substation fittings - gv kinsman electrical products - … substation fittings 14-3 substation...
TRANSCRIPT
Substation Fittings
www.dulmison.com.au14-2
Sub
stat
ion
Fitt
ing
s
M12M10M12M10M12M10M12M12M10M12M12M12M12M16M16M16M16M16
3736414146465652575770767698103103110110
38374246515159545959727879100105105111112
Busbar support clamps are cast to size in Aluminium Alloy and fittedwith stainless steel bolts. Clamps may be converted from clamping tosliding type or vice versa, by simply reversing the cap.
Fittings on this page have a minimum current rating, in line with the maximum Australian Standardconductor size or busbar size that the fitting can accept.
Aluminium Busbar Support ClampsType ABS
ABS15ABS17ABS25ABS30ABS35ABS40ABS42ABS45ABS50ABS55ABS60ABS65ABS70ABS75ABS80ABS85ABS100ABS102
12.715.919.125.425.431.841.331.838.138.150.857.260.363.580.076.288.9100.0
212325252527332932334043435454546061
76517651765176765176767676127127127127127
252525323838383832383838385151515151
Dimensions mmA B C K R S
O.D. Tubemm
Cat. No.
K Bolt size
Clamped Sliding
B
R S
A
C
www.dulmison.com.au
Substation Fittings
14-3
Sub
stat
ion
Fitt
ing
s
B
C
R S
A
K Bolt size
Busbar support clamps are cast to size in high strengthcopper alloy. Standard bolts are stainless steel. Clampsmay be converted from clamping to sliding type or viceversa, by simply reversing the cap.
Busbar Support ClampType BS - Copper
Note: Adaptor plate part No. E8045 available to suit 127mm PCD insulators and above BS typeconnectors.Fittings on this page have a minimum current rating, in line with the maximum Australian Standardconductor size or busbar size that the fitting can accept.
M10M10M12M10M10M12M10M12M10M12M10M12M12M16
25.431.736.538.134.939.746.041.249.242.853.949.268.282.5
26.933.338.136.536.541.247.642.850.844.455.550.869.884.1
BS5BS10BS15BS17BS20BS25BS30BS35BS40BS45BS50BS55BS60BS70
6.3512.7012.7015.8819.0519.0525.4025.4031.7531.7538.1038.1050.8063.50
14.019.019.022.022.025.425.425.428.528.531.731.738.044.5
50.850.876.250.850.876.250.876.250.876.250.876.276.2127.0
25.428.528.525.428.528.528.528.528.528.528.528.528.531.7
Dimensions mmA B C K R S
O.D. Tubemm
Cat. No.
Substation Fittings
14-4
Sub
stat
ion
Fitt
ing
s
www.dulmison.com.au
These connectorsprovide an inexpensivetube to flat termination.They also combine withthe flexible braidconnections to provideexpansion jointsbetween tubes in lines,tubes at right angles andbetween tube and flat terminals.Connectors can be supplied with stainlesssteel bolts and nuts.
Tube Connector Busbar to FlatType TF - Copper; ATF - Aluminium
TF10BTF15BTF20BTF25BTF30BTF34BTF35BTF40BTF45B
TF4522BTF45ABTF46BTF47BTF49BTF50BTF52BTF53BTF54BTF55BTF56BTF57BTF60BTF65BTF67BTF70BTF75B
TF10TF15TF20TF25TF30TF34TF35TF40TF45
TF4522TF45ATF46TF47TF49TF50TF52TF53TF54TF55TF56TF57TF60TF65TF67TF70TF75
12.715.915.919.119.125.425.425.425.425.427.028.628.630.031.834.035.038.138.138.140.048.050.860.063.576.2
11212112222122222122222222
3232323835444441414043444446485151575460566467808495
Dimensions mmA
O.D. Tubemm
Fig.No.
Cat. No.
2525482548222948547654295454545454225476555754545454
B
545454575757606064766460647070707070768376838998105114
C
------22---22------22295129---2929292929---2944292929292929
D
2929293232383838385138383844444444515154515764738089
E
M10M19M10M10M10M10M10M10M10M10M10M10M10M10M12M10M10M10M10M12M10M10M10M10M10M10
BoltSize
Note: To order in aluminium, add prefix 'A' to catalogue number.Fittings on this page have a minimum current rating, in line with the maximum Australian Standardconductor size or busbar size that the fitting can accept.
Without Bolts With Bolts
C
B
A
10mmFig. 1 Fig. 2
D
E
C
B
E
www.dulmison.com.au
Substation Fittings
14-5
Sub
stat
ion
Fitt
ing
s
For the connection of tubular busbar to switchgear terminalplates with four 14mm diameter holes at 50mm centres.Two PTC connectors are required per termination.Materials: High copper content alloy castings. Stainlesssteel bolts, washers and nuts.
Fittings on this page have a minimum current rating, in line with the maximum Australian Standardconductor size or busbar size that the fitting can accept.
