t-type 1w mr11gz4.0ez10 v1.0 - ersatzteil-land.de...the led bulb is compatible with magnetic...
TRANSCRIPT
Beautiful Light Technology Corp,. Green Technology of Lightings
DATA SHEET T-type Series 1X1.1W / 1X1.3W (1.5W / 1.7W) MR11
GZ4.0 EZ10 LED Lamps
2009 Beautiful Light Tech ., T-type Series MR11 LED Lamps ( BLT11XXXX-XX1L Rev:01 010409)
2
Beautiful Light Technology Corp,.
CONTENTS
`
Instruction.………………………………………………….3Specification.……………………………………………….4Typical Illumination ……………………………..................4Electrical / Environmental Characteristics………………..4Polar and Cartesian Diagram……………………………...5~7Mechanical Dimension …………………………………….8Product Packing Type ………………………………………9Fixture Compatibility………………………………………..10Transformer Compatibility……………………………….....10Ordering Number…………………………………………….11Product Warranty .………………………………………….12Safety & Environment Specifications……………………..12Life, Reliability and Lumen Maintenance…………………12Replacement with Halogen / Incandescent………………13
3
Beautiful Light Technology Corp,.
T-Type Series MR11 LED Lamps
B.L.T.C. T-type Series MR11 G4.0/EZ10 LED lamp was integrated with the most advance LED source and assembled with our key components of drivers (power), thermal and optics, T-type MR11 provides the quantity and quality of light produced by traditional halogen lamp.
LED source- Energy Saving, Trusty Life & Truth Color
All B.L.T.C. LED light source were manufactured by leading LED companies such as, Nichia, Cree and Lumileds. All LED source which B.L.T.C. collected is not less than 80lm/W and truth color, C.R.I +75. This is the main reason B.L.T.C. LED bulbs are providing highest performance in Life, Luminous Intensity, C.R.I and reliability.
Driving source- Energy Saving, Life, Reliability & Safety,
B.L.T.C. is a professional company to design drivers and controller. To meet the life standard of LED and produce the most energy saving lamp source, all integrated drivers for B.L.T.C bulbs reach power efficiency 75~85%, components life >50K hrs under 80˚ centigrade. All of our design conformed to the EMI and safety principle in most of advanced countries.
Optics Source- Lighting Application
B.L.T.C. produced LED lamp based on various kind of optical design. There is fruitful design in optics to meet all lighting application such as track light, general architectural, landscape lighting, display case fixtures, cabinet lighting and OEM lighting for different industries.
Thermal- Life, Reliability
A good thermal management for a LED lamp source was consisted by different factors including LED emitting efficiency, drivers efficiency, thermal design and materials characteristic. B.L.T.C. is a leading company to improve above factors and create most reasonable components for lamp assembling. Features:
- High C.R.I. >75 - Dimmable - Long life, min 20Khrs up to 50K hrs - Various beam angle: 2θ1/2° (15 ,40 ,88 )∘ ∘ ∘ Degrees - Replacement with 10-15 W Halogen - Energy Saving, Total power consumption up to 1.6Watt - No UV or IR - RoHS Compliant
4
Beautiful Light Technology Corp,.
PART NUMBER LED
TYPE COLOR TEMP.
C.R.I./
MIN.
INPUT
VOLTAGE.
POWER
CONSUMPTION
BEAM ANGLE
2θ 1/2°
LUMINOUS
FLUX (LED)
LUMINOUS
FLUX (Lamp)LAMP
HOLDER
BLT11XXN25-NX1X
4700K ~5700K
2500K ~3200K 85 / 70
12 V
AC / DC 1.5W 15
90 /
70
57 /
46
GZ4.0
EZ10
BLT11XXS40-NX1X
4700K ~5700K
2500K ~3200K 85 / 70
12 V
AC / DC 1.5W 40
90 /
70
65 /
52
GZ4.0
EZ10
BLT11XXD120-NX1X
4700K ~5700K
2500K ~3200K 85 / 70
12 V
AC / DC 1.5W 88
90 /
70
70 /
56
GZ4.0
EZ10
BLT11XXN25-CX1X
5000K~6500K
2500K~3200K 85 / 80
12 V
AC / DC 1.7W 15
100 /
80
57 /
46
GZ4.0
EZ10
BLT11XXS40-CX1X
5000K~6500K
2500K~3200K 85 / 80
12 V
AC / DC 1.7W 40
100 /
80
65 /
52
GZ4.0
EZ10
BLT11XXD120-CX1X
5000K~6500K
2500K~3200K 85 / 80
12 V
AC / DC 1.7W 88
100 /
80
70 /
56
GZ4.0
EZ10
Part Number Color Beam angle
2θ 1/2°
Candela
cd/klm
Illumination( Lux ) / Spot Diameter
30cm 50cm 100cm 150cm 200cm 250cm 280cm
BLT11XXN25-XW1L
Cool
White 15 410 4260 1620 410 180 97 64 51
BLT11XXS40-XW1L
Cool
White 40 113 1115 401 113.3 45.1 25 16.5 13
BLT11XXD120-XW1L
Cool
White 88 76.5 721 262.7 76.5 25.3 16.6 8.1 6.2
BLT11XXN25-XWW1L
Warm
White 15 328 3408 1296 328 144 72.8 51.2 40.8
BLT11XXS40-XWW1L
Warm
White 40 83 892 320 82.6 36 20 13.2 10.8
BLT11XXD120-XWW1L
Warm
White 88 57.2 360 205.3 57.2 20.2 14.9 6.9 5.3
Part No. IF Input Voltage Working VoltageLED Power
Consumption Total Power
Consumption Operating Temperature
BLT11XXXX-XX1L 12VDC 8~16V 1.3W 1.6W -20˚~+40˚C 12VAC 8~16V 1.2W 1.8W -20˚~+40˚C
Specification
Typical Illumination Characteristic- 1X1.1W / 1X1.3W Lamp
Electrical / Environmental Characteristics
5
Beautiful Light Technology Corp,.
