table of contents - scientific.net...alloy plate l. chen, y.x. hu, g. fang, z.q. yao and x.w. zheng...
TRANSCRIPT
Table of Contents
Preface, Committees and Sponsors
Chapter 1: Materials Engineering, Processing of Materials andChemical Technologies
Effect of Tempering Temperature on Mechanical Properties of 40CrMnSiB SteelH. Yang, S.Q. Yuan, F.T. Liu, J. Chen, C.H. Zhou, F. Wang and Z.X. Shen 3
Cooling-Performance Estimation of the Composite-Graphite Heat Sink with AnnularConductive Base for LED LampF. Li, T.M. Jeng, S.C. Tzeng and P.T. Cheng 9
Preparation and Characterization of SrAl2O4: Eu2+, Dy3+ Luminescent NanofibersJ.L. Liu, K.Y. Zhang, J. Luo and Y.P. Chang 13
A Competitive Model Reaction for the Ribosomal Peptide Bond Formation Catalyzed byPeptidyl TransferaseL. Cheng, N. Hong, X.Q. Xu, J. Yang and Y.Q. Zhong 17
A MD Study on the Temperature Influence on Ni/Al Interface at Initial Diffusion TimeY.M. Dai and Y.J. Dai 21
A One-Port Waveguide Method and its Application in Characterization of RadarAbsorbing MaterialsF. Zhao, C.T. Sha, G. Zhao, K. Wang and J.S. Kan 26
Ag-Loaded Wool Spherical-Like Bi2WO6 Nanoarchitectures Photocatalyst DegradePigmentsJ.H. Xia, G.C. Han, G.Y. Huang and R. Chen 30
All-Solid-States Thin Film Lithium-Ion Micro-Battery with SnOX Films Doped with Cu asNegative ElectrodeJ. Lin, C. Liu, Q. Liu and H. Guo 38
Candida rugosa Lipase Adsorption on Nylon-6: Optimization, Kinetic and ThermodynamicAnalysisX.Y. Liu, H.Y. Zeng, P. He, D.H. Peng, B.F.C.A. Gohi, B. Fan, C. Yu and Y.Q. Li 42
[Omim][Pro] Amino Acid Ionic Liquids as a Corrosion Inhibitor for Copper in 3.5 % NaClSolutionX.D. Chen, M. Gong, Q.S. Fu, X.W. Zheng and X.S. Feng 47
Research on Spheroidizing Annealing Progress of 38CrMoAlY.H. Yuan, Z.J. Liu, W.G. Zheng and S.J. Zhong 51
Environmental Impacts Assessment of Liquid Crystal ExtractionFrom Wasted LCD PanelsY.L. Wang, H.J. Hu, S. Qi and G.F. Liu 55
Research and Application of Micro-Arc Oxidation Technology on Magnesium AlloyMotorcycle Key PartsX.D. Chen, Q.Z. Cai, Z.W. Deng and L.S. Yin 63
Modification of Epoxy Resin by Reactive Block Copolymer SEBSMBJ.P. Zhou, H.R. Wu, W.L. Fu and S.J. Jia 71
Influence of Composition and Heat Process to Performance of End Forging with FlangeR.G. Shi, Z.Y. Wang, X.P. Yan and J. Li 75
Based on the Gradient Source Representation of Functionally Gradient MaterialsQ. Li and M.Q. Wu 80
Hydroscopicity and Dielectric Properties of Polyimide Containing Biphenyl and Bis-Benzimidazole RingsY.T. Chen, H.X. Lu and Q.H. Zhang 84
Sheet Polymeric Iron (III) Porphyrin Complexes Catalytic Oxidation of Styrene withMolecular OxygenX.D. Li, X.F. Wang, Y.C. Zhu and M.M. An 88
Semi-Solid State Joining of Aluminum Alloys under Nitrogen Shielding GasA. Geaowdee, P. Muangjunburee and J. Wannasin 92
Application of IR-Spectroscopy for Study of Alumosilicate Raw MaterialsM.S. Lebedev, I.V. Zhernovsky, V.V. Strokova, E.V. Fomina and N.I. Kozhukhova 96
Production Technology and Key Equipments for Ceramsite Produced from Coal Fly Ashand ClayZ.B. Chen and Q. Xie 102
Study on the Structures and Surface Forces of Different Carbon Blacks by Atomic ForceMicroscopyQ.S. Fu, J. Chen, Z.X. Yu and R.S. Yang 106
Study on the Microstructure and Mechanical Properties of Welding Joints of 7A05Aluminum Alloy by FSWD.G. Chen, J.H. Liu, Z.H. Ma and W.L. Yang 110
The Study on the Degreasing Technology of Silk Floss Treated with Leaching MethodH.T. Lin, Y.L. Xu, L. Li, F. Jiang and W.E. Ning 114
The Effect of 0.3%La Adding into As-Casting LA141 Alloy and then Rolls to Thin PlatesH. Zhao, Y.P. Lan and J.W. Zhang 118
Preparation of PVP/TEOS/Nitrates Composite NanofibersZ. Chen, J. Luo, C. Liang and J.L. Liu 129
The Effect of Elastic Pre-Bending on the Laser Peen Forming of 2024-T351 AluminumAlloy PlateL. Chen, Y.X. Hu, G. Fang, Z.Q. Yao and X.W. Zheng 133
Study on Safety of Model II Powdery Emulsion ExplosiveK.M. Zhang and O.Q. Ni 137
Analysis of Low-Cycle Fatigue Crack Growth for Stiffened Plate Based on AccumulativePlastic StrainJ.L. Deng, P. Yang, Q. Dong and H. Wang 143
Research on Technology of High-Pressure Water Jet Incremental Sheet Metal FormingH. Li and X.P. Yang 148
Degradation of a Phenolic β-O-4 Lignin Model Dimer by Electrochemically MediatedDelignification System with Violuric AcidG. Tian, F.G. Kong, S.J. Wang and J.C. Chen 155
Novel Gas Diffusion Electrode System for Effective Production of Hydrogen PeroxideY. Hou, F.G. Kong, S.J. Wang and G.H. Yang 159
Study on Active Compounds of Apocynum venetum LY.Q. Zhong, X.Q. Xu, J. Yang and L. Cheng 163
Using PVA and PVA & Cationic Starch to Improve the Strength of High-Yield PulpY.Y. Sun, F.G. Kong, S.J. Wang and Q. Wu 167
Enhancement of Pulp Strength by Forming Polyelectrolyte Multilayers on APMP FibersG. Tian, Y.Y. Sun, F.G. Kong, S.J. Wang and J.C. Chen 171
Enhanced Hydrolysis of Hemicellulose in Corn Stalk by Alkali PretreatmentY.Q. Guo, W.B. Wang, F.G. Kong and S.J. Wang 175
Kinetics of Electrochemical Delignification Mediated with Violuric AcidY.J. Zhong, F.G. Kong, S.J. Wang and H.L. Chen 179
Modification of Cellulosic Fibers and Adsorption of Chromium (VI) Ion from DiluteAqueous SolutionZ. Xu, W. Liu, F.G. Kong, S.J. Wang and H.L. Chen 183
Numerical Simulation on the Process of Al-Alloy Air Cushion Continuous CastingY.L. Huang and Y.M. Zhang 187
Study on Synthesis of Epoxy Resin Modified with PolysiloxaneJ.L. Han, H.L. Li, K.C. Shao and W. Liu 193
Preparation and Photoluminescence of Fe-Doped In2O3 NanowiresP. Sun, X.K. Sun, Y.K. An and J.W. Liu 198
The Wearability Research of New Environmentally Friendly Acrylic FiberS.X. Zhang, Y.N. Zheng, Y.Q. Li, H.B. Xu, H.X. Zhang and C.Y. Zhu 202
Effect of the Sols’ Zinc Ions’ Concentration on Structural and Optical Properties of (Cu, Al)Co-Doped ZnO Thin Film by Sol - Gel MethodY.X. Yang, H.L. Tan and Q.N. Shi 206
b Frontiers of Manufacturing and Design Science IV
Influence of Temperature Rise in Penetration of Wf/Zr-Based Amorphous MatrixComposite Projectile on Target MaterialX.H. Ye, H.G. Shi, M.M. Zou, K.W. Tian, L.J. Zhu, J. Zhao and W.L. Shi 210
Study on Cashmere Fibers Shrink-Proofing by Potassium Permanganate Based on FuzzMathematics MethodF. Jiang, H.T. Lin, X.X. Yue, J.W. Huang and X.L. Ling 216
Dynamic Analysis of Metal Circular Saw BladeX. Tan, H. Huang, L. Chen and Q.B. Zhang 222
Fabrication of Vanadium Oxide Film with Low Phase Transition Temperature byMagnetron Sputtering and Reduction Post-Anneal MethodY. Qiao, Y. Lu, H. Yang and Y.S. Ling 227
The Aging Characteristics of Composite Insulators under Salt Fog ConditionsX.C. Chen, M.C. Zheng and J.H. Li 231
The Development and Application of Superfine Shaped Acrylic Fiber on BedclothesX.D. Tian, C.H. Ge, J.W. Bi, R. He and H.X. Zhang 238
The Synthesized of Nano-SiO2 and Silicon Modified Polyacrylate EmulsionF.Q. Hou, Y. Zhao, N. Qing and Y.J. Chen 242
Study on Thermal Degradation Characteristics of Pre-Treated ParaffinS.Q. Hu and G.J. Wu 246
Hexagonal Representative Volume Element for Modeling and Analysis of MechanicalProperties of Carbon Nanotube Reinforced CompositesM.T. Le and S.C. Huang 251
Influences of Thermal Gradient and Solidus Velocity on Porosity Content in A201Aluminum Alloy CastingsY.S. Kuo 255
Removal of Cesium from Aqueous Solution Using PAN-Based Ferrocyanide CompositeSpheres: Adsorption on a Fixed-Bed ColumnZ.H. Du, M.C. Jia and J.F. Men 259
Effect of NH4HCO3 Contents on the Microstructure of the Microwave Sintered Porous NiTiAlloysJ.L. Xu, X.F. Jin, J.M. Luo and A.H. Liu 264
Discussion on Loading Moment of Forging Force in Aluminum Alloy Spot WeldingW.Y. Zhang, S.Q. Guo, Y. Li, H. Liang, B.B. Sun and N. Li 268
Effect of Si on the Wettability of SiC/Al SystemS.B. Ren, H. Xu, X.B. He and X.H. Qu 275
Hot Isostatic Pressing of Ti6Al4V Alloys Monolithic Bladed DisksP.J. Xue, Y. Wu, Q.S. Wei and Y.S. Shi 279
Evolution of Material and Properties of CWRM-1700 RollsO. Krivtsova, V. Talmazan, S. Lezhnev, E. Panin and A. Arbuz 284
Microstructures and Properties of Abrasion-Resistant Cobalt-Base Alloy K-C20WNPrepared by Centrifugal CastingS.B. Ren, J.K. Qi and X.H. Qu 288
Microstructure and Properties of Welding Joints of 7A52 Aluminium Alloy by the FrictionStir WeldingD.G. Chen, J.H. Liu, Z.H. Ma, C. Ye and W. Liu 292
Photocatalytic Performance of BiOCl Nanosheets Composite with GrapheneB.T. Liu, L.L. Tian and L.L. Peng 297
Synthesis and Optical Properties Study of ZnS Crystallitic FilmsZ. Liu, S.W. Xie, G.C. Han and Y.Z. Zhou 301
Comparison of Constitutive Laws on the Modeling of Thermo-Viscoplastic Behaviour of anAluminum AlloyX.R. Chu, L. Leotoing, D. Guines and J. Gao 307
The Numerical Analysis and Simulation of Ni-Ti/Si Shape Memory Alloy Micro ValvelessPumpD.H. Liu, L.W. Liu, G. Tang, H.M. Wen, M.X. Xie and Q.G. Lu 311
Effect of Compatibilizer and Flexibilizer on the Mechanical Properties of Acrylonitrile-Butadiene-Styrene)/Poly(Methyl Methacrylate) BlendsS.H. Wang, J. Gao, G.R. Fei, P. Zhang, J. Huang and L.L. Xu 317
Applied Mechanics and Materials Vols. 496-500 c
Notch Sensitivity of Poly(Acrylonitrile-Butadiene-Styrene)/Poly(MethylMethacrylate)/Ethylene Methacrylate Co-Polymer (EMA) CompositesS.H. Wang, J. Gao, S.X. Lin, P. Zhang, J. Huang and L.L. Xu 322
Study on the Mechanical Properties and Surface Gloss of Acrylonitrile Butadiene-Styrene/Poly(Methyl Methacrylate)/Ethylene Methacrylate Copolymer (EMA) CompositesS.H. Wang, J. Gao, S.X. Lin, P. Zhang, J. Huang and L.L. Xu 327
Atmospheric Corrosion of AZ80 Magnesium AlloyL.P. Zhu, Y.J. Zhu, C.L. Wang, C. Lu, X.Z. Fang and X.J. Cao 331
