less HP than high lift.High Lift - Greatest suction for lifting grass before cutting. Can take higher HP in talldense grass. Not recommended in sandy soils.Mulching - Perfect for leaf mulching.




6315-587F4/01/13

Table of Contents


All Flex MowersAFM4522 Model

Features BenefitsCounter rotation on left hand deck Spreads grass clippings more evenly. Wing decks throw grass away from the rear

deck. Rear deck doesn’t get covered up nor does it get bogged down by cut grass.

Narrow 9'-6" transport width Transport width allows unit to be transported with ease.

4 1/2" Deck overlap Eliminates blade skips when turning. Tighter turns can be made.

Sleek frame design, including singlebeam hitch and compact deck overlap

Design allows operator to make tighter turns without leaving windrows and skips.The AFM virtually becomes a zero turn mower.

Automatic transport wing locks When wings are raised in the full transport position, the wings lock in place. Noneed to get off the tractor to lock. Pull rope from tractor seat to un-lock.

P27560SR Transport tireswith tapered bearings

Large Transport tires offer smooth roading and less grass compaction. Allowsgrass to stand up. Tapered roller bearings offer longevity.

Removable transportation tire spindles Allows a spindle to be replaced by simply removing two bolts.

Back wheels on side decks even withtransportation tires


Rigid rear side deck tires Rigid wheel yokes holds hills and slopes better. Safer unit than the competition.

Large deck flotation tires with sealant Optional 15" tires for great flotation or 18" tires for even greater flotation. The largerthe tire the less compaction in pounds per square inch allowing grass to stand up.Sealant in the tires minimizes flats.

1/4" Gauge wheel arms Gives the cutter gauge wheel arms a great deal of “hidden” strength.

Low pivot points on deck The lower the pivot points are to the ground, the more side to side swing, allowingfor excellent flotation from each deck.

Deflectors built into mower decks Safety features meet ANSI standards. Many competitors use chains for protection.Once chains are removed the unit may not meet ANSI specifications.

Rear discharge Even dispersal, discharged items are always aimed downward. No rear chains areneeded, which tend to clump damp grass.

Cat. 4 CV main driveline Constant velocity main driveline allows for tighter turns without harming U-joints indriveline.

Cat. 3 slip-clutch wing drivelines Reduces start-up torque that is put on the driveline, gearbox and gearbox support.

Slip clutch protection Guards against premature gearbox failure. Protects mower deck spindles.

Heavy center gearbox mounting plate Handles start up torque.

Gearbox HP Rating 65 - 100 HP

Gearbox warranty S/N 368187- one year on all gearbox componentsS/N 368188+ 5 years on gearbox housing, gears and shafts, 3 years on bearingsand seals on gearbox.

Easy to grease blade spindles No guards to remove for routine greasing of blade spindles.

Middle spindle sits towards theback of the mower deck

Uses less horsepower and allows material to escape the mower deck easier. Thedischarge of the material is more even. Design eliminates windrowing.

Spring loaded idlers Applies constant tension to belt to run efficiently.

Easy belt tension release Easily release belt tension for changing belt or for winter storage.

High blade tip speed (18,498 fpm) Lifts the grass up for a clean cut and efficient discharge of material.Tip rates as high or higher than the competition.

Choice of Blade(Medium lift standard)Others available thru parts dept.

Low Lift - Highly recommended in sandy soils where lifting isn’t crucial. Disturbsthe soil very little, allowing blades to wear longer.Medium Lift - Medium suction for lifting grass. Requires less HP than high lift.High Lift - Greatest suction for lifting grass before cutting. Can take higher HP intall dense grass. Not recommended in sandy soils.Mulching - Perfect for leaf mulching.




7315-360F4/01/13

Table of Contents
Angle Broom

Angle BroomModel AB84

Features Benefits

32" Bristle Diameter Provides for long service life.

Available in 60", 72" & 84"Working widths

Provides for excellent productivity and ideal sizes for most skid steers and compact utilitytractors.

Choice of poly or wire orcombination poly/wire bristles

Allows owner/operators to meet operational needs. Wire or poly/wire combinations providemore wear life and more aggressive sweeping action.

Faceted hood design Provides for a higher level of overall structural integrity.

Easily removable brush drive Allows for quick and easy change out of brushes without motor removal or openinghydraulic lines.

Choice of manual or hydraulicangling

Allows owner/operators to meet budgetary and operational needs. High or regular flowhydraulic options are offered to ensure that cylinder travel response is safe andappropriately matched to output flow of the tractor.

Brush angles 30 degrees tothe left or right

Provides for excellent material control and puts sweepings where the operator wants them.

Compatible with12GPM to 25GPM hydraulicflow at 2,000 psi

Allows attachment to a wide range of skid steers and compatible compact utility tractorsequipped with loader arms and skid steer adapter plates.

Integral flow control valve Protects hydraulic system and motor from hydraulic inputs exceeding 25 GPM.

Integral float control design Spring loaded adjustable down pressure control and stops prevent premature brush wearwhile providing appropriate surface contact with the rotary brush.

100 to 230 rpm brush rotation Provides for good sweeping action and material control.

Integral storage stands Enables easy dismount and storage and keeps bristle ends from becoming deformed bysupporting weight of the unit.

Options

Rubber Dust Deflector Flap Helps keep dust levels under control and down and under the hood cowling and out of theoperators field of vision.

Dust Suppression system Hood mounted spray boom and nozzles dispense a fine spray mist in front of the broom tocontrol and minimize airborne dust particles.

Metal Shroud Extension Extends the broom shroud further forward to help control dust. Spray nozzles can bemounted on the extension to help minimize airborne dust particles.

Marker Indicators Aids operator in knowing exact position of extreme left and right edges of the unit for saferand unencumbered operation.


8323-033F7/15/13

Table of Contents
Bale Spears

Bale SpearsBS & BSE Series

Features Benefits

Designed to fit Skid Steer Loaderhitches or Euro style hitches

The BS Series can be attached to machines fitted with a Skid Steer adaptermounting plate and the BSE Series can be attached to machines fitted with a Eurostyle adapter mounting plate.

Bales can be pushed with single anddouble spear units

Good for pushing bales onto side dump trailers.

Spear units punch holes in end ofbale not in the circumference

Very little moisture can enter the bale where spears punch. Grappling type bale liftspunch holes in the circumference allowing moisture to penetrate the bale andaccelerates bale deterioration.

Single spear units also include twoshort bale spikes

Bale spikes keep bale from rotating on the single spear.

Single spear units takes less force topush the spear into the bale

Bales of all sizes won’t shift positions as easily while pushing the spear into thebale. Single spears are ideal for lifting smaller lighter bales.

Double spear units have twice thelifting capacity

Two spears can lift twice as much weight as a single spear. Also, the two spearsspaced apart miss the soft inner core of a bale and probe the harder outer areaallowing the spears to lift a heavier bale.

Double spear units probe lower onthe bale

They can lift the bale higher.


9319-062F7/19/12

Table of Contents
Blades,Front

Blades, FrontTB2596 & TB25108 Models

Features Benefits

Reinforced 10 gaugemoldboard design

Provides added strength and durability.

Choice of 96" or 108" workingwidths

Allows customers to choose the blade that meets their operational needs.

Double acting angling cylinder Easily enables up to 30 degrees of angling to left or right distributing the load where youwant it to go.

Trip edge design withadjustable springs

Protects the structural integrity of the blade while still maintaining load control no matterwhat the bottom edge encounters.

Easy attaching mountingsystem

Adapted for skid steer mounting and tractor loaders with skid steer type mounting plates.

Rotational free floating tiltaction blade design

Allows blade to rotate on its mounting trunnion keeping the blade edge in uniform contactwith the ground.

Transport lock Keeps blade level in transport for better operator visibility and safer handling.

Standard operator mountingstep

Provides for safer and easier mounting and dismounting by the operator when the blade isused in skid steer applications.

41" overall blade depth Provides ability to perform in deeper snow conditions.

Replaceable bottom wearedge

Offered in steel or heavy duty poly construction to match ground & surface operatingconditions.

Skid Shoes Offered as standard equipment. Establish lower limits of blade operation to prevent surfacegouging or cutting to deep.

Optional Blade Marker Provides operator with improved awareness and visibility of outermost edges of the bladebottom to prevent unwanted contact with ground obstacles.

Optional Top MountedRubber Deflector

Helps prevent snow from over-topping the moldboard in deeper snow conditions.


10301-291F3/04/09

Table of Contents
Rear

Blades, RearRB05 Series

Features BenefitsWarranty One year parts & labor. See warranty page for complete details.

48", 60" Working widths Choice of two sizes to pick from.

17-25 HP rating Fits a wide variety of small tractors between 17 & 25 HP.

Cat. 0 with Cat. 1 pins andCat. l limited hitch types

Fits smaller tractors with Cat. 0 hitch & Cat. l limited hitch.

Blade angles left and rightup to 30o in either direction

(5 forward positions in 15o increments and 5 reverse positions in 15o increments)Many angles for diverse jobs and results.

Blade offsets left and right 10" Manually adjust offset to move moldboard over and keep hitch centered on tractor.

13 1/2" Moldboard height Can pull a lot of dirt for a little blade.

Heat treated cutting edge Hard edge protects the moldboard edge.

Parking Stand Store unit with front of hitch off the ground, allows for easier hook-up.

Landscape Rake adaptable 05 Series Landscape Rake element will fit in place of the moldboard for diversity.

Skid shoes (optional) Set depth of blade to clear obstructions like manhole covers, street cracks.

RB15 Series

Features BenefitsWarranty One year parts & labor.

60", 72", 84" Working widths Choice of three sizes to pick from.

17-40 HP rating Fits a wide variety of small tractors between 17 & 40 HP.

Quick-Hitch Fits Land Pride Quick-Hitch.

Blade angles left and right up to45o in forward position and30o in reverse position

(7 Forward positions in 15o increments and 5 reverse positions in 15o increments)Many angles for diverse jobs and results.

Blade offsets 12" left and right Manually move moldboard to cover either tractor tire.

14" High rolled moldboard Rolled moldboard allows material to flow easily, which means less drag, less HP.1/4" moldboard thickness Is just right for 40 HP work.

Reversible cutting edge For twice the life.


Skid shoes (optional) Set depth of blade to clear obstructions like manhole covers, street cracks.

Landscape Rake adaptable Remove moldboard and add rake element to add diversity of frame.


11301-143F2/24/14


Table of Contents

Blades, RearRB16 & RB26 Series

Features Benefits

Warranty One year parts & labor. See warranty page for complete details.

RB16 Working Widths (60", 72", 84")RB26 Working Widths (72", 84", 96")

Choice of three sizes per Series to pick from.

20-40 HP rating for RB16 Series25 - 60 HP for RB26 Series

RB16 Series fits a wide variety of small tractors between 20 & 40 HP.RB26 Series fits a wide variety of small tractors between 25 & 60 HP.

Quick Hitch Fits Land Pride Quick Hitch.

Blade angles left and right up to45o in forward position and30o in reverse position

(7 Forward positions in 15o increments and 3 reverse positions in 30o increments)Many angles for diverse jobs and results.

Blade offsets left or right 12" Manually move moldboard to cover either tractor tire.

Blade tilts up or down up to 15o (5 positions: Center, 2 clockwise, and 2 counterclockwise) Allows operator to dosimple tasks such as putting a crown in the middle of a road to making V-type ditches.

Formed rolled moldboardRB16 Series (14" High Moldboard)RB26 Series (17 1/2" High Moldboard)

Rolled moldboard allows material to flow easily, which means less drag, less HP.14" High moldboard for good capacity.17 1/2" High moldboard for excellent capacity.


Parking stand Store unit with front of hitch off the ground, allows for easier hook-up.

End Plates (Accessory) End plates hold material in to be moved.

Skid shoes (Accessory) Help protect from hitting low obstructions by keeping the cutting edge off the ground.Set skid shoes to clear obstructions like manhole covers and street cracks.

Rake Assembly (Accessory) The blade assembly can be removed from the main frame and a rake assemblyattached to give the Land Pride Rear Blade versatility.

Hydraulic Angling (Accessory) Makes rotating blade angle horizontally easy with infinite number of angles availablebetween 0o and 45o clockwise and counterclockwise.


12301-375F3/19/14

Table of Contents


Blades, RearRB37 Series

Features Benefits


Working widths (72", 84" & 96") Choice of three sizes to pick from.

35-80 HP rating Fits a wide variety of small tractors.

Quick-Hitch Fits Land Pride Quick-Hitch.

Blade angles left and right up to45o in forward position and 30o inreverse position

Allows operator to set the blade at many angles to complete different jobs withsatisfactory results.See Specifications for number of angles in forward and reverse positions.

Blade offsets left or right up to 26" Manually rotate main frame in 15o increments up to 45o to cover either tractor tire andto allow operators to work next to retaining walls, abutments, and curbing.

Blade tilts up or down up to 15o (5 positions: Center, 2 clockwise, and 2 counterclockwise) Allows operator to dosimple tasks such as putting a crown in the middle of a road to making V-type ditches.

17" High moldboard Rolled moldboard allows material to flow easily, which means less drag, less HP.17" High moldboard for excellent capacity.



Hydraulic Angling (Accessory) Allows operator to change blade angle from the tractor seat.

End Plates (accessory) End plates hold material in to be moved.

Skid Shoes (accessory) Help protect from hitting low obstructions by keeping the cutting edge off the ground.Set skid shoes to clear obstructions like manhole covers and street cracks.


13301-457F4/02/13


Table of Contents

Blades, RearRBT35 Series

Features Benefits


84" & 96" Working widths Choice of two sizes to pick from. Both sizes handle large capacities.

35 to 80 HP range for 2-Wheel Drive35 to 65 HP range for 4- Wheel Drive

Fits a wide variety of tractors.

Cat. 1 or 2 Fits wide variety of tractors.

Fits Land Pride Quick-Hitch Quick and easy attaching without leaving tractor seat.

3-Way Blade Tilt, angle and offset features available hydraulically or manually.

Blade angles left and rightup to 40o manually andup to 50o hydraulicallyin either direction

(9 positions manually: Center, 4 clockwise and 4 counterclockwise in 10o increments)(Hydraulically: Any degree up to 50 degrees)Allows the operator to set the blade at the angle of his choice up to 40o to complete thejob with satisfactory results.

Blade offsets left and right up to 30" (9 positions manually: Center, 4 positions left and 4 positions right)(Hydraulically: Any position up to 30")Allows the operator to position the end of the moldboard beyond tractor tire and close tosolid obstacles such as fences, buildings and abutments.

Blade tilts up and down up to 20o Allows the operator to do simple tasks such as putting a crown in the middle of a road tomaking V-type ditches of various sizes.

Fully welded main frame(Tubular construction)

Fully welded adds overall strength and rigidity to blade frame.

Heavy-duty pivot assemblywith 3" solid steel kingpin

3/4" Plate steel turntable and 3" kingpin for handling the high amount of torque that canbe transferred to this area.

Formed 17 inch Moldboard Precisely formed moldboard rolls dirt and debris with ease.

5/16" Moldboard thickness with boxreinforcement

Thick material with fully welded box reinforcement creates a strong moldboard.

Reversible cutting edge Get twice the wear from the cutting edge by flipping it over.

Retractable parking stand Able to store the unit with the frame off the ground, also aids in attaching to tractor.

Accessories

Skid shoes Skid shoes help protect from hitting low obstructions by keeping the moldboard off theground.

End plates End plates hold material in and allows it to be moved.

Cushion valve Helps protect the moldboard and cylinders in the event an obstruction is hit by allowinghydraulic fluid to bypass the cushion valve and flow back towards the tractor.


14301-251F6/10/10

Table of Contents



Features Benefits


84", 96", 108" Working widths Choice of three sizes to pick from. All sizes handle large capacities.

65 to 100 HP Rating Fits a wide variety of tractors.

Cat. 1 or 2 Fits wide variety of tractors.

Fits Land Pride Quick-Hitch Quick and easy attaching without leaving tractor seat.

3-Way Blade Tilt, angle and offset features available hydraulically or manually.


(15 positions manually: Center, 7 clockwise and 7 counterclockwise)(Hydraulically: Any degree up to 45 degrees)Allows operator to set the blade at the angle of his choice up to 45o to move the desiredamount of material with satisfactory results.



Fully welded main frame Fully welded adds overall strength and rigidity to blade frame.

Heavy-duty pivot assemblywith 3 1/8" solid steel kingpin

3/4" Plate steel turntable and 3 1/8" kingpin for handling the high amount of torque thatcan be transferred to this area.

Formed 17 inch Moldboard Precisely formed moldboard rolls dirt and debris with ease.

5/16" Moldboard thickness with boxreinforcement

Thick material with fully welded box reinforcement creates a strong moldboard to handletough jobs.

Reversible cutting edge Get twice the wear from the cutting edge by flipping it over.

Retractable parking stand Able to store the unit with the frame off the ground, also aids in attaching to tractor.

Accessories

Skid shoes Skid shoes help protect from hitting low obstructions by keeping the moldboard off theground.

End plates End plates hold material in and allows it to be moved.

Cushion valve Helps protect the moldboard and cylinders in the event an obstruction is hit by allowinghydraulic fluid to bypass the cushion valve and flow back towards the tractor.

Selector Valve Provides a way to operate 2 cylinders at one outlet, thereby reducing thenumber of required outlets by one.


15301-206F6/10/10


Table of Contents


Features Benefits


96" & 108"Working widths Choice of two sizes to pick from. Both sizes handle large capacities.

70-125 HP Range Fits a wide variety of tractors.

Cat. 2 and 3 Bushing provided to go from Cat. 2 to Cat. 3 enables a wider variety of tractors to beused.

Quick hitch compatible Compatible with Land Pride Quick hitch for easy attachment and removal. Increasesproductivity.


(15 positions manually: Center, 7 clockwise and 7 counterclockwise)(Hydraulically: Any degree up to 45 degrees)Allows operator to set the blade at the angle of his choice up to 45o to move the desiredamount of material with satisfactory results.



Fully welded reinforced main frame Overall mainframe strength is enhanced due to being fully welded.


1" Plate steel turntable and 4" kingpin for handling the high amount of torque that canbe transferred to this area.

Formed 19" moldboard with top lipreinforcement

Formed moldboard with 90 degree bent top for additional strength. Tall moldboardallows for a great deal of material to be moved.

5/16" Moldboardwith 1/4" reinforcement

Heavy-duty moldboard to handle loads from 125 HP tractors.

Grease zerks at all pivot points Helps front pivot shaft maintain bind free movement.

Reversible cutting edge Lengthens blade life by being able to turn cutting edge over and use other edge.

Retractable parking stand Enables one person hook-up and keeps the mainframe off of the ground.

Skid shoes (optional) Skid shoes protect moldboard from hitting low-lying obstructions such as manholecovers.

End plates (optional) End plates allow the blade to hold material in to drag from one spot to another.

Cylinder cushion valve (optional) Cylinder cushion valve protects the cylinders and blade from sudden impacts byallowing hydraulic fluid to escape vs. blowing seals.

Single or dual gauge wheels(optional)

Gauge wheels position the height of the blade to aid in grading.


16301-205F6/10/10

Table of Contents


Blades, RearRBT55120 Model

Features BenefitsWarranty One year parts and labor. See warranty page for complete details.

120" Working width Can handle large capacities.


Cat. 2 and 3 Bushing provided to go from Cat. 2 to Cat. 3 enables a wider variety of tractors to beused.

Quick hitch compatible Compatible with Land Pride Quick hitch for easy attachment and removal. Increasesproductivity.

Blade angles left or rightup to 45o in either direction

(15 positions manually: Center, 7 clockwise, and 7 counterclockwise)(Hydraulically: Any degree up to 45 degrees)Allows operator to set the blade at the angle of his choice up to 45o to move thedesired amount of material with satisfactory results.

Blade offsets left or right up to 33" (15 positions manually: Center, 7 positions left, and 7 positions right)(Hydraulically: Any position up to 33")Allows the operator to position the end of the moldboard beyond tractor tire and closeto solid obstacles such as fences, buildings, and abutments.

Blade tilts up or down up to 15o Allows the operator to do simple tasks such as putting a crown in the middle of a roadto making V-type ditches of various sizes.

Fully weldedreinforced main frame

Overall mainframe strength is enhanced due to being fully welded.


1" Plate steel turntable and 4" kingpin for handling the high amount of torque that canbe transferred to this area.

Formed 19" moldboard with top lipreinforcement

Formed moldboard with 90 degree bent top for additional strength. Tall moldboardallows for a great deal of material to be moved.

5/16" Moldboardwith 1/4" reinforcement

Heavy-duty moldboard to handle loads from 180 HP tractors.

Heavy-duty pivot assembly 1" Plate steel turntable and 4" kingpin handle tremendous torque delivered by up to180 HP tractors.

Grease points infront pivot shaft

Helps front pivot shaft to easily move.

Reversible cutting edge Lengthens blade life by being able to turn cutting edge over and use other edge.


Skid shoes (Optional) Skid shoes protect moldboard from hitting low lying obstructions such as manholecovers.

End plates (optional) End plates allow the blade to hold material in to drag from one spot to another.

Hardened wear edges (optional) Attach to outer edges of moldboard to prevent to wear in moldboard during ditching.

Single or dual gauge wheels(optional)

Gauge wheels position the height of the blade to aid in grading.


17301-172F3/19/14


Table of Contents

Blades, Rear

RBT60 SeriesFeatures Benefits

Warranty One year parts and labor. See warranty page for complete details.

10 ft. & 12 ft. Working widths Choice of two sizes to pick from. Both sizes handle large capacities.

High HP Range 2-Wheel Drive4-Wheel Drive

225 Hp with 10 ft. blade & 175 HP with 12 ft. blade200 Hp with 10 ft. blade & 160 HP with 12 ft. blade

Cat. II and Cat III 3-Point Hitch Can go from Cat. II to Cat. III 3-point tractor. Enables a wider variety of tractors to beused.

Quick hitch compatible Compatible with Land Pride QH20 Cat. II Quick hitch for easy attachment and removal.Increases productivity.

Blade angles left and rightup to 45 degrees hydraulically

Allows the operator to set the blade at the angle of his choice to complete the job withsatisfactory results.

Blade offsets left and rightup to 55" hydraulically

Allows the operator to position the end of the moldboard beyond tractor tire and close tosolid obstacles such as fences, buildings and abutments.

Blade tilts up and down up to 15degrees hydraulically

Allows the operator to do simple tasks such as putting a crown in the middle of a road tomaking V-type ditches of various sizes.

Mainframe is fully welded andreinforced

Overall Mainframe strength is enhanced due to being fully welded.

Heavy-duty pivot assemblywith 4 1/2" Diameter solid steelmoldboard kingpin

1" Plate steel turntable and 4 1/2" King pin for handling high torque in this area up to225 HP 2-wheel or 200 HP 4-wheel drive tractors with 10 ft. moldboard and175 HP 2-wheel or 160 HP 4-wheel drive tractors with 12 ft. moldboard.

Formed 19" high moldboard Can move a great deal of material in a short time.

1/2" Formed Moldboard with3/8" formed channel reinforcement

Makes it one of the strongest moldboards in its class for handling heavy loads.


Front pivot shaft has two greasepoints

Helps front pivot shaft to move easily.

Heavy-duty blade pivot assembly 1" Plate steel turntable and 4 1/2" kingpin handle tremendous torque delivered by up to225 HP tractors.

AccessoriesSkid shoes Skid shoes protect moldboard from hitting low lying obstructions such as manhole

covers.

End plates End plates allow the blade to hold material in to drag from one spot to another.

Dual gauge wheels Gauge wheels position the height of the blade to aid in grading.


18301-360F6/10/10

Table of Contents
Box Scrapers

Box ScrapersBB05 Series

Features Benefits3/16" Side panels Strongest in this class.

Square tubing shank support Many competitors use angle iron. Box tubing is stronger.

Clevis -type lower 3-Pointhitch

Much stronger than pin type hitch.

3-Position heat treatedspring steel shanks

Offers flexibility for deep to shallow settings and Heat-treated for longevity.

Working widths 48", 54"

HP Range 17-25 HP

Bump-formed moldboard While scraping, this allows the dirt to roll off the moldboard creating less drag resulting inlower HP requirements and faster working conditions.

12 3/4" Moldboard height Box Scraper can hold a lot of material.

Moldboard Heavy moldboard with precise roll holds its shape under heavy loads.

Heat-treated, dimpled-on tips Easy to replace tips that are heat treated for toughness.

Heat-treated, reversible, andreplaceable cutting blades

Heat-treated for hardness. Reversible so both edges can be used before replacing thecutting blades.

Rear backfill blade Rear backfill blade allows for backfilling trenches or foundations.

Warranty One year parts & labor.

Cat. 0, Cat.1 & Cat. limitedwith Quick Hitch capability

Fits a wide variety of tractors.Quick hitch capability allows for easy hook-up.

Two welded braces extendingfrom front to rear of bucket

These braces help keep the Box Scraper square under heavy loads.


19303-187F10/25/13


Table of Contents

Box ScrapersBB12 Series

Features Benefits3/16" Heavy side panels Built heavy to handle the tough jobs.

Shank support Many competitors use angle iron. Manufactured shank tube is more durable.

Clevis -type lower 3-Point hitch Much stronger than pin type hitch.

3 Position heat treatedspring steel shanks


48", 54", 60", 66" & 72" Workingwidths

Offered in several widths to meet customer’s needs.


Formed moldboard Formed moldboard keeps materials flowing which puts less drag on the Box Scraper,resulting in lower HP requirements and faster working conditions.

15 3/8" Moldboard height High material capacity.

Moldboard Heavy moldboard holds its shape under heavy loads.

Heat treated dimpled-on tips Easy to replace tips that are heat treated for toughness.





Category I 3-Point hitchwith Quick Hitch capability

Fits a wide variety of tractors.Quick Hitch capability allows for easy hook-up.


20303--295F10/25/13

Table of Contents


Box ScrapersBB15 & BB25 Series

Features Benefits

5/16" & 3/8" Heavy side panels Built heavy to handle the tough jobs.

