synchronous motors
TRANSCRIPT
![Page 1: Synchronous motors](https://reader035.vdocuments.us/reader035/viewer/2022062220/557cbe48d8b42a59078b48ef/html5/thumbnails/1.jpg)
•A synchronous machine is a most important type of electric machine.
•Synchronous Machine used at generating stations are known as Synchronous Generators or Alternators
•Synchronous motors are widely used in Industries and are well known for their const. speed operation
•Electromechanical energy conversion occurs whenever a change in flux is associated with mechanical motion.
Introduction
![Page 2: Synchronous motors](https://reader035.vdocuments.us/reader035/viewer/2022062220/557cbe48d8b42a59078b48ef/html5/thumbnails/2.jpg)
It consists of:
StatorRotorField Windings (On rotor)Armature Windings (On Stator)
Construction of Synchronous machines
![Page 3: Synchronous motors](https://reader035.vdocuments.us/reader035/viewer/2022062220/557cbe48d8b42a59078b48ef/html5/thumbnails/3.jpg)
Diagram
![Page 4: Synchronous motors](https://reader035.vdocuments.us/reader035/viewer/2022062220/557cbe48d8b42a59078b48ef/html5/thumbnails/4.jpg)
It is a stationary member
It is the cylindrical portion inside which the rotor rotates
An air gap is provided between the stator and the rotor
Armature winding are 3 phased and are housed in the slots cut in the stator
It consists of cast iron stator frame, a cylindrical laminated , a cylindrical laminated and uniformly slotted core.
Stator
![Page 5: Synchronous motors](https://reader035.vdocuments.us/reader035/viewer/2022062220/557cbe48d8b42a59078b48ef/html5/thumbnails/5.jpg)
Rotor is the rotating part of the machine
Can be classified as: (a) Cylindrical Rotor and (b) Salient Pole rotor
Large salient-pole rotors are made of laminated poles retaining the winding under the pole head.
Rotor
![Page 6: Synchronous motors](https://reader035.vdocuments.us/reader035/viewer/2022062220/557cbe48d8b42a59078b48ef/html5/thumbnails/6.jpg)
Armature windings connected are 3-phase and are either star or delta connected
The windings are 120 degrees apart and normally use distributed windings
Armature Windings (On Stator)
![Page 7: Synchronous motors](https://reader035.vdocuments.us/reader035/viewer/2022062220/557cbe48d8b42a59078b48ef/html5/thumbnails/7.jpg)
The 3-phase armature winding is distributed in the slots along the armature air gap periphery
For example: Consider that we have 18 slots, 2-pole 3-phase winding..
Hence we have 9 slots/per pole as shown figure..
![Page 8: Synchronous motors](https://reader035.vdocuments.us/reader035/viewer/2022062220/557cbe48d8b42a59078b48ef/html5/thumbnails/8.jpg)
The winding diagram of phase ‘a’ can be shown as:
Similarly, phase ‘b’ and phase ‘c’ are distributed in same manner
![Page 9: Synchronous motors](https://reader035.vdocuments.us/reader035/viewer/2022062220/557cbe48d8b42a59078b48ef/html5/thumbnails/9.jpg)
This implies that per phase emf is getting divided in each phase.
When all the 3-phase are connected then mmf-phase graph for each phase is displaced by 120 degrees
The mmf-phase graph can be drawn as:
![Page 10: Synchronous motors](https://reader035.vdocuments.us/reader035/viewer/2022062220/557cbe48d8b42a59078b48ef/html5/thumbnails/10.jpg)
The field winding of a synchronous machine is always energized with direct current
Under steady state condition, the field or exciting current is given
Ir = Vf/Rf
Vf = Direct voltage applied to the field winding Rf= Field winding Resistance
Field Windings (on Rotor)
![Page 11: Synchronous motors](https://reader035.vdocuments.us/reader035/viewer/2022062220/557cbe48d8b42a59078b48ef/html5/thumbnails/11.jpg)
Mostly all the synchronous machines use Distributed winding
Attempt is made to use all the slots available under a pole for the winding which makes the nature of the induced e.m.f. moe sinusoidal
Consider a sync. Machine with 3-phase winding,
Slots, s= 18 slots
Poles=2
slots per pole, g= s/p= 9
slots/pole/phase= g/3 = 3
Distribution Factor (Kd)
![Page 12: Synchronous motors](https://reader035.vdocuments.us/reader035/viewer/2022062220/557cbe48d8b42a59078b48ef/html5/thumbnails/12.jpg)
• Let E = Induced e.m.f. per coil and there are 3 coils per phase
•In concentrated type all the coil sides will be placed in one slot under a pole. So induced e.m.f. in all the coils will achieve maxima and minima at the same time i.e. all of them will be in phase. Hence resultant e.m.f. after connecting coils in series will be algebraic sum of all the e.m.f.s. as all are in phase
![Page 13: Synchronous motors](https://reader035.vdocuments.us/reader035/viewer/2022062220/557cbe48d8b42a59078b48ef/html5/thumbnails/13.jpg)
As against this, in distributed type, coil sides will be distributed, one each in the 3 slots per phase available under a pole as shown in the Fig.
Slot pitch , Y= ԓP/s = 20 deg.
![Page 14: Synchronous motors](https://reader035.vdocuments.us/reader035/viewer/2022062220/557cbe48d8b42a59078b48ef/html5/thumbnails/14.jpg)
In general, let there be
Slots per pole = n
slots/pole/phase= m
Let turns/phase= Nph
Turns per slot, N1 = Nph/ q
Induce emf/turn =E1 = Ec / N
Induced emf/ slot= E = E1 * N1
= Ec * Nph
Nph q
= Ec
q
![Page 15: Synchronous motors](https://reader035.vdocuments.us/reader035/viewer/2022062220/557cbe48d8b42a59078b48ef/html5/thumbnails/15.jpg)
q – slots for each phase under one pole
Since all the coils are connected in series, hence the resultant emf is phasor sum of all the emfs
![Page 16: Synchronous motors](https://reader035.vdocuments.us/reader035/viewer/2022062220/557cbe48d8b42a59078b48ef/html5/thumbnails/16.jpg)