Polar & Cartesian Diagram
1. Polar Diagram 2. Cartesian Diagram
BLT11XXN25-XW1L BLT11XXN25-XWW1L
0.5 M
1 M
1.5 M
2 M
2.5 M
410 LUX 320 LUX
180 LUX 144 LUX
97 LUX 40.8 LUX
64 LUX 51.2 LUX
51 LUX 40.8 LUX
6
Beautiful Light Technology Corp,.
1. Polar Diagram 2. Cartesian Diagram
BLT11XXS40-XW1L BLT11XXS40-XWW1L
0.5 M
1 M
1.5 M
2 M
2.5 M
113.3 LUX 82.6 LUX
45.1 LUX 36 LUX
25 LUX 20 LUX
16.5 LUX 13.2 LUX
13 LUX 10.8 LUX
7
Beautiful Light Technology Corp,.
1. Polar Diagram 2. Cartesian Diagram
BLT11XXD120-XW1L BLT11XXD120-XWW1L
0.5 M
1 M
1.5 M
2 M
2.5 M
262.7 LUX 205.3 LUX
76.5 LUX 57.2 LUX
25.3 LUX 20.2 LUX
16.6 LUX 14.9 LUX
8.1 LUX 6.9 LUX
8
Beautiful Light Technology Corp,.
Mechanical Dimension (mm) N25, S40, D120 GZ4.0 ,EZ10
9
Beautiful Light Technology Corp,.
Product Packing Type
10
Beautiful Light Technology Corp,.
Fixture Compatibility
The T-type series MR11 G4.0 or EZ10 is not compatible with all MR11 fixtures. Before installation, please read following guidelines:
-T-type series MR11 can not be installed in sealed fixtures. -T-type series MR11 can not be installed in outdoor fixtures. -T-type series MR11 is not designed for use in wet environment. -T-type series MR11 is not compatible with fixtures which have integrated electric type AC transformers. -T-type series MR11 can not install in a fixture which an integral primary optics to focus the light.
Transformer Compatibility
Two Types of low-voltage transformers are used with traditional Halogen lamps; magnetic AC12V and electronic AC12V. Consider the following when selecting transformers for use with MR11 LED. - AC12V Magnetic Transformer:
The LED bulb is compatible with magnetic transformers used with 12V halogens; however, magnetic transformers are heavier, less efficient, and make noise. Under 12V AC condition, T-type series MR11 LED can only present 90% lighting comparing the condition under 12V DC. - AC12V Electronic Transformer:
The LED bulb is not compatible with electronic transformers or electronic-magnetic AC12V due to the output section of this kind of transformers are not stable. Besides, some electronic transformers require a minimum load higher than 5~10Watt in order to work properly. - Symptoms of incompatibility include: no light output, flickering, strobe and randomly shutdown. - DC12V Power Supply:
T-type MR11 can perform highest brightness and power efficiency under DC 12V power supply. - DC Constant current driver:
T-type MR11 can also perform high efficiency with constant current driver which is greater than 8V DC of output section.
11
Beautiful Light Technology Corp,.
Ordering Number for T-type series MR11
BL X X X X X -X X X X X X 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12.
