student project
TRANSCRIPT
UAVS Summer School Matera July 27-‐31 2015
ApulAlba Team: Antonio Novelli -‐-‐ Teo Berloco –
Cipriano Loiudice -‐-‐ Lydra Qeraxhiu
The Aim of the Course
• Learning how to set up an UAS and planning the pre-‐flight;
• Learning how to use specific programms (Mission Planner; AgisoA Photoscan; Xeneth)
• Post-‐processing of images acquired in Experimental Sites;
Our Project Mission Planner
Experimental Site
1st Step: -‐ Draw the polygon; -‐ Set the WPs; -‐ Set the overlapping
raIo;
Our Project
Take off
Our Project
Landing
Our Project AgisoA Photoscan
2nd Step:
-‐ Import of the pictores acquired
by the drone cameras;
-‐ Align of the ictures; -‐ Dense Cloud, Mesh
and Texture steps;
Our Project
2nd Step:
-‐ Import of the pictores captured
by the drone cameras;
-‐ Align of the ictures; -‐ Dense Cloud, Mesh
and Texture steps;
Ortophoto
Our Project
DEM
2nd Step:
-‐ Import of the pictores captured
by the drone cameras;
-‐ Align of the ictures; -‐ Dense Cloud, Mesh
and Texture steps;
Our Project ArcGIS
3rd Step: -‐ Ortophoto used
o n f o l l o w i n g classificaIons
Our Project U n s u p e r v i s e d classificaIon: 2 output classes
Our Project U n s u p e r v i s e d classificaIon: 5 output classes
Our Project U n s u p e r v i s e d classificaIon: 11 output classes
Our Project
Our Project
Conclusion What have we learned?
• How to plan a flight; • How to assemble a UAS • How to use the basic tools of the soAware; • How to integrate outputs from different soAware;
The Future prespec4ve
Conclusion
Conclusion The Future prespec4ve
The Future prespec4ve
Conclusion
Our Project
Thanks for your a9en4on