Square tubing shank support Many competitors use angle iron. Box tubing is stronger.

Clevis -type lower 3-Pointhitch

Much stronger than pin type hitch.



Working widths 15 Series: 48", 54", 60", 66" & 72"25 Series: 60", 66", 72", 84" & 96"

HP Range 15 Series: 17-40 HP25 Series: 25-55 HP

Roll-formed moldboard Roll-formed moldboard keeps materials flowing which puts less drag on the Box Scraper,resulting in lower HP requirements and faster working conditions.

17" Moldboard height High material capacity.

Moldboard Heavy moldboard with precise roll holds its shape under heavy loads.

Heat treated dimpled-on tips Easy to replace tips that are heat treated for toughness.





Category 1 3-Point hitchwith Quick Hitch capability

Fits a wide variety of tractors.Quick hitch capability allows for easy hook-up.

Heavy 4" x 4" X 5/16" frontbeam with 5/16" x 1" shankhole reinforcement

Reinforcement adds additional strength to shank tube right behind shank where maximumpressure is applied.

Strong Bucket ReinforcementBB15Series

BB25 Series

Two welded braces extending from front to rear of bucket help keep the Box Scrapersquare under heavy loads.

Two welded braces extending from front to rear of bucket plus welded gussets between theside panels and moldboard provide exceptional strength for keeping the Box Scrapersquare under heavy loads.


21303-082F10/25/13


Table of Contents

Box ScrapersMR15 & HR25 Series (Retractable)

Features BenefitsMechanical or hydraulic shank tube Retractable mode can be purchased with manual or hydraulic option.

Available in (HR25 Series)or (MR 15 Series).

Can match up to many types of work or tractor capacities.

Heat treated spring steel shanks Heat-treated for longevity.

Positive Locking System Shanks are kept in the up or down position with a positive locking system. Thiskeeps the scarifier bar from bouncing in transport, and tight during field use.

Heat treated dimpled on tips Easy to replace tips are heat treated for toughness.


Quick Hitch or Cat. 1 3-Point Hitch Fits a wide variety of tractors. Quick hitch capability allows for easy hook-up.

Lower hitch clevises Allows for easier hook-up of the tractor’s lower draft arms.

Roll-formed moldboard:19" high MR1521" high HR25

Roll-formed moldboard keeps materials flowing which puts less drag on the BoxScraper, resulting in lower HP requirements and faster working conditions.

Heat-treated, reversible andreplaceable cutting edges

Heat-treated for hardness. Reversible so both edges can be used before having tobe replaced.



22305-083F1/15/10

Table of Contents


Box ScrapersHRL3578 & HR3584 Models (Retractable)

Features Benefits

1/2" Heavy Side panels Thick end panels guard against abrasion.

Hydraulic shank tube Hydraulic shank tube makes for efficient use of time.

Clevis -type lower 3-pointhitch

Allows for easier hook-up of the tractor’s lower draft arms.


Positions set for deep to shallow settings. Heat-treated for longevity.

Roll-formed moldboard Roll-formed moldboard keeps materials flowing which puts less drag on the box scraper,resulting in lower HP requirements and faster working conditions.

Heat treated dimpled ontips

Easy to replace tips that are heat treated for toughness.

Heat-treated, reversible andreplaceable cutting edges

Heat-treated for hardness. Reversible so both edges can be used before replacing the cuttingblades.

Hinged rear backfill blade.Fixed or floating

Rear backfill blade can be in float or fixed position. For packed down grade, level grade orrough grade


Category I & II 3-point hitch Fits a wide variety of tractors.

Transport lock on shanktube

Heavy-duty shank lock to keep shanks locked into place during transport.

Knurled bushings in upperand lower hitch

Work done with retractable box blades is done forwards and backwards. Bushings at hitchpoints eliminate premature wear.

Heavy Shank bumpers A 3/4" square steel bumper is located behind each shank for additional reinforcement.


23305-054F10/15/10

Table of Contents
Compact Drills

Compact Drills3P500 & 3P600 Models

Features Benefits

Category l & ll hitch Easy 3-point mounting on various types of tractors.

Choice of 2x13 Single Press Wheelsor 3x13 Center Rib Press Wheels

Press wheel options allow tailoring to various soil conditions.

2 bu/ft. Box Capacity Larger box reduces downtime / more acres per fill.

1 3/4" Fluted Seed Cups withPowdered metal flutes

Delivers outstanding accuracy.

4 Speed Gearbox for various seedrates

Makes seed rates changes quick and painless.

Heavy Duty Coil Springs for downpressure on press wheels

Gives you the range from 90 to 180 lbs. of consistent down pressure.

T-Handle Opener Depth Adjustment Provides 18 different positions for accurate depth.

3P500V Model

Features Benefits

Category l & ll hitch Easy 3-point mounting on various types of tractors.

Narrow row spacing & low profile box Ideal for orchards & vineyards.












24313-517F12/20/11

Table of Contents


Compact Drills606NT Model

Features Benefits

Hydraulic depth stop Provides infinite range of adjustments to tailor coulter depth to seeding depth.

Choice of 2x13 Single Press Wheel or3x13 Center Rib Press Wheel


Clevis Style Drawbar Hitch or PintleHitch

Allows you to hook up to multiple applications.


1 3/4" Fluted Seed Cups withPowdered Metal Flutes


Calibration Crank Calibrating your machine will allow you to put on only the amount you desire.

Grease Bank Lubricate all major components from one location.


Makes seed rates changes quick and painless and gives a wider range of adjustment.




Walkboard w/Steps Allows you to refill seed from end to end.

Spring-Steel Coulter Mounting BarsChoice of two different coulters

Takes shock loads better.Give you a wide range of penetration and performances.

3P606NT Model

Features Benefits

Category ll hitch Easy 3-point mounting on various types of tractors.

8 Position positive center mountedground drive wheel also works as thefront depth gauging wheel

Allows drive system to keep monitoring in any conditions.











Choice of two different coulters Give you a wide range of penetration and performances.


25313-518F12/20/11


Table of Contents

Compact Drills800 Model

Features Benefits





Acremeter Indicates the acres planted.

Walkboard & Ladder Allows you to refill seed from end to end.

Lock-out Hub Disengages all drive components for reduce wear on drive system.

V-bottom Dividers Allows all the seed to feed from the seed box to the feeder cup so you get completeemptying.

Seed Box Level Indicator seed Easy to read from the tractors seat and indicates the amount of left.

Folding Tongue Less storage room required.

Calibration Crank Calibrating your machine will allow you to put on only the amount of seed you desire.

Safety Chain Prevents unit to come loose from towing vehicle.

T-handle Depth Control Adjustment Provides 18 different positions for accurate depth.

2 bu/ft Seedbox Larger box reduces downtime / more acres per fill.


26313-519F12/20/11

Table of Contents


Compact Drills3P806NT Model

Features Benefits

Category ll hitch Easy 3-point mounting on various types of tractors.






Coulter Grease Bank Lubricate all components from one location.

Folding Rear Ladder Fold up out of the way while doing maintenance.

Safety Lighting Makes it safer to transport.


Seed Level Indicator Easy to read from the tractors seat and indicates the amount of seed left.

Gas Shock Assisted Lids To assist in opening lids and keeping it in an open position.



27313-520F12/20/11


Table of Contents

Compact Drills3P1006NT Model

Features Benefits

2 Standard Lift Assist wheels in thethe Rear

To provide greater lift capacity and assist the 2-point.






Coulter Grease Bank Lubricate all components from one location.

Folding Rear Ladder Fold up out of the way while doing maintenance.

Safety Lighting Makes it safer to transport.


Seed Level Indicator Easy to read from the tractors seat and indicates the amount of seed left.

Gas Shock Assisted Lids To assist in opening lids and keeping it in an open position.



28313-521F12/20/11

Table of Contents
Disc Harrows

Disc HarrowsDH10 Series

Features Benefits


Cat. l 3-point hitch Fits Land Pride Quick-Hitch for easy one-person attachment and removal.

Weight 48" - 412 lbs.; 60" - 533 lbs. Heavy construction helps penetrate ground.

2" Square frame tube Frame tubing is stronger than angle iron.

4 Adjustable gang angles Cutting aggressiveness can be adjusted on the front and rear up to 21 degrees.

3" x 1 1/2" Gang tube, 1" Sq.gang axles, high carbon steel

High carbon square axles offer great strength in punishing conditions.

16" or 18" Notchedor smooth disc blades

Choose notched blades for more aggressive digging and cutting action, or the smooth bladesfor light tilling. (16" blades only on 48" width)

3/8" Thick bearing hangers Heavy-duty hangers resist the high torque from U-bolts and/or keep the discs out of theground.

3/8" Frame side plates Offer additional strength and reinforcement to the gang tube.

Self aligning sealed bearings Self-aligning bearings offer long life while pounding through hard ground.

DH15 Series

Features Benefits

Working widths 60", 72" & 90"

Cat. l 3-point hitch Fits Land Pride Quick-Hitch for easy one-person attachment and removal.

Weight 60" - 629 lbs.; 72" - 714 lbs.; 90" - 865 lbs. Heavy construction helps penetrate ground.

2 1/2" Square frame tube Frame tubing is stronger than angle iron.

4 Adjustable front gang angles3 Adjustable rear gang angles

Cutting aggressiveness can be adjusted on the front and rear up to 21 degrees.

Adjustable gang handles Easy adjustment of gang angles.

3" x 2" Gang tube, 1" Squaregang axles, high carbon steel

High carbon square axles offer great strength in punishing conditions.

18" Notched or smooth discblades

Choose notched blades for more aggressive digging and cutting action, or the smooth bladesfor light tilling.

3/8" Thick bearing hangerswith two 5/8" U-bolts

Heavy-duty hangers resist the high torque from U-bolts and/or keep the discs out of theground.

1/2" Frame side plates Offer additional strength and reinforcement to the gang tube.

Self aligning sealed bearings Self-aligning bearings offer long life while pounding through hard ground.

Optional scrapers Scrapers will clean the discs off which can plug up and/or keep the discs out of the ground.


29322-013F continues on next page6/22/11


Table of Contents


Features Benefits


Cat. l & ll 3-point hitch Fits a wide variety of tractors.

Quick-Hitch compatible Fits Land Prides Quick-Hitch for easy one-person attachment and removal.

Weight 72" = 947 lbs.; 96" = 1143 lbs. Heavy construction helps penetrate ground

3" Square frame tube Heavy frame can handle 100 HP tractors.

Ball bearings Self-aligning, sealed ball bearings.

4 Adjustable front gang angles3 Adjustable rear gang angles

Vary the degree of aggressiveness on both front and rear gangs up to 21 degrees.

Gang adjustment handle Easy adjustment of gang angles.

4" x 3" Gang tube The gang tube resists twisting due to 4" horizontal width.

1 1/8" Square gang axles Large axles can resist the high load put on them as the discs roll through the ground.

20" or 22" Notched disc blades Larger discs will penetrate harder ground.

1/2" Thick bearing hangers 1/2" Thick bearing hangers resist high torque.

Optional scrapers Scrapers will clean the disc blades off which can plug up and/or keep the discs out of theground due to mud build-up. Adjustable.


30322-013F end6/22/11

Table of Contents



Features Benefits

Two working widths andseveral models to choose from

Designed to meet the operational and geographical needs of our customers.

Pull-type clevis hitch attachmentfor 45 to 100 hp tractors

Allows easy one person attachment to a wider range of lower priced new or usedutility tractors.

High weight per blade concentration Makes for easier disc penetration.

Heavy duty carrier frameand tongue construction

Provides for years of dependable service and performance.

Single pin release and lock on fiveposition gang angling front and rear

Makes gang adjustments for less or more aggressive tillage an easy task.

Notched or smooth disc selectionin 20" or 22" disc sizes

Lets customers choose a configuration that’s just right for their tillage task.

Greasable triple sealed disc bearing Provides for ease of service and longer bearing life.

Large transport tires with option ofadding two more

Provides capability of road and field transport over tough surface conditions.

Hydraulic depth and transport control Goes from working to transport position and back again with easy single tractorhydraulic control lever manipulation.

Front to rear leveling system Provides uniform front to rear disc gang penetration.

Optional dirt Scrapers Keeps discs from balling up with sticky mud.

Optional 18" and 20"furrow filler blades

Provides for more uniform finish on multiple pass applications.

Optional center sweep kit Provides more consistent uniform finish between gangs.

Optional tongue jack Assures easier hitch attachment to tractor.

2 Rear disc choices Choose Notched or Smooth rear discs to achieve your desired finish.


31322-251F2/18/13

Table of Contents
Ditchers

DitchersDT35 Model

Features Benefits

HP range 30 - 60 HP

Cat. l & ll Fits wide variety of tractors.

Quick-Hitch adaptable Quickly and easily attach ditcher to tractor with one person.

16" or 18" Impeller Adjustable Impeller digs a nice size drainage or irrigation ditch up to 8" or 9" deep with eachpass.

4 Blades on impeller 4 Blades make digging easier and smoother than fewer blades.

1/2" blades Heavy-duty blades made out of c1084 material for long life.

Blades can be rotated whenworn and are replaceable.

Each blade has four cutting edges to extend blade life. When one edge is worn, rotate blade180o to a new cutting edge. Replace blades when all four cutting edges are worn out.

1/2" cutting edge impeller features 4 replaceable 1/2" hardened steel cutting edges.g

Single #80 roller chain Single #80, high tensile roller chain keeps stretching to a minimum and has the strengthneeded to take shock loads posed by extreme digging conditions.

Bolt tension idler Chain idler is bolt adjusted to keep constant tension on chain during tough diggingconditions, which also makes for smoother digging operations.

Hardened tooth sprockets Hardened tooth sprockets have the strength needed to take the load of the single #80 chainand rigorous digging conditions.

Greaseable sealed for lifebearings

Input and output shafts feature 2" ID ball type bearings. Ball bearings offer smooth and quietoperation. Bearings are greasable to keep properly lubricated and purge dirt out.

4-Bolt flangette Bearings are housed in 4 bolt flangettes.

Cat. 4 shear-bolt driveline Heavy-duty driveline with shear-bolt protects the unit when obstructions are encountered.

Depth controlling skid shoe Replaceable 3/8" thick skid shoe for long life and uniform depth control.

Ripper shank For hard packed soils, the Shank rips up the ground just ahead of the impeller, allowing theimpeller to take in the soil vs. bouncing on hard packed soil. Shank has 2 heightadjustments to match impeller diameter.


32324-099F2/19/14

Table of Contents


DitchersDT55 & DTM55 Models

Features Benefits

Cat. 2 & 3 Fits wide variety of tractors.

Quick-Hitch adaptable Quickly and easily attach ditcher to tractor with one person.

Formed tubing hitch Formed tubing with 1/4" wall offers greater strength vs. plate steel hitch.

540 & 1000 RPM models Allows fitting larger tractors that are 1000 RPM only. Driveline available in 1 3/8" or 1 3/4".

20" Impeller 20" Impeller digs a nice size drainage or irrigation ditch up to 10" deep with each pass.

6 Blades on impeller 6 Blades make digging easier and smoother than fewer blades.

3/8" Hardened blades Heavy-duty blades made out of AR400 material for long life.

Blades can be rotated whenworn and are replaceable.

Each blade has four cutting edges to extend blade life. When one edge is worn, rotateblade 90o to a new cutting edge. Replace blades when all four cutting edges are worn out.

3/8" Hardened cutting edge Impeller blades feature a replaceable hardened edge to take on rough and rockyconditions. Easier and more cost effective to replace edge vs. using hard faced material onimpeller.

Double 80 chain Double 80, high tensile roller chain keeps stretching to a minimum and has the strengthneeded to take shock loads posed by extreme digging conditions.

Spring loaded chain idler Chain idler is spring loaded to keep constant tension on chain during tough diggingconditions, which also makes for smoother digging operations.

Hardened tooth sprockets Hardened tooth sprockets have the strength needed to take the load of the double 80 chainand rigorous digging conditions.

2 Greasable flange bearings Input and output shafts feature 2 1/4" ID ball type bearings. Ball bearings offer smooth andquiet operation. Bearings are greasable to keep properly lubricated and purge dirt out.

4-Bolt cast iron flanges Bearings are housed in a heavy-duty 4-bolt cast iron flange. Heavy-duty casting offers fullprotection under extreme use.

Cat. 5 Shear-bolt driveline Heavy-duty driveline with shear-bolt protects the unit when obstructions are encountered.

Depth controlling skid shoe(optional)

Replaceable 3/8" thick skid shoe for long life and uniform depth control.

Material control chute(optional)

Material control chute allows the operator to place material just outside the tractor path, oras far away as the ditcher will throw it. Control the throwing distance by raising or loweringthe chute with either a 2" x 8" hydraulic cylinder or ratchet jack.

Depth control wheel (optional) 16.5 x 6.50-8 Pneumatic gauge wheel keeps digging depth constant from just skimmingthe ground to 10" deep.

Ripper shank (optional) For hard packed soils, the Shank rips up the ground just ahead of the impeller, allowing theimpeller to take in the soil vs. bouncing on hard packed soil. Shank has 3 heightadjustments from cutting edge depth to 5" below cutting edge.


33324-053F3/03/14

Table of Contents
Drag Harrows

Drag HarrowsDRG Series

Features BenefitsSpecial tine construction Tines don’t spread apart at the center.

Heavy residue surfaces quickly without bunching or becoming clogged.Tines follow the contour of the ground providing maximum coverage.

1/2" x 3 1/2" Long cold-formedhigh carbon steel tines

Tines are constructed of strong materials to eliminate breakage and provide long wear life.

60 Tines per 4 ft. of width High number of tines for breaking-up clods and leveling soil profile.

Tines are offset Provides uniform coverage without making ridges.

Three drag positionsDrag Mat

Light Penetration

Deep Penetration

Tines Point Up: Gentle action for covering fertilizer & seed, smoothing & leveling soilsurfaces, and scattering manure droppings. Excellent for grassy applications.Tines point down & back: Stronger action for working fertilizer & seed into soil and turf,breaking up and leveling heavy soil, fluff & leveling arenas, aerating soil for fasterdry-downtime, de-thatching pasture grasses, and grooming snow-packed ski resorts.Tines point down & forward: Aggressive action for loosening and breaking-up soil.

Low horsepower requirements Easy to pull with Utility vehicles, lawn tractors, small tractors, and pickups.

No lubrication or adjustments Saves time and you don’t get dirty from grease or oil.


34322-207F3/03/14

Table of Contents
Drag Scraper

Drag ScraperBB4596, BB4510 & BB4512

Features Benefits

70 to 130 HP Range Fits a wide variety of tractors.

4 x 4 Square tube cross beam Square tubing is structurally strong. Helps keep the Drag Scraper square.

3/8" Heavy side panels with anglereinforcement on the diagonal

Built heavy to handle tough jobs and to keep the side panels straight under sideloads.

1/4" Formed moldboard with internalbrace bars and 3" x 3" x 3/8" anglereinforcement at the cutting edge

Formed moldboard helps keep materials flowing, decreases drag, lowershorsepower requirements, and speeds up work. Brace bars extending fromcrossbeams to lower moldboard keep the moldboard straight under heavy loads.Angle reinforcement at the cutting edge helps keep the cutting edge straight.

Side Panels have vertical gussets atthe front

Vertical gussets help keep the panels straight vertically under side loads.

1/2" x 6" Heat-treated, reversibleand replaceable cutting blade

High carbon steel heat-treated for hardness gives the cutting blade long life.Reversible so both edges can be used before replacing the cutting blade.

24" High Moldboard and side panels Has a high material capacity for doing a lot of work in a short time.See Specifications for actual capacities.

5" Maximum cutting depth Can load the bucket quickly.

21" Dump clearance Capable of dumping a lot of material quickly.

Optional tilt allows blade point todrop on the right side

Capable of making deep angle cuts in one pass.See Specifications for actual depth of blade drop.

Optional weight tray Weight tray can be filled with 760 lbs. of concrete to help force the cutting blade intothe material.


35306-096F3/03/14

Table of Contents
Flail Mowers

Flail MowersFM21 Series

Features Benefits

60" & 72" Cutting widths Good cutting widths for applications in this HP range.

25-55 HP gearbox rating Fits a large array of consumer, municipality and landscape of tractors.

3-Point hitch offsets mower to the right:FM2160 Offsets mower 1/2" or 6 1/2"FM2172 offsets mower 6 1/2" or 17 1/2"

The two position hitch mounting allows the mower to be offset to the right for acloser cut alongside buildings, fences and roadsides.

One year gearbox warranty The gearbox is designed tough to withstand the rigors of flail mowing.

3/4" – 4" Cutting height Variable cutting heights for many uses.

1" Cutting capacity Can cut small saplings.

Duckfoot style knives Heavy enough to cut 1" material.

5" Rotor diameter Large rotor diameter protects against obstructions.

Reverse rotor rotation Brings the cut material up and over which allows it to be dispersed more evenly.

High knife tip speed Knife tip speed of 7,385 fpm provides for a clean cut.

Cat. 4 driveline with over-running clutchin gearbox

Upon disengaging the PTO, the over-running clutch allows the driveline to quitturning, while the clutch yoke, gearbox and rotor shaft slow down under their owninertia.

3 - “B” Section belts “B” Section belts fit snug in the sheaves, and the multiple belts ensure positivetransfer of power.

Baffles on the top inside of the deck Keeps the cut material from clumping together, ensuring an even distribution ofclippings.

Height adjusting roller Rear height adjusting roller with greaseable bearings and tapered ends to preventgouging during turns.

Standard scrapers on rear heightadjusting roller

Keeps the roller clean for consistent cutting height.

Adjustable rear panel Adjusts to allow strong discharge of material and aids in cleaning underside ofdeck.


36309-069F6/29/10

Table of Contents


Flail Mowers

FM31 & FM41 SeriesFeatures Benefits

88" Cutting width A good cutting width for many applications.

35-80 HP Gearbox Rating Fits a large array of consumer, municipality and landscape of tractors.

3-Point screw type hitch can beoffset 7 3/4" Left & right

Easily offset the hitch for a closer cut alongside buildings, fences, roadsides and forgetting under tree limbs.

ACME threads on offset ACME threads are deeper allowing for easy screwing adjustment.

One year gearbox warranty The gearbox is designed tough to withstand the rigors of flail mowing.

540 RPM cast iron gearbox withover-running clutch

Enables the rotor to free swing to a stop when the tractor PTO has been turned off.

1/2" – 6" Cutting height Variable cutting heights for many uses.Lowest cutting height allows for scalping in grasses such as Bermuda prior tooverseeding.

1" Cutting capacity (31 Series)2" Cutting capacity (41 Series)

Cut saplings when used in a rough setting.41 Series is good for chopping up tree trimmings.

Fine cutting knives (31 Series)Forged hammer knives (41 Series)

Heavy enough to cut 1" material, yet fine enough to groom a yard.Forged hammers are just right for chopping up prunings up to 2" thick, but will alsogroom grass in a very acceptable manner.

Brush rake teeth (41 Series Only) The adjustable brush rake teeth continually push prunings into the knife path forrepeated chopping action.

5 1/2" Rotor diameter Large rotor is able to take rough conditions.

Reverse rotor rotation Brings the cut material up and over which allows it to be dispersed more evenly.

High knife tip speed Knife tip speed of 9,805 fpm for cleaner cut.

Cat. 4 driveline Heavy-duty driveline matches up with HP range as well as potential conditions.

4 - “SPB” Section belts “SPB” Section belts have more surface to pulley contact and fits deeper in the groove.

3/16" Deck thickness Allows the mower to handle rough conditions.

Baffles on top inside of deck Keeps cut material from clumping together, ensuring an even distribution of clippings.

Height adjusting roller Rear height adjusting roller with greaseable bearings and tapered ends to preventgouging during turns.

Standard scrapers on rear heightadjusting roller

Keeps roller clean for consistent cutting height.

Hinged rear gate Can be opened for easier discharge in heavy conditions, or left closed for greatermulching capabilities.


37309-523F4/10/09

Table of Contents
Grading Scrapers

Grading ScrapersGS15 Series

Features Benefits

Cat. 1 and Cat.1 Quick Hitch compatible.Has lower hitch clevis type mountings.

Makes for faster and easier hookup to the tractor.

20-50 hp requirements with 48" working width25-50 hp requirements with 60" & 72" working widths.

Makes it compatible with many popular smaller sized andproperly ballasted compact utility tractors in use today.

Dual adjustable height grading bladesand optional 4-position scarifier shanks.

Allows the scraper to be adjusted to desired amount ofcultivation, leveling and grading action.

Reversible heat treated high carbon steel gradingblades.

For excellent wear resistance and long service life.

Hardened tips on optional scarifier shanks. Assures long service life.

Replaceable and full length heavy gauge skid shoes. Makes for easier operation and long unit life.

Reversible skid shoes Extends the life of the skid shoes.

Heavy duty frame construction. Assures long lasting reliability and performance.


38303-230F3/20/08

Table of Contents


Grading ScrapersGS25 Series

Features Benefits

Cat. l and Cat.ll Quick Hitch compatible.Has lower hitch clevis type mountings.

Makes for faster and easier hookup to the tractor.

40-90 hp requirements Makes it compatible with many popular smaller sized andproperly ballasted compact utility tractors in use today.

Dual adjustable height grading bladesand optional 4-position scarifier shanks.

Allows the scraper to be adjusted to desired amount ofcultivation, leveling and grading action.

Reversible heat treated high carbon steel gradingblades.

For excellent wear resistance and long service life.

Hardened tips on optional scarifier shanks. Assures long service life.

Replaceable and full length heavy gauge skid shoes. Makes for easier operation and long unit life.

Skid shoes are constructed of high carbon steel Extends the wear life of the skid shoes.

Reversible skid shoes Extends the life of the skid shoes.

Heavy duty frame construction. Assures long lasting reliability and performance.

Available in Land Pride Beige or Orange Paint. To meet customers preference.