Tube ConnectorType PTC - Copper
PTC4010PTC4012PTC4020
25.430.238.1
525768
Dimension Amm
O.D. Tubemm
Cat. No.
A
50mm 25mm
13mm
Substation Fittings
www.dulmison.com.au14-6
Sub
stat
ion
Fitt
ing
s
Type AST straight connectors are cast to sizein high strength aluminium alloy and fitted withstainless steel bolts and nuts. Both connectorhalves are identical.
Aluminium Straight Connector Busbar to BusbarType AST
AST5AST20AST35AST50AST85AST86AST88AST90AST95
AST80MAST100
AST100M
19.125.431.838.150.857.260.363.576.280.088.9101.6
105127152152178191191191216178216184
M10
M12
LengthL mm
O.D. Tubemm
Cat. No. Bolt Size
Fittings on this page have a minimum current rating, in line with the maximum Australian Standardconductor size or busbar size that the fitting can accept.
L
www.dulmison.com.au
Substation Fittings
14-7
Sub
stat
ion
Fitt
ing
s
This heavy duty connector is cast to size. Theminute surface projections provide a multiplepoint high pressure contact which gives a lowresistance joint. Both connector halves areidentical. Connectors are supplied withstainless steel bolts, nuts and spring washers.
Straight Connector Busbar to BusbarType ST - Copper
ST5ST20
ST20CST27ST35ST50ST85ST95
19.125.425.428.631.838.150.876.2
11221122
O.D. of Tube mm Fig.Cat. No.
7083127140102102159229
M10M12M10M10M12M12M12M12
BoltSize
DimensionL mm
Fittings on this page have a minimum current rating, in line with the maximum Australian Standardconductor size or busbar size that the fitting can accept.
Fig. 1
Fig. 2
L
Substation Fittings
www.dulmison.com.au14-8
Sub
stat
ion
Fitt
ing
s
The type RS reducer is designed for use with solidcopper busbar tube and equipment studs.Materials: High copper content alloy casting. Stainlesssteel bolts, washers and nuts.
Reducer Busbar or StudsType RS - Copper
RS1110RS1210RS1508RS1509RS1511RS1512RS1514RS1610RS1818
28.630.238.138.138.138.138.139.744.5
25.425.422.225.028.630.234.925.444.5
O.D. of Tube mmTapRun
Cat. No.
575760606060606076
A
515157575454545776
B
108108117117114114114117152
M10M10M10M10M10M10M10M10M12
LBoltSize
Dimensions mm
Fittings on this page have a minimum current rating, in line with the maximum Australian Standardconductor size or busbar size that the fitting can accept.
B
L
Bolt size
A
www.dulmison.com.au
Substation Fittings
14-9
Sub
stat
ion
Fitt
ing
s
The type RT is a two piece design suitable for use withtubular busbar. It is cast in high copper content alloy andfitted with stainless steel bolts, nuts and spring washers.
Reducer BusbarsType RT - Copper
RT15RT30
RT32CRT45RT47RT60RT65RT75RT80RT90
25.431.831.838.138.144.544.550.850.876.2
19.119.125.425.430.225.431.825.438.138.1
O.D. of Tube mmTapRun
Cat. No.
44485751515462546464
A
35325651514446444851
B
79791141021029810898111114
M10M10M10M12M12M12M12M12M12M12
LBoltSize
Dimensions mm
Fittings on this page have a minimum current rating, in line with the maximum Australian Standardconductor size or busbar size that the fitting can accept.
B
L
A
Substation Fittings
www.dulmison.com.au14-10
Sub
stat
ion
Fitt
ing
s
Type ATT tee connectors are cast to size in high strengthaluminium alloy. Both connector halves are identical.Supplied with stainless steel bolts and nuts.
Aluminium Tee Connector Busbar to BusbarType ATT
ATT28ATT35
ATT3830ATT50ATT75
ATT2020ATT2410ATT2413ATT2415ATT88ATT89ATT93ATT95
ATT8064ATT8080ATT99ATT100ATT3535ATT10060ATT10080ATT100100ATT4525ATT11480ATT4533
28.631.838.138.150.850.860.360.360.360.363.576.276.280.080.088.988.988.9100.0100.0100.0114.3114.3114.3
25.431.830.038.125.450.825.431.838.160.363.550.876.263.580.050.860.388.960.380.0100.063.580.082.6
Conductor Range OD mmTapRun
Cat. No.
75108106111108127114114114133137130175184175143146197201202305194210210
A
111152149156159178171171171187191194238248238222219270282283283292298298
L
44838690761028910210210812199114114114105108146127143143117152152
M10M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M16M16M16M12M16M16
WBoltSize
Dimensions mm
Fittings on this page have a minimum current rating, in line with the maximum Australian Standardconductor size or busbar size that the fitting can accept.
