supplement to isofocus - international organization for ... · pdf fileiso update, supplement...
TRANSCRIPT
ISO Update
Supplement to ISOfocus
January 2015
ISO Update, Supplement to ISO Focus -- January 2015 1
International Standards in process
An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an Interna-tional Standard takes the form of a committee draft (CD) - this is cir-culated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.
CD registered
Period from 01 December to 31 December 2014
These documents are currently under consideration in the technical committee.
They have been registred at the Central Secretariat.
PC 286 Collaborative business relationship management -- Framework
ISO/CD 11000 Collaborative business relationship manage-ment — Framework
TC 20 Aircraft and space vehicles
ISO/CD 19683 Space systems — Design qualification and ac-ceptance tests of small-scale satellite and units seeking low-cost and fast-delivery
TC 22 Road vehicles
ISO/CD 11898-2
Road vehicles — Controller area network (CAN) — Part 2: High-speed medium access unit
TC 23 Tractors and machinery for agriculture and forestry
ISO/DTS 19858
Forestry machines — Portable chain-saws — Test method for evaluating saw chain oil lubricity
TC 34 Food products
ISO 2256:1984/CD Amd 1
Dried mint (spearmint) (Mentha spicata Lin-naeus syn. Mentha viridis Linnaeus) — Specifi-cation — Amendment 1
ISO 6571:2008/CD Amd 1
Spices, condiments and herbs — Determina-tion of volatile oil content (hydrodistillation method) — Amendment 1
ISO/DTR 17622
Molecular biomarker analysis — SSR analysis of sunflower
TC 39 Machine tools
ISO/CD 14955-2
Machine tools - Environmental evaluation of machine tools — Part 2: Methods for meas-uring energy supplied to machine tools and machine tool components
ISO/CD 19085-6
Woodworking machines — Safety — Part 6: Single spindle vertical moulding machines (“toupie”)
ISO/CD 19085-7
Woodworking machines — Safety — Part 7: Surface, thicknessing, combined surface/thick-nessing planing machines
TC 58 Gas cylinders
ISO/CD 10156 Gases and gas mixtures — Determination of fire potential and oxidizing ability for the selec-tion of cylinder valve outlets
TC 61 Plastics
ISO/CD 4589-1 Plastics — Determination of burning behaviour by oxygen index — Part 1: Guidance
ISO/CD 4589-2 Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-tempera-ture test
ISO/CD 4589-3 Plastics — Determination of burning behaviour by oxygen index — Part 3: Elevated-tempera-ture test
TC 69 Applications of statistical methods
ISO/CD 22514-5
Statistical methods in process management — Capability and performance — Part 5: Process capability estimates and performance for at-tributive characteristics
TC 71 Concrete, reinforced concrete and pre-stressed concrete
ISO/CD 1920-2 Testing of concrete — Part 2: Properties of fresh concrete
TC 92 Fire safety
ISO/CD 12828-2
Validation methods for fire gas analyses — Part 2: Validation of quantification method
TC 94 Personal safety -- Protective clothing and equipment
ISO/CD 11613 Protective clothing for firefighters — Laboratory test methods and performance requirements
ISO/CD 18639-1
PPE ensembles for firefighters undertaking specialist rescue activities — Part 1: General
ISO/CD 18639-2
PPE ensembles for firefighters undertak-ing specialist rescue activities — Part 2: Compatibility
ISO/CD 18639-3
PPE ensembles for firefighters undertaking specialist rescue activities — Part 3: Clothing
ISO/CD 18639-4
PPE ensembles for firefighters undertaking specialist rescue activities — Part 4: Gloves
ISO/CD 18639-5
PPE ensembles for firefighters undertaking specialist rescue activities — Part 5: Helmet
ISO/CD 18640-1
Protective clothing for fire-fighters- physiologi-cal impact — Part 1: Measurement of coupled heat and mass transfer with the sweating TORSO
ISO/CD 18640-2
Protective clothing for fire-fighters- physi-ological impact — Part 2: Determination of physiological heat load caused by protective clothing worn by fire-fighters
TC 106 Dentistry
ISO 20126:2012/CD Amd 1
Dentistry — Manual toothbrushes — General requirements and test methods — Amendment 1
ISO/DTS 22911
Dentistry — Preclinical evaluation of dental implant systems — Animal test methods
TC 108 Mechanical vibration, shock and condi-tion monitoring
2 ISO Update, Supplement to ISO Focus -- January 2015
ISO 20283-3:2006/CD Amd 1
Mechanical vibration — Measurement of vibration on ships — Part 3: Pre-installation vibration measurement of shipboard equipment — Amendment 1
ISO/CD 20283-5
Mechanical vibration — Measurement of vibra-tion on ships — Part 5: Measurement, evalu-ation and reporting of vibration with regard to habitability on passenger and merchant ships
ISO/CD 29821-2
Condition monitoring and diagnostics of machines — Ultrasound — Part 2: Procedures and validation
TC 113 Hydrometry
ISO/CD 9123 Measurement of liquid flow in open channels — Stage-fall-discharge relationships
TC 120 Leather
ISO/CD 15115 Leather — Vocabulary
TC 159 Ergonomics
ISO/CD 9241-11
Ergonomics of human-system interaction — Part 11: Usability: Definitions and concepts
ISO/CD 9241-112
Ergonomics of human-system interaction — Part 112: Principles and general guidance for the presentation of information
ISO/CD 9241-125
Ergonomics of human-system interaction — Part 125: Guidance on visual presentation of information
TC 163 Thermal performance and energy use in the built environment
ISO/CD 52003-1
Energy performance of buildings — Indica-tors, requirements and certification — Part 1: General aspects and application to the overall energy performance
TC 172 Optics and photonics
ISO/CD 10110-17
Optics and photonics — Preparation of draw-ings for optical elements and systems — Part 17: Laser irradiation damage threshold
TC 178 Lifts, escalators and moving walks
ISO/DTR 14799-1
Comparison of worldwide escalator and mov-ing walk safety standards — Part 1: Rule by rule comparison
ISO/DTR 14799-2
Comparison of worldwide escalator and mov-ing walk safety standards — Part 2: Abbrevi-ated comparison and comments
TC 190 Soil quality
ISO/CD TR 19588
Background information and guidance on environmental cyanide analysis
ISO/CD 20131-1
Soil quality — Simple laboratory assessments for characterizing the denitrification in soil — Part 1: Soil denitrifying enzymes activities
ISO/CD 20131-2
Soil quality — Simple laboratory assessments for characterizing the denitrification in soil — Part 2: Assessment of the capacity of soils to reduce N2O
TC 204 Intelligent transport systems
ISO/CD 14817-3
Intelligent transport systems — ITS central data registry and data dictionaries — Part 3: Object identifier assignments for ITS data concepts
ISO/CD 18682 Intelligent transport systems — External hazard detection and notification systems — Basic requirements
ISO/DTR 19639
Electronic fee collection — Investigation of EFC standards for common payment schemes for multi-modal transport services
ISO/CD TR 20545
Intelligent transport systems — Vehicle/road-way warning and control systems — Report on standardisation for vehicle automated driving systems (RoVAS)/Beyond driver assistance systems
TC 211 Geographic information/Geomatics
ISO/CD 19160-4
Addressing — Part 4: International postal ad-dress components and template languages
TC 219 Floor coverings
ISO/CD 19322 Resilient floor coverings — Specification for floor coverings based on synthetic thermoplas-tic polymer
TC 228 Tourism and related services
ISO/CD 11121 Recreational diving services — Requirements for introductory training programmes to scuba diving
ISO/CD 24803 Recreational diving services — Requirements for recreational scuba diving service providers
TC 238 Solid biofuels
ISO/CD 18125 Solid biofuels — Determination of calorific value
ISO/CD 18847 Solid biofuels — Determination of particle density
TC 282 Water re-use
ISO/CD 20426 Risk and performance evaluation of water re-use systems — Guidelines for health risk as-sessment and treatment for water re-use
TC 292 Security (official starting date=2015-01-01)
ISO/DTS 22317
Societal security — Business continuity man-agement systems — Business impact analysis (BIA)
JTC 1 Information technology
ISO/IEC CD 14651
Information technology — International string ordering and comparison — Method for com-paring character strings and description of the common template tailorable ordering
ISO/IEC CD 7816-11
Identification cards — Integrated circuit cards — Part 11: Personal verification through biometric methods
ISO/IEC CD 19286
Identification cards — Integrated circuit cards — ICC protocols and services ensuring privacy
ISO/IEC PDTS 19841
C++ Extensions for Transactional Memory
ISO/IEC CD 30100-2
Information technology — Home network resource management — Part 2:
ISO/IEC CD 10116
Information technology — Security techniques — Modes of operation for an n-bit block cipher
ISO/IEC CD 14888-3
Information technology — Security techniques — Digital signatures with appendix — Part 3: Discrete logarithm based mechanisms
ISO/IEC CD 15946-1
Information technology — Security techniques — Cryptographic techniques based on elliptic curves — Part 1: General
ISO/IEC CD 18367
Cryptographic algorithms and security mecha-nisms conformance testing
ISO/IEC CD 20009-4
Information technology — Security techniques — Anonymous entity authentication — Part 4: Mechanisms based on weak secrets
ISO/IEC CD 27003
Information technology — Security techniques — Information security management system implementation guidance
ISO/IEC CD 27004
Information technology — Security tech-niques — Information security management — Measurement
ISO/IEC 23001-4:2014/PDAM 1
Information technology — MPEG systems technologies — Part 4: Codec configuration representation — Amendment 1: Parser Instan-tiation from BSD
ISO Update, Supplement to ISO Focus -- January 2015 3
ISO/IEC 23008-5/PDAM 1
Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 5: HEVC Conformance testing and reference software — Amendment 1: Reference software for format range exten-sions profiles
ISO/IEC 23008-5/PDAM 2
Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 5: HEVC Conformance testing and reference software — Amendment 2: Reference Software for the Multiview Main Profile of HEVC
ISO/IEC 23008-8/PDAM 1
Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 8: Conformance Speci-fication for HEVC — Amendment 1: Conform-ance testing for Multiview Main and 3D Main Profiles of HEVC
DIS circulated
Period from 01 December to 31 December 2014
These documents have obtained substantial support within the ap-propriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
Vote terminates
PC 272 Forensic sciences
ISO/DIS 18385.2
Minimizing the risk of human DNA contamination in prod-ucts used to collect, store and analyze biological material for forensic purposes
2015-03-06
PC 284 Management system for private security opera-tions - Requirements with guidance
ISO/DIS 18788 * Management system for private security operations — Require-ments with guidance
2015-03-11
TC 8 Ships and marine technology
ISO/DIS 17939 * Ships and marine technology — Oil tank hatches
ISO/DIS 17940 * Ships and marine technology — Hinged watertight doors
TC 20 Aircraft and space vehicles