39303-268F03/16/12

Table of Contents
Grapples,Claw

Grapples, ClawSGC0548 Model

Features Benefits

Designed to fit Kubota’s BX tractors withfront loaders

Easy to attach to Kubota’s BX tractor loaders with or without KubotaOriginal Quick Hitch. A good fit for Kubota BX tractors with front loaders.

Designed to protect hydraulic hoses Hydraulic hoses routed to prevent pinching.

3/4" Pivot pins Large diameter pins for extra strength.

Dual hydraulic cylinders Allows upper claw to grip the material better.

AR400 teeth material More than double the strength of mild steel.

High volume cage design Can handle large volume of material.

BX Third Function Valve Kit (Accessory) Can control all grapple and loader movements with a joystick. Provideseasy hooking and unhooking of hydraulic hoses at the front of the loader.

Extended Hitch Pins (Accessory) Allows the grapple to be hitched directly to the loader arms withoutpurchasing Kubota’s Original Quick Hitch to make the connection.


40380-138F11/25/13

Table of Contents


Grapples, ClawSGC10 Series

Features Benefits

Attaches to power equipment easily Uses universal quick hitch design for quick and easy attachment.

Universal quick hitch option or old styleKubota B Series hitch option

The quick attach plate mounted grapple can be attached to a wide varietyof machines.

No mount option This option has no mount on the back of the grapple and allows thecustomer to install a mount of their preference.


Greasable hardened bushings at uppergrapple pivot locations

Bushings can be replaced if needed.

1" Pivot pins Large diameter pins for extra strength.

Dual hydraulic cylinders Allows upper claw to grip the material better.

AR400 teeth material More than double the strength of mild steel.

Hardened bushing at cylinder mount points Bushings can be replaced if needed.

High volume cage design Can handle large volume of material.

Rear facing lower teeth Can be used for pulling roots or back dragging.


41380-092F5/05/13


Table of Contents


Features Benefits

Attaches to power equipment easily Uses Skid Steer Quick Hitch design for quick and easy attachment.

Designed to fit Skid Steer Loadersand Front Tractor Loaders

The quick attach plate mounted grapple can be attached to a wide variety ofmachines. Note: Tractor Loaders must be fitted with a Skid Steer universal quickattach mounting system.


Greasable hardened bushings at allpivot locations


1 1/4" Pivot pins Large diameter pins for extra strength.

Dual hydraulic cylinders Allows upper jaw to grip the material better.

Grade 80 teeth material More than double the strength of mild steel.


42380-074F4/10/13

Table of Contents



Features Benefits








Dual hydraulic cylinders Allows upper jaw to grip the material better.

AR400 teeth material Stronger than Grade 80 plus increased resistance to abrasion.


43380-052F4/10/13

Table of Contents
Manure

Grapples, ManureSGM15 Series

Features Benefits





Replaceable spears Spears can be replaced if damaged.

Greasable hardened bushings atpivot points



Optional cylinder shields Protects hydraulic cylinder and fittings.


44380-051F6/04/13

Table of Contents
Rock

Grapples, RockSGR15 Series

Features Benefits








Two cylinder independent grapples Able to secure uneven loads


Front gusseted tines Strengthens tine tips.

Open bottom and back Allows dirt to fall through tines.

Optional cylinder shields Protects cylinders and fittings.


45380-054F4/10/13

Table of Contents
Skeleton

Grapples, SkeletonSGS15 Series

Features Benefits








Two cylinder independent grapples Able to secure uneven loads




Optional cylinder shields Protects cylinders and fittings.


46380-053F4/10/13

Table of Contents
Grapple Buckets,Rock & Skeleton

Grapple Buckets, Rock & SkeletonSRB15 & SSB15 Series

Features Benefits


Designed to fit skid steer loadersand front tractor loaders

The quick attach plate mounted bucket can be attached to a wide variety ofmachines. Note: Tractor loaders must be fitted with a skid steer universal quickattach mounting system.





47380-101F7/24/13

Table of Contents
Grooming Mowers,Rear Discharge

Grooming Mowers, Rear DischargeFDR16 Series

Features Benefits

3 Cutting widths 48", 60", 72" Able to adapt to various size needs.

Gearbox HP rating 15 - 30 HP to cover a wide array of tractors.

Rear discharge The wide, even dispersal of grass leaves a fine thin layer directly behind the mower, vs. apossible windrow to the side. Keeps grass from blowing in unwanted areas. Easier to mowaround objects.

Deflectors Built-in to throw material down, as well as forcing thrown objects down.

Clevis type lower hitch points Allows for easy hook-up by being able to remove pins and back into clevises.

Floating 3-point Top and bottom hitch points float up and down which allows the mower to float over uneventerrain.

Roll formed front on deck. 3/16" roll formed front deck edging for greater strength and impact resistance.

Frame-over-deck design Frames takes stress out of deck by supporting it.

3/16" Deck thickness Heavy deck material to aid in overall strength and longevity. Reinforced spindle mounts.

Lower hitch pointsadjust in and out

Accommodates many tractor configurations by adjusting in and out.

Hard rubber tires Hard rubber tires are sandwiched between the rim halves, bolted in and can’t go flat. Rollerbearings allow for a long life.

Heavy-duty Gauge wheel arms 1/4" Gauge wheel arms increases strength.

Non-aligned gauge wheels Rear wheels don’t track behind the front wheels to reduce laying grass over.

High Blade Tip Speed 48" = 16,203 fpm60" = 18,195 fpm For cleaner cutting and better dispersion of clippings.72" = 18,130 fpm

Choices of Blades Low, medium, high-lift, or mulching blades are available to match customer needs andspecific applications.

Blade overlap 1" blade overlap assures no skipping in tight turns.

Heavy-duty roller bearings& 1 3/8" machined spindles

Roller bearings for smooth running and quiet operation, 1 3/8" machined spindles fordurability, balanced performance, and 0accuracy. Cast iron housings for added protectionand durability.

Top greasing spindles Assures top bearing gets grease. No shields to remove.

Single B-section Kevlar belt Simple one belt design. Kevlar material adds additional strength.

Vacuum formedABS belt guards

No scratching, no rattling.

Spring loaded adjustable idler Allows for constant and proper tension on belt. Better than adjusting gearbox for belttension.

Top Hitch Top hitch has two hook-up points which allows greater lifting leverage for smaller tractors.

5 Year Limited Gear Boxwarranty

Shows our confidence in the gearbox integrity. 5 year Parts & Labor with S/N 329841+.

Driveline hanger For ease in hookup and storage of driveline. Keeps driveline off ground.

Quick Hitch Compatible Compatible with Land Pride Quick Hitch for easy attachment and removal increasesproductivity. (Except 48")


48310-366F1/04/13

Table of Contents


Grooming Mowers, Rear DischargeFDR25 Series

Features Benefits2 Cutting widths 72" and 84"

Gearbox HP rating 15 - 50 HP


Deflectors Built-in to throw material and debris down.

Clevis type lowerhitch points

Allows for easy hook-up by being able to remove pins and back into clevises.


5/16" Rolled front on deck 5/16" roll formed front deck edging designed to take heavy abuse.





FDR2572 Only - Solid rubbertires with roller bearings

Solid rubber tires on the FDR2572 are sandwiched between the rim halves, bolted in andcan’t go flat. Roller bearings allow for a long life.

FDR2584 Only - Semi solidtires with roller bearings

Semi solid tires on the FDR2584 offer premium flotation. Roller bearings allow for a longlife. Semi solid tires offer shock absorption.

Heavy-duty Gauge wheel arms 1/4" Gauge wheel arms increases strength.


High blade tip speed 72" = 18,130 fpm For cleaner cutting and better dispersion of clippings.84" = 17,210 fpm

Choices of blades Low, medium, high-lift, or mulching blades are available to match customer needs andspecific applications.

Blade overlap Blade overlap of 1 1/4" assures no skipping in tight turns.

1 3/8" Machined blade spindlewith ball bearings and cast iron housing.

Machined spindle for balanced performance and accuracy, ball bearings for smooth andquiet running, cast iron housing for added protection and durability.

Top greasing spindles Assures top bearing gets grease. No shields to remove.

Single B-section Kevlar belt Simple one belt design. Kevlar material adds additional strength.

Vacuum formedABS belt guards

No scratching, no rattling.

Spring loaded adjustable idler Allows for constant and proper tension on belt. Better than adjusting gearbox for belttension.

Blade bar Bar gives additional support to blade. (Not available on FDR2572)


5 Year Limited Gear Boxwarranty

Shows our confidence in the gearbox integrity. 5 year Parts & Labor with S/N 329841+.


Quick Hitch Compatible Compatible with Land Pride Quick Hitch for easy attachment and removal increasesproductivity.


49310-262F11/25/09


Table of Contents

Grooming Mowers, Rear Discharge

FDR3690 ModelFeatures Benefits

Gearbox HP rating 30 - 60 HP


Deflectors Built-in to direct material and debris down.

Clevis type lowerhitch points

Allows for easy hook-up by being able to remove pins and back into clevises.


1/4" Rolled front on deck Roll formed front deck edging designed to take heavy abuse.





Semi-solid tires with rollerbearings

Semi-solid tires offer premium flotation. Roller bearings allow for a long life. Semi-solid tiresoffer shock absorption.

Heavy-duty Gauge wheel arms Rectangular tubing increases strength.


High blade tip speed 16,500 FPM For cleaner cutting and better dispersion of clippings.

Blade overlap Blade overlap of 2" assures no skipping in tight turns.

1 3/8" Machined blade spindlewith ball bearings andcast iron housing.

Machined spindle for balanced performance and accuracy, ball bearings for smooth andquiet running, cast iron housing for added protection and durability.

Top greasing blade spindles Makes greasing blade spindles easy. No shields to remove.

Double V Kevlar belt Kevlar material adds additional strength.

Spring loaded adjustable idler Allows for constant and proper tension on belt. Better than adjusting gearbox for belt tension.


5 Year Limited Gearboxwarranty

Shows our confidence in the gearbox integrity. 5 year Parts & Labor


Quick Hitch Compatible Compatible with Land Pride Quick Hitch for easy attachment and removal.Increases productivity.


50310-447F1/10/11

Table of Contents
Hydraulic Reservoir System

Hydraulic Reservoir SystemHRS18 & HRS23

Features Benefits

540 RPM Cat l & llthree-point mounting

Adapted for service on a wide range of tractors.

Choice of Approx. 17 GPM or21 GPM output at 540 RPM

Allows owner/operators to meet specific hydraulic input requirements for a wide range ofapplications.

Low horsepower requirements 28hp requirement for approx. 17 GPM at 540 RPM and 32hp requirement for approx.21 GPM at 540 RPM pumps to extend operational capabilities of many compact tractors.

35 gallon self containedreservoir with 10 micron filter

Provides more than ample amounts of clean and cool hydraulic fluid for even the mostdemanding applications.

Steel Construction onHydraulic Tank

Provides for long service life in harsh environments.

Standard reversing solenoid Allows powered implements, motors, and cylinders to be reversed for expanded range ofperformance capabilities.

Standard pressure relief valve Protects hydraulic system from overloads or unanticipated stalls.

Standard case drain port Enables attachment and usage with implements equipped with and requiring case drainreturn lines.

Standard compliment ofhydraulic fittings & two 23'-9"of hydraulic hoses supplied

Enables ready attachment and adaptation to a wide range of tractors and applications.

Multi-functional electronicremote tether control

Enables forward and reverse continuous flow or intermittent forward or reverse flow fromthe tractor seat or on the ground.

Direct PTO mounting of the540 RPM pump (Optional)

Provides for mounting possibilities on rear PTO shaft.

Driveline Connected Pump(Optional)

It is easier to attach a driveline to the tractor PTO shaft than to mount a heavy hydraulicpump directly onto the tractor PTO shaft.

Integral storage stands Provides for easy installation and removal from the tractor and clean and convenient longterm storage.


51316-191F7/24/13


Table of Contents

Hydraulic Reservoir SystemHRS3025

Features Benefits

540 RPM Cat l & llthree-point mounting

Adapted for service on a wide range of tractors.

Low horsepower requirements 52 HP requirement for approximately 25 GPM @ 3000 PSI and 540 RPM

35 gallon self containedreservoir with 10 micron filter

Provides more than ample amounts of clean and cool hydraulic fluid for even the mostdemanding applications.

Steel Construction onHydraulic Tank

Provides for long service life in harsh environments.

Standard reversing solenoid Allows powered implements, motors, and cylinders to be reversed for expanded range ofperformance capabilities.

Standard pressure relief valve Protects hydraulic system from overloads or unanticipated stalls.

Standard case drain port Enables attachment and usage with implements equipped with and requiring case drainreturn lines.

Standard compliment ofhydraulic fittings & two 23'-9"of hydraulic hoses supplied

Enables ready attachment and adaptation to a wide range of tractors and applications.

Multi-functional electronicremote tether control

Enables forward and reverse continuous flow or intermittent forward or reverse flow fromthe tractor seat or on the ground.

Driveline connected Easy hook-up to rear PTO tractor shaft.

Oil cooler For oil cooling when necessary.Included with hand valve & solenoid valve options. Optional with no valve option.

Integral storage stands Provides for easy installation and removal from the tractor and clean and convenient longterm storage.


52316-271F8/07/13

Table of Contents
Landscape Rakes

Landscape RakesLR05 Series

Features Benefits48" & 60" working widths Allows adaptability to many tractor sizes.

15-20 Tractor HP Range Fits tractors with a Cat. 0 & Cat. l 3-Point hitch.

Cat. 0 with Cat. 1 pins andCat. l limited hitch types

Fits smaller tractors with Cat. 0 hitch & Cat. l limited hitch.

Retractable Parking Stand Keeps the frame off the ground and makes hook-up easier.

Rake teeth support channel Design with channel support. This design supports the rake teeth better than competitormodels. Prevents teeth entanglement and keeps attachment hardware from working loose.

1/4" x 3/4" High carbonspring steel teeth

Sized to eliminates premature bending and tooth breakage. Constructed of materials thathave “memory” to spring back to shape.

Individual Replaceable teeth Makes replacing a damaged tooth quick and easy without removing all of the teeth.

5 Forward angles Vary how much material to move.

Optional Dual Gauge Wheels Ease of depth control and provides attachments for a grader blade.



53302-185F10/21/13


Table of Contents

Landscape RakesLR16 & LR26 Series

Features Benefits60", 72", 84", 96" Working Widths Meets a wide range of customer needs.

LR16 Series: 20-40 Tractor HP RangeLR26 Series: 25-60 Tractor HP Range

Fits many tractors with a Cat. l 3-Point hitch.

Quick Hitch Adaptable Fits Land Pride Quick Hitch for a quick and easy one person hook-up.

Retractable Parking Stand Keeps frame off the ground and makes hook-up easier.

3 1/2" Pivot Tube Heavy frame tube. Heaviest in its class.

16 1/2" Rake Height Can move a great deal of material.

Rake Teeth Support Channel Design with channel support. This design supports the rake teeth better thancompetitor models. Prevents teeth entanglement and keeps attachment hardwarefrom working loose.

5/16’ x 1" High CarbonSpring Steel Teeth

Sized to eliminate premature bending and tooth breakage. Constructed of materialsthat have “memory” to spring back to shape.

Individual Replaceable Teeth Makes replacing a damaged tooth quick and easy without removing all of the teeth.

Angle 7 Positions Versatility in operation. Vary how much material to move.

Hydraulic Angle Kit (Accessory) Allows the operator to change rake angle from the tractor seat.

Dual Gauge Wheels (Accessory) Gives operator better depth control. Wide & narrow wheels available.

Flip-Down Grader Bladewith End Plates (Accessory)

Enables the rake to perform light blading duties for moving and leveling dirt as well asother materials. Grader blade can be flipped up when not in use.

Rear Blade Attachment (Accessory) The rake assembly can be removed from the main frame and a Rear Blade attachedto give the Land Pride Rake versatility.


54302-305F10/31/13

Table of Contents


Landscape RakesLR36 Series

Features Benefits84" & 96" Working Widths Meets a wide range of customer needs.

35-80 Tractor HP Range Fits many tractors with a Cat. l or Cat. ll 3-Point hitch.

Quick-Hitch Adaptable Fits Land Pride Quick-Hitch for a quick and easy one person hook-up.

Retractable Parking Stand Keeps frame off the ground and makes hook-up easier.

2 1/2" Pivot Shaft Heavy-duty shaft. Heaviest in its class.

16 1/2" Rake Height Can move a great deal of material.

Rake Teeth Support Channel Design with channel support. This design supports the rake teeth better thancompetitor models. Prevents teeth entanglement and keeps attachment hardwarefrom working loose.

5/16’ x 1" High CarbonSpring Steel Teeth

Sized to eliminate premature bending and tooth breakage. Constructed of materialsthat have “memory” to spring back to shape.

Individual Replaceable Teeth Makes replacing a damaged tooth quick and easy without removing all of the teeth.

Rake Angle 5 Positions Versatility in operation. Vary how much material to move.

Rake Offset 7 Positions Versatility in operation. Allows the unit to work closer to objects on the side therake is offset towards.

Dual Gauge Wheels (Accessory) Gives operator better depth control. Wide & narrow wheels available.

Flip-Down Grader Bladewith End Plates (Accessory)

Enables the rake to perform light blading duties for moving and leveling dirt as well asother materials. Grader blade can be flipped up when not in use.

Rear Blade Attachment (Accessory) The rake assembly can be removed from the main frame and a Rear Blade attachedto give the Land Pride Rake versatility.


55302-306F10/09/12

Table of Contents
Pallet Forks

Pallet ForksPF10 & PF20 Series

Features Benefits

Large clamp spacing Stabilizes forks and spreads load across a wider area.

Large sliding clamp handles Makes clamping easier and ensures tight secure fit.

Tall rear uprights Keep loads from slipping backwards.

PF10 Fork: 3" x 2" x 3/16" x 31 5/8" TubePF20 Fork: 3" x 2" x 1/4" x 35 5/8"Tube

Set of two pallet forks are capable of lifting 1,000 lbs.Set of two pallet forks are capable of lifting 2,000 lbs.

Swiveling top and hinged bottom Ensures easy fit and function.

Two capacities and two sizes Meets most needs for low cost fork lift handling on customers own front loader orskid steer loader.


56319-033F1/16/14

Table of Contents


Pallet ForksPFL20, PFL30, PFL45, PFL55, & PFL64 Series

Features Benefits

Skid steer style hitch plates andEuro style hitch plates

The Plate Mounted Pallet Fork can be attached to a wide variety of machines.Note: All PFL series are offered with skid steer style hitch plates. The PFL45,PFL55, and PFL64 Series are also offer with the optional Euro style hitch plates.

Tall rear guard Keep loads from slipping backwards.

Attaches to power equipment easily Uses skid steer style hitch design or Euro style hitch design for quick and easyattachment.

Easy adjustable Forks Forks slide easily on carrying bars from one position to another. Simply rotatelocking handles up and slide forks to their new positions. Rotate locking handlesdown to secure forks in their new position.

Five capacities & three fork lengths2,100 lbs. with 42" forks3,000 lbs. with 42" & 48" forks4,500 lbs. with 48" forks5,500 lbs. with 48" & 60" forks6,400 lbs. with 48" & 60" forks

Meets most needs for low cost fork lift handling on customer owned skid steerloader with skid steer style loader hitch or front tractor loaders with either a skidsteer style loader hitch or Euro style loader hitch.


57319-038F2/24/14

Table of Contents
Post Hole Diggers,PTO

Post Hole Diggers, PTOPD10 Model

Features Benefits

Shorter yoke and boom tubing Allows Post Hole Digger to be used on sub compact utility tractors (i.e. BX Kubota).

2 7/8" Yoke tubing 3/16" Wall thickness for strength.

Auger length 30" Auger.

Auger flighting 1/4" Flighting, Semi-double flight.

Replaceable hardenedsteel points on auger

Hardened points will last longer than non-hardened. Points can easily be replaced whenworn or damaged. Cast steel auger fishtail tips.

Gearbox HP rating 15 to 30 Horsepower.

2" Output shaft 2" tackles the torque loads that can be transmitted from hard ground. Fairly standard sizefor the industry, fits many competitive augers.

3 Year gearbox warranty Shows our confidence in the gearbox integrity.

Down pressure kit (optional) Allows additional force to be supplied, hydraulically, to the beam to help force digger intothe ground.

Alignment handle (optional) Helps guide the auger from the tractor seat.

Post Hole Digger stand(optional)

Bracket mounted to bottom of gearbox can incorporate a Post Hole digger stand . Thisallows operator to hook up and unhook from tractor more safely. Stand supports unit andwill store unit when it is not on the tractor.

PD15 Model

Features Benefits

2 7/8" Yoke tubing 3/16" Wall thickness for strength.

Auger length 48" Auger.

Auger flighting 1/4" Flighting, Semi-double flight.



Gearbox HP rating 20 to 40 Horsepower.




Alignment handle (optional) Helps guide the auger from the tractor seat.


Bracket mounted to bottom of gearbox can incorporate a Post Hole Digger stand. Thisallows operator to hook up and unhook from tractor more safely. Stand supports unit andwill store unit when it is not on the tractor.


58317-048F continued on next page6/22/11

Table of Contents


Post Hole Diggers, PTOPD25 & PD35 Model

Features Benefits

Cat. 1 or 2 Hitch Fits a wider variety of tractors by fitting Cat. 1 & 2.

2 7/8" Yoke Tubing 3/16"+ Wall thickness for strength.

3 1/2" Reinforcedboom tubing

7/32" Wall tubing for strength.

Auger flighting Constant thickness on 1/4" flighting vs. tapered.



Gearbox HP rating 25 Series: 25-55 HP and 35 Series: 30-75 HP.

2" Output shaft Fits most other auger manufacturers for users who don’t need a new auger.


Cat. 3 driveline with shear-pinor optional radial pin clutch

Protection against obstructions. Radial pin works like a ‘ratchet’ to continually put drivingforce on the auger in tough conditions.

Alignment handle (optional) Guide the auger from the tractor seat.



Bracket mounted to bottom of gearbox can incorporate a Post Hole Digger stand. Thisallows operator to hook up and unhook from tractor more safely. Stand supports unit andwill store unit when it is not on the tractor.

PD Support Stand - Optional

Features Benefits

Fits existing and currentLand Pride Post Hole Diggers

Can be purchased for older models.

Quick disconnect Easy on and off design.

3 Point hook up Design makes it possible to back up to the Post Hole Digger with a tractor and hook up anddisconnect with ease and safety.

Storage capabilities Digger stand allows Post Hole Digger to be stored safely and efficiently. The stand allowseasy hook up in future use.


59317-048F end6/22/11

Table of Contents
Hydraulic

Post Hole Diggers, HydraulicHD25 & HD35 Series (3-Point)

Features Benefits

3-Point Cat. 1 or 2 Hitch Fits a wider variety of tractors by fitting Cat. 1 & 2.

Bucket Mount Option Easily bolt mounting plate to the side of the front loader bucket, and use the bucket to helppush the auger into the ground

2 7/8" yoke tubing – schedule40 pipe

3/16+ wall thickness for strength and durability.

3 1/2" Reinforced boom tubing 7/32" wall tubing for strength.

Auger flighting Constant thickness on 1/4" flighting vs. tapered.



25 Series Use with tractor hydraulic systems that pump at 5 –12 GPM, at 1500 – 3000 PSI.

35 Series Use with tractor hydraulic systems that pump at 10-25 GPM, at 1500 – 3000 PSI.



Hydraulic hose Standard on 3-point model, option on bucket mount due to distance varying on tractormodels.

Auger Sizes 6", 9", 12", 15", 18" or 24"

Auger Length 48" standard size.


60317-076F6/22/11

Table of Contents


Post Hole Diggers, HydraulicSA35 Model (Skid Steer)

Features Benefits

Universal Fit Fits most Skid Steers

Maneuverability Skid Steer Post Hole Diggers are able to reach over fences or other obstructions.

Replaceable hardened steelpoints on auger

Hardened points will last longer than non-hardened. Points are replaceable. Fish tail tipsand steel point make it easier to start a hole.

SA35 Series Fits 10 – 25 GPM hydraulic systems.

Output shaft options 2" Hex shaped output shaft, or 2 9/16" shaft. Both offer high torque resistance, with the hexshaft being the heaviest available.

Planetary gearbox Design is a tougher, more construction grade than chain and sprocket designedgearboxes. Boxes are completely sealed with all moving parts running in oil for constantlubrication.

5 Year gearbox warranty onhousings, gears & shafts

Shows our confidence in the gearbox integrity.

Auger sizes 9", 12", 15", 18", 24", 30", or 36" augers

Auger length 46" on 9" Auger, 48" on all others.


61317-093F6/22/11

Table of Contents
Powered Rakes

Powered RakesPR16 Series (3-Point)

Features Benefits

Working widths 60", 72" & 90"

Tractor Horsepower Range PR1660 = 25 - 40 HPPR1672 = 25 - 40 HPPR1690 = 35 - 75 HP

Cat. 3 drivelines withslip-clutch on seconddriveline

Slip-clutch offers protection to the gearbox and entire power train when a tough obstructionis encountered with the roller.

6" x 3" x 1/4" Tube Frames Superior in strength.

3/4" x 1 1/2" Carbide TippedStuds

Carbide tipped studs are very tough, used in the mining industry, this offers a long life tothe studs. Studs can be replaced one at a time.

15 Degrees left or rightangling

By angling either direction, the user has many options on what direction to work his area.

Gauge wheels with sealant Easy to adjust vertically to set working depth. Has tall and wide tires that keep turning influffy soil. Sealant helps seal against punctures.

End plates with storage End plates can be used to hold dirt to aid in filling low spots. Easily store the end plates onthe Powered Rake so that they are always with the Rake when needed.

Material control deflector Material control deflector is used to determine what size of material to let pass through theroller and what size to move out.

#50 Double continuous rollerchain

Double roller chain can take the fluctuation loads from the roller due to varying groundconditions.

Cast Iron chain guard housing Strong enough to protect chain in harsh conditions.

