sub: bulletin tender of this office -...

Office of the DY-CMM(ACL) BSL Bhusawal 425 201 MaharashtraTel/Fax:02582226010 email:[email protected]

MmaQya rola MmaQya rola MmaQya rola MmaQya rola Central Railway

18/06/15RunDate: Version:220414UserID PURCH

of 6

Sub: Bulletin Tender of this office

15-06-2015Bulletin No: 0007 Date:

This office on behalf of President of India invites Bulletin tender for supply of the items mentionedagainst each tender number below.

16-07-2015Bulletin Tender Opening Date: Bulletin Tender opening Time: 11:00 AM

Tender No. Quantity ConsigneePL NO FORS.No. Unit MRPItem (Y/N)

Remarks:

Remarks:

Remarks:

Remarks:

Remarks:

NIL

NIL

NIL

NIL

NIL

No voltage HRC diased fuse 6 Amps, 500 Volts AC/250 Volts DC. As per CLW Specn. No.CLW/ES/F-8 Alt-Eand Drg. No.CLW/ES/SK-1/F.8/C.

[Item to be procured from CLW approved sources only]

METAL HALIDE LAMP BALLAST FOR 250 WATT COPPER WOUND SILICON STEEL LAMINATION POLYESTER

FILLED, LOW LOSS, FILLED UP POLYESTER THERMO SETTING COMPOUND TERMINAL BLOCK FOR SUPPLYVOLTAGE AND IGNITER. BALLAST SHALL WORK ON SINGLE PHASE 230 VOLTS AC SUPPLY, IEC 922 AND923.

SPHERI BLOC for Axle guide Rod for WAP-5 locos as per RDSO Specification No.RDSO/2007/EL/SPEC/0051/REV.2 or latest and ABB Drg. No. IA 016-00003 REV.-1 Or latest.(ITEM RESERVED FOR RDSO APPROVED SOURCES ONLY)

LED BASED PIT LIGHTS IN DIE COST ALUMINIUM HOUSING & ENGINEERING GRADE POLYMER DIFFUSER(IP 66)AS PER SPECN (A) LED MATRIX --(i) OPERATING VOLTAGE (WITHOUT CONVERTOR ):24 V DC (ii)WATTAGE :12 W (B) LED CHARACTERISTICS --(i)LENS TYPE :WATER CLEAR (ii) LUMINIOUS INTENSITY:MORE THAN 50 LUMEN (iii)VEIWING ANGLE : MORE THAN 100 DEGREE (iv) COLOR FREQUENCY: 6000 K ORMORE (V)DRIVER FEATURES --(a) OVER VOLTAGE,OVER CURRENT,SURGE PROTECTION,THERMAL CUTOFF,OUTPUT SHORT CIRCUIT,REVERSE POLARITY,HIGH VOLTAGE WITHSTANDING CAPACITY,HIGH SURGEWITHSTANDING. (b)VOLTAGE MODE OPERATING VOLTAGE : 3 TO 3.2 VOLTS.(vi) MAX FORWARD CURRENT

FOR EACH LED:350 Ma (C) HOUSING DIMENSION: LENGTH :200 MM ,WIDTH:130 MM ,HEIGHT:75 MM

HEAVY DUTY HIGH TENACITY 100% POLYSTER QUADRUPLIEX WEBBING SLING, CAPACITY 02 TON(SAFEWORKING LOAD ) LENGTH 3.5 METERS, WIDTH 25MM , MAKE SAMSON , SLINGSETOR GREENFIELD WITH

TEST REPORT CERTIFICATE FROM GOVT. APPROVED COMPETENT AUTHORITY.