Effect of Sr Addition on Microstructure and Mechanical Properties of Semi-Solid 2024 AlAlloysN. Khunbanterng, S. Wisutmethangoon, T. Plookphol and J. Wannasin 336
Corrosion Behavior Study of 22MnB5 Steel and its Weld Using Electrochemical MethodD. Liu, H.Y. Zhao, D.Y. Tang and Q. Ma 340
Gear Application Feasibility Study of Functionally Gradient MaterialQ. Li, C.B. Yang, X.G. Zhu, X.D. Gao and L. Gu 344
Preparation and Properties of (SiCp+Al2O3f)/7075Al Composites by Pressure InfiltrationH. Xu, S.B. Ren, Q.N. Hong and X.H. Qu 348
Photoluminescence Property of ZnO:Eu Hollow Nanofibers Fabricated by Sputtering UsingElectrospun PVP Nanofibers as TemplatesH.P. Wang 352
Refining Molten Steel with Argon Blowing by Metal Nozzle Mold BottomR.G. Shi, Z.Y. Wang, S.G. Yang and X.P. Yan 357
Optical Properties of CuAlO2 Synthesized by Sol-Gel MethodQ.X. Lin, F. Miao and Y. Huang 362
Tensile Properties and Plasticity of Semi-Solid Cast 6061 Al Alloy at Elevated TemperaturesS. Songkuea, P. Sripan, S. Wisutmethangoon, J. Wannasin and T. Plookphol 366
Investigation of Microstructure and Mechanical Properties of Semi-Solid State Joining ofSSM Aluminum AlloysA. Petkhwan, P. Muangjunburee and J. Wannasin 371
Improvement of Performance of Traditional Photocatalysis and Development of NewPhotocatalysis Materials and TechnologiesW. You 376
Functional Polypropylene/High-Absorption Polyacrylate/Bletilla Striata Nonwoven Fabrics:Process and Characteristic EvaluationsJ.H. Lin, Z.H. Wu, C.Y. Chang, C.T. Lu and C.W. Lou 380
Preparation and Property Study of PTT/CAB Blend FibersL.Y. Wang, G. Li and L.J. Yang 384
Numerical Characterization of the Effect of Coating Solid on Binder DistributionY. Li, W.J. Gu and B.G. He 388
The Influence of Ti/N Ratio on the Effective Boron and Mechanical Properties of LowCarbon Boron Alloyed Bainitic SteelT. Zhang, H.X. Hou and J.P. Chen 392
The Micro Crack Nucleation Rule and Fracture Behavior of Titanium Aluminum AlloyX.B. Yi, Z.Y. Rui, R.C. Feng, C.F. Yan and Y.R. Zuo 396
Study on Step Type Vibration Tapping of SuperalloyF.Q. Han, Z.Z. Li and D.Y. Zhang 401
Recovery of Copper from Copper Smelter Slag by FlotationX. Tong, B. Han, S.P. Ren and B. Yang 406
Research on Au-Bearing Copper Ore in Flotation from YunnanX. Tong, X. Wang and Z.B. Deng 410
Matching Principle of Material Selection in Product DesignJ.A. Han, F. Li and H.C. Xia 414
Hot Working Manufacturing Process of Large Mine-Used Rotary KilnRolling RingForgingsR.G. Shi, S.J. Jiang, Z.Y. Wang and X.P. Yan 418
Numerical Simulation of an U-Channel Component Tailored Tempering ProcessConsidering the Effect of Stress on the Shift of TTT CurvesB.T. Tang, Q.L. Wang and S. Bruschi 425
d Frontiers of Manufacturing and Design Science IV
Structural Optimization of Composite Panel with Lamination Parameters and EquivalentStiffness Laminate MethodX.P. Zhong and P. Jin 429
Effect of Mechanical Refining Treatment on Fiber Grafting ModificationW. Liu, F.G. Kong, S.J. Wang and Q. Wu 436
Mechanical Behaviors and Thermoforming Features of PMMA Used In-Mold DecorationS.M. Chen and S.J. Zhang 440
Microstructure and Mechanical Properties of Welding Joints of High Nitrogen Steel byHybrid Laser-Arc WeldingZ.H. Ma, D.G. Chen, H.W. Liu and W.L. Yang 444
Analysis and Test: Impregnated Diamond Cutters for Oil Drilling BitH. Lan, Q. Xue and C.Y. Cui 448
Discussion on Finite Element Model for Three Dimensional Rolling Process AnalysisC.C. Shen 452
Analysis of Press-Extrusion Forming for Embossment on the Stamping PartC.C. Lin, K.S. Wang, Y. Xu and L.H. Zhang 456
Manufacturing Technique and Property Evaluations of Degradable Sound-AbsorptionPlatesJ.H. Lin, Y.H. Shih, J.M. Chen and C.W. Lou 460
Effect of Fiber Fineness on Acoustic Absorption Property of Nylon 6/Low-MeltingPET/Recycled PET NonwovenC.W. Lou, Y.H. Hsu, T.T. Li and J.H. Lin 464
Manufacturing Technique and Property Evaluations of Conductive Nonwoven FabricsC.W. Lou, C.M. Lin, Y.C. Yang, Y.T. Huang and J.H. Lin 468
Electromagnetic Shielding Effectiveness and Manufacturing Technique of Metal ComplexFabricsC.W. Lou, A.P. Chen, T.A. Lin, Y.Y. Chuang and J.H. Lin 472
Methods of Swanson Constitutive Model Establishment for Composite Solid PropellantC. Ning, H.F. Qiang and G. Wang 476
The Research on Surface Metamorphic Layer of Punch Matrix in WEDMC.Q. Lin 481
Discussion on Metal Heat Treatment in Nuclear Power PlantJ.J. Zhang, J. Mei, J. Hu and L.X. Zheng 485
Research on Mechanical Properties and Appearance of Mulberry Silk Soaked with CleanWaterJ.W. Huang, J.W. Hong, L. Huang, B.Q. Lin, X.L. Ling, H.T. Lin, F. Jiang and X.X. Yue 493
An Improved Continuous Gas Lift Design Method with Variable Pressure DropL. Wei, R.Q. Liao, Y. Li and R.D. Feng 497
Grinding Experiment Research of Face Gear with CNC MachineH. Guo and S.Y. Zhang 503
Research on the Effect of Distributor Aperture Ratio on Fluidization Quality of VibratedFluidized BedB. Li, S.D. Chen, X.W. Kong and S.T. Zhang 507
Study on Improving of the Iron Concentrate Grade Index by CentrifugeZ.P. Cai, X. Wang and X. Tong 512
Machined Surface Quality Improvement Measures Affecting Factors and ResearchH.C. Yang and M.Q. Wu 516
Molecular Docking Studies on the Interaction of 2-Arylpropionate Esters with Candidarugosa LipaseX.Y. Liu, H.Y. Zeng, D.H. Peng, B.F.C.A. Gohi, Q.J. Huang, C. Yu and Y.Q. Li 520
Comparative Inspection of Terbufos in Blood from Head Skin by GC-MSJ.P. Xu and D.Q. Tao 524
Rapid Detection of H2S in Heart Blood by Chemical Method and GC / MSP. Xu, D.Q. Tao and W.W. Liu 528
Research Progresses and Development Trends of High-Efficacy PhotocatalystsW. You 532
Applied Mechanics and Materials Vols. 496-500 e
Optimization of Super-Long CNT Forests Growth on Conductive Substrate by WaterAssisted CVDP.B. Wang, D.Y. Xu and L.N. Sun 536
Chapter 2: Research and Design of Machinery, Equipment andTechnological Processes in Mechanical Engineering
Design and Manufacture of a Unilateral Permanent Magnet Linear Motor for AssemblyQ. Liu and Y. Fei 543
Impact of Structure Design of Artififical Upwelling TubeJ.Y. Leng, J.W. Chen, H.C. Huang, S. Lin, M.Z. Liu and J.B. Liu 547
Calculation of the Effective Value of the Uplift Depth for the Tower Foundation in SlopingGroundL. Xu, Y. Wan and P.P. Jiang 551
The Research of Grouting Sandblasting Carrying Manipulator Based Wax Casting-LineY.J. Li, F. Wang, Q. Zhang, C.C. Li and Y. He 557
A Damage Model for Low Cycle Fatigue Analysis of Stiffened PlatesQ. Dong, P. Yang, J.L. Deng and H. Wang 561
Research on Ultimate Strength and Accumulated Plastic Deflection of Box Beam underCyclic LoadingH.W. Cui, P. Yang, C. Sen and L. Zhou 567
Analysis of Fatigue Life in High Temperature of W Pattern Sealing Rings Used in AircraftEngineX. Chen and Y. Wang 571
The Improvement of Complex Structure of Single Cylinder Double Acting Piston PumpC. Dong and W.G. Zheng 575
The Review of Workpiece Loading and Unloading Robot in the Catenary Shot BlastingY.J. Li, P.J. Sui, Q. Zhang, C.C. Li and Y. He 578
Optimizing Product Development Projects Based on the Clustered Product DesignStructure Matrix (DSM)Q. Yang and E.L. Tang 582
Study on Hull Deformation at Supports of Propulsion Shaft of a Large Container ShipX.K. Ruan, P. Yang, X.P. Yan and Z. Huang 586
Research of Reinforce Stress on the Pressure Structure of Submersible VehicleG.N. Chu, Q.Y. Zhang and G.C. Lu 590
A Numerical Simulation of Steady-State Temperature Field of Natural Gas Engine PistonD.Z. Jing and W.G. Zheng 594
Study on Structural Analysis for One-Cylinder Vertical Engine Assembly by FEA MethodY. Wang 597
Study on Modal Analysis for Motorcycle Frame by CAE MethodJ. Wang, Y. Wang and Y.H. Liao 601
Design and Test of Pico Crossflow Turbine for the Generation of Electricity for Use in theRural AreaY. Keawsuntia 605
Dynamic Response of Elastic Beam to a Moving Pulse: A Theoretical Study on CriticalVelocityC.Q. Qian, Z.J. Zheng and J.L. Yu 609
The Relationship between the Period of Spontaneous Combustion and the Wind SpeedX.L. Sun, E.X. Gao, Q. Wang, S.S. Xu and C.Y. Li 613
Suspension Optimum Design Considering Tire and Vehicle MatchingF. Bai, K.H. Guo and D. Lu 617
Structural Optimization Design of Body of Oil-Perforating GunM.J. Zhao and G.Z. Zhu 621
Strength Analysis and Optimal Design on Flip Axis of Steel Roll ClampF.H. Wang and W. Han 626
Design of Transient Electromagnetic Transmitter Based on FPGAL. Zhang, Q.M. Duan, H. Sun, T.Z. Huang, J.W. Shi, D. Wu and Y.J. Han 630
f Frontiers of Manufacturing and Design Science IV
Study on the Influence of Gear Rattling on Pitting Fatigue FailureG. Shen, D. Xiang, N. Xie, P. Mou, W. Yang and Q. Zhao 634
Design of Impeller of Centrifugal Compressor for Water-Air EngineY. Wang and W. Zhang 642
A New Method to Extract Substructures for the Multi-Shaft TransmissionC. Tong, H. Li and J. Yao 646
Design and Validation of Sensor Balance for Propeller ExperimentJ. Jiao, B.F. Song and Y.G. Zhang 652
Lightweight Design for Coal Mine Rescue Robot’s Swing Arm BracketsC.W. Wang and H.W. Ma 657
Crane Wheel-Rail Contact Stresses Research Based on Experimental Test and FiniteElement AnalysisF.Q. Wu, J. Zhang and W.Q. Yao 662
Effect of Welding Procedure on Main Girder Fatigue PropertyG. Shen, D. Xiang, N. Liu, P. Mou, Y. Yang, J.M. Jiang and X.L. Li 666
Suspension Parameter Design Based on Equivalent Linearization MethodJ. Li, X.P. Jia, K.L. Yu and L. Zhang 673
Design and Analysis of a Novel Mini-Type Centrifugal Friction Speed LimiterZ. Xie, G.Y. Liu, Y. Wang and Y.Q. Liu 677
Structure Design and Simulation of Lithium-Ion Battery Casing MachineQ.X. Xia, L.B. Ji, Y.X. Li, X.J. Liu, Z.W. Li, C.L. Huang and Y. Huang 683
