LOADVOUT

SUPPLYVIN

CIRCUITBREAKER

PROTECTIONMOSFET

ADJUSTABLEOUTPUT CLAMPVOLTAGE

SURGE STOPPERSURGE STOPPERFAULTTIMER

20V/DIV

100ms/DIV

100V INPUT SURGE

12V

12V

VIN

VOUT

27V ADJUSTABLE CLAMP

Visit analog.com

SURGESTOPPERS

Compact, Precise Overvoltage and Overcurrent Protection

Automotive, industrial, and aviation electronics need to survive and operate through power supply surges endemic to their environment. Traditional overvoltage (OV) and overcurrent (OC) protection relies on capacitors, transient voltage suppressors (TVS), fuses, diodes, and inductors, but these discrete solutions are bulky, inaccurate, and blow the fuse during a sustained fault. Our surge stopper family replaces these passive components with a controller and series protection MOSFET, enabling a compact and precise solution.

X Shields Load Electronics from High Voltage Surges

X Allows Uninterrupted System Operation through Surges

X Protects Supply from Overload and Short-Circuit

X Disconnects Load from Supply for Sustained Faults

X Adjustable Clamp Voltage Eases Design Changes and Reuse

X Tight Accuracy Minimizes Overdesign and Reduces Cost

X Low Profile, Surface Mount Solution Enables Compact Form Factor

X Automotive and Military-Plastic Temperature Grades

2 Visit analog.com 3

Surge Stopper with Circuit Breaker X Resistor-Adjustable 2% Accurate Clamp Voltage

X Input Surge: Linear Regulator for Adjustable Time

X −60V Reverse Input Protection

X Foldback Current-Limited Circuit Breaker with Adjustable Delay

X Fault Timer Accelerated by MOSFET Voltage Drop

Linear Surge Stoppers

During normal operation, a linear surge stopper fully turns on the MOSFET to provide a low resistance path for the load current. When the input supply volt-age surges, the output is linearly regulated to a safe voltage set by a resistive divider, enabling ride-through operation. A capacitive fault timer protects the MOSFET by limiting the time spent in the high dissipation regulation state.

8µA Quiescent Current Surge Stopper X Low 8µA Operating IQ, 6µA in Shutdown

X Pin-Selectable Gate Clamp for 12V and 24V/28V Systems

X Input Surge: Clamps MOSFET Gate for Adjustable Time

X −60V Reverse Input Protection

X Current-Limited Circuit Breaker with Adjustable Delay

X Fault Timer Accelerated by MOSFET Power

Floating Surge Stopper X Rugged Floating Topology for >500V Operation

X Resistor-Adjustable 3% Accurate Clamp Voltage

X Input Surge: Linear Regulator for Adjustable Time

Surge Stopper with Ideal Diode X LT4363 Functions Plus Ideal Diode Control

X Ideal Diode for Output Holdup and Reverse Protection

X Resistor-Adjustable 2.4% Accurate Clamp Voltage

X −40V Reverse-Input, −20V Reverse-Output Protection

TIMER

FBVCC

LT4363

VOUTVIN

4V TO 80V

UV

SHDN

OVTIMER

FB

LTC4364

FAULT

VIN4V TO 80V

VOUT

ENABLE

i

VCC

CLAMPSELECT

TIMER

FAULTLTC4380

VIN4V TO 72V

VOUT

LTC4366

VOUT

FB

TIMER

VSS

VIN9V TO >500V

Visit analog.com 3

Switching Surge Stopper

During normal operation, a switching surge stopper turns on an external MOSFET continuously to pass the input voltage through to the output with minimum conduction loss. When an input voltage surge occurs, it starts switching the external MOSFET to operate as a high efficiency switching DC/DC regulator to protect critical downstream components by limiting the output voltage and current.

Protection Controllers

Protection controllers disconnect immediately during overvoltage and provide a compact solution for power entry protection in battery-powered portable equipment.