W
A
L
www.dulmison.com.au
Substation Fittings
14-11
Sub
stat
ion
Fitt
ing
s
This heavy duty connector is cast to size. The minute surface projections provide a multiple pointhigh pressure contact which gives a low resistance joint. Both connector halves are identical.Connectors are supplied with stainless steel bolts and nuts. Refer to table on adjoining page forconductor ranges and dimensions.
Fittings on this page have a minimum current rating, in line with the maximum Australian Standardconductor size or busbar size that the fitting can accept.
Tee Connector Conductor to ConductorType TT - Copper
W
WW
AL
Fig. 1 Fig. 3
Fig. 2
Substation Fittings
www.dulmison.com.au14-12
Sub
stat
ion
Fitt
ing
s
Tee ConnectorType TT - Copper
TT3TT5TT7TT10TT15TT17TT20
TT20CTT21TT25TT27TT28TT30TT32TT35TT40TT45
TT45CTT50
TT50CTT55TT60TT65TT70TT75TT78TT79TT80TT83TT84TT85TT86TT88TT90TT95TT100
15.919.120.619.125.422.225.425.428.625.428.630.231.831.831.831.838.138.138.138.138.144.544.544.550.848.450.850.848.448.450.854
63.576.276.288.9
15.919.120.625.419.120.625.425.428.638.115.925.419.125.431.844.525.425.438.138.150.825.431.844.525.431.831.838.150.848.450.850.838.138.176.260.3
111111121121111212222112122222222232
Dimensions mmO.D. of Tube mmTapRun
Fig.No.
Cat. No.
5557576862687068718773756475761027676105801108011011084102102108116116116116114114156140
A
8083839892981039810712110811195111114138117114146117149124156154133151151157164164162168168178216211
L
3538384438444376444450444444448650928392975073895090909095959595958395109
W
M10M10M10M12M10M12M12M10M12M12M10M12M10M12M12M12M12M10M12M10M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12M12
BoltSize
www.dulmison.com.au
Substation Fittings
14-13
Sub
stat
ion
Fitt
ing
s
Aluminium Terminal Lug Busbar to PalmType ABT
For terminating tubular aluminium busbar at switchgear palms. Castings are inhigh strength aluminium. Bolts and nuts are stainless steel.
Note: Details of unlisted sizes available on request.Fittings on this page have a minimum current rating, in line with the maximumAustralian Standard conductor size or busbar size that the fitting can accept.
ABT20ABT30ABT40ABT50ABT54ABT57ABT63ABT64ABT80ABT95ABT105
25.431.838.150.857.260.361.063.580.076.288.9
38386783838383838383102
38383850------505050------
Dimensions mmA
O.D. Tubemm
No. of holesin Palm
Cat. No.
16161616------301615------
B
8383767680838383838383
C
838386100105108100100130171140
D
M12M12M12M12------
M12M12M12------
E
162162156165168171172172172172184
K
1010111414141414161614
L
3232354244464646575561
T
2244------244------
Z
E AB
B C
L
D
ZT
K Bolt size
Substation Fittings
www.dulmison.com.au14-14
Sub
stat
ion
Fitt
ing
s
Designed for tube to flat connections. Castings areof high copper content alloy. Lugs are machined onunderside. Lugs are supplied with stainless steelbolts and nuts. Note type BT20A is machined onboth sides of the lug.
Terminal Lug Busbar to PalmType BT - Copper
BT2BT3BT5BT10BT20
BT20ABT30BT33BT40BT46BT50
12.715.919.119.125.425.431.833.338.146.050.8
22211513344
2932323341384870707070
Dimensions mmA
O.D. Tubemm
Fig.No.
Cat. No.
---------2938---3838383838
B
1416161316191616161616
C
3232353544515151516470
D
3849525267595976808995
E
64707394121108127130130146152
L
M10M10M12M10M12M12M12M12M12M12M12
K
61010101061010111111
T
1616202023162630303737
Z
Fittings on this page have a minimum current rating, in line with the maximum Australian Standardconductor size or busbar size that the fitting can accept.
Fig. 1 Fig. 2
Fig. 3 Fig. 4 Fig. 5
K Bolt size
K Bolt size
D
Z
A
C
E
B
B
L
C
B C
B
B C
C
A
T
www.dulmison.com.au
Substation Fittings
14-15
Sub
stat
ion
Fitt
ing
s
Designed for terminating tubular aluminium busbar at right angles to the contact surface. Castingsare in high strength aluminium. Bolts and nuts are stainless steel.
Right Angle Aluminium Terminal Lug Busbar to PalmType ABT-L
Note: Details of unlisted sizes available on request.Fittings on this page have a minimum current rating, in line with the maximum Australian Standardconductor size or busbar size that the fitting can accept.
ABT30LABT40LABT57LABT250L
31.838.160.363.5
24---4
67678389
Dimensions mmA
O.D. Tubemm
No. of holesin Palm
Cat. No.