ISO/DIS 17761 * Space environment (natural and artificial) — Model of high energy radiation at low altitudes (300-600 km)
2015-03-05
TC 21 Equipment for fire protec-tion and fire fighting
ISO/DIS 14520-1
* Gaseous fire-extinguishing sys-tems — Physical properties and system design — Part 1: General requirements
2015-03-09
(Revision of ISO/TS 20885:2003, ISO 14520-1:2006, ISO 14520-1:2006/Cor 1:2007)
TC 22 Road vehicles
ISO/DIS 18246 * Electrically propelled mopeds and motorcycles — Safety re-quirements for conductive con-nection to an external electric power supply
2015-02-18
TC 34 Food products
ISO/DIS 12824 * Royal jelly — Specifications
2015-03-16
ISO 5985:2002/DAmd 1
* Animal feeding stuffs — Determi-nation of ash insoluble in hydro-chloric acid — Amendment 1
2015-03-05
ISO/DIS 13904 * Animal feeding stuffs — Determi-nation of tryptophan content
2015-05-05
(Revision of ISO 13904:2005)
TC 35 Paints and varnishes
ISO/DIS 4629-1
* Binders for paints and varnishes — Determination of hydroxyl value — Titrimetric method — Part 1: Titrimetric method without using a catalyst
2015-05-19
(Revision of ISO 4629:1996)
ISO/DIS 4629-2
* Binders for paints and varnishes — Determination of hydroxyl value — Part 2: Titrimetric method using a catalyst
2015-05-19
TC 39 Machine tools
ISO/DIS 3070-2
* Machine tools — Test condi-tions for testing the accuracy of boring and milling machines with horizontal spindle — Part 2: Machines with movable column along the X-axis (floor type)
2015-03-21
(Revision of ISO 3070-2:2007)
TC 43 Acoustics
ISO/DIS 4869-2
* Acoustics — Hearing protectors — Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn
2015-05-05
(Revision of ISO 4869-2:1994, ISO 4869-2:1994/Cor 1:2006)
ISO/DIS 10140-1
* Acoustics — Laboratory meas-urement of sound insulation of building elements — Part 1: Application rules for specific products
2015-05-05
(Revision of ISO 10140-1:2010, ISO 10140-1:2010/Amd 1:2012, ISO 10140-1:2010/Amd 2:2014)
TC 44 Welding and allied processes
ISO/DIS 6848.2
Arc welding and cutting — Non-consumable tungsten electrodes — Classification
2015-02-05
(Revision of ISO 6848:2004)
4 ISO Update, Supplement to ISO Focus -- January 2015
ISO/DIS 15614-7.2
* Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 7: Overlay welding
2015-01-28
(Revision of ISO 15614-7:2007)
TC 46 Information and documentation
ISO/DIS 7098 * Information and documentation — Romanization of Chinese
(Revision of ISO 7098:1991)
TC 59 Buildings and civil engi-neering works
ISO/DIS 19861 * Buildings and civil engineering works — Sealants — Determina-tion of curing behavior
ISO/DIS 19862 * Buildings and civil engineering works — Sealants — Durabil-ity to extension compression cycling under accelerated weathering
ISO/DIS 19863 * Buildings and civil engineering works — Sealants — Determina-tion of tear resistance
TC 69 Applications of statistical methods
ISO/DIS 22514-4
* Statistical methods in process management — Capability and performance — Part 4: Process capability estimates and perfor-mance measures
2015-03-09
(Revision of ISO/TR 22514-4:2007)
ISO/DIS 18404 * Quantitative methods in process improvement — Six Sigma — Competencies for key person-nel and their organisation in relation to Six Sigma and Lean implementation
2015-03-11
TC 72 Textile machinery and accessories
ISO/DIS 11111-1
* Textile machinery — Safety requirements — Part 1: Common requirements
2015-05-05
(Revision of ISO 11111-1:2009)
ISO 11111-2:2005/DAmd 2
* Textile machinery — Safety requirements — Part 2: Spin-ning preparatory and spinning machines — Amendment 2
2015-05-05
ISO 11111-3:2005/DAmd 2
* Textile machinery — Safety re-quirements — Part 3: Nonwoven machinery — Amendment 2
2015-05-05
ISO 11111-4:2005/DAmd 2
* Textile machinery — Safety requirements — Part 4: Yarn processing, cordage and rope manufacturing machinery — Amendment 2
2015-05-05
ISO 11111-5:2005/DAmd 2
* Textile machinery — Safety requirements — Part 5: Prepara-tory machinery to weaving and knitting — Amendment 2
2015-05-05
ISO 11111-6:2005/DAmd 2
* Textile machinery — Safety requirements — Part 6: Fabric manufacturing machinery — Amendment 2
2015-05-05
ISO 11111-7:2005/DAmd 2
* Textile machinery — Safety re-quirements — Part 7: Dyeing and finishing machinery — Amend-ment 2
2015-05-05
TC 81 Common names for pesticides and other agrochemicals
ISO 1750:1981/DAmd 6
* Pesticides and other agro-chemicals — Common names — Amendment 6: Meptyldinocap
TC 83 Sports and other rec-reational facilities and equipment
ISO/DIS 20187 * Inflatable play equipment — Safety requirements and test methods
2015-03-05
TC 84 Devices for administration of medicinal products and catheters
ISO/DIS 7864 * Sterile hypodermic needles for single use — Requirements and test methods
2015-05-05
(Revision of ISO 7864:1993)
TC 85 Nuclear energy, nuclear technologies, and radio-logical protection
ISO/DIS 19017 * Guide for gamma spectrometry measurement of radioactive waste
TC 87 Cork
ISO/DIS 10718 * Cork stoppers — Characteriza-tion of a low in germ stopper, through the enumeration of colony-forming units of yeasts, moulds and bacteria, capable of both, being extracted and grow-ing in alcoholic medium
(Revision of ISO 10718:2002)
TC 96 Cranes
ISO/DIS 9926-3
* Cranes — Training of operators — Part 3: Tower cranes
2015-03-05
(Revision of ISO 9926-3:2005)
TC 104 Freight containers
ISO/DIS 9897-5
* Freight containers — Container equipment data exchange (CE-DEX) — Part 5: General commu-nication codes for chassis
2015-03-09
(Revision of ISO 9897:1997, ISO 9897:1997/Cor 1:2001)
TC 106 Dentistry
ISO/DIS 18556 * Dentistry — Intraoral spatulas
2015-05-19
TC 108 Mechanical vibration, shock and condition monitoring
ISO 8727:1997/DAmd 1
* Mechanical vibration and shock — Human exposure — Biody-namic coordinate systems — Amendment 1
2015-03-17
TC 110 Industrial trucks
ISO/DIS 10896-6
* Rough-terrain trucks — Safety requirements and verification — Part 6: Tilting operator's cabs
2015-03-09
ISO Update, Supplement to ISO Focus -- January 2015 5
ISO/DIS 11525-2.2
* Rough-terrain trucks — User requirements — Part 2: Slewing variable-reach trucks
2015-02-11
TC 133 Clothing sizing systems - size designation, size measurement methods and digital fittings
ISO/DIS 8559-2
* Size designation of clothes — Part 2: Primary and secondary dimension indicators
2015-03-21
TC 134 Fertilizers and soil conditioners
ISO/DIS 14820-1
* Fertilizers and liming materials — Sampling and sample prepara-tion — Part 1: Sampling
2015-03-05
ISO/DIS 14820-2
* Fertilizers and liming materi-als — Sampling and sample preparation — Part 2: Sample preparation
2015-03-05
ISO/DIS 15604 * Fertilizers — Determination of different forms of nitrogen in the same sample, containing nitro-gen as nitric, ammoniacal, urea and cyanamide nitrogen
2015-03-05
ISO/DIS 15958 * Fertilizers — Extraction of water soluble phosphorus
2015-03-05
ISO/DIS 15959 * Fertilizers — Determination of extracted phosphorus
2015-03-05
ISO/DIS 15960 * Fertilizers — Extraction of total calcium, total magnesium, total sodium and total sulfur in the forms of sulfates
2015-03-05
ISO/DIS 18642 * Fertilizer and soil conditioners — Fertilizer grade Urea — General requirements
2015-03-23
ISO/DIS 18643 * Fertilizers and soil condition-ers — Determination of biuret content of urea-based fertilizers — HPLC method
2015-03-23
ISO/DIS 18644 * Fertilizers and soil conditioners — Controlled release fertilizer — General requirements
2015-03-23
ISO/DIS 18645 * Fertilizers and soil condition-ers — Water soluble compound fertilizer — General requirements
2015-03-23
ISO/DIS 25475 * Fertilizers — Determination of ammoniacal nitrogen
2015-03-05
ISO/DIS 25705 * Fertilizers — Determination of urea condensates using high-performance liquid chromatog-raphy (HPLC) — Isobutyliden-ediurea and crotonylidenediurea (method A) and methylen-urea oligomers (method B)
2015-03-05
ISO/DIS 25749 * Fertilizers — Determination of sulfates content using three dif-ferent methods
2015-03-05
TC 163 Thermal performance and energy use in the built environment
ISO/DIS 12572 * Hygrothermal performance of building materials and products — Determination of water vapour transmission properties
2015-05-05
(Revision of ISO 12572:2001)
ISO/DIS 17738-1
* Thermal insulation products — Exterior insulation and finish systems — Part 1: Materials and systems
2015-03-09
TC 172 Optics and photonics
ISO/DIS 14880-1
* Optics and photonics — Micro-lens arrays — Part 1: Vocabulary
2015-05-05
(Revision of ISO 14880-1:2001, ISO 14880-1:2001/Cor 1:2003, ISO 14880-1:2001/Cor 2:2005)
TC 182 Geotechnics
ISO/DIS 17892-5
* Geotechnical investigation and testing — Laboratory testing of soil — Part 5: Incremental load-ing oedometer test
2015-05-19
(Revision of ISO/TS 17892-5:2004, ISO/TS 17892-5:2004/Cor 1:2006)
ISO/DIS 17892-6
* Geotechnical investigation and testing — Laboratory testing of soil — Part 6: Fall cone test
2015-05-19
(Revision of ISO/TS 17892-6:2004, ISO/TS 17892-6:2004/Cor 1:2006)
TC 188 Small craft
ISO/DIS 15085 * Small craft — Man-overboard prevention and recovery
2015-05-05
(Revision of ISO 15085:2003, ISO 15085:2003/Amd 1:2009)
TC 190 Soil quality
ISO/DIS 18400-101
* Soil quality — Sampling — Part 101: Framework for the preparation and application of a sampling plan
2015-03-05
ISO/DIS 18400-102
* Soil quality — Sampling — Part 102: Selection and application of sampling techniques
2015-03-05
ISO/DIS 18400-103
* Soil quality — Sampling — Part 103: Safety
2015-03-05
ISO/DIS 18400-105
* Soil quality — Sampling — Part 105: Packaging, transport, stor-age and preservation of samples
2015-03-05
ISO/DIS 18400-106
* Soil quality — Sampling — Part 106: Quality control and quality assurance
2015-03-05
ISO/DIS 18400-107
* Soil quality — Sampling — Part 107: Recording and reporting
2015-03-05
ISO/DIS 18400-201
* Soil quality — Sampling — Part 201: Physical pretreatment in the field
2015-03-05
6 ISO Update, Supplement to ISO Focus -- January 2015
TC 204 Intelligent transport systems
ISO/DIS 14813-1.2
* Intelligent transport systems — Reference model architecture(s) for the ITS sector — Part 1: ITS service domains, service groups and services
(Revision of ISO 14813-1:2007)
TC 206 Fine ceramics
ISO/DIS 17841 * Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for thermal fatigue of fine ceramics substrate
2015-03-21
TC 219 Floor coverings
ISO/DIS 18168 * Textile floor coverings — Colour fastness to shampooing
2015-03-17
TC 220 Cryogenic vessels
ISO/DIS 21028-2
* Cryogenic vessels — Toughness requirements for materials at cryogenic temperature — Part 2: Temperatures between -80 degrees C and -20 degrees C
2015-05-19
(Revision of ISO 21028-2:2004)
JTC 1 Information technology
ISO/IEC DIS 29341-12-1
* Information technology — UPnP Device Architecture — Part 12-1: Remote User Interface Device Control Protocol - Remote User Interface Client Device
2015-03-05
(Revision of ISO/IEC 29341-12-1:2008)
ISO/IEC DIS 29341-12-2
* Information technology — UPnP Device Architecture — Part 12-2: Remote User Interface Device Control Protocol — Remote User Interface Server Device
2015-03-05
(Revision of ISO/IEC 29341-12-2:2008)