Description:

Description:

Description:

Description:

Description:

1050.000

30.000

16.000

48.000

18.000

DyCMM(AC Loco)BSL

DyCMM(AC Loco)BSL

DyCMM(AC Loco)BSL

DEE [TRS] BSL

DEE [TRS] BSL

56151155

56151158

56151162

56155024

56155040

42083709

42110178

29010019

42

72

1

2

3

4

5

Nos./01

Nos./01

Nos./01

Nos./01

Nos./01

Dy CMM(AC Loco)Bhusaval





N

N

N

N

N




of 6




Remarks:

Remarks:

Remarks:

Remarks:

Remarks:

Remarks:

NIL

NIL

NIL

NIL

NIL

NIL

INSULATING COATING CLASS "H"ANTI TRACK,AIR DRY FOR ELECTRICAL WINDING,RED PIGMENTEDPROTECTIVE COATING IN AEROSAL CAN (CAPACITY LESS THAN 1000 ML )OF M/s AEROLUBE ,ASV OR

ZEUTH/CORIUM MAKE SPEC AS PER ANNEXURE ATTACHED.:SPECIFIC GRAVITY (H 20= 1)---0.8, STABILITY---- STABLE,DRYING SCHEDULE----(AT 77 F(25 DEG C)50% HUMIDITY AT1 mil,DRY), TO TOUCH---15 Min,TO HANDLE---1 HR,TEMPERATURE RESISTANCE---CLASS H,MINERALS SPRITS RESISTANCE--- VERYGOOD,DIELCTRIC STRENGTH--2.100 VOLTS/MIL,RESIN SYSTEM--- EPOXY ESTER

SET OF RUBBER 'O' RING FOR FLOWELL MAKE MPH(OIL PUMP)MODEL-1143.L (ONE SET CONSISTS OF 04ITEMS ,05 NOS) AS PER DETAILS (1) 'O'RING ID=200,OD=210 THICK 05 MM QTY-01 NOS(2)'O'RINGID=88.5,OD=94.5 THICK 03 MM QTY-02 NOS(3)'O'RING ID=76,OD=86 THICK 05 MM QTY-01NOS(4)'O'RING ID=38,OD=44 THICK 03 MM QTY-01 NOS.TOTAL-05 NOS

SET OF IRS THICK WHEEL FLANGE PROFILE TEMPLATES.(SET CONSISTING OF RH PART,LH PART & FEMALEPART.TOTAL03 PARTS) .TEMPLATES SHOULD BE CALIBRATED BY NABL ACCREDIATED LABORATORY ANDCERTIFICATE TO BE SUBMITTED WITH TEMPLATES.AS PER RDSO DRG.NO.CSL-3040 ALT-2,&ELS/BSLDRG.NO.BSL/TRS/WAP4/SK/4/01

SET OF WEAR ADOPTED WHEEL PROFILE TEMPLATES.(ONE SET CONSISTING OF LH PART,RH PART &FEMALE PART.TOTAL03 ITEMS) .TEMPLATES SHOULD BE CALIBRATED BY NABL ACCREDIATEDLABORATORY AND CERTIFICATE TO BE SUBMITTED WITH TEMPLATES.RDSO DRG.NO.2561 ALT-8,&ELS/BSL DRG.NO.BSL/TRS/SK/4/520

POLYMIDE SELF LUBRICATING SLEEVE FOR BOLSTER FRICTION DEVICE ARM , RDSOSPECN.NO.2007/RDSO/SPECN/0056 (REV.0)JAN 2008.DRG.NO.BSL/TRS/SK/4/703

DIFFERENT TYPES OF GRINDERS,MAKE -RALLIWOLF,KPT,BOSCH BLACK AND DECKER INDIA LTD,DEWALTOR SIMILAR AS PER DETAILS (ONE SET CONSIST OF 3 ITEMS 12 NOS ) CERTIFICATE OF OEM ORAUTHORISED DEALER TO BE SUBMITTED (1) STRAIGHT HEAVY DUTY GRINDER AS BELOW:- (1)OPERATING VOLTAGE = 1-PHASE,50 HZ,230V AC (2)CAPACITY = 100 X 20 X 12.7 MM(3)INPUT (WATTS

