iso update · iso update, supplement to iso ... — magnetic particle testing 2015-06-20 ... hose...
TRANSCRIPT
ISO Update Supplement to ISOfocus
April 2015
ISO Update, Supplement to ISO Focus -- April 2015 1
International Standards in process
An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an Interna-tional Standard takes the form of a committee draft (CD) - this is cir-culated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.
CD registered
Period from 01 March to 31 March 2015
These documents are currently under consideration in the technical committee.
They have been registred at the Central Secretariat.
TC 4 Rolling bearings
ISO/CD 20056-1
Rolling bearings — Load ratings for hybrid bearings with rolling elements made of ceramic — Part 1: Dynamic load ratings
TC 12 Quantities and units
ISO/CD 80003-2
Physiological quantities and their units — Part 2: Physics
ISO/CD 80003-3
Physiological quantities and their units — Part 3: Chemistry
TC 23 Tractors and machinery for agriculture and forestry
ISO/CD 20112 Tractors and machinery for agriculture and forestry - Camera interface between tractor and implement
TC 29 Small tools
ISO/CD 1085 Assembly tools for screws and nuts — Double-ended wrenches — Size pairing
ISO/CD 3318 Assembly tools for screws and nuts — Double-headed open-ended wrenches, double-headed box wrenches and combination wrenches — Maximum widths of heads
ISO/CD 4229 Assembly tools for screws and nuts — Single-head engineer's wrenches for lower torque applications — Maximum outside dimensions of heads and test torques
TC 43 Acoustics
ISO/CD 17208-2
Underwater acoustics — Quantities and procedures for description and measurement of underwater noise from ships — Part 2: De-termination of source levels
TC 44 Welding and allied processes
ISO/CD 3580 Welding consumables — Covered electrodes for manual metal arc welding of creep-resisting steels — Classification
ISO/CD 17633 Welding consumables — Tubular cored elec-trodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels — Classification
ISO/CD 20378 Welding consumables — Rods for gas weld-ing of non alloy and creep resisting steels — Classification
TC 45 Rubber and rubber products
ISO/CD 19984-1
Rubber and rubber products — Determination of biobased content — Part 1: General princi-ples and calculation methods using formulation
ISO/CD 19984-2
Rubber and rubber products — Determina-tion of biobased content — Part 2: Biobased carbon content
ISO/CD 19984-3
Rubber and rubber products — Determination of biobased content — Part 3: Biobased mass content
ISO/CD 20163 Vulcanized rubber — Determination of free sulfur by gaz-phase chromatography (GC) and high performance liquid chromatography (HPLC)
TC 46 Information and documentation
ISO/DTS 18344
Effectiveness of paper deacidification processes
TC 54 Essential oils
ISO/CD 19817 Essential oil of thyme [Thymus vulgaris L.]
TC 61 Plastics
ISO/CD 9994 Lighters — Safety specification
ISO/CD 22702 Utility lighters — General consumer-safety requirements
TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO/CD 4037-1 X and gamma reference radiation for calibrat-ing dosemeters and doserate meters and for determining their response as a function of photon energy — Part 1: Radiation characteris-tics and production methods
ISO/CD 4037-2 X and gamma reference radiation for calibrat-ing dosemeters and doserate meters and for determining their response as a function of photon energy — Part 2: Dosimetry for radia-tion protection over the energy ranges from 8 keV to 1,3 MeV and 4 MeV to 9 MeV
ISO/CD 4037-3 X and gamma reference radiation for calibrat-ing dosemeters and doserate meters and for determining their response as a function of photon energy — Part 3: Calibration of area and personal dosemeters and the measure-ment of their response as a function of energy and angle of incidence
ISO/CD 4037-4 X and gamma reference radiation for calibrat-ing dosemeters and doserate meters and for determining their response as a function of photon energy — Part 4: Calibration of area and personal dosemeters in low energy X refer-ence radiation fields
ISO/CD 19581 Measurement of radioactivity — Gamma emit-ting radionuclides — Rapid test method using NaI(Tl) gamma-ray spectrometry
TC 89 Wood-based panels
ISO/CD 27769 Wood-based panels — Wet-process fibreboard
TC 108 Mechanical vibration, shock and condi-tion monitoring
2 ISO Update, Supplement to ISO Focus -- April 2015
ISO/CD 16063-17
Methods for the calibration of vibration and shock transducers — Part 17: Primary calibra-tion by centrifuge
TC 121 Anaesthetic and respiratory equipment
ISO/CD 80601-2-55
Medical electrical equipment — Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors
TC 123 Plain bearings
ISO/CD 20054 Plain bearings — Bearings containing dis-persed solid lubricants
TC 130 Graphic technology
ISO/CD 13655 Graphic technology — Spectral measurement and colorimetric computation for graphic arts images
TC 131 Fluid power systems
ISO/DTS 13725
Hydraulic fluid power — Method for evaluating cylinder bucklingload
TC 147 Water quality
ISO/CD 5667-12
Water quality — Sampling — Part 12: Guidance on sampling of bottom sediments
TC 150 Implants for surgery
ISO/DTR 19024
Evaluation of CPB devices relative to their capabilities of reducing the transmission of Gaseous MicroEmboli(GME)to a patient during cardiopulmonary bypass
TC 181 Safety of toys
ISO 8124-1:2014/CD Amd 3
Safety of toys — Part 1: Safety aspects related to mechanical and physical properties — Amendment 3: Warnings and fibrous filling material
TC 184 Automation systems and integration
ISO/CD 15746-2
Automation systems and integration — Integra-tion of advanced process control and optimi-zation capabilities for manufacturing systems — Part 2: Activity models and information exchange
TC 193 Natural gas
ISO/DTR 29922
Natural Gas — Supporting information on the calculation of physical properties according to ISO 6976
TC 197 Hydrogen technologies
ISO/CD 19880-2
Gaseous hydrogen — Fueling stations — Part 2: Dispensers
ISO/CD 19880-3
Gaseous hydrogen — Fueling stations — Part 3: Valves
TC 204 Intelligent transport systems
ISO/CD 17185-2
Intelligent transport systems — Public trans-port user information — Part 2: Data and inter-face standards catalogue and cross reference
TC 206 Fine ceramics
ISO/CD 19606 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for surface roughness of fine ceramic films by atomic force microscopy
TC 207 Environmental management
ISO/CD 14052 Environmental management - Material flow cost accounting - Guidance for practical imple-mentation in a supply chain
TC 217 Cosmetics
ISO/DTR 19838
Microbiology — Cosmetics – Guidelines for the application of ISO standards on Cosmetic Microbiology
TC 260 Human resource management
ISO/DTR 30406
Management by sustainable employability of staff
TC 265 Carbon dioxide capture, transportation, and geological storage
ISO/DTR 27912
Carbon dioxide capture — Carbon dioxide capture systems, technologies and processes
JTC 1 Information technology
ISO/IEC CD 20246
Software and Systems Engineering — Work Product Reviews
ISO/IEC PDTR 19566-1
Information technologies — JPEG Systems — Part 1: File format and file structure
ISO/IEC CD 24751-1
Information technology — Individualized adapt-ability and accessibility in e-learning, education and training — Part 1: Framework and refer-ence model
ISO/IEC CD 19794-15
Information technology — Biometric data interchange format — Part 15: Palm crease image data
ISO/IEC CD 29794-4
Information technology — Biometric sample quality — Part 4: Finger image data
ISO/IEC CD 30107-2
Information Technology — Biometric presenta-tion attack detection — Part 2: Data formats
ISO/IEC CD 30134-4
Information Technology — Data Centres — Key performance indicators — Part 4: IT Equipment Energy Efficiency for Servers (ITEE)
ISO/IEC PDTR 20000-10
Information technology — Service manage-ment — Part 10: Concepts and terminology
ISO/IEC PDTR 38504
Information technology — Governance of IT — The structure of principles-based standards in the governance of information technology
DIS circulated
Period from 01 March to 31 March 2015
These documents have obtained substantial support within the ap-propriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
Vote terminates
TC 4 Rolling bearings
ISO/DIS 3245.3
* Rolling bearings — Needle roller bearings with drawn cup and without inner ring — Boundary dimensions, geometrical product specifications (GPS) and toler-ance values
2015-05-20
(Revision of ISO 3245:2007)
TC 8 Ships and marine technology
ISO/DIS 484-2 * Shipbuilding — Ship screw propellers — Manufacturing tolerances — Part 2: Propellers of diameter between 0,80 and 2,50 m inclusive
2015-07-01
(Revision of ISO 484-2:1981)
ISO Update, Supplement to ISO Focus -- April 2015 3
ISO/DIS 17905.2
Ships and marine technology - Installation, inspection and maintenance of container secur-ing devices for ships
2015-05-10
TC 10 Technical product documentation
ISO/DIS 15787.2
* Technical product documenta-tion — Heat-treated ferrous parts — Presentation and indications
2015-06-19
(Revision of ISO 15787:2001)
TC 20 Aircraft and space vehicles
ISO/DIS 12208 * Space systems — Space envi-ronment (natural and artificial) — Observed proton fluences over long duration at GEO and guideline for selection of confi-dence level in statistical model of solar proton fluences
2015-06-20
(Revision of ISO/TS 12208:2011)
TC 22 Road vehicles
ISO/DIS 11898-1
* Road vehicles — Controller area network (CAN) — Part 1: Data link layer and physical signalling
2015-06-27
(Revision of ISO 11898-1:2003, ISO 11898-1:2003/Cor 1:2006)
ISO/DIS 15765-2
* Road vehicles — Diagnostic communication over Controller Area Network (DoCAN) — Part 2: Transport protocol and network layer services
2015-06-20
(Revision of ISO 15765-2:2011)
ISO/DIS 15765-4
* Road vehicles — Diagnostic communication over Controller Area Network (DoCAN) — Part 4: Requirements for emissions-related systems
2015-06-20
(Revision of ISO 15765-4:2011, ISO 15765-4:2011/Amd 1:2013)
ISO/DIS 22901-3
* Road vehicles — Open diagnos-tic data exchange (ODX) — Part 3: Fault symptom exchange description (FXD)
2015-06-20
TC 24 Particle characterization including sieving
ISO/DIS 19430 * Determination of particle size distribution — Particle tracking analysis
2015-06-24
TC 38 Textiles
ISO/DIS 18264 * Textile slings — Lifting slings for general purpose lifting opera-tions made from fibre ropes — High Modulus PolyEthylene (HMPE)
2015-06-20
TC 43 Acoustics
ISO/DIS 9296.2
Acoustics — Declared noise emission values of information technology and telecommunica-tions equipment
2015-05-24
(Revision of ISO 9296:1988)
TC 44 Welding and allied processes
ISO/DIS 17672 * Brazing — Filler metals
2015-06-20
(Revision of ISO 17672:2010)
ISO/DIS 3581 * Welding consumables — Cov-ered electrodes for manual metal arc welding of stain-less and heat-resisting steels — Classification
2015-06-20
(Revision of ISO 3581:2003, ISO 3581:2003/Cor 1:2008, ISO 3581:2003/Amd 1:2011)
ISO/DIS 17637 * Non-destructive testing of welds — Visual testing of fusion-weld-ed joints
2015-06-20
(Revision of ISO 17637:2003)
ISO/DIS 17638 * Non-destructive testing of welds — Magnetic particle testing
2015-06-20
(Revision of ISO 17638:2003)
ISO/DIS 10656 * Resistance welding equipment — Transformers — Integrated transformers for welding guns
2015-06-24
(Revision of ISO 10656:1996, ISO 10656:1996/Cor 1:2000)
TC 45 Rubber and rubber products
ISO/DIS 6802 * Rubber and plastics hoses and hose assemblies with wire rein-forcements — Hydraulic impulse test with flexing
2015-06-20
(Revision of ISO 6802:2005)
ISO/DIS 7233 * Rubber and plastics hoses and hose assemblies — Determina-tion of resistance to vacuum
2015-06-20
(Revision of ISO 7233:2006)
ISO/DIS 7326 * Rubber and plastics hoses — Assessment of ozone resistance under static conditions
2015-06-27
(Revision of ISO 7326:2006)
ISO/DIS 8331 * Rubber and plastics hoses and hose assemblies — Guidelines for selection, storage, use and maintenance
2015-06-20
(Revision of ISO 8331:2014)
ISO/DIS 1304 * Rubber compounding ingredi-ents — Carbon black — Deter-mination of iodine adsorption number
2015-06-24
(Revision of ISO 1304:2006)
ISO/DIS 2286-2
* Rubber- or plastics-coated fab-rics — Determination of roll char-acteristics — Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
2015-06-20
(Revision of ISO 2286-2:1998)
ISO/DIS 2286-3
* Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 3: Method for determination of thickness
2015-06-20
(Revision of ISO 2286-3:1998)
TC 61 Plastics
ISO/DIS 4586-1
* High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 1: Introduction and general information
2015-06-03
(Revision of ISO 4586-1:2004)
4 ISO Update, Supplement to ISO Focus -- April 2015
ISO/DIS 4586-2
* High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 2: Determination of properties
2015-06-03
(Revision of ISO 4586-2:2004)
ISO/DIS 4586-3
* High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 3: Classification and specifi-cations for laminates less than 2 mm thick and intended for bond-ing to supporting substrates