Drive chain enclosed in oilbath with drain plug

Oil keeps the chain and sprockets lubricated to keep abrasion to a minimum. Easy tomaintain and change oil level.

Replaceable skid shoes Skid shoes protect larger and vital parts of the unit. As they wear due to soil contact, theycan easily be replaced.


Quick Hitch Can be used with Land Pride Quick-Hitch. (May need extra driveline.)


62314-216F6/22/11

Table of Contents


Powered RakesSR26 Series (Skid Steer)

Features Benefits

Working width 72" & 90"

Hydraulics 72": 11 GPM at 2200 psi90": 15 GPM at 2500 psi

15 cu. in. Displacement motor Able to handle high torque loads in heavy conditions.

72" = 3" x 3" x 1/4" Tube Frame90" = 6" x 3" x 1/4" Tube Frame

Superior in strength.

Angling adjustment:22 degrees left & 18 degrees right

Angling allows proper flow of material wanting to be windrowed to allow for easycollection of large rocks and debris.

3/4" x 1 1/2"Carbide tipped stud roller

Carbide tipped studs are very tough, used in the mining industry, this offers a long lifeto the studs. Studs can be replaced one at a time.

16.5" x 6.5" Gauge wheels withsealant

Easy to adjust vertically to set working depth. Has tall and wide tires that keep turningin fluffy soil. Sealant helps seal against punctures.

End plates with storage End plates can be used to hold dirt to aid in filling low spots. Easily store the endplates on the Powered Rake so that they are always with the Rake when needed.

Two material control deflectors Material control deflectors determine what size of material to let pass through theroller and what size to move out. Two deflectors allow for forward and reverse rotationof the roller.

Bi-directional roller Enables more complete finish and control

Variable roller speed 180 to 260 rpm variable roller speed is controlled by the skid steer hydraulics and canbe used in tight areas to lessen the possibility of flying debris.

#50 Double continuous rollerchain

Double chain can take the fluctuation loads from the roller due to varying groundconditions.

Cast Iron chain guard housing Strong enough to protect chain in harsh conditions.

Drive chain enclosed in oil bath A small amount of oil keeps the chain and sprockets lubricated to keep abrasion to aminimum.

Replaceable skid shoes Skid shoes protect larger and vital parts of the unit. As they wear due to soil contact,they can easily be replaced.

Hydraulic Motor Warranty 2 Years parts and labor. Shows our confidence in the gearbox integrity.

Universal fit Universal fit with new and late model skid steer units.


63321-004F6/22/11

Table of Contents
Quick Hitches

Quick HitchesQH15 & QH20 Series

Features Benefits

QH15 QH20

Adjustable top hook(QH15 Only)

Enables adjustment if needed onimplements that are not true Cat. l

N/A

Standard Lower link pin size 7/8" Cat. l pin size. 1 1/8" Cat ll pin size.

Accepts various lower hitchpin sizes

Various pin sizes up to 1 1/8" can besecurely locked in.

Various pin sizes up to 1 7/16" can besecurely locked in.

Design fits variety of LandPride products.

Useful time saver when working on multiple projects.

Optional top link For implements that have a swiveling top link.

Automatic lock on lower 3-point

Lower pins on implement lock into place, no need to get off tractor.

Cost effective versatility Only one unit needed per tractor and implement.No separate piece for the implement side.


64320-003F6/22/11

Table of Contents


Quick HitchesSH35 Series (Skid Steer)

Features Benefits

Fits Cat. 1 or 2 implements Easily fits Cat. 1 or 2 non-PTO implements – Fits all Quick Hitch Adaptable Land Prideimplements.

Automatic lockon lower 3-point arms

Don’t have to get off of skid steer loader when hooking up to an implement.

Adjustable top hook Helps match up to implement.

Class II receiverand storage for ball hitch

A class II ball hitch can be inserted into the hitch for towing, also can be used for storing aball hitch.

Universal skid steer plate Fits most skid steer loaders.


65

Ball Hitch Receiver and Storage RackThe Quick-Hitch is equipped so that a ball hitch can beassembled to the hitch. The Quick-Hitch can then be used topull an implement with a ball hitch. The ball hitch may bestored on top of the Quick-Hitch when it is not in use.

Figure 4-1

320-019F4/08/08

Table of Contents
Rotary Cutters,Single Deck

Rotary Cutters, Single DeckRCD1884 Model

Features Benefits

Surpassed ruggedindustry standards

All Land Pride Cutters have been designed and tested and meet rigorous voluntarytesting procedures specified by ANSI.


Gearbox Seal Protection Gearbox bottom seal protection for longer bearing life.

Cat. 3 main driveline with2-plate slip-clutch

2-Plate slip-clutch protect driveline and gearboxes. slip-clutch is more convenientthan shear bolt for continual work.

Shock absorbing flex-coupler betweenmain and side gearboxes

Protects intermediate drive shaft and side gearbox from hard objects in the bladepath.

10" Deck offset to the right Allows the operator to cut closer to bodies of water, drainage ditches, roadwaysand objects such as fence lines, guard rails, buildings and trees.

Lower clevis type 3-point hitch Allows for ease of hook-up to tractor. Also adds additional strength allowing for aneven pull from the tractor’s lower arms, vs. pulling on a single pin design.

Fully welded 10 gauge deck Fully welded deck adds additional strength to the deck.10 Gauge decks can withstand more abuse than decks with lighter gauge.

Box tubing deck supports Makes for a stronger rigid deck.

Round back design Helps discharge grass better than enclosed or partially enclosed cutters.

11 5/8" Deck Height Allows cutter to handle heavy cutting conditions.

1 1/2" to 12" Cutting height Provides for a wide range of cutting conditions.

Skid shoes Provides sidewall reinforcement and protection to bottom of sidewall.

1/2" x 4" Heat-treatedfree swinging blades

Free swinging protects from obstructions. Heat-treated offers longer life.

1/2" x 4" Blade bar Heavy-duty blade bar adds support to stump jumper and gearbox output shaft.

Splined blade bar hub Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.

Stump jumper Standard round stump jumper slides over stumps, rocks and debris.

Front and rear guarding Protect against flying debris.Optional front rubber or single chain guarding.Standard rear metal band or optional rear extended metal guarding.

Optional 15" Laminated tailwheel4" x 16" Molded rubber

Laminated material is long lasting in rough conditions and can’t go flat.Can’t go flat.


66326-355F10/23/12

Table of Contents


Rotary Cutters, Single DeckRCF2060 & RCF2072 Models

Features Benefits





Cat. 3 drivelinewith shear-bolt Option

Shear-bolt offers maximum driveline protection.

Cat. 3 driveline with2-plate slip-clutch Option

Slip-clutch driveline offers convenience for continual work.

Dual position clevis type3-Point floating top link

Permits deck to follow the terrain for an even cut.

Lower clevis type3-Point hitch

Allows for ease of hook-up to tractor. Also adds additional strength allowing for an evenpull from the tractor’s lower arms, vs. pulling on a single pin design.

Heavy 10 gauge deck & side skirtconstruction

Can withstand more abuse than lighter gauge decks.


Fully welded deck Adds additional strength.

Extended cutter front For increased material flow and added protection.


Deck Height 9 11/16" Deck height on 60" and 11" deck height on 72" modelAllows cutter to handle heavy cutting conditions.


Full length skid shoes Provides sidewall reinforcement and full protection to bottom of sidewall.




10 Gauge stump jumper Standard round stump jumper slides over stumps, rocks and debris.

High blade tip speed Ensures clean cut.

15" Laminated tailwheel Laminated material is long lasting in rough conditions. Can’t go flat.

4" x 16" Solid rubber tailwheel Can’t go flat.

1 1/4" Heavy-duty spindleon tailwheel

Tailwheels take a beating, spindle gives the strength to protect tailwheel assembly.

Optional Guarding Protect against flying debris. Customer can choose to include single chain or rubberguarding on the front and back. Rear Metal Band standard on the back.


67326-459F5/09/11


Table of Contents

Rotary Cutters, Single DeckRCF2084 Model

Features Benefits





Cat. 4 driveline with2-plate slip-clutch






Heavy 10 gauge deck & side skirtconstruction












3/16" x 27" Oval stump jumper Standard Oval stump jumper slides over stumps, rocks and debris.





Optional Front Guarding Protect against flying debris.Customer can choose to include single chain or rubber guarding.

Optional Rear Guarding Protect against flying debris.Rear Metal Band is standard. Customer can choose to include single chain guarding.


68326-461F8/05/11

Table of Contents



Features Benefits




130 HP gearbox A rugged heavy built gearbox capable of handling heavy cutting applications.




Lower clevis type3-point hitch


Heavy 10 gauge deckconstruction with 1/4" side skits







High cutting capacity Can cut brushy areas with saplings up to 3".





3/16" Plate stump jumper Standard round stump jumper slides over stumps, rocks, and debris.

High blade tip speedRCF2760 = 12,384 FPMRCF2772 = 14,861 FPM

Ensures clean cut.

Laminated tailwheel Laminated material is long lasting in rough conditions.




Optional Guarding Protect against flying debris. Customer can choose to include single chain or rubberguarding on the front and single chain guarding on the back.


69326-460F3/03/14


Table of Contents


Features Benefits











Heavy 10 gauge deck & 1/4" sideskirt construction








1/4" x 2 1/2" x 18 7/16" Longskid shoes

Provides sidewall reinforcement and protection to bottom of sidewall.




3/16" x 24" x 38" Ovalstump jumper

Standard Oval stump jumper slides over stumps, rocks and debris.





Optional Front Guarding Protect against flying debris.Customer can choose to include single chain or rubber guarding.

Single Chain Rear Guarding Protect against flying debris.


70326-364F8/05//11

Table of Contents


Rotary Cutters, Single DeckRCF3096 & RCF(M)3010 Models

Features Benefits


All Land Pride Cutters have been designed and tested and meet rigorous voluntary testingprocedures.

540 or 1000 RPM Fits wider variety of tractors.

High Gearbox HP rating Gearboxes are built rugged. See Specifications for actual Gearbox HP ratings.

5 Yr. limited gearbox warranty Shows our confidence in the gearbox integrity.

3 Gearboxes Allows equal torque to be spread to left and right gearbox.

Splined rubber flex-couplersbetween the center andoutboard gearboxes

Protects the driveline and gearboxes from hard objects in the blade path.

Pull-Type constant velocitydriveline Option

Constant velocity driveline reduces chatter and extends life of U-joint during turns.

Slip-clutch protectionon main driveline

Slip-clutch is more convenient than shear-bolt, protects gearbox against sudden impact.

8'- Cat. 1 & 2 or 10'- Cat. 2 & 33-Point & Semi-mount Hitchesor Pull-type Hitch

Fits a wide range of tractors.Semi-mount and Pull-type fit older tractors without a top link and smaller tractors withoutenough lift capacity.

10 Gauge deck, fully welded Fully welded deck adds rigidity.

1/4" Thick sidewalls Protects sidewalls from thrown objects.

Round back design Allows for cleaner and efficient discharge of material, helps eliminate damage to rearcorners by not sticking out.

Pull-type w/dual leveling rods Dual leveling rods eliminate deck twisting when going over uneven terrain.

Chain or rubber guard option Reduces flying debris.

Full length skidswith replaceable shoes

Adds reinforcement to side panels. Replaceable shoes allow for change before wearingthrough to weld-on piece.

Splined blade hub Splined blade hub offers tight non-slipping attachment to output shaft.

3/16" Round stump jumper Standard stump jumper aids in sliding over obstructions, which helps protect gearboxoutput shaft.

1" x 4" Blade bar Heavy-duty blade bar adds support to stump jumper as well as gearbox output shaft.

1/2" x 4" Heat-treated blades Heat-treated blades last longer than non-heat-treated blades.

2 1/2" Diameter cuttingcapacity

Aids in cutting brush.

High blade tip speed Means cleaner cutting. See Specifications for actual blade tip speeds.

Laminated tires Laminated tires can handle almost any condition and don’t go flat.

Quick-Hitch adaptable 3-point and semi-mount are Quick-hitch adaptable.

Paint Options Choice of red, orange, green, or tan to match popular tractor lines.


71326-566F11/02/12


Table of Contents


Features Benefits


All Land Pride Cutters have been designed and tested and meet rigorous voluntarytesting procedures.

5 Year gearbox warranty A rugged heavy built gearbox capable of handling heavy cutting applications.Shows our confidence in the gearbox integrity.




Dual position clevis type3-point floating top link

Permits deck to follow the terrain for an even cut. Additional set of holes for tractors withshorter top links.



Heavy deck construction with3/16" deck top & 1/4" side skits

Strong heavy deck material for rugged use.





2" to 12" Cutting height Provides for a wide range of cutting conditions.






3/16" Plate stump jumper Standard round stump jumper slides over stumps, rocks and debris.

High blade tip speedRCF3660 = 13,572 FPMRCF3672 = 14,861 FPM

Ensures clean cut.

15" Laminated tailwheel Laminated material is long lasting in rough conditions and can’t go flat.



Optional Guarding Protect against flying debris. Customer can choose to include single chain, double chainor rubber guarding on the front and single chain or double chain guarding on the back.


72326-246F9/17/12

Table of Contents



Features Benefits

Surpassed rugged industrystandards

All Land Pride Cutters have been designed and tested and meet rigorous voluntary testingprocedures specified by ANSI.

5 Year gearbox warranty A rugged heavy built gearbox capable of handling heavy cutting applications.Shows Land Pride’s confidence in gearbox integrity.



Cat. II and III 3-Point HitchOptions with Quick HitchCapability

Fits a wide variety of tractors.Quick Hitch provides for fast hook-up.





Pull-type hitch option Fits older tractors without a top link and smaller tractors without enough lift capacity.

84" Cutting width Wide cutting width, reduces cutting time in the field.

Heavy deck construction with3/16" deck top & 1/4" side skirts

Strong heavy deck material for rugged use.Heavy side panels protects sides from debris being thrown against them from the blades.

Fully welded deck Adds additional strength and deck integrity.


13 3/8" Deck height Allows cutter to handle heavy cutting conditions.







3/16" Plate stump jumper Standard round stump jumper slides over stumps, rocks, and debris.


4" Dia. cutting capacity Can aid in clearing brush.

Dual laminated tailwheels Dual tailwheels offer greater stability in uneven terrain.Laminated material is long lasting in rough conditions. Can’t go flat.

1 1/2" Heavy-duty spindleon tailwheel (3-Point cutter)


Wheel bearings (Pull-type cutter) Tapered roller bearing in cast iron hub.

Optional guarding Protect against flying debris.


73326-412F9/30/11


Table of Contents

Rotary Cutters, Single DeckRCF(M)3696 & RCF(M)3610 Models

Features Benefits



540 or 1000 RPM Fits wider variety of tractors.

High Gearbox HP rating Gearboxes are built rugged. See Specifications for actual Gearbox HP ratings.

5 Yr. limited gearbox warranty Shows our confidence in the gearbox integrity.


Splined rubber flex-couplersbetween the center andoutboard gearboxes


Pull-Type constant velocitydriveline Option

Constant velocity driveline reduces chatter and extends life of U-joint during turns.



8'- Cat. 1 & 2 or 10'- Cat. 2 & 33-Point & Semi-Mount Hitchesor Pull-Type Hitch

Fits a wide range of tractors.Semi-Mount and Pull-Type fit older tractors without a top link and smaller tractors withoutenough lift capacity.

10 Gauge deck, fully welded Fully welded deck adds rigidity.

1/4" Thick sidewalls Protects sidewalls from thrown objects.


Pull-Type w/dual leveling rods Dual leveling rods eliminate deck twisting when going over uneven terrain.

Chain or rubber guard option Reduces flying debris.


Adds reinforcement to side panels. Replaceable shoes allow for change before wearingthrough to weld-on piece.





3" Diameter cutting capacity Aids in cutting brush.

High blade tip speed Means cleaner cutting. See Specifications for actual blade tip speeds.

Laminated tires Laminated tires can handle almost any condition and don’t go flat.

Quick-Hitch adaptable 3-Point and semi-mount are Quick-Hitch adaptable.

Paint Options Choice of red, orange, green, or beige to match popular tractor lines.


74326-600F3/03/14

Table of Contents


Rotary Cutters, Single Deck

RCR12 SeriesFeatures Benefits



Tractor HP range 20 - 50 HP


Cat. 3 driveline with shear-bolt

Shear bolt offers maximum driveline protection.



Floating top link Provides for easy hook-up. Permits deck to follow the terrain for an even cut. Two holeposition to allow greater lift leverage for smaller tractors.


1 1/4" - 10" Cutting Height Cutting height for wide range of cutting conditions.

Skid shoes (Accessory)RCR1260 & RCR1272 only

Provides sidewall reinforcement and helps protect bottom of sidewall.




10 Gauge stump jumper Allows cutter to slide over obstructions protecting the gearbox output shaft.


Laminated tailwheel Laminated material is long lasting in rough conditions and can’t go flat.

Heavy-duty spindle ontailwheel

1 1/4" spindle gives the strength to protect tailwheel assembly.

Rubber guarding Protect against flying debris.

Metal Guarding Protects against flying debris.


75326-047F6/22/11


Table of Contents

Rotary Cutters, Single DeckRCR15 Series

Features Benefits




Cat. 3 driveline with shear- bolt Shear bolt offers maximum driveline protection.



Floating top link Provides for easy hook-up. Permits deck to follow the terrain for an even cut. Two holeposition to allow greater lift leverage for smaller tractors.

Fully welded deck Robotic welded. Adds additional strength.


Cutting Height 1" - 9" cutting height for wide range of cutting conditions.





10 Gauge stump jumper Allows cutter to slide over obstructions protecting the gearbox output shaft.

High blade tip speed Ensures clean cut.42" = 11,459 fpm48" = 13,090 fpm

2" Cutting capacity Can aid in cleaning brush

Laminated tailwheel Laminated material is long lasting in rough conditions.

Solid rubber tailwheel Can’t go flat.

Heavy-duty spindle ontailwheel

Tailwheels take a beating, 1 1/4" spindle gives the strength to protect tailwheel assembly.

Guarding Protect against flying debris. Customer can choose to include rubber on the front and rear.


76312-556F2/20/13

Table of Contents


Rotary Cutters, Single DeckRCR1860 & RCR1872 Models

Features Benefits




Cat. 3 drivelinewith shear-bolt

Shear-bolt offers maximum driveline protection.



Dual position clevis type3-point floating top link

Permits deck to follow the terrain for an even cut. Additional set of holes for tractorswith shorter top links.


Allows for ease of hook-up to tractor. Also adds additional strength allowing for aneven pull from the tractor’s lower arms, vs. pulling on a single pin design.

Heavy 10 gauge deck construction Can withstand more abuse than lighter gauge decks.


Fully welded deck Robotic welded. Adds additional strength.



7 1/4" Deck height on RCR18608 7/8" Deck height on RCR1872

Allows cutter to handle heavy cutting conditions.

1 1/2" to 13" RCR1860 Cutting height1 1/2" to 11 1/2" RCR1872 Cutting height

Provides for a wide range of cutting conditions.





10 Gauge stump jumper Standard round stump jumper slides over stumps, rocks and debris.

High blade tip speedRCR1860 = 16,360 FPMRCR1872 = 14,853 FPM

Ensures clean cut.

15" Laminated tailwheel Laminated material is long lasting in rough conditions.


Heavy-duty spindleon tailwheel

Tailwheels take a beating, 1 1/4" spindle gives the strength to protect tailwheelassembly.

Guarding Protect against flying debris. Customer must choose to include chain or rubber onthe front and rear. Rear Metal Band standard.


77312-849F1/05/12


Table of Contents

Rotary Cutters, Single DeckRCR1884 Model

Features Benefits


All Land Pride Rotary Cutters have been designed and tested and meet rigorousvoluntary testing procedures specified by ANSI.





Cat I or Cat II HitchQuick Hitch Capability

Permits deck to follow the terrain for an even cut.Quick Hitch provides for fast hook-up.



84" Cutting width Wide cutting width, Reduces cutting time in the field.

Heavy 10 gaugedeck construction





Round back design Helps discharge grass better than enclosed or partially enclosed cutter.



1/4" x 2 1/2" Full lengthskid shoes

Provides sidewall reinforcement and full protection to bottom of sidewall.




10 Gauge stump jumper Standard oval stump jumper slides over stumps, rocks and debris.

High blade tip speed (17,113 FPM) Ensures clean cut.

2" Cutting capacity Can aid in cleaning brush

Available with singleor dual tailwheels

Dual tailwheels offer greater stability in uneven terrain.

15" Laminated tailwheel Laminated material is long lasting in rough conditions.

Heavy-duty spindleon tailwheel

Tailwheels take a beating, 1 1/4" spindle gives the strength to protect tailwheelassembly.

Guarding Protect against flying debris. Customer must choose to include chain or rubber on thefront and rear. Rear Metal Band standard.


78312-880F8/19/10

Table of Contents
, Dual Spindle

Rotary Cutters, Single Deck, Dual SpindleRCR2596 & RCR25(M)10 Models

Features Benefits



Tractor HP range 3-point (2596 Model = 50 - 110 HP) & (2510 Model = 60 - 110 HP)Pull-type (2596 Model = 30 - 110 HP) & (2510 Model = 50 - 110 HP)

540 or 1000 RPM Fits wider variety of tractors. (RCR2596 is 540 RPM only)

Gearbox HP rating 120 Horsepower on splitter gearbox and 60 HP on outboard gearboxes.



Splined rubber flex- couplersbetween the center andoutboard gearboxes


Constant Velocity U-Jointoption on RCR2510 &RCRM2510 Pull-type

Reduces chatter and extends life of U-joint during turns.



3-Point or Pull-type Pull-type fits older tractors without a top link or smaller tractors without enough lift capacity.(RCR2596 3-point: Cat. 1 & 2) (RCR2510 & RCRM2510 3-point: Cat. 2 & 3)

High productive cutting width RCR2596 cuts 8'-0" width.RCR2510 & RCRM2510 cuts 9'-10" width.

Fully welded 10 Gauge deck Fully welded deck adds rigidity.

3/16" Sidewall thickness Protects sidewalls from thrown objects.

Obstacle free underside Underside of deck is free of reinforcement members which tend to allow material to lodge.


Dual leveling rodson Pull-type

Dual leveling rods eliminate deck twisting when going over uneven terrain.

Chain or rubber shield option Reduces flying debris.

Full length skids withreplaceable shoes

Adds reinforcement to side panels. Replaceable shoes allows for change before wearingthrough to weld-on piece.





1 1/2" Dia. cutting capacity Aids in cutting brush.

High Blade tip speed RCR2596 (540 rpm) = 14,792 fpmRCR2510 (540 rpm) = 17,749 fpm Means Cleaner Cutting of material.RCRM2510 (1000 rpm) = 18,035 fpm

Laminated tires Laminated tires can handle almost any condition.

Airplane tires (Pull-Type only) Airplane tires offer smooth roadability.

Fits Land Pride Quick Hitch Allows for quick and easy one person hook-up.


79312-753F3/05/12

Table of Contents


Rotary Cutters, Single DeckRCR2660 and RCR2672 Models

Features Benefits



5 Year gearbox warranty Shows Land Pride’s confidence in gearbox integrity.


Cat. 4 driveline with 4 plateslip-clutch

Excellent gearbox protection with the slip-clutch slipping when encountering obstruction inthe blade path. Standard slip-clutch offers convenience over shear-bolts.

Cat. l or ll 3-point hitch Allows use on a wider variety of tractors.





1/4" Side panels foroverall reinforcement

Also protects sides from debris being thrown against them from the blades.

Fully welded deck Robotically welded. Adds additional strength and reduces rust.

Extended front tapered deck Contains and discharges material better.

Round back design Allows for more efficient handling and dispersing of material.

9" Deck Height Allows cutter to handle heavy cutting conditions.



Full length skids withreplaceable shoes

Full length skids protect side plate structure, replaceable shoes for convenience.



Splined blade bar Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.

3/16" Round stump jumper Standard stump jumper aids in sliding over obstructions, which helps protect gearbox outputshaft.

High blade tip speed 60" =12,384 fpm and 72" = 14,861 fpm


Rugged laminated tailwheel Can’t go flat. Choice of single or dual combination.

Chain or rubber shield option Located on front and rear. Reduces flying debris.


80312-783F3/05/12

Table of Contents


Rotary Cutters, Single DeckRCR2684 Model

Features Benefits



5 Year gearbox warranty A rugged heavy built gearbox capable of handling heavy cutting applications.Shows Land Pride’s confidence in gearbox integrity.


Cat. 4 driveline with 4 plateslip-clutch

Excellent gearbox protection with the slip-clutch slipping when encountering obstruction inthe blade path. Standard slip-clutch offers convenience over shear-bolts.

Cat. II or III HitchQuick Hitch Capability

Permits deck to follow the terrain for an even cut.Quick Hitch provides for fast hook-up.



84" Cutting width Wide cutting width, Reduces cutting time in the field.



1/4" Side panels foroverall reinforcement

Also protects sides from debris being thrown against them from the blades.

Fully welded deck Robotically welded. Adds additional strength and deck integrity.

Round back design Allows for more efficient handling and dispersing of material.





Full length skids protect side plate structure, replaceable shoes for convenience.



Splined blade bar Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.

3/16" Oval stump jumper Standard stump jumper aids in sliding over obstructions, which helps protect gearbox outputshaft.

High blade tip speed Ensures clean cut. (14,369 fpm)


Available with singleor dual tailwheels

Dual tailwheels offer greater stability in uneven terrain.

15" Rugged Laminatedtailwheel

Laminated material is long lasting in rough conditions. Can’t go flat.

Chain or rubber shield option Located on front and rear. Reduces flying debris.


81312-785F3/05/12


Table of Contents

Rotary Cutters, Single DeckRCP(M)26 & RCP(M)30 Series (Parallel Arm)

Features BenefitsTractor HP Range

RCP(M)2660RCP(M)3060

Designed for 75-150 HP tractor with minimum weight of 8,000 lbs.Designed for 95-175 HP tractor with minimum weight of 12,000 lbs.

