stertil-koni usa, inc. - ohio · 2010-05-05 · g-ad differential adaptor for transmission jack...

Stertil-KONI USA, Inc.

PRICE LIST

2010

Ohio State Term Schedule

www.stertil-koni.com

Kellie Boehm

[email protected]

July 2009 PRICE LIST Edition 1

MOBILE LIFTS

Model Number Description LIST PRICE

STS

PRICE

ST1060, ST1065 & ST1073 MODELS:

ST-1060 FCF

NON STOCK Set of 4 - 52,000lbs capacity, 208 to 460 volts, 3 phase, ALI/ETL, with conventional control panel $32,502 $24,377

Maximum configuration for the FCF model is a set of 4 columns

ST-1060 FSF

STOCK Set of 4 - 52,000lbs capacity, 208 to 460 volts, 3 phase, ALI/ETL, w/superior control panels on every column $33,892 $25,419


ST-1060 FWF

NON STOCK Set of 4 - 52,000lbs capacity, 24 volts DC, control box on every column $47,845 $35,884


ST-1073 FCF

200 Log Canoe Circle ˜ Stevensville ˜ Maryland ˜ 410.643.9001 ˜ 800.336.6637 ˜ 410.643.8901 (fax)

ST-1073 FCF

NON STOCK Set of 4 - 64,000lbs capacity, 208 to 460 volts, 3 phase, ALI/ETL, with conventional control panel $32,502 $24,377

Maximum configuration for the FCF model is a set of 4 columns

ST-1073 FSF STOCK Set of 4 - 64,000lbs capacity, 208 to 460 volts, 3 phase, ALI/ETL, w/superior control panels on every column $33,892 $25,419


ST-1073 FWF



ST1082 WITH SYNTHETIC FIXED FRONT WHEELS :

ST-1082 FEF

NON STOCK Set of 4 - 72,000lbs capacity, 208 to 460 volts, 3 phase, ALI/ETL, conventional control panel, $34,919 $24,792 one column w/22 cable - Maximum configuration for the E models is a set of 4 columns

ST-1082 FSF

STOCK Set of 4 - 72,000lbs capacity, 208 to 460 volts, 3 phase, ALI/ETL, control box on every column. Fxd forks. $36,308 $25,779

STOCK Set of 6 - 108,000lbs capacity, 208 to 460 volts, 3 phase, ALI/ETL, control box on every column. Fxd forks. $53,920 $38,283

ST-1082 VFSF Set of 4 - 72,000lbs capacity, 208 to 460 volts, 3 phase, ALI/ETL, detachable power box. Fxd forks. $35,973 $26,980

ST-1082 FSA

NON STOCK Set of 4 - 72,000lbs capacity, 208 to 460 volts, 3 phase, ALI/ETL, control box on every column. Adj forks. $38,783 $27,536

NON STOCK Set of 6 - 108,000lbs capacity, 208 to 460 volts, 3 phase, ALI/ETL, control box on every column. Adj forks. $57,631 $40,918

May 18, 2009 1

MOBILE LIFTS


STS

PRICE ST-1082 RSF

NON STOCK Set of 4 - 72,000lbs capacity, 208 to 460 volts, 3 phase, ALI/ETL, control box on every column. Fxd forks $40,145 $28,503


ST-1082 RSA

STOCK Set of 4 - 72,000lbs capacity, 208 to 460 volts, 3 phase, ALI/ETL, control box on every column. Adj forks $42,620 $30,260

STOCK Set of 6 - 108,000lbs capacity, 208 to 460 volts, 3 phase, ALI/ETL, control box on every column. Adj forks $63,388 $45,005

ST1082 BATTERY MODELS:

ST-1082 FBF

STOCK Set of 4 - 72,000lbs capacity, 24 volts DC, ALI/ETL, control box on every column $42,502 $30,176

STOCK Set of 6 - 108,000lbs capacity, 24 volts DC, ALI/ETL, control box on every column $63,753 $45,265

ST-1082 FBA

NON STOCK Set of 4 - 72,000lbs capacity, 24 volts DC, ALI/ETL, control box on every column. Adj forks $44,976 $31,933

NON STOCK Set of 6 - 108,000lbs capacity, 24 volts DC, ALI/ETL, control box on every column. Adj forks $67,464 $47,899


ST-1082 RBF

NON STOCK Set of 4 - 72,000lbs capacity, 24 volts DC, ALI/ETL, control box on every column, retract. wheels. Fxd forks $46,339 $32,901


ST-1082 RBA

STOCK Set of 4 - 72,000lbs capacity, 24 volts DC, ALI/ETL, control box on every column, retract. wheels. Adj forks $48,813 $34,657

STOCK Set of 6 - 108,000lbs capacity, 24 volts DC, ALI/ETL, control box on every column, retract. wheels. Adj forks $73,220 $51,986STOCK Set of 6 - 108,000lbs capacity, 24 volts DC, ALI/ETL, control box on every column, retract. wheels. Adj forks $73,220 $51,986

ST1082 WIRELESS MODELS:

ST-1082 FWF

STOCK Set of 4 - 72,000lbs capacity, 24 volts DC, control box on every column $50,519 $35,868

STOCK Set of 6 - 108,000lbs capacity, 24 volts DC, control box on every column $75,779 $53,803

ST-1082 FWA

NON STOCK Set of 4 - 72,000lbs capacity, 24 volts DC, control box on every column. Adj forks $53,208 $37,778

NON STOCK Set of 6 - 108,000lbs capacity, 24 volts DC, control box on every column. Adj forks $79,812 $56,667

ST-1082 RWF

NON STOCK Set of 4 - 72,000lbs capacity, 24 volts DC, control box on every column, retract. wheels. Fxd forks $54,583 $38,754


ST-1082 RWA

STOCK Set of 4 - 72,000lbs capacity, 24 volts DC, control box on every column, retract. wheels. Adj forks $57,237 $40,638

STOCK Set of 6 - 108,000lbs capacity, 24 volts DC, control box on every column, retract. wheels. Adj forks $85,856 $60,957

ST1100 WITH SYNTHETIC FIXED FRONT WHEELS :

ST-1100 FSF

NON STOCK Set of 4 - 88,000lbs capacity, 208 to 460 volts, 3 phase, ALI/ETL, control box on every column. Fxd forks. $38,091 $27,045

NON STOCK Set of 6 - 132,000lbs capacity, 208 to 460 volts, 3 phase, ALI/ETL, control box on every column. Fxd forks. $56,602 $40,187

May 18, 2009 2

MOBILE LIFTS


STS

PRICE ST-1100 RSF




ST-1100 FBF

NON STOCK Set of 4 - 88,000lbs capacity, 24 volts DC, ALI/ETL, control box on every column $44,401 $31,525

NON STOCK Set of 6 - 132,000lbs capacity, 24 volts DC, ALI/ETL, control box on every column $66,602 $47,287

ST-1100 RBF



ST1100 WIRELESS MODELS:

ST-1100 FWF NON STOCK Set of 4 - 88,000lbs capacity, 24 volts DC, control box on every column $52,419 $37,217


ST-1100 RWF



Reducer sleeves can be added as an accessory on all ST-1060, ST-1065, ST-1073, ST-1082, ST-1100 & ST-1175 models

Alpha designations for the mobile columns are as follows:

First letter following model number, i.e. ST1082FSF, first letter always represents the wheels.