2015-06-03
(Revision of ISO 4586-1:2004)
ISO/DIS 4586-4
* High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 4: Classification and specifi-cations for compact laminates of thickness 2 mm and greater
2015-06-03
(Revision of ISO 4586-1:2004)
ISO/DIS 4586-5
* High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to support-ing substrates
2015-06-03
(Revision of ISO 4586-1:2004)
ISO/DIS 4586-6
* High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 6: Classification and specifications for exterior-grade compact laminates of thickness 2 mm and greater
2015-06-03
(Revision of ISO 4586-1:2004)
ISO/DIS 4586-7
* High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 7: Classification and specifi-cations for design laminates
2015-06-03
(Revision of ISO 4586-1:2004)
ISO/DIS 4586-8
* High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 8: Classification and specifications for alternative core laminates
2015-06-03
(Revision of ISO 4586-1:2004)
TC 67 Materials, equipment and offshore structures for pe-troleum, petrochemical and natural gas industries
ISO/DIS 16530-1
* Petroleum and natural gas indus-tries — Well integrity — Part 1: Life cycle governance
2015-06-20
TC 68 Financial services
ISO/DIS 9564-4.2
* Financial services — Personal Identification Number (PIN) man-agement and security — Part 4: Requirements for PIN handling in eCommerce for Payment Transactions
2015-05-13
(Revision of ISO/TR 9564-4:2004)
TC 107 Metallic and other inorgan-ic coatings
ISO/DIS 18535 * Diamond-like carbon films — Determination of friction and wear characteristics of diamond-like carbon films by ball-on-disc method
2015-06-20
ISO/DIS 19477 * Metallic and other inorganic coatings — Measurement of Young's modulus of thermal bar-rier coatings by beam bending
2015-06-24
TC 110 Industrial trucks
ISO/DIS 10896-2
* Rough-terrain trucks — Safety requirements and verification — Part 2: Slewing trucks
2015-06-27
TC 114 Horology
ISO/DIS 19235 * Analogue quartz clocks — Tim-ing Accuracy
2015-06-24
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO/DIS 16486-4
* Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 4: Valves
2015-06-29
TC 145 Graphical symbols
ISO/DIS 28564-2
* Public information guidance sys-tems — Part 2: Design principles and requirements for location signs and direction signs
2015-06-27
TC 146 Air quality
ISO/DIS 12219-6
* Interior air of road vehicles — Part 6: Method for the deter-mination of the emissions of semi-volatile organic compounds from vehicle interior parts and materials at higher temperature — Small chamber method
2015-06-27
TC 150 Implants for surgery
ISO/DIS 5832-1
* Implants for surgery — Metal-lic materials — Part 1: Wrought stainless steel
2015-06-24
(Revision of ISO 5832-1:2007, ISO 5832-1:2007/Cor 1:2008)
ISO/DIS 5832-3
* Implants for surgery — Metal-lic materials — Part 3: Wrought titanium 6-aluminium 4-vana-dium alloy
2015-07-03
(Revision of ISO 5832-3:1996)
TC 193 Natural gas
ISO/DIS 6976 * Natural gas — Calculation of calorific values, density, relative density and Wobbe indices from composition
2015-06-20
(Revision of ISO 6976:1995, ISO 6976:1995/Cor 1:1997, ISO 6976:1995/Cor 2:1997, ISO 6976:1995/Cor 3:1999)
TC 201 Surface chemical analysis
ISO Update, Supplement to ISO Focus -- April 2015 5
ISO/DIS 18516 * Surface chemical analysis — De-termination of lateral resolution and sharpness in beam based methods
2015-06-03
(Revision of ISO 18516:2006)
TC 211 Geographic information/Geomatics
ISO/DIS 19119 * Geographic information — Services
2015-06-20
(Revision of ISO 19119:2005, ISO 19119:2005/Amd 1:2008)
TC 226 Materials for the produc-tion of primary aluminium
ISO/DIS 19950 * Aluminium oxide primarily used for the production of aluminium — Determination of alpha alumina content — Method using X-ray diffraction net peak areas
2015-06-03
TC 249 Traditional chinese medicine
ISO/DIS 18668-1
* Coding System of Chinese Medi-cines — Part 1: Coding Rules for Chinese Medicines
2015-06-20
JTC 1 Information technology
ISO/IEC DIS 8824-1
* Information technology — Ab-stract Syntax Notation One (ASN.1): Specification of basic notation — Part 1:
2015-06-24
(Revision of ISO/IEC 8824-1:2008, ISO/IEC 8824-1:2008/Cor 1:2012, ISO/IEC 8824-1:2008/Cor 2:2014)
ISO/IEC DIS 8824-2
* Information technology — Ab-stract Syntax Notation One (ASN.1): Information object specification — Part 2:
2015-06-24
(Revision of ISO/IEC 8824-2:2008, ISO/IEC 8824-2:2008/Cor 1:2012)
ISO/IEC DIS 8824-3
* Information technology — Ab-stract Syntax Notation One (ASN.1): Constraint specification — Part 3:
2015-06-24
(Revision of ISO/IEC 8824-3:2008, ISO/IEC 8824-3:2008/Cor 1:2014)
ISO/IEC DIS 8824-4
* Information technology — Ab-stract Syntax Notation One (ASN.1): Parameterization of ASN.1 specifications — Part 4:
2015-06-24
(Revision of ISO/IEC 8824-4:2008, ISO/IEC 8824-4:2008/Cor 1:2014)
ISO/IEC DIS 8825-1
* Information technology — ASN.1 encoding rules: Specification of Basic Encoding Rules (BER), Canonical Encoding Rules (CER) and Distinguished Encoding Rules (DER) — Part 1:
2015-06-24
(Revision of ISO/IEC 8825-1:2008, ISO/IEC 8825-1:2008/Cor 1:2012, ISO/IEC 8825-1:2008/Cor 2:2014)
ISO/IEC DIS 8825-2
* Information technology — ASN.1 encoding rules: Specification of Packed Encoding Rules (PER) — Part 2:
2015-06-24
(Revision of ISO/IEC 8825-2:2008, ISO/IEC 8825-2:2008/Cor 1:2012, ISO/IEC 8825-2:2008/Cor 2:2012)
ISO/IEC DIS 8825-3
* Information technology — ASN.1 encoding rules: Specification of Encoding Control Notation (ECN) — Part 3:
2015-06-24
(Revision of ISO/IEC 8825-3:2008, ISO/IEC 8825-3:2008/Cor 1:2012)
ISO/IEC DIS 8825-4
* Information technology — ASN.1 encoding rules: XML Encoding Rules (XER) — Part 4:
2015-06-24
(Revision of ISO/IEC 8825-4:2008, ISO/IEC 8825-4:2008/Cor 1:2012, ISO/IEC 8825-4:2008/Cor 2:2014)
ISO/IEC DIS 8825-5
* Information technology — ASN.1 encoding rules: Mapping W3C XML schema definitions into ASN.1 — Part 5:
2015-06-24
(Revision of ISO/IEC 8825-5:2008, ISO/IEC 8825-5:2008/Cor 1:2012, ISO/IEC 8825-5:2008/Cor 2:2014)
ISO/IEC/IEEE DIS 24748-4.2
* Systems and software engineer-ing — Life cycle management — Part 4: Systems engineering planning
2015-05-14
(Revision of ISO/IEC 26702:2007)
ISO/IEC DIS 17760-102
* Information technology — AT At-tachment — Part 102: ATA/ATAPI Command set - 2 (ACS-2)
2015-06-24
ISO/IEC DIS 27000
* Information technology — Se-curity techniques — Information security management systems — Overview and vocabulary
2015-06-20
(Revision of ISO/IEC 27000:2014)
ISO/IEC 14496-10:2014/DAmd 1
* Information technology — Cod-ing of audio-visual objects — Part 10: Advanced Video Coding — Amendment 1: Multi-Resolu-tion frame compatible stereo-scopic video with depth maps
2015-06-20
ISO/IEC 23001-8:2013/DAmd 2
* Information technology — MPEG systems technologies — Part 8: Coding-independent code points — Amendment 2: Sample aspect ratio and additional transfer functions, colour primaries and matrix coefficients
2015-06-20
FDIS circulated
Period from 01 March to 31 March 2015
These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown
* Available in English only
6 ISO Update, Supplement to ISO Focus -- April 2015
Vote terminates
TC 20 Aircraft and space vehicles
ISO/FDIS 16682
* Aerospace series — Terminology for clamping devices
2015-05-07
TC 34 Food products
ISO/FDIS 11085
* Cereals, cereals-based products and animal feeding stuffs — Determination of crude fat and total fat content by the Randall extraction method
2015-05-13
(Revision of ISO 11085:2008)
ISO/FDIS 21415-2
* Wheat and wheat flour — Gluten content — Part 2: Determination of wet gluten and gluten index by mechanical means
2015-05-13
(Revision of ISO 21415-2:2006)
ISO/FDIS 16140-1
* Microbiology of the food chain — Method validation — Part 1: Vocabulary
2015-05-20
(Revision of ISO 16140:2003, ISO 16140:2003/Amd 1:2011)
ISO/FDIS 16140-2
* Microbiology of the food chain — Method validation — Part 2: Protocol for the validation of alternative (proprietary) methods against a reference method
2015-05-20
(Revision of ISO 16140:2003, ISO 16140:2003/Amd 1:2011)
ISO/FDIS 17468
* Microbiology of the food chain — Technical requirements and guidance on establishment or revision of standard methods
2015-05-20
TC 39 Machine tools
ISO/FDIS 18217
* Safety of woodworking machines — Edge-banding machines fed by chain(s)
2015-05-27
TC 41 Pulleys and belts (including veebelts)
ISO/FDIS 9563 * Belt drives — Electrical con-ductivity of antistatic endless synchronous belts — Character-istics and test method
2015-05-31
(Revision of ISO 9563:1990)
TC 44 Welding and allied processes
ISO/FDIS 17643
* Non-destructive testing of welds — Eddy current testing of welds by complex-plane analysis
2015-05-20
(Revision of ISO 17643:2005)
TC 45 Rubber and rubber products
ISO/FDIS 1125 * Rubber compounding ingredi-ents — Carbon black — Deter-mination of ash
2015-05-20
(Revision of ISO 1125:1999, ISO 1125:1999/Amd 1:2011)
ISO/FDIS 1658 * Natural rubber (NR) — Evaluation procedure
2015-05-20
(Revision of ISO 1658:2009)
TC 58 Gas cylinders
ISO/FDIS 17871
* Gas cylinders — Quick release cylinder valves — Specification and type testing
2015-05-27
TC 61 Plastics
ISO/FDIS 22007-2
* Plastics — Determination of thermal conductivity and thermal diffusivity — Part 2: Transient plane heat source (hot disc) method
2015-05-20
(Revision of ISO 22007-2:2008)
TC 67 Materials, equipment and offshore structures for pe-troleum, petrochemical and natural gas industries
ISO/FDIS 24817
* Petroleum, petrochemical and natural gas industries — Com-posite repairs for pipework — Qualification and design, installa-tion, testing and inspection
2015-05-06
(Revision of ISO/TS 24817:2006)
TC 70 Internal combustion engines
ISO/FDIS 8178-7
* Reciprocating internal combus-tion engines — Exhaust emission measurement — Part 7: Engine family determination
2015-05-17
(Revision of ISO 8178-7:1996)
ISO/FDIS 8178-8
* Reciprocating internal combus-tion engines — Exhaust emission measurement — Part 8: Engine group determination
2015-05-31
(Revision of ISO 8178-8:1996)
TC 87 Cork
ISO/FDIS 2385 * Packed cork — Virgin cork, raw reproduction cork, ramassage, cleanings, cleanings, burnt cork, boiled reproduction cork and raw corkwaste — Sampling to determine moisture content
2015-05-17
(Revision of ISO 2385:1993)
ISO/FDIS 2386 * Packed cork — Virgin cork, raw reproduction cork, ramassage, cleanings, burnt cork, boiled reproduction cork and raw corkwaste — Determination of moisture content
2015-05-17
(Revision of ISO 2386:1998)
TC 102 Iron ore and direct reduced iron
ISO/FDIS 4689-2
* Iron ores — Determination of sul-fur content — Part 2: Combus-tion/titration method
2015-05-07
(Revision of ISO 4689-2:2004)
ISO/FDIS 4689-3
* Iron ores — Determination of sul-fur content — Part 3: Combus-tion/infrared method
2015-05-07
(Revision of ISO 4689-3:2004)
ISO/FDIS 10203
* Iron ores — Determination of cal-cium — Flame atomic absorp-tion spectrometric method
2015-05-07
(Revision of ISO 10203:2006)
ISO/FDIS 10204
* Iron ores — Determination of magnesium — Flame atomic ab-sorption spectrometric method
2015-05-07
(Revision of ISO 10204:2006)
ISO Update, Supplement to ISO Focus -- April 2015 7
ISO/FDIS 11536
* Iron ores — Determination of loss on ignition — Gravimetric method
2015-05-28
ISO/FDIS 15633
* Iron ores — Determination of nickel — Flame atomic absorp-tion spectrometric method
2015-05-07
(Revision of ISO 15633:2009)
ISO/FDIS 15634
* Iron ores — Determination of chromium content — Flame atomic absorption spectrometric method
2015-05-07
(Revision of ISO 15634:2005)
TC 106 Dentistry
ISO/FDIS 4823 * Dentistry — Elastomeric impres-sion materials
2015-05-20
(Revision of ISO 4823:2000, ISO 4823:2000/Cor 1:2004, ISO 4823:2000/Amd 1:2007)
TC 110 Industrial trucks
ISO/FDIS 11525-5.2
* Rough-terrain trucks — User requirements — Part 5: Interface between rough-terrain truck and integrated personnel work platform
2015-05-07
TC 118 Compressors and pneu-matic tools, machines and equipment
ISO 28927-5:2009/FDAmd 1
* Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 5: Drills and impact drills — Amendment 1
2015-05-06
ISO 28927-8:2009/FDAmd 1
* Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 8: Saws, polishing and filing ma-chines with reciprocating action and small saws with oscillating or rotating action — Amendment 1: Polishing machines, modified feed forces
2015-05-06
TC 121 Anaesthetic and respiratory equipment
ISO/FDIS 23747
* Anaesthetic and respiratory equipment — Peak expiratory flow meters for the assessment of pulmonary function in sponta-neously breathing humans
2015-05-13
(Revision of ISO 23747:2007)
IEC/FDIS 80601-2-71
Medical electrical equipment — Part 2-71: Particular require-ments for the basic safety and essential performance of func-tional Near-Infrared Spectros-copy (NIRS) equipment
2015-05-23
TC 131 Fluid power systems
ISO/FDIS 10771-1
* Hydraulic fluid power — Fa-tigue pressure testing of metal pressure-containing envelopes — Part 1: Test method
2015-05-19
(Revision of ISO 10771-1:2002)