1. BL: Beautiful Light Technology Corp.,( B.L.T.C.) 2. Bulb Shape: O:O-Type; T:T-Type; M : M-Type 3. Bulb Type:G4-G4; MR11-11; MR16-16; AR111-111; PAR36-36; PAR16-16; PAR20-20; PAR30-30;
PAR38-38; B55-55 4. Bulb Head( Lamp Holder ):G4.0-40; EZ10-Z10; GU/GZ5.3(GU53)-53; GU/GZ4.0-40; ST-Screw
Terminal; G53-53;GU10-10; E11-11; E14-14; E17-17; B22-22; E26-26; E27-27; E39-39; E40-40 5. Optics: N-Acrylic Lens, S-Sphere Lens, D-Diffusers, CC- Globe Lamp
BeamAngle:N15-08˚,N25-16˚,N40-21˚,N60-26˚,N80-41˚,SS-8~15˚,M-16~25˚,W-32~40˚,WW-55˚,WD-40˚,S40-40˚,S60-36˚,D120>88˚, CC>180 degree
6. LED Brand: N: Nichia; C: Cree; L: Lumileds; Others: O ( Everlight / Prolight ) 7. Wavelength: W- White, NW-Neutral White, WW- Warm White, R , G , B , A 8. LED Number and LED Quantity:1-(1.1/1.3/1.5)W,3-2.5W,5-4/4.5W, 1X7-8W, 1X9-10W, 31-3*1.1/3*1.3,
41-4*1.0W,51-5*1.0/5*1.5W,71-7*1.0W,91-9*1.1/9*1.3W,92-9*2W,161-16*1.1W
9. Input Voltage: L- 12V, M- 24V, H- 85~265V, S- Constant Current. Input Voltage of section: 1:110 V, 2:220V No Sign:85~265V (Only 〝H〞) H1 Holder: E11 E14 E17 E26, H2 Holder: GU10 E14 B22 E27, H Holder: GU10 E11 E14 E17 B22 E26 E27
10. Product Division: LG-Long Neck, XP-Cree MCE, RL-Indoor, DM-Dimming Integration DM1- Dimming Integration, DM2- Dimmable Lamp 11.Holder New/Old Version: Old:〝O〞, New: No Sign
12. Customer Special Modify: Catch two letters to Customer Corp.
12
Beautiful Light Technology Corp,.
Product Warranty
B.L.T.C warrants products for 1 year from the date of purchase to be free from defects in materials and workmanship which may lead to failure of the bulb to transmit light.
During the warranty period, if the product fails to perform as described above, B.L.T.C. entire liability will be the repair or replacement of such defective product. In no event shall B.L.T.C. be responsible for removal or reinstallation of any product or for the expenses thereof. The above warranty does not apply to, and B.L.T.C. makes no warranties with respect to products which have been subjected to misuse neglect, accident, abuse, or operating or environment conditions that deviate from the parameters established in applicable specifications; or have been improperly installed, stored, maintained, repaired or altered by anyone other than B.L.T.C.; or have had their serial numbers or month and year of manufacture or shipment removed, defected or altered. This warranty is given only to the original purchase and may not be assigned or transferred to any other party. It is purchaser’s obligation to retain documentation that indicated date of purchase.
Safety & Environment Specifications
T-type Series MR11 bulbs are manufactured to conform safety criteria for CE, FCC approbations & RoHS
Life, Reliability and Lumen Maintenance
Certificated Mark Item of certificated standard
CE EMC:EN55015,EN61000-3-2,EN61000-3-3,EN61547 (IEC61000-4-2, IEC61000-4-3
IEC61000-4-4, IEC61000-4-5, IEC61000-4-6, IEC61000-4-8, IEC61000-4-11) LVD: EN60968-1, EN60598-1, EN61347-2-13
F.C.C PART 15B
RoHS BTRS0605180105 Test Standard:2002/95/EC ; EPA3050B:1996,EN1122:2001, EPA3052:1996, EPA3060A, EPA7196, EPA7196, EPA3540C, EPA8270C
13
Beautiful Light Technology Corp,.
Replacement with Halogen / Incandescent
No.16-2, Neighbor 12, Jinlan , Jhongpu, Ciayi 60665, Taiwan/ bltc.com.tw/ T:+886-5-2392881/ F: +886-5-2392007
LED Power Total Power Equal Halogen Extend Life Time
1X1.3W (T-type) 2W 15W 6X
1X2.5W (O/T-type) 3W 20W 6X
1X4.0W (T-type) 5W 30W 6X
1X4.5W (MCE) 5.5W 45W 6X
3X1.3W (M-type) 5W 20W 6X
3X1.3W (T-type) 5W 35W 6X
4X1.0W (T-type) 5W 45W 6X
3X2.5W (T-type) 9W 50W 6X
5X1.0W (T-type) 6W 50W 6X
5X2.0W (T-type) 12W 65W 6X
6X1.2W (T-type) 9W 55W 6X
7X1.0W (T-type) 9W 65W 6X
9X1.3W (T-type) 14W 75W 6X
9X2.0W (T-type) 20W 120W 6X