Gearbox HP Rating 150 HP

3 Point Design Does not tie up a tractor. Three point hook up is easy to hook up and remove from tractor.

Cutter Deck Visibility Visibility of the cutter deck is captured from the operator’s seat. Easy to see operation.Operator does not have to look behind.

Factory Assembled Arrives ready for the customer, saves time and money. (Excluding fluids and hydraulic valve)

Grease Ports All grease ports are easily accessible for servicing.

10' Transport Width Folds up close to the tractor. No weight brackets or decks hanging away from the tractor.Typically, not much wider than the tractor, which means safer transporting.

Parallel Arm Design Three cylinders used in a parallel arm design allows any cylinder to be adjusted withoutchanging the position of the others. Means less positioning.

Long Horizontal ReachRCP(M)2660 = 15'-6" (186")

RCP(M)3060 = 18'-10" (226")Good access for reaching vegetation far away from the tractor.Better access for reaching vegetation far away from the tractor.

Above Grade Vertical ReachRCP(M)2660 = 11'-5" (137")RCP(M)3060 = 13'-5" (161")

Good access for reaching up embankments and cutting low over hanging limbs.Better access for reaching up embankments and cutting low over hanging limbs.

Below Grade ReachRCP(M)2660 = 9'-1" (109")

RCP(M)3060 = 11'-0" (132")Good access for reaching down embankments.Better access for reaching down embankments.

180 Degree Operating Tilt Arc Cutter head can be positioned to reach different angles.

Cat. 2 & 3; 540 or 1000 RPM Fits a wide variety of tractors.

35 Gallon Oil Reservoir Large reservoir maintains optimum fluid temperatures and also serves as counterweight.

2" Cutting Capacity Ideal for trimming brush.

High Blade Tip Speed 15,000 FPM tip speed means cleaner cutting.

Two Parking Stands Easy and level storage, makes it easy for hooking to tractor.

In-line Filter Cleans hydraulic fluid before it re-enters the reservoir.

Shut-off Valve Permits maintenance with minimum oil loss.

Built-in Auxiliary Weight Rackon Left Side

Suitcase weights can be added to left side for balance. Able to choose the weight bracketto match various types of suitcase weights.

Oil Pressure Gauge Easily monitor oil pressure for optimum performance of unit.

Hydraulic Breakaway Allows the parallel arms to pivot backwards to avoid obstacles and to protect cutter deckand parallel arms. Parallel arms are pivoted back to normal operating position with thehydraulic breakaway cylinder.

Flow Control Valve Compensates for various tractor hydraulic systems so proper hydraulic fluid pressure can bemaintained. (Used only with solenoid control Option.)

Solenoid Controlled Cylinders Allows cutter to be used on tractors with only two hydraulic duplex outlets. Response timeis faster than tractor controls making it an excellent choice when frequent changes to deckposition. (Used only on Solenoid Control and Independent Control Options)

Gauge Wheels Option Deck floats on gauge wheels eliminating frequent deck positioning and vigilant watch forchanges in ground contour under the tractor and deck.

Independent Control Option(Self-Contained Hydraulics)

Self contained hydraulic system eliminates the tractor/RCP hydraulic incompatibility. Thisoption uses the RCP hydraulic system to operate the cutter. Tractor needs one set ofhydraulics to operate the breakaway cylinder.


82316-111F11/23/09

Table of Contents


Rotary Cutters, Single DeckSC26 Series (Skid Steer)

Features Benefits

Surpassed RuggedIndustry Standards


Low Volume Motor @ 11-16 gpmMedium Volume Motor @ 17-21 gpmHigh Volume Motor @ 22-27 gpm

Customer can chose one of three optional motors for his SC2660 cutter or one oftwo optional motors (medium and high volume) for his SC2672 cutter. This allowsthe cutter to fit a wide variety of Skid Steers. Also the deck can be upgraded to adifferent motor when owner upgrades his Skid Steer.

Two Year Gearbox & Motor Warranty Shows Land Pride’s confidence in the gearbox and motor.

Case Drain Protects gearbox.

Smooth Top 14 GA Deckwith 10 GA. Bottom Deck

No pockets to collect rain and dirt. Easy to clean.Superior double deck construction.

1/4" Side Panels forOverall Reinforcement

Protects sides from debris being thrown against them from the blades.

Side Discharge Allows material to be discharged away from operator.

Front and Rear Chain Shields Single chain on the front and double chain on the rear. Reduces flying debris.

(Optional) ReplaceableSkid Shoes

Protect side plate structure. Shoes are replaceable for convenience.

Splined Blade Bar Allows for tight positive fit of stump jumper and blade bar to motor output shaft.

3/16" Round Stump Jumper Standard stump jumper aids in sliding over obstructions, which helps protectgearbox output shaft.

1/2" x 4" Heat-treatedFree Swinging Blades

Heat-treated blades offer longer life.Free swinging blades protect from obstructions.

2" Diameter Cutting Capacity Can aid in clearing brush.

SC2660 High Blade Tip Speed Low volume motor = 18,540 fpm at 16 gpm.Medium volume motor = 18,850 fpm at 21 gpm.High volume motor = 19,000 fpm at 27 gpm.

SC2672 High Blade Tip Speed Medium volume motor = 17,200 fpm at 21 gpm.High volume motor = 18,550 fpm at 27 gpm.

Offset Hitch (8 1/2" to the right) Allows the operator to cut close to obstacles on the right side.

Optional Front Gauge Wheel Provides easy operation and handling over uneven terrain, laminated tire can’t goflat.

Floating Hitch Mounting Plate Allows smoother travel over rough terrain with the optional gauge wheel easing thefatigue put on the operator.

Optional Operator Protection Door Provides additional operator protection from flying objects.

Lift Limit Safety Chain Provides additional operator protection from flying objects by allowing the RotaryCutter to only be lifted up to 18".


83326-025F2/19/14

Table of Contents
Folding Deck

Rotary Cutters, Folding Deck

RC2512 Model

Features BenefitsSurpassed rugged industrystandards


Factory assembled Saves customer set-up time and money.

5 Year gearbox warranty Shows confidence in gearbox integrity.

160 HP Divider gearboxand 75 HP wing gearboxes

A rugged heavy built gearboxs capable of handling heavy cutting applications.


Input driveline: Cat. 4 CV Driveline is matched just right for capacity of tractor. Constant velocity (CV) U-jointallows for 80 degree turns without doing damage to the driveline.

Easy greasable drivelines Drivelines have access holes for greasing the U-joints and to grease the inner profiles.

2 Plate slip-clutch Protects drivelines and gearboxes by slipping clutches rather than twisting the drivelinewhen impacts are encountered.

16,500 FPM High blade tip speed Allows clean cutting of material and even distribution.

6" Blade overlap Eliminates skipping during turns.

Left wing rotates counterclockwise Better discharge of material. Picks up tractor tracks.

11" Deck height Handles heavy cutting, which reduces balling-up of cut material under the deck.

10 Gauge Stump jumper backedwith a 1" thick mounting bar

Allows cutter to slide over obstructions protecting gearbox output shaft & bottom seal.

10 Gauge smooth deck top Reduces accumulation of debris and is easier and faster to clean.

3/16" Plate side skirt Reduces debris piercing possibilities.

Self-leveling hitch Reduces drawbar wear by keeping hitch level while going through ditches.

Low hitch weight Less drawbar wear. Less ballast required. Works well with lighter tractors.

Single remote hydraulics Easy to operate. Fits most tractors, only one duplex outlet required.

Hinged wing sections,22o down & 45o up while cutting

Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches andhollows can cause uneven cutting.

7/8" Solid hinge rods Gives great strength to the cutter from front to rear, and in the hinge area itself.

Wing transport locks Holds transport wings in the folded-up position in case of hydraulic pressure loss.

Enclosed front to rear dual levelingrods

Dual leveling rods enable the cutter to pull equally on the rear axle during travel overrough terrain. Many competitors only use one leveling rod.

5-Bolt hubs 5-Bolt hubs makes the wheel assembly more durable and longer lasting.

Drain holes in wheel rims Allows water to drain from wheels mounted on folded-up wings.Helps prevent paint deterioration and rusting to the wheel rims.

Spring-cushioned lift cylinder Cushions loads on drawbar.

Replaceable wheel spindles Wheel spindles can be replaced when damaged without replacing the entire axle.Simply remove one bolt to replace damaged spindle.

7/8" Leveling rods Large diameter leveling rods provide superior supporting strength over rough terrain.

Airplane tires with flotation lip Gives better cushion while transporting and provides flotation in soft ground.


84330-725F12/21/12


Table of Contents



85

RC2515 Model






A rugged heavy built gearboxes capable of handling heavy cutting applications.


Input driveline: Cat. 4 CV Driveline is matched just right for capacity of tractor. Constant velocity (CV) U-jointallows for 80 degree turns without doing damage to the driveline.



15,000 FPM High blade tip speed Allows clean cutting of material and even distribution.


11 1/4" Deck height Handles heavy cutting, which reduces balling-up of cut material under the deck.

3/16" Gauge Stump jumper backedwith a 1" thick mounting bar

Allows cutter to slide over obstructions protecting gearbox output shaft & bottom seal.

10 Gauge smooth deck top Reduces accumulation of debris and is easier and faster to clean.

1/4" Plate side skirt Reduces debris piercing possibilities.


Low hitch weight Less drawbar wear. Less ballast required. Works well with lighter tractors.

Dual remote hydraulics Easy to operate. Fits most tractors, only two duplex outlets required to lift wings andchange cutting height separately.

Hinged wing sections Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches andhollows can cause uneven cutting. Wings will hinge 20o down.

7/8" Solid hinge rods Gives great strength to the cutter from front to rear, and in the hinge area itself.






Spring-cushioned lift cylinder Cushions loads on drawbar.

Replaceable wheel spindles Wheel spindles can be replaced when damaged without replacing the entire axle.Simply remove two bolts to replace damaged spindle.


Airplane tires Gives better cushion while transporting and provides flotation in soft ground.

331-101F3/06/14


Table of Contents


* Years 6 & 7 Parts Only

RC3614 & RCM3614 Models

Features BenefitsSurpassed ruggedindustry standards


Factory assembled Saves customer set-up time and money. Adjustments should always be made by dealer.

7 Year gearbox warranty* Shows confidence in gearbox integrity.

250 HP divider gearbox130 HP center & wing gearboxes

A rugged heavy-built gearboxes capable of handling heavy-cutting applications.


2" Output gearbox shaft Large output shaft handles shock loads better.

Input driveline: Cat. 6 CV Holds up to shock loads and harsh mowing conditions.

Easy Greasable drivelines Drivelines have access holes for greasing the U-joints and to grease the inner profiles.

2 or 4 Plate slip-clutch Protects drivelines and gearboxes by slipping clutches rather than twisting the drivelinewhen impacts are encountered.

High blade tip speed Allows clean cutting of material & even distribution. See Specifications for actual FPM.


Good cutting capacity Can cut brushy areas with saplings up to 2".


10 Ga. stump jumper backed with a1" x 4 1/2" thick blade mounting bar

Heavy round stump jumper for protecting the gearbox seal and gearbox output shaft.Can hold up to tough conditions.

Spindle Nut Protected Spindle nut and threads extending beyond the nut are guarded to protect againstdamage from hitting solid objects.

10 gauge smooth deck top Reduces accumulation of debris and is easier and faster to clean.

1/4" side skirt Reduces debris piercing possibilities.


Hinged wing section Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches, andhollows can cause uneven cutting.

1" Solid hinge rod Larger diameter hinge gives greater strength to cutter and hinge area.

Wing transport lock Holds transport wing in the folded-up position in case of hydraulic pressure loss.




Drain holes in wheel rims Allows water to drain from wheels mounted on the folded-up wing.Helps prevent paint deterioration and rusting to the wheel rims.

Spring-cushioned center axle Protects unit from bumps and ground shock, cushions loads on drawbar.


Rephasing lift cylinders Allows cutter to be leveled using hydraulic cylinders verse mechanical turnbuckles.


Double swivel hitch option Great for uneven terrain, reduces drawbar wear. Must use spacer washers on drawbar.

Bar-tite hitch option Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.

Wheel options Laminated tires: Eliminates flats.Airplane tires without foam filling: Give better cushion while transporting.Airplane tires with foam filling: Give better cushion while transporting & can’t go flat.

Deck rings (optional) Keeps blades from damaging the deck.


86330-918F12/17/12

Table of Contents


Rotary Cutters, Folding DeckRC3615 and RCM3615 Models


All Land Pride Rotary Cutters have been designed and tested and meet rigorousvoluntary testing procedures.

Factory assembled Arrives for quick and easy set-up. Minimal time is wasted setting or prepping the unit.



A rugged heavy built gearboxs capable of handling heavy cutting applications.

Gearbox seal protection Gearbox bottom seal protection for longer bearing life.

Smooth Top Design Allows for easy cleaning of deck.

Low tongue weight Ideal for smaller HP tractors by reducing the amount of weight on the drawbar.

Narrow tongue construction Allows for a tighter turning radius.

Input Driveline: Cat. 5 CV Driveline is matched just right for capacity of tractor. Constant velocity (CV) U-jointallows for 80 degree turns without doing damage to the driveline.

Cat. 5 intermediate & Cat. 4 wingdrivelines with slip-clutches

Driveline is sized right for the intended cutting capacity. Slip-clutch will slip under loadinstead of twisting the driveline.

Slip-clutch drivelines Slip-clutches are designed to slip to minimize twist damage to the driveline profiles.

High Blade tip speed15,000 FPM Wing RC361515,268 FPM Center RC361514,620 FPM Wing RCM361515,578 FPM Center RCM3615

Allows clean cutting of material.


Left wing rotates clockwise Better discharge of material. Picks up tractor tracks.

3/16" Round stump jumper Standard thick stump jumper material keeps damage to a minimum.

1/4" Sidewall thickness Increased thickness reduces damage from objects being thrown into deck sidewalls.


Hinged wing sections Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches andhollows can cause uneven cutting.

1" Solid hinge rods Larger diameter hinge rod gives greater strength to the cutter from front to rear, and inthe hinge area itself.

Wing transport locks Wing transport locks securely hold the wings in the folded position in case of hydraulicfailure.


Dual leveling rods enable the cutter to pull equally on the rear axle during travel overrough terrain.


Spring cushioned center-axle Protects unit from bumps and ground shock.

Replaceable wheel spindles Wheel spindles can be replaced when damaged without replacing entire axleassembly.

Wheel options Laminated tires: Eliminates flats.Airplane tires without foam filling: Give better cushion while transporting.Airplane tires with foam filling: Give better cushion while transporting and can’t goflat.

Double swivel hitch option Great for uneven terrain, reduces drawbar wear. Hitch pivots freely up and down andpivots about the tractor drawbar.



87330-502F2/12/13


Table of Contents






Factory assembled Saves customer set-up time and money. Adjustments should always be made by dealer.


250 HP divider gearbox130 HP center & wing gearboxes

A rugged heavy-built gearboxes capable of handling heavy-cutting applications.


2" Output gearbox shaft Large output shaft handles shock loads better.

Input driveline: Cat. 6 CV Holds up to shock loads and harsh mowing conditions.

Easy Greasable drivelines Drivelines have access holes for greasing the U-joints and to grease the inner profiles.

2 or 4 Plate slip-clutch Protects drivelines and gearboxes by slipping clutches rather than twisting the drivelinewhen impacts are encountered.

High blade tip speed Allows clean cutting of material & even distribution. See Specifications for actual FPM.


Good cutting capacity Can cut brushy areas with saplings up to 2".


10 Ga. stump jumper backed with a1" x 4 1/2" thick blade mounting bar


Spindle Nut Protected Spindle nut and threads extending beyond the nut are guarded to protect againstdamage from hitting solid objects.

10 gauge smooth deck top Reduces accumulation of debris and is easier and faster to clean.

1/4" side skirt Reduces debris piercing possibilities.


Hinged wing sections Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches, andhollows can cause uneven cutting.

1" Solid hinge rods Larger diameter hinge gives greater strength to cutter and hinge area.






Spring-cushioned center axle Protects unit from bumps and ground shock, cushions loads on drawbar.


Rephasing lift cylinders Allows cutter to be leveled using hydraulic cylinders verse mechanical turnbuckles.


Double swivel hitch option Great for uneven terrain, reduces drawbar wear. Must use spacer washers on drawbar.


Wheel options Laminated tires: Eliminates flats.Airplane tires without foam filling: Give better cushion while transporting.Airplane tires with foam filling: Give better cushion while transporting & can’t go flat.

Deck rings (optional) Keeps blades from damaging the deck.


88330-841F12/03/12

Table of Contents




RC4015 and RCM4015 Models

Features Benefits


All Land Pride Rotary Cutters have been designed and tested and meet rigorousvoluntary testing procedures.

Factory assembled Arrives for quick and easy set-up. Minimal time is wasted setting or prepping the unit.



They are rugged heavy built gearboxes capable of handling heavy cutting applications.


Smooth Top Design Allows for easy cleaning of deck.

Low tongue weight Ideal for smaller HP tractors by reducing the amount of weight on the drawbar.

Narrow tongue construction Allows for a tighter turning radius.

Input Driveline: Cat. 5 CV Driveline is matched just right for capacity of tractor. Constant velocity (CV) U-jointallows for 80 degree turns without doing damage to the driveline.

Cat. 5 intermediate & Cat. 4 wingdrivelines with slip-clutches


Slip-clutch drivelines Slip-clutches are designed to slip to minimize twist damage to the driveline profiles.

High blade tip speed (SeeSpecifications for actual FPM)



Left wing rotates clockwise Better discharge of material. Picks up tractor tracks.

3/16" Round stump jumper Standard thick stump jumper material keeps damage to a minimum.

1/4" Sidewall thickness Increased thickness reduces damage from objects being thrown into deck sidewalls.


Hinged wing sections Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches andhollows can cause uneven cutting.

1" Solid hinge rods Larger diameter hinge rod gives greater strength to the cutter from front to rear, and inthe hinge area itself.

Wing transport locks Wing transport locks securely hold the wings in the folded position in case of hydraulicfailure.

Enclosed front to rear dualleveling rods

Dual leveling rods enable the cutter to pull equally on the rear axle during travel overrough terrain.


Spring cushioned center-axle Protects unit from bumps and ground shock.

Replaceable wheel spindles Wheel spindles can be replaced when damaged without replacing entire axleassembly.

Wheel options Laminated tires: Eliminates flats.Airplane tires without foam filling: Give better cushion while transporting.Airplane tires with foam filling: Give better cushion while transporting and can’t goflat.

Double swivel hitch option Great for uneven terrain, reduces drawbar wear. Hitch pivots freely up and down andpivots about the tractor drawbar.



89330-845F2/12/13


Table of Contents







Fully welded deck Fully welded deck adds strength.

7 Year gearbox warranty* Shows confidence in gearbox.

250 HP Divider gearbox210 HP center & wing gearboxes



2 3/8" Output gearbox shaft Large output shaft handles shock loads better.

Cat. 5 Input driveline Holds up to shock loads and harsh mowing conditions.

Star profile drivelines Star profile spreads load out to many points on the shaft. More apt to resist bending andtwisting under shock loads and harsh mowing conditions.



High blade tip speed(See specifications for actual FPM)

Allows for a clean cut of material and even distribution.

6" Blade overlap Generous blade overlap eliminates skipping, especially in turns.


10 1/2" Deck height Handles heavy cutting, which reduces balling-up of cut material under the deck.

3/16" Stump jumper backedwith a 1" thick mounting bar

Heavy round stump jumper with bottom gearbox seal protector. Can hold up to toughconditions.

3/16" Deck thickness Heavy enough to handle conditions but not weigh unit down.

Self-leveling pull-type hitch Reduces drawbar wear by keeping hitch level while going through ditches.

Hinged wing section Allow cutter to follow terrain. Ideal for rough ground where hillsides, ditches and hollowscan cause uneven cutting.

1" Solid hinge rods Larger diameter hinge rod gives greater strength to the cutter from front to rear, and in thehinge area itself.

Wing transport lock Safety feature. Holds wing section up in case of hydraulic pressure loss.



Drain holes in wheel rims Allows water to drain from wheels mounted on the folded-up wing.Helps prevent paint deterioration and rusting to the wheel rims.

5" Square rear axle tubing Heavy axle to handle harsh conditions.

Spring-cushioned center-axle Protects unit from bumps and ground shock.

Replaceable wheel spindles Wheel spindles can be replaced when damaged without replacing the entire axle. Simplyremove two bolts to replace damaged spindle.

Double swivel hitch Great for uneven terrain, reduces drawbar wear.

Bar-tite hitch Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.

5 or 6 Wheel option Dual wheels on the outer wing are ideal when mowing in areas where the wing needs toflex up hill. The outer wheel rides farther up the embankment and keeps the deck fromgouging.The extra wheel on the outer wing deck provides better load distribution.

Wheel options Laminated tires: Eliminates flats.Airplane tires without foam filling: Give better cushion while transporting.Airplane tires with foam filling: Give better cushion while transporting and can’t go flat.

Deck rings (optional) 1/2" x 3" full welded deck ring keeps blades from damaging the deck.


90330-117F3/13/12

Table of Contents








Factory assembled Saves customer set-up time and money.Fully welded deck Fully welded deck adds strength.7 Year gearbox warranty* Shows confidence in out gearboxes.250 HP Divider gearbox210 HP center & wing gearboxes


Gearbox seal protection Gearbox bottom seal protection for longer bearing life.Cat. 5 Input driveline Holds up to shock loads and harsh mowing conditions.

Fits wide range of tractors including high horsepower tractors.Star profile drivelines Star profile spreads load out to many points on the shaft. More apt to resist bending and

twisting under shock loads and harsh mowing conditions.Easy greasable drivelines Drivelines have access holes for greasing the U-joints and to grease the inner profiles.4 Plate slip-clutch Protects drivelines and gearboxes by slipping clutches rather than twisting the driveline

when impacts are encountered.High blade tip speed 540 rpm: Center: 17,377 fpm, Wings: 17,329 fpm

1000 rpm: Center: 18,165 fpm, Wings: 15,013 fpmAllows for a clean cut of material and even distribution.

6" Blade overlap Generous blade overlap eliminates skipping, especially in turns.High cutting capacity Can cut brushy areas with saplings up to 3".Left wing rotates counterclockwise Better discharge of material. Picks up tractor tracks.10 1/2" Deck height Handles heavy cutting, which reduces balling-up of cut material under the deck.3/16" Stump jumper backed with a 1"thick mounting bar


3/16" Deck thickness Heavy enough to handle conditions but not weigh unit down.Self-leveling pull-type hitch Reduces drawbar wear by keeping hitch level while going through ditches.Hinged wing sections Allow cutter to follow terrain. Ideal for rough ground where hillsides, ditches and hollows

can cause uneven cutting.1" Solid hinge rods Larger diameter hinge rod gives greater strength to the cutter from front to rear, and in the

hinge area itself.Wing transport locks Safety feature. Holds wing sections up in case of hydraulic pressure loss.Enclosed front to rear dual levelingrods


Drain holes in wheel rims Allows water to drain from wheels mounted on the folded-up wings.Helps prevent paint deterioration and rusting to the wheel rims.

5" Square rear axle tubing Heavy axle to handle harsh conditions.Spring-cushioned center-axle Protects unit from bumps and ground shock.Replaceable wheel spindles Wheel spindles can be replaced when damaged without replacing the entire axle. Simply

remove two bolts to replace damaged spindle.Double swivel hitch Great for uneven terrain, reduces drawbar wear.Bar-tite hitch Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.Wheel options Laminated tires: Eliminates flats.

Airplane tires without foam filling: Give better cushion while transporting.Airplane tires with foam filling: Give better cushion while transporting and can’t go flat.

Deck rings (optional) 1/2" x 3" full welded deck ring keeps blades from damaging the deck.Shredder Blades (Optional) Ideal for cutting residue into smaller pieces.

Replaces blade and stump jumper configuration.Baffles (Accessory) Maintain3s shredded material in each section of the cutter for a consistent

discharge from the rear of each deck.

91318-474F3/13/12


Table of Contents




RC(M)5510 & RC(M)6510 Models



Factory assembled Saves customer set-up time and money.7 Year gearbox warranty* Shows confidence in gearbox integrity.250 HP Divider gearbox210 HP center & wing gearboxes


Gearbox Seal Protection Gearbox bottom seal protection for longer bearing life.2 3/8" Output gearbox shaft Large output shaft handles shock loads better.Input driveline: Cat. 5 CV Holds up to shock loads and harsh mowing conditions.Cat. 5 intermediate & Cat. 4 wingdrivelines with slip-clutches


Star profile drive shafts Star profile spreads load out to many points on the shaft. More apt to resist bending andtwisting under shock loads and harsh mowing conditions.

Easy Greasable drivelines Drivelines have access holes for greasing the U-joints and to grease the inner profiles.4 Plate slip-clutch Protects drivelines and gearboxes by slipping clutches rather than twisting the driveline

when impacts are encountered.High blade tip speed(See specifications for actual FPM)


6" Blade overlap Eliminates skipping during turns.High cutting capacity 55 Series

65 SeriesCan cut brushy areas with saplings up to 4".Can cut brushy areas with saplings up to 4 1/2".

Pre-cut chamber Allows grass and vegetation to stand back up prior to cutting for a more complete cut.12" Deck height Handles heavy cutting, which reduces balling-up of cut material under the deck.3/16" Stump jumper backedwith a 1" thick mounting bar


10 gauge smooth deck top Reduces accumulation of debris and is easier and faster to clean.7 Gauge smooth deck bottom Heavy deck design holds up to harsh conditions. No bottom obstructions.Replaceable 1/4" side skirt Reduces debris piercing possibilities. Can be replaced if damaged.Self-leveling hitch Reduces drawbar wear by keeping hitch level while going through ditches.Hinged wing section Allow you to shape the cutter to the job. Ideal for rough ground where hillsides, ditches

and hollows can cause uneven cutting.Left side weight box Serves as counterweight for balance when raising the wing.1" Solid hinge rods Larger diameter hinge rod gives greater strength to the cutter from front to rear, and in

the hinge area itself.Wing transport lock Holds transport wing in the folded-up position in case of hydraulic pressure loss.Enclosed front to rear dual levelingrods


5-Bolt hubs 5-Bolt hubs makes the wheel assembly more durable and longer lasting.Drain holes in wheel rims Allows water to drain from wheels mounted on the folded-up wing.