F=Fixed wheels and R=Retractable wheels

Second letter following model number, i.e. ST1082FSF, second letter always represents the controls.

S=Superior controls, C=Conventional controls, B=Battery controls and W=Wireless

Third letter following model number, ie. ST1082FSF, third letter always represents the forks.

F=Fixed forks and A=Adjustable forks

(See Additional Installation Charges Below)

SKTJ-401 Heavy duty transmission jack, table 26"X16", 3,500lbs capacity, (38X52 Base), 74" lifting height $9,160 $6,504

SKTJ-402 Heavy duty transmission jack, table 20"X14", 3,500lbs capacity, (34X48 Base), 74" lifting height $8,881 $6,306

SKWD-500 High Lift Wheel Dolly (HLWD) with chain guard, 1,000lbs. Capacity, 52" lifting height $8,328 $5,913

SKWD-500-74 High Lift Wheel Dolly (HLWD) with chain guard, 1,000lbs. Capacity, 74" lifting height $9,798 $6,957

SKWD-501 Counter balanced High Lift Wheel Dolly (CBHLWD), 850lb. Capacity, 52" lifting height $11,240 $7,980

May 18, 2009 3

ACCESSORIES FOR MOBILE LIFTS


STS

PRICE SKTJ-402 Batt. G-GJ402 BATT Heavy duty transmission jack, table 20"X14", 3,500lbs capacity, (34X48 Base), 74" lifting height $9,701 $6,888

SKWD-500 Batt. G-DR500 BATT High Lift Wheel Dolly (HLWD) with chain guard, 1,000lbs. Capacity, 52" lifting height $9,736 $6,913

SKWD-501 Batt G-DR501 BATT Counter balanced High Lift Wheel Dolly (CBHLWD), 850lb. Capacity, 52" lifting height $12,848 $9,122

G-BDA Adaptor for standard wheel drums HLWD (G-BDA) $485 $344

G-APR Adaptor for forklift wheels (G-APR) $678 $481

G-AD Differential adaptor for transmission jack $1,357 $963

G-NAA Narrow isle adapter for forklifts $7,860 $5,581

RPJ-3.31 Rolling Pit Jack, Capacity 31,000 lbs $13,330 $9,464

Gear Plate $2,635 $1,871

Axle Traverse $2,195 $1,558

ST10 Single Phase Single Phase power option per column when ordered from factory. $482 $342

ST575V 575 voltage power option per column when ordered from factory. $482 $342

Upgrade control box Primary control box exchange (upgrade from secondary control box) $1,293 $918

ADJ ST1082 Adjustable forks ST 1082, extra price per column only when ordered with ST 1082 $698 $496

DROVER ST1082 Drive over cable for ST 1082, extra price per column only when ordered with ST 1082 $387 $275

XWF1082 Extra wide fork option for ST1082 FSF, FBF, FWF, wheel diameter up to R24.5/63". Price per column. $1,929 $1,370

XWF1100 Extra wide fork option for ST1100 FSF, FBF, FWF, wheel diameter up to R24.5/63". Price per column. $1,929 $1,370

34200940 Weight Gauge for ST1060. Price per column. Price includes part only. $657 $467



Weight Gauge installation. Price per column. Price includes labor only. $101 $71Weight Gauge installation. Price per column. Price includes labor only. $101 $71

34200915 Set baseframe and fork extension with lock for ST1060 per column, max capacity 8,800 lbs. per column $837 $595

34400915 Set baseframe & fork exten. w/lock for ST1073 & ST1082 E&F, per column, max capcity 12,000 lbs. per column $837 $595

32700920 Reducer plate with lock (right side) for ST1060 & ST1082 F (L= 350 mm/14") $329 $233

32700925 Reducer plate with lock (left side) for ST1060 & ST1082 F (L= 350 mm/14") $329 $233

34400920 Reducer plate with lock (right side) for ST1073 & ST1100 (L= 300 mm/12") $329 $233

34400925 Reducer plate with lock (left side) for ST1073 & ST1100 (L= 300 mm/12") $329 $233

34200930 Reducer plate w/lock (right side) for fork exten.ST1060 & ST1073 & ST1082 (L=500 mm/20"), cap. 4.0 tons/8,800 lbs $413 $294

34200935 Reducer plate w/lock (left side) for fork extension ST1060 & ST1073 & ST1082 (L=500 mm/20"), cap. 4.0 tons/8,800 lbs $413 $294

34400930 Reducer plate w/lock (right side) for fork extension ST1073 & ST1082 (L=500 mm/20"), cap. 5.5 tons/12,000 lbs $466 $331

34400935 Reducer plate w/lock (left side) for fork extension ST1073 & ST1082 (L=500 mm/20"), cap. 5.5 tons/12,000 lbs $466 $331

Warning: Longer reducer plates may only be used in combination with arm extensions!

See attached label on longer reducer plates for max. usable capacity.

32790205 Reducer Sleeve for ST 1065 price each $419 $297

32790210 Large Wheel Adapter ST1065 - capacity 15,000 lbs, can handle tires up to 85" diameter and 29.5" width, price ea. $1,590 $1,129

32803100 Reducer Sleeve for ST 1175 price each $451 $320

May 18, 2009 4

ACCESSORIES FOR MOBILE LIFTS


STS

PRICE

32592000 Traverse beam with king-pin adaptor, capacity 16,000 lbs, ALI certified $3,657 $2,596

32591500 Traverse beam with lifting supports, capacity 32,000 lbs., ALI certified $3,657 $2,596

32591050 Low profile cross beam with supports - capacity 33,000 lbs, ALI certified $3,763 $2,672

32591150 Low profile cross beam with supports, for 130 mm wider fork - capacity 33,000 lbs $5,279 $3,748

32591100 Low profile cross beam - capacity 18,800 lbs $3,763 $2,672

32593000 4-wheel forklift adapter kit (10 pieces) $5,385 $3,823

32593100 3-wheel forklift adapter kit (12 pieces) $6,710 $4,764

WEB 36-120ST Wheel Engaging Beam / Snow Plow Adapter, capacity 36,000 lbs, 120" max wheel base $4,825 $3,426

32559040 Lighting kit per column for ST 1060, ST1065, ST 1073, ST 1082 and ST1175 - 400V (2 pcs), per column $1,521 $1,080

32559050 Lighting kit per column for ST 1060, ST1065, ST 1073, ST 1082 and ST1175 - 230V (2 pcs), per column $1,521 $1,080

Lighting kit only suitable for Superior control

Labor for installation of lighting kit per column $307 $218

32739101 ID-Key for battery lifts $91 $65

34007930 Remote Control for ST 1060 FCF & ST 1073 FCF & ST 1082 E, Not UL Approved, 32' 10" cable $1,569 $1,114

34007940 Remote Control for ST 1060 FCF & ST 1073 FCF & ST 1082 E, UL Approved, 32' 10" cable $2,851 $2,024

32557930 Remote Control for ST 1060 FSF & ST 1073 FSF & ST 1082 F&R & ST 1175, Not UL Approved, 32' 10" cable $1,463 $1,039