ISO/IEC DIS 29341-3-10
* Information technology — UPnP Device Architecture — Part 3-10: Audio Video Device Control Pro-tocol — Audio Video Transport Service
2015-03-05
(Revision of ISO/IEC 29341-3-10:2008)
ISO/IEC DIS 29341-7-11
* Information technology — UPnP Device Architecture — Part 7-11: Lighting Device Control Protocol — Switch Power Service
2015-03-05
(Revision of ISO/IEC 29341-7-11:2008)
ISO/IEC DIS 29341-12-10
* Information technology — UPnP Device Architecture — Part 12-10: Remote User Interface De-vice Control Protocol — Remote User Interface Client Service
2015-03-05
(Revision of ISO/IEC 29341-12-10:2008)
ISO/IEC DIS 29341-12-11
* Information technology — UPnP Device Architecture — Part 12-11: Remote User Interface De-vice Control Protocol - Remote User Interface Server Service
2015-03-05
(Revision of ISO/IEC 29341-12-11:2008)
ISO/IEC DIS 15026-3
* Systems and software engineer-ing — Systems and software assurance — Part 3: System integrity levels
2015-03-21
(Revision of ISO/IEC 15026-3:2011)
ISO/IEC DIS 7816-15
* Identification cards — Integrated circuit cards — Part 15: Crypto-graphic information application
(Revision of ISO/IEC 7816-15:2004, ISO/IEC 7816-15:2004/Amd 1:2007, ISO/IEC 7816-15:2004/Cor 1:2004, ISO/IEC 7816-15:2004/Amd 2:2008)
ISO/IEC DIS 11694-3
* Identification cards — Optical memory cards — Linear record-ing method — Part 3: Optical properties and characteristics
(Revision of ISO/IEC 11694-3:2008)
ISO/IEC DIS 17825
* Information technology — Se-curity technique — Testing methods for the mtigation of non-invasive attack classes against cryptographic modules
ISO/IEC 14496-5:2001/DAmd 36
* Information technology — Cod-ing of audio-visual objects — Part 5: Reference software — Amendment 36: Pattern-based 3D mesh coding reference software
2015-03-17
ISO/IEC 14496-27:2009/DAmd 6
* Information technology — Coding of audio-visual ob-jects — Part 27: 3D Graphics conformance — Amendment 6: Pattern-based 3D mesh coding conformance
2015-03-17
ISO/IEC DIS 19757-3
* Information technology — Docu-ment Schema Definition Lan-guages (DSDL) — Part 3: Rule-based validation — Schematron
(Revision of ISO/IEC 19757-3:2006)
ISO/IEC DIS 30106-1
* Information technology — Bio-API for object oriented program-ming languages — Part 1: Architecture
2015-03-05
ISO/IEC DIS 30106-2
* Information Technology — Ob-ject oriented BioAPI — Part 2: Java implementation
2015-03-05
ISO/IEC DIS 30106-3
* Information Technology — Ob-ject oriented BioAPI — Part 3: C# implementation
2015-03-05
FDIS circulated
Period from 01 December to 31 December 2014
These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown
* Available in English only
Vote terminates
TC 6 Paper, board and pulps
ISO Update, Supplement to ISO Focus -- January 2015 7
ISO/FDIS 16260
* Paper and board — Determina-tion of internal bond strength
2015-02-17
TC 22 Road vehicles
ISO/FDIS 15118-3
* Road vehicles — Vehicle to grid communication interface — Part 3: Physical and data link layer requirements
2015-02-06
TC 24 Particle characterization including sieving
ISO/FDIS 17867
* Particle size analysis — Small-angle X-ray scattering
2015-02-10
TC 27 Solid mineral fuels
ISO/FDIS 602 * Coal — Determination of mineral matter
2015-02-10
(Revision of ISO 602:1983)
TC 28 Petroleum products and re-lated products of synthetic or biological origin
ISO/FDIS 16861
* Petroleum products — Fuels (class F) — Specifications of dimethyl ether (DME)
TC 37 Terminology and other language and content resources
ISO/FDIS 17100
* Translation Services — Require-ments for translation services
2015-02-19
TC 44 Welding and allied processes
ISO 2503:2009/FDAmd 1
* Gas welding equipment — Pres-sure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa) — Amendment 1
2015-02-05
ISO 5172:2006/FDAmd 2
* Gas welding equipment — Blow-pipes for gas welding, heating and cutting — Specifications and tests — Amendment 2
2015-02-05
ISO 7291:2010/FDAmd 1
* Gas welding equipment — Pres-sure regulators for manifold systems used in welding, cutting and allied processes up to 30 MPa (300 bar) — Amendment 1
2015-02-05
TC 58 Gas cylinders
ISO 13341:2010/FDAmd 1
* Gas cylinders — Fitting of valves to gas cylinders — Amendment 1
2015-02-12
TC 67 Materials, equipment and offshore structures for pe-troleum, petrochemical and natural gas industries
ISO/FDIS 15551-1
* Petroleum and natural gas indus-tries — Drilling and production equipment — Part 1: Electric submersible pump systems for artificial lift
2015-02-05
TC 71 Concrete, reinforced concrete and pre-stressed concrete
ISO/FDIS 18319
* Fibre-reinforced polymer (FRP) reinforcement for concrete structures — Specifications of FRP sheets
2015-02-18
TC 94 Personal safety -- Pro-tective clothing and equipment
ISO/FDIS 11611
* Protective clothing for use in welding and allied processes
2015-02-19
(Revision of ISO 11611:2007)
ISO/FDIS 14116
* Protective clothing — Protection against flame — Limited flame spread materials, material as-semblies and clothing
2015-02-19
(Revision of ISO 14116:2008, ISO 14116:2008/Cor 1:2009)
ISO/FDIS 16900-8
* Respiratory protective devices — Methods of test and test equip-ment — Part 8: Measurement of RPD air flow rates of assisted filtering RPD
2015-02-16
TC 96 Cranes
ISO/FDIS 9942-1
* Cranes — Information labels — Part 1: General
2015-02-17
(Revision of ISO 9942-1:1994)
TC 134 Fertilizers and soil conditioners
ISO/FDIS 17322
* Fertilizers and soil conditioners — Analytical methods for Sulfur Coated Urea (SCU)
2015-02-18
ISO/FDIS 17323
* Fertilizers and soil conditioners — Sulfur Coated Urea (SCU) — General requirements
2015-02-18
TC 135 Non-destructive testing
ISO/FDIS 18490
* Non-destructive testing — Evalu-ation of vision acuity of NDT personnel
2015-02-12
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO/FDIS 18851
* Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test method to prove the structural design of fittings
2015-02-03
TC 150 Implants for surgery
ISO/FDIS 16061
* Instrumentation for use in association with non-active surgical implants — General requirements
2015-02-12
(Revision of ISO 16061:2008)
TC 172 Optics and photonics
ISO/FDIS 16971
* Ophthalmic instruments — Opti-cal coherence tomograph for the posterior segment of the human eye
2015-02-09
TC 188 Small craft
ISO 10240:2004/FDAmd 1
* Small craft — Owner's manual — Amendment 1
2015-02-12
8 ISO Update, Supplement to ISO Focus -- January 2015
ISO/FDIS 18854
* Small craft — Reciprocating internal combustion engines exhaust emission measurement — Test-bed measurement of gaseous and particulate exhaust emissions
2015-02-19
TC 210 Quality management and corresponding general as-pects for medical devices
IEC/FDIS 62366-1
Medical devices — Part 1: Ap-plication of usability engineering to medical devices
2015-01-31
(Revision of IEC 62366:2007, IEC 62366:2007/Amd 1:2014)
ISO/FDIS 80369-20
* Small-bore connectors for liquids and gases in healthcare applica-tions — Part 20: Common test methods
2015-02-05
TC 213 Dimensional and geometri-cal product specifications and verification
ISO/FDIS 16610-60
* Geometrical Product Specifica-tion (GPS) — Filtration — Part 60: Linear areal filters — Basic concepts
2015-02-12
TC 216 Footwear
ISO/FDIS 10750
* Footwear — Test method for slide fasteners — Attachment strength of end stops
2015-02-05
TC 226 Materials for the produc-tion of primary aluminium
ISO/FDIS 15379-1
* Carbonaceous materials for the production of aluminium — Cathode block materials — Part 1: Determination of the expan-sion due to sodium penetration with application of pressure
2015-02-18
(Revision of ISO 15379-1:2004)
ISO/FDIS 15379-2
* Carbonaceous materials for the production of aluminium — Cathode block materials — Part 2: Determination of the expan-sion due to sodium penetration without application of pressure
2015-02-18
(Revision of ISO 15379-2:2004)
JTC 1 Information technology
ISO/IEC 14496-5:2001/FDAmd 33
* Information technology — Cod-ing of audio-visual objects — Part 5: Reference software — Amendment 33: Reference software for MVC plus depth extension of AVC
2015-02-03
ISO/IEC FDIS 23008-2
* Information technology — High efficiency coding and media de-livery in heterogeneous environ-ments — Part 2: High efficiency video coding
2015-02-09
(Revision of ISO/IEC 23008-2:2013)
ISO/IEC FDIS 23008-10
* Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 10: MPEG Media Transport Forward Error Correction (FEC) codes
2015-02-09
Standards published
New International Standards published between 01 December and 31 December 2014
* Available in English only
** French version of standard previously published in English only
Price
group
COPOLCO Committee on consumer policy
ISO/IEC Guide 50:2014
* Safety aspects — Guidelines for child safety in standards and other specifications
F
PC 271 Compliance management systems
ISO 19600:2014
* Compliance management systems — Guidelines
E
TC 8 Ships and marine technology
ISO/PAS 19697:2014
* Ships and marine technology — Navi-gation and ship operations — Elec-tronic inclinometers
D
TC 17 Steel
ISO 4996:2014 * Hot-rolled steel sheet of high yield stress structural quality
B
TC 20 Aircraft and space vehicles
ISO 15845:2014
* Aircraft ground equipment - Board-ing vehicle for persons with reduced mobility - Functional and safety requirements
D
TC 21 Equipment for fire protection and fire fighting
ISO 7240-8:2014
* Fire detection and alarm systems — Part 8: Point-type fire detectors using a carbon monoxide sensor in combina-tion with a heat sensor
G
ISO 6182-12:2014
* Fire protection — Automatic sprinkler systems — Part 12: Requirements and test methods for grooved-end compo-nents for steel pipe systems
C
TC 23 Tractors and machinery for agri-culture and forestry
ISO 16119-4:2014
Agricultural and forestry machinery — Environmental requirements for spray-ers — Part 4: Fixed and semi-mobile sprayers
D
ISO 9635-5:2014
* Agricultural irrigation equipment — Ir-rigation valves — Part 5: Control valves
C
ISO Update, Supplement to ISO Focus -- January 2015 9
ISO 24631-5:2014
Radio frequency identification of animals — Part 5: Procedure for testing the capability of RFID transceivers of reading ISO 11784 and ISO 11785 transponders
B
TC 27 Solid mineral fuels
ISO/TS 18806:2014
* Solid mineral fuels — Determination of Chlorine content
B
TC 28 Petroleum products and related products of synthetic or biologi-cal origin
ISO 26422:2014
* Petroleum and related products — Determination of shear stability of lubricating oils containing polymers — Method using a tapered roller bearing
B
TC 29 Small tools
ISO 12164-3:2014
Hollow taper interface with flange contact surface — Part 3: Dimensions of shanks for stationary tools
B
ISO 12164-4:2014
Hollow taper interface with flange contact surface — Part 4: Dimensions of receivers for stationary tools
A
ISO 3919:2005/Amd 1:2014
Coated abrasives — Flap wheels with shaft — Amendment 1
XZ
TC 34 Food products
ISO 18301:2014
Animal and vegetable fats and oils — Determination of conventional mass per volume (litre weight in air) — Oscil-lating U-tube method
B
ISO 11136:2014