)=1100 (4)NO LOAD SPEED = 5600 RPM (5) APPROX WEIGHT =6 KG,QTY-04 NOS (2)ANGLE GRINDER ASBELOW:- (1) OPERATING VOLTAGE = 1-PHASE,50 HZ,230V AC (2)CAPACITY = 125 X 22 X 6 MM(3)INPUT(WATTS )=1200 (4)NO LOAD SPEED = 9500 RPM (5) APPROX WEIGHT =3.5 KG ,QTY-04 NOS(3)STRAIGHTHEAVY DUTY GRINDER AS BELOW:- (1) OPERATING VOLTAGE = 1-PHASE,50 HZ,230V AC (2)CAPACITY =150 X 25 X 15.9 MM(3)INPUT (WATTS )=1200 (4)NO LOAD SPEED = 5600 RPM (5) APPROX WEIGHT =10.8KG -QTY-04 NOS --TOTAL-12 NOS

Description:

Description:

Description:

Description:

Description:

Description:

18.700

66.000

2.000

2.000

600.000

1.000

DEE [TRS] BSL

DEE [TRS] BSL

DEE [TRS] BSL

DEE [TRS] BSL

DEE [TRS] BSL

DEE [TRS] BSL

56155041

56155042

56155043

56155044

56155046

56155054

81

25

72

72

25

72

6

7

8

9

10

11

Ltr/51

Set/03

Set/03

Set/03

Nos./01

Set/03







N

N

N

N

N

N




of 6




Remarks:

Remarks:

Remarks:

Remarks:

Remarks:

Remarks:

Remarks:

NIL

TENDER SPECIFIC AUTHORISATION FIRM OEM i.e.SCHNEIDER ELECTRIC INFRASTRUCTURE LIMITED MAYBE SUBMITTED ALONGWITH OFFER...

(TENDER SPECIFIC AUTHORISATION MAY BE SUBMITTED FIRM OEM i.e. M/S.LARSON & TUBRO ALONGWITH OFFER .)

(TENDER SPECIFIC AUTHORISATION CERTIFICATE FIRM OEM i.e. M/S.SKF INDIA LTD TO SUBMITTEDALONG WITH OFFER.)

(TENDER SPECIFIC AUTHORISATION MAY BE SUBMITTED FIRM OEM i.e. M/S.SCHNEIDER ELECTRICINFRASTRCTURE LIMITED SA FRANCE ALONG WITH OFFER .)

NIL

NIL

WEAR PLATE(N66 LINER FOR WAP4 LOCOS ) ONE SET CONSIST OF 02 ITEMS 48 NOSELW/BSL DRG.NO.ELW/BSL/4/F64.042

SUPPLY COMMISSIONING AND TESTING OF APC MAKE RBC-2 BATTERY 12 V,7 AH

SET OF SPARE CONTACT KIT FOR L&T MAKE DIFFERENT TYPES OF 3-POLE POWER CONTACTORS.ONE SETCONSIST OF 09 ITEMS AND 75 NOS AS PER DETAILS 1) SET OF MAIN CONTACT KIT FOR ML2 CONTACTOR

,CAT.NO,SS95307 QTY-15 NOS (2) SET OF MAIN CONTACT KIT FOR ML3 CONTACTOR ,CAT.NO,SS95309QTY- 10NOS (3) SET OF MAIN CONTACT KIT FOR MNX9 CONTACTOR ,CAT.NO,CS94123, QTY-06 NOS (4)SET OF MAIN CONTACT KIT FOR MNX 12 CONTACTOR ,CAT.NO,CS94124, QTY-06 NOS (5) SET OF MAINCONTACT KIT FOR MNX 18 CONTACTOR ,CAT.NO,CS94125, QTY-06 NOS (6) SET OF MAIN CONTACT KITFOR MNX 25 CONTACTOR ,CAT.NO,CS94127, QTY-06 NOS (7) SET OF MAIN CONTACT KIT FOR MNX 32CONTACTOR ,CAT.NO,CS94128, QTY-10 NOS(8) SET OF MAIN CONTACT KIT FOR MNX 40 CONTACTOR,CAT.NO,CS94147, QTY-06 NOS (9) SET OF MAIN CONTACT KIT FOR MNX 70 CONTACTOR

,CAT.NO,CS94151, QTY-10 NOS-TOTAL-75 NOS .