The Optimization Design of Combination Sleeve Based on ANSYSY.D. Gao, W. Li and H.Y. Wang 688
Study on the Performance of Water Lubricated Stern Tube Bearing Based on FluentJ. Liu, Z.L. Liu, X.K. Meng and X.X. Liang 692
The Profile Error Feedback Optimization for the Design of a Showerhead SystemControlling Gas Flow Uniformity in a Thin-Film ReactorH.X. Xia, D. Xiang and P. Mou 697
Application of Sonic Nozzle in Unsteady Flow Rate Generating System for CompressibleFluidX.X. Wang, T. Wang and J.Z. Wang 703
Analysis of Structure Characteristics and Improvement of Turbo-Supercharger BearingH. Gan, K.Y. Yang and X.L. Yang 707
Causes of Surge of Turbocharger for Marine Diesel Engine and Measures against SurgeN. Liu and Y. Leng 711
A Novel Simplified Distributor Model of Fluidized Bed Based on the Porous Media TheoryB. Li, W. Liu, X.W. Kong and S.T. Zhang 715
Optimal Design of a Four-Legged Walking Mechanism Based on BionicsW.G. Cai, Z.G. Shang and L.B. Wu 719
Effects of Fuel Supply Advance Angles on Performance of Engine Fueled with ButanolDieselM.W. Xiao, J.H. Zhang and J.G. He 724
Surveillance Ship with Fuel Cell Performance Analysis and DesignY.D. Kuan, J.Y. Chang, M.S. Huang, Y.Y. Chu, Y.C. Chen, H.L. Huang and G.S. Huang 728
The Improved Structure of Swash Plate Axial Piston PumpC. Dong and W.G. Zheng 733
Analysis for Initial Status Parameters of Parachute AircraftJ. Zhao, J. Li, C. Liu and B. Li 736
Research on the Effects of Tires on the Vehicle HandlingH.M. Chen and K.H. Guo 744
Study on Dynamical Simulation of Swing Movable Teeth ReducerY.F. Wang and B. Yang 749
The Kinematics Modeling and Simulation of a Mechanical Arm in Nuclear Industry withPostpositional DriveR.F. Zhao, Z. Zhang and J.Q. Cui 754
Modeling and Simulation of a Certain Warship Diesel Engine Based on AMESimX.H. Quan, J.J. Quan and H. He 760
Applied Mechanics and Materials Vols. 496-500 g
Mechanical Design and Analysis of a Tracked Mobile System for Patrol RobotJ.Q. Cui, Z. Zhang and R.F. Zhao 764
Hemispherical Parts Numerical Simulation of Deep DrawingB.L. Su 769
Study on the Suck Rod Design and EvaluationM.L. Zhang, R.Q. Liao, Z. Qin, P.Y. Yao and Z.C. Dong 773
Analysis of Microstructure and Mechanical Properties of Bearing Inner RingM.L. Qi, X.J. Zhao, Y.T. Wang and P.T. Liu 777
Design and Singularity Analysis for Nine-Bar Mechanism of Three Crank Hybrid DrivenS.T. Song, R.Q. Li, Y. Gao and D.H. Li 781
An Optimal Design of Scrub Radius for Automobile Suspension Based on Adams SimulateZ.Y. Li, Z.R. Dong, S.F. Liang and C.W. Han 785
The Design & Calculation for Hydraulic Cylinder of a Special Machine for Heat ExchangerTube Bundle Drawing and AssemblingK. Yang, S.J. Guan and X.D. Wang 789
The Key Technologies in Designing of a Special Machine for Heat Exchanger Tube BundleDrawing and AssemblingK. Yang, S.J. Guan, J.B. Jia and C.Z. Wu 793
Optimization Design of Cable-Frame Antennas Based on Tension Compensation MethodY.L. Zong and H.J. Cao 797
Modeling and Computational Analysis of Diesel Engine Working Process in PlateauEnvironmentX.C. Wang, R.T. Li, X. He and J.B. Hu 804
Process Analysis of Oblique GibsX.P. Liu 808
CNC Lathe Drive System DesignM.Q. Wu and Q. Li 812
Influence Analysis of Machine Tool’s Turntable Angle Errors to the Roundness ofMachined HoleQ. Cheng, H.W. Zhao, L.G. Cai and P.H. Gu 816
The Bottle Opener Stamping Mold DesignZ. Wang 823
The Effect of the Pressure Drop Ratio on the Performance of a Novel DynamicHydrocycloneG.S. Li, J.W. Chen, C.Y. Xu, B.H. Zheng and Z.L. Yuan 827
Kinematic Analysis of a Spatial 6-Bar Linkage MechanismL.X. Xie, Z.X. Tian, J.Y. Kong, G.Z. Jiang and G.F. Li 831
The Finite Element Analysis of Derrick Translation System in Vehicular Pressure BalanceWorkover RigM.Y. Yan, C.Y. Li and J.Q. Jin 836
The Kinematics Simulation Analysis of a Spike-Picking Roller for a New Self-PropelledMaize Harvester Based on ADAMSZ. Ming 841
Study on Valve Train Analysis for One-Cylinder Vertical EngineJ. Wang, Y. Wang and Y.H. Liao 845
Simulation Analysis and Studying of Die Casting Forming Process for CrankcaseW.G. Zheng, Z.J. Liu, N. Yang, C.L. Li and X. Yang 849
Research on the Pulse Current Distribution of the Hollow Cylinder SurfaceT. Wang, B.H. Zhou, W. Li, Y.F. Ding, Y.X. Li, B. Yang and Y.P. Fu 853
The Mechanical System Structure Design and Kinematics Analysis of the BipedalHumanoid Robot LegD.Q. Cui, H.B. Xin, L. Liu, T. Wang and Y.F. Xin 857
The Design of Flexible Bearing Life Test DeviceL. Liu, H.B. Xin, D.Q. Cui, Y.F. Xin and T. Wang 861
Biaxial Stretching Technology and its DevelopmentY.F. Xin, H.B. Xin, Z.Y. Xue, Q.L. Li, D.Q. Cui, L. Liu and T. Wang 865
The Design of a Small Composting System and Turning DeviceT. Wang, H.B. Xin, Z.Y. Xue, Q.L. Li, D.Q. Cui, L. Liu and Y.F. Xin 869
h Frontiers of Manufacturing and Design Science IV
A Height Adjustable Tool HolderT.H. Ma 873
Analysis of Off-Design Flow Field and Prediction of Performance in Hydraulic TurbineF.X. Shi, J.H. Yang and X.H. Wang 877
Comparative Analysis of Hydraulic Energy-Dissipation Damper Performance Based onAMESimM. Zhang, H.K. Wang and X.S. Qian 881
Structure Improvement Analysis of Maize Root Stubble HarvesterD.W. Shao, J.F. Wang, D.H. Jiang, X.H. Li, G.F. Wu, Y.J. Liu, D. Xue, J.Y. Luan, K. Zhao, F.X.Li and L.Y. Wang 887
Gas Storage Cavity Simulation Experiment Research and ApplicationJ.F. Wan, R.C. Shen, Z.Y. Ji and J.B. Xie 891
Identification of the Lumped Parameters for Hydraulic Bushing Based on FSI FiniteElement SimulationL. Li, X.N. Liu and X.L. Feng 896
Structure Optimization Design of Vane Steering PumpL.F. Yang 904
Research for Breaking Explosives Green Safe Technology and AdvancedF. He, F.J. Meng, L.G. Lai, Y.H. Zhang, R. Hong, J. Gao, H. Yang and H.J. Chao 908
Simulation of Gas-Solid Flow Characteristics in Three-Dimensional Rotational Spouted-Fluidized BedX.F. Long, Y. Liu and B. Lou 913
Analysis of Stimulated Brillouin Scattering in a Single Mode Fiber RingX.M. Zhang, Y.K. Ci and J.L. Yao 918
Studies on the Prediction of Landing Impact for Airborne VehicleJ.Y. Li, H.Y. Wang, Q. Rui and H.J. Hong 922
Simulation of Transmission Efficiency for Different Bending Radius of Aerosol SamplingInletB.Q. Wang, R.H. Chen, Z.B. Wang, Y.Y. Li, S. Yao and S. Yin 927
New Method of Fault Knowledge Acquisition of Electronic EquipmentZ.C. Huo, Q.S. Sun, F.J. Qi and G.B. Ding 931
Simulation and Optimization on Dynamic Hydraulic Drawing for Spiral Bottom Shell PartsW.C. Zhou, W. Zhou, C.P. Liu and S.H. Xiao 935
Equipment Design for Supercritical Cleavage TechnologyC.H. Zhou, Y. Bai and M.F. Hu 939
Application of π Equivalent Circuit in Mathematic Modeling and Simulation of GasPipelineJ.R. Wang, T. Wang and J.Z. Wang 943
Maintenance Study of a Pilot Biomass Pyrolysis InstallationS. Honus and P. Bukowski 947
Research on Fault Diagnosis Method of Steam Turbine Unit Based on the Theory of SuperBallX.W. Deng, Y.P. Han, C.C. Wang and Y.J. Gu 953
Based on Maximo Preventive Maintenance of the CraneJ.W. Leng and Y.M. Zhao 958
Analysis of Vibration Characteristics for Wind Turbine GearboxG. Shen, D. Xiang, P. Mou, J.M. Jiang and L. Gao 962
Parameter Design and Simulation Research of Power System for Electric VehicleW.L. Wang, W.Z. Liu, B.Q. Tao and J.W. Ma 969
Numerical Simulation Analysis for Influence of Lateral Inclination Angle on the YachtResistanceF. Fu, Y.Q. Liu and X.X. Wu 974
Design of Pneumatic System in Warm Extrusion Forming Process Manipulator for SteelConnecting SleeveX.J. Zhang, Z.M. Yang and S.L. Yang 978
Discussion Based on the Condition of Transformer Parallel OperationX.Q. Yan, Y.L. Ruan and F. Cao 982
Applied Mechanics and Materials Vols. 496-500 i
Fluid Factors Research in High Pressure Abrasive Water JetZ. Li and W.T. Di 986
Analysis of Mechanical Seal Leakage within Hydrostatic on Nuclear Reactor Coolant PumpH.Y. Zhang, W.B. Zhu and Z. Gang 990
Quantitative Assessment on Blast Effects of the Boiler BLEVEF. Qu, H. Tian, Q.Y. Zheng and Y.L. Zheng 995
State of Charge Estimation of Lithium-Ion Battery Using Extended Kalman Filter Based ona Comprehensive ModelH. Li, S.Y. Liu and Y. Yu 999
Forecasting Algorithm of Heavy Vehicle Roll over Based on Road CollaborativeD.Z. Jing and W.G. Zheng 1003
Design a Kind of Oblique-Cone-Sliding-Ring Assembly Seal DeviceJ.H. Fang and W. Yan 1007
Study on Pneumatic Control of Shotcrete Machine Booster ManipulatorR.F. Song, F. Yang, L. Zhao and Y.T. Yang 1012
Modal Testing and Analysis of Z-Axis Supporting Plate for High–Speed PCB NC DrillingMachineL. He, G. Huang, H.Y. Wu and Y.L. Lei 1016
Chilled Energy Storage for Air-Conditioning System of BuildingsX.J. Shu 1020
Modeling and Simulation for the Feed System of CNC MachineQ. Wu, J.J. Yang and C.L. Lei 1024
Analysis of Pre-Tightening Strength of Ship Tail Shaft Coupling Based on WorkbenchSoftwareX.X. Liang, Z.L. Liu and J. Liu 1028
Nissan Car Test Bench Research Production and Use of TeachingL.F. Yang and C.Q. Ma 1032
Simulation Research on Resistive Coupling of High-Speed RailwayY.D. Chi, T.H. Tan, K.Y. Yang, Y.H. Gao, H. Ke, H.L. Gu and J.Y. Zhao 1036
Analysis of the Improvement of the Drawing Die in Drawing DeviceW. Liu, D.M. Wang, G.H. Liu, Z.Y. Zheng and J.T. Jiang 1041
A Novel Design on Uniform Heating Wire Coil of Induction CookerJ.X. Zhu and Q. Tong 1044
Magnetic Levitation and Rotation for Feasibility of Free-Form MachiningA.H. Shih and S.Y. Liang 1048
Elasto-Plastic Fracture Analysis of Finite-Width Cracked Stiffened PlateJ.L. Deng, P. Yang, Q. Dong and X. Yan 1052