* Sensory analysis — Methodology — General guidance for conducting hedonic tests with consumers in a controlled area
F
TC 37 Terminology and other language and content resources
ISO 24617-7:2014
* Language resource management — Semantic annotation framework — Part 7: Spatial information (ISOspace)
G
TC 39 Machine tools
ISO 10791-6:2014
Test conditions for machining centres — Part 6: Accuracy of speeds and interpolations
F
TC 45 Rubber and rubber products
ISO 1656:2014 Rubber, raw natural, and rubber latex, natural — Determination of nitrogen content
D
ISO 2005:2014 * Rubber latex, natural, concentrate — Determination of sludge content
A
ISO 2302:2014 Isobutene-isoprene rubber (IIR) — Evaluation procedure
B
ISO 4097:2014 Rubber, ethylene-propylene-diene (EPDM) — Evaluation procedure
C
ISO 4659:2014 Styrene-butadiene rubber (carbon black or carbon black and oil master-batches) — Evaluation procedure
B
ISO 7663:2014 Halogenated isobutene-isoprene rubber (BIIR and CIIR) — Evaluation procedures
B
TC 67 Materials, equipment and off-shore structures for petroleum, petrochemical and natural gas industries
ISO 12736:2014
Petroleum and natural gas industries — Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures
G
ISO 19901-3:2014
* Petroleum and natural gas industries — Specific requirements for offshore structures — Part 3: Topsides structure
H
TC 70 Internal combustion engines
ISO 7967-11:2014
* Reciprocating internal combustion engines — Vocabulary of components and systems — Part 11: Fuel systems
D
TC 84 Devices for administration of medicinal products and catheters
ISO 11608-1:2014
Needle-based injection systems for medical use — Requirements and test methods — Part 1: Needle-based injection systems
F
TC 92 Fire safety
ISO/TR 17755:2014
Fire safety — Overview of national fire statistics practices
H
ISO 17554:2014
Reaction to fire tests — Mass loss measurement
D
ISO 10294-1:1996/Amd 1:2014
* Fire resistance tests — Fire dampers for air distribution systems — Part 1: Test method — Amendment 1
XZ
ISO 10294-4:2001/Amd 1:2014
* Fire resistance tests — Fire dampers for air distribution systems — Part 4: Test of thermal release mechanism — Amendment 1: Specific perfor-mance requirement for thermal release mechanism based upon performance of thermal release mechanism used in ISO 10294-1 test specimen
XZ
TC 110 Industrial trucks
ISO 22915-22:2014
Industrial trucks — Verification of stability — Part 22: Lateral- and front-stacking trucks with and without elevating operator position
B
TC 130 Graphic technology
ISO 15341:2014
* Graphic technology — Method for ra-dius determination of printing cylinders
C
ISO 16684-2:2014
* Graphic technology — Extensible metadata platform (XMP) — Part 2: Description of XMP schemas using RELAX NG
F
10 ISO Update, Supplement to ISO Focus -- January 2015
ISO 16760:2014
* Graphic technology — Prepress data exchange — Preparation and visualiza-tion of RGB images to be used in RGB-based graphics arts workflows
F
TC 131 Fluid power systems
ISO 11500:2008
Hydraulic fluid power — Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle
E
TC 145 Graphical symbols
ISO 7010:2011/Amd 6:2014
* Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 6
XZ
TC 147 Water quality
ISO 5667-14:2014
* Water quality — Sampling — Part 14: Guidance on quality assurance and quality control of environmental water sampling and handling
E
TC 154 Processes, data elements and documents in commerce, indus-try and administration
ISO 9735-10:2014
* Electronic data interchange for ad-ministration, commerce and transport (EDIFACT) — Application level syntax rules (Syntax version number: 4, Syntax release number: 2) — Part 10: Syntax service directories
H
TC 171 Document management applications
ISO 12651-2:2014
* Electronic document management — Vocabulary — Part 2: Workflow management
B
ISO 14289-1:2014
* Document management applications — Electronic document file format enhancement for accessibility — Part 1: Use of ISO 32000-1 (PDF/UA-1)
C
ISO 14739-1:2014
* Document management — 3D use of Product Representation Compact (PRC) format — Part 1: PRC 10001
H
TC 172 Optics and photonics
ISO 8039:2014 * Microscopes — Values, tolerances and symbols for magnification
A
TC 173 Assistive products for persons with disability
ISO 16840-10:2014
Wheelchairs — Resistance to igni-tion of non-integrated seat and back support cushions — Part 10: Require-ments and test methods
C
TC 174 Jewellery
ISO 11426:2014
* Jewellery — Determination of gold in gold jewellery alloys — Cupellation method (fire assay)
B
ISO 15096:2014
* Jewellery — Determination of silver in 999 0/00 silver jewellery alloys — Dif-ference method using ICP-OES
A
TC 181 Safety of toys
ISO 8124-1:2014
* Safety of toys — Part 1: Safety aspects related to mechanical and physical properties
H
TC 184 Automation systems and integration
ISO 10303-41:2014
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 41: Inte-grated generic resource: Fundamentals of product description and support
B
ISO 10303-42:2014
* Industrial automation systems and integration — Product data repre-sentation and exchange — Part 42: Integrated generic resource: Geometric and topological representation
B
ISO 10303-44:2014
* Industrial automation systems and integration — Product data repre-sentation and exchange — Part 44: Integrated generic resource: Product structure configuration
B
ISO 10303-45:2014
* Industrial automation systems and integration — Product data repre-sentation and exchange — Part 45: Integrated generic resource: Material and other engineering properties
B
ISO 10303-47:2014
* Industrial automation systems and integration — Product data repre-sentation and exchange — Part 47: Integrated generic resource: Shape variation tolerances
B
ISO 10303-50:2002/Cor 2:2014
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 50: Inte-grated generic resource: Mathematical constructs — Technical Corrigendum 2
free
ISO 10303-52:2011/Cor 1:2014
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 52: Inte-grated generic resource: Mesh-based topology — Technical Corrigendum 1
free
ISO 10303-59:2014
* Industrial automation systems and integration — Product data repre-sentation and exchange — Part 59: Integrated generic resource — Quality of product shape data
B
ISO 10303-101:2014
* Industrial automation systems and inte-gration — Product data representation and exchange — Part 101: Integrated application resource: Draughting
B
ISO 10303-104:2000/Cor 2:2014
* Industrial automation systems and integration — Product data repre-sentation and exchange — Part 104: Integrated application resource: Finite element analysis — Technical Cor-rigendum 2
free
ISO 10303-105:2014
* Industrial automation systems and inte-gration — Product data representation and exchange — Part 105: Integrated application resource: Kinematics
B
ISO 10303-108:2005/Cor 2:2014
* Industrial automation systems and integration — Product data representa-tion and exchange — Part 108: Inte-grated application resource: Param-eterization and constraints for explicit geometric product models — Technical Corrigendum 2
free
ISO 10303-109:2004/Cor 2:2014
* Industrial automation systems and integration — Product data repre-sentation and exchange — Part 109: Integrated application resource: Kinematic and geometric constraints for assembly models — Technical Cor-rigendum 2
free
ISO Update, Supplement to ISO Focus -- January 2015 11
ISO 10303-111:2007/Cor 2:2014
* Industrial automation systems and integration — Product data representa-tion and exchange — Part 111: Inte-grated application resource : Elements for the procedural modelling of solid shapes — Technical Corrigendum 2
free
ISO 10303-209:2014
* Industrial automation systems and integration — Product data repre-sentation and exchange — Part 209: Application protocol: Multidisciplinary analysis and design
H
ISO 10303-210:2014
* Industrial automation systems and integration — Product data representa-tion and exchange — Part 210: Ap-plication protocol: Electronic assembly, interconnect and packaging design
H
ISO 10303-242:2014
* Industrial automation systems and integration — Product data repre-sentation and exchange — Part 242: Application protocol: Managed model-based 3D engineering
H
ISO/TS 10303-409:2014
* Industrial automation systems and integration — Product data representa-tion and exchange — Part 409: Appli-cation module: AP209 multidisciplinary analysis and design
B
ISO/TS 10303-410:2014
* Industrial automation systems and integration — Product data repre-sentation and exchange — Part 410: Application module: AP210 electronic assembly interconnect and packaging design
B
ISO/TS 10303-442:2014
* Industrial automation systems and integration — Product data repre-sentation and exchange — Part 442: Application module: AP242 managed model based 3D engineering
B
ISO 10303-518:2014
* Industrial automation systems and integration — Product data representa-tion and exchange — Part 518: Appli-cation interpreted construct: Mechani-cal design shaded presentation
B
ISO 10303-522:2014
* Industrial automation systems and integration — Product data representa-tion and exchange — Part 522: Appli-cation interpreted construct: Machining features
B
ISO/TS 10303-1051:2014
* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1051: Appli-cation module: Geometric tolerance
B
ISO/TS 10303-1127:2014
* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1127: Ap-plication module: File identification
B
ISO/TS 10303-1142:2014
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1142: Application module: Requirement view definition relationship
B
ISO/TS 10303-1603:2014
* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1603: Ap-plication module: Analytical model
B
ISO/TS 10303-1636:2014
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1636: Application module: Assembly module design
B
ISO/TS 10303-1642:2014
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1642: Application module: Assembly module usage view
B
ISO/TS 10303-1650:2014
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1650: Application module: Bare die
B
ISO/TS 10303-1686:2014
* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1686: Ap-plication module: Interconnect module usage view
B
ISO/TS 10303-1698:2014
* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1698: Ap-plication module: Layered interconnect module design
B
ISO/TS 10303-1706:2014
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1706: Application module: Non feature shape element
B
ISO/TS 10303-1707:2014
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1707: Application module: Package
B
ISO/TS 10303-1718:2014
* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1718: Ap-plication module: Layered interconnect simple template
B
ISO/TS 10303-1803:2014
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 1803: Application module: Process plan
B
ISO/TS 10303-3001:2014
* Industrial automation systems and integration — Product data representa-tion and exchange — Part 3001: Busi-ness object model: Managed model based 3d engineering
B
ISO 13584-20:1998/Cor 1:2014
* Industrial automation systems and integration — Parts library — Part 20: Logical resource: Logical model of ex-pressions — Technical Corrigendum 1