Helps prevent paint deterioration and rusting to the wheel rims.Spring-cushioned center-axle Protects unit from bumps and ground shock.Replaceable wheel spindles Wheel spindles can be replaced when damaged without replacing the entire axle. Simply

remove two bolts to replace damaged spindle.Double swivel hitch Great for uneven terrain, reduces drawbar wear.Bar-Tite Hitch option Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.Wheel options Laminated tires: Eliminates flats.


Walking Tandem option Better flotation and smoother ride on rougher terrain.Deck rings (optional) 1/2" x 3" full welded deck ring keeps blades from damaging the deck.

92330-057F2/12/13

Table of Contents







Factory assembled Saves customer set-up time and money.7 Year gearbox warranty* Shows confidence in gearbox integrity.Gearbox Seal Protection Gearbox bottom seal protection for longer bearing life.250 HP Divider gearbox210 HP center & wing gearboxes


2 3/8" Output gearbox shaft Large output shaft handles shock loads better.Input driveline: Cat. 5 CV Holds up to shock loads and harsh mowing conditions.Cat. 5 intermediate & Cat. 4 wingdrivelines with slip-clutches


Star profile drive shafts Star profile spreads load out to many points on the shaft. More apt to resist bending andtwisting under shock loads and harsh mowing conditions.

Easy Greasable drivelines Drivelines have access holes for greasing the U-joints and to grease the inner profiles.4 Plate slip-clutch Protects drivelines and gearboxes by slipping clutches rather than twisting the driveline

when impacts are encountered.High blade tip speed(See Specifications for actual FPM)




Pre-cut chamber Allows grass and vegetation to stand back up prior to cutting for a more complete cut.12" Deck height Handles heavy cutting, which reduces balling-up of cut material under the deck.Left wing rotates clockwise Better discharge of material. Picks up tractor tracks.2" to 14" Cutting height Covers a wide range of cutting conditions.3/16" Stump jumper backed with a1" thick mounting bar


10 gauge smooth deck top Reduces accumulation of debris and is easier and faster to clean.7 Gauge smooth deck bottom Heavy deck design holds up to harsh conditions. No bottom obstructions.Replaceable 1/4" wing sidewall Reduces debris piercing possibilities. Can be replaced if damaged.Reversible/replaceable skid shoes Can be reversed for extended life and replaced when damaged or worn out.Self-leveling hitch Reduces drawbar wear by keeping hitch level while going through ditches.Hinged wing sections Allow you to shape the cutter to the job. Ideal for rough ground where hillsides, ditches

and hollows can cause uneven cutting.1" Solid hinge rods Larger diameter hinge rod gives greater strength to the cutter from front to rear, and in

the hinge area itself.Wing transport locks Holds transport wings in the folded-up position in case of hydraulic pressure loss.Enclosed front to rear dual levelingrods


5-Bolt hubs 5-Bolt hubs makes the wheel assembly more durable and longer lasting.Drain holes in wheel rims Allows water to drain from wheels mounted on folded-up wings.

Helps prevent paint deterioration and rusting to the wheel rims.Spring-cushioned center-axle Protects unit from bumps and ground shock.Replaceable wheel spindles Wheel spindles can be replaced when damaged without replacing the entire axle.

Simply remove two bolts to replace damaged spindle.Double swivel hitch option Great for uneven terrain, reduces drawbar wear.Bar-tite hitch option Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.Wheel options Laminated tires: Eliminates flats.


Walking Tandem option Better flotation and smoother ride on rougher terrain.Deck rings (optional) 1/2" x 3" full welded deck ring keeps blades from damaging the deck.


93318-721F2/12/13


Table of Contents










Easy Greasable drivelines Drivelines have access holes for greasing the U-joints and to grease the inner profiles.2 or 4 Plate slip-clutch Protects drivelines and gearboxes by slipping clutches rather than twisting the driveline


Allows clean cutting of material and even distribution.



12" Deck height Handles heavy cutting, which reduces balling-up of cut material under the deck.3/16" Stump jumper backed with a1" thick mounting bar


10 Gauge smooth deck top Reduces accumulation of debris and is easier and faster to clean.7 Gauge smooth deck bottom Heavy deck design holds up to harsh conditions. No bottom obstructions.Replaceable 1/4" side skirt Reduces debris piercing possibilities. Can be replaced if damaged.Self-leveling hitch Reduces drawbar wear by keeping hitch level while going through ditches.Hinged wing section Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches and

hollows can cause uneven cutting.1" Solid hinge rods Larger diameter hinge rod gives greater strength to the cutter from front to rear, and in

the hinge area itself.Wing transport lock pin Holds transport wing in the folded-up position in case of hydraulic pressure loss.Enclosed front to rear dual levelingrods


5-Bolt hubs 5-Bolt hubs makes the wheel assembly more durable and longer lasting.Drain holes in wheel rims Allows water to drain from wheels mounted on folded-up wing.

Helps prevent paint deterioration and rusting to the wheel rims.Spring-cushioned trailing arms Provides independent suspension, cushions loads on drawbar.Replaceable wheel spindles Wheel spindles can be replaced when damaged without replacing the entire axle.

Simply remove one bolt to replace damaged spindle.Pre-cut chamber Allows grass and vegetation to stand back up prior to cutting for a more complete cut.Reinforced leading edge Front of deck can withstand heavy brush and saplings.Collapsible leveling rods Prevents damage and failure to leveling rods.1" Leveling rods Large diameter leveling rods provide superior supporting strength over rough terrain.Double swivel hitch Great for uneven terrain, reduces drawbar wear.Bar-tite hitch Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.Wheel options Laminated tires: Eliminates flats.




94330-539F2/12/13

Table of Contents











Easy Greasable drivelines Drivelines have access holes for greasing the U-joints and to grease the inner profiles.2 or 4 Plate slip-clutch Protects drivelines and gearboxes by slipping clutches rather than twisting the driveline





12" Deck height Handles heavy cutting, which reduces balling-up of cut material under the deck.Left wing rotates clockwise Better discharge of material. Picks up tractor tracks.3/16" Stump jumper backed with a1" thick mounting bar


10 gauge smooth deck top Reduces accumulation of debris and is easier and faster to clean.7 Gauge smooth deck bottom Heavy deck design holds up to harsh conditions. No bottom obstructions.Replaceable 1/4" side skirt Reduces debris piercing possibilities. Can be replaced if damaged.Self-leveling hitch Reduces drawbar wear by keeping hitch level while going through ditches.Hinged wing sections Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches and

hollows can cause uneven cutting.1" Solid hinge rods Larger diameter hinge rod gives greater strength to the cutter from front to rear, and in

the hinge area itself.Wing transport lock pins Holds transport wings in the folded-up position in case of hydraulic pressure loss.Enclosed front to rear dual levelingrods



Helps prevent paint deterioration and rusting to the wheel rims.Spring-cushioned trailing arms Provides independent suspension, cushions loads on drawbar.Replaceable wheel spindles Wheel spindles can be replaced when damaged without replacing the entire axle.

Simply remove one bolt to replace damaged spindle.Pre-cut chamber Allows grass and vegetation to stand back up prior to cutting for a more complete cut.Reinforced leading edge Front of deck can withstand heavy brush and saplings.Collapsible leveling rods Prevents damage and failure to leveling rods.1" Leveling rods Large diameter leveling rods provide superior supporting strength over rough terrain.Double swivel hitch option Great for uneven terrain, reduces drawbar wear.Bar-tite hitch option Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.Wheel options Laminated tires: Eliminates flats.




95330-323F2/12/13


Table of Contents


Designs, specifications, features and information are subject to change without notice.* Years 6 & 7 Parts Only

RCB6610 & RCBM6610 Models





Gearbox Seal Protection Gearbox bottom seal protection for longer bearing life.2 3/8" Output gearbox shaft Large output shaft handles shock loads better.Input driveline: Cat. 5 CV Holds up to shock loads and harsh mowing conditions.Easy Greasable drivelines Drivelines have access holes for greasing the U-joints and to grease the inner profiles.2 or 4 Plate slip-clutch Protects drivelines and gearboxes by slipping clutches rather than twisting the driveline



6" Blade overlap Eliminates skipping during turns.High cutting capacity \ Can cut brushy areas with saplings up to 4 1/2".12" Deck height Handles heavy cutting, which reduces balling-up of cut material under the deck.3/16" Stump jumper backed with a 1"thick mounting plate


Spindle Nut Protected Spindle nut and threads extending beyond the nut are guarded to protect against damagefrom hitting solid objects.

10 gauge smooth deck top Reduces accumulation of debris and is easier and faster to clean.7 Gauge smooth deck bottom Heavy deck design holds up to harsh conditions. No bottom obstructions.Replaceable 1/4" side skirt Reduces debris piercing possibilities. Can be replaced if damaged.Self-leveling hitch Reduces drawbar wear by keeping hitch level while going through ditches.Hinged wing section Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches and hollows

can cause uneven cutting.1" Solid hinge rods Larger diameter hinge rod gives greater strength to the cutter and in the hinge area itself.Wing transport lock pin Holds transport wing in the folded-up position in case of hydraulic pressure loss.Enclosed front to rear dual levelingrods


5-Bolt hubs 5-Bolt hubs makes the wheel assembly more durable and longer lasting.Drain holes in wheel rims Allows water to drain from wheels mounted on folded-up wing.

Helps prevent paint deterioration and rusting to the wheel rims.Spring-cushioned trailing arms Provides independent suspension, cushions loads on drawbar.Replaceable wheel spindles Wheel spindles can be replaced when damaged without replacing the entire axle. Simply

remove one bolt to replace damaged spindle.Pre-cut chamber Allows grass and vegetation to stand back up prior to cutting for a more complete cut.Slow moving vehicle sign (SMV) Great for transporting on roadways and mowing along side roads.Rear axle pull rings Aids in getting unit out of soft ground conditions.Dual-acting wing cylinder Allows wing to be folded inward beyond 90o for a narrow 7'-5 1/4" transport width.Greasable wing folding hinge Provides for a long hinge life and allows the wing to fold up and down with less stress.Reinforced leading edge Front of deck can withstand heavy brush and saplings.Collapsible leveling rods Prevents damage and failure to leveling rods.1" Leveling rods Large diameter leveling rods provide superior supporting strength over rough terrain.Double swivel hitch option Great for uneven terrain, reduces drawbar wear. Must use spacer washers on drawbar.Bar-tite hitch option Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.Wheel options Laminated tires: Eliminates flats.

Airplane tires without foam filling: Give better cushion while transporting.Airplane tires with foam filling: Give better cushion while transporting & can’t go flat.

Deck rings (optional) 1/2" x 3" full welded deck ring keeps blades from damaging the decks.Mechanical Winch (optional) Aids in folding the cutter in the event of hydraulic failure.Reverse Gearbox Rotation on Center& Wing Deck (optional)

Throws debris away from the road when cutting along side a road.

96330-584F3/13/12

Table of Contents



Designs, specifications, features and information are subject to change without notice.* Years 6 & 7 Parts Only

RCB6615 & RCBM6615 Models



Factory assembled Saves customer set-up time and money. Adjustments should always be made by dealer.7 Year gearbox warranty* Shows confidence in gearbox integrity.250 HP Divider gearbox210 HP center & wing gearboxes


Gearbox Seal Protection Gearbox bottom seal protection for longer bearing life.2 3/8" Output gearbox shaft Large output shaft handles shock loads better.Input driveline: Cat. 5 CV Holds up to shock loads and harsh mowing conditions.Easy Greasable drivelines Drivelines have access holes for greasing the U-joints and to grease the inner profiles.2 or 4 Plate slip-clutch Protects drivelines and gearboxes by slipping clutches rather than twisting the driveline

when impacts are encountered.High blade tip speed Allows clean cutting of material and even distribution. See Specifications for actual FPM6" Blade overlap Eliminates skipping during turns.High cutting capacity Can cut brushy areas with saplings up to 4 1/2".12" Deck height Handles heavy cutting, which reduces balling-up of cut material under the deck.Left wing rotates clockwise Better discharge of material. Picks up tractor tracks.3/16" Stump jumper backed with a 1"thick mounting plate


Spindle Nut Protected Spindle nut and threads extending beyond the nut are guarded to protect against damagefrom hitting solid objects.

10 gauge smooth deck top Reduces accumulation of debris and is easier and faster to clean.7 Gauge smooth deck bottom Heavy deck design holds up to harsh conditions. No bottom obstructions.Replaceable 1/4" side skirt Reduces debris piercing possibilities. Can be replaced if damaged.Self-leveling hitch Reduces drawbar wear by keeping hitch level while going through ditches.Hinged wing sections Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches and hollows

can cause uneven cutting.1" Solid hinge rods Larger diameter hinge rod gives greater strength to the cutter and in the hinge area itself.Wing transport lock pins Holds transport wings in the folded-up position in case of hydraulic pressure loss.Enclosed front to rear dual levelingrods



Helps prevent paint deterioration and rusting to the wheel rims.Spring-cushioned trailing arms Provides independent suspension, cushions loads on drawbar.Replaceable wheel spindles Wheel spindles can be replaced when damaged without replacing the entire axle. Simply

remove one bolt to replace damaged spindle.Pre-cut chamber Allows grass and vegetation to stand back up prior to cutting for a more complete cut.Slow moving vehicle sign (SMV) Required for transporting on roadways and mowing along side roads.Rear axle pull rings Aids in getting unit out of soft ground conditions.Rephasing wheel cylinders Allows the cutter to be levelled using hydraulic cylinders verse mechanical turnbuckles.Independent wing hydraulics Wing hydraulics are plumbed independently to allow the user to raise one wing at a time,

which can aid in going through narrow spaces.Dual-acting wing cylinders Allows wings to be folded inward beyond 90o for a narrow 7'-5 1/4" transport width.Greasable wing folding hinges Provides for a long hinge life and allows the wings to fold up and down with less stress.Reinforced leading edge Front of deck can withstand heavy brush and saplings.Collapsible leveling rods Prevents damage and failure to leveling rods.1" Leveling rods Large diameter leveling rods provide superior supporting strength over rough terrain.Double swivel hitch option Great for uneven terrain, reduces drawbar wear. Must use spacer washers on drawbar.Bar-tite hitch option Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.Walking tandem axle option Allows for a smoother pull in undulating terrain.Wheel options Laminated tires: Eliminates flats.


Deck rings (optional) 1/2" x 3" full welded deck ring keeps blades from damaging the deck.Mechanical Winch (optional) Aids in folding the cutter in the event of hydraulic failure.

97330-339F3/13/12

Table of Contents
Rotary Tillers

Rotary TillersRTR05 Series

Features Benefits

American made Many tillers are imported. American made means better parts availability.

Reverse tilling action Reverse action ‘sucks’ tiller into ground, does not walk on top of hard ground likeforward rotation tillers can.

Tractor HP range 17-25 HP

2 Year Gearbox Warranty 2 Years on housing, seals, & bearings. (Shows our confidence in the product.)

Working widths 42" and 50" to meet specific customer needs.

5" Digging depth For deep soil penetration.

Clevis lower hitch Provides additional strength and easy one person hook-up.

Fits Land Pride Quick-Hitch Allows for quick and easy one person hook-up.Additional PTO driveline may be required.

Adjustable parking stand Allows for easy hook-up and storage.

Adjustable skid shoes Control depth with seven adjustments.

Formed rear deflector Keeps dirt in and leaves a level finish. Forming gives deflector additional strength.Adjustable deflector allows for various finish results.

Front deflector Front deflector is flexible to take the beating from rocks or debris.

4 “C” shaped heat-treatedtines per flange

‘C’ Shaped tines require less HP to move through the ground.

1 3/4" Solid rotor shaft For strength.

13" Rotor swing diameter For deep tilling and turning the soil over faster.

Double lip seal on rotor bearing Double lip seal helps keep the dirt out and the grease in.

Fully shielded shear pin orslip-clutch driveline

Protects the gearbox and rotor shaft upon hitting obstructions. Slip-clutch saves havingto replace shear-pins.

#80 Drive chain enclosed in oil bath Heavy drive chain stretches less, and oil bath keeps wear to a minimum.

Stamped chain cover Stamped forming gives the chain cover strength.


98311-464F5/12/09

Table of Contents


Rotary TillersRTA12 Series

Features BenefitsAmerican made American made means better parts availability. Many tillers are imported.

Tractor HP range 42" & 50"58" & 60"

74"

15-35 HP20-40 HP25-50 HP

3 Year Gearbox Warranty 3 Years on housings, seals, bearings. Shows our confidence in the product.

42", 50", 58", 66" & 74"Working widths

A wide range of widths are available to meet specific customer needs.

6 1/2" Digging depth For deep soil penetration.

Formed plate steel upper hitch Plate steel is stronger than flat bar type hitch.


Offset Capabilities Allows tiller to work closer to objects such as fence lines, buildings and trees.

Fits Land Pride Quick-Hitch Allows for quick and easy one person hook-up.Does not offset to the left with Quick-Hitch.

Adjustable Parking stand Allows for easy hook-up and storage.

Adjustable skid shoes Control depth with various settings.

Formed and reinforcedrear deflector

Forming gives deflector additional strength. Adjustable deflector allows for various finishresults.

4 ‘C’ Shaped heat-treatedtines per flange


Solid steel rotor shaft Solid steel shaft gives rotor extra strength.



Fully shielded slip-clutch driveline Protects the gearbox and rotor shaft upon hitting obstructions.Slip-clutch saves having to replace shear-pins.

#80 Drive chainenclosed in oil bath

Heavy drive chain stretches less, and oil bath keeps wear to a minimum.

Stamped chain case cover Stamped forming gives the chain cover strength.




Table of Contents


Features BenefitsAmerican made American made means better parts availability. Many tillers are imported.

Tractor HP range 42" & 50"58" & 60"

74"

15-35 HP20-40 HP25-50 HP


3 year Gearbox Warranty 3 Years on housing, seals, & bearings. shows our confidence in the product.

42", 50", 58", 66" & 74"Working widths

A wide range of widths are available to meet specific customer needs.


Bent plate steel upper hitch Plate steel is stronger than flat bar type hitch.


Offset Capabilities Allows tiller to work closer to objects such as fence lines, buildings and trees.

Fits Land Pride Quick-Hitch Allows for quick and easy one person hook-up.(Offset cannot be used with Quick-Hitch.)

Adjustable parking stand Allows for easy hook-up and storage.

Adjustable skid shoes Control depth with seven adjustments.

Formed and reinforced reardeflector

Keeps dirt in and leaves a level finish. Forming gives deflector additional strength.Adjustable deflector allows for various finish results.


4 ‘C’ shaped heat-treatedtines per flange


Solid steel rotor shaft Solid steel shaft gives rotor extra strength.

15" Rotor swing diameter For deep tilling and turns the soil over faster.


Fully shielded slip-clutch driveline Protects the gearbox and rotor shaft upon hitting obstructions.Slip-clutch saves having to replace shear-pins.



Stamped chain case cover Stamped forming gives the chain cover strength.


100311-785F end12/31/12

Table of Contents


Rotary TillersRTA15 Series

Features Benefits


Tractor HP range 17 - 50 HP; Dependent upon width and Series of tiller.

Gearbox warranty 5 Year on housing, gears, seals and bearings. Shows our confidence in the product.

Working widths 50", 58", 66" & 74" to meet specific customer needs.


Plate steel upper hitch Plate steel is stronger than flat bar type hitch.

Clevis hitch Provides additional strength and easy one person hook-up.

Hitch sideshift capabilities Sideshift tiller to cover right tire track. Gearbox slides with tiller.

Sideshift dimensions 50" Width58" Width66" Width74" Width

25" - 25" Std. 12" - 38" Max. Right 31" - 19" Max. Left29" - 29" Std. 12" - 46" Max. Right 35" - 23" Max. Left33" - 33" Std. 12" - 54" Max. Right 39" - 27" Max. Left37" - 37" Std. 16" - 58" Max. Right 43" - 31" Max. Left

Fits Land Pride Quick-Hitch Allows for quick and easy one person hook-up.Does not offset to the left with Quick-Hitch.

Adjustable Parking Stand Allows for easy hook-up and storage.

Adjustable Skid Shoes Control depth with various settings.


Forming gives deflector additional strength. Adjustable deflector allows for variousfinish results.



RTA1550 & RTA15581 3/4" Solid steel rotor shaft

RTA1566 & RTA15742" Solid steel rotor shaft

Solid steel shaft for strength.



Cat. 3 heavy-duty fully shieldedshear pin or slip-clutch driveline

Protects gearbox and rotor shaft upon hitting obstructions. Slip-clutch saves having toreplace shear-pins.




Fully shielded shear pinor slip-clutch driveline

Protects the gearbox and rotor shaft upon hitting obstructions. Slip-clutch saveshaving to replace shear-pins.


101311-252F end6/23/10


Table of Contents


Features Benefits



Tractor HP Range 17 - 50 HP; Dependent upon width and Series of tiller.

Gearbox Warranty 5 Years on housings, seals, bearings. Shows our confidence in the product.

Working widths 50", 58", 66" & 74" To meet specific customers needs.


Plate steel upper hitch Plate steel is stronger than flat bar type hitch.


Hitch sideshift capabilities Sideshift tiller to cover right tire track. Gearbox slides with tiller.

Sideshift dimensions 50" Width58" Width66" Width74" Width

25" - 25" Std. 12" - 38" Max. Right 31" - 19" Max. Left29" - 29" Std. 12" - 46" Max. Right 35" - 23" Max. Left33" - 33" Std. 12" - 54" Max. Right 39" - 27" Max. Left37" - 37" Std 16" - 58" Max. Right 43" - 31" Max. Left

Fits Land Pride Quick-Hitch Allows for quick & easy one person hook-up. Offset cannot be used with Quick-Hitch.




Forming gives deflector additional strength. Adjustable deflector allows for variousfinish results.




RTR1550 & RTR15581 3/4" Solid steel rotor shaft

RTR1566 & RTR15742" Solid steel rotor shaft

Solid steel shaft for strength.



Cat. 3 heavy-duty fully shieldedshear pin or slip-clutch driveline






102311-431F end6/23/10

Table of Contents


Rotary TillersRTA20 & RTR20 Series

Features Benefits


20 Series Fills the gap between our 15 and 25 Series Tillers, both in size and price.

RTR Reverse rotation modelor RTA forward rotation model

Land Pride has the market on reverse rotation. This brings in a quality tiller at a moreaffordable price for landscapers. We offer forward rotation for contractors who want it.

Reverse tilling action Reverse action “sucks” tiller into ground, does not walk on top of hard ground like forwardrotation tillers can.

Gearbox Warranty 5 Years Parts and Labor. Shows our confidence in the product.

Working Widths 64" & 72" Meets a wide range of customer needs.

Integral Hitch Upper hitch, gearbox and gearbox mount brought together to form a stronger overall hitchframe.

Clevis Style Lower Hitch Allows easier hook-up of lower 3-point arms.

Hitch sideshift capability Sideshifts by loosening 6 U-bolts and sliding hitch points and gearbox over. Allowscovering right tire track.

Cat. 1 Hitch fits Land PrideQuick-Hitch

Allows for quick and easy one-person hook-up. Offset is not comparable with Quick-Hitch.

Adjustable Parking Stand Allows for easy hook-up and storage

Adjustable skid shoes Control depth from various settings.

Material separator behindtilling action (RTR only)

3/8" Rods sift the material letting bigger items fall first. Sifted soil falls last burying thebigger items. Attachment is one all welded piece for easy assembly.

Formed rear deflector withsprings

Formed steel gives the rear deflector additional strength. Springs allow deflector to bounceas it hits obstructions.

Six tines standard on RTR20Four tines standard on RTA20with six being optional

Six tines cut through the ground smoother.

“C” Tines C Tines take less horsepower to move through the ground.

17" Rotor swing diameter For deep tilling action.

Double lip seal on rotorbearing

Double lip seal keeps the dirt out and the grease in.

Cat. 3 heavy-duty fullyshielded shear pin orslip-clutch driveline


#80 Drive chain enclosed in oilbath

Heavy-duty drive chain reduces stretching. Oil keeps constant lubrication and holds wearto a minimum.

Easy to adjust chain tightener Cast iron chain tightener is a simple bolt adjustment to keep constant tension on the chain.

Stamped chain cover Stamped forming adds additional strength.

Formed Deck Handles material more efficiently, sheds water.


103311-328F6/11/12


Table of Contents

Rotary TillersRTA25 & RTA35 Series

Features Benefits


Tractor HP Range (RTA25 = 25 - 55 HP) And (RTA35 = 35 - 75 HP)

Gearbox Warranty 3 Years on housing, gears, shafts, seals, bearings. Shows our confidence in the product.

Working widths (RTA25 = 62" & 70") And (RTA35 = 76") To meet specific customer needs

8" Digging depth For extra deep soil penetration and cultivation.

Stamped upper hitch plate Stamped plate adds additional strength to hitch.

Hitch bolted toinside of support

Force is applied downward on top hitch, by bolting hitch to inside of support. Keeps hitchfrom ‘spreading’ outward.

Clevis Style Lower Hitch Allows easier hook-up of lower 3-point arms.

Hitch Offset capability Offset 5" by moving lower hitch points to cover right tire track.

Fits Land PrideQuick-Hitch

Allows for quick and easy one person hook-up. Offset can not be used with Quick-Hitch.



Wear shield or left skid shoe Shield protects lower portion of chain cover from wearing due to dragging in the soil.


Forming gives deflector additional strength. Springs allow deflector to '‘bounce'’ whenobstructions are hit.