Study and Design on High Temperature Air Combustion of Hot Blast StoveF.M. Zhang, Z.R. Hu and S.S. Cheng 1058
The Influences of the Load Distribution Pattern and the Position of the Locomotive onTrain Longitudinal DynamicsY. Xu, S.Y. Zhao and N.N. Wang 1063
Mechanism Modeling and Analysis of a Small Unmanned Vehicles Using Vortex LatticeMethodX.J. Zang, Z.D. Zhang and C. Liu 1068
Study on the Recovery Circuit Based on Multi-Module STRETCH Meat GrinderH. Liu, S.H. Bi, X.J. Yu, J. Li, Z. Li and P.Z. Liu 1073
An Improved VSVPWM Strategy of Considering Neutral-Point Potential Balancing inThree-Level NPC ConverterS.W. Gui, L. Wang and S.H. Huang 1079
Research on Temperature Distribution for Tubing Liquid with Hot Natural Gas InjectedAnnulus Using Gas LiftL. Wei, R.Q. Liao, Y. Li and J. Wu 1084
Study on Dynamic Characters of Interaction Effect of Precision Machine Tool-BoxFoundation-SoilD. Yi, Y. Ning, Y. Tian and Z.F. Liu 1088
Design Parameters Sensitivity Analysis of Lathe SaddleM.D. Duan, K.H. Liu, X.X. Ji and T.F. Zhang 1092
j Frontiers of Manufacturing and Design Science IV
The Research of the New High Voltage Reactive Power Compensation Device Based on theCompound SwitchY.S. Wang and X.D. Qiao 1097
Discussion the Method of the Flocculation Flow Field Measurement by PIVJ.F. Gao 1101
Preliminary Exploration of Electrohydrodynamic Wind PowerS.F. Zhang and X.M. Zhang 1105
Design and Simulation of an Improved Doherty Power AmplifierY. Liu and H.B. Xiao 1109
Design of NdFeB Permanent Magnet DC GeneratorY.Y. Wu 1113
Research of Factors Affecting the Yarn Tension of a Winding MachineH.X. Zhao and D.G. Chang 1117
The Fault of Hydraulic System and TroubleshootingH. Wen and C.F. Yao 1121
A Solar Battery Structure for Consumer Electronic DevicesC.X. Li, D.W. He, Y. Li, M. Sun, X. Chen, Z.H. Zhang and J.J. Shen 1125
Design of Vibration Isolation Device for Ship Power Equipment and Investigation on itsDynamic PropertiesY.Y. Fang, G.H. Zhang, Y.F. Li and P.Z. Qi 1129
Research on Cushion Characteristics of Self-Inflating Buffering AirbagH.J. Hong, H.Y. Wang, Z.Y. Lv and J.Y. Li 1134
Vibration Testing System for Ventilator Based on Virtual InstrumentZ.Y. He, X.F. Huang and Z.F. He 1139
Study of Frequency Conversion Energy-Saving Reconstruction for Central Air-ConditioningH.Y. Hua and Z. Zhang 1143
Research of Stress Assessment Based on Singularity StrengthS. Gao, L. Xu, D.Z. Wang and F. Ma 1147
Structural Analysis and Optimization of Electric Scraper Drive Axle Housing under Multi-LoadY.J. Zhang, L.Q. Kong and J. Shi 1152
RF Coaxial Open Standard Calibration Technology ResearchC.T. Sha, F. Zhao, Y.Z. Yin and J.S. Kan 1157
Wavefront Aberration Detection: A New PerspectiveJ.Q. Kang, X.M. Cheng and Q. Hao 1164
Finite Element Modeling of Optical Path Length Control Device for Laser GyroscopeX.D. Yu, Y.P. Xie, P.F. Zhang, G.F. Lu, Y.N. Xu and X.W. Long 1169
The Research of IC Test Based on LTX-77 Test SystemL. Tan and Y. Fang 1176
Researches of the Measurement Instrument in the Plastic Injection Machine Bore and DataProcessingT.N. Yang, X.J. Wang and H.Y. Wu 1180
The Design of Ward Calling System Based on SCMM. Ji and J.F. He 1185
Study on Inner Cooling Grinding in a General Surface Grinding MachineY.H. Liao, Y. Wang and L.D. Zhang 1189
Nonlinear Dynamic Analysis of Rigid - Loose Coupling Bidirectional Vibrating-CrushingSystemJ.C. Zhang and L.C. Wang 1193
Research and Implementation of IVI-COM Driver for Digital OscilloscopeZ. Li and H.H. Wu 1197
The Design of Food Safety Rapid Detection EquipmentF. Zhong, F. Wang, H. Yang and D.Z. Zheng 1202
Design of Multi-Channel Physiological Signal Monitor Based on Wireless DataTransmissionZ. Zhang and F. Liu 1207
Applied Mechanics and Materials Vols. 496-500 k
The Study on the High-Speed Electrified Railway Electromagnetic Interference ImpactY.D. Chi, Y.S. Mu, L.S. Yang and H.L. Gu 1211
Turning in Place of Grinding Application and Exploration in the Actual ProcessingT.H. Ma 1215
Chapter 3: Mechatronics, Control and Automation of ManufacturingProcesses
Fuzzy PID Control System for Sludge Digestion Tank TemperatureS.Q. Xue, W.Z. Yan and L. Ma 1221
Research on the Cooling Fan Speed Control Scheme of the Large Power Vehicular DieselEngine in Altitude EnvironmentX. He, X.C. Wang, J.B. Hu and Z.X. Sun 1226
Study on Co-Simulation and Experiment of a Series-Parallel Hybrid Electric VehicleD.J. Huang 1231
Optimal Selecting Strategy for Tool Size of High Efficiency Milling of Complex CurvedSurfaceH. Liu, Y. Zhang and L.L. Luo 1235
Typical Structure Parts Library Design and Research on Machine Tool FixtureX.F. Zhang and Y. Cao 1240
Fault Tolerant Permanent Magnet Motor 's SVPWM Control and Analysis of Fault-Tolerant Performance under Fault ConditionsJ. Yang, J.B. Guo, H.C. Dong and H.D. Zhang 1244
Research on Control System of Quasi-Homogeneous Lean-Burn EngineJ.J. Wang, J.W. Tao, H.D. Zhang and J.B. Guo 1248
Air Thin-Walled Parts Machining Precision ControlL. Li 1252
Virtual Prototyping Simulation of Flexible Multi-Point Auxiliary Support Fixture for BladeMachiningY. Cao, J. Li, J.H. Tian and Q.M. Fan 1256
Research on Torque Control of Brushless DC Motor for Electric VehicleW.Z. Liu, W.L. Wang, B.Q. Tao and J.W. Ma 1260
Design of Soft-Switched InverterL. Wang, Z.Z. Zhang, F. Liu and G.B. Ding 1265
Research on Static Stiffness Test System for BIWW. Liu, L.L. Wang and C.H. Wang 1269
Design of Electromagnetism Compatibility for Automatic Loading SystemG.B. Ding, F. Yao, G. Ren and J. Yu 1273
Research on the Influence of Load Disturbance on the Crystallizer PID Control SystemJ.X. Gao 1277
The Design and Research of Active Clamp Forward Converter Based on IR1150Y. Fang and L. Tan 1281
The Detection on Hydraulic of a Certain Type Equipment Based on C8051F020K. Cheng, L.T. Li, L. Lei and J. Luo 1285
Design of High Accuracy Robot Welding Machine for a Cone BottomD.H. Tang and D.Y. Luo 1289
Disturbed Chaotic Systems Synchronization via Robust Mixed Functional ProjectiveMethodT. Fan, N. Fang and F. Tan 1293
Defect Detection of the Segmental Spherical Shell Based on Ultrasonic Transducer ArrayX.P. Li, C.G. Xu, L.J. Wang and W. Dai 1298
Dry-Mixed Mortar Control System Based on Fieldbus and PLCH. Zhang, S.Q. Shang, L.N. Gong and C.H. Huang 1304
Intelligent Identification and Locating System of Steel Coil Based on Laser TechnologyY.C. Wang, S.Y. Zhou and Z.P. Yuan 1308
Research on Open CNC System for Rolling Machine Based on PMACS.P. Deng, C.C. Cao, H.C. Sun and X.B. Wang 1313
l Frontiers of Manufacturing and Design Science IV
Research on the Shift Schedule of Dual Clutch Transmission for Pure Electric VehicleP. Han, X.S. Cheng, Y. Huang, Q. Gu and H.B. Hu 1318
Research of Single-Device Test Based on Relay Protection Simulation and Training SystemT. Wang, G.H. Lin and D. Han 1322
Design and Implementation of the Airborne Laser Effector for Autonomous PipelineAlignmentH.F. Liu, R. Wang and S.S. Zhong 1327
The Application and Improve of Fuzzy Clustering in Classifying Control TargetsC. Liu, J. Li, J. Zhao and Z.D. Zhang 1333
Simulation Analysis of Synchronization Control for Ultrahigh Pressure SterilizationEquipment Based on AMESimG.H. Fang and X.Y. Li 1340
Far-Field Energy Density of the Laser Detection SystemQ. Liu and G.Y. Zhang 1344
Small Module Involute Gear Precise Modeling and NC MachiningH. Sun 1348
The Variable PWM Frequency Control Research for the Motor in WheelC.X. Song, S.L. Peng, S.X. Song, J.H. Li and Z. Zheng 1352
The Timing Control Research for the Motor in WheelC.X. Song, S.L. Peng, S.X. Song, J.H. Li and F. Xiao 1356
Parameter Matching and Performance Simulation for a Distributed Power Extended-RangeElectric VehicleD. Wang, C.X. Song and S.X. Song 1360
Research on Airline Operational Control Model Based on Analytic Hierarchy ProcessL.S. Li 1365
Introduction to Intelligent Transportation Vehicle DetectorY.D. Chi, D. Yuan and X.T. Yang 1369
Research on a Fiber Bragg Grating Strain Sensor for Tower VibrationJ.F. Geng, H.S. Cai, Y.T. Wei, X.H. Shen and J.W. Dong 1373
Monitoring and Control System of Underground Coal Gasification Based on IndustrialEthernet and PLCG. Li, W.J. Li, Q.Q. Su, C.F. Sun and Z.Y. Ge 1376
Design of High-Power Diode Laser Power Source by Single ChipJ.J. Li, D.P. Yang, G. Guo and Z.Y. Li 1381
Design and Development on Full Scope V&V Simulator of Nuclear Power PlantQ. Gao, K.F. Zhou, S.G. Yang, H. Mao and J. Zhu 1385
Design of High-Speed Communication on the Detection EquipmentW.X. Zhang, W.B. Bai, L.T. Li, J.W. Hu and C. Feng 1390
Inter-Stator Synchronous Combined Method Based on SVM-DTC for Primary WindingDiscontinuous PMLSML. Chen, H. Zhu, S.G. Sun, Y.Y. Li and L.G. Zhu 1394
Design of Missile Longitudinal Control System Based on Backstepping ControlM.H. Li, J. Yin, X.Y. Sun, J.X. Xu and M.M. Zhang 1401
Self-Adaptive PID Control of Hydraulic Quadruped RobotK. Chang, X.J. Han and Y. Yang 1407
Research Gravity Compensation for Master Manipulator with Time DelayH.M. Wang, Z.J. Du, Z.K. Zhao and R.Q. Liu 1413
Design of Control System of Brushless DC Motor Based on DSPL.N. Duan and J. Zhao 1417
The Visual Analysis of the Research Front in Robot Field Based on Keywords Co-OccurrenceM.H. Yang, T.F. Wang and Z. Zhang 1422
Research Humanoid Robot Walking Based on Vision-GuidedZ.L. Zhang, Y.Y. Song, W.D. Zhang and S. Yin 1426
PLC-Based Network Control System of Nitrogen Pressure MachineW.J. Teng 1430
A New Design of Laser Pulse Receiver in the Automatic Control SystemL. Wang, B. Mo and K. Gao 1434
Applied Mechanics and Materials Vols. 496-500 m
Service-Oriented Framework for Oil Fields AutomationE. Cardoso Moraes and H. Augusto Lepikson 1438