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO/FDIS 15494
* Plastics piping systems for industrial applications — Po-lybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PERT), crosslinked polyethylene (PE-X), polypropylene (PP) — Metric series for specifications for com-ponents and the system
2015-05-13
(Revision of ISO 15494:2003)
TC 150 Implants for surgery
ISO/FDIS 12891-1
* Retrieval and analysis of surgical implants — Part 1: Retrieval and handling
2015-05-28
(Revision of ISO 12891-1:2011)
TC 157 Non-systemic contra-ceptives and STI barrier prophylactics
ISO/FDIS 4074 * Natural rubber latex male con-doms — Requirements and test methods
2015-06-13
(Revision of ISO 4074:2014)
TC 158 Analysis of gases
ISO/FDIS 6142-1
* Gas analysis — Preparation of calibration gas mixtures — Part 1: Gravimetric method for Class I mixtures
2015-05-19
(Revision of ISO 6142:2001, ISO 6142:2001/Amd 1:2009)
TC 163 Thermal performance and energy use in the built environment
ISO/FDIS 9972 * Thermal performance of build-ings — Determination of air permeability of buildings — Fan pressurization method
2015-05-20
(Revision of ISO 9972:2006, ISO 9972:2006/Amd 1:2009)
TC 172 Optics and photonics
ISO/FDIS 10110-5
* Optics and photonics — Prepa-ration of drawings for optical elements and systems — Part 5: Surface form tolerances
2015-05-17
(Revision of ISO 10110-5:2007)
ISO/FDIS 10110-6.2
* Optics and photonics — Prepa-ration of drawings for optical elements and systems — Part 6: Centring tolerances
2015-05-17
(Revision of ISO 10110-6:1996, ISO 10110-6:1996/Cor 1:1999)
ISO/FDIS 10110-19
* Optics and photonics — Prepa-ration of drawings for optical ele-ments and systems — Part 19: General description of surfaces and components
2015-05-17
ISO/FDIS 14999-4
* Optics and photonics — Interfer-ometric measurement of optical elements and optical systems — Part 4: Interpretation and evalu-ation of tolerances specified in ISO 10110
2015-05-17
(Revision of ISO 14999-4:2007)
ISO 8624:2011/FDAmd 1
* Ophthalmic optics — Spectacle frames — Measuring system and terminology — Amendment 1
2015-05-20
TC 188 Small craft
8 ISO Update, Supplement to ISO Focus -- April 2015
ISO/FDIS 19009
* Small craft — Electric navigation lights — Performance of LED lights
2015-05-13
TC 190 Soil quality
ISO/FDIS 16558-1
* Soil quality — Risk-based petroleum hydrocarbons — Part 1: Determination of aliphatic and aromatic fractions of volatile petroleum hydrocarbons using gas chromatography (static headspace method)
2015-05-13
TC 199 Safety of machinery
ISO 13849-1:2006/FDAmd 1
* Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design — Amendment 1
2015-05-20
TC 204 Intelligent transport systems
ISO/FDIS 11067
* Intelligent transport systems — Curve speed warning systems (CSWS) — Performance require-ments and test procedures
2015-05-07
TC 210 Quality management and corresponding general as-pects for medical devices
IEC 62304:2006/FDAmd 1
Medical device software — Software life cycle processes — Amendment 1
2015-05-23
TC 234 Fisheries and aquaculture
ISO/FDIS 16488
* Marine finfish farms — Open net cage — Design and operation
2015-05-19
ISO/FDIS 16541
* Methods for sea lice surveillance on marine finfish farms
2015-05-19
ISO/FDIS 18538
* Traceability of molluscan prod-ucts — Specifications on the information to be recorded in farmed molluscan distribution chains
2015-05-19
TC 254 Safety of amusement rides and amusement devices
ISO/FDIS 17842-1
* Safety of amusement rides and amusement devices — Part 1: Design and manufacture
2015-05-17
TC 257 Evaluation of energy savings
ISO/FDIS 17742.2
* Energy efficiency and savings calculation for countries, regions and cities
2015-05-03
TC 282 Water re-use
ISO/FDIS 16075-1
* Guidelines for treated waste-water use for irrigation projects — Part 1: The basis of a reuse project for irrigation
2015-05-10
(Revision of ISO/CD 16075-2)
ISO/FDIS 16075-2
* Guidelines for treated waste-water use for irrigation projects — Part 2: Development of the project
2015-05-10
ISO/FDIS 16075-3
* Guidelines for treated wastewa-ter use for irrigation projects — Part 3: Components of a reuse project for irrigation
2015-05-10
CASCO Committee on conformity assessment
ISO/IEC FDIS 17021-1
* Conformity assessment — Re-quirements for bodies provid-ing audit and certification of management systems — Part 1: Requirements
2015-05-06
(Revision of ISO/IEC 17021:2011)
JTC 1 Information technology
ISO/IEC FDIS 29157
* Information technology — Tel-ecommunications and informa-tion exchange between systems — PHY/MAC specifications for short-range wireless low-rate ap-plications in the ISM band
2015-05-07
(Revision of ISO/IEC 29157:2010)
ISO/IEC FDIS 19770-5
* Information technology — IT asset management — Overview and vocabulary — Part 5:
2015-05-07
(Revision of ISO/IEC 19770-5:2013)
ISO/IEC 15693-3:2009/FDAmd 2
* Identification cards — Contact-less integrated circuit cards — Vicinity cards — Part 3: Anticol-lision and transmission protocol — Amendment 2: Clarification of use of Data Elements
2015-05-25
ISO/IEC 15693-3:2009/FDAmd 3
* Identification cards — Contact-less integrated circuit cards — Vicinity cards — Part 3: Anticol-lision and transmission protocol — Amendment 3: Extended VICC memory organisation
2015-05-07
ISO/IEC FDIS 14543-4-3
Information technology — Home Electronic Systems (HES) archi-tecture — Part 4-3: Application layer interface to lower com-munications layers for network enhanced control devices of HES Class 1
2015-05-28
ISO/IEC FDIS 27041
* Information technology — Secu-rity techniques — Guidance on assuring suitability and ad-equacy of incident investigative method
2015-05-07
ISO/IEC FDIS 27042
* Information technology — Secu-rity techniques — Guidelines for the analysis and interpretation of digital evidence
2015-05-07
ISO/IEC 13818-1/FDAmd 2
* Information technology — Ge-neric coding of moving pic-tures and associated audio information — Part 1: Systems — Amendment 2: Delivery of timeline for external data
2015-05-17
ISO/IEC 23001-8:2013/FDAmd 1
* Information technology — MPEG systems technologies — Part 8: Coding-independent code points — Amendment 1: New audio code points
2015-05-19
ISO/IEC FDIS 23001-11
* Information technology — MPEG systems technologies — Part 11: Energy-efficient media consump-tion (green metadata)
2015-05-14
ISO Update, Supplement to ISO Focus -- April 2015 9
ISO/IEC 23009-1:2014/FDAmd 2
Information technology — Dy-namic adaptive streaming over HTTP (DASH) — Part 1: Media presentation description and segment formats — Amendment 2: Spatial relationship descrip-tion, generalized URL param-eters and other extensions
2015-05-19
ISO/IEC FDIS 15944-2
* Information technology — Busi-ness Operational View — Part 2: Registration of scenarios and their components as business objects
2015-05-17
(Revision of ISO/IEC 15944-2:2006)
ISO/IEC FDIS 15944-9
* Information technology — Busi-ness Operational View — Part 9: Business transaction traceabil-ity framework for commitment exchange
2015-05-17
ISO/IEC FDIS 19763-5
* Information technology — Meta-model framework for interoper-ability (MFI) — Part 5: Metamodel for process model registration
2015-05-20
ISO/IEC 19794-2:2011/FDAmd 2
Information technology — Bio-metric data interchange formats — Part 2: Finger minutiae data — Amendment 2: XML encoding and clarification of defects
2015-05-19
ISO/IEC 19794-4:2011/FDAmd 2
Information technology — Bio-metric data interchange formats — Part 4: Finger image data — Amendment 2: XML encoding and clarification of defects
2015-05-27
ISO/IEC 19794-7:2014/FDAmd 1
* Information technology — Bio-metric data interchange formats — Part 7: Signature/sign time series data — Amendment 1: XML encoding
2015-05-27
ISO/IEC 19794-9:2011/FDAmd 2
Information technology — Bio-metric data interchange formats — Part 9: Vascular image data — Amendment 2: XML Encoding and clarification of defercts
2015-05-27
Standards published
New International Standards published between 01 March and 31 March 2015
* Available in English only
** French version of standard previously published in English only
Price
group
IIW International Institute of Welding
ISO 14373:2015
Resistance welding — Procedure for spot welding of uncoated and coated low carbon steels
C
TC 8 Ships and marine technology
ISO 28007-1:2015
* Ships and marine technology — Guide-lines for Private Maritime Security Companies (PMSC) providing privately contracted armed security person-nel (PCASP) on board ships (and pro forma contract) — Part 1: General
D
ISO 9876:2015 * Ships and marine technology — Ma-rine facsimile receivers for meteorologi-cal charts
B
ISO 15016:2015
* Ships and marine technology — Guide-lines for the assessment of speed and power performance by analysis of speed trial data
H
ISO 22554:2015
* Ships and marine technology — Pro-peller shaft revolution indicators — Electric type and electronic type
B
ISO 17941:2015
* Ships and marine technology — Hy-draulic hinged watertight fireproof doors
B
TC 17 Steel
ISO 16573:2015
* Steel — Measurement method for the evaluation of hydrogen embrittlement resistance of high strength steels
B
ISO 16124:2015
Steel wire rod — Dimensions and tolerances
B
TC 20 Aircraft and space vehicles
ISO 16694:2015
* Space systems — The measured pa-rameters at firing bench and flight tests of liquid rocket engines
C
TC 22 Road vehicles
ISO 8820-5:2015
* Road vehicles — Fuse-links — Part 5: Fuse-links with axial terminals (Strip fuse-links) Types SF 30 and SF 51 and test fixtures
C
ISO 8820-10:2015
* Road vehicles — Fuse-links — Part 10: Fuse-links with tabs Type L (high cur-rent miniature)
B
ISO 6621-4:2015
* Internal combustion engines — Piston rings — Part 4: General specifications
E
ISO/TR 14645:2015
* Road vehicles — Test procedures for evaluating child restraint system inter-actions with deploying air bags
C
ISO 12617:2015
* Road vehicles — Liquefied natural gas (LNG) refuelling connector — 3,1 MPa connector
C
TC 23 Tractors and machinery for agri-culture and forestry
ISO 16122-1:2015
Agricultural and forestry machinery — Inspection of sprayers in use — Part 1: General
B
ISO 16122-2:2015
Agricultural and forestry machinery — Inspection of sprayers in use — Part 2: Horizontal boom sprayers
C
10 ISO Update, Supplement to ISO Focus -- April 2015
ISO 16122-3:2015
Agricultural and forestry machinery — Inspection of sprayers in use — Part 3: Sprayers for bush and tree crops
C
ISO 16122-4:2015
Agricultural and forestry machines — Inspection of sprayers in use — Part 4: Fixed and semi-mobile sprayers
D
ISO 24253-1:2015
Crop protection equipment — Spray deposition test for field crop — Part 1: Measurement in a horizontal plane
D
ISO 24253-2:2015
Crop protection equipment — Spray deposition test for field crop — Part 2: Measurement in a crop
D
TC 29 Small tools
ISO 1711-1:2015
Assembly tools for screws and nuts — Technical specifications — Part 1: Hand-operated wrenches and sockets
A
ISO 1711-2:2015
Assembly tools for screws and nuts — Technical specifications — Part 2: Machine-operated sockets (impact)
A
ISO 2725-1:2015
* Assembly tools for screws and nuts — Square drive sockets — Part 1: Hand-operated sockets
B
ISO 2725-2:2015
* Assembly tools for screws and nuts — Square drive sockets — Part 2: Machine-operated sockets ("impact")
B
ISO 2725-3:2015
* Assembly tools for screws and nuts — Square drive sockets — Part 3: Ma-chine-operated sockets ("non-impact")
A
TC 34 Food products
ISO 11056:1999/Amd 2:2015
Sensory analysis — Methodology — Magnitude estimation method — Amendment 2
XZ
ISO 29842:2011/Amd 1:2015
* Sensory analysis — Methodology — Balanced incomplete block designs — Amendment 1
XZ
ISO/TS 21569-3:2015
Horizontal methods for molecular bio-marker analysis — Methods of analysis for the detection of genetically modi-fied organisms and derived products — Part 3: Construct-specific real-time PCR method for detection of P35S-pat-sequence for screening genetically modified organisms
B
TC 37 Terminology and other language and content resources
ISO/TS 24620-1:2015
* Language resource management — Controlled natural language (CNL) — Part 1: Basic concepts and principles
B
TC 38 Textiles
ISO/TR 11827:2012
Textiles — Composition testing — Identification of fibres
G
ISO 18103:2015
Superfine woven wool fabric label-ling — Requirements for Super S code definition
B
ISO 1136:2015 * Wool — Determination of mean diameter of fibres — Air permeability method
C
TC 39 Machine tools
ISO 1985:2015 Machine tools — Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocat-ing table — Testing of the accuracy
D
ISO/TR 16907:2015
* Machine tools — Numerical compen-sation of geometric errors
E
TC 42 Photography
ISO 15781:2015
* Photography — Digital still cameras — Measuring shooting time lag, shutter release time lag, shooting rate, and start-up time
D
TC 44 Welding and allied processes
ISO 23277:2015
Non-destructive testing of welds — Penetrant testing — Acceptance levels
A
TC 45 Rubber and rubber products
ISO 6505:2015 * Rubber, vulcanized or thermoplastic — Determination of tendency to adhere to and corrode metals