32557940 Remote Control for ST 1060 FSF & ST 1073 FSF & ST 1082 F&R & ST 1175, UL Approved, 32' 10" cable $2,851 $2,024

59000890 Pelican Adaptor $4,685 $3,326

59001080 Automotive Adapter (Hummer), cap. 15,000 lbs, (2 pieces) $5,840 $4,14659001080 Automotive Adapter (Hummer), cap. 15,000 lbs, (2 pieces) $5,840 $4,146

59001320 Automotive Adapter (Hummer) Extra wide fork application, cap. 15,000 lbs, (2 pieces) $6,243 $4,433

SUPPORT STANDS BY CAPACITY AND ADJUSTMENT HEIGHT


STS

PRICE

JS-L12 Capacity 12 ton, Low, 3 positions, Range 14"-22", flat adapter $285 $202

JS-M8 Capacity 8.2 ton, Medium, Foldable, 7 positions, Range 29"-50" & 33"-55" with fine adjustment, weight 95 lbs $850 $604

JS-M12 Capacity 12 ton, Medium, Foldable, 7 positions, Range 29"-50" & 33"-55" with fine adjustment, weight 121 lbs $920 $653

JS-H8 Capacity 8.2 ton, High, Foldable, 10 locking positions, Range 49"-79" & 53"-84" with fine adjustment, weight 130 lbs $870 $618

JS-H12 Capacity 12 ton, High, Foldable, 10 positions, Range 49"-79" & 53"-84" with fine adjustment, weight 176 lbs $1,320 $937

39225980 Foldable stand storage bracket (one per stand) $120 $85

JS-M8, JS-M12, JS-H8 & JS-H12 comes with flat adapter, U-shape adapter, V-shape adapter, fine adjustment,

springloaded wheels (set of 3) and spring for inner tube as standard.

SKCP 1220-10 10 tons, no handle or wheels; 12"-20"; with pin stop $270 $192

SKCP 1830-10 10 tons, no handle or wheels; 18"-30"; with pin stop $320 $227

SKCP 2644-10 10 tons, no handle or wheels; 26"-44";with pin stop $430 $305

SKCP 3658-08 8 tons, spring loaded, wheels, pin stop, 1 head, 36"-58" $990 $703

SKCP 5278-09 9 tons, spring loaded, wheels, pin stop, 1 head, 52"-78" NEW!! (Replaced SKCP 5278-08) $990 $703

May 18, 2009 5

SUPPORT STANDS BY CAPACITY AND ADJUSTMENT HEIGHT


STS

PRICE

SKCV 1828-10 10 ton, no handle or wheels, 18"-28", fine adjustment $780 $554

SKCV 5480-07 7 tons with handle & wheels, 54"-80", fine adjustment $1,270 $902

SKCVP 3658-18 18 tons, w/handle & wheels; spring loaded; pin stop w/36"-58" fine adjustment $1,350 $959

SKCVP 5480-18 18 tons, w/handle & wheels; spring loaded; pin stop w/54"-80" fine adjustment $1,390 $987

SKCVP 5484-30 30 tons, w/handle & wheels; spring loaded; pin stop w/54"-84" fine adjustment $4,990 $3,543

SKMH 3658-12 12 tons, w/handle & wheels; spring loaded, pin stop w/36"-58" fine adjustment; 2 heads $1,360 $966

SKMH 5480-12 12 tons, w/handle & wheels; spring loaded, pin stop w/54"-80" fine adjustment; 2 heads $1,390 $987

G-STD-0050 Each additional head, please specify head required $130 $92

SK BXIW 3H 11.5 ton, 3-headed spring loaded support stand $1,320 $937

AUTOMOTIVE LIFTS


STS

PRICE

TWO POST ABOVE GROUND LIFTS

SK-2070-AB Two-post 16,000lbs capacity baseless lift with single telescoping arms $17,919 $12,723

SK-2070-A Two-post 16,000lbs capacity baseless lift with double telescoping arms $19,075 $13,543

SK-2082 Two-post 18,000lbs capacity baseless lift with single telescoping arms $21,179 $15,037

(See Additional Installation Charges Below)(See Additional Installation Charges Below)

ACCESSORIES FOR AUTOMOTIVE LIFTS


STS

PRICE

370-09-000 Lighting set for SK 2070 and SK 2082 (4 pcs) $1,198 $850

37009030 Installation kit column connections through concrete floor $890 $632

370-07-900 Additional control box for SK 2070 and SK 2082 $1,866 $1,325

37003945 Prisma adapter for Sprinter/Crafter, rear side $138 $98

37003955 Prisma adapter for Sprinter/Crafter, front side $121 $86

2 Post Single Phase Single phase power per control box for SK 2070 and SK 2082 $541 $384

4310.09.06.00 U-shaped steel pick-up pad (1 piece) $85 $60

4310.09.05.00 V-shaped steel pick-up pad (1 piece) $90 $64

4310.09.04.00 Flat steel pick-up pad (1 piece) $69 $49

370.99.013 Anchor kit for SK 2070 and SK 2082 $281 $199

HEAVY DUTY 4-POST LIFTS


STS

PRICE

ST-4120-4.5 Four post 30,000lbs capacity, 15 ft runway $29,359 $20,845

ST-4120-6.2 Four post 30,000lbs capacity, 20 ft runway $31,482 $22,352

ST-4120-8 Four post 30,000lbs capacity, 26 ft runway $33,484 $23,774

May 18, 2009 6

HEAVY DUTY 4-POST LIFTS

Model Number Description List Price STS Price

ST-4175-8 Four post 38,500lbs capacity, 26 ft runway, ALI/ETL certified $59,290 $42,096



ST-4175-11.5 Four post 38,500lbs capacity, 38 ft runway, ALI/ETL certified $66,110 $46,938

41509040 Synchronization set needed to make any Eight Post version of ST 4175 above, brigde part 3' 4" $9,889 $7,021

41509030 Synchronization set needed to make any Eight Post version of ST 4175 above, bridge part 4' 11" $12,078 $8,575





ST-4250-11.5 Four post 54,000lbs capacity, 38 ft runway, ALI/ETL certified $101,090 $71,774



All lifts available in 208 to 460VAC, 3-phase, 575V or 1-phase (extra charge)


ACCESSORIES FOR 4-POST LIFTS


41229000 Lighting set 15 feet 4 pieces ST4120 $4,176 $2,965

41219000 Lighting set 20 feet 6 pieces ST4120 $4,643 $3,29641219000 Lighting set 20 feet 6 pieces ST4120 $4,643 $3,296

41209000 Lighting set 26 feet 8 pieces ST4120 $5,067 $3,597

41209030 Standard drive on/off ramps, length 38" (2pcs); ST4120 $2,412 $1,712

40599013 Set chemical anchors and shims for ST 4100 $313 $222

41209100 Special 3rd platform for 3 wheel forklift, platform length 49", capacity 2 tons $4,759 $3,379

(not in combination with long drive-on/off ramps)