FPGA-Based High Precision and Low EMI Switching Power Supply DesignS.R. Zhang, Z. Li and A.J. Zhu 1442
Design of Temperature Controllor in Diamond Synthetic Chamber Based on Multi-Objective Particle Swarm OptimizationH.Y. Hua and C. Zhao 1448
Simulation Analysis of Vector Control of Fuzzy-PID System Based on Mine Fanner LoadY.X. Wu, C.Q. Zhou, C.J. Zhang and P. Sun 1452
Research on the Network Based Protection to Settle the Distribution Networks Three-PhaseShort-Circuit Faults with Distributed GeneratorsY. Xu, Q.C. Yuan, X.Y. Huang and L. Jiang 1457
An Ultrasonic Micro Scalpel Based on Exponential Horn Silicon ChipT.T. Wang, J.Y. Wang, W.Q. Zhang and H. Guo 1464
Autonomous Control of Non-Silicon MEMS Flexible Micro-Assembly LineG.Y. Zhang, X. Jin and Z.J. Zhang 1468
Research on Dynamics Measurement of Piezoelectric Sensor Based on PVDF FilmsQ. Zhang, Y.J. Li, G.C. Wang, R.J. Ma and X.Y. Zhao 1473
High-Voltage Three-Phase Asynchronous Motor Soft-Starter via Hyristor for WaterCooling System of Steel MillY. Yang and M. Yang 1477
Ceramic Filter against the Regeneration Air Pressure and Flow Control System DesignX.L. Diao 1481
The Effective Use in the Process of Numerical Control Technology in MechanicalManufacturingL.F. Yang and H. Sun 1485
A Method for Measuring Weld Bead in Grinding and Polishing ProcessJ. Zhao, J. Zhao, L. Zhang, C. Fan and F.F. Han 1489
Design of Intelligent Transmission System for Mining Belt-Conveyor GroupS.P. Deng, X.Y. Wang, Y.M. Qi, C.M. Wang and K. Sun 1494
Visualized Modeling and Simulation of Manufacturing Execution System in Dynamic Job-Shop SchedulingY. Cao, L.W. Jia, S. Cao and Y. Bai 1498
Design of Ship Anti-Collision Alarm System Based on Laser Range-FindingX. Qu and W.G. Zheng 1502
The Electromagnetic Control Air Pressure Brake Valve in the Research and Application ofVehicle Brake SystemH. Sun and Z.X. Guan 1506
Servo Motor Control System and Method of Auto-Detection of Types of Servo MotorsH.M. Zhang, L.S. Peh and Y.H. Wang 1510
An Improvement Geometric Error Identification Method of CNC Machine Tool Based onDouble Ball BarQ. Cheng, Z. Qi, K. Li, L.G. Cai and D. Lu 1516
A New Type Fatigue Machine Design with High Frequency Large StrokeP. Xu, H.Y. Liu, Y.T. Men, B.S. Xu, J. Lu and C.Q. Zhang 1522
Intelligent Remote Monitoring and Fault Diagnosis of Engineering Machinery SystemDesignH. Sun 1526
The Design of New Automatic Loading Control SystemG.B. Ding, Z.S. Huo, G.Y. Lu and R. Zhu 1531
Multi-Axis Spiral Tool Path Generation for Aviation Blade Numerical Control MachiningY. Cao, Z.J. Wang and Y. Bai 1535
Optimal Selection of Cutting Parameters in Blade NC Machining Based on BP NeuralNetwork and Genetic AlgorithmY. Cao, X.J. Dong and J. Du 1539
The Design of Breeding Cotton Growth Management System Based on MMSG.X. Li, J.W. Lu and F.L. Yin 1543
n Frontiers of Manufacturing and Design Science IV
Design and Implementation of the Airport Surface Surveillance System Based on GeoToolsJ. Li, G.Q. Wang and P. Zhu 1548
Research on the Technology of RFID Sliding SleeveL. Shi, X.J. Zhong, J. Wu and B. Li 1552
Optimal Control of Time-Varying Systems with Multiple Delays for Servo AppplicationsZ. Li and S.X. Ding 1556
Two Degree of Freedom Helmet Mounted Sight Testing SystemJ.F. He and Y.N. Wang 1560
Study on the Characteristics of the Automatic Tracking of Multiple Target TrackingJ.F. He, M. Ji, S. Cheng and Y.N. Wang 1564
Intrinsically Safe for Continuous Automated Production Safety Technology of UnitaryDetonating PowderF.J. Meng, L.H. Liu, L.G. Lai, F. He, Y.H. Zhang, Y. He and H.J. Chao 1568
A Pearl Automatic Sorting System Based on Image IdentificationZ.L. Bai, Q.R. Wen and M. Yang 1574
Development of Control System for MRS Groundwater Exploration Instrument Based onEthernetD. Wu, Q.M. Duan, T.Z. Huang, L. Zhang, Y.J. Han and J.W. Shi 1578
The Application of GA-RBF Neural Network Generalized Predictive Control Strategy inCirculating Fluidized Bed UnitY.B. Liu, H.J. Ling, J.H. Li, C.Y. Su and Z.Y. Yuan 1582
FPGA Implementation for CCD Driving and Laser Spot Position DetectionQ. Liu, X. Yang and Y.N. Mu 1587
Developing a Communication between Calibration Tool and Electronic Control Unit Basedon CCP ProtocolW.J. Wang, Y.M. Gong and Y. Ma 1591
The Design of Environmental Temperature and Humidity Remote Monitoring SystemBased on AT89S52 MCUH.X. Li and J.H. Zeng 1595
Remote Control Stepper Motor Based on the GPRSH.X. Li and J.H. Zeng 1603
Research and Design of Embedded Crane Video Transfer SystemJ.W. Leng and S. Dai 1609
Design and Application of Energy Monitoring System Based on Serial Port Server and B/SFramework ConfigurationJ.W. Leng and X.L. Fu 1613
A Design of Model and Algorithm of Intelligent Scheduling System in Enterprise RailwayShunting PlanB. Ge, J.H. Han, Z. Wei and L. Cheng 1617
The Research on Fault Diagnosis System of Shimmer Sight Based on Image AnalysisZ.L. Yu, H.F. Wu and Q. Song 1622
Water Monitoring System Based on ZigBee TechnologyJ. Ou, D.P. Yang and Y. Pei 1626
The MMVC for the Nth Order Linear Discrete-Time Systems under Prospective StrongInterventionQ.J. Wang and R.D. Gai 1630
Design and Application of Monitoring System of Remote Video and Environment to SmartSubstationsX.J. Li and Z.H. Chen 1634
Office Automation System Model on Workflow DesignQ.X. Chen and Y.Q. Liu 1638
Synchronous Issue of IR-Based Large Scale Volume Localization SystemY.F. Wu and G.Y. Li 1643
Intelligent Smoke Temperature Alarm System DesignY. Hong 1648
Research of the Misalignments Compensation in Optical Systems AlignmentY.J. Cao, J.Z. Shang, Z.R. Luo and T. Jiang 1652
Applied Mechanics and Materials Vols. 496-500 o
Study on Space Tether Retrieval Theory and Technology of Tethered CombinationL. Yi, Z. Guo and J.F. Guo 1659
Design of a Edubot-Micromouse Based on MCU+FPGAH.M. Zhang, L.S. Peh and Y.H. Wang 1664
Research on Simulation of Applying SVC and STATCOM to Power System in EnterprisesS.Y. Li and J.D. Huang 1670
Two Axes Micromouse PWM Generator Based on FPGAH.M. Zhang, L.S. Peh and Y.H. Wang 1674
Milling Tool Wear Identification Using Information FusionC.W. Xu 1681
Multi-Agent Based Active Noise Intelligent ControlH.F. Cui and N. Chen 1685
Design of Library Lighting Energy Saving System Based on Internet of ThingsG.Y. Yao and L. Song 1690
Design and Implementation of Remote Environment Surveillance System Based on GPRSJ. Zong and M. Wu 1694
Analyze a Feedback System with the R-H Stability CriterionY. Sun and W. Yan 1698
Wireless Warning System of Positive Pressure SCBA Based on GPRSH.B. Hu, J.S. Wang, H. He, G.H. Lin and Y.M. Zhang 1702
Design and Application of Low Power Wireless Temperature-Measuring System aboutWine FermentationS.Y. Sun, Z.Y. Wang, Y.N. Zhang and B.G. Xu 1707
Research on the Security Monitoring and Early Warning System of Oil Depot StationS. Wang, Y. Liu and Q.Z. Zhou 1711
Research on Real-Time Monitoring and Data Management of Hydraulic Test System Basedon LabVIEWX. Liu, Z.J. Zhang, S.Z. Li, X. Jin and G.Y. Zhang 1715
A Miniature Laser Processing System Based on xPC and Image ProcessingX.H. Zhang, H.D. Yu, Z.W. Sun, Z.J. Yu and B.Y. Chen 1720
The Power Optimization Control of Shearer Based on ANFISY.H. Zhou, H.W. Ma, H.Y. Wu and Y.J. Zhao 1727
Design of Optimized Controller for Fault Diagnosis of Three Phase Induction Motor UsingGenetic AlgorithmN. Rajeswaran, T. Madhu and M. Suryakalavathi 1732
Chapter 4: Information and Communication Technologies, Processingof Data and Signal
The Random Sampling Method for Gas Sensing Signal Based on Compressed SensingQ. Luo, B.H. Yang and D.M. Li 1739
Comparative Study on Sweat Fingerprints Photographic Effects between Full-Band CCDand UV Observing Photograph SystemsD.Q. Tao, T. Liu, Y. Dong, Y.J. He and B. Yang 1744
Research and Realization of ADO.NET Database Access TechnologyX. Zhou and Z.H. Zhuo 1748
The Development of Database System of Parameter and Coefficient for the CommonShafting PartsH.M. Fang and G. Zhao 1752
The Actual Fusion Technology Application in Automobile Service TeachingL.F. Yang 1757
Research on Improved Association Rules Algorithm for Web-Based Chinese Short TextsC.Y. Yu 1761
The Impact of Filter Function on Structural Topology OptimizationZ. Shang and Y.K. Sui 1766
p Frontiers of Manufacturing and Design Science IV
Application of C4.5 Algorithm in Evaluation of Railway Large Maintenance MachineryConstructionW.Q. Zhu and T.Y. Shi 1770
Design of a Manual Calculation System of Drawing Quantity with "Read Schemata”X.J. Wang 1774
A Fast Approach for SLCA in Keyword Query over XML DocumentL.Y. Wan 1779
GSPN-Based Modeling of Virtual Teams Building in Collaborative Process PlanningY.Y. Su, D. Liang and H. Dong 1783
Constraint Programming Method for Crew Schedule RecoveryB. Zhu, X.L. Cao, Y. Wang and Q. Gao 1788
Direction Finding Using Rotated Long Baseline InterferometerM. Zhang, F.C. Guo and Y.Y. Zhou 1792
A Prototype Hardware for Gas Sensor Arrays Data AcquisitionH. Zhang, B.H. Yang and D.M. Li 1796
Identification of Tool Based on Decision Fusion of Multi FeaturesJ.J. Wang, S.S. Zhang and W.P. He 1801
Extensive Particle Swarm Artificial Bee Colony Algorithm for Function OptimizationZ. Yuan, Y. Zhou, W.L. Zhong and L. Zhou 1808
Research of Cloud Storage and Improved Distributed Strategy of Data StorageH.X. Mao 1812
A Generalized BoVW Model for Content-Based Image RetrievalW.M. Xu, H. Yang, K.L. Fang and X.H. Liu 1817
Study on an Anti-Collision Algorithm of RFID Based on Binary Searching of BacktrackingM.L. Xu, L.J. Yu, C.M. Chen and S.Q. Cao 1821