Rear gate down pressuresprings (optional)

Forces the rear gate down to level even better. Easy-to-adjust chain tightener Cast ironchain tightener is a simple bolt adjustment to keep constant tension on the chain.

Four or six tines per flange Six tines go through the ground better than four.


Rotor swing diameter (RTA25 = 17") And (RTA35 = 19") For deep tilling action and turning the soil over faster.

Double lip seal on rotorbearings

Double lip seal helps keep the dirt out and the grease in.

Cat. 3 driveline withslip-clutch protection

Heavy driveline for rough conditions. Slip-clutch protects other drive train components andsaves having to replace shear bolts.


Heavy-duty drive chain reduces stretching, oil keeps constant lubrication and holds wearto a minimum.



104311-254F5/12/09

Table of Contents


Rotary TillersRTR2570 Model

Features Benefits


Reverse tilling action Reverse action ‘sucks’ tiller into ground, does not walk on top of hard ground like forwardrotation tillers can.

Tractor HP rating 25-55 HP

Gearbox Warranty 3 Years on housing, gears, shafts, seals, bearings. Shows our confidence in the product.

Working Width

Stamped upper hitch plate Stamped plate adds additional strength to hitch.

Hitch bolted toinside of support

Force is applied downward on top hitch, by bolting hitch to inside of support, keeps hitchfrom spreading outward.

Hitch Offset capability Offset 5" by moving lower hitch points, allows to cover right tire track.


Allows for quick and easy one person hook-up. Cannot be used with offset.


Adjustable skid shoes Control depth from various settings.

Wear shield on left skid shoe Shield protects lower portion of chain cover from wearing due to dragging in the soil.


Formed steel gives the rear deflector additional strength. Springs allow deflector to bounceas it hits obstructions.

Front deflector plate Front deflector plate is flexible to take the beating rocks or debris will give it.

Six tines per flange Six tines go through the ground better than four.


3" O.D. x 1/4" wall tubing withstub shafts on ends

Superior strength in oversize tubing.

17" Rotor swing diameter For deep tilling action.

Double lip seal on rotorbearing

Double lip seal keeps the dirt out and the grease in.

Cat. 3 driveline withslip-clutch protection

Heavy driveline for rough conditions. Slip-clutch protects other drive train components andsaves having to replace shear bolts.

#100 Drive chain enclosed inoil bath

Heavy-duty drive chain reduces stretching. Oil keeps constant lubrication and holds wearto a minimum.

Easy to adjust chain tightener Cast iron chain tightener is a simple bolt adjustment to keep constant tension on the chain.


Spring tines behind tillingaction

Spring tines sift the material letting bigger items fall first. Sifted soil falls last burying thebigger items.


105311-251F6/22/11

Table of Contents
Scarifiers

ScarifiersSF25 Series

Features Benefits

Working widths 60" & 72"

Tractor HP range 25-50 HP

Cat 1 3-point hitch For easy attachment to a wide range of tractors

Four ripping depths Good variation in ripping depth.

Heat treated steel shanks Won’t bend or break.

Replaceable shank tips Can be easily replaced when damaged or worn without having to replace entireshank.

Rear hitch withfloating top link

Allows for second implement to work in conjunction with the Scarifier such as aLandscape Rake. Compatible with Land Pride 15 & 25 Series Rakes and Blades.

5/16" Wall thicknesson the shank tube

High tensile strength to take the pressure from the shanks.

5/16" x 1" Full lengthreinforcement bar

Adds additional strength to shank tube right behind shank where pressure isapplied while dragging through the ground.

Warranty One year parts and labor.


106302-188F6/22/11

Table of Contents
Seed Bed Roller

Seed Bed RollerSBR Series

Features Benefits

Category 1 Three-point hitch or Pull-typeConfigurations.

Matches customers operational and equipment needs.

Three point hitch model is Cat. 1 Quick Hitchcompatible.

Makes for faster and easier hook-up to the tractor.

Standard equipment support stands for boththree-point hitch and pull-type models.

Keeps the hitches up and out of the dirt and ready for easy hook-up.

Optional Pull-type Hitch assembly bolts on andconverts the Three-point model to a Pull-typemodel.

Provides low cost dual hitch capability for added value and operationalversatility.

Indexing dual capability hitch on Pull-typeconfiguration.

Insures easy fit and function for 2" ball or pin and clevis type attachment.

Low maintenance indexing flip-over hitch onpull-type configuration.

Allows operator’s to switch from transport to working position and backagain with ease and keeps costs down.

Notched and ribbed patterned gray iron roller. Provides for optimal seedbed finish and long durable product life.


107322-215F12/17/08

Table of Contents
Seeders,All Purpose Seeder

Seeders, All Purpose SeederAPS15 Series

Features Benefits

1548, 1560 & 1572 = Cat 1 QH1586 = Cat1&2 QH

Fits Land Pride Quick Hitch for easy one person hook-up to tractor.

Seeding WidthAPS1548 & APS1560

48" & 60" seeding width provides capability to maneuver around landscape obstacles andover uneven hilly terrain.

Seeding WidthAPS1572 & APS1586

72" & 86" seeding width provides high productivity over wide areas and flat or gentlysloping terrain.

Machine Weight Heavier unit weight provides for better spike penetration and seed-to-soil contact.

Lift Hooks Lift hooks mounted on each end of seedbox to attach lift straps or chains for easy loadingand unloading.

Water-tight Seedbox Keeps moisture and rodents out of the seedbox.

Large Seedbox Capacity One bushel per foot. Keeps filling to a minimum and increases productivity.

Easy Seedbox Cleanout Simply moving the flute lever to the proper position allows for easy cleanout and removal ofall seeds.

Heavy Duty Hopper Lidwith Stay Open Support

Precision fit to keep water and rodents out and HD construction with integral prop supportkeeps lid from slamming shut in windy conditions.

Seed Splash Guard Prevents seed from being spilled out between the lid and the box during hopper filling.

Precision Grass Seed Cups Proven fluted seed cups for highly accurate seed delivery.

Built-in Agitator Prevents bridging and keeps seed flowing evenly to cups.

Powdered Metal in FlutedSprockets

Helps dissipate any heat buildup from fluted area and plastic seed cup housing.

Easy Seed Rate AdjustmentCapability

Proper seed rate lever positioning is conveniently indicated on the seed rate chart for easeof setting and adjustment with a high level of confidence.

Wind Guarded Seed Drop Protects seed from blowing away and ensures uniform seed distribution across the fullwidth of the seeder.

Seed Rate Chart Conveniently positioned as large durable decal under the seed box lid for handy calibrationreference.

#40 Roller Chain Drive Provides for smooth and quiet running with a high degree of reliability and a spring loadedidler keeps the chain properly tensioned.

High and Low Speed RangeSettings

A simple and easy repositioning of seed drive sprockets allows for an expanded range ofseed drive settings.

Crab Action Spiked FrontRollers

Two 8" diameter front rollers can easily be angled from 0-20 degrees providing for more orless aggressive de-thatching action or soil cultivation and seedbed preparation.

Spring Mounted Rear Rollers Full length rear rollers come in a choice of 8" diameter spiked steel or a cast steel andnotched packer type roller that are spring loaded for maximum down pressure and seed tosoil contact.

Ground Driven Metering The rear roller serves as the primary seed meter drive providing a very high degree ofaccuracy, low maintenance costs, and long component life.

Rear Spiked Roller Option

Rear Packer Roller Option

Opens ground surfaces covered with heavy vegetation and/or grasses to allow seed tomake contact with the soil. Allows planting over existing grass without killing the grass.

Presses seed into full contact with soil that has been worked into a seed bed.

Mud Scrapers Option Reduces build-up of mud and debris on rollers when working in wet, sticky or trashy soil.

Spring loaded chain idler Spring loaded idler keeps constant pressure on chain so seeding rate is consistent.


108313-354F1/27/09

Table of Contents
Food Plot Seeder

Seeders, Food Plot SeederFPS48 Plot Ranger

Features Benefits

Cultivating Width 40" to 50" disking width for food plot cultivation in areas with tighter and restrictedaccess.

Weight 510 lbs. Heavy construction helps achieve better soil penetration with disks.

Tubing and angle iron construction Provides a highly durable frame built that will perform and last for years.

Adjustable disc gang angle Front and rear gangs are adjustable to: 0,7,14, or 21 degrees to quickly provide thedesired seedbed finish.

Notched discs Four notched discs on each gang to provide more aggressive soil penetration.

Heavy duty disc hangers HD disc hanger frames resist high torque load from u-bolts.

Sealed bearings Two self-aligning sealed bearings per disc gang mounted in heavy duty 3/8" mountingplates for long life.

Heavy duty gang axles 1" square high carbon steel disc gang axles to handle shock loads and hard groundconditions.

Easy mount spin spreader Spin spreader runs on 12volt power source and installs or removes in seconds and canbe installed in other receiver hitches for maximum versatility.

Hopper capacity 2 cubic foot (15 gallon) hopper is capable of holding up to 100 lbs of seed, fertilizer,prilled lime, sand, or salt for good working coverage & versatility. A 42" hopper accessheight makes filling the hopper an easy job and a firm-fitting top keeps seed dry.

Spreading capability Using the exclusive land pride deflector ring restricts and keeps most of the seed orproduct inside of the machines cultivating width for good control. Removal of thedeflector ring enables spread widths up to 20 ft. for exceptionally high productivity.

Metering Electronic tethered hand control has six seed gate opening settings and adding thesmall seed restrictor plate inside of the hopper increases total possible seed gateopening to 12 settings for excellent seed selection range and dispersion control.

Seed rate chart Unit comes with an exclusive seed rate chart to provide basic guidelines and controlsetting for seed rate distribution to reduce potential of expensive product waste.

Roller Packer The rear mounted roller packer presses distributed seed into full contact with the soil forbetter germination. The roller packer flips forward into transport position without havingto remove the seed hopper. This also provides extra down pressure for disc penetration.

Manual or powered transport lift. Customers have a choice of manual lift or electronic actuator lift to bring the unit up ontotwo 13"diameter pneumatic 4 ply tires for easy transport. Tires can also be fluid filled toadd additional down pressure for discing.

Uni-hitch system The pull-type attaching system has a two-inch standard ball type hitch or can be rotated180 degrees for clevis hitch attachment.

Horsepower requirement A low 17 hp power requirement means you can pull this system behind a wide range ofvehicles that are equipped with a rear hitch.


109322-118F4/08/08

Table of Contents
Electric Spin Spreader

Seeders, Electric Spin SpreaderElectric Spin Spreader

Description BenefitsWater Tight Poly Hopper Protects seed and fertilizers from moisture and rodents. Poly construction provides for low

unit weight, quiet operation, and resists corrosion.

Small Seed Restrictor Plate Enables applications of smaller seeds without waste. Doubles the number of possibleapplication rates over similar competitive models.

Removable and AdjustableFlinger Ring

Keeps seed or applied products contained to actual width of soil cultivation for reducedwaste. Ring removal enables highly productive wide area broadcast of fertilizer, gypsum,lime, sand or salt.

Electronic Tether Control Enables easy and convenient control of on/off function and seed gate application rates rightfrom the seat of the traction unit.

Standard Application RateChart

Enables customers to determine spreader settings with confidence and ease. Similarcompetitive models don’t supply rate charts and require costly and wastefulexperimentation to determine proper calibration settings.

Versatile Mounting Systems Provides capabilities for mounting spreaders on a wide range of discs, tractors utilityvehicles, ATVs, and pickups.

12 Volt Operating System Enables attachment to a broad range of lower priced traction units equipped with 12 voltpower outlets.

Low Unit Weight Provides for easy one-person installation and removal


110701-162F3/20/08

Table of Contents
Overseeder

Seeders, OverseederOS15 Series

Features Benefits

2" or 3" Spacing Knife spacing for different geographic soil types, conditions and moisture.

Seed to soil contact Knives create a slit, the seed is precisely placed in the slit and the roller incorporates seedto soil contact (for better seed germination).

Easy seed cup and seed boxemptying

Flute is designed to allow easy clean out of material in seed box and seed flutes.

Seed box agitator Eliminates seed bridging.

Seed cups withpowder metal flutes

Superior metering accuracy by each flute. Powder metal dissipates heat to keep cupsrunning cool.

Gauge wheel or rear rollerseed cup drive

Gauge wheels keeps knives in ground more consistently in undulating terrain. Rear rollerdrive allows for closer seeding to obstructions.

Water tight seed box Keeps water out and seeds in.

Wind guarded seed drop Seed rate is consistent across width of the machine and is not hampered by windyconditions.

Straight Knives More aggressive, picks up thatch.

Curved Knives Less aggressive and less disturbance of thatch layer.

Small seeds box Simultaneously seeds second type of seed.

Slit seeder attachment Guides seed directly into slit. Good for overseeding expensive grasses to insure good seedto soil contact.

Front roller (Option) Used to set seeding depth with units equipped with rear roller drive. Precise depth control.


HP rating 25-60 HP

Offset hitch – 48" unit Offset by 10" to cover right tire track.


Aids in one person hook-up.

Machine weights 48" - 1260 lbs; 72" - 1605 lbs.

0"-1 1/2" Depth adjustment Adjust depth for different seed types, soil conditions and moisture.

High carbon heat-treatedknives

Last longer in sandy soils.

High tensile roller chain Provides a smooth and quiet drive.

1 Bushel per foot seedbox Fill less often with a large box.

Seed splash guard Seedbox lid has a guard to prevent seed from being spilled between lid and box.

Heavy-duty lid Lid won’t buckle or slam shut in high winds.

Lift hooks Allow for easy loading & unloading from trailers

Packer wheel scraper Prevents soil buildup on packer wheels in moist conditions.

Covered drive chains Drive chains are covered for safety, as well as keeping tree branches away to eliminatechain jumping.

Warranty 5 Years on gearbox. One year parts & labor.


111308-303F6/22/11

Table of Contents
Primary Seeder

Seeders, Primary SeederPS1572 Model

Features Benefits

Cat. 1 Hitch Fits Land Pride Quick-Hitch for easy one person hook-up to tractor.

70 1/2" Seeding width Perfect size for landscape market. Sized for smaller areas such as between the curb andsidewalk or the new community park.

Approximate machine weight 1,165 lbs. Heavy weight helps seed to soil contact.

Lift hooks Lift hooks on each side of the seedbox to attach chain or strap to for easy loading andunloading.

Heavy-duty lidswith stay open support

Lids are precision fit to keep seeds dry and rodents out and they won’t buckle or slam shutin high winds.


Water tight Seedbox All-welded seedbox construction. Keeps moisture out of the seedbox.

Easy seed box clean out Seed flute is designed for easy clean out. Simply move the flute lever into the clean outposition and all seeds will be removed.

Large seedbox capacity One bushel per foot. Keeps filling to a minimum and increases productivity.

Grass seed cups Grass seed model uses 10 proven fluted seed cups for accurate seed rates.

Seed box agitator Eliminates bridging of seed.

Powdered metal in flutedsprockets

Helps dissipate heat from the fluted area and plastic seed cup housing.

Wind guarded seed drop Protects the seed from being blown away by windy conditions. Ensures constantplacement of seed across the whole width of the machine.

Seed rate adjustment Easy adjustment of seed rates. Lever position is located on seed rate chart.

Seed rate decal Positioned on lid. Easy access to seed rate information.

High/Low seed settings Easy adjustment on sprocket arrangement on seed cup drive. This allows for a very broadrange of seed settings.

Ground driven metering Front packer rollers are in constant contact with the ground to ensure consistent meteringof seed. Seed metering stops automatically when front packer is raised off the ground.

Cast iron front packer rollers 12" diameter front rings and 9 1/2" diameter rear rings are used to crush the clods andpack the seed in to promote seed to soil contact.

Spring mountedrear packer rollers

Rear packer rollers are spring loaded for additional down pressure, and to stay in contactwith the ground.

Tire track removers Coil spring tine track removers keep their shape; one on 48" model, two on 72" modelallows tractor tire(s) to be scratched out. Additional track removers can be added.

#40 Roller chain All drives utilize #40 roller chain for smooth running.

Spring loaded chain idler Spring loaded idler keeps constant pressure on chain so seeding rate is consistent.


112313-164F6/22/11

Table of Contents


Seeders, Primary SeederPSN2096 Model

Features BenefitsCat. 2 & 3, Cat. 2 Quick-Hitchadaptable

Cat. 2 & 3 offers a wide variety of tractors, Cat. 2 Quick-Hitch allows for easy connectingand disconnecting.

Seeding width 8' - 6" Seeding width is just right for small acreage, roadside native grass work, and smallturf farms.

Lift hooks Lift hooks on each side of the seedbox to attach chain or strap to for easy loading andunloading.

Native Grass model Native Grass model allows the user who works primarily with native grasses to use the mainbox for native grass seed.

Heavy-duty lidswith stay open support

Lids are precision fit to keep seeds dry and rodents out and they won’t buckle or slam shutin high winds.

Seed splash guard Seedbox lid has a welded in guard to prevent seed from being spilled between lid and box.

Water tight Seedbox All-welded seedbox construction prevents twisting from uneven ground, offers years ofservice. Keeps moisture out of the seedbox.

Large capacitynative grass seedbox

1 Bushel per foot (8 1/2 bushel) capacity keeps filling to a minimum, Increases productivity.

Native grass seed cup Large aluminum seed cup with aggressive picker wheel is used on Native Grass main box.

Native grass agitator Native Grass main box uses an aggressive paddle style agitator to keep the fluffy nativegrass from bridging.

4-Speed transmission forNative Grass Seedbox

Easy and fast speed change, saves time from removing chains.

Seed rate adjustment leverfor Standard Seeds Boxand Small Seeds Box

Easy adjustment of seed rates. Lever positions are located on seed rate charts.

Seed rate decal Positioned on lid of each box. Easy access to seed rate information.


Ground driven metering Front packer rollers are in constant contact with the ground to ensure consistent metering ofseed. Seed metering stops automatically when front packer is raised off the ground.

Cast iron front packer rollers 12" diameter front rings and 9" diameter rear rings are used to crush the clods and pack theseed in to promote seed to soil contact.

Spring mountedrear packer rollers

Rear packer rollers are spring loaded for additional down pressure, and to stay in contactwith the ground.

Adjustable track removers Spring tine track removers effectively scratch out the tracks from the tractor tires.


Optional Features (PSN2096 Primary Seeder)

Features Benefits

Standard Seeds Box A 0.6 bushel per foot standard seed box can be bolted to the front of the main box forseeding turf grass seeds.• Seed cups are powder metal flutes for accurate seed rates.• Seed agitator is paddle style to keep seeds from bridging.

Small Seeds Box A bolt-on Small Seeds Box can be added to the rear of the main box to mix small seeds inwith other types, allowing them to be seeded at rates that compliment each other.

Pull Type Hitch Allows for easier hook-up to tractor, adaptable to smaller tractors.


113313-306F6/22/11


Table of Contents

Seeders, Primary SeederPS25120 Model

Features Benefits

Cat. II 3-PointQuick hitch adaptable

Fits on larger tractors to handle the weight, or Pull-type for smaller tractors.Quick hitch allows for easy connecting and disconnecting.

Approximate machine weight 2,940 lbs. Heavy weight helps seed to soil contact.

Pull-TypeFront mounted wheels

End mounted wheelsTransport locks

Removable tongue

Front mounted wheels narrow the unit up for transport or going through gates.End mounted wheels gives a smoother transport, and lowers the negative tongue weight.Keeps wheels in transport position if cylinders were to fail during transport.Tongue is easy to remove. Convenient for storage or when loaded on a trailer.

Lift hooks For easy loading on to trailers

Heavy-duty lock-up lid Lids are precision fit to keep seeds dry and rodents out and they won’t buckle or slam shutin high winds.


All welded weatherproofseedbox

Keeps rain and rodents out, and gives rigidity to seedbox.

Easy seed box clean out Seed flute is designed for easy clean out. Simply move the flute lever into the clean outposition and all seeds will be removed.

30 Bushel seed capacity 30 Bushel is ideal for the sod farmer and grain growers.

Seed level indicator Check seedbox level from the tractor seat.

Fluted sprocket seed cups The right amount of seed is picked up by the fluted sprockets every time.

Powder metalin the fluted sprocket

Powder metal in the seed cup sprockets helps dissipate heat caused by the frictionbetween the sprocket and housing.

Seed rate adjustment Easy adjustment of seed rates. Lever position is located on seed rate chart.

Adjustable seed opening Seed opening can be ‘enlarged’ by sliding a lever. Larger opening for fluffy seed allows foreasier flow.

Seed rate decal Positioned on lid. Easy access to seed rate information.


Ground driven metering Front packer rollers are in constant contact with the ground to ensure consistent meteringof seed. Seed metering stops automatically when front packer is raised off the ground.

Cast iron packer rollers 15 5/8" diameter front rings and 11 3/8" diameter rear rings are used to crush the clodsand pack the seed in to promote seed to soil contact.

Spring mounted rear packers Rear packer rollers are spring loaded for additional down pressure, and to stay in contactwith the ground.


Vacuum sealed acremeter Vacuum sealed to keep dirt out. Acremeter to plan seed requirements.


114313-156F3/29/10

Table of Contents
Spreaders

Seeders, SpreadersFSP500, FSP700 & FSP1000 Models

Features Benefits

Hopper capacity FSP500-350 lbs.; FSP700-563 lbs.; FSP1000-673 lbs. to meet specific customer needs.

Spreading capacity Highly productive at 44 to 890 lbs. per acre.

Spin-type broadcast For even spreading and productive coverage up to 54 ft.

One piece moldedpolyethylene hopper

Plastic construction to eliminate corrosion.Seamless for accurate and consistent emptying.

Heavy-duty tubular frame Supports the weight when full.

Tow hook Handles up to 1200 pounds.

540 RPM shielded PTO For added safety.

Shielded Front Prevents spreading of material in front of the spreader.

Stainless steeldistributor vanes

Protects from corrosive material to enhance longevity.

Adjustable distributor vanes Four adjustable positions to obtain maximum spreading precision and uniformity.

Plastic agitator wheelwith steel arm

Standard equipment and is useful when spreading powder type materials that tend tobridge.

Stainless steel orifice doors Protects from corrosive material enabling doors to operate smoothly.

Plated adjustment levers Protects from corrosive material to enhance longevity.

Cat. 1 3-point hitch For attachment to a wide range of tractors.


115309-065F11/08/10


Table of Contents

Seeders, SpreadersPFS4000, PFS5060 & PFS8010 Models

Features Benefits

High hopper capacities Able to cover large areas between hopper refills.

Low profile hoppers Low filling height. Easy to fill.

Drive unit is without gears orhydraulic motors

Provides simple maintenance.

One piece hopper molded offiberglass or polyethylene


Parts in direct contact with productare constructed of non corrosivematerials

Helps eliminate corrosion of parts.

Spreading capacity Highly productive at 44 to 890 lbs. per acre.

Pendulum type broadcast Provides even spreading and controlled coverage up to 50 ft. effective spreadingwidth.Pendulum system insures that the material is always spread the same on left andright side.

Two position pendulum angle Allows to increase or decrease spreading width.

Heavy-duty tubular frame Supports hopper weight with optional extensions when full.

Tow hitch Good for pulling a trailer loaded with product to fill the spreader or pulling a dragharrow. (Not available with PFS8010 model.)

540 RPM shielded PTO For added safety.

Standard Plasticpendulum spout

Protects from corrosive material to enhance longevity.Optional spouts are constructed of stainless steel to enhance longevity.

Variable adjustable gate Provides for precision control of discharge rate.

Stainless steel gate Protects from corrosive material enabling gate to operate smoothly.


PFS4000 with Cat. I 3-point hitchPFS5060 with Cat. I & II 3-point hitchPFS8010 with Cat. II 3-point hitch

For attachment to a wide range of tractors.

Optional Agitator Kit Helps keep light fluffy material from bridging.(Not available on the PFS4000 model.)

Optional Hydraulic Gate Kit Allows the operator to open and close the discharge gate hydraulically on the go.(Not available on the PFS4000 model.)

Optional Hopper Extensions Kit Increases hopper capacity. (Not available on the PFS4000 model.)


116309-124F4/30/12

Table of Contents


Seeders, SpreadersPTS500 & PTS700 Models

Features Benefits

Large hopper capacity To meet specific customer needs.

Spin-type broadcast For even spreading and productive coverage up to 40 ft.

One piece moldedpolyethylene hopper


Heavy-duty tubular frame Supports the weight when full.

Pull type hitch For attachment to a wide range of tractors and vehicles.

Adjustable tongue Keeps hopper level at varying hitch heights.

Tow hitch Handles up to 800 pounds towing capacity. (50 pounds maximum tongue weight.)

Greasable Axle Helps with longevity of axle.

Shielded Front Prevents spreading of material in front of spreader.

Stainless steeldistributor vanes

Protects from corrosive material to enhance longevity.

Adjustable distributor vanes Four adjustable positions to obtain maximum spreading precision and uniformity.

Stainless steel orifice doors Protects from corrosive material enabling doors to operate smoothly.



117309-125F3/20/14

Table of Contents
Snow Blowers

Snow BlowersSB10, SB15, & SB25 Series

Features Benefits

Quality Comer Gearbox Provides long life, durability construction.

Large main housing Ability to handle large drifts.

Large impeller diameter The ability to move and throw material farther.

Options

Bolt-on hardened steel,cutting edge

Improves service life of the Snow Blower.

Sprocket driven chute rotator Allows choice of three rotator options: manual drive, electric actuator, or hydraulic motor.

Shearbolt protectedimpeller and auger

Eliminates costly repairs.

Greaseable bearings Less drag and extends life of unit.

Three skid shoe options Multiple surfaces allows you to pick the correct skid shoe for your application.


118370-027F8/26/11

Table of Contents


Snow BlowersSBD3596 & SBD35108 Models

Features Benefits

Quality Comer gearbox Provides long life, durability construction.

Two position hitch Helps reduce driveline angularity issues when raising the 3 Point arms up.Allows lower 3 pt. arms to be positioned more parallel to the ground when in operation.