Undervoltage (UV), Overvoltage (OV), Overcurrent (OC), and Reverse Input (RI) Protection Controllers

X Block Voltages Outside UV-OV Window

X −40V Reverse Input Protection

X Adjustable 1.5% Accurate UV, OV Thresholds

X Low Quiescent and Shutdown Currents

X Compact Solution Footprint

Overvoltage and Overcurrent Protection Controllers X 2.5V to 5.5V Operation

X Fixed 5.8V ±2% Overvoltage Turn-Off Threshold

X <1µs Fast Overvoltage Turn-Off

X Reverse Input Protection FET Driver Output

X Compact Solution Footprint

High Efficiency Switching Surge Stopper X High Efficiency for High Power (>5A) Surges

X Normal Operation: 100% Duty Cycle with MOSFET On

X Input Surge: Switching Regulator with Adjustable Timer

X Resistor Adjustable 1.1% Accurate Clamp Voltage

X Adjustable Current Limit

X Inherent LC Filter Improves Input EMI

Device VIN UV OV RI OCForward

Current TripReverse

Current Trip

LTC4365 2.5V to 34V • • •

LTC4367 2.5V to 60V • • •

LTC4368 2.5V to 60V • • • • 50mV −50mV/−3mV

Device VIN(MAX) OV OC MOSFET

LTC4360 80V • External N-Ch

LTC4361 80V • • External N-Ch

LTC4362 28V • • Internal 1.5A

UV

SHDN

OV RETRY

FAULTLTC4368

VIN2.5V TO 60V VOUT

VALID WINDOW

VIN

VIN

VOUTVOUT

OV = 36VUV = 7V

200ms/DIV

–40V20V/DIV

GND

+70V20V/DIV

Analog Devices, Inc. Worldwide Headquarters

Analog Devices, Inc. One Technology Way P.O. Box 9106 Norwood, MA 02062-9106 U.S.A. Tel: 781.329.4700 (800.262.5643, U.S.A. only) Fax: 781.461.3113

Analog Devices, Inc. Europe Headquarters

Analog Devices GmbH Otl-Aicher-Str. 60-6480807 München Germany Tel: 49.89.76903.0 Fax: 49.89.76903.157

Analog Devices, Inc. Japan Headquarters

Analog Devices, KK New Pier Takeshiba South Tower Building 1-16-1 Kaigan, Minato-ku, Tokyo, 105-6891 Japan Tel: 813.5402.8200 Fax: 813.5402.1064

Analog Devices, Inc. Asia Pacific Headquarters

Analog Devices 5F, Sandhill Plaza 2290 Zuchongzhi Road Zhangjiang Hi-Tech Park Pudong New District Shanghai, China 201203 Tel: 86.21.2320.8000 Fax: 86.21.2320.8222

©2017–2018 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners.Ahead of What’s Possible is a trademark of Analog Devices.PHsurgestoppers-9/18(B)

analog.com

Analog Devices provides evaluation boards demonstrating surge stopper circuits for automotive and military surge standards such as ISO-7637-2 and MIL-STD-1275D. Each board has been tested by an independent lab with the complete test report available online.

DC2062 for 12V, 3.8A ISO-7637-2 Application Features LT4363 Surge Stopper

Rides through 100V, 500ms Load Dump Pulse

Latchoff and Auto-Retry Options

Parameter Min Typ Max Units

Input Supply Operating Range 5 12 23.5 V

Input Supply 500ms Surge 100 V

Output Regulation Voltage 23.5 25 25.4 V

Current Limit 3 3.8 4.6 A

DC2150 for 28V, 5A MIL-STD-1275D Application Features LTC4366 and LT4363 Surge Stoppers

Rides through 100V, 500ms Surge

Four Assembly Options, Full-Featured Option Available

Parameter Min Typ Max Units

Input Supply Operating Range 8 28 40 V

Input Supply 500ms Surge 100 V

Output Regulation Voltage 41 43.6 46 V

Current Limit 4.4 5 5.6 A

Overvoltage Protection Selection Guide

DeviceOVP

Type* OCP Operating VIN Stops VIN

Reverse Input IQ (µA) ISHDN (µA) MOSFET

OVP Accuracy

Fault Timer

Blocks IREV

Temp Grades

Demo Board Package (mm x mm)