free
TC 188 Small craft
ISO 13297:2014
Small craft — Electrical systems — Alternating current installations
E
TC 207 Environmental management
ISO/TS 14072:2014
Environmental management — Life cy-cle assessment — Requirements and guidelines for organizational life cycle assessment
E
TC 212 Clinical laboratory testing and in vitro diagnostic test systems
ISO/TS 17822-1:2014
* In vitro diagnostic test systems — Qualitative nucleic acid-based in vitro examination procedures for detection and identification of microbial patho-gens — Part 1: General requirements, terms and definitions
D
TC 213 Dimensional and geometrical product specifications and verification
12 ISO Update, Supplement to ISO Focus -- January 2015
ISO 2692:2014 Geometrical product specifications (GPS) — Geometrical tolerancing — Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
F
TC 215 Health informatics
ISO/TS 13131:2014
* Health informatics — Telehealth ser-vices — Quality planning guidelines
E
ISO/TR 28380-3:2014
* Health informatics — IHE global stand-ards adoption — Part 3: Deployment
C
IEC/TR 80001-2-5:2014
* Application of risk management for IT-networks incorporating medical devices — Part 2-5: Application guid-ance — Guidance for distributed alarm systems
E
TC 218 Timber
ISO 13061-1:2014
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 1: Determina-tion of moisture content for physical and mechanical tests
A
ISO 13061-2:2014
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 2: Deter-mination of density for physical and mechanical tests
A
ISO 13061-3:2014
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 3: Determi-nation of ultimate strength in static bending
A
ISO 13061-4:2014
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 4: Determina-tion of modulus of elasticity in static bending
A
ISO 13061-6:2014
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 6: Determina-tion of ultimate tensile stress parallel to grain
A
ISO 13061-7:2014
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 7: Determina-tion of ultimate tensile stress perpen-dicular to grain
A
ISO 17959:2014
* General requirements for solid wood flooring
C
TC 219 Floor coverings
ISO 24338:2014
* Laminate floor coverings — Determina-tion of abrasion resistance
D
TC 221 Geosynthetics
ISO 13427:2014
Geosynthetics — Abrasion damage simulation (sliding block test)
B
TC 223 Societal security
ISO 22315:2014
* Societal security — Mass evacuation — Guidelines for planning
D
TC 242 Energy Management
ISO 50003:2014
Energy management systems — Re-quirements for bodies providing audit and certification of energy manage-ment systems
C
ISO 50004:2014
* Energy management systems — Guid-ance for the implementation, mainte-nance and improvement of an energy management system
F
ISO 50006:2014
* Energy management systems — Meas-uring energy performance using energy baselines (EnB) and energy perfor-mance indicators (EnPI) — General principles and guidance
E
ISO 50015:2014
Energy management systems — Meas-urement and verification of energy performance of organizations — Gen-eral principles and guidance
D
TMBG Technical Management Board - groups
IWA 17:2014 * Information and operations security and integrity requirements for lottery and gaming organizations
C
JTC 1 Information technology
ISO/IEC TR 29181-2:2014
* Information technology — Future Network — Problem statement and requirements — Part 2: Naming and addressing
F
ISO/IEC TR 29181-5:2014
* Information technology — Future Network — Problem statement and requirements — Part 5: Security
A
ISO/IEC 90003:2014
* Software engineering — Guidelines for the application of ISO 9001:2008 to computer software
G
ISO/IEC 24775-5:2014
* Information technology — Storage management — Part 5: File systems
H
ISO/IEC 24775-6:2014
* Information technology — Storage management — Part 6: Fabric
H
ISO/IEC 24775-7:2014
* Information technology — Storage management — Part 7: Host Elements
H
ISO/IEC 24775-8:2014
* Information technology — Storage management — Part 8: Media Libraries
H
ISO/IEC 19763-10:2014
* Information technology — Metamodel framework for interoperability (MFI) — Part 10: Core model and basic mapping
E
ISO/IEC 24752-1:2014
* Information technology — User inter-faces — Universal remote console — Part 1: General framework
F
ISO/IEC 24752-2:2014
* Information technology — User interfaces — Universal remote con-sole — Part 2: User interface socket description
F
ISO/IEC 24752-4:2014
* Information technology — User inter-faces — Universal remote console — Part 4: Target description
D
ISO Update, Supplement to ISO Focus -- January 2015 13
ISO/IEC 24752-5:2014
* Information technology — User inter-faces — Universal remote console — Part 5: Resource description
E
ISO/IEC 24752-6:2014
* Information technology — User inter-faces — Universal remote console — Part 6: Web service integration
G
Standards confirmed
The following International Standards are confimred for a five year period:
TC 5 Ferrous metal pipes and metallic fittings
ISO 4179:2005 (reconfirmed)
ISO 6594:2006 (reconfirmed)
ISO 16134:2006 (reconfirmed)
TC 8 Ships and marine technology
ISO 16273:2003 (reconfirmed)
TC 20 Aircraft and space vehicles
ISO 2046:1973 (reconfirmed)
ISO 2434:1973 (reconfirmed)
ISO 2435:1973 (reconfirmed)
ISO 15862:2009
ISO 15863:2003 (reconfirmed)
TC 22 Road vehicles
ISO 16833:2006 (reconfirmed)
ISO 6726:1988 (reconfirmed)
ISO 8644:2006 (reconfirmed)
ISO 9021:1988 (reconfirmed)
ISO 9129:2008
ISO 9130:2005 (reconfirmed)
ISO 11486:2006 (reconfirmed)
ISO 13232-1:2005 (reconfirmed)
ISO 13232-2:2005 (reconfirmed)
ISO 13232-3:2005 (reconfirmed)
ISO 13232-4:2005 (reconfirmed)
ISO 13232-6:2005 (reconfirmed)
ISO 13232-7:2005 (reconfirmed)
ISO 13232-8:2005 (reconfirmed)
TC 23 Tractors and machinery for agriculture and forestry
ISO 21299:2009
ISO 11806-1:2011
ISO 11806-2:2011
TC 29 Small tools
ISO 3002-2:1982 (reconfirmed)
ISO 3002-3:1984 (reconfirmed)
TC 34 Food products
ISO 21415-4:2006 (reconfirmed)
ISO 21569:2005 (reconfirmed)
TC 38 Textiles
ISO 105-A02:1993 (reconfirmed)
ISO 105-A03:1993 (reconfirmed)
ISO 9867:2009
ISO 23232:2009
TC 39 Machine tools
ISO 230-4:2005 (reconfirmed)
ISO 2773-1:1973 (reconfirmed)
ISO 2773-2:1973 (reconfirmed)
ISO 6155:1998 (reconfirmed)
ISO 10791-3:1998 (reconfirmed)
ISO 10791-4:1998 (reconfirmed)
ISO 10791-5:1998 (reconfirmed)
ISO 13041-3:2009
ISO 13041-6:2009
TC 43 Acoustics
ISO 389-2:1994 (reconfirmed)
ISO 389-5:2006 (reconfirmed)
ISO 389-9:2009
ISO 8253-2:2009
ISO 16832:2006 (reconfirmed)
TC 44 Welding and allied processes
ISO 3580:2010
ISO 14171:2010
ISO 14341:2010
ISO 14344:2010
ISO 15792-1:2000 (reconfirmed)
ISO 15792-2:2000 (reconfirmed)
ISO 17633:2010
ISO 18274:2010
ISO 24034:2010
ISO 5822:1988 (reconfirmed)
ISO 5827:1983 (reconfirmed)
TC 46 Information and documentation
ISO 15836:2009
ISO 4:1997 (reconfirmed)
ISO 10324:1997 (reconfirmed)
TC 58 Gas cylinders
ISO 22435:2007
ISO 20703:2006 (reconfirmed)
ISO 11755:2005 (reconfirmed)
ISO 21007-1:2005 (reconfirmed)
TC 59 Buildings and civil engineering works
ISO 7162:1992 (reconfirmed)
TC 60 Gears
IEC 61400-4:2012
TC 72 Textile machinery and accessories
ISO 93-1:2006 (reconfirmed)
ISO 93-2:2006 (reconfirmed)
ISO 368:2006 (reconfirmed)
ISO 5234:2005 (reconfirmed)
ISO 9947:2005 (reconfirmed)
TC 83 Sports and other recreational facilities and equipment
ISO 11497:1998 (reconfirmed)
14 ISO Update, Supplement to ISO Focus -- January 2015
ISO 22264:2006 (reconfirmed)
TC 98 Bases for design of structures
ISO 23469:2005 (reconfirmed)
TC 102 Iron ore and direct reduced iron
ISO 5418-1:2006 (reconfirmed)
ISO 5418-2:2006 (reconfirmed)
ISO 7764:2006 (reconfirmed)
ISO 9517:2007 (reconfirmed)
ISO 9682-2:2006 (reconfirmed)
ISO 9683-1:2006 (reconfirmed)
ISO 9685:1991 (reconfirmed)
ISO 11534:2006 (reconfirmed)
ISO 11535:2006 (reconfirmed)
ISO 16042:2007 (reconfirmed)
TC 106 Dentistry
ISO 3630-4:2009
TC 107 Metallic and other inorganic coatings
ISO 14923:2003 (reconfirmed)
ISO 14924:2005 (reconfirmed)
ISO 16348:2003 (reconfirmed)
ISO 21968:2005 (reconfirmed)
ISO 4525:2003 (reconfirmed)
ISO 4526:2004 (reconfirmed)
ISO 4527:2003 (reconfirmed)
ISO 12683:2004 (reconfirmed)
TC 108 Mechanical vibration, shock and condi-tion monitoring
ISO 2041:2009
TC 121 Anaesthetic and respiratory equipment
ISO 10651-5:2006 (reconfirmed)
ISO 26782:2009
ISO 80601-2-56:2009
TC 155 Nickel and nickel alloys
ISO 11433:1993 (reconfirmed)
TC 165 Timber structures
ISO 10984-1:2009
ISO 10984-2:2009
TC 173 Assistive products for persons with disability
ISO 9949-1:1993 (reconfirmed)
ISO 9949-2:1993 (reconfirmed)
ISO 9949-3:1993 (reconfirmed)
TC 190 Soil quality
ISO 23161:2009
TC 210 Quality management and correspond-ing general aspects for medical devices
ISO/TS 19218-1:2011
TC 216 Footwear
ISO 17702:2003 (reconfirmed)
ISO 17703:2003 (reconfirmed)
ISO 17705:2003 (reconfirmed)
ISO 17706:2003 (reconfirmed)
ISO 17709:2004 (reconfirmed)
ISO 20864:2004 (reconfirmed)
ISO 22651:2002 (reconfirmed)
ISO 22653:2003 (reconfirmed)
ISO 22774:2004 (reconfirmed)
ISO 22775:2004 (reconfirmed)
ISO 22776:2004 (reconfirmed)
ISO 22777:2004 (reconfirmed)
JTC 1 Information technology
ISO/IEC 15408-2:2008
ISO/IEC 15408-3:2008
ISO/IEC TR 15446:2009
ISO/IEC 18014-1:2008
ISO/IEC 18045:2008
ISO/IEC 19772:2009
Standards withdrawn
Period from 01 December to 31 December 2014
TC 6 Paper, board and pulps
ISO 4046-1:2002 (replaced by )
ISO 4046-2:2002 (replaced by )
ISO 4046-3:2002 (replaced by )
ISO 4046-4:2002 (replaced by )
ISO 4046-5:2002 (replaced by )
TC 8 Ships and marine technology
ISO 3913:1977 (replaced by )
ISO 3913:1977/Add 1:1980
(replaced by )
TC 18 Zinc and zinc alloys
ISO 1976:1975 (replaced by )
TC 34 Food products
ISO 7586:1985 (replaced by )
TC 43 Acoustics
ISO 11094:1991 (replaced by )
TC 69 Applications of statistical methods
ISO 7873:1993 (replaced by )
TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO 921:1997 (replaced by )
TC 126 Tobacco and tobacco products
ISO 10185:2004 (replaced by )
TC 129 Aluminium ores
ISO 6606:1986 (replaced by )
TC 184 Automation systems and integration
ISO 10303-201:1994
(replaced by ISO 10303-242:2014)
ISO Update, Supplement to ISO Focus -- January 2015 15
ISO 10303-202:1996
(replaced by ISO 10303-242:2014)
ISO 10303-203:2011
(replaced by ISO 10303-242:2014)
ISO 10303-204:2002
(replaced by ISO 10303-242:2014)
ISO 10303-214:2010
(replaced by ISO 10303-242:2014)
TC 190 Soil quality
ISO 13877:1998 (replaced by )
TC 203 Technical energy systems
ISO 13600:1997 (replaced by )
ISO 13601:1998 (replaced by )
ISO 13602-1:2002 (replaced by )
TC 218 Timber
ISO 3133:1975 (replaced by ISO 13061-3:2014)
ISO 3345:1975 (replaced by ISO 13061-6:2014)
ISO 3346:1975 (replaced by ISO 13061-7:2014)
ISO 3349:1975 (replaced by ISO 13061-4:2014)
JTC 1 Information technology
ISO/IEC 24775:2011
(replaced by ISO/IEC 24775-1:2014, ISO/IEC 24775-2:2014, ISO/IEC 24775-3:2014, ISO/IEC 24775-4:2014, ISO/IEC 24775-5:2014, ISO/IEC 24775-6:2014, ISO/IEC 24775-7:2014, ISO/IEC 24775-8:2014)
Meeting calendar
(update at 01 December 2014)
Meetings called for the month of November are not in this edition.