Low-Power On-The-Fly Reconfigurable Iterative MIMO Detection and LDPC DecodingDesignE. Rohani, J.W. Xu, G. Choi and M. Lu 1825
Formation Model of Enterprise Information Capability Research Based on InformationBehaviorL. Xu and L. Zhou 1830
Near-Band IR Small Scene Star Image Segmentation Based on Partial Histogram GreyLevelZ. Wang, Z. Yan and W. Tan 1834
The Design of Digital Library Platform from the Perspective of Knowledge ManagementC.X. Wang and N. Liu 1840
Research on XML Data Structural-Integrity in XML SignatureH. Chen, N. Liu, B.L. Liu and M.T. Luo 1844
Communication Security on MASs - A Literature ReviewH. Chen, B. Sun and N. Liu 1849
Research on Horizon Detection Algorithm Based on Dark Channel Prior for ImagesCaptured by UAVB.B. Xu, J. Li, Z.Y. Guan, H. Yang and H. Zhang 1853
The Research and Application of USB Interface in the Design of FPGAX.P. Yin, Y. Li, W. Cheng and C. Chen 1857
Research on Classification of Privacy Protection Based on Improved Particle SwarmOptimization AlgorithmY. Chen, Y.X. Tang and Z. Zhou 1861
Research on Recommendation Algorithm in Social NetworksH.X. Tang and X. Qian 1865
Using Single Image Parallelepipeds for Camera CalibrationY. Tian, Z.W. Wang and F. Chen 1869
An Automatic Target Recognition Algorithm Based on Support Vector MachineH. Zhang, J. Li and B.B. Xu 1873
A XML Document Coding Schema Based on BinaryD.J. Gu and L.Y. Wan 1877
Design of FMCW Radar Data Acquisition and Signal Processing System Based on LabviewJ.W. Leng and C.B. Shan 1881
Applied Mechanics and Materials Vols. 496-500 q
Realization of 1024 Points Fast Fourier Transform Based on FPGA IPCoreJ.W. Leng and Q.Q. Xu 1885
Research on E-Commerce Intelligence Based on IOT and Big DataZ.L. Peng and Y.L. Huang 1889
Multi-Objective Particle Swarm Optimization with Comparison Scheme and New Pareto-Optimal Search StrategyW. Wang, W. Shen, C.L. Ying and X.Y. Yang 1895
Research on Computing the Covers of a Given ConceptC. Wang, X. Yu, C.M. Xu, D.D. He and L.J. Wang 1901
Research on Security and Reliability Technologies in Cloud StorageH.X. Mao 1905
Intrusion Response Mobile Firewall Design in Ad Hoc Networks and Based on SMPPerformance AnalysisX.Q. Di, H.M. Yang and J.Q. Li 1909
Bayesian MRF Modeling and Graph Cuts for Phase Unwrapping with Discontinuity PhaseFlawsA Comparative StudyF.G. Zeng, G.M. Wu, J.D. Mai and J.M. Chen 1915
Water Quality Data Analysis Based on Cluster AlgorithmJ. Ou and S.Q. Li 1919
Research on Water Monitoring System of Coal Mine Based on OntologyD.P. Yang, J. Ou and X.R. Guo 1923
LED Chip Electrode Positioning Based on Machine VisionX.Q. Yan 1927
Image Decomposition Based on a Modified Bidimensional Empirical Mode DecompositionMethodC. Wang 1931
Design of Intelligent Search Engine with Multiple AgentsH.Y. Jin 1937
Quantum Safety Control SystemC.H. Zhou and J.H. Guo 1941
Design of an Internet of Things Intelligent Basket SystemK.W. Huang 1944
Electronic Textbook: Concept, Functional Analysis and its Problem of ConstructionY. Luo and X.Q. Zhang 1948
A Flexible and Scalable Approach of Application DeploymentY.X. Li, Y. Peng, Y. Zhang and Z.L. Shao 1952
The Construction of Pay-for-Performance E-Commerce Trading PlatformC.P. Li 1956
Based Stochastic Particle Swarm Optimization and Random Simulation for SolvingStochastic Dependent-Chance ProgrammingN. Xiao 1960
A Hybrid Approach for Cases Classification of Medical DataX.Y. Chen, B. Liu and X. Xia 1965
Research on P2P Streaming Media Service System Based on Cross DomainL.F. Wang, M. Yan and Z.H. Han 1971
Design of Identification System Based on BCIJ.H. Yin, Z.D. Mu and J.F. Hu 1975
Tolerance Information Granules Used in EEG ClassificationZ.D. Mu, J.F. Hu and J.H. Yin 1979
Features Extraction Method of Motor Imagery EEG Based on Information GranulesJ.F. Hu, Z.D. Mu and J.H. Yin 1982
DCT-Based Digital Image SteganographyJ.M. Zhou, Y. Pan and R.E. Yang 1986
Research on Teaching Reform and Practice of University Computer Foundation CourseQ.L. Yang, L. Miao and W.B. Jiang 1991
Recognition Analysis of Wood Flour Mesh Number Based on External Rectangle FittingAlgorithmH.E. Ren, M. Liu and M. Zhu 1995
r Frontiers of Manufacturing and Design Science IV
Design of Secure Communication in SWSNL. Xu, J.Q. Zhou, Y. Qi, J. Hou and Q.M. Li 1999
Constructe a Hierarchical and Architecture of Cloud Computing FrameworksY.Q. Shi and Y.L. Zhu 2003
A New Network Selection Procedure Using Access Networks ConsentZ.Y. Liu 2007
A Schur-Type Factorization of Central Extended MatrixL. Yang and C.F. Xu 2011
The Application of BCI Technology in Android RPG GameJ.H. Yin, Z.D. Mu and J.F. Hu 2015
Research on Wireless Sensor Network Transmission SystemQ.X. Wu and J. Ou 2019
EEG Feature Extraction Based on Wavelet DecompositionJ.F. Hu, Z.D. Mu and J.H. Yin 2023
The Improvement and Evaluation of an Analog Digital Television System’s Availability andUsers ExperienceZ.J. Li, C. Yang and X.Y. Wu 2027
Searching Path for Delay Protection Services of Fiber Channel Based on Security and RiskEqualizationH.S. Gao and H.F. Wang 2034
Real-Time Bidding Based on MooTools without Refreshing PageL. Sun, Y. Zeng and H.M. Xing 2038
Interactive Consultation Based on MooTools Long Polling TechniquesL. Sun, H.M. Xing and Y. Zeng 2042
Research on Workflow Management Model Based on Ontology in Data CenterG. Chen 2045
The Application and Analysis of Chroma Keying by Using Adobe Ultra SoftwareL.H. Huang and B. Gui 2049
Another Kind of Crack on .NET ProgramsQ.E. Wu, W.S. Gao and W. Hu 2053
An Application Development Based on Android Platform The Design and Realization ofthe Mood Release SystemS.Z. Zhao, T. Zhang and X.N. Liu 2057
The Method of Calculate Exponential FunctionM. Ji and J.F. He 2061
Automatically Extracting University Scholar Names Information and ClassificationC. Su, W.Q. Jia and F.J. Shang 2065
Researches on Data Correctness and Completeness in Cloud Computing Based on GameTheoryY.H. Yu and L. Wu 2069
Automatic Target Segmentation and Tracking in Intelligent Video SurveillanceD.H. Yang, Y. Zhang and Y.P. Wang 2073
Application of Flash in the Analysis of Making Webpages and Mechanical MotionesH. Li, A.X. Yang, Y.Q. Zhao and Q. Wang 2078
A Study on Constructing On-line Seminar Based on the Mind MapN. Liu and C.X. Wang 2082
A Survey of Watermarking Algorithm Based on Edge DetectionS. Zhi, Y.N. Zhang, C. Yang and J.B. Liu 2086
The Design and Implementation of Infrared Communication SystemJ.M. Zhou, R.E. Yang and X.Y. Ni 2091
Research on Delay-Tolerant Network and Increasing Probability of OpportunisticCommunicationH.Q. Liu, S.W. Zhao and J. Shang 2095
Sparse Line-Optical Flow Field Computing Method Based on Lines MatchingZ.Y. Guan, J. Li and H. Yang 2099
Design and Research on Data Warehouse of Insurance IndustryJ.H. Zhang, L. Lei, X.Y. Cui, Y. Wu and L.T. Li 2108
Applied Mechanics and Materials Vols. 496-500 s
The Research and Construction of National Grid ERP Knowledge Management SystemQ. Wang 2112
ITS Platform Research Based on Cloud ComputingA. Wang and B. Gui 2117
The Application Study on Choosing Course System Based on JBoss Cache of DistributedCache TechnologyH.W. Mo 2121
Based on the User's Network Management Software ResearchY. Zhao 2127
Face Recognition Based on Semiconductor NeurocomputerY. Huang 2130
Network Topology Discovery Algorithm Based on MIBH. He, C.X. Li and C.Y. Gong 2134
Research on China's Web Accessibility to the Visually ImpairedQ. Huang, W. Luo and H.C. Xia 2138
UTSE: A Game Engine-Based Simulation Environemnt for AgentJ.W. Hu, C. Feng, Y. Liu and R.Y. Zhu 2142
The Study of Intelligent Learning WebsiteS.D. Li, Y.X. Li, J.W. Deng and K.Y. Deng 2146
Research of AForge.NET in Motion Video DetectionC.Y. Gong and H. He 2150
Study on Measuring Methods of Self-Physical Simulation to Radar PerformanceQ. Sun, Y. Sun and G.A. Zhou 2154
The Application of Dyadic Wavelets Transform Modulus Maximum in the Seismic SignalDe-NoisingY.Y. Wang and F.X. Wang 2158
Research of Computer Network Information Security and Protection StrategyZ. Lu, Z. Xiong and K.Q. Tu 2162
Research on the Location of Parallel Line Labeling Based on Water System of LineLandmarksX.Y. Yang 2166
Assessment Model and Method Research of Information Security RiskZ. Lu, Z. Xiong and K.Q. Tu 2170
Community Detection in Social NetworksC. Su, Y.K. Wang and Y. Yu 2174
Discussion on Preprocessing Technique of Geophysical Logging DataH.P. Yu and H. Wu 2178
Research on Medical Information Cross-Regional Integration SchemeY. Sun, J. Chen and J. Song 2182
Design and Implementation of Broadcasting and Television Program Monitoring SystemX. Qi and J.P. Chai 2188
The Development of WEB Platform-Based on New Rural Social Endowment Insurance ofManagement Information SystemH. Wang and P.J. Dai 2192
On the Application of Digital Video Watermarking TechnologyY. Wang 2196
Rate Allocation Algorithm with Successive Refinement in Peer-to-Peer NetworksY. Su and M. Lu 2200
Hardware Design of UHF RFID Reader for the Internet of ThingsL. Zhang, L.B. Jin and J.B. Liu 2204
Current Status and Development Trend of Research of Computer ForensicZ.Y. Fu and Z.Z. Zhao 2208
Infinitely many Solutions of Semi-Linear Elliptic Equation with a Logarithmic NonlinearTermY. Li and J. Qin 2216
Operating Mechanism of Teaching Quality Information SystemP. Li 2220
t Frontiers of Manufacturing and Design Science IV
Design of Polytechnic College Practice Training Base Management System Based onInternet of ThingsZ. Zhang and C. Cheng 2224
Using One-Dimensional Linear Interpolation Method to Check Over-Fitting in NeuralNetwork with Multi-Dimensional InputsB.L. Hung and H.A. Hung 2228