Large main housing with dualaugers

Dual augers are capable of making 40" high cuts through large snow drifts.

Large impeller diameter Has the ability to move and throw large amounts of material farther.

Hard steel bolt-on reversiblegrader blade

Bolt-on blade can be replaced before auger housing becomes exposed to wear. Hardenedsteel blades last longer and because the blade is reversible, it can be flipped over todouble the blade’s life.

Hydraulically driven chuterotator

Gives the operator the ability to change direction snow is being blown with the hydrauliccontrol lever.

Shearbolt protected gearbox,drive shaft, impeller, andauger

Eliminates costly repairs.

Greaseable bearings Less drag and extends life of unit.

Replaceable and adjustableskid shoes

Bolt-on skid shoes can be replaced before auger side plates become exposed to wear.They can be adjusted to carry the Snow Blower above loose gravel and crushed rock orset to remove snow close to surfaces such as asphalt and concrete.

Options

Hydraulically controlled chutetilt

Gives the operator the ability to change the distance snow is being blown from thedischarge chute with the hydraulic control lever.


119370-347F3/03/14

Table of Contents
Soil Pulverizers

Soil PulverizersSP20 & SP30 Series

Features Benefits

Working widths 20 Series: 60", 72"; 30 Series: 72", 84"

HP Range 20 Series: 20-35 HP; 30 Series: 30-50 HP

Replaceable heat-treatedsleeves

Heat-treated replaceable sleeves on roller protect spike. Easily replace the sleeve whenworn vs. replacing entire spike.

3/8" Steel spikes weldedto the roller’s surface

Spikes are welded to the roller’s surface rather than to a hole. Damaged spikes can be cut offand replaced.

Self-aligning bearings withdouble lip seals on rear roller

Self-aligning bearings conform to the roller and shafts.

1" Diameter shaft in roller Heavy shaft can handle the shock loads from the roller.

Roller has high numberof steel spikes

Better pulverization, more spikes than most competitors

H Beam 20 Series: H Beam-10"; 30 Series: H Beam-12"

10 1/2" x 2" x 2" Scarifier teeth Scarifier teeth are heat-treated for long life and can be reversed when one side wears down.

Warranty One year parts and labor

Fits Land Pride Quick-Hitch Cat. 1 3-point fits Land Pride Quick-Hitch for easy on-off with one person.


120307-099F3/20/08

Table of Contents
Spike Tooth Harrows

Spike Tooth HarrowsSTH1590 Model

Features Benefits

Chain suspension at the rear Permits harrow to follow the terrain for even tooth penetration.

Heavy constructed tooth bars Designed to handled the job.

10 Adjustable tooth angles Has a wide range of teeth angles available from the least aggressive tooth angle forgiving the best flow-through of residue to the most aggressive angle for fluffing-up theground such as an arena floor and 8 position in between to best fit the job at hand.

A Tooth on the ground every 1 3/4" Provides maximum conditioning of the soil, breaking and spreading of manure andresidue, and for even leveling and firming of the soil.

Diamond shaped teeth Helps to break-up material into finer pieces for a more even spreading of material acrossthe ground. Great for seed bed preparation, preparing arena floors, and breaking upclumps of manure blocking sunlight and spreading it over the ground to act as a fertilizer.

Narrow tooth point Cuts through grasses instead of pulling out desirable grasses and plants.

Forged hardened tooth tips Forged hardened tooth tips extends the life of the teeth.

Softer metal at threaded end ofteeth

Helps resist breakage when striking rocks or other obstacles. Threaded end allows thetooth to be removed for repair or replacement.


121322-314F8/31/11


Table of Contents

Spike Tooth HarrowsSTH2024 Model

Features Benefits

Chain suspension Permits harrow to follow the terrain for even tooth penetration.

Heavy constructed tooth bars Designed to handled the job.

2 Tooth angles(40o & 22o off vertical)

The least aggressive tooth angle (40o) gives the best flow-through of residue.The most aggressive tooth angle (22o) is for fluffing-up the ground such as an arena.

10 Teeth on the ground every foot Provides maximum conditioning of the soil, breaking and spreading of manure andresidue, and for even leveling and firming of the soil.

Diamond shaped teeth Helps to break-up material into finer pieces for a more even spreading of material acrossthe ground. Great for seed bed preparation, preparing arena floors, and breaking upclumps of manure blocking sunlight and spreading it over the ground to act as a fertilizer.

Narrow tooth point Cuts through grasses instead of pulling out desirable grasses and plants.

Forged hardened tooth tips Forged hardened tooth tips extends the life of the teeth.

Softer metal at threaded end ofteeth

Helps resist breakage when striking rocks or other obstacles. Threaded end allows thetooth to be removed for repair or replacement.


122322-315F7/18/11

Table of Contents
Straw Crimpers

Straw CrimpersCR25 Series

Features Benefits

Cat. 1 Hitch Fits Land Pride Quick Hitch, and stout enough to work with any Cat. 1 tractor.

72" width Mostly used in wide open spaces, 72" covers a nice width.

Plate steel ‘A’ frame Plate steel offers greater strength from natural force applied downward from tractor toplink.

Tubular Construction 2 1/2" x 2 1/2" x 3/16" Tubing vs. angle iron offers greater strength as well as gives a betterappearance.

Expanded metal in weight tray Adds safety over blade area, doesn’t allow foreign weight object to fall into blade area.

Blades Blades are blunted just right to crimp the straw and not cut it, as well as disturbing the soilvery little.

Blade attachment Blades are independent of each other allowing for less side load torque on each bladeduring turns.

Blade hub greasing Each blade hub has a grease zerk for smooth rotation.

Storage stands Each corner has a storage stand to aid in off the ground storing, as well as aiding inhooking to the tractor.

Blade spacing Blades are spaced 6" apart to offer optimum crimping.

Optional Water Tanks Easily add up to 600 lbs. to aid in compacted soil conditions. Can easily reduce weight bydraining tank incrementally. Water tanks are safer due to precise fit and fastening vs.stacking inconsistent sized objects and difficulty in uniform fastening.


123325-037F4/08/08

Table of Contents
Stump Grinders,Skid Steer

Stump Grinders, Skid SteerSSG2524 Model

Features Benefits

Universal quick attach mountingsystem

For quick and easy attachment.

8" Digging depth A good depth below the ground. Removes base of most trees.

Adjustable skid shoes Adjustable to fit all sizes of skid steers.

Pivoting discharge deflector Discharge deflector pivots up while cutting wheel is digging into the ground.

Welded on serrated step Good safe step for accessing skid steer operator’s seat.

High speed cutting wheel Cuts faster with less vibration.

Permanent hose holders Hoses aren’t zip-tied to the frame. Zip ties can break over time.

Replaceable carbide cutting teeth Cutting teeth are easy to replace. Carbide tips for extra long life.

Hydraulic hose lines Hydraulic hoses absorb shock. Steel hydraulic lines crack from vibration.

Case drain hydraulic line Protects against component damage.

Keyed, tapered spindle on end ofhydraulic motor

Able to draw cutting wheel tight against the tapered shaft providing an excellentfit-up and less likely to shear the key off.

Cutting wheel designed withwheel puller access holes

Makes it easier to pull the cutting wheel off of the motor spindle.

Attached rain tight manual holdingtube

Keeps manual with stump grinder for quick easy access. Manual won’t get wet.

Offset articulating arm Allow for optimum line-of-site from operator’s seat.


124328-215F2/24/14

Table of Contents
Wood Chippers

Wood ChippersWC1503

Features Benefits

Quick-Hitch Adaptable Quickly and easily attach deck to tractor with one person.

1/4" Thick Cutting Knife Rotor features 2 replaceable 1/4" hardened steel cutting edges.

Knives Can Be Rotated WhenOne Cutting Edge Is Worn

Each knife has two cutting edges to extend knife life. When one edge is worn, rotate knife180o to a new cutting edge. Less downtime required to sharpen knives.

Knives Are Replaceable. Can replace knives when all cutting edges are worn out.

Two V-Belts Designed to handle shock loads.

Spring Loaded Adjustable Idler Allows for constant and proper tension on belt.

2-Bolt Flanged Bearings Improves bearing life.

Cat. ll Shear-Bolt Driveline Shear-bolt protects the unit when obstructions are encountered.

Skid Extension Supports Allows the unit to sit on the ground while keeping the driveline near level. Extends life ofdriveline u-joints.

Adjustable Rotating DischargeChute With Rotation Stops

Directs direction wood chips will be discharged. Chute rotate stops keep the chute fromdischarging chips toward the operator feeding product into the feed chute.

Adjustable Deflector Chute Helps control the distance wood chips will be discharged away from the Wood Chipper.

9,090 FPM Knife Speed For cleaner cut and better discharge of wood chips.

Self-Feeding System Product is pulled in by the sharp cutting knives with each pass of a knife. Operator can beretrieving the next object to load while the unit is chipping the last limb loaded into the feedchute.


125328-085F3/05/13


Table of Contents

Wood ChippersWC1504

Features Benefits

Quick-Hitch Adaptable Quickly and easily attach deck to tractor with one person.

1/4" Thick Rotor Knife Rotor features 4 replaceable 1/4" hardened steel cutting edges.

Rotor Knives Can Be RotatedWhen One Cutting Edge IsWorn

Each rotor knife has two cutting edges to extend rotor knife life. When one edge is worn,rotate rotor knife 180o to a new cutting edge. Less downtime required to sharpen rotorknives.

Rotor Knives Are Replaceable Can replace rotor knives when all cutting edges are worn out.

4-Bolt Flanged Bearings Improves bearing life.

Cat. 4 Shear-Bolt Driveline Shear-bolt protects the unit when obstructions are encountered.

Skid Extension Supports Allows the unit to sit on the ground while keeping the driveline near level. Extends life ofdriveline u-joints.

Adjustable Rotating DischargeChute With Rotation Stops

Directs direction wood chips will be discharged. Chute rotate stops keep the chute fromdischarging chips toward the operator feeding product toward the feed chute.

Adjustable Deflector Chute Helps control the distance wood chips will be discharged away from the Wood Chipper.

Self-Feeding System Product is pulled in by the sharp cutting edges with each pass of a rotor knife. Operator canbe retrieving the next object to load while the unit is chipping the last limb loaded into thefeed chute.


126328-098F10/01/13

Table of Contents
Zero Turn Mowers

Zero Turn MowersZ48, Z54, ZSR54 & ZSR60 Models

Features Benefits48", 54" & 60" Cutting widths Sized right and priced right for residential owners.

1 1/2" to 4 1/2" Cutting height Provides a good range of cutting heights in 1/4’ increments for any type of turf grass.

Narrow drive tire stance Provides good maneuverability. Allows for tight turns, yet gives a very stable platform overuneven ground.

High ground speedZ Models

ZSR Models

Can mow a lot of grass in a short time.6.5 mph forward and 4.5 mph reverse7.2 mph forward and 4.5 mph reverse

Adjustable steering levers withcomfort grip handles

Wide range of adjustments to accommodate almost any size of operator.Grips are designed for operator comfort and sustained productivity.

Stronger clean frame design Integral frame and hydraulic reservoir construction reduces component clutter under the seatfor easy cleanout and service access.

Single welded 10 gauge deckframe with reinforced edges

Makes a stronger deck and reduces unwanted flex.

Rapid deck height adjustment The foot operated with spring assist deck lift and deck stop locator makes for a quick andeasy precise cutting height adjustments.

Easy clean-out deck top Deck allows air and debris move across the top for improved belt cooling and easy clean out.

Mid-mount deck design Puts deck closer to operator’s line of sight for more efficient and precise operation.

Floating deck design Chain suspension design provides excellent flotation over uneven terrain.

Four anti-scalp rollers Two located on deck ends and two located toward mid-decks keeps scalping to a minimum.

Hydro-Gear Zero-Turn Transaxledrive unit on each rear wheel

Each rear wheel has an integrated hydrostatic transaxle containing a pump with fan for coolingand drive motor. These units are self contained and maintenance free except for changinghydraulic filters.

ZT-3100TM Transaxles in the ZSRModels incorporate steel cutgears

Steel cut gears out perform powder metal gears in an abusive environment making steel cutgears cost affordable for high end users.

Wide rear turf tread tires Offers excellent ground flotation and gentle on turf grasses.(Z Models: 4-bolt, 18 x 8.5 - 8 tires & ZSR Models: 5-bolt, 20 x 10 -10 tires)

Front ribbed tires mounted inheavy duty pivoting caster forks

Provide for a quick and durable turning response.(Z Models: 11 x 4-5 & ZSR Models: 13 x 5 -6)

(ZSR Models only)Lockable floating front axle

Floating front axle provides for smoother ride, more uniform cut, and optimal tractioncapability by keeping all tires equally in contact with the ground over uneven terrain. Axle lockprovides for temporary curb or edge cutting without grounding or hanging up the deck.

Electric clutch control Provides an easy smooth engagement of the mower blade drive system.

Single Kevlar drive belts Drive belts made with KevlarTM fiber provide long belt life. One hydrostatic pump drive beltand one deck drive belt is easier to maintain and not as expensive as multiple belt designs.

1 3/8" blade spindles mountedin ductile iron housings

Blade spindles and spindle housings are designed to handle heavy shock loads.

Accessible blade spindle zerks Makes greasing the blade spindles easy.

Heavy duty heat treated Fusion®

high lift bladesMade from highest quality .25" thick fusion treated steel for high wear and increase blade life.High lift design stands grass up before cutting.

High blade tip speed Provides a clean quality cut. (18,300 fpm and higher)

Electric start with choke control Keyed ignition and manual choke control are placed for one-handed starting convenience.

Engine oriented for easy access Oil dipstick, oil drain ports, air filter, oil filter, spark plugs, choke, and throttle can be servicedfrom the rear verses the side.

Center mounted rear engine Provides maximum mower stability, easy service access, increased leg room, and increasedair flow around engine fins to extend engine life.



Zero Turn Mowers


Table of Contents

Engine air filtration The smaller Kawasaki engines are provided with an internal proven 2-stage quick accessfilter cartridge. The larger Kawasaki engine is provided with a remote air intake that filters out95 percent of airborne particles.

Isolated exhaust muffler Muffler is hidden and tucked down under to reduce noise and provide protection againstburns.

Ergonomically designedcontrol console

Instrumentation and console controls are positioned for easy visual and fingertip access.

Hour meter Measure actual engine run time to monitor service intervals.

Sleek styling twin six gallon fueltanks with extra large fuel caps

12 Gallon fuel capacity for plenty of operating range and decreased downtime.Extra large fuel openings for easy fueling. Fuel caps are placed inboard and center mountedto protect caps from damage and prevent overflow spills on inclines.

Fuel selector/shutoff valve Provides on the go switching from one tank to another giving the operator time to finish themowing job and to return to the refueling source before the mower stops running. Both tankscan be shutoff with this valve for servicing and storage.

Molded-in dual cup holders andstorage compartments

Tanks are molded with cup holders that fit a wide variety of cups and are in easy access to thedriver. A storage compartment molded next to the cups offer additional operator convenience.

Lever activated park brake A manually activated over-center park brake lever located next to the operator’s left side foreasy activation and release of a spring applied pawl over cog brake in the transaxle.Mower will not move until brake is released.

Hinged seat platform Provides easy service access to the compartment below the seat and is spring mounted for asmoother ride. Requires removal of only one bolt for quick access to components below.

Comfortable adjustable seat Deluxe Cushion suspension with molded high back, adjustable arm rests, and adjustableseat positioning for operator comfort and sustained productivity.

Seat safety interlocks Rising off of the seat with blades engaged will cut engine power and stop blade rotation.Engine cannot be started with blade engagement switch in “on” position.

Bolted on floor platform Provides service access to topside deck components.Requires removal of only 2 bolts for quick access.

Certified ROPS Certified ROPS for added operator protection.

Electric deck lift option Makes lifting and lowering the deck easier.Sun canopy accessory Makes mowing more comfortable on hot sunny days. Helps protects against harmful sun

rays. Designed to fit the folding ROPS.

EPA Compliant MowersEPA approved six gallon fueltanks with sight gauge, extralarge tethered fuel caps andvent valve

12 Gallon fuel capacity for plenty of operating range and decreased downtime.Extra large fuel openings for easy fueling. Fuel caps are EPA approved, non vented, placedinboard, and center mounted to protect caps from damage and prevent overflow spills oninclines. EPA vent valve help stops fuel leaks in rollover accidents and sight gauge makes iteasy to see low fuel level in tanks.

Fuel tanks are vented to theengine carburetor

Engine burns fuel vapors instead of vapors leaking into the atmosphere.

Z48, Z54, ZSR54 & ZSR60 Models

Features Benefits


128357-344F end2/17/14

Table of Contents


Zero Turn MowersZST40 & ZST48 Models

Features Benefits40" & 48" Cutting widths Sized right and priced right for residential owners.1" to 4 1/2" Cutting height Provides a good range of cutting heights in 1/2" increments for any type of turf grass.Narrow drive tire stance Provides good maneuverability. Allows for tight turns, yet gives a very stable platform over

uneven ground.High ground speed Can mow a lot of grass in a short time. 6 MPH forward and 4 MPH reverseAdjustable steering levers withcomfort grip handles


Frame design Square tubing welded for increased durability.Single welded 11 gauge deckwith reinforced leading edge

Makes a stronger deck and reduces unwanted flex.

Rapid deck height adjustment The foot operated deck lift and deck stop pin locator makes for a quick and easy precisecutting height adjustments.

Easy clean-out deck top Deck allows air & debris to move across its top for improved belt cooling and easy clean out.Mid-mount deck design Puts deck closer to operator’s line of sight for more efficient and precise operation.Floating deck design Provides good flotation over uneven terrain.Anti-scalp roller(s) Keeps scalping to a minimum.Hydro-Gear Zero-Turn Transaxledrive unit on each rear wheel

Each rear wheel has an integrated hydrostatic transaxle containing a pump with fan for coolingand drive motor. These units are self contained and maintenance free.

4-Bolt, 18 x 7.5 - 8rear turf tread tires

Offers excellent ground flotation and gentle on turf grasses.

11 x 4-5 front ribbed tiresmounted in heavy duty pivotingcaster forks

Provide for a quick and durable turning response.


Single Kevlar drive belts Drive belts made with KevlarTM fiber provide long belt life. One hydrostatic pump drive beltand one deck drive belt is easier to maintain and not as expensive as multiple belt designs.

1 3/8" blade spindles mounted inductile iron housings

Blade spindles and spindle housings are designed to handle heavy shock loads.

Accessible blade spindle zerks Makes greasing the blade spindles easy.Heavy duty heat treated Fusion®

medium lift bladesMade from highest quality 1/4" thick fusion treated steel for high wear and increase blade life.

High blade tip speed Provides a clean quality cut. (18,300 fpm and higher)Electric start with choke control Keyed ignition and manual choke control are placed for one-handed starting convenience.Engine oriented for easy access Oil dipstick, oil drain ports, air filter, oil filter, spark plugs, choke, and throttle can be serviced

from the rear verses the side.Center mounted rear engine Provides maximum mower stability, easy service access, increased leg room, and increased

air flow around engine fins to extend engine life.Internal air filter cartridge Easy to access.Isolated exhaust muffler Muffler is hidden and tucked down under to reduce noise and provide protection against burns.Ergonomically designedcontrol console

Instrumentation and console controls are positioned for easy visual and fingertip access.

Hour meter Measure actual engine run time to monitor service intervals.Sleek styling three gallon fueltank with an extra large fuel cap.

3 Gallon fuel capacity for plenty of operating range and decreased downtime.Extra large fuel openings for easy fueling. Fuel caps are center mounted to protect caps fromdamage and prevent overflow spills on inclines.

Molded-in cup holder Tank is molded with a cup holder that fits a wide variety of cups and is in easy access to thedriver.



Zero Turn Mowers


Table of Contents

Lever activated park brake A manually activated over-center park brake lever located next to the operator’s left side foreasy activation and release of a spring applied pawl over cog brake in the transaxle.Mower will not move until brake is released.

Hinged seat platform Provides easy service access to the compartment below the seat and is spring mounted for asmoother ride. Requires removal of only one bolt for quick access to components below.


Bolted on floor platform Provides service access to topside deck components.Requires removal of only 4 bolts for quick access.

EPA Compliant MowersEPA approved 3 gallon fuel tankwith sight gauge, vent valve andextra large tethered fuel cap.

3 Gallon fuel capacity for plenty of operating range and decreased downtime.Extra large fuel openings for easy fueling. EPA vent valve helps stop fuel leaks in rolloveraccidents and sight gauge makes it easy to see low fuel level in tanks. Fuel cap is EPAapproved, non vented, placed inboard, and center mounted to protect the cap from damageand prevent overflow spills on inclines.



ZST40 & ZST48 Models

Features Benefits


130357-505F end2/17/14

Table of Contents


Zero Turn Mowers


ZT360 & ZT372 Models

Features BenefitsCutting width of 60" or 72" Sized right and priced right for ranch, estate owners, and commercial operators.

Cutting height of 1" to 5" Provides a good range of cutting heights in 1/4" increments for any type of turf grass.

ZT360 = 52" & ZT372 = 56"Outside drive tire stance

Provides excellent stability over uneven and hilly ground along with good maneuverability.ZT360 is also available, as an option, with 56" outside drive tire stance.

High ground speed Forward 12 mph and reverse 6 mph for high productivity.

Adjustable steering levers withcomfort grip handles


Spring suspension seat platform Helps smooth out the ride.

Strong deck design New manufactured deck design has a great appearance on the outside, but tough parts onthe inside. 3/16" Deck with 1/4" doubler plate, and a reinforced front edge.

Rapid deck height adjustment The foot operated with spring assist deck lift and deck stop locator make for quick and easyprecise cutting height adjustments.

Easy clean-out deck top Deck allows air & debris to move across the top for improved belt cooling & easy clean out.

Snap-on deck belt guards Deck belt guards can be hand removed easily without tools.

Excellent trim capability Provides for good trim capability.

Mid-mount deck design Puts deck closer to the operator’s line of sight for more efficient and precise operation.

Floating deck design Chain suspension design provides excellent flotation over uneven terrain.

Four anti-scalp rollers Two located on deck ends and two located toward mid-deck keeps scalping to a minimum.

Completely independenttwin hydrostatic drives

Separate expansion tanks eliminate the possibility of cross contamination.

Premium wide stance drive tires Provide excellent traction, outstanding side-hill stability and a smooth ride.

Ribbed front tires mounted inheavy duty pivoting caster forks

Provide for a quick and reliable turning response.

Tele-Caster® wheel spindles Spring loaded caster wheel spindles for superior shock absorption over rough terrain.

Lockable floating front axle Floating front axle provides for smoother ride and optimal traction capability by keeping alltires equally in contact with the ground over uneven terrain. Locking front axle provides for amore uniform cut and curb or edge cutting without grounding or hanging up the deck.


Kevlar drive belts Drive belts made with KevlarTM fiber provide long belt life. One hydrostatic pump drive beltand one deck drive belt.

1" blade spindles mounted inductile iron housings

Additional 3/16" plate steel is added to the deck connecting the blade spindle housingmounts.Blade spindles, spindle housings and mounts are designed to handle heavy shock loads.

Accessible blade spindle zerks Makes greasing the blade spindles easy.

Heavy duty heat treated Fusion®

high lift bladesMade from highest quality .25” thick fusion treated steel for high wear and increase blade life.High lift design stands grass up before cutting.

High blade tip speed Provides a clean quality cut. See specifications for actual speeds.

Battery located under the seat Easy access to battery for servicing and maintaining.

Kawasaki engine Proven engine to meet customer preferences with power and performance to spare.

Electric start with choke control Keyed ignition and manual choke control are placed for one-handed starting convenience.

Engine oriented for easy access Spark plugs, air filter, oil filter, & oil drain are placed easily within reach.

Center Mounted Rear Engine Provides maximum mower stability, easy service access, increased leg room, and increasedair flow around engine fins to extend engine life.

Remote Air Intake All engines come standard with cyclonic type remote air intake to keep engines running cleanand running longer.

Engine oil cooler Keeps engine running at peak performance in warm weather conditions.


Zero Turn Mowers


Table of Contents

Isolated exhaust muffler Muffler is hidden and tucked down under to reduce noise and provide protection againstburns.

Ergonomically designedcontrol console

Instrumentation and console controls are positioned for easy visual or fingertip access.

Hour meter Measure actual engine run time to monitor service intervals.

Sleek styling EPA approved twinsix gallon fuel tanks with sightgauge, extra large tethered fuelcaps and vent valve

12 Gallon fuel capacity for plenty of operating range and decreased downtime.Extra large fuel openings for easy fueling. Fuel caps are EPA approved, non vented, placedinboard and center mounted to protect caps from damage and prevent overflow spills oninclines. EPA vent valve helps stop fuel leaks in rollover accidents and sight gauge makes iteasy to see low fuel level in tanks.



Fuel selector/shutoff valve Provides on-the-go switching from one tank to another giving the operator time to finish themowing job and to return to the refueling source before the mower stops running. Both tankscan be shutoff with this valve for servicing and storage.

Molded-in dual cup holders andstorage compartments

Tanks are molded with cup holders that fit a wide variety of cups and are in easy access tothe driver. A storage compartment molded next to the cups offer additional operatorconvenience.

Lever activated park brake A manually activated over-center park brake lever located next to the operator’s left side foreasy activation and release of internal wet disk brakes. Mower will not move until brake isreleased.

Hinged seat platform Tilts up for easy access to battery and drive components.

Comfortable adjustable seat Deluxe Cushion or Molded Vinyl with suspension and adjustable positioning for operatorcomfort and sustained productivity.


Hinged floor pan Provides quick and convenient service access to topside deck components without tools.

Certified ROPS Certified ROPS for added operator protection.

ZT360 & ZT372 Models

Features Benefits


132357-610F end2/11/14

Corporate Office: P.O. Box 5060Salina, Kansas 67402-5060 USA

www.landpride.com

table of contents - land pride · 2014-03-20 · aerators, core table of contents features and...

Documents