* Information definite but meeting not yet formally convened
** Provisional
January 2015
12-16 Weinheim (Germany)
TC 69/SC 4 Applications of statis-tical methods/Appli-cations of statistical methods in process management
12-16 Dublin (Ireland) TC 121/SC 3 Anaesthetic and res-piratory equipment/Lung ventilators and related equipment
13 Geneva (Switzerland)
CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)
19-20 Toledo (Spain) JTC 1/SC 37 Information technology/Biometrics
19-23 Copenhagen (Denmark)
* JTC 1/SC 35 Information technol-ogy/User interfaces
19-23 Berlin (Germany) PC 248 Sustainability criteria for bioenergy
22-23 Cape Town (South Africa)
TC 44/SC 8 Welding and allied processes/Equip-ment for gas welding, cutting and allied processes
25-29 Foshan (China) TC 107 Metallic and other inorganic coatings
25-29 Foshan (China) TC 107/SC 3 Metallic and other inorganic coatings/Electrodeposited coatings and related finishes
25-29 Foshan (China) TC 107/SC 8 Metallic and other inorganic coatings/Chemical conversion coatings
26-27 Paris (France) TC 166 Ceramic ware, glass-ware and glass ce-ramic ware in contact with food
28 Berlin (Germany) TC 207/SC 3 Environmental man-agement/Environmen-tal labelling
29 West Consho-hocken (Phila-delphia) (USA)
TC 261 Additive manufacturing
February 2015
2 Virtual (Unknown)
TC 22/SC 34 Road vehicles/Propul-sion, powertrain and powertrain fluids
2-3 Paris (France) TC 44/SC 3 Welding and allied processes/Welding consumables
2-5 Beijing (China) TC 257 Evaluation of energy savings
3-13 London (United Kingdom)
TC 213 Dimensional and geometrical product specifications and verification
9-13 Fairfax (USA) TC 58/SC 4 Gas cylinders/Opera-tional requirements for gas cylinders
10-12 London (United Kingdom)
* TC 8/SC 8 Ships and marine technology/Ship design
11 Geneva (Switzerland)
* CSC/SPC Council/Strategy and Policy Committee (CSC/SPC)
11 St. Petersburg, Florida (USA)
TC 115 Pumps
12-13 Geneva (Switzerland)
President's committee
President's committee
22-23 Miami (USA) TMB Technical Manage-ment Board
March 2015
2-6 Troy (USA) * TC 22/SC 37 Road vehicles/Elec-trically propelled vehicles
3 Virtual (Unknown)
CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)
9 Caparica (Portugal)
* TC 48 Laboratory equipment
9-13 Paris (France) TC 108 Mechanical vibration, shock and condition monitoring
9-13 La Plaine St-Denis (France)
TC 108/SC 3 Mechanical vibration, shock and condition monitoring/Use and calibration of vibration and shock measuring instruments
9-13 London (United Kingdom)
TC 110/SC 4 Industrial trucks/Rough-terrain trucks
16 ISO Update, Supplement to ISO Focus -- January 2015
9-13 Morioka (Japan) TC 292 Security (official start-ing date=2015-01-01)
11 Paris (France) TC 108/SC 6 Mechanical vibration, shock and condition monitoring/Vibration and shock generating systems
11-12 Delft (Netherlands)
* TC 67/SC 7 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Offshore structures
12 West Consho-hocken (Phila-delphia) (USA)
TC 221 Geosynthetics
16 Geneva (Switzerland)
President's committee
President's committee
16-18 Geneva (Switzerland)
COUNCIL Council
23-24 Chengdu (China) * TC 17/SC 15 Steel/Railway rails, rails fasteners, wheels and wheelsets
23-27 Vienna (Austria) * JTC 1/SC 38 Information technol-ogy/Cloud Comput-ing and Distributed Platforms
23-27 Paris (France) PC 278 Anti-bribery manage-ment systems
23-27 Tokyo (Japan) TC 5/SC 2 Ferrous metal pipes and metallic fittings/Cast iron pipes, fit-tings and their joints
25-26 Nara (Japan) * TC 184 Automation systems and integration
26 Berlin (Germany) TC 145/SC 2 Graphical symbols/Safety identification, signs, shapes, sym-bols and colours
Rio de Janeiro (Brazil)
** PC 287 Chain of custody of wood and wood-based products
March-April 2015
31-2 Montreal (Canada)
* TC 20/SC 9 Aircraft and space vehicles/Air cargo and ground equipment
1st Quarter 2015
(United Kingdom)
** PC 284 Management system for private security operations - Require-ments with guidance
Foshan (China) ** TC 107/SC 4 Metallic and other inorganic coatings/Hot dip coatings (galvanized, etc.)
Foshan (China) ** TC 107/SC 7 Metallic and other inorganic coatings/Corrosion tests
April 2015
10 London (United Kingdom)
* TC 92/SC 1 Fire safety/Fire initia-tion and growth
13 Paris (France) TC 29/SC 2 Small tools/Hold-ing tools, adaptative items and interfaces
13-14 Lyon (France) TC 117 Fans
13-17 (Czech Republic) ** TC 224 Service activities relating to drinking water supply systems and wastewater systems - Quality criteria of the service and performance indicators
14 Paris (France) TC 29/SC 9 Small tools/Tools with defined cutting edges, cutting items
15-17 St. Peters-burg (Russian Federation)
* TC 172/SC 4 Optics and photonics/Telescopic systems
16 Tienjin (China) TC 161 Control and protec-tive devices for gas and/or oil burners and appliances
17 Paris (France) TC 29 Small tools
19-24 Vico Equense (Italy)
TC 184/SC 4 Automation systems and integration/Indus-trial data
19-24 Hangzhou (China)
* TC 204 Intelligent transport systems
20-22 Zurich (Switzerland)
* TC 126 Tobacco and tobacco products
20-22 Zurich (Switzerland)
* TC 126/SC 1 Tobacco and tobacco products/Physical and dimensional tests
20-22 Zurich (Switzerland)
* TC 126/SC 2 Tobacco and to-bacco products/Leaf tobacco
20-24 San Francisco (USA)
* TC 215 Health informatics
21 Beijing (China) TC 274 Light and lighting
21-22 Düsseldorf (Germany)
TC 44/SC 10 Welding and allied processes/Unification of requirements in the field of metal welding
21-22 (Kazakhstan) ** TC 67/SC 2 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Pipeline transporta-tion systems
22-23 Milan (Italy) TC 8/SC 12 Ships and marine technology/Ships and marine technology - Large yachts
22-24 General Roca (Argentina)
* TC 34/SC 12 Food products/Sen-sory analysis
23 Düsseldorf (Germany)
TC 44/SC 11 Welding and allied processes/Qualifica-tion requirements for welding and allied processes personnel
24 Atlanta (USA) ** TC 6/SC 2 Paper, board and pulps/Test methods and quality specifica-tions for paper and board
24 Luxemburg (Luxembourg)
TC 31 Tyres, rims and valves
25 Atlanta (USA) ** TC 6 Paper, board and pulps
30 London (United Kingdom)
TC 30/SC 2 Measurement of fluid flow in closed conduits/Pressure differential devices
ISO Update, Supplement to ISO Focus -- January 2015 17
30 London (United Kingdom)
TC 30/SC 5 Measurement of fluid flow in closed conduits/Velocity and mass methods
(USA) ** TC 34/SC 15 Food products/Coffee
April-May 2015
15-16 (United Kingdom)
** TC 67/SC 4 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Drilling and produc-tion equipment
27-1 London (United Kingdom)
TC 30 Measurement of fluid flow in closed conduits
May 2015
4-7 Toronto (Canada) * TC 68 Financial services
4-8 Kuching (Malaysia)
** JTC 1/SC 27 Information tech-nology/IT Security techniques
4-8 (Unknown) ** TC 36 Cinematography
8-15 Tokyo (Japan) ** TC 10 Technical product documentation
11-12 Kuching (Malaysia)
* JTC 1/SC 27 Information tech-nology/IT Security techniques
11-12 Ottawa (Canada) * TC 159/SC 4 Ergonomics/Ergo-nomics of human-system interaction
11-13 Turin (Italy) * TC 22/SC 35 Road vehicles/Light-ing and visibility
11-15 Ohio (USA) ** TC 184/SC 5 Automation systems and integration/Inter-operability, integra-tion, and architec-tures for enterprise systems and automa-tion applications
11-16 Bologna (Italy) ** TC 130 Graphic technology
12-15 London (United Kingdom)
** TC 156 Corrosion of metals and alloys
13 Paris (France) ** TC 87 Cork
18-22 (Brazil) ** JTC 1/SC 40 Information tech-nology/IT Service Management and IT Governance
18-22 London (United Kingdom)
** TC 4 Rolling bearings
18-22 London (United Kingdom)
* TC 4/SC 6 Rolling bearings/In-sert bearings
18-22 London (United Kingdom)
* TC 4/SC 9 Rolling bearings/Ta-pered roller bearings
18-22 London (United Kingdom)
* TC 4/SC 11 Rolling bearings/Linear motion rolling bearings
18-22 Chengdu (China) ** TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools
18-22 Luzern (Switzerland)
* TC 114 Horology
19 Naples (Italy) TC 29/SC 5 Small tools/Grinding wheels and abrasives
21-22 Copenhagen (Denmark)
* TC 173 Assistive products for persons with disability
22 Los Angeles (USA)
TC 119 Powder metallurgy
22 Cape Town (South Africa)
* TC 228 Tourism and related services
24-29 Tokyo (Japan) * TC 113 Hydrometry
25-29 Madrid (Spain) ** TC 23/SC 18 Tractors and machin-ery for agriculture and forestry/Irrigation and drainage equipment and systems
26-28 Panama (Panama)
* TC 8/SC 1 Ships and marine technology/Lifesaving and fire protection
26-29 Buenos Aires (Argentina)
* TC 85/SC 5 Nuclear energy, nuclear technolo-gies, and radiological protection/Nuclear fuel cycle
27 London (United Kingdom)
** TC 67/SC 5 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Casing, tubing and drill pipe
Glasgow, Scotland (United Kingdom)