41209200 Special third platform for 3 wheel forklift, platform length 49", capacity 2 tons $5,290 $3,756

(only in combination with long drive-on/off ramps)

41209010 Long drive on/off ramps, length 58" $4,198 $2,980

43599013 Anchor kit for ST 4055, ST 4070 and ST 4120 $223 $158

Air kit - See accessories for SKYLIFTS

ST4175 and ST4250 Series

42539000 Lighting set 20 feet 208/220V $4,844 $3,439

42539010 Lighting set 20 feet 460/575V $5,438 $3,861

42549000 Lighting set for 26, 30, 33 and 38 feet platforms 208/230V $5,872 $4,169

42549010 Lighting set for 26, 30 and 33 feet platforms 460/575V $6,487 $4,606

42549020 Lighting set for 38 feet platforms 460/575V $6,487 $4,606

42509020 Short drive on/off ramps, length 20" (2pcs) $1,696 $1,204



41509010 Set standard drive on/off ramps ST4175, length 44" (2pcs) $2,533 $1,799

42509010 Set standard drive on/off ramps ST4250, length 65" (2pcs) for 33 and 38 foot runways $2,724 $1,934

42519010 Set standard drive on/off ramps, length 55" (2pcs) for 20, 26 and 30 foot runways $2,629 $1,866

42509050 Set fixed drive on/off ramps, length 104" (2pcs) for 33 and 38 foot runways $3,572 $2,536

May 18, 2009 7

42519050 Set fixed drive on/off ramps, length 85" (2pcs) for 20, 26 and 30 foot runways $3,222 $2,288

ACCESSORIES FOR 4-POST LIFTS


OPVL09170 Second control box for ST4175 $3,244 $2,303

OPVL09180 Second control box for ST4250 $3,244 $2,303

Air kit - See accessories for SKYLIFTS

HEAVY DUTY SKYLIFT


Floor mounted version:

SKY200-7 SM 41322000 SKY 200 - 44,000 lbs (61,000 with symmetrical load distribution), platform length 23' (including standard ramps) $86,306 $61,277








SKY250-14.5 SM 41307000 SKY 250 - 55,000 lbs (77,000 with symmetrical load distribution), platform length 48' (including standard ramps) $114,070 $80,990

Flush mounted version:

SKY200-7 FM 41332000 SKY 200 - 44,000 lbs (61,000 with symmetrical load distribution), platform length 23' $83,380 $59,200



SKY200-10 FM 41335000 SKY 200 - 44,000 lbs (61,000 with symmetrical load distribution), platform length 33' $89,870 $63,808SKY200-10 FM 41335000 SKY 200 - 44,000 lbs (61,000 with symmetrical load distribution), platform length 33' $89,870 $63,808





SKY250-14.5 FM 41317000 SKY 250 - 55,000 lbs (77,000 with symmetrical load distribution), platform length 48' $111,210 $78,959


ACCESSORIES FOR SKYLIFT


41300900 Lighting set for SKY 200, 23' (6 pcs), 24V, IP67 $5,099 $3,620

41300910 Lighting set for SKY 200 & SKY 250, 26'/30'/33' (8 pcs), 24V, IP67 $5,385 $3,823



42509020 Set short, drive-on/off ramps (2 pcs) $1,632 $1,159

41300400 Set fixed, standard, drive-on/off ramps (2pcs), Length 79.2" $3,668 $2,604

41300420 Set fixed, extra long, drive-on/off ramps (2pcs), Length 104.7" $4,622 $3,281

41300940 Platform extension 49.2", (not for 48' version), (2 pcs) $3,954 $2,807

34007930 Remote control with 32' 10" cable $1,208 $858

May 18, 2009 8

34007940 Remote control UL approved with 32' 10" cable $2,353 $1,671

Wash bay model $20,034 $14,224

ACCESSORIES FOR SKYLIFT


2 speed lowering, not in combination with synchronisation set $1,840 $1,306

41300950 Synchronisation set for connected versions On request On request

41312950 Set automatic recess coverplates for SKY-FM, 23' (2 pcs) $13,120 $9,315





OPVLRAL07 Extra price for 1 different colour $1,314 $933

OPVLRAL07-2 Extra price for 2 different colours $2,194 $1,558

41300990 Set chemical anchors and shims for SKYLIFT $678 $482

39509105 Air installation kit for ST 4120, ST 4175, ST 4250 and SKYLIFT; with 11.5' spiral hose (see newsletter 4/17/2009) $108 $77

39509100 Air kit for ST 4120, ST 4175, ST 4250 and SKYLIFT; w/8' air pipe, brackets and one outlet (see letter 4/17/2009) $315 $224

BECKER INGROUND LIFTS


HVa 214

2 Rams; plunger piston type; with sliding cover plates (32,000 lbs per ram) HVZ-214 BT-RG On demand On demand

3 Rams; plunger piston type; with sliding cover plates (32,000 lbs per ram) HVD-214 BT-RG On demand On demand3 Rams; plunger piston type; with sliding cover plates (32,000 lbs per ram) HVD-214 BT-RG On demand On demand

HVa 214/190

2 Rams; telescopic piston type; with sliding cover plates (32,000 lbs per ram) HVZ-214/190 BT-RG On demand On demand

3 Rams; telescopic piston type; with sliding cover plates (32,000 lbs per ram) HVD-214/190 BT-RG On demand On demand

Alpha designations for the inground lifts are as follows:

Third letter in model number (a) represents the number of pistons

i.e. HVZ = 2 Ram Lifts HVD = 3 Ram Lifts

Installation: B = Concrete Foundation

Covering: T = Sliding Trench Covers

R = Safety Bar G = Electronic Synchronism Device


ACCESSORIES FOR INGROUNDS


HVZ 214 BT-RG-1 Saddle flush mounted head pieces; fix cylinder On demand On demand

HVZ 214 BT-RG-2 Saddle flush mounted head pieces; all cylinders On demand On demand

HVZ 214 BT-RG-3 PHS; Programmable height setting (up to 4 postitions) On demand On demand

HVZ 214 BT-RG-4 AWBP; Automatic wheelbase positioning system On demand On demand

May 18, 2009 9

HVZ 214 BT-RG-5 GPS Ground Position switch w/red/green beacon light On demand On demand

HVZ 214 BT-RG-6 DLS Dual lifting speed (normal/slow) On demand On demand

HVZ 214 BT-RG-7 Frames, wheel pans and covering hot galvanized On demand On demand



HVZ 214 BT-RG-8 Segment plate covering; range of movement: 100 inches On demand On demand

HVZ 214 BT-RG-11 Cylinders lcosit coated On demand On demand

HVZ 214 BT-RG-12 Additional support for passenger cars, painted On demand On demand

HVZ 214 BT-RG-13 Additional support for passenger cars, hot galvanized On demand On demand