Schur Factorization for Unitary Extended MatrixL. Yang 2233
Image Tamper Blind Detection Based on CFAD.S. Ji, R.Y. Yang, T. Cao, Y.K. Yao and X.Y. Chen 2237
A New Automatic Seamless Image Stitching Algorithm Based on the Gray Value of EdgesJ.L. Cao, L. Xu, S.S. Guo and D.X. Ding 2241
A Simplified Integration for Heterogeneous Database Application SystemC.Q. Li, G. Zhao, W.Y. Chai and L.N. Chen 2246
Information Granule Reduction and Cluster Based Partial Least Squares Applied in EEGSignalsZ.D. Mu, J.F. Hu and J.H. Yin 2256
Based on Data Mining Technology in Distance Education System Applied ResearchP. Li 2260
College Campus Network Management Information System Research and ImplementationP. Li 2265
High-Speed Architectures for Parallel BCH DecodersW. Liu and L.F. Zhao 2269
The Research of Excel File Fragmentation Data RecoveryZ.Z. Zhao and Z.Y. Fu 2274
Realization of Communication Control for Bill Acceptor Based on Java TechnologyZ.Y. He and Z.F. He 2279
Extension and Update for Meteorological MetadataQ.J. Yang, F. Li and X.Y. Chen 2283
On Ethernet Applications in the Field of Vehicle NetworkY.D. Chi, D. Yuan and X.T. Yang 2287
Research on Advanced Algorithm of Angle Bisector Line Landmarks LabelingX.Y. Yang 2291
A XML Information Integration Model Based on OntologyD.J. Gu and L.Y. Wan 2295
Experimental Study of FPCA on its Generalization Performance in Image ClassificationK.W. Huang 2299
Decision on Function of One Simple Separable Relation for the Minimal Covering of P*K
Y.Z. Liu, X.B. Liu and X.F. Zhang 2303
Optimization of SVM Method with RBF KernelC. Wang 2306
The Study of the Workflow Process Model in OA SystemQ.X. Chen and Y.Q. Liu 2311
Integrated Process Planning Method for 3D Designing EnvironmentH. Chen and X.T. Du 2316
Research of Active Knowledge Aided System in the Bearing DesignX.A. Zhang, J.X. Li and H.F. Cui 2320
3D CAD Model Retrieval Based on Oriented Bounding Box and Normals DistributionQ. Chen and Y.M. Yu 2324
The Introduction to MooTools ArchitectureL. Sun, H.M. Xing and Y. Zeng 2328
Loss-and-Noise Tolerant Single-Shot Quantum Coin FlippingS.B. Huang, S. Zhang, J.B. Chen, D.Y. Ji, J. Liu and W. Ye 2332
Design of the Small World Model by NS2J. Shang, H.Q. Liu, Q. Liu and Z.Q. Liu 2338
Research on Equipment Maintenance Support System Based on B/S StructureL. Lei, J.H. Zhang, L.T. Li, W. Peng and Y. Wu 2342
Applied Mechanics and Materials Vols. 496-500 u
Study on Automatic Diagnosis of Remote Support for Equipment FaultX.D. Cheng, L. Lei, J.H. Zhang, S.C. Chen and W. Peng 2346
Research on CHAID Algorithm Application in Mobile Population Management FieldW. Dong, S. Qiao and Q.R. Wu 2350
Construction and Enumeration of Steiner Triple Systems with Order VZ.D. Xu, X.Y. Li and W.X. Chou 2355
Research on the Architecture of Shaanxi IoT Industry ChainX.X. Yang and J.J. Li 2359
Methods of Constructing and Enumerating the Spanning Tree of a Connected GraphZ.D. Xu, X.Y. Li and W.X. Chou 2363
Chapter 5: Materials and Technologies in Construction
Mechanical Performances of Aluminum Cellular Metal with Kelvin and Cubic StructureX.B. Dang, K. He, J.H. Li, W. Feng and R.X. Du 2369
A Monitoring Method for Transmission Tower Vibration Based on Fiber Grating SensorTechnologyX.Z. Zheng, F.Y. Meng, X.H. Shen, J.W. Dong and D.F. Ma 2375
A Resistance Model of Carbon Fiber Composite Materials Based on Interfacial EffectJ. Wu and A.Q. Xu 2379
Cellular Concretes Based on Nanostructured Perlite BinderN.V. Pavlenko, V.V. Strokova, A.V. Cherevatova, D.D. Netsvet and E.V. Miroshnikov 2383
Unbonded Prestressed Concrete Design Characteristics and Construction TechnologyP. Pang 2387
Green-Wall Materials in New Rural Construction ProjectsJ. Chen and T.B. Wei 2390
Test Research on Influence of Water and Mineral Composition on Physical and MechanicalProperties of PhylliteX.Z. Li, G.F. Wang and L. Cao 2398
Experimental Study on Mechanical Properties of Synthetic Macro-Fiber ReinforcedReactive Powder ConcreteK. He, H. Yang, F.F. Jia, E.P. Wang, Z.B. Lu, J.Y. Liu, X.L. Liu and Q.X. Dong 2402
Research of Waste Recycling Natural Fiber Materials at Green RoofC.C. Chen and C.C. Lee 2407
Test Study on Interface Properties between Different Geogrids and ClayX.F. Zhu, J.Y. Wei, B.T. Wang and Y.L. Zhang 2411
Application of Wood-Plastic Composites in Exhibition DesignY. Lei and L. Li 2416
The Analysis of Prestressed Short FRP Confined Columns under the Action of EccentricLoadJ.D. Zhan, Y.J. Wu, X.Y. Zhou and X.G. Chen 2421
The Influences of Different Temperature Histories on the Assessment of CrackingResistance Based on the Concrete Thermal Stress TestX.F. Song, Y.F. Wang and C. Li 2426
Electromagnetic Wave Absorption Properties of Cement Filled with Carbon BlackY.F. Zhang, W.J. Hao, Y.P. Duan and S.H. Liu 2431
Based on the Urban Waterfront Landscape Image of the Waterfront Place DesignF. Jiang and Y.N. Zheng 2435
Study on the Rutting Test Using Cylinder Specimen with Flexible ConstraintC.H. Zhao, X.L. Zhu, Y.P. Li, Y. Pan and R. Gao 2439
Welding Residual Stress Evaluation of Complex Welded Joints by Brinell Hardness MethodQ. Zeng, D.Q. Tao, Z. Zhou and X.Q. Li 2444
Greenway Construction in Shunde DistrictY.N. Zheng and F. Jiang 2452
Theoretical Calculation of the Strength of the Mass ConcreteW. Li, D.C. Wu, X.G. Chen and J.T. Hou 2456
v Frontiers of Manufacturing and Design Science IV
Seismic Performance Research of Viscous Dampers under Different ArrangementT.F. Zhong, B. Yu and G.Q. Wu 2461
Vibration Serviceability Assessment of a Residential BuildingJ.Y. Lei, C. Lian and D.G. Luo 2465
Comparison of One-Way Shearing Test between Coarse-Grained Soils and ReinforcedEarthG.D. Deng, J.S. Zhang, X. Shi, F. Meng, L.L. Song and X.F. Cao 2469
Secondary Moment Distribution of Prestressed Concrete SlabP. Pang 2474
Emergency Response and Control Technology for Landslides in Northern FujianD.L. Zhu and H.G. Li 2478
Compressive Strength Tests of Recycled Green Concrete Containing Ground GranulatedBlast-Furnace SlagJ.G. Sun and Y.L. Gu 2486
Stability Analysis of Surrounding Rocks and Initial Support Structure in Phyllite TunnelConstruction ProcessX.Z. Li, G.F. Wang and Z.R. Zhu 2491
Investigation and Analysis of Seismic Safety of Farmhouses in the Tanlu Fault ZoneJ. Zhang, Y.H. Wang and R.Q. Xie 2495
Prestressed Concrete Beam Bridge Design and Main Parameters of Prestressed Steel BeamCalculations and ArrangementX.J. Yin 2501
Research on the Application of Radial Basis Function Neural Network to StructuralReliability Analysis of Gravity DamY. Ji, X.Q. Liu, T.C. Li and S. Li 2505
Analysis on Ground Vibration Induced by Subway under Three Track StructuresD.M. Shen, L.D. Zhang, J.H. Xia and S.T. Xue 2511
Prestressed Concrete Continuous Beam Bridge Span Arrangement and Structure SizeProposed AnalyticalC.H. Dong 2516
Analysis of Factors Affecting Stability of TunnelX.Z. Li, J. Liu and X.L. Li 2520
The Practical Application of Building Information Modeling in the Construction Phase ofthe Building Life CycleY.M. Su and C.Y. Lan 2523
Application Study of Green Building Technology of Townlet under Rural-UrbanIntegrationY.S. Huang and J.K. Tan 2529
Experimental Research on Physical and Mechanical Properties of High-Speed RailwaySubgrade FillerX. Shi, J.S. Zhang, G.D. Deng and F. Meng 2533
The Relationship between Taiwan Green Buildings, Humanity and AestheticsY.M. Su and C.H. Lin 2538
The Importance of the Appearance Image and Cognition of Green BuildingY.M. Su and Y.P. Tsai 2544
The Types of the Components of the Stores' Facades in City Centre - By Comparisonbetween Nanjing City (China) and Fukuoka City (Japan)Q. Shen, Z.H. Liu and Z.L. Yang 2549
Economic Comparison for the Protection Scheme of Ancient Building Based on BIMR. Wang, X. Zhang and T.T. Han 2553
The Study on Digital Fabrication System in the Construction ProcessS. Liang, M. Gao, S.J. Wang and L.Z. Zhang 2557
Technical Analysis of Optimal Design for Building Structure Considering Cost Constraintof ProjectY.E. Hao and Y.Q. Lan 2563
The Field Office Survey for Lighting Environment in TaiwanY.S. Lin, T. Koga, K. Hirate and Y.C. Kuo 2569
All Steel Structure Portal Frame Light Building Structure DesignS.J. Zhang 2575
Applied Mechanics and Materials Vols. 496-500 w
Empirical Study on Highway Subgrade Construction Scheme DesignX.Y. Zhang 2578
Study on the Design of SMA Mixture on ExpresswayJ.P. Xu and F.M. Liu 2582
Chapter 6: Product Design and Engineering Management
Study the Structured Approach to Improve Manufacturing Configuration before DesignReadinessH. Chen and J.J. Shi 2589
The Research on Rapid Design and Manufacture Method for Letters Product Based on RPTechnologyS. Zhao, D.Q. Zhang and N. Hu 2594
Application of Integrated Concept in Industries for Maximizing Energy Saving PotentialY.R. Dai and J. Wang 2598
Study on Design of Huxiang Smoked Bamboo FurnitureJ. Zhao, Z. Li, P. Zhao and Z.F. Zhang 2603
Fengxiang Clay Sculpture in the Design of the Product of Contemporary OpportunityY. Zhang, L.L. Chen and M.C. Wang 2607
Key Technologies of Rapid Modeling for Additive ManufacturingZ.W. Liu and H.Y. Zhang 2611
Campus Souvenirs Design Research Based on Emotional NeedsX.X. Liu, L. Gan and H.P. Zhao 2616
The New Model Research of Product Design Services Based on Cloud ComputingX. Liu, S.H. Yu, M.L. Zhao and G.C. Liu 2621
Analysis of Apple’s Design Management PolicyH.N. Pei, S.H. Yu and B.Z. Tian 2626
A Study on Introduced Visual Design Elements Applied to the Product Packaging DesignC.C. Shen 2630
Flow-Oriented Collaborative Process Planning SystemY.Y. Su, D. Liang and H. Dong 2634
