PLEASE! DO NOT RETURN THIS PRODUCT TO ANY RETAIL STORE!For any questions or problems with this product please contact us at:

Email: info@interactivetoy.comPhone: Inside North America: +1-416-444-6873 Outside North America: 1-866-214-2220

Address: Interactive Toy Concepts, 17 Vulcan Street, Toronto, Ontario, Canada. M9V 1L3

IMPORTANT SAFETY INFORMATION

SHOOTING GALLERY is a trademark of Interactive Toy Concepts © 2011 All Rights Reserved. Manufactured by and distributed by Interactive Toy Concepts (HK) Ltd.

Conforms to Safety Standards ASTM F963-03 Regulatory Requirements.Products and colors may vary. MADE IN CHINA.

INS-44071-110305-US

8+Item# 44071Congratulations on your

purchase of the HUNTER SERIESSHOOTING GALLERY fromINTERACTIVE TOY CONCEPTS

IMPORTANT BATTERY INFORMATION: Do not mix old and new batteries, different types of batteries, standard carbon zinc, alkaline or rechargeable of different capacities. Rechargeable batteries are only to be charged under adult supervision. Please respect the correct polarity (-) or (+). Do not try to recharge non-rechargeable batteries. Do not throw batteries into the fire. Replace all batteries of the same type/brand at the same time. The supply terminals are not to be short-circuited. Remove exhausted batteries from the toy. Batteries should be replaced by adults. Remove batteries if the toy is not going to be played with for some time. Removable batteries are to be removed from the toy before they are charged. The packaging should be kept since it contains important information.

Limited 30-day warrantyProduct is warranted by Interactive Toy Concepts Limited against manufacturing defects in material and workmanship under normal use for (30) days from the date of purchase. Warranty is validated upon receipt of proof or purchaseand confirmation of UPC code.

Proof of Purchase

Now you can hone your marksmanship skills with the revolutionary new HUNTER SERIES: SHOOTING GALLERY toy from Interactive Toy Concepts. The SHOOTING GALLERY uses an IR Blaster with a narrow infrared beam to take out six different, random targets on 3 swiveling Target Pods.It’s a race against time as each Target Pod randomly presents either the correct target or the wrong

target. Every time you hit the correct target, you gain a point. When you hit the wrong target, you lose a point. Your objective is to hit as many of the correct targets as you can before the game time runs out!Three different levels of speed and randomization allow you to put your aim and reflexes to the test.

The SHOOTING GALLERY is the perfect toy for the beginner and expert marksman. SHOOTING GALLERY can easily be played with one person or more. Single play consists of one player trying to improve their own Target Score. Multiple player mode allows for competition to see who gets the best score. Each player will have a turn at shooting the targets until their game time runs out. The winner gets bragging rights for ultimate reflexes and marksmanship!

INSTRUCTION MANUAL

Do not modify your SHOOTING GALLERY toy. Do not use outdoors! Do not use around heavy debris! Do not use around smoke or flames! Do not use around water! Do not use around electricity or electrical wires! Do not use in crowded areas! Do not use around air conditioning! Do not use around air vents! Do not use around ceiling fans! Do not use around large obstacles! Do not use in very small spaces! Do be conscious of changes in your area! Any changes or modifications to this product are strictly prohibited and will void product warranty. Always turn off your Main Target Pod and IR Blaster when not in use. Always remove batteries from IR Blaster and Main Target Pod during storage. Always use NEW alkaline batteries for optimal performance. Keep your instruction manual in a safe place for future use. Only use the provided IR Blaster included with the SHOOTING GALLERY toy.

TM

FCC NOTE: U.S. ONLY

Quick Start!! Start taking out targets in the SHOOTING GALLERY fast!1. Once the batteries are properly inserted into the Main Target Pod, carefully insert the

Cardboard Targets into the correct Target Slots on all 3 Target Pods. (Refer to the subsection “INSERTING THE TARGETS INTO THE PROPER TARGET POD SLOTS” under the section “PREPARING THE TARGET PODS”.)2. Connect the 2 Side Target Pods to the Main Target Pod so that Target B matches up with

socket B, and Target C matches up with Socket C. If you don’t match the Targets to the Proper Sockets, they will make the wrong sound when hit. (refer to the subsection “CONNECTING THE SIDE TARGET PODS TO THE MAIN TARGET POD” under the section “PREPARING THE TARGET PODS”.)

3. Press the Power Button on the Main Target Pod to turn on the system. There is no charging necessary! Select one of the 3 modes of play by pressing the Mode Button. Level 1 is the easiest, and level 3 is the most difficult.