3838---38
B
1616---25
C
83767989
D
8187105111
E
156143185216
L
M12M12---
M12
K
13131414
T
K Bolt size
AB
C
E
L
D
T
B
Substation Fittings
www.dulmison.com.au14-16
Sub
stat
ion
Fitt
ing
s
For the connection of vertical tubular busbar toswitchgear terminal plates. Bolts, nuts and springwashers are stainless steel.
Right Angle Terminal Lug Busbar or Stud to PalmType LS - Copper
LS5LS7LS20
LS20CLS25
LS25CLS28ALS30LS40LS50LS54LS95
LS2018
19.122.225.425.430.230.230.231.838.150.857.276.230.2
7979761021021021408310210210210276
35354157675775435760736754
Dimensions mmE
O.D. Tubemm C
Cat. No.
44446464766476646073768364
H
133133143171184171235146184193200216143
L
10101013191313131313131310
T
M12M12M12M12M12M12M16M12M12M12M12M12M10
K
Fittings on this page have a minimum current rating, in line with the maximum Australian Standardconductor size or busbar size that the fitting can accept.
T
K Bolt size
C
E
50mm
50mm
H
L
www.dulmison.com.au
Substation Fittings
14-17
Sub
stat
ion
Fitt
ing
s
A heavy duty tube-to-conductor end connector. The adjustable tap takes a large range ofconductors which may be clamped before attaching to tubular bus.Materials: Cast aluminium alloy body, stainless steel bolts, U-bolts, washers and nuts.
Aluminium End Connector Busbar to ConductorType AE - Tube to Conductor
Fittings on this page have a minimum current rating, in line with the maximum Australian Standardconductor size or busbar size that the fitting can accept.
AE1065AE1265AE1365AE1565AE3065AE12102AE13102AE14102AE15102
AE80M837AE80M102AE10837AE60837AE15117AE35837AE2550
25.430.231.838.176.230.231.834.938.180.080.025.460.038.188.925.4
70 - 150
240 - 400
150 - 240240 - 400
150 - 240
400 - 500150 - 24035 - 95
10.70 - 15.75
20.25 - 25.65
15.75 - 20.2520.25 - 25.65
15.75 - 20.25
25.65 - 28.8015.75 - 20.257.65 - 12.46
Range for Aluminium & Cu Cond.mm2
O.D. Tubemm
Cat. No.Dia. Range
Substation Fittings
www.dulmison.com.au14-18
Sub
stat
ion
Fitt
ing
s
C
W
L
Fig. 2 Fig. 1
C
A heavy duty tube-to-conductor end connector. Theadjustable tap takes a large range of conductors shichmay be clamped before attaching to tubular bus.Materials: High copper content alloy casting with stainless steel bolts, U-bolts, washers and nuts.Fittings on this page have a minimum current rating, in line with the maximum Australian Standardconductor size or busbar size that the fitting can accept.
End Connector Busbar to ConductorType E - Copper, for connecting tube
to conductor
E5E10E15E17E20E25E30
E31CE32CE33CE35E40E45E46E50E55
E55CE60CE65E70E75E80E85E90
12.719.119.122.225.425.425.425.425.430.031.831.831.831.838.138.138.138.150.850.850.876.276.276.2
16 - 9525 - 9535 - 9525 - 9525 - 9535 - 9570 - 150150 - 240500 - 63070 - 15035 - 9570 - 150150 - 240240 - 40035 - 9570 - 15070 - 150150 - 24035 - 9570 - 150150 - 24035 - 9570 - 150150 - 240
5.10 - 12.606.42 - 12.607.65 - 12.606.42 - 12.606.42 - 12.607.65 - 12.6010.70 - 15.7515.75 - 20.2528.80 - 33.8010.70 - 15.757.65 - 12.6010.70 - 15.7515.75 - 20.2520.25 - 25.657.65 - 12.6010.70 - 15.7510.70 - 15.7515.75 - 20.257.65 - 12.6010.70 - 15.7515.75 - 20.257.65 - 12.6010.70 - 15.7515.75 - 20.25
111111122211121122111111
Conductor RangeArea mm2
O.D. TubeRun mm
Cat. No.O.D. mm
Fig.No.
31.735.035.035.035.035.044.560.376.263.550.850.850.876.250.850.876.276.250.850.850.857.157.157.1
CDimensions in mm
86.588.998.488.988.998.4117.5141.3190.5139.7117.5127.0136.5168.3117.5123.9149.3155.6117.5127.0130.1108.0127.0142.8
L
42.952.452.454.058.858.868.258.873.047.676.276.276.269.981.081.076.276.295.395.395.3127.0127.0127.0
W
Fittings on this page have a minimum current rating, in line with the maximum Australian Standardconductor size or busbar size that the fitting can accept.
www.dulmison.com.au
Substation Fittings
14-19
Sub
stat
ion
Fitt
ing
s
A heavy duty tube-to-cable tee connector. The adjustable tap takes a large range of cables whichmay be clamped before attaching to tubular bus.Materials: Cast aluminium alloy body, stainless steel bolts, U-bolts, washers and nuts.