B
TC 58 Gas cylinders
ISO 21172-1:2015
* Gas cylinders — Welded steel pressure drums up to 3 000 litres capacity for the transport of gases — Design and construction — Part 1: Capacities up to 1 000 litres
F
TC 59 Buildings and civil engineering works
ISO 16757-1:2015
* Data structures for electronic product catalogues for building services — Part 1: Concepts, architecture and model
E
ISO/TS 21929-2:2015
* Sustainability in building construc-tion — Sustainability indicators — Part 2: Framework for the development of indicators for civil engineering works
E
TC 61 Plastics
ISO 899-1:2003/Amd 1:2015
Plastics — Determination of creep behaviour — Part 1: Tensile creep — Amendment 1
XZ
ISO 899-2:2003/Amd 1:2015
Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading — Amendment 1
XZ
ISO 16012:2015
* Plastics — Determination of linear dimensions of test specimens
B
ISO 23560:2015
* Woven polypropylene sacks for bulk packaging of foodstuffs
B
TC 67 Materials, equipment and off-shore structures for petroleum, petrochemical and natural gas industries
ISO/TS 16901:2015
* Guidance on performing risk assess-ment in the design of onshore LNG installations including the ship/shore interface
G
ISO Update, Supplement to ISO Focus -- April 2015 11
ISO 15589-1:2015
* Petroleum, petrochemical and natural gas industries — Cathodic protection of pipeline systems — Part 1: On-land pipelines
G
TC 68 Financial services
ISO 9564-1:2011/Amd 1:2015
* Financial services — Personal Identifi-cation Number (PIN) management and security — Part 1: Basic principles and requirements for PINs in card-based systems — Amendment 1
XZ
TC 72 Textile machinery and accessories
ISO 23771:2015
Textile machinery — Guide to the de-sign of textile machinery for reduction of the noise emissions
E
TC 85 Nuclear energy, nuclear tech-nologies, and radiological protection
ISO/ASTM 51608:2015
* Practice for dosimetry in an X-ray (bremsstrahlung) facility for radiation processing at energies between 50 keV and 7.5 MeV
C
ISO/ASTM 51649:2015
* Practice for dosimetry in an electron beam facility for radiation processing at energies between 300 keV and 25 MeV
E
ISO/ASTM 51707:2015
* Guide for estimation of measurement uncertainty in dosimetry for radiation processing
B
ISO 12799:2015
Nuclear energy — Determination of nitrogen content in UO2, (U,Gd)O2 and (U,Pu)O2 sintered pellets — Inert gas extraction and conductivity detection method
A
TC 92 Fire safety
ISO 5660-1:2015
Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 1: Heat release rate (cone calo-rimeter method) and smoke production rate (dynamic measurement)
G
ISO 16405:2015
* Room corner and open calorimeter — Guidance on sampling and measure-ment of effluent gas production using FTIR technique
C
TC 98 Bases for design of structures
ISO 2394:2015 * General principles on reliability for structures
H
TC 106 Dentistry
ISO 7494-2:2015
Dentistry — Dental units — Part 2: Air, water, suction and wastewater systems
D
TC 108 Mechanical vibration, shock and condition monitoring
ISO 10816-6:1995/Amd 1:2015
* Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 6: Recipro-cating machines with power ratings above 100 kW — Amendment 1
XZ
TC 121 Anaesthetic and respiratory equipment
ISO 5356-1:2015
Anaesthetic and respiratory equipment — Conical connectors — Part 1: Cones and sockets
C
ISO 80601-2-13:2011/Amd 1:2015
* Medical electrical equipment — Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation — Amend-ment 1
XZ
TC 122 Packaging
ISO 17480:2015
* Packaging — Accessible design — Ease of opening
F
TC 131 Fluid power systems
ISO 6953-1:2015
Pneumatic fluid power — Compressed air pressure regulators and filter-regu-lators — Part 1: Main characteristics to be included in literature from suppliers and product-marking requirements
B
ISO 6953-2:2015
Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 2: Test methods to determine the main characteristics to be included in literature from suppliers
E
ISO 18413:2015
Hydraulic fluid power — Cleanliness of components — Inspection document and principles related to contaminant extraction and analysis, and data reporting
F
ISO 3601-5:2015
* Fluid power systems — O-rings — Part 5: Specification of elastomeric materi-als for industrial applications
C
TC 137 Footwear sizing designations and marking systems
ISO/TS 19408:2015
Footwear — Sizing — Vocabulary and terminology
D
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO 4427-1:2007/Amd 1:2015
* Plastics piping systems — Polyethyl-ene (PE) pipes and fittings for water supply — Part 1: General — Amend-ment 1: Melt mass-flow rate (MFR) for PE 80 and PE 100
XZ
ISO 3458:2015 Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under internal pressure
A
ISO 3501:2015 Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for resistance to pull-out under constant longitudinal force
A
ISO 6259-1:2015
Thermoplastics pipes — Determination of tensile properties — Part 1: General test method
B
ISO 13951:2015
Plastics piping systems — Test method for the resistance of plastic pipe/pipe or pipe/fitting assemblies to tensile loading
A
ISO 17778:2015
Plastics piping systems — Fittings, valves and ancillaries — Determination of gaseous flow rate/pressure drop relationships
A
ISO 7509:2015 * Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Determination of time to fail-ure under sustained internal pressure
B
12 ISO Update, Supplement to ISO Focus -- April 2015
ISO 18851:2015
* Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test method to prove the structural design of fittings
B
ISO 4437-4:2015
* Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 4: Valves
C
TC 145 Graphical symbols
ISO 7001:2007/Amd 2:2015
* Graphical symbols — Public informa-tion symbols — Amendment 2
XZ
TC 146 Air quality
ISO 19289:2015
* Air quality — Meteorology — Siting classifications for surface observing stations on land
C
TC 147 Water quality
ISO 17690:2015
* Water quality — Determination of available free cyanide (pH 6) using flow injection analysis (FIA), gas-diffusion and amperometric detection
B
TC 172 Optics and photonics
ISO 9022-12:2015
* Optics and photonics — Environ-mental test methods — Part 12: Contamination
B
ISO 9022-14:2015
* Optics and photonics — Environmental test methods — Part 14: Dew, hoar-frost, ice
A
ISO 9022-17:2015
* Optics and photonics — Environmental test methods — Part 17: Combined contamination, solar radiation
A
ISO 14132-4:2015
* Optics and photonics — Vocabulary for telescopic systems — Part 4: Terms for astronomical telescopes
A
TC 173 Assistive products for persons with disability
IEC 60601-2-52:2009/Amd 1:2015
* Medical electrical equipment — Part 2-52: Particular requirements for the basic safety and essential performance of medical beds — Amendment 1
XZ
ISO/TS 16840-12:2015
* Wheelchair seating — Part 12: Appara-tus and method for cushion envelop-ment testing
C
TC 174 Jewellery
ISO 15093:2015
Jewellery — Determination of precious metals in 999 0/00 gold, platinum and palladium jewellery alloys — Difference method using ICP-OES
B
TC 178 Lifts, escalators and moving walks
ISO 25745-2:2015
Energy performance of lifts, escalators and moving walks — Part 2: Energy calculation and classification for lifts (elevators)
C
ISO 25745-3:2015
Energy performance of lifts, escalators and moving walks — Part 3: Energy calculation and classification of escala-tors and moving walks
C
TC 184 Automation systems and integration
ISO 15746-1:2015
* Automation systems and integration — Integration of advanced process control and optimization capabilities for manufacturing systems — Part 1: Framework and functional model
D
IEC 62264-2:2015
* Enterprise-control system integration — Part 2: Objects and attributes for enterprise-control system integration
H
TC 194 Biological and clinical evaluation of medical devices
ISO/TR 10993-33:2015
* Biological evaluation of medical de-vices — Part 33: Guidance on tests to evaluate genotoxicity — Supplement to ISO 10993-3
F
TC 201 Surface chemical analysis
ISO 14707:2015
* Surface chemical analysis — Glow dis-charge optical emission spectrometry (GD-OES) — Introduction to use
B
TC 204 Intelligent transport systems
ISO/TS 21219-3:2015
* Intelligent transport systems - Traffic and travel information (TTI) via trans-port protocol experts group, generation 2 (TPEG2) — Part 3: UML to binary conversion rules
C
ISO/TS 21219-4:2015
* Intelligent transport systems — Traffic and travel information (TTI) via trans-port protocol experts group, genera-tion 2 (TPEG2) — Part 4: UML to XML conversion rules
F
ISO/TS 21219-5:2015
* Intelligent transport systems - Traffic and travel information (TTI) via trans-port protocol experts group, generation 2 (TPEG2) — Part 5: Service framework (TPEG2-SFW)
F
ISO/TS 21219-6:2015
* Intelligent transport systems - Traffic and travel information via transport protocol experts group, generation 2(TPEG2) — Part 6: Message manage-ment container (TPEG2-MMC)
C
ISO/TS 21219-18:2015
* Intelligent transport systems - Traffic and travel information (TTI) via trans-port protocol experts group, generation 2 (TPEG2) — Part 18: Traffic flow and prediction application (TPEG2-TFP)
F
TC 215 Health informatics
ISO/IEEE 11073-00103:2015
* Health informatics — Personal health device communication — Part 00103: Overview
G
ISO/IEEE 11073-10441:2015
* Health informatics — Personal health device communication — Part 10441: Device specialization — Cardiovascular fitness and activity monitor
H
ISO/IEEE 11073-10442:2015
* Health informatics — Personal health device communication — Part 10442: Device specialization — Strength fit-ness equipment
F
ISO/IEEE 11073-20601:2010/Amd 1:2015
Health informatics — Personal health device communication — Part 20601: Application profile — Optimized ex-change protocol — Amendment 1
H
ISO/IEEE 11073-30200:2004/Amd 1:2015
Health informatics — Point-of-care medical device communication — Part 30200: Transport profile — Cable con-nected — Amendment 1
F
ISO Update, Supplement to ISO Focus -- April 2015 13
ISO/TR 80001-2-7:2015
* Application of risk management for IT-networks incorporating medical devices — Application guidance — Part 2-7: Guidance for Healthcare Delivery Organizations (HDOs) on how to self-assess their conformance with IEC 80001-1
H
TC 221 Geosynthetics
ISO 10318-1:2015
* Geosynthetics — Part 1: Terms and definitions
A
ISO 10318-2:2015
Geosynthetics — Part 2: Symbols and pictograms
B
TC 228 Tourism and related services
ISO 17680:2015
* Tourism and related services — Thalas-sotherapy — Service requirements
D
TC 238 Solid biofuels
ISO 16993:2015
Solid biofuels — Conversion of analyti-cal results from one basis to another
B
ISO 16994:2015
Solid biofuels — Determination of total content of sulfur and chlorine
B
TC 261 Additive manufacturing
ISO 17296-2:2015
Additive manufacturing — General principles — Part 2: Overview of pro-cess categories and feedstock
B
TMBG Technical Management Board - groups
ISO 19600:2014
Compliance management systems — Guidelines
E
IULTCS International Union of Leather Technologists and Chemists Societies
ISO 17234-1:2015
Leather — Chemical tests for the determination of certain azo colorants in dyed leathers — Part 1: Determina-tion of certain aromatic amines derived from azo colorants
C
JTC 1 Information technology
ISO/IEC 14651:2011/Amd 2:2015
Information technology — Interna-tional string ordering and comparison — Method for comparing character strings and description of the common template tailorable ordering — Amend-ment 2
XZ
ISO/IEC 19793:2015
* Information technology — Open Dis-tributed Processing — Use of UML for ODP system specifications
H
ISO/IEC 11695-2:2015
* Identification cards — Optical memory cards — Holographic recording meth-od — Part 2: Dimensions and location of accessible optical area
A
ISO/IEC 16963:2015
* Information technology — Digitally recorded media for information inter-change and storage — Test method for the estimation of lifetime of optical disks for long-term data storage
G
ISO/IEC 14763-3:2014/Cor 1:2015
* Information technology — Imple-mentation and operation of customer premises cabling — Part 3: Testing of optical fibre cabling — Technical Cor-rigendum 1
free
ISO/IEC 27043:2015
* Information technology — Security techniques — Incident investigation principles and processes
E
ISO/IEC 17991:2015
* Information technology — Office equipment — Method for Measuring Scanning Productivity of Digital Multi-functional Devices
E
ISO/IEC 14496-3:2009/Amd 4:2013/Cor 1:2015
* Information technology — Coding of audio-visual objects — Part 3: Audio — Amendment 4: New levels for AAC profiles — Technical Corrigendum 1
free
ISO/IEC 14496-3:2009/Cor 5:2015
* Information technology — Coding of audio-visual objects — Part 3: Audio — Technical Corrigendum 5
free
ISO/IEC 14496-5:2001/Amd 33:2015
* Information technology — Coding of audio-visual objects — Part 5: Refer-ence software — Amendment 33: Ref-erence software for MVC plus depth extension of AVC
XZ
ISO/IEC 14496-5:2001/Amd 27:2011/Cor 1:2015