HVZ 214 BT-RG-14 Liquid detection system (per ram) On demand On demand

HVZ 214 BT-RG-15 Control Box Pedestal On demand On demand

HVZ 214/190 BT-RG-1 Saddle flush mounted head pieces; fix cylinder On demand On demand

HVZ 214/190 BT-RG-2 Saddle flush mounted head pieces; all cylinders On demand On demand

HVZ 214/190 BT-RG-3 PHS; Programmable height setting (up to 4 postitions) On demand On demand

HVZ 214/190 BT-RG-4 AWBP; Automatic wheelbase positioning system On demand On demand

HVZ 214/190 BT-RG-5 GPS Ground Position switch w/red/green beacon light On demand On demand

HVZ 214/190 BT-RG-6 Liquid detection system (per ram) On demand On demand

HVZ 214/190 BT-RG-7 Suction tube (per ram). Provision of material (coupling) by customer On demand On demand

HVZ 214/190 BT-RG-8 DLS Dual lifting speed (normal/slow) On demand On demand

HVZ 214/190 BT-RG-9 Frames, wheel pans and covering hot galvanized On demand On demand

HVZ 214/190 BT-RG-12 Cassette for fix ram On demand On demand

HVZ 214/190 BT-RG-13 Cassette for fix ram lcosit coated (inside/out) On demand On demand

HVZ 214/190 BT-RG-14 Cassette for movable ram, range of movement 100 inches On demand On demand

HVZ 214/190 BT-RG-16 Cassette for mov. Ram lcosit coated ( inside/out) On demand On demand

HVZ 214/190 BT-RG-17 Cylinders lcosit coated On demand On demand

HVZ 214/190 BT-RG-18 Additional support for passenger cars, painted On demand On demand

HVZ 214/190 BT-RG-19 Additional support for passenger cars, hot galvanized On demand On demandHVZ 214/190 BT-RG-19 Additional support for passenger cars, hot galvanized On demand On demand

HVZ 214/190 BT-RG-21 Control Box Pedestal On demand On demand

HVD 214 BT-RG-1 Saddle flush mounted head pieces; fix cylinder On demand On demand

HVD 214 BT-RG-2 Saddle flush mounted head pieces; all cylinders On demand On demand

HVD 214 BT-RG-3 PHS; Programmable height setting (up to 4 postitions) On demand On demand

HVD 214 BT-RG-4 AWBP; Automatic wheelbase positioning system On demand On demand

HVD 214 BT-RG-5 GPS Ground Position switch w/red/green beacon light On demand On demand

HVD 214 BT-RG-6 Speed control (normal/slow speed) On demand On demand

HVD 214 BT-RG-7 Frames, wheel pans and covering hot galvanized On demand On demand

HVD 214 BT-RG-8 Segment plate covering; range of movement: 100 inches On demand On demand

HVD 214 BT-RG-11 Cylinders lcosit coated On demand On demand

HVD 214 BT-RG-12 Additional support for passenger cars, painted On demand On demand

HVD 214 BT-RG-13 Additional support for passenger cars, hot galvanized On demand On demand

HVD 214 BT-RG-14 Liquid detection system (per ram) On demand On demand

HVD 214 BT-RG-15 Control Box Pedestal On demand On demand

HVD 214/190 BT-RG-1 Saddle flush mounted head pieces; fix cylinder On demand On demand

HVD 214/190 BT-RG-2 Saddle flush mounted head pieces; all cylinders On demand On demand

HVD 214/190 BT-RG-3 PHS; Programmable height setting (up to 4 postitions) On demand On demand

HVD 214/190 BT-RG-4 AWBP; Automatic wheelbase positioning system On demand On demand

HVD 214/190 BT-RG-5 GPS Ground Position switch w/red/green beacon light On demand On demand

HVD 214/190 BT-RG-6 Liquid detection system (per ram) On demand On demand

HVD 214/190 BT-RG-7 Suction tube (per ram). Provision of material (coupling) by customer On demand On demand

HVD 214/190 BT-RG-8 Speed control (normal/slow speed) On demand On demand

May 18, 2009 10

HVD 214/190 BT-RG-9 Frames, wheel pans and covering hot galvanized On demand On demand

HVD 214/190 BT-RG-12 Cassette for fix ram On demand On demand

HVD 214/190 BT-RG-13 Cassette for fix ram lcosit coated(inside/out) On demand On demand



HVD 214/190 BT-RG-14 Cassette for movable ram, range of movement 100 inches On demand On demand

HVD 214/190 BT-RG-15 Segment plate covering; range of movement: 100 inches On demand On demand

HVD 214/190 BT-RG-16 Cassette for mov. Ram lcosit coated On demand On demand

HVD 214/190 BT-RG-17 Cylinders lcosit coated On demand On demand

HVD 214/190 BT-RG-18 Additional support for passenger cars, painted On demand On demand

HVD 214/190 BT-RG-19 Additional support for passenger cars, hot galvanized On demand On demand

HVD 214/190 BT-RG-20 Control Box Pedestal On demand On demand

ECO LIFTS


ECO 60-10 60,000 lbs capacity with 10 ft. (120'') travel range $116,665 $82,832



ECO 90-3 90,000 lbs capacity, 1 fixed & 2 movable mechanism, (Price based on 10 ft travel front pit and 10 ft travel rear pit) $182,870 $129,838

ECO 90-3 2F 90,000 lbs capacity, 2 fixed and 1 movable mechanism, (Price based on 10 ft travel for movable mechanism) On demand On demand


ECOLIFT ACCESSORIESECOLIFT ACCESSORIES


P60 Optional remote pendant for ECO 60, when ordered with the lift $2,200 $1,562

Note: Incl. pendant, 30 ft cable, intrinsically safe barriers, hard-wired.

P60D Optional detachable remote pendant for ECO 60, when ordered with the lift $4,049 $2,875

Note: Incl. pendant, 30 ft cable, intrinsically safe barriers, connectors, hard-wired.

P60R Replacement pendant, including 30 ft cable (Does not include intrinsically safe barriers) $2,965 $2,105

P60RD Replacement detachable remote pendant for ECO 60 $4,785 $3,397

EL13 Increase box length from 10 ft. to 13 ft (156'') in travel range $4,350 $3,089

EL17 Increase box length from 10 ft. to 17 ft (204'') in travel range $9,715 $6,898

P90 Optional remote pendant for ECO 90, when ordered with the lift $3,050 $2,166

Note: Incl. pendant, 30 ft cable, intrinsically safe barriers, hard-wired.

P90D Optional detachable remote pendant for ECO 90, when ordered with the lift $4,588 $3,257

Note: Incl. pendant, 30 ft cable, intrinsically safe barriers, connectors, hard-wired.

P90R Replacement pendant, including 30 ft cable (Does not include intrinsically safe barriers) $3,770 $2,677

P90RD Replacement detachable remote pendant for ECO 90 $5,423 $3,850

Standard Adapter package included with lift:

Standard with lift: (2) 4" risers, (2) 6" risers, (2) cradles, (2) short spade, (2) tall spade-normal width (2) flat tops.

