switch stands - voestalpine · 336 with cover column switch stand 112-e, 112-g and 31-b an enclosed...

4
www.voestalpine.com/nortrak voestalpine Nortrak Inc. Switch Stands

Upload: others

Post on 11-Jul-2020

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Switch Stands - Voestalpine · 336 with Cover COLUMN SWITCH STAND 112-E, 112-G AND 31-B An enclosed and simple design for yard or industrial switches from 60lb and heavier. voestalpine

www.voestalpine.com/nortrakvoestalpine Nortrak Inc.

Switch Stands

Page 2: Switch Stands - Voestalpine · 336 with Cover COLUMN SWITCH STAND 112-E, 112-G AND 31-B An enclosed and simple design for yard or industrial switches from 60lb and heavier. voestalpine

22-E Trihandle

36-E Trihandle

» Can be trailed or thrown manually

» When a train runs through the switch, switch points are opened by wheel flanges, and then throw is completed automatically

» During automatic trailing, the target rotates so that the switch point position is indicated, while the hand lever remains stationary

» Ergonomically designed for operator safety

» Grasp point 30” above the ground

» Typical 180 degree movement reduced to 120 degrees

The RACOR® trailable 22-E and 22-EH are extra heavy duty trailable switch stands for yard, ladder and busy switch turnouts where trains often run through switches.

The RACOR® non-trailable 36-E and 36-EH are extra heavy duty switch stands for unrestricted use.

36-E Elevated Ball Handle

» 36-E most often used in yard operations. 36-EH, with high mast and target, is suitable for mainline use

ADVANTAGES

» All models constructed of identical extra heavy cast housing and heat-treated operating parts using high strength steel where applicable

» The extra large bearing surfaces of the wearing parts assure long life and a minimum of lost motion

» Adjustable connecting rod and crank eye permit accurate setting of the points without respiking the stand

» Available with low mast and target (22-E) or high mast and target (22-EH)

» Available with Trihandle or elevated Ball handle or straight handle

» Replacement parts readily available

» For power operation, the model 22 stand can be paired with the AUTOMATER® HT, AUTOMATER® HP, or Hydraulic Switch Machine.

SWITCH STANDS

Page 3: Switch Stands - Voestalpine · 336 with Cover COLUMN SWITCH STAND 112-E, 112-G AND 31-B An enclosed and simple design for yard or industrial switches from 60lb and heavier. voestalpine

SWITCH STAND 336-EC

» Positions operator either parallel (112-E) or perpendicular (112-G) to the track

» Model 31-B is identical to the 112 models except that it uses a sealed design, keeping the spindle free of ice and snow

» Unique design prevents spindle and hand lever from becoming disengaged from the bracket. Double protection is provided against dropping of the spindle

» Both models constructed of identical extra heavy cast housing and heat-treated operating parts using high strength steel where applicable

» The extra large bearing surfaces of the wearing parts assure long life and a minimum of lost motion

» Adjustable connecting rod and crank eye permit accurate setting of the points without respiking the stand

» Replacement parts readily available

The RACOR® 112-E and 112-G are extremely rugged, column-type mainline switch stands.

The RACOR® design 336-EC is an enclosed, parallel, grounded switch stand.

» For tongue or embedded switches

» A large hinged cover completely encloses the top of the stand

» Adjustable crank for ease of throw

» Constructed of extra heavy cast housing and heat-treated operating parts using high strength steel where applicable.

» Available with rigid or spring connecting rods

» Available with boxes for enclosing connecting and switch rods

» Replacement parts readily available

» Long resilient spring provides minimum shock when trailed

» Long resilient spring provides adequate holding power for closed switch

» Recommended for use with parallel throw adjustable switch stand

SPRING CONNECTING ROD ENCLOSED TYPE

336 without Cover

336 with Cover

COLUMN SWITCH STAND 112-E, 112-G AND 31-B

An enclosed and simple design for yard or industrial switches from 60lb and heavier.

Page 4: Switch Stands - Voestalpine · 336 with Cover COLUMN SWITCH STAND 112-E, 112-G AND 31-B An enclosed and simple design for yard or industrial switches from 60lb and heavier. voestalpine

voestalpine Nortrak is a member of the VAE GmbH group of companies. With sales and production companies in over 20 countries across the world, the group has a depth of trackwork knowledge unrivalled by any other producer. www.voestalpine.com/vae

VAE GmbH is, in turn, a wholly owned subsidiary of voestalpine AG. Dedicated to innovation and technological excellence, the voestalpine group consists of some 360 facilities in over 60 countries worldwide. www.voestalpine.com

U S A

Birmingham, AL

Cheyenne, WY

Chicago Heights, IL

Decatur, IL (Foundry)

Newton, KS

Pueblo, CO

C A N A D A

Richmond, BC

M E X I C O

NORTRAK-DAMY

Guadalajara, JA www.damy.com

Nortrak is able to draw on a world of experience and knowledge.Visit our corporate web site: www.voestalpine.com/nortrak. Select Company then Contacts for a list of official contacts.

voes

talp

ine

No

rtra

k In

c. S

witc

h St

and

Bro

chur

e 20

17

Prin

ted

in C

ana

da