Intention Bionic Principle of Automotive Body Shape DesignL.M. Fu and H.Y. Yu 2638
Virtual Prototype Modeling and Simulation of Remote Controlled Weapon StationJ.H. Tang 2643
Customized CAD System Design Based on GMDH Method for Racing BikesX.Q. Cheng, H.Y. Liu, C.L. Yang and J.H. Wang 2647
Bus Body Design and Calculation of Aerodynamic Drag CoefficientC.K. Liu and J. Wang 2655
Application Study of the Virtual Freeform in Product Development DesignR.B. Hu, X.Y. Suo, K.Q. Wang, R.P. Xu and Z. Gao 2660
A Study of Application of Upholstered Furniture DesignZ. Gao, X.Y. Suo and R.B. Hu 2665
Analysis on Site Design of Road Landscaping in GuangDongY.N. Zheng and F. Jiang 2669
Adaptable Design Methodology of Heavy Duty Machine Tool for Green RemanufacturingL.G. Cai, K. Li, Q. Cheng, Z. Qi and P.H. Gu 2672
The Innovative Product Design of the Superhighway Speed CardR.L. Lin 2679
A Study of the Innovative Design of Picture Book Creation Using Mixed MediaR.L. Lin 2683
The Effect of 3D Printing Technology on the Future Fashion Design and ManufacturingB.Z. Wang and Y. Chen 2687
Spreading the Culture of a Sustainable Manufacturing of Eco-Fashion Products. Focus onInternational Brands that make the Synergy between Fashion Design and Sustainabilitytheir SuccessC. Ceppa 2692
x Frontiers of Manufacturing and Design Science IV
Research on Evaluation of Collaborative Development Organization for ComplexProduction SystemE.Q. Zhang and M. Li 2697
Based on the Multifunctional Treadmill Structure of Human Body Engineering DesignM.H. Sun 2703
Proposal of Eco Design for Chinese ManufacturingM. Sun, Y. Ru, C.X. Li and Y.C. Sun 2707
Exploring Industrial Design with the View of Ecological NatureL. Chen, Y.F. Cao and X.S. Zhang 2711
Research on the Color of Anchor Handling Towing Supply VesselX.X. Liu, W.S. Li, X. Li, C.M. Huang and Q.Y. Liu 2715
Wind, Thermal and Hydropower Joint Operation Benefit Analyzes Based on the Life CycleManagementZ.F. Tan, L. Sun, H.H. Li, L.W. Ju and Z.H. Chen 2720
Based on Reliability Importance Measures Method of Comprehensive Evaluation of ElectricPower Communication EquipmentH.S. Gao, X.P. Qiao and H.F. Wang 2725
Connector Structure-Based Modeling of Assembly Sequence PlanningY.Y. Su, D. Liang and H. Dong 2729
Risk Assessment of Cascading Failures in Power System Based on Fuzzy TheoryF.C. Zhang and J.D. Huang 2733
A Non-Probabilistic Model for Structural Reliability AnalysisX.Z. Qiao and Y.Y. Qiu 2737
Research on Brittle Source of Airline NetworkJ. Du, J.F. Zhu, W.W. Wu and S.Z. Xu 2742
Individual Design of Mechanical and Electrical Products Based on Reverse EngineeringZ.Q. Wu and T.J. Wu 2746
A Model of the Driving Fault Tolerance of Traffic Management and Control Facilities atUrban IntersectionsM.R. Chen, Y.L. Pei and L.W. Hu 2751
Consideration of Planning a Mobile Hybrid Operating RoomX.G. Zhao, X.X. Xu, F. Niu, Z.G. Liu, H.J. Wang and X.D. Ren 2756
The Impact of Initial Allocation of Carbon Emission Rights on Power GenerationReplacement Analysis ModelZ.F. Tan, T. Lei, H.H. Li, L.W. Ju and Z.H. Chen 2760
A Study on Semantic Design of SpeakersJ. Han, P. Peng and X.W. Li 2764
Evaluation on Comprehensive Protective of Protective Engineering Based on Input-OutputDEA Model of Two GoalsJ.Y. Liu, H.X. Wang, L. Li and C.Q. Fu 2768
A Model for Management of Large-Area Crop RotationL. Sun and Z.S. Zhu 2775
Risk Analysis of Marine Riser Based on Improved Fuzzy AHP MethodS.R. Yu and X. Liu 2779
Evolutionary Game Analysis of the Cooperation Motives of Mobile Operators and FinancialInstitutions in the Near Field Communication Mobile Payment IndustryM.H. Wei and S.L. Tang 2784
Application of the Fuzzy-AHP Method in Bridge Crane Safety EvaluationG. Shen, D. Xiang, N. Liu, P. Mou and Y. Yang 2788
Shaanxi-Shehuo-Mashao-Mask-Based Office Supplies Design StudiesM. Xiao, L.L. Chen and X.P. Wang 2795
A Study of the Design Aesthetics of Picture Book Creation Using Mixed MediaR.L. Lin 2799
A Design Science Study of Picture Book Creation with Mixed MediaR.L. Lin 2803
A System of Systems Approach to Supply Chain DesignE. Mastrocinque, B. Yuce, A. Lambiase and M.S. Packianather 2807
Applied Mechanics and Materials Vols. 496-500 y
Data Acquisition and Quality Assurance Integration Platform Based on DPMJ. Wang, W.P. He, Y.L. He, X.S. Li and G.F. Guo 2815
Forecast on China's New Energy Vehicle Market DemandJ. Shi, B. Liu, Y.H. Huang and H.L. Hou 2822
Study on Information Asymmetry and the Risks Initiated by it in the Supply Chain FinanceG.F. Qiu, Y. Zhang and C. Wang 2827
A Study on the Future Development Trend of Virtual Clay TechnologyX.Y. Suo, R.B. Hu and R.P. Xu 2832
Application of BIM in Project ManagementK.W. Huang 2836
Postal Universal Service Fund Collection Study from the Express Industry in theInformation AgeJ.T. Han and C.H. Yuan 2840
Power System Cascading Failure Risk Assessment Model Based on Graph TheoryF.C. Zhang and J.D. Huang 2844
Enterprise's Brand and Products Shape-Designing DNAY.S. Li 2848
The Solution of an Integer Problem Based on Geometric MethodJ.M. Zhou, J.R. Guo, R.E. Yang and W.H. Li 2852
A Research Review of Project Risk Assessment MethodsZ.C. Chen, L. Yao and J.J. Yang 2857
Preliminary Hazard Analysis on Fire and Explosion Hazard of Stevedoring Process in LNGTerminalF. Qu, X. Wang and Z. Zuo 2863
Analyzing and Constructing the Operation Mechanism of Industry Technology AllianceH.B. Cong 2867
The Empirical Analysis of Small and Medium Sized Pharmaceutical Enterprises OperatingPerformance and Debt Source StructureJ.J. Li 2872
Analysis of the Daily Management Classes ProblemsJ. Li 2876
The Effective Management of Chinese Enterprise Procurement through ResearchM.L. Tian 2880
Evolution of Innovation Cooperation Networks in the Marine IndustryF.X. Qiu 2884
Research of the Office Chair Coding Technology Based on PDMZ.H. Tang, W.J. Liu and G.Q. Zhang 2888
Chapter 7: Urban Planning, Transportation and Environment
The Study of the Relationship among Airline Network Profit, the Total Numbers of Nodeand Airline Passenger FlowS.Z. Xu, J.F. Zhu, Y.H. Wang and J. Du 2895
Research on the Terminal Aircraft Separations Based on the History Surveillance DataZ.H. Xia, W.J. Pan, R. Kang and X.L. Luo 2899
Study on the Construction of Yichang River Cruise HomeportJ. Wang 2904
Landscape Ecology Design in Development ZoneF. Jiang and Y.N. Zheng 2908
Optimizing Method of Express Delivery Network and Vehicle Routes Based on AutomaticParcel MachineY.M. Qin, H.J. Mao and Y.H. Li 2912
Evaluating Public Perception for Environmental Attributes of the Zengcheng Greenway(Guangzhou)J.Y. Wu 2917
Research of Planting Different Species on Cooling EffectivenessC.C. Chen and C.C. Lee 2921
z Frontiers of Manufacturing and Design Science IV
Study on Community Residential Space with Block Unit Mixed Community Theory inRapid Urbanization Region: Taking Xi'an Changning Newtown Community Planning as anExampleQ.H. Hou and C. Liu 2925
The Investigation and Analysis of Environmental Geological Problems in Coal Mines inYulin CityB. Tang and X.G. Zhao 2933
Flow Comparison of the Traffic Model Based on Safe DrivingW.J. Pan and C.Y. Huang 2937
Research on Flight Delay Based on Adaptive Agent DigraphJ. Du, J.F. Zhu, W.W. Wu and S.Z. Xu 2942
Design and Simulation of Improved One-Dimensional Cellular Automaton ModelR. Kang and K. Yang 2946
Time-Space Research of the Two Safety Deceleration ModelsW.J. Pan and N. Lu 2950
Inactivation of Bioaerosol in Indoor Air by DC Corona DischargeY. Kang, H.C. Ying, W.W. Shao and Z.C. Wu 2955
Risk-Based Approaches for the Remediation of a UST Site: A Case StudyB.R. Lien, W.H. Huang, Y.T. Sheu, S.L. Lin and C.M. Kao 2959
The Influence of Airline Network Passenger Flow, Fares on Airline Network ProfitS.Z. Xu, J.F. Zhu and J. Du 2963
Urban Forms is Changing from Transport and Land UseC.N. Li, K.C. Hsu, C.W. Lo and Y.K. Hsieh 2967
A Method to Create the Traffic Accident Scene Graphic Based on Electronic Maps andInformation Acquisition DeviceW.J. Liu, S. Su, F.P. Wang, K. Li and Z.Y. Yin 2971
Computing Hybrid Rotation Period of Cotton-Rice and Cotton-OthersL. Sun and Z.S. Zhu 2975
Analysis of Urban Greening Maintenance and Management in the Shunde DistrictF. Jiang and Y.N. Zheng 2979
Research on Apparent Viscosity Behavior of Municipal SludgeS.H. Zhao, B. Lou, W. Qian and X.F. Long 2984
Research on Reliability of Urban Agglomeration Transport System after a DisasterZ.M. Wei, X.L. Zou, M. Li, W. Li and C.B. Li 2989
National Highway Video Surveillance Networking PlatformP.Y. Gao, J. Wang and M.H. Zhu 2996
Study on Ecological Restoration of Abolished Strip Mine of Hulunbuir GrasslandW.B. Guo, T.K. Liu and J.D. Wang 3000
Species Composition and Succession Discipline on Lava Flow of Different Periods Volcano,Wudalianchi ChinaQ.Y. Huang, J.F. Wang, D.G. Zhu and H.W. Ni 3005
An Area Growth Model of Eichhornia Crassipes with Application to Lake EcosystemRestorationL. Sun and Z.S. Zhu 3009
The Effects of Safety Deceleration Rule in Traffic SystemK. Yang 3013
Effect of Diagenesis on the Formation Effective Reservoirs in Volcanic Rocks of XujiaweiziFaulted-SagZ.J. Li, Y. Zhang and X.M. Wang 3017
Traffic Flow Turbulence Characteristics Research Based on the Cellular Automaton ModelZ.P. Huang, L. Cheng and W.H. Zhang 3022
Crop Water Production Function of Processing Tomato (Solanum lycopersicum) underRegulated Deficit IrrigationH.J. Zhang, A.C. Wen and J.D. Zhang 3026
Comparison of Different Means to Determine Postcrash Velocity in a Real-World Vehicle-Pedestrian AccidentS. Su, W.J. Liu, F.P. Wang, K. Li and Z.Y. Yin 3031