Optional Adaptors:

508-06-122 Adapter 4" extension, price each $308 $219


May 18, 2009 11

508-16-122 Adapter cradle, price each $179 $127

508-21-122 Adapter vertical axle 9 x 3.7", price each $342 $243

508-25-122 Adapter low vertical 4 x 3.7", price each $324 $230

508-31-122 Adapter flat top block, price each $307 $218

ECOLIFT ACCESSORIES


508-09-222 Adapter tall vertical 9 x 3.7", price each $345 $245

508-10-110 Adapter SP Dart, price each $332 $236


508-15-120 Adapter adjustable top, price each $415 $295

508-17-122 Adapter 10" wide cradle, price each $474 $337

508-17-132 Adapter flat accessory (use with 508-17-122), price each $550 $391

508-17-142 Adapter "H" accessory (use with 508-17-122), price each $600 $426

508-18-122 Adapter swivel cradle, price each $195 $138

508-19-122 Adapter 10" wide cradle sideways, price each $478 $339

508-23-122 Adapter vertical wider axle 9 x 7.7", price each $457 $324

508-24-122 Adapter vertical wide axle 9 x 6.2", price each $457 $324

508--27-122 Adapter Front Orion 5.5 x 3.7", price each $324 $230

508-33-122 Adapter crown top block, price each $311 $221

508-35-122 Adapter slant top block, price each $374 $266

508-45-110 Adapter Rear Transit, price each $415 $295

508-15-252 Adapter wide 14 x 11.77", price each $664 $471

Standard Cover Plates included with lift:

Standard with lift: front extruded aluminum (hinged), front drop-in aluminum (2), rear drop-in aluminum (2),

23.5" extended rear cover plate (1), front box end section covers (2).23.5" extended rear cover plate (1), front box end section covers (2).

Optional Cover Plates for continuous pit:

814-01-1XX 12" - 18" cover plate, price each $717 $509

814-01-2XX 23" - 29.75" cover plate, price each $936 $665

814-01-3XX 30.5" - 34.25" cover plate, price each $1,107 $786

813-03-322 Additional bridge bracket, price each $964 $684

Replacement drop-in aluminum diamond plate covers:

2004-14-222 Front cover, price each $751 $533

0413-01-222 Rear cover, price each $841 $597

Replacement Extruded aluminum front cover (hinged), price each $195 $138

575 Voltage Additional charge for 575V. 3 phase, 13 amp. $1,665 $1,182

Narrow console Additional charge for narrow controle console 40" wide x 15.5" deep x 68.5" tall $1,404 $997

Wallmount console Additional charge for wallmount console for pedestal or bracket mounting $2,807 $1,993

Shims (Must be ordered with the lift to ship with lift):

FS1 0.063" thickness, price each $6.10 $4




Hose Add. field installed hydraulic hose over standard length provided (see ECO order form), price per linear ft per hose $10.90 $8

May 18, 2009 12

JACKING BEAMS FOR HEAVY DUTY FOUR POST, SKY AND PARALLELOGRAM LIFTS


39614100 FL70 - 14,000lbs jacking beam for model ST4100 all lengths $8,252 $5,859

39614300 FL70 - 14,000lbs jacking beam for model VEGA 120 Lower Rail $8,252 $5,859

39614400 FL70 - 14,000lbs jacking beam for model VEGA 120 Upper Rail $8,252 $5,859

39617100 FL80 - 17,800lbs jacking beam for model ST4120 all lengths $8,252 $5,859

JACKING BEAMS FOR HEAVY DUTY FOUR POST, SKY AND PARALLELOGRAM LIFTS


39615100 FL120 - 26,400lbs jacking beam for model ST4175 $8,252 $5,859



39615500 FL120 - 35,200lbs jacking beam for model SKY 200 & 250 $8,252 $5,859

39616100 FL160 - 35,200lbs jacking beam for model ST4250 - 6, 8 & 9 mtr platforms $9,158 $6,502

39616200 FL160 - 35,200lbs jacking beam for model ST4250 - 10 & 11.5 mtr platforms $9,158 $6,502



39616500 FL160 - 35,200lbs jacking beam for model SKY 250 $9,158 $6,502

39617300 FL200 - 44,000lbs jacking beam for model VEGA340, 450, 520 Lower Rail $9,158 $6,502

39617400 FL200 - 44,000lbs jacking beam for model VEGA 340, 450, 520 Upper Rail $9,158 $6,502

39615180 Diff.beam for FL70 - FL200 to lift with both rams at one point $689 $489

39615190 U-saddle, large model, for FL70 - FL200 (2 pieces needed) $196 $139

39991000 TRT - Twin Ram Trolley for FL70 - FL200 $594 $421

42529200 Spiral airtube for ST4175 and ST4250 $625 $444

On request Adjustable crossbeam adapter (10-84 mm), capacity 26,400 lbs $1,484 $1,054

4311.70.91.00 Air-cleaning / greasing / reducing unit for jacking beams $721 $512

PARALLELOGRAM LIFTS


VEGA 240 SERIES H.= 73"

VEGA 240/50-CB-26-FM - Drive Off 50,000lbs capacity, 26 foot runway, continuous base, ALI/ETL certified (flush mount) $91,000 $64,610

VEGA 240/50-CB-26-N - Drive Off 50,000lbs capacity, 26 foot runway, continuous base, ALI/ETL certified (surface mount) $92,150 $65,427

VEGA 240/50-CB-26-FM - Drive Thru 50,000lbs capacity, 26 foot runway, continuous base, ALI/ETL certified (flush mount) $91,100 $64,681

VEGA 240/50-CB-26-N - Drive Thru 50,000lbs capacity, 26 foot runway, continuous base, ALI/ETL certified (surface mount) $94,350 $66,989

VEGA 240/50-OF-26-FM - Drive Thru 50,000lbs capacity, 26 foot runway, open floor, ALI/ETL certified (flush mount) $94,400 $67,024

VEGA 240/50-OF-26-N - Drive Off 50,000lbs capacity, 26 foot runway, open floor, ALI/ETL certified (surface mount) $95,400 $67,734


May 18, 2009 13




PARALLELOGRAM LIFTS


VEGA 240/50-CB-32-FM Drive Off 50,000lbs capacity, 32 foot runway, continuous base, ALI/ETL certified (flush mount) $106,800 $75,828












PARALLELOGRAM LIFTS



VEGA 240/50-CB-48-FM - Drive Thru 50,000lbs capacity, 48 foot runway, continuous, ALI/ETL certified (flush mount) $140,100 $99,471



VEGA 240/50-OF-48-N - Drive Off 50,000lbs capacity, 48 foot runway, open floor, ALI/ETL certified (surface mount) $148,200 $105,222VEGA 240/50-OF-48-N - Drive Off 50,000lbs capacity, 48 foot runway, open floor, ALI/ETL certified (surface mount) $148,200 $105,222








VEGA 340/75-CB-50-FM - Drive Thru 75,000lbs capacity, 50 foot runway, continuous base, 5 + 5 legs, ALI/ETL certified (flush mount) $149,700 $106,287