HIGH PRESSURE PIPE PART NO.227957A, LENGTH 2 MTR (78 INCH) OUTER DIAMETER 4.00 MM FOR SKFTMJE.300 OIL INJECTOR PUMP, MAX PRESSURE 43500 PSI SKF MAKE ONLY.

SET OF CONTACT TIPS FOR 3 POLE 150 AMP CONTACTOR TYPE LC1IF-150 AFD SCHNEIDER ELECTRICMAKE REF NO.LA5FF431A (PER POLE TWO FIXED CONTACT AND ONE MOVING CONTACT ,2 DEFELECTOR,1BACK PLATE,FIXING SCREW AND WASHER )

T-MAX TURNING AND FACING COATED INSERT CNMG 190612 MAKE WIDIA,/SANDWIK OR EQUIVALENT OFGR IN 2000 FOR LATHE MACHINE,IN TEMPER PROOF(SEALED BLISTER PACKING)

HEX HEAD SCREW HIGH TENSILE SIZE 20 X 55 ZINC PLATED P.CL.8.8 IS:1364 (MATERIAL IS RESERVEDFOR CLW APPROVED SOURCES)

Description:

Description:

Description:

Description:

Description:

Description:

Description:

12.000

7.000

1.000

3.000

20.000

250.000

2832.000

DEE [TRS] BSL

JR.SHOP SUPDTT. [MCO]

BSL

SSE [PROGRESS] ELW

BHUSAWAL.

CWM/ELW/BSL

SSE(PROGRESS) ELW

BHUSAWAL.

MACHINE SHOP

ELECT.LOCO W/SHOPBSL

TRACTION MOTOR

OVERHAULS BSL

56155055

56157022

56157054

56157073

56157106

56157120

56157138

25

25

25

25

25

25

25

12

13

14

15

16

17

18

Set/03

Nos./01

Set/03

Nos./01

Set/03

Nos./01

Nos./01








N

N

N

N

N

N

N




of 6




Remarks:

Remarks:

Remarks:

Remarks:

Remarks:

Remarks:

Remarks:

Remarks:

NIL

NIL

NIL

NIL

NIL

NIL

NIL

NIL

YARN BRAIDED PVC PIPE 25 MM ID,32 MM OD FOR SANDER CIRCUIT OF WAP-5 LOCO AS PER CLWDRG.NO.1209-16.417-006 ALT-2

GASKET FOR WRE,GG AND BL MODULE OF BUR PANELS OF 3-PHASE LOCO.AS PERDRG.NO.ELW/BSL/4/WAG-9/38.0010 (MATERIAL TO BE PROCURED FROM CLW APPROVED SOURCE )

MALE ELBOW 6MM OD X 1/4" BSPT (BRASS ) AS PER CLW'S SPEC NO.CLW-MS-3-066 ALT-12

SET OF TYRE SIZE 195 R 15 WITH TUBE STEEL RADIAL MAKE- CEAT,APPOLO ,MRF

HEAT SHRINKABLE STRAIGHT THROUGH JOINT KIT SUITABLE FOR 1100V GRADE LT PVC/XLPE CABLE SIZE25-50 SQ MM CORE 3.5 AS PER RAYCHEM KIT NO.EPKJ0130 MAKE RAYCHEM OR 3M-M SEAL OR CABSEAL

HEAT SHRINKABLE STRAIGHT THROUGH JOINT KIT SUITABLE FOR 1100V GRADE LT PVC/XLPE CABLE SIZE70-150 SQ MM CORE 3.5 AS PER RAYCHEM KIT NO.EPKJ0137 MAKE RAYCHEM OR 3M-M SEAL OR CABSEAL

MALE CONNECTOR (BRASS ) 1 1/2" TUBE X 1 1 /2" ISO TAPPER AS PER CLW SPEC NO CLW-MS-3-066 ALT-12

HEAT SHRINKABLE STRAIGHT THROUGH JOINT KIT SUITABLE FOR 1100V GRADE.LT PVC/XLPE CABLE SIZE185-300 SQ MM CORE 3.5 AS PER RAYCHEM KIT NO.EPKJ0144 MAK RAYCHEM OR 3-MM SEAL OR CABSEAL.