Aluminium Tee Connector Busbar to ConductorType AT
AT2550AT1065AT10102AT301521AT3034AT1350AT1465AT14837AT1550AT15837AT15102AT50102AT2065AT2365AT2465AT24102AT3065AT80837AT80102AT3565AT35837AT351339AT100837AT100102
25.425.425.430.030.031.834.934.938.138.138.150.050.857.260.360.376.280.080.088.988.988.9100.0100.0
35 - 9570 - 150240 - 400175 - 345500 - 63035 - 9570 - 150150 - 24035 - 95
150 - 240240 - 400240 - 40070 - 15070 - 15070 - 150240 - 40070 - 150150 - 240240 - 40070 - 150150 - 240500 - 630150 - 240240 - 400
7.65 - 12.4610.70 - 15.7520.25 - 25.6515.00 - 21.0028.80 - 33.807.65 - 12.4610.70 - 15.7515.75 - 20.257.65 - 12.4615.75 - 20.2520.25 - 25.6520.25 - 25.6510.70 - 15.7510.70 - 15.7510.70 - 15.7520.25 - 25.6510.70 - 15.7515.75 - 20.2520.25 - 25.6510.70 - 15.7515.75 - 20.2528.80 - 32.7615.75 - 20.2520.25 - 25.65
Conductor Rangemm2
O.D. Tubemm
Cat. No.Dia. Range
Fittings on this pagehave a minimumcurrent rating, in linewith the maximumAustralian Standardconductor size orbusbar size that thefitting can accept.
Substation Fittings
www.dulmison.com.au14-20
Sub
stat
ion
Fitt
ing
s
A heavy duty tube-to-conductor tee connector. The adjustable tap takes a large range ofconductors which may be clamped before attaching to tubular bus. Refer to table on adjoiningpage for conductor ranges and dimensions.Materials: High copper content alloy casting. Stainless steel U-bolts, bolts, spring washers andnuts.
Tee Connector Busbar to ConductorType T - Copper; Tube run to conductor tap
W W
A
L
B
Fig. 1
Fig. 2
www.dulmison.com.au
Substation Fittings
14-21
Sub
stat
ion
Fitt
ing
s
Tee Connector Busbar to BusbarType T - Copper; Tube run to conductor tap
Fittings on this page have a minimum current rating, in line with the maximum Australian Standardconductor size or busbar size that the fitting can accept.
T10T15T20T25T30
T31CT33T35T40T45T46T48T50T55
T55CT60T64T65T69T70T75T77T80T85T90T105
19.119.125.425.425.425.430.231.831.831.831.834.138.138.138.138.140.050.848.450.850.860.376.276.276.288.9
25 - 9535 - 9525 - 9535 - 9570 - 150150 - 24070 - 15035 - 9570 - 150150 - 240240 - 40070 - 15035 - 9570 - 15070 - 150150 - 240630 - 80035 - 9570 - 15070 - 150150 - 24070 - 15035 - 9570 - 150150 - 240150 - 240
6.42 - 12.467.65 - 12.606.42 - 12.467.65 - 12.6010.70 - 15.7515.75 - 20.2510.70 - 15.757.65 - 12.6010.70 - 15.7515.75 - 20.2520.25 - 25.6510.70 - 15.757.65 - 12.6010.70 - 15.7510.70 - 15.7515.75 - 20.2532.76 - 37.057.65 - 12.6010.70 - 15.7510.70 - 15.7515.75 - 20.2510.70 - 15.757.65 - 12.6010.70 - 15.7515.75 - 20.2515.75 - 20.25
11111211112111212111111111
Conductor RangeArea mm2
O.D. TubeRun mm
Cat. No.O.D. mm
Fig.No.
81908492106110106103110117121110106113111119146111118121127130127137140151
ADimensions mm
51605060708070607076837360707076102607070767060707680
B
106117113121142140140142146156156148146152148159192156164168175187191200206222
3535353544604451515170515151765180515151515757575764
L W
Substation Fittings
www.dulmison.com.au14-22
Sub
stat
ion
Fitt
ing
s
Suitable for sub-station applications which requirerugged and vibration proof connections. Thelongitudinal wave cast in both connector base andclamping bar assures high pull-out strength.Connectors are supplied with stainless steel U-boltsand nuts.
