switch machine handling arm
DESCRIPTION
The Switch machine handling harm is a patented Geatech’s equipment to lift up to 300 Kg for rail changing, site starting up and trolleys loading operations. Ideal for putting into service of switch machine. The switch machine handling harm is necessary when the weight of the load that has to be moved is too heavy for two people. While an operator operates the lifting and lowering, a second operator can easily position the load where necessary. Once positioned, the switch machine handling arm can be used by a single operator.TRANSCRIPT
GEATECH S.p.A. 40051 Altedo (Bologna) Italy Via del Palazzino, 6/B Tel. +39.051.6601514 – Fax +39.051.6601309 e-‐mail: [email protected] -‐ www.geatech.it
UNI EN ISO 9001 : 2000
Certificato n° 50 100 3132 Rev.01
GEATECH S.p.A. si riserva di modificare le attrezzature e le macchine di cui al presente catalogo in qualsiasi momento e senza preavviso, onde adeguarle al progresso tecnologico. Le norme, i disegni e i dati tecnici vengono pertanto rimessi senza impegno da parte nostra. RA290909
FEATURES CODE F1096A01 Weight (Kg) 55 Overall dimensions (mm)
Open : 2000x1680x270 Closed : 1600x580x270
Capacity (Kg) 300
This patented derailing arm is a tool to lift loads or machines up to 300 Kgs that have to be put on a trolley; it’s very helpful to move the switching boxes or inductive boxes. It could be an alternative to normal rail-‐road chargers and needs only 2 operators; once is clamp on the rail, the loads can be moved by one man only, working on lifting lever. At the end of the work, it can be folded and put in the car’s boot.
DERAILING ARM F1096A01