** JTC 1/SC 32 Information technolo-gy/Data management and interchange
(USA) ** PC 272 Forensic sciences
8-15 Tokyo (Japan) ** TC 10/SC 1 Technical product documentation/Basic conventions
8-15 Tokyo (Japan) ** TC 10/SC 6 Technical product documentation/Me-chanical engineering documentation
8-15 Tokyo (Japan) ** TC 10/SC 10 Technical product documentation/Process plant documentation
Tokyo (Japan) ** TC 113/SC 1 Hydrometry/Velocity area methods
Tokyo (Japan) ** TC 113/SC 2 Hydrometry/Flow measurement structures
Tokyo (Japan) ** TC 113/SC 5 Hydrometry/In-struments, equip-ment and data management
Tokyo (Japan) ** TC 113/SC 6 Hydrometry/Sediment transport
Tokyo (Japan) ** TC 113/SC 8 Hydrometry/Ground water
London (United Kingdom)
** TC 131/SC 6 Fluid power systems/Contamination control
Vancouver (Canada)
** TC 282/SC 1 Water re-use/Treated wastewater re-use for Irrigation
Vancouver (Canada)
** TC 282/SC 3 Water re-use/Risk and performance evaluation of water re-use systems
June 2015
1-4 Beijing (China) * TC 249 Traditional chinese medicine
1-5 Arlington (USA) * TC 20/SC 14 Aircraft and space ve-hicles/Space systems and operations
1-5 Sapporo (Japan) ** TC 42 Photography
1-5 Seattle (USA) * TC 43/SC 3 Acoustics/Underwa-ter acoustics
18 ISO Update, Supplement to ISO Focus -- January 2015
1-5 Berlin (Germany) * TC 44/SC 6 Welding and allied processes/Resistance welding and allied mechanical joining
1-6 Philadelphia (USA)
** TC 147 Water quality
3-5 (Japan) ** TC 145 Graphical symbols
5 (France) ** TC 22/SC 36 Road vehicles/Safety aspects and impact testing
5-6 San Antonio (USA)
** TC 85/SC 6 Nuclear energy, nuclear technolo-gies, and radiological protection/Reactor technology
8-12 Houston (USA) * TC 35 Paints and varnishes
8-12 Berlin (Germany) ** TC 121 Anaesthetic and res-piratory equipment
9-10 New York (USA) * TC 29/SC 10 Small tools/Assem-bly tools for screws and nuts, pliers and nippers
9-12 Pretoria (South Africa)
** REMCO Committee on refer-ence materials
9-12 London (United Kingdom)
* TC 289 Brand evaluation
10-11 (France) ** TC 17/SC 9 Steel/Tinplate and blackplate
11-12 Paris (France) TC 24/SC 4 Particle charac-terization includ-ing sieving/Particle characterization
11-12 Southamp-ton (United Kingdom)
** TC 211 Geographic in-formation/Geomatics
15-16 Kyoto (Japan) * TC 22/SC 32 Road vehicles/Elec-trical and electronic components and gen-eral system aspects
15-19 Vancouver (Canada)
** TC 22/SC 13 Road vehicles/Ergo-nomics applicable to road vehicles
15-19 Vancouver (Canada)
* TC 22/SC 39 Road vehicles/Ergonomics
15-19 Munich (Germany)
TC 94/SC 14 Personal safety -- Protective clothing and equipment/Fire-fighters' personal equipment
17-18 Geneva (Switzerland)
* TMB Technical Manage-ment Board
17-19 Berlin (Germany) * TC 172/SC 9 Optics and photon-ics/Electro-optical systems
18-19 Stuttgart (Germany)
* TC 184/SC 2 Automation systems and integration/Robots and robotic devices
21-26 Matsue (Japan) ** TC 37 Terminology and other language and content resources
22-25 Avignon (France) * TC 54 Essential oils
22-26 (Netherlands) ** TC 34/SC 9 Food products/Microbiology
22-26 (China) ** TC 69 Applications of statis-tical methods
22-26 La Plaine St-Denis (France)
* TC 94/SC 6 Personal safety -- Protective clothing and equipment/Eye and face protection
22-26 Göteborg (Sweden)
* TC 188 Small craft
25 Göteborg (Sweden)
* TC 188/SC 2 Small craft/Engines and propulsion systems
30 Virtual (Unknown)
* President's committee
President's committee
Matsue (Japan) ** JTC 1/SC 28 Information technol-ogy/Office equipment
Montreal (Canada)
** JTC 1/SC 31 Information technol-ogy/Automatic iden-tification and data capture techniques
(Australia) ** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training
Zurich (Switzerland)
** TC 17/SC 17 Steel/Steel wire rod and wire products
(Europe) ** TC 34/SC 18 Food products/Cocoa
Beijing (China) ** TC 46 Information and documentation
Mexico City (Mexico)
** TC 242 Energy Management
(Unknown) ** TC 268/SC 1 Sustainable develop-ment in communities/Smart community infrastructures
June-July 2015
30-3 Milan (Italy) * TC 193 Natural gas
30-3 Milan (Italy) * TC 193/SC 1 Natural gas/Analysis of natural gas
30-3 Milan (Italy) * TC 193/SC 3 Natural gas/Upstream area
2nd Quarter 2015
(Europe) ** TC 94/SC 13 Personal safety -- Protective clothing and equipment/Pro-tective clothing
Istanbul (Turkey) ** TC 120 Leather
(China) ** TC 172/SC 7 Optics and photon-ics/Ophthalmic optics and instruments
1st Semester 2015
(USA) ** TC 31/SC 9 Tyres, rims and valves/Valves for tube and tubeless tyres
July 2015
1-7 Berlin (Germany) * TC 91 Surface active agents
6-10 Helsinki (Finland) * TC 44 Welding and allied processes
(USA) ** TC 86/SC 6 Refrigeration and air-conditioning/Testing and rating of air-conditioners and heat pumps
August 2015
26-28 Jeju (Korea, Republic of)
* TC 206 Fine ceramics
August-September 2015
ISO Update, Supplement to ISO Focus -- January 2015 19
31-4 Hokaido (Japan) * JTC 1/SC 35 Information technol-ogy/User interfaces
September 2015
1-6 (Canada) ** TC 163 Thermal performance and energy use in the built environment
4-12 New Delhi (India) ** TC 207 Environmental management
7 Tedding-ton (United Kingdom)
* TC 164/SC 2 Mechanical testing of metals/Ductility testing
7-11 Paris (France) * TC 153 Valves
7-14 Sydney (Australia)
** TC 96 Cranes
8-10 Tedding-ton (United Kingdom)
* TC 164/SC 5 Mechanical testing of metals/Fatigue testing
9 Tedding-ton (United Kingdom)
* TC 164/SC 1 Mechanical testing of metals/Uniaxial testing
9 Tedding-ton (United Kingdom)
* TC 164/SC 4 Mechanical testing of metals/Toughness testing -- Fracture (F), Pendulum (P), Tear (T)
10 Tedding-ton (United Kingdom)
* TC 164/SC 3 Mechanical testing of metals/Hardness testing
11 Tedding-ton (United Kingdom)
* TC 164 Mechanical testing of metals
13 Seoul (Korea, Republic of)
* President's committee
President's committee
13-17 Lahaina, Hawaii (USA)
** TC 127 Earth-moving machinery
14 Seoul (Korea, Republic of)
* COUNCIL Council
14-15 Hawaii (USA) * JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces
14-18 Milan (Italy) * TC 43 Acoustics
14-18 Berlin (Germany) ** TC 150 Implants for surgery
14-18 (Canada) ** TC 205 Building environment design
14-18 Berlin (Germany) * TC 256 Pigments, dyestuffs and extenders
14-25 Berlin (Germany) * TC 213 Dimensional and geometrical product specifications and verification
15 Seoul (Korea, Republic of)
* DEVCO Committee on devel-oping country matters
15 Vienna (Austria) * TC 33 Refractories
15-16 Seoul (Korea, Republic of)
* TMB Technical Manage-ment Board
16-18 Seoul (Korea, Republic of)
* GA General Assembly
17 Seoul (Korea, Republic of)
* CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)
21-24 Delft (Netherlands)
** TC 146/SC 1 Air quality/Stationary source emissions
21-25 Poznan (Poland) ** TC 23/SC 6 Tractors and machin-ery for agriculture and forestry/Equipment for crop protection
21-25 Delft (Netherlands)
** TC 146/SC 6 Air quality/Indoor air
28-29 Basel (Switzerland)
** TC 44/SC 8 Welding and allied processes/Equip-ment for gas welding, cutting and allied processes
(Europe) ** TC 22/SC 19 Road vehicles/Wheels
14-18 Milan (Italy) * TC 43/SC 1 Acoustics/Noise
14-18 Milan (Italy) * TC 43/SC 2 Acoustics/Building acoustics
(Europe) ** TC 67 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries
(Japan) ** TC 133 Clothing sizing sys-tems - size designa-tion, size measure-ment methods and digital fittings
Johor Bahru (Malaysia)
** TC 165 Timber structures
Seattle (USA) ** TC 201/SC 6 Surface chemi-cal analysis/Sec-ondary ion mass spectrometry
(Netherlands) ** TC 258 Project, programme and portfolio management
(China) ** TC 290 Online reputation
September-October 2015
28-2 Edmonton (Canada)
* TC 229 Nanotechnologies
October 2015
1 Rome (Italy) * TC 39/SC 4 Machine tools/Wood-working machines
5 (USA) ** TC 23/SC 13 Tractors and machin-ery for agriculture and forestry/Powered lawn and garden equipment
5-9 Dublin (Ireland) * JTC 1/SC 38 Information technol-ogy/Cloud Comput-ing and Distributed Platforms
5-9 Madrid (Spain) * TC 59/SC 15 Buildings and civil engineering works/Performance descrip-tion of houses
5-9 Vienna (Austria) * TC 190 Soil quality
5-9 Vienna (Austria) * TC 190/SC 2 Soil quality/Sampling
5-9 Vienna (Austria) * TC 190/SC 3 Soil quality/Chemi-cal methods and soil characteristics
5-9 Vienna (Austria) * TC 190/SC 4 Soil quality/Biological methods
5-9 Vienna (Austria) * TC 190/SC 7 Soil quality/Soil and site assessment
8 Virtual (Unknown)
* President's committee
President's committee
8-9 Sao Paulo (Brazil)
* TC 58/SC 2 Gas cylinders/Cylin-der fittings
9 Copenhagen (Denmark)
* TC 254 Safety of amusement rides and amusement devices
20 ISO Update, Supplement to ISO Focus -- January 2015
12-16 Paris (France) * TC 34/SC 17 Food products/Man-agement systems for food safety
12-16 Turin (Italy) ** TC 70 Internal combustion engines