* Information technology — Coding of audio-visual objects — Part 5: Reference software — Amendment 27: Scalable complexity 3D mesh coding reference software — Technical Cor-rigendum 1
free
ISO/IEC 14496-12:2012/Amd 3:2015
* Information technology — Coding of audio-visual objects — Part 12: ISO base media file format — Amendment 3: Font streams and other improve-ments to file format
XZ
ISO/IEC 14496-12:2012/Cor 3:2015
* Information technology — Coding of audio-visual objects — Part 12: ISO base media file format — Technical Corrigendum 3
free
ISO/IEC 14496-15:2014/Cor 1:2015
* Information technology — Coding of audio-visual objects — Part 15: Carriage of network abstraction layer (NAL) unit structured video in ISO base media file format — Technical Cor-rigendum 1
free
ISO/IEC 14496-16:2011/Cor 1:2015
* Information technology — Coding of audio-visual objects — Part 16: Anima-tion Framework eXtension (AFX) — Technical Corrigendum 1
free
ISO/IEC 14496-26:2010/Cor 8:2015
* Information technology — Coding of audio-visual objects — Part 26: Audio conformance — Technical Corrigen-dum 8
free
ISO/IEC 14496-27:2009/Amd 2:2011/Cor 1:2015
* Information technology — Coding of audio-visual objects — Part 27: 3D Graphics conformance — Amend-ment 2: Scalable complexity 3D mesh coding conformance — Technical Cor-rigendum 1
free
ISO/IEC 14496-29:2015
* Information technology — Coding of audio-visual objects — Part 29: Web video coding
H
ISO/IEC 14496-30:2014/Cor 1:2015
* Information technology — Coding of audio-visual objects — Part 30: Timed text and other visual overlays in ISO base media file format — Technical Corrigendum 1
free
14 ISO Update, Supplement to ISO Focus -- April 2015
ISO/IEC 15444-1:2004/Cor 4:2015
* Information technology — JPEG 2000 image coding system: Core coding system — Part 1: — Technical Cor-rigendum 4
free
ISO/IEC 15444-12:2012/Amd 3:2015
* Information technology — JPEG 2000 image coding system — Part 12: ISO base media file format — Amendment 3: Font streams and other improve-ments to file format
XZ
ISO/IEC 15444-12:2012/Cor 3:2015
* Information technology — JPEG 2000 image coding system — Part 12: ISO base media file format — Technical Corrigendum 3
free
ISO/IEC 21000-8:2008/Amd 3:2015
* Information technology — Multime-dia framework (MPEG-21) — Part 8: Reference software — Amendment 3: Contract Expression Language (CEL) and Media Contract Ontology (MCO) Reference Software
E
ISO/IEC 21000-21:2013/Cor 1:2015
* Information technology — Multimedia framework (MPEG-21) — Part 21: Media Contract Ontology — Technical Corrigendum 1
free
ISO/IEC 23001-7:2015
* Information technology — MPEG systems technologies — Part 7: Com-mon encryption in ISO base media file format files
C
ISO/IEC 23003-2:2010/Amd 3:2015
* Information technology — MPEG audio technologies — Part 2: Spatial Audio Object Coding (SAOC) — Amendment 3: Dialogue enhancement
XZ
ISO/IEC 23003-3:2012/Cor 3:2015
* Information technology — MPEG audio technologies — Part 3: Unified speech and audio coding — Technical Cor-rigendum 3
free
ISO/IEC 23008-1:2014/Cor 1:2015
* Information technology — High ef-ficiency coding and media delivery in heterogeneous environments — Part 1: MPEG media transport (MMT) — Technical Corrigendum 1
free
ISO/IEC 23008-11:2015
* Information technology — High ef-ficiency coding and media delivery in heterogeneous environments — Part 11: MPEG Media Transport Composi-tion Information
E
ISO/IEC 23009-1:2014/Cor 1:2015
* Information technology — Dynamic adaptive streaming over HTTP (DASH) — Part 1: Media presentation descrip-tion and segment formats — Technical Corrigendum 1
free
ISO/IEC 15459-2:2015
* Information technology — Automatic identification and data capture tech-niques — Unique identification — Part 2: Registration procedures
A
ISO/IEC 11179-5:2015
* Information technology — Metadata registries (MDR) — Part 5: Naming principles
D
ISO/IEC 15944-4:2015
* Information technology — Business Operational View — Part 4: Business transaction scenarios — Accounting and economic ontology
G
ISO/IEC 19763-12:2015
* Information technology — Metamodel framework for interoperability (MFI) — Part 12: Metamodel for information model registration
G
ISO/IEC 13250-5:2015
* Information technology — Topic Maps — Part 5: Reference model
B
ISO/IEC 20006-2:2015
* Information technology for learning, education and training — Information model for competency — Part 2: Profi-ciency level information model
E
ISO/IEC TR 29195:2015
* Traveller processes for biometric rec-ognition in automated border
D
ISO/IEC 29197:2015
* Information technology — Evaluation methodology for environmental influ-ence in biometric system performance
D
ISO/IEC 30121:2015
* Information technology — Governance of digital forensic risk framework
A
Standards confirmed
The following International Standards are confimred for a five year period:
TC 5 Ferrous metal pipes and metallic fittings
ISO 2531:2009
ISO 10802:1992 (reconfirmed)
TC 6 Paper, board and pulps
ISO 5350-1:2006 (reconfirmed)
ISO 5350-2:2006 (reconfirmed)
ISO 5350-4:2006 (reconfirmed)
ISO 9197:2006 (reconfirmed)
ISO 11480:1997 (reconfirmed)
ISO 29681:2009
TC 8 Ships and marine technology
ISO 9089:1989 (reconfirmed)
TC 10 Technical product documentation
ISO 5845-1:1995 (reconfirmed)
ISO 5845-2:1995 (reconfirmed)
TC 20 Aircraft and space vehicles
ISO 12175:1994 (reconfirmed)
ISO 13526:2010
ISO 22646:2005
TC 22 Road vehicles
ISO 3784:1976 (reconfirmed)
ISO 13232-5:2005 (reconfirmed)
TC 23 Tractors and machinery for agriculture and forestry
ISO 4002-2:1977 (reconfirmed)
ISO 5678:1993 (reconfirmed)
ISO 8910:1993 (reconfirmed)
ISO 8947:1993 (reconfirmed)
TC 24 Particle characterization including sieving
ISO 9276-1:1998 (reconfirmed)
ISO 9276-5:2005 (reconfirmed)
ISO Update, Supplement to ISO Focus -- April 2015 15
ISO 13318-3:2004 (reconfirmed)
ISO 21501-1:2009
TC 27 Solid mineral fuels
ISO 18894:2006 (reconfirmed)
ISO 18283:2006 (reconfirmed)
TC 28 Petroleum products and related prod-ucts of synthetic or biological origin
ISO 14935:1998 (reconfirmed)
ISO 6743-2:1981 (reconfirmed)
ISO 6743-5:2006 (reconfirmed)
ISO 6743-7:1986 (reconfirmed)
ISO 6743-8:1987 (reconfirmed)
ISO 8068:2006 (reconfirmed)
ISO 8216-3:1987 (reconfirmed)
ISO 8681:1986 (reconfirmed)
ISO 10050:2005 (reconfirmed)
ISO 11158:2009
TC 29 Small tools
ISO 10643:2009
ISO 603-1:1999 (reconfirmed)
ISO 603-2:1999 (reconfirmed)
ISO 603-3:1999 (reconfirmed)
ISO 603-4:1999 (reconfirmed)
ISO 603-5:1999 (reconfirmed)
ISO 603-6:1999 (reconfirmed)
ISO 603-7:1999 (reconfirmed)
ISO 603-8:1999 (reconfirmed)
ISO 603-9:1999 (reconfirmed)
ISO 603-10:1999 (reconfirmed)
ISO 603-12:1999 (reconfirmed)
ISO 603-13:1999 (reconfirmed)
ISO 603-14:1999 (reconfirmed)
ISO 603-15:1999 (reconfirmed)
ISO 603-16:1999 (reconfirmed)
ISO 9136-2:1999 (reconfirmed)
TC 34 Food products
ISO 7513:1990 (reconfirmed)
ISO 14502-1:2005 (reconfirmed)
ISO 14502-2:2005 (reconfirmed)
ISO 9116:2004 (reconfirmed)
TC 38 Textiles
ISO 5080:1994 (reconfirmed)
ISO 5085-1:1989 (reconfirmed)
ISO 9073-13:2006 (reconfirmed)
ISO 9073-14:2006 (reconfirmed)
ISO 10547:2009
ISO 10554:2009
ISO 10556:2009
ISO 10572:2009
ISO 3005:1978 (reconfirmed)
ISO 2062:2009
ISO 6939:1988 (reconfirmed)
TC 39 Machine tools
ISO 369:2009
ISO 3408-3:2006 (reconfirmed)
ISO 23848-1:2009
ISO 23848-2:2009
TC 44 Welding and allied processes
ISO 18592:2009
TC 48 Laboratory equipment
ISO 4142:2002 (reconfirmed)
ISO 10991:2009
TC 54 Essential oils
ISO 279:1998 (reconfirmed)
ISO 280:1998 (reconfirmed)
ISO 592:1998 (reconfirmed)
ISO 3033-1:2005 (reconfirmed)
ISO 3033-2:2005 (reconfirmed)
ISO 3033-3:2005 (reconfirmed)
ISO 3033-4:2005 (reconfirmed)
ISO 3215:1998 (reconfirmed)
ISO 3520:1998 (reconfirmed)
ISO 3526:2005 (reconfirmed)
ISO 4720:2009
ISO 4728:2003 (reconfirmed)
ISO 7359:1985 (reconfirmed)
ISO 7609:1985 (reconfirmed)
ISO 9842:2003 (reconfirmed)
ISO 9844:2006 (reconfirmed)
ISO 10624:1998 (reconfirmed)
ISO 11019:1998 (reconfirmed)
ISO 11024-1:1998 (reconfirmed)
ISO 11024-2:1998 (reconfirmed)
ISO 11043:1998 (reconfirmed)
ISO 14714:1998 (reconfirmed)
ISO 14716:1998 (reconfirmed)
ISO 22769:2009
ISO 23954:2009
TC 58 Gas cylinders
ISO 22434:2006 (reconfirmed)
TC 61 Plastics
ISO 871:2006 (reconfirmed)
TC 69 Applications of statistical methods
ISO 24153:2009
TC 74 Cement and lime
ISO 679:2009
ISO 29582-1:2009
TC 76 Transfusion, infusion and injection, and blood processing equipment for medi-cal and pharmaceutical use
ISO 8362-1:2009
ISO 8362-7:2006 (reconfirmed)
ISO 8871-4:2006 (reconfirmed)
TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO 361:1975 (reconfirmed)
ISO 17874-4:2006 (reconfirmed)
TC 96 Cranes
ISO 2374:1983 (reconfirmed)
ISO 11994:1997 (reconfirmed)
TC 98 Bases for design of structures
ISO 11697:1995 (reconfirmed)
16 ISO Update, Supplement to ISO Focus -- April 2015
TC 102 Iron ore and direct reduced iron
ISO 3086:2006 (reconfirmed)
ISO 2597-1:2006 (reconfirmed)
ISO 6830:1986 (reconfirmed)
TC 105 Steel wire ropes
ISO 2262:1984 (reconfirmed)
TC 106 Dentistry
ISO 1942:2009
ISO 7711-3:2004 (reconfirmed)
ISO 9168:2009
ISO 4073:2009
ISO 7488:1991 (reconfirmed)
ISO 7493:2006 (reconfirmed)
TC 107 Metallic and other inorganic coatings
ISO 1460:1992 (reconfirmed)
ISO 1461:2009
TC 112 Vacuum technology
ISO 27894:2009
ISO 27895:2009
TC 114 Horology
ISO 3159:2009
TC 117 Fans
ISO 13351:2009
TC 118 Compressors and pneumatic tools, machines and equipment
ISO 28927-1:2009
ISO 28927-2:2009
ISO 28927-3:2009
ISO 28927-5:2009
ISO 28927-6:2009
ISO 28927-7:2009
ISO 28927-8:2009
ISO 28927-9:2009
TC 121 Anaesthetic and respiratory equipment
ISO 7376:2009
ISO 11712:2009
ISO 21969:2009
TC 126 Tobacco and tobacco products
ISO 2965:2009
TC 130 Graphic technology
ISO 2834-1:2006 (reconfirmed)
ISO 2846-1:2006 (reconfirmed)
ISO 11084-2:2006 (reconfirmed)
ISO 12642-2:2006 (reconfirmed)
ISO 15930-4:2003 (reconfirmed)
ISO 15930-6:2003 (reconfirmed)
TC 131 Fluid power systems
ISO 4395:2009
ISO 11727:1999 (reconfirmed)
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO 4435:2003 (reconfirmed)
ISO 7675:2003 (reconfirmed)
ISO 1167-1:2006 (reconfirmed)
ISO 12162:2009
ISO 13967:2009
ISO 17454:2006 (reconfirmed)
TC 146 Air quality
ISO 24095:2009
TC 147 Water quality
ISO 17852:2006 (reconfirmed)
ISO 22743:2006 (reconfirmed)
ISO 23913:2006 (reconfirmed)
ISO 10704:2009
ISO 9509:2006 (reconfirmed)
TC 150 Implants for surgery
ISO 5832-2:1999 (reconfirmed)
ISO 20160:2006 (reconfirmed)
ISO 14243-1:2009
ISO 14243-2:2009
TC 155 Nickel and nickel alloys
ISO 7530-7:1992 (reconfirmed)
ISO 7530-8:1992 (reconfirmed)
ISO 7530-9:1993 (reconfirmed)
ISO 9388:1992 (reconfirmed)
ISO 11436:1993 (reconfirmed)
TC 156 Corrosion of metals and alloys
ISO 7539-2:1989 (reconfirmed)
ISO 7539-3:1989 (reconfirmed)
ISO 7539-4:1989 (reconfirmed)
ISO 7539-5:1989 (reconfirmed)
ISO 8407:2009
ISO 12732:2006 (reconfirmed)
ISO 21610:2009
TC 162 Doors and windows
ISO 6612:1980 (reconfirmed)
ISO 6613:1980 (reconfirmed)
ISO 8270:1985 (reconfirmed)
ISO 8275:1985 (reconfirmed)
TC 164 Mechanical testing of metals
ISO 3785:2006 (reconfirmed)
TC 173 Assistive products for persons with disability
ISO 16201:2006 (reconfirmed)
TC 183 Copper, lead, zinc and nickel ores and concentrates
ISO 10251:2006 (reconfirmed)
ISO 10469:2006 (reconfirmed)
ISO 12744:2006 (reconfirmed)
ISO 13291:2006 (reconfirmed)
TC 184 Automation systems and integration
ISO 13584-31:1999
(reconfirmed)
TC 188 Small craft
ISO 12401:2009
TC 212 Clinical laboratory testing and in vitro diagnostic test systems
ISO 15193:2009
ISO 15194:2009
TC 215 Health informatics
ISO 17432:2004 (reconfirmed)
ISO Update, Supplement to ISO Focus -- April 2015 17
ISO/HL7 27932:2009
ISO/HL7 27951:2009
TC 219 Floor coverings
ISO 1766:1999 (reconfirmed)
ISO 2094:1999 (reconfirmed)
ISO 2550:1972 (reconfirmed)
ISO 3018:1974 (reconfirmed)
ISO 11857:1999 (reconfirmed)
ISO 11861:1999 (reconfirmed)
ISO 24011:2009
ISO 24335:2006 (reconfirmed)
ISO 24339:2006 (reconfirmed)
ISO 24340:2006 (reconfirmed)
ISO 24345:2006 (reconfirmed)
IULTCS International Union of Leather Tech-nologists and Chemists Societies
ISO 11644:2009
JTC 1 Information technology
ISO/IEC 13170:2009
ISO/IEC 29171:2009
ISO/IEC 19757-7:2009
ISO/IEC 12785-1:2009
ISO/IEC 19794-3:2006
ISO/IEC TR 19795-3:2007
ISO/IEC 24708:2008
ISO/IEC 24713-3:2009
ISO/IEC TR 24714-1:2008
ISO/IEC TR 24741:2007
ISO/IEC 29109-1:2009
Standards withdrawn
Period from 01 March to 31 March 2015
TC 8 Ships and marine technology
ISO/PAS 28007:2012
(replaced by ISO 28007-1:2015)
TC 106 Dentistry
ISO 11144:1995 (replaced by ISO 7494-2:2015)
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO 10933:1997 (replaced by ISO 4437-4:2015)
TC 221 Geosynthetics
ISO 10318:2005 (replaced by ISO 10318-1:2015, ISO 10318-2:2015)
JTC 1 Information technology
ISO/IEC 15504-2:2003
(replaced by ISO/IEC 33002:2015, ISO/IEC 33003:2015, ISO/IEC 33004:2015, ISO/IEC 33020:2015)
ISO/IEC TR 15504-7:2008
(replaced by ISO/IEC 33001:2015, ISO/IEC 33002:2015, ISO/IEC 33003:2015, ISO/IEC 33004:2015, ISO/IEC TR 33014:2013)
Meeting calendar
(update at 01 March 2015)
Meetings called for the month of February are not in this edition.