Surge Stoppers

LT4356 1 •† 4V to 80V >100V −60V 1210 7 N-Ch 2% • C, I, H, MP DC1018 4x3 DFN-12, MSOP-10, SO-16

LT4363 1 • 4V to 80V >100V −60V 970 7 N-Ch 2% • C, I, H, MP DC1935 4x3 DFN-12, MSOP-12, SO-16

LTC4364 1 • 4V to 80V >100V −40V 483 10 N-Ch 2.4% • • C, I, H DC2027 4x3 DFN-14, MSOP-16, SO-16

LTC4366 1 9V to >500V >500V External 159 5 N-Ch 3% • C, I, H, MP DC1850 3x2 DFN-8, TSOT-8

LTC4380 2 • 4V to 72V >100V −60V 8 6 N-Ch ~10% • C, I, H DC2178 3x3 DFN-10, MSOP-10

LTC7860 3 • 3.5V to 60V >100V External 770 7 P-Ch 1.1% • E, I, H, MP DC2239 MSOPE-12

Protection Controllers

LTC4365 4 2.5V to 34V >100V −40V 125 10 N-Ch 1.5% C, I, H DC1555 3x2 DFN-8, TSOT-8

LTC4367 4 2.5V to 60V >100V −40V 70 5 N-Ch 1.5% C, I, H DC2417 3x3 DFN-8, MSOP-8

LTC4368 4 • 2.5V to 60V >100V −40V 80 5 N-Ch 1.5% • C, I, H DC2418 3x3 DFN-10, MSOP-10

LTC4360 4 2.5V to 5.5V 80V External 230 1.5 N-Ch 2% C, I DC1505 SC70-8

LTC4361 4 • 2.5V to 5.5V 80V External 230 1.5 N-Ch 2% C, I, H DC1506 2x2 DFN-8, TSOT-8

LTC4362 4 • 2.5V to 5.5V 28V External 220 1.5 1.5A 2% C, I DC1575 2x3 DFN-8OCP = Overcurrent Protection, * Overvoltage Protection Type: 1 = Linear regulation of output; 2 = Clamps MOSFET gate voltage; 3 = Switching regulation of output; 4 = Disconnects output from input; † Overcurrent protection only

below 100V

info@excelpoint.com.hkwww.excelpoint.com.cn

Excelpoint Systems (H.K.) LimitedExcelpoint International Trading (Shanghai) Co., Ltd.

+86 731 8892 5495ChengshaBeijing +86 10 6580 2113Hong Kong +852 2503 2212 Shanghai +86 21 2220 3188

Qingdao +86 532 8502 6539Nanjing +86 25 8689 3130 Ningbo +86 574 8386 5759Jinan +86 532 8096 5769Fuzhou +86 591 8335 7003Chengdu +86 28 8652 7611 Guangzhou +86 20 3893 9561 +86 571 8528 2185Hangzhou

Suzhou +86 512 6530 8103Shenzhen +86 755 8364 0166 +86 27 8769 0883Wuhan Xiamen +86 592 504 2386Xian +86 29 8765 1058 +86 136 2830 7074Chongqing Dongguan +86 158 8963 8656 Dalian +86 156 4083 6155

Huizhou +86 136 8076 4680 Shenyang +86 156 0405 4122 Tianjin +86 139 2065 6573Hefei +86 138 5656 7447Zhengzhou +86 138 0384 6359Yantai +86 155 5222 0532Wuxi +86 150 6185 1831 Zhuhai +86 137 2622 4480

China ThailandMalaysia PhilippinesIndia IndonesiaSingapore (Headquarters) Australia VietnamPakistanNew Zealand Sri Lanka USA

Analog Devices, Inc. Worldwide Headquarters

Analog Devices, Inc. One Technology Way P.O. Box 9106 Norwood, MA 02062-9106 U.S.A. Tel: 781.329.4700 (800.262.5643, U.S.A. only) Fax: 781.461.3113

Analog Devices, Inc. Europe Headquarters

Analog Devices GmbH Otl-Aicher-Str. 60-6480807 München Germany Tel: 49.89.76903.0 Fax: 49.89.76903.157

Analog Devices, Inc. Japan Headquarters

Analog Devices, KK New Pier Takeshiba South Tower Building 1-16-1 Kaigan, Minato-ku, Tokyo, 105-6891 Japan Tel: 813.5402.8200 Fax: 813.5402.1064