Description:

Description:

Description:

Description:

Description:

Description:

Description:

Description:

30.000

233.000

48.000

2.000

20.000

12.000

18.000

8.000

CWM/ELW/BSL

CWM(ELW) BSL

CWM/ELW/BSL

SSE [PROGRESS] ELW

BHUSAWAL.

SSE [PROGRESS] ELW

BHUSAWAL.

SSE [PROGRESS] ELW

BHUSAWAL.

CWM/ELW/BSL

SSE [PROGRESS] ELW

BHUSAWAL.

56157163

56157165

56157167

56157220

56157224

56157227

56157231

56157236

25

25

25

25

25

25

25

25

19

20

21

22

23

24

25

26

Mtr/22

Mtr/22

Nos./01

Set/03

Nos./01

Nos./01

Nos./01

Nos./01









N

N

N

N

N

N

N

N




of 6


1. The tenderers are advised to indicate clearly in their offer basic rate, taxes & duties applicable, FOR terms, delivery period, make/brand of the offered item (if any), quantity offer, specifying the unit of the item, Country of Origin of the item (if applicable), freight charges (if any) etc. 2. The quoted amount of VAT and P&F (if any) even when included in the quoted rate, the tenderer must spell out these separately in the offer (Breakup of VAT, packaging & forwarding charges should be given clearly).

3. Tender Number, Tender opening date and address of the office where tender is to be dropped should be clearly indicated on the "Top of the sealed envelope". 4. The tenderers may dispatch their offer by POST in time to reach 'this Office' or may also be delivered per bearer and should be dropped in the Tender Box placed in the office and not in the office of the Controller of Stores or any other offices of the Division.

5. The delivery of the item should be ex-stock as earlier as possible.


"Terms and Conditions" of subject Bulletin Tenders

6. No Octroi charges will be paid to supplier, however, the OEC will be issued along with the P.O. if specifically asked by tenderer in their offer.

7. The offer should be strictly as per "specification" and "drawing number" mentioned in the tender document(if any). The brand name (if any) of the item to which offer is made, should be, indicated clearly in the offer.

8. Tenderer must quote MRP for the branded item in their offer (if applicable).

9. The offer with "Advance payment terms" will not be accepted. No advance payment are being made by this office.

10. The Drawing/ sample of the item may be seen in this office (if applicable).

11. Ambiguous offer will be summarily rejected. Terms of offer must be specific and unambiguous.

12. In case of delay in contractual delivery period, necessary penalty will be levied.

13. In case of multiple items tender like bulletin where many items are included in the tender enquiry, the tenderers are advised to quote separate offer for each item in separate envelope.

14. This office reserves the right to accept/ or reject the offer without assigning any reason in case of non-compliance of terms and conditions of the tender schedule by tenderers.

15. The offer should be valid for a minimum period of 30 days, offer with less validity is liable to be rejected.

16. Offers received through FAX and found in tender box at the time of opening of tender and complete in all respects shall be treated as valid offer subject to firm submitting post confirmation copy duly signed by authorized person within 10 working days from the date of opening. No purchase order will be issued against the fax offers without receipt of confirmation copy.

17. In case tenderers submit fair offer on behalf of OEM, then, OEM authority letter must be enclosed




of 6


DY-CMM(ACL) BSL


"Terms and Conditions" of subject Bulletin Tenders

()

Mob No:

along with the offer.

18. Tenders valuing 'above Rs One lakh' will be governed by IRS terms and conditions of contract, latest edition and General conditions of contract for Stores department of this railway and Addendum to the same subject applicable to this contract to the mentioned consignee.

sub: bulletin tender of this office -...

Documents