* Information definite but meeting not yet formally convened
** Provisional
April 2015
10 London (United Kingdom)
TC 92/SC 1 Fire safety/Fire initia-tion and growth
13 Paris (France) TC 29/SC 2 Small tools/Hold-ing tools, adaptative items and interfaces
13-14 Lyon (France) TC 117 Fans
13-17 Namur (Belgium) TC 34/SC 5 Food products/Milk and milk products
13-17 Vienna (Austria) TC 224 Service activities relating to drinking water supply systems and wastewater systems - Quality criteria of the service and performance indicators
14 Paris (France) TC 29/SC 9 Small tools/Tools with defined cutting edges, cutting items
14-17 London (United Kingdom)
TC 292 Security
15-16 London (United Kingdom)
TC 67/SC 4 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Drilling and produc-tion equipment
15-17 Kuala Lumpur (Malaysia)
PC 286 Collaborative business relation-ship management -- Framework
15-17 St. Peters-burg (Russian Federation)
TC 172/SC 4 Optics and photonics/Telescopic systems
16 Courbevoie, Paris (France)
TC 29/SC 8 Small tools/Tools for pressing and moulding
16 Tienjin (China) TC 161 Control and protec-tive devices for gas and/or oil burners and appliances
18 ISO Update, Supplement to ISO Focus -- April 2015
17 Paris (France) TC 29 Small tools
17 Coimbra (Portugal)
TC 92/SC 3 Fire safety/Fire threat to people and environment
19-24 Vico Equense (Italy)
TC 184/SC 4 Automation systems and integration/Indus-trial data
19-24 Hangzhou (China)
TC 204 Intelligent transport systems
19-25 Atlanta (USA) TC 6/SC 2 Paper, board and pulps/Test methods and quality specifica-tions for paper and board
20-22 Zurich (Switzerland)
TC 126 Tobacco and tobacco products
20-22 Zurich (Switzerland)
TC 126/SC 1 Tobacco and tobacco products/Physical and dimensional tests
20-22 Zurich (Switzerland)
TC 126/SC 2 Tobacco and to-bacco products/Leaf tobacco
20-24 Cherasco (Italy) TC 22/SC 41 Road vehicles/Spe-cific aspects for gase-ous fuels
20-24 St. Augustin (Germany)
TC 94/SC 15 Personal safety -- Protective clothing and equipment/Respiratory protective devices
20-24 San Francisco (USA)
TC 215 Health informatics
21 Beijing (China) TC 274 Light and lighting
21-22 Düsseldorf (Germany)
TC 44/SC 10 Welding and allied processes/Unification of requirements in the field of metal welding
21-22 Astana (Kazakhstan)
TC 67/SC 2 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Pipeline transporta-tion systems
21-24 San José, Cali-fornia (USA)
TC 171 Document manage-ment applications
21-24 San José, Cali-fornia (USA)
TC 171/SC 1 Document manage-ment applications/Quality
22-23 Milan (Italy) TC 8/SC 12 Ships and marine technology/Ships and marine technology - Large yachts
23 Luxemburg (Luxembourg)
TC 31/SC 3 Tyres, rims and valves/Passenger car tyres and rims
23 Luxemburg (Luxembourg)
TC 31/SC 10 Tyres, rims and valves/Cycle, moped, motorcycle tyres and rims
23 Düsseldorf (Germany)
TC 44/SC 11 Welding and allied processes/Qualifica-tion requirements for welding and allied processes personnel
23-24 Buenos Aires (Argentina)
TC 34/SC 12 Food products/Sen-sory analysis
24 Cherasco (Italy) ** TC 22/SC 25 Road vehicles/Vehi-cles using gaseous fuels
24 Luxemburg (Luxembourg)
TC 31 Tyres, rims and valves
24 San José, Cali-fornia (USA)
TC 171/SC 2 Document manage-ment applications/Application issues
24-27 Washington, D.C (USA)
TC 272 Forensic sciences
25 Atlanta (USA) TC 6 Paper, board and pulps
30 Virtual (Unknown)
President's committee
President's committee
30 London (United Kingdom)
TC 30/SC 2 Measurement of fluid flow in closed conduits/Pressure differential devices
30 London (United Kingdom)
TC 30/SC 5 Measurement of fluid flow in closed conduits/Velocity and mass methods
April-May 2015
27-1 London (United Kingdom)
TC 30 Measurement of fluid flow in closed conduits
May 2015
4-7 Toronto (Canada) TC 68 Financial services
4-7 Buxton (United Kingdom)
TC 94/SC 15 Personal safety -- Protective clothing and equipment/Respiratory protective devices
5-6 Rio de Janeiro (Brazil)
TC 67/SC 6 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Processing equip-ment and systems
6 Toronto (Canada) TC 68 Financial services
6 Toronto (Canada) TC 68/SC 2 Financial services/Financial Services, security
6 Toronto (Canada) TC 68/SC 7 Financial services/Core banking
10-15 Rio de Janeiro (Brazil)
JTC 1/SC 7 Information technol-ogy/Software and systems engineering
11-12 Kuching (Malaysia)
JTC 1/SC 27 Information tech-nology/IT Security techniques
11-12 Ottawa (Canada) TC 159/SC 4 Ergonomics/Ergo-nomics of human-system interaction
11-15 Ohio (USA) TC 184/SC 5 Automation systems and integration/Inter-operability, integra-tion, and architec-tures for enterprise systems and automa-tion applications
11-16 Bologna (Italy) TC 130 Graphic technology
12-13 Rio de Janeiro (Brazil)
* TC 67/SC 6 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Processing equip-ment and systems
12-15 Beijing (China) TC 156 Corrosion of metals and alloys
ISO Update, Supplement to ISO Focus -- April 2015 19
12-15 Shanghai (China) TC 172/SC 7 Optics and photon-ics/Ophthalmic optics and instruments
13 Tokyo (Japan) TC 10/SC 6 Technical product documentation/Me-chanical engineering documentation
13 Turin (Italy) TC 22/SC 35 Road vehicles/Light-ing and visibility
13 Paris (France) TC 87 Cork
14 Tokyo (Japan) TC 10/SC 1 Technical product documentation/Basic conventions
15 Tokyo (Japan) TC 10 Technical product documentation
17-22 Copenhagen (Denmark)
TC 173/SC 1 Assistive products for persons with disability/Wheelchairs
18 London (United Kingdom)
TC 4/SC 7 Rolling bearings/Spherical plain bearings
18-21 Prague (Czech Republic)
* TC 229 Nanotechnologies
18-22 Glasgow, Scotland (United Kingdom)
JTC 1/SC 32 Information technolo-gy/Data management and interchange
18-22 Sao Paulo (Brazil)
JTC 1/SC 40 Information tech-nology/IT Service Management and IT Governance
18-22 Chengdu (China) TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools
18-22 Luzern (Switzerland)
TC 114 Horology
20 Okinawa (Japan) TC 131/SC 4 Fluid power systems/Connectors and similar products and components
20 Okinawa (Japan) TC 131/SC 6 Fluid power systems/Contamination control
20 Okinawa (Japan) TC 131/SC 9 Fluid power systems/Installations and systems
19 London (United Kingdom)
TC 4/SC 8 Rolling bearings/Load ratings and life
19 Naples (Italy) TC 29/SC 5 Small tools/Grinding wheels and abrasives
19 Turin (Italy) TC 89/SC 3 Wood-based panels/Plywood
19 Luzern (Switzerland)
TC 114/SC 3 Horology/Water-resistant watches
20 London (United Kingdom)
TC 4/SC 11 Rolling bearings/Linear motion rolling bearings
20 Nagano (Japan) TC 20/SC 13 Aircraft and space vehicles/Space data and information trans-fer systems
20 Turin (Italy) TC 89 Wood-based panels
20 Turin (Italy) TC 89/SC 1 Wood-based panels/Fibre boards
20 Turin (Italy) TC 89/SC 2 Wood-based panels/Particle boards
20 Luzern (Switzerland)
TC 114/SC 14
Horology/Table and wall clocks
20 Okinawa (Japan) TC 131 Fluid power systems
21 London (United Kingdom)
TC 4/SC 4 Rolling bearings/Tolerances, tolerance definitions and sym-bols (including GPS)
21 London (United Kingdom)
TC 4/SC 5 Rolling bearings/Needle, cylindrical and spherical roller bearings
21 London (United Kingdom)
TC 4/SC 12 Rolling bearings/Ball bearings
21 Luzern (Switzerland)
TC 114/SC 12
Horology/Antimagnetism
21-22 Copenhagen (Denmark)
TC 173 Assistive products for persons with disability
21-22 Yangzhou (China)
TC 293 Feed machinery
22 London (United Kingdom)
TC 4 Rolling bearings
22 Los Angeles (USA)
TC 119 Powder metallurgy
22 Cape Town (South Africa)
TC 228 Tourism and related services
24-29 Tokyo (Japan) TC 113 Hydrometry
25 Tokyo (Japan) TC 113/SC 1 Hydrometry/Velocity area methods
25-29 Madrid (Spain) TC 23/SC 18 Tractors and machin-ery for agriculture and forestry/Irrigation and drainage equipment and systems
25-29 Vancouver (Canada)
TC 282/SC 2 Water re-use/Water re-use in urban areas
26 Tokyo (Japan) TC 113/SC 6 Hydrometry/Sediment transport
26-27 Ghent (Belgium) JTC 1/SC 6 Information technol-ogy/Telecommunica-tions and information exchange between systems
26-27 Greenville (USA) TC 31/SC 9 Tyres, rims and valves/Valves for tube and tubeless tyres
26-29 Buenos Aires (Argentina)
TC 85/SC 5 Nuclear energy, nuclear technolo-gies, and radiological protection/Nuclear fuel cycle
27 Geneva (Switzerland)
TAG 14 Image Technology
27 London (United Kingdom)
TC 67/SC 5 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Casing, tubing and drill pipe
27 Tokyo (Japan) TC 113/SC 8 Hydrometry/Ground water
27 Vancouver (Canada)
TC 282/SC 3 Water re-use/Risk and performance evaluation of water re-use systems
27-28 Vancouver (Canada)
TC 282/SC 1 Water re-use/Treated wastewater re-use for Irrigation
27-29 Panama (Panama)
TC 8/SC 1 Ships and marine technology/Lifesaving and fire protection
20 ISO Update, Supplement to ISO Focus -- April 2015
28 Virtual (Unknown)
President's committee
President's committee
28 Tokyo (Japan) TC 113/SC 2 Hydrometry/Flow measurement structures
28 Tokyo (Japan) TC 113/SC 5 Hydrometry/In-struments, equip-ment and data management
London (United Kingdom)
** TC 131/SC 6 Fluid power systems/Contamination control
June 2015
1-4 Beijing (China) TC 46/SC 11 Information and doc-umentation/Archives/records management
1-4 Beijing (China) TC 249 Traditional chinese medicine
1-5 Arlington (USA) TC 20/SC 14 Aircraft and space ve-hicles/Space systems and operations
1-5 Guayaquil (Ecuador)
TC 34/SC 18 Food products/Cocoa
1-5 Sapporo (Japan) TC 42 Photography
1-5 Seattle (USA) TC 43/SC 3 Acoustics/Underwa-ter acoustics
1-5 Beijing (China) TC 46/SC 4 Information and documentation/Tech-nical interoperability
1-6 Philadelphia (USA)
TC 147 Water quality
2-4 Shizuoka City (Japan)
TC 34/SC 8 Food products/Tea
2-9 Matsue (Japan) JTC 1/SC 28 Information technol-ogy/Office equipment
3-4 Nanjing (China) TC 155 Nickel and nickel alloys
3-5 Glasgow, Scotland (United Kingdom)
TC 267 Facilities management
4 Beijing (China) TC 46/SC 8 Information and documentation/Quality - Statistics and performance evaluation
4 Beijing (China) TC 46/SC 9 Information and documentation/Identification and description
4 Beijing (China) TC 46/SC 10 Information and documentation/Requirements for document storage and conditions for preservation
4 Tokyo (Japan) TC 145/SC 1 Graphical symbols/Public information symbols
4-5 Merida (Mexico) TC 242 Energy Management
5 Paris (France) TC 22/SC 36 Road vehicles/Safety aspects and impact testing
5 Beijing (China) TC 46 Information and documentation
5 Tokyo (Japan) TC 145 Graphical symbols
5 Tokyo (Japan) TC 145/SC 3 Graphical symbols/Graphical symbols for use on equipment
5-6 San Antonio (USA)
TC 85/SC 6 Nuclear energy, nuclear technolo-gies, and radiological protection/Reactor technology
8-9 Chicago (USA) TC 34/SC 15 Food products/Coffee
8-10 Arlington (USA) TC 20/SC 16 Aircraft and space vehicles/Unmanned aircraft systems
8-12 Houston (USA) TC 35 Paints and varnishes
8-12 Berlin (Germany) TC 121 Anaesthetic and res-piratory equipment
8-12 Berlin (Germany) * TC 121/SC 1 Anaesthetic and res-piratory equipment/Breathing attach-ments and anaes-thetic machines