12-16 Beijing (China) * TC 181 Safety of toys
12-17 Beijing (China) * TC 20 Aircraft and space vehicles
12-17 Beijing (China) * TC 20/SC 4 Aircraft and space vehicles/Aerospace fastener systems
12-17 Beijing (China) * TC 20/SC 8 Aircraft and space vehicles/Aerospace terminology
15-17 Seattle (USA) * TC 201 Surface chemical analysis
18-23 Vichy (France) * TC 45 Rubber and rubber products
18-23 Vichy (France) * TC 45/SC 4 Rubber and rubber products/Products (other than hoses)
18-23 Baltimore (USA) * TC 184/SC 4 Automation systems and integration/Indus-trial data
19-21 Jeju (Korea, Republic of)
* TC 281 Fine Bubble Technology
19-23 (Germany) ** TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools
19-23 Gaithersburg (USA)
* TC 92 Fire safety
19-23 Gaithersburg (USA)
* TC 92/SC 1 Fire safety/Fire initia-tion and growth
19-23 Brussels (Belgium)
TC 154 Processes, data elements and documents in com-merce, industry and administration
20-23 Oslo (Norway) ** TC 58/SC 3 Gas cylinders/Cylin-der design
20-23 Beijing (China) * TC 269 Railway applications
21-24 Santiago (Chile) * TC 195 Building construc-tion machinery and equipment
22-23 London (United Kingdom)
* TC 79/SC 2 Light metals and their alloys/Or-ganic and anodic oxidation coatings on aluminium
22-23 Berlin (Germany) * TC 209 Cleanrooms and as-sociated controlled environments
26-29 Pretoria (South Africa)
** TC 264 Fireworks
26-30 New Delhi (India) * JTC 1/SC 27 Information tech-nology/IT Security techniques
26-30 Porto Alegre (Brazil)
* TC 23/SC 17 Tractors and machin-ery for agriculture and forestry/Manu-ally portable forest machinery
28-30 Tsukuba (Japan) ** TC 202 Microbeam analysis
29-30 Tampa, Florida (USA)
* TC 17/SC 12 Steel/Continuous mill flat rolled products
(Unknown) ** TC 2 Fasteners
Madrid (Spain) ** TC 10/SC 8 Technical prod-uct documenta-tion/Construction documentation
(Netherlands) ** TC 34/SC 2 Food products/Ole-aginous seeds and fruits and oilseed meals
(Netherlands) ** TC 34/SC 11 Food products/Animal and vegetable fats and oils
Nairobi (Kenya) ** TC 38 Textiles
Nairobi (Kenya) ** TC 38/SC 1 Textiles/Tests for coloured textiles and colorants
Nairobi (Kenya) ** TC 38/SC 2 Textiles/Cleansing, finishing and water resistance tests
Nairobi (Kenya) ** TC 38/SC 23 Textiles/Fibres and yarns
Nairobi (Kenya) ** TC 38/SC 24 Textiles/Condition-ing atmospheres and physical tests for textile fabrics
Madrid (Spain) ** TC 59/SC 3 Buildings and civil engineering works/Functional/user requirements and performance in build-ing construction
Madrid (Spain) ** TC 59/SC 16 Buildings and civil engineering works/Accessibility and usability of the built environment
Washington, D.C (USA)
** TC 79 Light metals and their alloys
Rio de Janeiro (Brazil)
** TC 130 Graphic technology
Sao Paulo (Brazil)
** TC 135/SC 9 Non-destructive test-ing/Acoustic emission testing
(Turkey) ** TC 180 Solar energy
(Germany) ** TC 244 Industrial furnaces and associated pro-cessing equipment
(China) ** TC 282/SC 3 Water re-use/Risk and performance evaluation of water re-use systems
November 2015
2-6 (Switzerland) ** TC 215 Health informatics
2-6 Beijing (China) * TC 282 Water re-use
3 Berlin (Germany) * TC 83 Sports and other recreational facilities and equipment
9-12 (Spain) ** TC 189 Ceramic tile
9-13 Kobe (Japan) * TC 21 Equipment for fire protection and fire fighting
11 Notting-ham (United Kingdom)
* TC 60 Gears
11-13 (Malaysia) ** TC 123 Plain bearings
12-13 Kuala Lumpur (Malaysia)
** TC 227 Springs
16 (USA) ** PC 252 Natural gas fuelling stations for vehicles
ISO Update, Supplement to ISO Focus -- January 2015 21
20-28 Hong Kong (Hong Kong, China)
* TC 176 Quality management and quality assurance
(China) ** JTC 1 Information technology
Pretoria (South Africa)
** TC 212 Clinical laboratory testing and in vitro di-agnostic test systems
December 2015
10 Berlin (Germany) * TC 44/SC 6 Welding and allied processes/Resistance welding and allied mechanical joining
(United Arab Emirates)
** TC 217 Cosmetics
4th Quarter 2015
(Sweden) ** TC 17/SC 1 Steel/Methods of de-termination of chemi-cal composition
Madrid (Spain) ** TC 98 Bases for design of structures
Dayton, Ohio (USA)
** TC 159/SC 3 Ergonomics/An-thropometry and biomechanics
Tel Aviv (Israel) ** TC 282 Water re-use
2nd Semester 2015
Jeju (Korea, Republic of)
** TC 71 Concrete, reinforced concrete and pre-stressed concrete
(USA) ** TC 171 Document manage-ment applications
(France) ** TC 172/SC 1 Optics and photon-ics/Fundamental standards
Month unknown 2015
Brussels (Belgium)
** TC 23 Tractors and machin-ery for agriculture and forestry
(USA) ** TC 27 Solid mineral fuels
(USA) ** TC 41 Pulleys and belts (including veebelts)
Berlin (Germany) ** TC 138 Plastics pipes, fittings and valves for the transport of fluids
(Japan) ** TC 142 Cleaning equipment for air and other gases
(China) ** TC 155 Nickel and nickel alloys
(USA) ** TC 197 Hydrogen technologies
January 2016
(China) ** TC 120 Leather
February 2016
(USA) ** TC 213 Dimensional and geometrical product specifications and verification
March 2016
14-18 Sydney (Australia)
** TC 108/SC 2 Mechanical vibration, shock and condition monitoring/Measure-ment and evalua-tion of mechanical vibration and shock as applied to ma-chines, vehicles and structures
14-18 Sydney (Australia)
** TC 108/SC 5 Mechanical vibration, shock and condition monitoring/Condition monitoring and diag-nostics of machine systems
17-18 Geneva (Switzerland)
* COUNCIL Council
April 2016
11-15 Sydney (Australia)
** TC 178 Lifts, escalators and moving walks
Seoul (Korea, Republic of)
** TC 161 Control and protec-tive devices for gas and/or oil burners and appliances
May 2016
(Brazil) ** TC 67/SC 4 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Drilling and produc-tion equipment
(India) ** TC 85 Nuclear energy, nuclear technolo-gies, and radiological protection
(Korea, Repub-lic of)
** TC 122 Packaging
Stockholm (Sweden)
** TC 130 Graphic technology
(USA) ** TC 282/SC 3 Water re-use/Risk and performance evaluation of water re-use systems
June 2016
(Germany) ** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training
(Europe) ** TC 22/SC 38 Road vehicles/Motor-cycles and mopeds
2nd Quarter 2016
(Germany) ** TC 34/SC 4 Food products/Cere-als and pulses
1st Semester 2016
New Delhi (India) ** TC 34/SC 7 Food products/Spic-es, culinary herbs and condiments
(China) ** TC 34/SC 16 Food products/Hori-zontal methods for molecular biomarker analysis
September 2016
19 Beijing (China) * COUNCIL Council
21-23 Beijing (China) * GA General Assembly
22 ISO Update, Supplement to ISO Focus -- January 2015
Vienna (Austria) ** JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces
Paris (France) ** TC 17 Steel
Sao Paulo (Brazil)
** TC 209 Cleanrooms and as-sociated controlled environments
Shanghai (China) ** TC 213 Dimensional and geometrical product specifications and verification
Beijing (China) ** TC 256 Pigments, dyestuffs and extenders
3rd Quarter 2016
(USA) ** TC 289 Brand evaluation
October 2016
20-21 London (United Kingdom)
* TC 58 Gas cylinders
(Brazil) ** TC 59 Buildings and civil engineering works
(Korea, Repub-lic of)
** TC 201 Surface chemical analysis
(Israel) ** TC 282/SC 3 Water re-use/Risk and performance evaluation of water re-use systems
November 2016
(Norway) ** JTC 1 Information technology
4th Quarter 2016
Delft (Netherlands)
** TC 28 Petroleum products and related products of synthetic or bio-logical origin
Delft (Netherlands)
** TC 28/SC 5 Petroleum products and related products of synthetic or bio-logical origin/Meas-urement of refriger-ated hydrocarbon and non-petroleum based liquefied gaseous fuels
Delft (Netherlands)
** TC 28/SC 7 Petroleum products and related products of synthetic or bio-logical origin/Liquid Biofuels
Month unknown 2016
(Korea, Repub-lic of)
** JTC 1/SC 23 Information technolo-gy/Digitally Recorded Media for Informa-tion Interchange and Storage
(Russian Federation)
** REMCO Committee on refer-ence materials
(Denmark) ** TC 37 Terminology and other language and content resources
(South Africa) ** TC 44 Welding and allied processes
(Malaysia) ** TC 45 Rubber and rubber products
Wellington (New Zealand)
** TC 46 Information and documentation
Wellington (New Zealand)
** TC 46/SC 11 Information and doc-umentation/Archives/records management
(Sweden) ** TC 102 Iron ore and direct reduced iron
(Japan) ** TC 138/SC 2 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for water supplies
(Japan) ** TC 183 Copper, lead, zinc and nickel ores and concentrates
June 2017
(Australia) ** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training
September 2017
London (United Kingdom)
** JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces
New Delhi (India) ** TC 178 Lifts, escalators and moving walks
3rd Quarter 2017
Vienna (Austria) ** TC 289 Brand evaluation
June 2018
(Korea, Repub-lic of)
** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training