4. Once the batteries are properly installed, turn on the IR Blaster! The switch is located on the bottom of the IR Blaster just ahead of the trigger.

5. Reload the IR Blaster by sliding the Reload Pump backwards and forwards. (You will need to reload after each shot fired.) Shoot the Main Target Pod to start the game!

6. As the targets swivel, shoot the correct targets (bear, mountain lion, or wolf) to score points! Do not shoot the wrong targets (your fellow hunter!) or you will lose points. Each game duration is 1 minute. Your objective is to score as many points as possible within that time. -Good luck!

PLAYING WITH YOUR SHOOTING GALLERY: -Continued-Mode 1 is the easiest. There is a good deal of time between available targets and no targets present themselves simultaneously.

-Mode 2 has the medium difficulty level. The targets become available for shooting very quickly. Sometimes 2 targets present themselves at once.

-Mode 3 is the hardest level. Targets become available very fast and sometimes all 3 targets present themselves at once.

3. Once the batteries are properly installed, turn on the IR Blaster! The switch is located on the bottom of the IR Blaster just ahead of the trigger.4. Reload the IR Blaster by sliding the Reload Pump backwards and forwards. (You will need to reload after each shot fired.) Shoot the Main Target Pod to start the game!5. The Targets begin to Swivel on the Target Pods. Every time a Target swivels, a Red LED lights up under that Target. Start shooting the Targets by reloading your IR Blaster and pressing the Trigger.6. When the Bear, Mountain Lion, or Wolf targets appear, these are the Correct Targets. You will need to shoot them to score 1 point for each Correct Target you hit. Depending on which Correct Target you hit, you will hear either a Bear’s Growl, a Mountain Lion’s Roar, or a Wolf’s Howl!7. When a Target swivels and a Hunter appears, do not shoot the Hunter as this is the wrong target! The Hunter is also your friend! You will lose a point for each Wrong Target you hit and the Hunter will yell his comments on your reckless marksmanship!8. Regardless of selected Mode, each game duration is 1 minute. Score as many points as possible within this amount of time. Good luck!9. Once the one-minute Shooting time runs out, the Targets will stop Swiveling and your final score will blink on and off.10. To play again, it is necessary to turn off and then turn back on the Main Target Pod. Just press the Power Button twice. You will need to re-select your preferred Mode. Then follow steps 4 through 9 above. Practice makes perfect!

STORING YOUR SHOOTING GALLERY:

TROUBLESHOOTING:

Shooting Gallery will not operate although it is turned on.

ISSUE CAUSE CORRECTIVE ACTION1. A game has just been finished.2. The IR Blaster is not turned on.

1. Press the Power Button twice to turn off and on the Target Pods. This will reset the system.2. Ensure the IR Blaster has the batteries properly installed and is turned on and is reloaded. Shoot the Main Target Pod to start the game.

The wrong sound is heard from the Main Target Pod in relation to which Target is hit.

1. The Cardboard Target is mounted incorrectly in the Swiveling Target Slot.2. The wrong Targets are mounted in the wrong Target Pod.

The Cardboard Targets will not fit properly into the Swiveling Target Slots.

1. The Cardboard Target is mounted incorrectly in the Swiveling Target Slot.2. The Cardboard Targets are fragile and have been damaged.

1. Ensure the Cardboard Target is mounted correctly in the Swiveling Target Slot. Please refer to the subsection “INSERTING THE TARGETS INTO THE PROPER TARGET POD SLOTS” under the section “PREPARING THE TARGET PODS”.2. Ensure the correct Cardboard Target is mounted on the correct Target Pod. Please refer to the subsection “CONNECTING THE SIDE TARGET PODS TO THE MAIN TARGET POD” under the section “PREPARING THETARGET PODS”.

1. Ensure the Cardboard Target is mounted correctly in the Swiveling Target Slot. Please refer to the subsection “INSERTING THE TARGETS INTO THE PROPER TARGET POD SLOTS” under the section “PREPARING THE TARGET PODS”.2. The Cardboard Targets can easily be replaced with home-made Cardboard Targets. Adult supervision is required when cutting cardboard with any sharp instruments such as a knife or a pair of scissors!! Alternatively, the original Cardboard Targets can be mended with tape.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:1) This device may not cause harmful interference.2) This device must accept any interference received including interference that may cause undesired operation.Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These Limits are designed to provide reasonable protection against harmful interference in a residential installation. This generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna - Increase the separation between the equipment and receiver - Connect the equipment to an outlet on a circuit different from that to which the receiver is connected - Consult the dealer or an experienced radio/TV technician for help.