8-12 Grasmere (Unit-ed Kingdom)
TC 268 Sustainable develop-ment in communities
9 Hokaido (Japan) TC 31/SC 6 Tyres, rims and valves/Off-the-road tyres and rims
9-10 New York (USA) TC 29/SC 10 Small tools/Assem-bly tools for screws and nuts, pliers and nippers
9-12 Pretoria (South Africa)
REMCO Committee on refer-ence materials
9-12 London (United Kingdom)
TC 289 Brand evaluation
10 Sapporo (Japan) * TC 31/SC 7 Tyres, rims and valves/Industrial tyres and rims
10-11 La Plaine St-Denis (France)
TC 17/SC 9 Steel/Tinplate and blackplate
11 Sapporo (Japan) * TC 31/SC 5 Tyres, rims and valves/Agricultural tyres and rims
11 Houston (USA) TC 35/SC 9 Paints and varnishes/General test meth-ods for paints and varnishes
11 Houston (USA) TC 35/SC 14 Paints and varnishes/Protective paint systems for steel structures
11 York (United Kingdom)
TC 238 Solid biofuels
11 Grasmere (Unit-ed Kingdom)
** TC 268/SC 1 Sustainable develop-ment in communities/Smart community infrastructures
11-12 Paris (France) TC 24/SC 4 Particle charac-terization includ-ing sieving/Particle characterization
11-12 Southamp-ton (United Kingdom)
TC 211 Geographic in-formation/Geomatics
12 Zedelgem (Belgium)
TC 23/SC 7 Tractors and machin-ery for agriculture and forestry/Equipment for harvesting and conservation
15 Virtual (Unknown)
President's committee
President's committee
15-16 Düsseldorf (Germany)
TC 17/SC 11 Steel/Steel castings
ISO Update, Supplement to ISO Focus -- April 2015 21
15-16 Kyoto (Japan) TC 22/SC 32 Road vehicles/Elec-trical and electronic components and gen-eral system aspects
15-18 Vancouver (Canada)
TC 22/SC 39 Road vehicles/Ergonomics
15-18 Boras (Sweden) TC 85/SC 2 Nuclear energy, nuclear technologies, and radiological pro-tection/Radiological protection
15-19 London (United Kingdom)
PC 277 Sustainable procurement
15-19 Vancouver (Canada)
** TC 22/SC 13 Road vehicles/Ergo-nomics applicable to road vehicles
15-19 Munich (Germany)
TC 94/SC 14 Personal safety -- Protective clothing and equipment/Fire-fighters' personal equipment
16-17 Zurich (Switzerland)
TC 17/SC 17 Steel/Steel wire rod and wire products
17-19 Berlin (Germany) TC 172/SC 9 Optics and photon-ics/Electro-optical systems
18-19 Stuttgart (Germany)
TC 184/SC 2 Automation systems and integration/Robots and robotic devices
18-19 Geneva (Switzerland)
TMB Technical Manage-ment Board
19 Beijing (China) TC 220 Cryogenic vessels
21-26 Matsue (Japan) TC 37 Terminology and other language and content resources
22-23 Dallas (USA) * TC 20/SC 17 Aircraft and space vehicles/Airport infrastructure
22-25 Avignon (France) TC 54 Essential oils
22-25 Stockholm (Sweden)
** TC 149 Cycles
22-26 Rouen (France) JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training
22-26 Gjøvik (Norway) * JTC 1/SC 37 Information technology/Biometrics
22-26 (Netherlands) ** TC 34/SC 9 Food products/Microbiology
22-26 Dalian (China) TC 69 Applications of statis-tical methods
22-26 Dalian (China) TC 69/SC 5 Applications of sta-tistical methods/Ac-ceptance sampling
22-26 Dalian (China) TC 69/SC 6 Applications of statis-tical methods/Meas-urement methods and results
22-26 Dalian (China) TC 69/SC 8 Applications of sta-tistical methods/Ap-plication of statistical and related methodol-ogy for new technol-ogy and product development
22-26 La Plaine St-Denis (France)
TC 94/SC 6 Personal safety -- Protective clothing and equipment/Eye and face protection
22-26 Göteborg (Sweden)
* TC 188 Small craft
24 Porto (Portugal) ** TC 17/SC 15 Steel/Railway rails, rails fasteners, wheels and wheelsets
24-25 Düsseldorf (Germany)
TC 17/SC 4 Steel/Heat treatable and alloy steels
24-26 St. Peters-burg (Russian Federation)
* TC 20/SC 1 Aircraft and space vehicles/Aerospace electrical requirements
25 Göteborg (Sweden)
* TC 188/SC 2 Small craft/Engines and propulsion systems
26 Gaithersburg (USA)
TC 12 Quantities and units
27 Warsaw (Poland) * JTC 1/SC 29 Information technol-ogy/Coding of audio, picture, multimedia and hypermedia information
Montreal (Canada)
** JTC 1/SC 31 Information technol-ogy/Automatic iden-tification and data capture techniques
June-July 2015
30-3 Milan (Italy) * TC 193 Natural gas
30-3 Milan (Italy) * TC 193/SC 1 Natural gas/Analysis of natural gas
30-3 Milan (Italy) * TC 193/SC 3 Natural gas/Upstream area
2nd Quarter 2015
Istanbul (Turkey) ** TC 120 Leather
July 2015
1-7 Berlin (Germany) * TC 91 Surface active agents
2-3 Shanghai (China) TC 8/SC 4 Ships and marine technology/Outfitting and deck machinery
6-7 Helsinki (Finland) ** TC 44/SC 10 Welding and allied processes/Unification of requirements in the field of metal welding
7-8 Helsinki (Finland) TC 44/SC 7 Welding and allied processes/Represen-tation and terms
8 Helsinki (Finland) TC 44/SC 5 Welding and allied processes/Testing and inspection of welds
8 Helsinki (Finland) TC 44/SC 9 Welding and allied processes/Health and safety
8 Bath (United Kingdom)
TC 184/SC 1 Automation systems and integration/Physi-cal device control
8-9 Berlin (Germany) TC 51 Pallets for unit load method of materials handling
9-10 Helsinki (Finland) TC 44 Welding and allied processes
14-17 Shanghai (China) TC 8/SC 8 Ships and marine technology/Ship design
22 ISO Update, Supplement to ISO Focus -- April 2015
16 Berlin (Germany) TC 261 Additive manufacturing
31 Arlington (USA) TC 86/SC 6 Refrigeration and air-conditioning/Testing and rating of air-conditioners and heat pumps
Hangzhou (China)
** TC 8/SC 13 Ships and marine technology/Marine technology
August 2015
24-28 Toronto (Canada) * TC 258 Project, programme and portfolio management
25-26 London (United Kingdom)
TC 105 Steel wire ropes
26-28 Jeju (Korea, Republic of)
* TC 206 Fine ceramics
August-September 2015
31-4 Hokaido (Japan) * JTC 1/SC 35 Information technol-ogy/User interfaces
September 2015
4-12 New Delhi (India) ** TC 207 Environmental management
7 Tedding-ton (United Kingdom)
* TC 164/SC 2 Mechanical testing of metals/Ductility testing
7-11 Tokyo (Japan) TC 133 Clothing sizing sys-tems - size designa-tion, size measure-ment methods and digital fittings
7-11 Paris (France) * TC 153 Valves
7-11 Tedding-ton (United Kingdom)
TC 164 Mechanical testing of metals
7-14 Sydney (Australia)
** TC 96 Cranes
8-10 Tedding-ton (United Kingdom)
* TC 164/SC 5 Mechanical testing of metals/Fatigue testing
9 Tedding-ton (United Kingdom)
* TC 164/SC 1 Mechanical testing of metals/Uniaxial testing
9 Tedding-ton (United Kingdom)
* TC 164/SC 4 Mechanical testing of metals/Toughness testing -- Fracture (F), Pendulum (P), Tear (T)
10 Tedding-ton (United Kingdom)
* TC 164/SC 3 Mechanical testing of metals/Hardness testing
13 Seoul (Korea, Republic of)
* President's committee
President's committee
13 Seattle (USA) ** TC 201/SC 6 Surface chemi-cal analysis/Sec-ondary ion mass spectrometry
13-17 Lahaina, Hawaii (USA)
** TC 127 Earth-moving machinery
14 Seoul (Korea, Republic of)
* COUNCIL Council
14-15 Washington, D.C (USA)
* JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces
14-17 Washington, D.C (USA)
TC 157 Non-systemic con-traceptives and STI barrier prophylactics
14-18 Milan (Italy) * TC 43 Acoustics
14-18 Berlin (Germany) ** TC 150 Implants for surgery
14-18 (Canada) ** TC 205 Building environment design
14-25 Berlin (Germany) * TC 213 Dimensional and geometrical product specifications and verification
15 Seoul (Korea, Republic of)
* DEVCO Committee on devel-oping country matters
15 Vienna (Austria) * TC 33 Refractories
15 Seoul (Korea, Republic of)
* TMB Technical Manage-ment Board
15-17 Pittsburgh (USA) TC 94/SC 15 Personal safety -- Protective clothing and equipment/Respiratory protective devices
16-18 Seoul (Korea, Republic of)
* GA General Assembly
17 Seoul (Korea, Republic of)
* CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)
17-18 Delft (Netherlands)
TC 67 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries
17-18 (Canada) ** TC 163 Thermal performance and energy use in the built environment
18-19 Hawaii (USA) TC 23/SC 14 Tractors and machin-ery for agriculture and forestry/Operator controls, operator symbols and other displays, operator manuals
20-26 Williamsburg (USA)
* TC 27 Solid mineral fuels
21-24 Delft (Netherlands)
** TC 146/SC 1 Air quality/Stationary source emissions
21-25 Poznan (Poland) ** TC 23/SC 6 Tractors and machin-ery for agriculture and forestry/Equipment for crop protection
21-25 Delft (Netherlands)
** TC 146/SC 6 Air quality/Indoor air
23-24 (China) ** TC 290 Online reputation
24-25 Gouda (Netherlands)
* TC 34/SC 11 Food products/Animal and vegetable fats and oils
28-29 Basel (Switzerland)
** TC 44/SC 8 Welding and allied processes/Equip-ment for gas welding, cutting and allied processes
29-30 Tokyo (Japan) * TC 44/SC 3 Welding and allied processes/Welding consumables
(Europe) ** TC 22/SC 19 Road vehicles/Wheels
14-18 Milan (Italy) * TC 43/SC 1 Acoustics/Noise
14-18 Milan (Italy) TC 43/SC 2 Acoustics/Building acoustics
Berlin (Germany) ** TC 146/SC 2 Air quality/Workplace atmospheres
ISO Update, Supplement to ISO Focus -- April 2015 23
Johor Bahru (Malaysia)
** TC 165 Timber structures
September-October 2015
27-3 Bangkok (Thailand)
* TC 106 Dentistry
28-2 Kuala Lumpur (Malaysia)
** PC 278 Anti-bribery manage-ment systems
28-2 Paris (France) TC 86/SC 1 Refrigeration and air-conditioning/Safety and environmental requirements for re-frigerating systems
28-2 Edmonton (Canada)
TC 229 Nanotechnologies
October 2015
1 Rome (Italy) * TC 39/SC 4 Machine tools/Wood-working machines
2 Paris (France) TC 86/SC 8 Refrigeration and air-conditioning/Refriger-ants and refrigeration lubricants
5 Bloomington (USA)
** TC 23/SC 13 Tractors and machin-ery for agriculture and forestry/Powered lawn and garden equipment
5 Madrid (Spain) TC 59 Buildings and civil engineering works
5-9 Dublin (Ireland) * JTC 1/SC 38 Information technol-ogy/Cloud Comput-ing and Distributed Platforms
5-9 Madrid (Spain) * TC 59/SC 3 Buildings and civil engineering works/Functional/user requirements and performance in build-ing construction
5-9 Madrid (Spain) * TC 59/SC 15 Buildings and civil engineering works/Performance descrip-tion of houses
5-9 Madrid (Spain) * TC 59/SC 16 Buildings and civil engineering works/Accessibility and usability of the built environment
5-9 Vienna (Austria) * TC 190 Soil quality
5-9 Vienna (Austria) * TC 190/SC 2 Soil quality/Sampling
5-9 Vienna (Austria) * TC 190/SC 3 Soil quality/Chemi-cal methods and soil characteristics
5-9 Vienna (Austria) * TC 190/SC 4 Soil quality/Biological methods
5-9 Vienna (Austria) * TC 190/SC 7 Soil quality/Soil and site assessment
6 Lyon (France) * IULTCS International Union of Leather Technolo-gists and Chemists Societies
8 Virtual (Unknown)
* President's committee
President's committee
8-9 Sao Paulo (Brazil)
* TC 58/SC 2 Gas cylinders/Cylin-der fittings
9 Copenhagen (Denmark)
* TC 254 Safety of amusement rides and amusement devices
12-16 Paris (France) * TC 34/SC 17 Food products/Man-agement systems for food safety
12-16 Turin (Italy) ** TC 70 Internal combustion engines
12-16 Beijing (China) * TC 181 Safety of toys
12-17 Beijing (China) * TC 20 Aircraft and space vehicles