Analog Devices, Inc. Asia Pacific Headquarters

Analog Devices 5F, Sandhill Plaza 2290 Zuchongzhi Road Zhangjiang Hi-Tech Park Pudong New District Shanghai, China 201203 Tel: 86.21.2320.8000 Fax: 86.21.2320.8222

©2017–2018 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners.Ahead of What’s Possible is a trademark of Analog Devices.PHsurgestoppers-9/18(B)

analog.com

Analog Devices provides evaluation boards demonstrating surge stopper circuits for automotive and military surge standards such as ISO-7637-2 and MIL-STD-1275D. Each board has been tested by an independent lab with the complete test report available online.

DC2062 for 12V, 3.8A ISO-7637-2 Application Features LT4363 Surge Stopper

Rides through 100V, 500ms Load Dump Pulse

Latchoff and Auto-Retry Options

Parameter Min Typ Max Units

Input Supply Operating Range 5 12 23.5 V

Input Supply 500ms Surge 100 V

Output Regulation Voltage 23.5 25 25.4 V

Current Limit 3 3.8 4.6 A

DC2150 for 28V, 5A MIL-STD-1275D Application Features LTC4366 and LT4363 Surge Stoppers

Rides through 100V, 500ms Surge

Four Assembly Options, Full-Featured Option Available

Parameter Min Typ Max Units

Input Supply Operating Range 8 28 40 V

Input Supply 500ms Surge 100 V

Output Regulation Voltage 41 43.6 46 V

Current Limit 4.4 5 5.6 A

Overvoltage Protection Selection Guide

DeviceOVP

Type* OCP Operating VIN Stops VIN

Reverse Input IQ (µA) ISHDN (µA) MOSFET

OVP Accuracy

Fault Timer

Blocks IREV

Temp Grades

Demo Board Package (mm x mm)

Surge Stoppers

LT4356 1 •† 4V to 80V >100V −60V 1210 7 N-Ch 2% • C, I, H, MP DC1018 4x3 DFN-12, MSOP-10, SO-16

LT4363 1 • 4V to 80V >100V −60V 970 7 N-Ch 2% • C, I, H, MP DC1935 4x3 DFN-12, MSOP-12, SO-16

LTC4364 1 • 4V to 80V >100V −40V 483 10 N-Ch 2.4% • • C, I, H DC2027 4x3 DFN-14, MSOP-16, SO-16

LTC4366 1 9V to >500V >500V External 159 5 N-Ch 3% • C, I, H, MP DC1850 3x2 DFN-8, TSOT-8

LTC4380 2 • 4V to 72V >100V −60V 8 6 N-Ch ~10% • C, I, H DC2178 3x3 DFN-10, MSOP-10

LTC7860 3 • 3.5V to 60V >100V External 770 7 P-Ch 1.1% • E, I, H, MP DC2239 MSOPE-12

Protection Controllers

LTC4365 4 2.5V to 34V >100V −40V 125 10 N-Ch 1.5% C, I, H DC1555 3x2 DFN-8, TSOT-8

LTC4367 4 2.5V to 60V >100V −40V 70 5 N-Ch 1.5% C, I, H DC2417 3x3 DFN-8, MSOP-8

LTC4368 4 • 2.5V to 60V >100V −40V 80 5 N-Ch 1.5% • C, I, H DC2418 3x3 DFN-10, MSOP-10

LTC4360 4 2.5V to 5.5V 80V External 230 1.5 N-Ch 2% C, I DC1505 SC70-8

LTC4361 4 • 2.5V to 5.5V 80V External 230 1.5 N-Ch 2% C, I, H DC1506 2x2 DFN-8, TSOT-8

LTC4362 4 • 2.5V to 5.5V 28V External 220 1.5 1.5A 2% C, I DC1575 2x3 DFN-8OCP = Overcurrent Protection, * Overvoltage Protection Type: 1 = Linear regulation of output; 2 = Clamps MOSFET gate voltage; 3 = Switching regulation of output; 4 = Disconnects output from input; † Overcurrent protection only

below 100V