Straight Connector Conductor to ConductorType SC - Copper
SC1SC2SC3SC4SC5SC7SC8SC9
16 - 3525
35 - 9570 - 15070 - 150150 - 240150 - 240150 - 240
5.10 - 7.656.42
7.65 - 12.4610.70 - 15.7510.70 - 15.7515.75 - 20.2515.75 - 20.2515.75 - 20.25
16 - 3525
35 - 9525
70 - 15025
70 - 150150 - 240
Conductor RangeRun Tap
O.D. O.D.Area mm2 Area mm2
Cat. No.Dimension
Lmm
5.10 - 7.656.75
7.65 - 12.606.75
10.70 - 15.756.75
10.70 - 15.7515.75 - 20.25
79105127127143149149156
Fittings on this page have a minimum current rating, in line with the maximum Australian Standardconductor size or busbar size that the fitting can accept.
3mm
L
www.dulmison.com.au
Substation Fittings
14-23
Sub
stat
ion
Fitt
ing
s
A high strength aluminium alloy tee connector for allaluminium and SCA run and tap conductors. U-boltsand nuts are stainless steel.
Aluminium Tee Connector Conductor to ConductorType ATC
Fittings on this page have a minimum current rating, in line with the maximum Australian Standardconductor size or busbar size that the fitting can accept.
ATC2ATC5ATC8ATC9ATC10ATC12ATC13ATC15
6.17 - 11.3510.20 - 16.3016.30 - 21.0016.30 - 21.0021.00 - 26.5021.00 - 26.5025.40 - 22.8025.40 - 33.80
6.17 - 11.3510.20 - 16.3010.20 - 16.3016.30 - 21.0016.30 - 21.0021.00 - 26.5016.30 - 21.0025.40 - 33.80
Conductor Range OD mmTapRun
Cat. No.
7192111110119127116130
A
94116137136156165157170
B
51708383898910289
CDimensions mm
C
A
B
Substation Fittings
www.dulmison.com.au14-24
Sub
stat
ion
Fitt
ing
s
Designed for substation applications such as strainbuses, suspension of long droppers and for makingimportant tee-off connections which require rugged andvibration- proof connectors. The longitudinal wave castin both the connector base and clamping bar assureshigh pull-out strength. Connectors are supplied withstainless steel U-bolts, and nuts.
Tee Connector Conductor to ConductorType TC - Copper
TC1TC2TC3TC4TC5TC6TC7TC8TC9TC12TC20
16 - 3525 - 7035 - 9570 - 15070 - 15070 - 150150 - 240150 - 240150 - 240240 - 400500 - 630
5.10 - 7.656.42 - 10.707.65 - 12.6010.70 - 15.7510.70 - 15.7510.70 - 15.7515.75 - 20.2515.75 - 20.2515.75 - 20.2520.25 - 25.6528.80 - 32.76
10 - 3525 - 7035 - 9525 - 7070 - 150150 - 24025 - 7070 - 150150 - 240240 - 400500 - 630
Conductor RangeRun Tap
O.D. O.D. A B CArea mm2 Area mm2
Cat. No.Dimensions mm
5.10 - 7.656.42 - 10.707.65 - 12.606.42 - 10.7010.70 - 15.7515.75 - 20.256.42 - 10.7010.70 - 15.7515.75 - 20.2520.25 - 25.6528.80 - 33.80
6070837592957695102121140
799010398116122105122127156178
38516070707076767683102
Fittings on this page have a minimum current rating, in line with the maximum Australian Standardconductor size or busbar size that the fitting can accept.
C
BA
www.dulmison.com.au
Substation Fittings
14-25
Sub
stat
ion
Fitt
ing
s
Material: Die cast aluminium body with tubularaluminium barrel section, argon arc welded toform Tee Connector. Suitable for AAC, AAACand ACSR conductors from 20mm dia. up to34mm dia. through the bolted run and from14mm up to 34mm for the tap connection. Othertypes available, see pages XX - XX and consultDulmison for further details.
Fittings on this page have a minimum current rating, in line with the maximum Australian Standardconductor size or busbar size that the fitting can accept.
Bolted Tee Connector Conductor to ConductorType BRCT - Bolted run, compression tee
BRCT1
BRCT2
BRCT3
BRCT4BRCT5BRCT6
54/7/3.2561/3.25
54/3.75 + 19/2.2561/3.75
54/3.75 + 19/2.2561/3.7530/7/3.5
54/3.75 + 19/2.2554/7/3.5
ACSRAAC, AAAC
ACSRAAC, AAAC
ACSRAAC, AAAC
ACSRACSRACSR
Run ConnectorTypeRange
Cat. No.
61/3.25
61/375
54/3.75 + 19/2.25
30/7/3.561/3.7554/7/3.5
Range
AAC, AAAC
AAC, AAAC
ACSR
ACSRAAC, AAAC
ACSR
TypeTap Connector
Substation Fittings
www.dulmison.com.au14-26
Sub
stat
ion
Fitt
ing
s
A clamp-type aluminium alloy terminal whichaccommodates a broad range of aluminium, copper andSCA conductors.
Type AN75 is normally supplied with blank palm. 1 or 2bolt drillings can be supplied to customers' specifications.