12-17 Beijing (China) * TC 20/SC 4 Aircraft and space vehicles/Aerospace fastener systems
12-17 Beijing (China) * TC 20/SC 8 Aircraft and space vehicles/Aerospace terminology
13 Lyon (France) * TC 38/SC 1 Textiles/Tests for coloured textiles and colorants
13 Lyon (France) * TC 38/SC 2 Textiles/Cleansing, finishing and water resistance tests
13-14 Osaka (Japan) * TC 24/SC 4 Particle charac-terization includ-ing sieving/Particle characterization
14 Lyon (France) * TC 38/SC 23 Textiles/Fibres and yarns
14 Lyon (France) * TC 38/SC 24 Textiles/Condition-ing atmospheres and physical tests for textile fabrics
15 Lyon (France) * TC 38 Textiles
15-17 Seattle (USA) * TC 201 Surface chemical analysis
16 San Diego (USA) * TC 22/SC 34 Road vehicles/Propul-sion, powertrain and powertrain fluids
18-23 Vichy (France) TC 45 Rubber and rubber products
18-23 Vichy (France) TC 45/SC 4 Rubber and rubber products/Products (other than hoses)
18-23 Baltimore (USA) * TC 184/SC 4 Automation systems and integration/Indus-trial data
19-21 Jeju (Korea, Republic of)
* TC 281 Fine Bubble Technology
19-22 Vichy (France) TC 45/SC 1 Rubber and rubber products/Rubber and plastics hoses and hose assemblies
19-23 (Germany) ** TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools
19-23 Gaithersburg (USA)
* TC 92 Fire safety
19-23 Gaithersburg (USA)
* TC 92/SC 1 Fire safety/Fire initia-tion and growth
19-23 Brussels (Belgium)
TC 154 Processes, data elements and documents in com-merce, industry and administration
20 Metz (France) TC 173/SC 2 Assistive products for persons with disabil-ity/Classification and terminology
20-23 Oslo (Norway) ** TC 58/SC 3 Gas cylinders/Cylin-der design
20-23 Beijing (China) * TC 269 Railway applications
24 ISO Update, Supplement to ISO Focus -- April 2015
21-23 Katowize (Poland)
TC 263 Coalbed methane (CBM)
21-24 Santiago (Chile) * TC 195 Building construc-tion machinery and equipment
22-23 London (United Kingdom)
* TC 79/SC 2 Light metals and their alloys/Or-ganic and anodic oxidation coatings on aluminium
22-23 Berlin (Germany) * TC 209 Cleanrooms and as-sociated controlled environments
26-29 Pretoria (South Africa)
** TC 264 Fireworks
26-30 St. Peters-burg (Russian Federation)
TC 8 Ships and marine technology
26-30 Porto Alegre (Brazil)
TC 23/SC 17 Tractors and machin-ery for agriculture and forestry/Manu-ally portable forest machinery
26-31 (China) ** JTC 1 Information technology
27-29 Berlin (Germany) * TC 256 Pigments, dyestuffs and extenders
28-30 Tsukuba (Japan) ** TC 202 Microbeam analysis
29 Seoul (Korea, Republic of)
* TC 71 Concrete, reinforced concrete and pre-stressed concrete
29-30 Tampa, Florida (USA)
* TC 17/SC 12 Steel/Continuous mill flat rolled products
(Unknown) ** TC 2 Fasteners
Madrid (Spain) ** TC 10/SC 8 Technical prod-uct documenta-tion/Construction documentation
(Netherlands) ** TC 34/SC 2 Food products/Ole-aginous seeds and fruits and oilseed meals
Washington, D.C (USA)
** TC 79 Light metals and their alloys
Rio de Janeiro (Brazil)
** TC 130 Graphic technology
Sao Paulo (Brazil)
** TC 135/SC 9 Non-destructive test-ing/Acoustic emission testing
(Turkey) ** TC 180 Solar energy
(Germany) ** TC 244 Industrial furnaces and associated pro-cessing equipment
(China) ** TC 282/SC 3 Water re-use/Risk and performance evaluation of water re-use systems
November 2015
2 Atlanta (USA) * TC 41/SC 3 Pulleys and belts (including veebelts)/Conveyor belts
2-6 Bern (Switzerland)
TC 215 Health informatics
2-6 Beijing (China) * TC 282 Water re-use
3 Atlanta (USA) * TC 41/SC 1 Pulleys and belts (including veebelts)/Friction
3 Berlin (Germany) * TC 83 Sports and other recreational facilities and equipment
3-5 Montreal (Canada)
TC 20/SC 9 Aircraft and space vehicles/Air cargo and ground equipment
4 Atlanta (USA) TC 41/SC 4 Pulleys and belts (including veebelts)/Synchronous belt drives
5 Atlanta (USA) * TC 41 Pulleys and belts (including veebelts)
9-12 (Spain) ** TC 189 Ceramic tile
9-13 London (United Kingdom)
* PC 287 Chain of custody of wood and wood-based products
9-13 Kobe (Japan) * TC 21 Equipment for fire protection and fire fighting
9-13 Tokyo (Japan) TC 94/SC 15 Personal safety -- Protective clothing and equipment/Respiratory protective devices
9-13 Sydney (Australia)
* TC 275 Sludge recovery, recycling, treatment and disposal
9-14 Galveston (USA) * TC 260 Human resource management
10-13 (Switzerland) ** TC 112 Vacuum technology
11 Notting-ham (United Kingdom)
* TC 60 Gears
11-13 (Malaysia) ** TC 123 Plain bearings
12-13 Kuala Lumpur (Malaysia)
** TC 227 Springs
16 (USA) ** PC 252 Natural gas fuelling stations for vehicles
16-20 (Ghana) ** TC 36 Cinematography
16-20 Kyoto (Japan) TC 160 Glass in building
16-20 (USA) ** TC 210 Quality management and corresponding general aspects for medical devices
16-21 Washington, D.C (USA)
* TC 98/SC 3 Bases for design of structures/Loads, forces and other actions
20-28 Hong Kong (Hong Kong, China)
* TC 176 Quality management and quality assurance
Pretoria (South Africa)
** TC 212 Clinical laboratory testing and in vitro di-agnostic test systems
November-December 2015
16-21 Virginia (USA) TC 98 Bases for design of structures
December 2015
3-4 Torrance (USA) * TC 197 Hydrogen technologies
10 Berlin (Germany) * TC 44/SC 6 Welding and allied processes/Resistance welding and allied mechanical joining
14-18 Berlin (Germany) TC 198 Sterilization of health care products
(United Arab Emirates)
** TC 217 Cosmetics
ISO Update, Supplement to ISO Focus -- April 2015 25
4th Quarter 2015
(Sweden) ** TC 17/SC 1 Steel/Methods of de-termination of chemi-cal composition
Dayton, Ohio (USA)
** TC 159/SC 3 Ergonomics/An-thropometry and biomechanics
Tel Aviv (Israel) ** TC 282 Water re-use
(Indonesia) ** TC 292 Security
2nd Semester 2015
(France) ** TC 172/SC 1 Optics and photon-ics/Fundamental standards
Month unknown 2015
Berlin (Germany) ** TC 138 Plastics pipes, fittings and valves for the transport of fluids
(Japan) ** TC 142 Cleaning equipment for air and other gases
January 2016
25-29 London (United Kingdom)
** TC 107 Metallic and other inorganic coatings
25-29 London (United Kingdom)
** TC 107/SC 3 Metallic and other inorganic coatings/Electrodeposited coatings and related finishes
25-29 London (United Kingdom)
** TC 107/SC 8 Metallic and other inorganic coatings/Chemical conversion coatings
(China) ** TC 120 Leather
February 2016
26 Nairobi (Kenya) * TMB Technical Manage-ment Board
(South Africa) ** TC 58/SC 4 Gas cylinders/Opera-tional requirements for gas cylinders
(USA) ** TC 213 Dimensional and geometrical product specifications and verification
(United Kingdom)
** TC 257 Evaluation of energy savings
March 2016
3-4 (Unknown) ** TC 182/SC 1 Geotechnics/Geo-technical investiga-tion and testing
14-18 Sydney (Australia)
** TC 108/SC 2 Mechanical vibration, shock and condition monitoring/Measure-ment and evalua-tion of mechanical vibration and shock as applied to ma-chines, vehicles and structures
14-18 Sydney (Australia)
** TC 108/SC 5 Mechanical vibration, shock and condition monitoring/Condition monitoring and diag-nostics of machine systems
17-18 Geneva (Switzerland)
* COUNCIL Council
1st Quarter 2016
Singapore (Singapore)
** TC 67/SC 7 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Offshore structures
April 2016
11-15 Sydney (Australia)
** TC 178 Lifts, escalators and moving walks
Seoul (Korea, Republic of)
** TC 161 Control and protec-tive devices for gas and/or oil burners and appliances
May 2016
25 Brussels (Belgium)
** TC 115 Pumps
(Brazil) ** TC 67/SC 4 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Drilling and produc-tion equipment
(India) ** TC 85 Nuclear energy, nuclear technolo-gies, and radiological protection
(Korea, Repub-lic of)
** TC 122 Packaging
Stockholm (Sweden)
** TC 130 Graphic technology
(USA) ** TC 282/SC 3 Water re-use/Risk and performance evaluation of water re-use systems
June 2016
15-16 Geneva (Switzerland)
* TMB Technical Manage-ment Board
18-20 Munich (Germany)
TC 135 Non-destructive testing
(Germany) ** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training
(Europe) ** TC 22/SC 38 Road vehicles/Motor-cycles and mopeds
2nd Quarter 2016
(Germany) ** TC 34/SC 4 Food products/Cere-als and pulses
1st Semester 2016
(France) ** TC 23 Tractors and machin-ery for agriculture and forestry
New Delhi (India) ** TC 34/SC 7 Food products/Spic-es, culinary herbs and condiments
(China) ** TC 34/SC 16 Food products/Hori-zontal methods for molecular biomarker analysis
September 2016
19 Beijing (China) * COUNCIL Council
20 Beijing (China) * TMB Technical Manage-ment Board
21-23 Beijing (China) * GA General Assembly
26 ISO Update, Supplement to ISO Focus -- April 2015
Vienna (Austria) ** JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces
Paris (France) ** TC 17 Steel
Sao Paulo (Brazil)
** TC 209 Cleanrooms and as-sociated controlled environments
Shanghai (China) ** TC 213 Dimensional and geometrical product specifications and verification
Beijing (China) ** TC 256 Pigments, dyestuffs and extenders
3rd Quarter 2016
(USA) ** TC 289 Brand evaluation
October 2016
17-21 (China) ** TC 5/SC 2 Ferrous metal pipes and metallic fittings/Cast iron pipes, fit-tings and their joints
20-21 London (United Kingdom)
* TC 58 Gas cylinders
(Brazil) ** TC 59 Buildings and civil engineering works
(Korea, Repub-lic of)
** TC 201 Surface chemical analysis
(Israel) ** TC 282/SC 3 Water re-use/Risk and performance evaluation of water re-use systems
November 2016
(Norway) ** JTC 1 Information technology
4th Quarter 2016
Delft (Netherlands)
** TC 28 Petroleum products and related products of synthetic or bio-logical origin
Delft (Netherlands)
** TC 28/SC 5 Petroleum products and related products of synthetic or bio-logical origin/Meas-urement of refriger-ated hydrocarbon and non-petroleum based liquefied gaseous fuels
Delft (Netherlands)
** TC 28/SC 7 Petroleum products and related products of synthetic or bio-logical origin/Liquid Biofuels
Month unknown 2016
(Korea, Repub-lic of)
** JTC 1/SC 23 Information technolo-gy/Digitally Recorded Media for Informa-tion Interchange and Storage
(Russian Federation)
** REMCO Committee on refer-ence materials
(Denmark) ** TC 37 Terminology and other language and content resources
(South Africa) ** TC 44 Welding and allied processes
(Malaysia) ** TC 45 Rubber and rubber products
Wellington (New Zealand)
** TC 46 Information and documentation
Wellington (New Zealand)
** TC 46/SC 11 Information and doc-umentation/Archives/records management
(Sweden) ** TC 102 Iron ore and direct reduced iron
(Japan) ** TC 138/SC 2 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for water supplies
(Japan) ** TC 183 Copper, lead, zinc and nickel ores and concentrates
June 2017
(Australia) ** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training
September 2017
London (United Kingdom)
** JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces
New Delhi (India) ** TC 178 Lifts, escalators and moving walks
3rd Quarter 2017
Vienna (Austria) ** TC 289 Brand evaluation
June 2018
(Korea, Repub-lic of)
** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training