If you are finished playing, turn off the SHOOTING GALLERY by pressing the Power Button on the Main Target Pod. If you forget to turn off the power, it will automatically turn off in about 4 minutes. Also, make sure to turn off your IR Blaster by sliding the on / off switch to the off position. If you will be storing your SHOOTING GALLERY toy for a longer period of time, remove the batteries from the Main Target Pod and the IR Blaster. This will prolong the operational life of the toy and the batteries. It is also a good idea to remove the Cardboard Targets from the Swiveling Target Slots on the Target Pods. It is also suggested to disconnect the Side Target Pods from the Main Target Pod. Do not yank the Side Target Pods’ Wire Connectors from the Main Target Pod. This will damage the Connectors. Simply press the small Tab on the Connector and pull it out of the Socket as you would disconnect a Telephone Wire. It is a good idea to store the 2 Side Target Pods, Main Target Pod, IR Blaster, Cardboard Targets, and Instruction Manual together so no components become misplaced. Please note, the Cardboard Targets are especially fragile. Please store them with care. Do not place any objects on top of any SHOOTING GALLERY components during storage. This Instruction Manual should be retained for future reference.

The SHOOTING GALLERY has been carefully packaged to avoid damage during shipping. PLEASE USE CAUTION WHEN UNPACKING.

UNPACKING YOUR SHOOTING GALLERY:To prevent damage during shipping the SHOOTING GALLERY is securely located in the package. Please ensure that all of the plastic bags found in the box have been safely disposed of and are out of the reach of children. Plastic bags present a choking hazard to small children. Be very careful when removing the SHOOTING GALLERY to prevent damaging any of the components.

COMPLETE PACKAGE CONTENTS AND COMPONENT BREAKDOWN:IR Blaster (comes in 2 easy to assemble parts)

Main Target Pod

Side Target Pod B Side Target Pod C

Swiveling TargetSlot A

Cardboard Targets

Battery Compartment Door(underside)

Power Button

Mode Button

3 Green Mode LEDs

Red Action LED

Speaker

Infrared Receiver

Score Display

2 Sockets for SideTaget Pods B and C (back)

Infrared ReceiversRed Action LEDs

Butt Stock Push Tab Main Housing

ON/OFF SwitchTrigger

Battery Compartment DoorMain Housing

Safe InfraredBeam Emitter

Reload Pump

INSTALLING BATTERIES:The IR Blaster uses 3 “AAA” batteries. The Main Target Pod uses 4 “AA” batteries. The 2 Side Target Pods do not require any batteries as they are connected to the Main Target Pod. (All batteries are sold separately.) No charging is required of any components in the SHOOTING GALLERY. Once the batteries are inserted, the toy is ready to play.

INSTALLING BATTERIES -ContinuedSHOOTING GALLERY IR Blaster Battery Installation

1. Open the battery compartment door located at the upper left side of the IR Blaster by using a Philips screwdriver (not included).2. Insert the 3 AAA batteries according to the picture (shown). Ensure that the + and – polarities match the illustrations inside the battery compartment.3. Replace the battery compartment door and tighten the screw using the screwdriver. Do not over tighten.

SHOOTING GALLERY Main Target Pod battery Installation:

1. Ensure that the Main Target Pod is turned off.2. Open the battery compartment door located at the bottom of the Main Target Pod by using a Philips screwdriver (not included).3. Insert the 4 AA batteries according to the picture (shown). Ensure that the + and – polarities match the illustrations inside the battery compartment.4. Replace the battery compartment door and tighten the screw using the screwdriver. Do not over tighten.

ASSEMBLING THE IR BLASTER:The IR Blaster requires minimum assembly. By mounting the Butt Stock onto the IR Blaster, the ergonomics of the toy will be greatly improved. Removing the Butt Stock from the IR Blaster may improve its storage when not in use. Follow these simple steps to assemble the IR Blaster.

1. Locate the Main Housing of the IR Blaster as well as the Butt Stock in the package.

2. Slide the Butt Stock onto the Main Housing of the IR Blaster until it clicks into position. The Butt Stock will only fit one way.

Note: To remove the Butt Stock from the IR Blaster for storage purposes, simply press the two tabs on either side of the Butt Stock that have the text “PUSH” molded into them and slide the Butt Stock off.