Type AN93-B22 through AN134-B22 has four 14mm holesdrilled at 50mm centres. Other drillings on request.
Heads of bolts are captured to permit single spanner installation. Suitable for use on copper oraluminium terminal pads when installed with Alminox. Standard hardware is stainless steel.
Aluminium Terminal Lug Conductor to PalmTypes AN & AN-B22
Fittings on this page have a minimum current rating, in line with the maximum Australian Standardconductor size or busbar size that the fitting can accept.
AN75AN93B22AN113B22AN134B22
35 - 185150 - 300300 - 500500 - 630
7.65 - 17.6415.75 - 22.6822.68 - 28.8028.80 - 33.80
149171179188
DimensionsL mmmm2
Conductor RangeO.D. mm
Cat. No.
44838383
W mm
85899695
P mm
---444
No. ofHoles
50mm
50mm
14mmDia.
W
L
T
www.dulmison.com.au
Substation Fittings
14-27
Sub
stat
ion
Fitt
ing
s
The type NT terminal lug is designed for use withimported switchgear having the NEMA standaradterminal drilling. Castings are of high copper contentalloy. Bolts, nuts and spring washers are stainless steel.
Terminal Lug Conductor to PalmType NT - Copper
NT1NT2NT3NT4NT5
16 - 7070 - 150150 - 240240 - 400400 - 630
5.10 - 10.7010.70 - 15.7515.75 - 20.2520.25 - 25.6525.65 - 33.80
3238445464
Dimensions mmConductor RangeO.D.Area mm2 A
Cat. No.
129129146152159
D
4956627683
E
M10M10M10M12M12
F
68101313
4046525965
G H
Fittings on this page have a minimum current rating, in line with the maximum Australian Standardconductor size or busbar size that the fitting can accept.
D
EA
G
14mm
44mm16mm
H
F
Substation Fittings
www.dulmison.com.au14-28
Sub
stat
ion
Fitt
ing
s
B C
B C
A
A
A
L
K Bolt size
K Bolt size
K Bolt size
Fig. 1
Fig. 2
Fig. 3
T
B
B
C
A high compression lug particularly suited to connection subject to vibration and strain. Thelongitudinal wave case of both lug and clamping bar assures high pullout strength. Supplied withstainless steel hardware.
Terminal Lug Conductor to PalmType TL - Copper; ATL - Aluminium
TL0TL0 2B1TL0 187
TL1TL2
TL2 150TL2 187TL2 200TL2 B1
TL3TL3 B22TL3 187TL3 2B1TL3 B4
TL3 B22CTL4
TL4 B22TL4 187TL4 B4TL4 B5
TL5TL5 B22TL5 187TL5 B4TL5 B5
TL6TL6 B22
TL7TL7 B22TL7 B4TL7 B5
16 - 3516 - 3516 - 3525 - 7035 - 9535 - 9535 - 9535 - 9535 - 95
70 - 15070 - 15070 - 15070 - 15070 - 15070 - 150
150 - 240150 - 240150 - 240150 - 240150 - 240240 - 400240 - 400240 - 400240 - 400240 - 400400 - 500400 - 500500 - 630500 - 630500 - 630500 - 630
5.10 - 7.655.10 - 7.655.10 - 7.65
6.75 - 10.707.65 - 12.607.65 - 12.607.65 - 12.607.65 - 12.607.65 - 12.60
10.70 - 15.7510.70 - 15.7510.70 - 15.7510.70 - 15.7510.70 - 15.7510.70 - 15.7515.75 - 20.2515.75 - 20.2515.75 - 20.2515.75 - 20.2515.75 - 20.2520.25 - 25.6520.25 - 25.6520.25 - 25.6520.25 - 25.6520.25 - 25.6525.65 - 28.8025.65 - 28.8028.80 - 32.7628.80 - 32.7628.80 - 32.7628.8 - 32.76
1122222212321332323323233232333
Dimensions mmConductor RangeO.D.Area mm2
Fig.No.
Cat. No.
2550253232323232443579355064
10238833864764183417676488348837676
A
13251313131613162216141625132516161613131616161913191619161913
B
------482929384850---385048---385038504838503850483850385038503850
C
M10M10M10M10M10M10M10M12M20M12M12M12M10M10M12M12M12M12M10M10M12M12M12M10M10M12M12M12M12M10M10
677689999
108
1097
1410101087
13101399
149
16111010
6792
113105117137137149108140160149127137181146165156140159156173165165165165176178187184184
K T L
Note: To order in aluminium, add prefix 'A' to catalogue number.Fittings on this page have a minimum current rating, in line with the maximum Australian Standardconductor size or busbar size that the fitting can accept.
www.dulmison.com.au
Substation Fittings
14-29
Sub
stat
ion
Fitt
ing
s
For use when terminating conductors at right angles toswitchgear terminal plates. Castings are in high coppercontent alloy. U-bolts, nuts and spring washers are stainlesssteel.