PREPARING THE TARGET PODS:INSERTING THE TARGETS INTO THE PROPER TARGET POD SLOTS:

There are 3 Cardboard Targets included with the SHOOTING GALLERY. Each Target has to be mounted correctly on the proper Target Pod for the SHOOTING GALLERY game to work properly. Target A fits with the Main Target Pod. Targets B and C fit with the 2 Side Target Pods. Please note, the 2 Side Target Pods are identical, so Target B or C can be mounted on either Side Target Pod. However, once Targets B and C are mounted into the Side Target Pods, the Side Target Pods will need to be connected to the Socket with the corresponding letter (B or C) on the Main Target Pod. Follow the next steps to mount the Cardboard Targets onto their respective Swiveling Target Slots.

1. Select the matching Target Pod and Cardboard Target.2. Note the small cut-out notch located on the bottom of the Cardboard Target. Locate the corresponding raised notch on the Swiveling Target Slot on the Target Pod.3. Line up the notches on the Cardboard Target and the Swiveling Target Slot.4. Gently Insert the Cardboard Target into the Swiveling Target Slot as shown.5. Follow steps 1 through 4 for the remaining 2 Targets.

NOTE: IF THE NOTCHES ON THE CARDBOARD TARGET AND THE SWIVELING TARGET SLOT DO NOT MATCH UP PROPERLY, THE TARGETS WILL BE MOUNTED INCORRECTLY AND THE SHOOTING GALLERY GAME WILL NOT WORK PROPERLY!

CONNECTING THE SIDE TARGET PODS TO THE MAIN TARGET POD:Once all 3 Targets are in their proper Swiveling Target Slots you will need to connect the Side Target Pods to the Main Target Pod. Connecting the Target Pods is very easy as they use standard “telephone jacks” to connect to each other. Follow these easy steps to connect all 3 Target Pods.

1. Locate the 2 Sockets at the back of the Main Target Pod. The 2 Sockets are labeled B and C.

2. Locate the Side Target Pod B (with Target B mounted onto it). Insert the Side Target’s Wire Connector into Socket B at the back of the Main Target Pod.

3. Locate the Side Target Pod C (with Target C mounted onto it). Insert the Side Target’s Wire Connector into Socket C at the back of the Main Target Pod.

NOTE: IT IS CRITICAL TO CONNECT THE CORRECT TARGET ONTO THE CORRECT TARGET POD. BOTH SIDE TARGET PODS ARE IDENTICAL WITH THE ONLY DIFFERENCE BEING THE TARGETS THEMSELVES. THE FOLLOWING COMBINATIONS WILL WORK ONLY:

Main Target Pod – Cardboard Target A (Bear / Hunter)

Side Target Pod B – Cardboard Target B (Mountain Lion / Hunter)

Side Target Pod C – Cardboard Target C (Wolf / Hunter)

CHOOSING YOUR PLAYING LOCATION: The HUNTER SERIES: SHOOTING GALLERY is intended for indoor use only. The Infrared Beam used by the IR Blaster is completely safe. In order to work properly the Target Pods must face the user directly. Under normal operation, the targets will be perpendicular to the user until they swivel. For the most challenging game play, the Target Pods should be placed as far apart as possible. Each Side Target Pod has a 5.5’ (1.7 M) Connector Wire. When all 3 Targets are connected together, they will have a total span of about 11’ (3.5 M). The 3 Target Pods can be placed at different elevations to create a more challenging game play. If the Target Pods are too close together (nearly adjacent) their Infrared Sensors may become confused and the wrong targets may be hit. The SHOOTING GALLERY will operate best in a room which does not have very bright light or many reflective surfaces. A common house room should be the ideal operating environment for the SHOOTING GALLERY.

PLAYING WITH YOUR SHOOTING GALLERY:

You can start playing SHOOTING GALLERY as soon as the Target Pods are assembled and the batteries are inserted. There is no charging necessary! The objective of the SHOOTING GALLERY game is to score the most points by shooting the most correct targets, and least wrong targets within a one minute time frame.

The SHOOTING GALLERY can be played as a 1 player or 2 player (or more) game. In 1 player mode, the player tries to shoot as many correct targets as possible while avoiding shooting the wrong targets. The goal is to improve the final score. In 2 or more player mode, all players take turns in attempting to shoot as many correct targets as possible, without hitting the wrong targets. The winner is the person who has the highest score at the end of play.

The following steps outline the SHOOTING GALLERY game play:

1. Once the batteries are properly inserted into the Main Target Pod, press the Power Button on the Main Target Pod to turn on the system.

2. Select one of the 3 modes of play by pressing the Mode Button until the desired mode is selected. One of 3 Green LEDs will light up above the selected Mode Number on the Main Target Pod.

SLOT

NOTCH

CORRECTALIGNMENT