Right Angle Terminal Lug Conductor to PalmType TLC - Copper; ATLC - Aluminium
TL3C22TL4C22TL7C22
70 - 150150 - 240500 - 630
10.70 - 15.7515.75 - 20.2528.80 - 33.80
81011
DimensionT mm
Conductor RangeO.D.Area mm2
Cat. No.
Note: To order in aluminium, add prefix 'A' to catalogue number.Fittings on this page have a minimum current rating, in line with the maximum Australian Standardconductor size or busbar size that the fitting can accept.
T
4 x 14mm Dia holes
50mm
50mm
Substation Fittings
www.dulmison.com.au14-30
Sub
stat
ion
Fitt
ing
s
For the connection of vertical tubular busbar to switchgearterminal plates. Also used on equipment studs to provide aflat contact palm.Materials: Terminal lugs are cast in high copper contentalloy. Bolts, nuts and spring washers are stainless steel.
Terminal Lug Stud or Busbar to PalmType CS - Copper
CS5CS20
CS20BCS112CS28
CS28CCS30CCS38
CS40CCS42
CS42ACS181CS231CS250
19.125.425.428.630.230.231.834.938.139.739.746.058.763.5
16161916---252525252535252525
51513838---515151515170383838
Dimensions mmB
O.D. Tubemm A
Cat. No.
51513838---515151515170515151
C
8383837676102102102102102140102102102
D
130149149149146171171171171171210178203203
L
8383837676108108105105105143105108108
M
1013131010131313131313161919
T
M12M12M10M12M12M12M12M12M12M12M16M12M12M12
K
Fittings on this page have a minimum current rating, in line with the maximum Australian Standardconductor size or busbar size that the fitting can accept.
A B
K Bolt size
CD
T
M
L
O.D.
www.dulmison.com.au
Substation Fittings
14-31
Sub
stat
ion
Fitt
ing
s
Low cost connectors for clamping cable to switchgear terminal plates with four 14mm diameterholes at 50mm centres. Castings are of high copper content alloy. U-bolts, nuts and springwashers are stainless steel.
Palmless ConnectorTypes PC & PCS - Copper; APC & APCS - Aluminium
*PCS1*PCS2PC3PC4PC5PC7
25 - 12050 - 30070 - 150150 - 240240 - 400500 - 630
6.75 - 14.218.90 - 22.6810.70 - 16.0015.00 - 21.0020.00 - 25.6528.80 - 33.80
223350505050
Dimensions mmCable RangeO.D.Area mm2 C
Cat. No.
3238102102102102
L
7713131313
T
445076767676
W
------50505050
2 x 9.52 x 11.54 x 14.04 x 14.04 x 14.04 x 14.0
XNo. ofHoles
Note: PSC1 & PSC2 are single U-bolt connectors. To order in aluminium, add prefix 'A' tocatalogue number.Fittings on this page have a minimum current rating, in line with the maximum Australian Standardconductor size or busbar size that the fitting can accept.
L W
C
T
X
Substation Fittings
www.dulmison.com.au14-32
Sub
stat
ion
Fitt
ing
s
A 3-bolt 'A' shape connector for end-to-end or tee connecting flat copper busbar. Clamp halvesare high strength copper alloy. Bolts and nuts are stainless steel.
Flat Busbar ConnectorType BAC - Copper
BAC5151BAC7651BAC7676BAC10251BAC10276BAC1521
50.876.276.2101.6101.6152.4
50.850.876.250.876.2101.6
Width of Busbar mmTapRun
Cat. No.
M10M10M10M12M12M12
K
6262876590117
W
628787116116178
131313141414
Y ZDimensions mm
Fittings on this page have a minimum current rating, in line with the maximum Australian Standardconductor size or busbar size that the fitting can accept.
Y
W
6mm
Z Z
KDia.
www.dulmison.com.au
Substation Fittings
14-33
Sub
stat
ion
Fitt
ing
s
A heavy duty 4-bolt connector for cross-over, tee or end-to end jointing of flat copper busbar.Clamp halves are made of high strength copper alloy. Bolts and nuts are stainless steel.
Flat Busbar ConnectorType BC - Copper
BC2BC3BC4BC6
50.876.2101.6152.4
50.876.2101.6152.4
Width of Busbar mmTap ‘B’Run ‘A’
Cat. No.
M10M10M12M16
K
89114149213
W
11131625
19323232
Y ZDimensions mm
Note: Dimension 'Z' is standard spacing between connector halves. If greater spacing is required,please specify for determination of bolt length.Fittings on this page have a minimum current rating, in line with the maximum Australian Standardconductor size or busbar size that the fitting can accept.
Width ofbusbar
Width ofbusbar
W
AA
Y Y
Z
KDia.
Substation Fittings
www.dulmison.com.au14-34
Sub
stat
ion
Fitt
ing
s
Notes