VEGA 340/75-CB-50-N - Drive Off 75,000lbs capacity, 50 foot runway, continuous base, 5 + 5 legs, ALI/ETL certified (surface mount) $151,100 $107,281

VEGA 340/75-OF-50-FM - Drive Thru 75,000lbs capacity, 50 foot runway, continuous base, 5 + 5 legs, ALI/ETL certified (flush mount) $156,100 $110,831

VEGA 340/75-OF-50-N - Drive Off 75,000lbs capacity, 50 foot runway, continuous base, 5 + 5 legs, ALI/ETL certified (surface mount) $157,800 $112,038










May 18, 2009 14






ACCESSORIES FOR PARALLELOGRAM LIFTS


Open Floor Extra Cost:

VEGA 240/50-OF VEGA 240/50-OF (up to L. 35') $4,400 $3,124

VEGA 340/75-OF VEGA 340/75-OF (up to L. 35') $5,050 $3,586

VEGA 450/99-OF-42 VEGA 450/99-OF-42 $8,300 $5,893

59.350.218 VEGA 240/50 & 340/75 L. = 50' $8,850 $6,284

VEGA 450/99-OF-50 VEGA 450/99-OF-50 $10,350 $7,349

Extended Width:

59.350.211 45" Inner Runway Spacing $3,177 $2,256



Extended Height:

59.350.213 Vega 180 - Vega 240 & Vega 340 - 77" Extended height $1,190 $845

59.350.214 Vega 450 & Vega 520 - 77" Extended height $1,410 $1,001

Enlarged Runways Width:Enlarged Runways Width:

59.350.215 Enlarged Runways Width Vega 240 - P.W.=32" $1,050 $746

Enlarged Runways Width Vega 340 - P.W.=32" $1,260 $895

Enlarged Runways Width Vega 340 & 450 . 50' - P.W.=32" $2,100 $1,491

Front Recess for Turn Plates

Vega 240 Runways Front Recess for Turn Plates $3,689 $2,619

Vega 340 Runways Front Recess for Turn Plates $3,689 $2,619

59-340-240 Vega 240 & Vega 340 Inner Safety Rails. (Complete Set) $5,844 $4,149

59-340-245 Vega 450 & Vega 520 Inner Safety Rails.(Complete Set) $6,074 $4,313

59.340.260 Vega 240 & Vega 340 Stainless Steel Inner Safety Rails.(Complete Set) $6,384 $4,533

59.340.270 Vega 450 & Vega 520 Stainless Steel Inner Safety Rails.(Complete Set) $6,888 $4,891

Vega 240 & Vega 340 Extra cost for Stainless Steel Outer Safety Rails $1,070 $760

Vega 450 & Vega 520 Extra cost for Stainless Steel Outer Safety Rails $1,620 $1,150

59.350.217 No Torsion Bar option for Vega Lift $12,030 $8,541

59.340.250 Rolling Oil Drain Pan, 25 gallon capacity $635 $451

59-360.150 24 Volt Lighting for Vega 180, 240 & 340 (8 Lamps Kit). $3,518 $2,498

59-370-150 24 Volt Lighting for Vega 450 & Vega 520 (10 Lamps Kit) $4,408 $3,129

59-340-175 Zinc Coated & Waterproof Control Panel Cover for Vega Lifts $604 $429

May 18, 2009 15

59-340-204 VEGA 240 L.= 26' - Zinc coating (Hot Galvanized). Flush Mount & Surface Mount Drive Off. $14,023 $9,956

59-340-205 VEGA 240 L.= 26' - Zinc coating (Hot Galvanized). Surface Mount Drive Through. $15,040 $10,679









VEGA 340 L.= 48' - Zinc coating (Hot Galvanized). Surface Mount Drive Through. $26,345 $18,705



VEGA 340/450 L.= 50' - Zinc coating (Hot Galvanized). Flush Mount & Surface Mount Drive Off. $26,800 $19,028

VEGA 340/450 L.= 50' - Zinc coating (Hot Galvanized). Surface Mount Drive Through. $27,800 $19,738

Extended Access Ramps Extra Cost:

59-350-220 Vega 240 Low Profile Ramps L.=120". (set of 2) $1,549 $1,100

59-350-221 Vega 340 - Vega 450 & Vega 520 Low Profile Ramps L.=120". (set of 2) $1,549 $1,100



59-350-223 Vega 240 Low Profile Ramps L.=138". (set of 2) $1,786 $1,268

59-350-224 Vega 340 - Vega 450 & Vega 520 Low Profile Ramps L.=138". (set of 2) $1,786 $1,26859-350-224 Vega 340 - Vega 450 & Vega 520 Low Profile Ramps L.=138". (set of 2) $1,786 $1,268

Vega 240 Low Profile Ramps L.=177". (Set of 2) $2,822 $2,003

Vega 340 - Vega 450 & Vega 520 Low Profile Ramps L.=177". (Set of 2) $2,822 $2,003

59-340-215 Auto pit cover plates (flush mount units) Vega 120/180/240/340/450/520 $5,954 $4,228

Hot Galvanized Automatic Pit Cover Plate Kit for Vega 340 $10,089 $7,163

Base Plate Stainless Steel Base Plate for Continuous Base Lifts $397 $282

Oil Pipes & Fittings Stainless Steel Oil Pipes & Oil Fittings up to 32' Platform length $2,507 $1,780

Oil Pipes & Fittings L. 50' Stainless Steel Oil Pipes & Oil Fittings up to 50' Platform length $3,950 $2,805

Stainless Steel Screws Structural 10.9 grade Screws Set for VEGA 340/75 with 10 Legs $3,900 $2,769

Stainless Steel Pins Pivot Pins Set for VEGA 340/75 & VEGA 450/99 with 10 Legs $4,820 $3,422

59-350-225 600Vac. Motor for Vega Lifts $735 $522

Remote Control Hand Held Key Board $1,984 $1,409

Lift Height Control Height Limit Microswitch $418 $297

119901 Anti-skid paint, 5 gallon $952 $676

59-350-227 Internal Air Kit (Set of 4 Air Fittings for Runways) $953 $676

59-350-228 Audible descent alarm $220 $156

Control Panel for VEGA lifts NEMA 4 x $1,490 $1,058

Alignment turn plate cut-out for Vega 180. Must reinforce runways. Both runways included. $3,400 $2,414

Alignment turn plate cut-out for Vega 240 & 340. Reinforment of runways not needed. Both runways included. $1,621 $1,151

May 18, 2009 16

ACCESSORIES FOR ALL PLATFORM LIFTS


66701104 Anti-skid alum. diamond plate 15 3/4" x 49 1/5", 30' length platform lift requires a total of 14 plates, (Price per plate) $229 $163

66701106 Anti-skid alum. diamond plate 23 3/5" x 49 1/5", 30' length platform lift requires a total of 14 plates, (Price per plate) $271 $192

61001022 Cleaner/assembly set for anti-skid aluminum diamond plate $214 $152

AIR HYDRAULIC PIT JACKS


GD100 11T Complete pit jack including cradle $9,667 $6,864

GD150 16.5T Complete pit jack including cradle $11,045 $7,842

GD200 22T Complete pit jack including cradle $11,980 $8,506

ACCESSORIES:

58-100-00 16.5T Cross beam adapter (T150), adjustable from 6.9" to 30" $1,749 $1,242

90-716-00 22T 9.8" extension (FG 250) $297 $211

90-718-00 22T Integrated safety stand (S200) $1,188 $843

90-717-00 5.7" saddle (SB) with hole for oil plug $234 $166

HYDRAULIC TRANSMISSION JACK


VL10 2200 lbs. Vertical lift with AS-2 $1,393 $989VL10 2200 lbs. Vertical lift with AS-2 $1,393 $989

VLT12 2600 lbs. Vertical telescopic lift with AS-2 $3,784 $2,687

ACCESSORIES:

90-588-00 600 lbs. Adjustable saddle (AS-1) $470 $334

90-596-00 1650 lbs. Adjustable saddle (AS-2) $1,140 $809

HYDRAULIC WHEEL TROLLEYS


WT500 .6T For wheel diameter 31.5" - 55" $3,487 $2,476

WT1000 1.1T For wheel diameter more than 39.4" $5,077 $3,605

JACK STANDS


5000N 5.0T 5 Positions - 15" / 23.5" $199 $141

7500N 7.5T 6 Positions - 26"/ 40" $412 $293

7500NL 7.5T 3 Positions, low model - 11.5 / 17" $349 $248

May 18, 2009 17

“Raising Your Profits”

OHIO DAS STSLIFT INSTALLATION SCHEDULE OF VALUES

Section: Scope of Work

Lift Control Conduits: 35 ft. of underground air/hydraulic chase and electrical control conduit from the lift to the control panel where a recess mount is specified.

Material Handling: Forklifts or mobile cranes to off-load and set lifts in place.

Lift Installation: Anchors, oil, electrical, air, and miscellaneous materials and labor for a certified professionally installed lift

.Project Management: Coordination with the owner, site, construction, contractor, training, and

documentation.

Lift Control Conduits ProjectStyle (When Specified) Material Handling Lift Installation Management

2-Post 1,925 1,444 3,879

4-Post 1,925 1,444 3,879 1,325

Parallelogram 1,925 1,444 4,350 1,650

Skylift 1,925 1,444 4,100 1,650

Mobile Columns(Set of Four)

600

200 Log Canoe CircleStevensville, MD 21666Phone: 410.643.9001Fax: 410.643.8901E-Mail: [email protected]

MODEL DESCRIPTION STS PRICE INSTALLATION ELECTRICAL AIR CONDUIT SUMP CONSTRUCTION HANDLING FREIGHT INSTALL PM

ECO60-10 60,000# CAPACITY WITH 10' (120") TRAVEL RANGE - ONE FIXED & ONE MOVABLE UNIT IN TWO PITS 82,832.15$ 43,250.00$ 2,500.00$ 1,000.00$ 1,000.00$ 750.00$ 25,000.00$ 1,000.00$ 2,000.00$ 7,000.00$ 3,000.00$



ECO60-10 SINGLE PIT 60,000# CAPACITY WITH 10' (120") TRAVEL RANGE - ONE FIXED & ONE MOVABLE UNIT IN ONE PIT 86,461.67$ 42,250.00$ 2,500.00$ 1,000.00$ 1,000.00$ 750.00$ 24,000.00$ 1,000.00$ 2,000.00$ 7,000.00$ 3,000.00$



ECO90-3 90,000# CAPACITY WITH TWO 10' (120") TRAVEL RANGES - ONE FIXED & TWO MOVABLE UNITS IN THREE PITS 129,838.00$ 72,000.00$ 2,500.00$ 1,000.00$ 1,500.00$ 1,500.00$ 44,500.00$ 2,000.00$ 3,000.00$ 11,000.00$ 5,000.00$

ECO90-3 EL13 90,000# CAPACITY WITH TWO 13' (156") TRAVEL RANGES - ONE FIXED & TWO MOVABLE UNITS IN THREE PITS 136,014.70$ 88,250.00$ 2,500.00$ 1,000.00$ 1,500.00$ 1,500.00$ 58,750.00$ 2,000.00$ 3,000.00$ 13,000.00$ 5,000.00$

ECO90-3 EL17 90,000# CAPACITY WITH TWO 17' (204") TRAVEL RANGES - ONE FIXED & TWO MOVABLE UNITS IN THREE PITS 143,633.00$ 111,500.00$ 2,500.00$ 1,000.00$ 1,500.00$ 1,500.00$ 78,000.00$ 2,000.00$ 3,000.00$ 17,000.00$ 5,000.00$

ECO90-3 DFM EL10 90,000# CAPACITY WITH TWO FIXED & ONE MOVABLE 10' (120") TRAVEL RANGE UNITS IN TWO PITS On Demand 55,000.00$ 2,500.00$ 1,000.00$ 1,000.00$ 1,500.00$ 28,000.00$ 2,000.00$ 3,000.00$ 11,000.00$ 5,000.00$



OPTIONS

P60 REMOTE PENDANT INCLUDING PENDANT, 30 FT. CABLE, DIN CONNECTOR, PREWIRED (WHEN ORDERED W/LIFT) 1,562.00$

P90 REMOTE PENDANT INCLUDING PENDANT, 30 FT. CABLE, DIN CONNECTOR, PREWIRED (WHEN ORDERED W/LIFT) 2,166.00$

LIQUID DETECTION KIT MECHANICAL FLOAT SYSTEM FOR DETECTING FLUIDS IN SUMP 284.00$

SUMP PUMP AIR DIAPHRAM PUMP FOR MANUAL PIT DRAINAGE 1,509.00$

508-17-142 ADAPTERS TWO HENDRICKSON SUSPENION INSERT ADAPTERS 852.00$

ADAPTER STAND 358.00$

SCOPE OF WORK

ELECTRICAL 100 FT. OF 3-PHASE POWER WIRING, CONNECTION DEVICES, DISCONNECT, AND ELECTRICAL PANEL BREAKER

AIR PIPING 25 FT. OF RIGID AIR PIPING, SHUT OFF, & CONSOLE MOUNTED COMBINATION AIR REGULATOR,FILTER, AUTO DRAIN

LIFT CONTROL CONDUITS 100 FT. OF AIR/HYDRAULIC CHASE FROM CONTROL CONSOLE TO FIXED AND MOVABLE LIFT

SUMP PIT ONE SUMP PIT AND ONE DRAIN (SUMP PUMP/ TRAP/EXTERNAL DRAINAGE NOT INCLUDED)

CONSTRUCTION SAW CUTTING, DEMOLITION, AND EXCAVATING, CONCRETING, FINISHING

MATERIAL HANDLING FORK LIFTS OR MOBILE CRANES TO OFF LOAD AND SET LIFTS IN PERMANENT LOCATION

MATERIAL AND LABOR ANCHORS, OIL, ELECTRICAL, AIR, AND MISC. MATERIALS AND LABOR FOR A PROFESSIONAL INSTALLED LIFT SYSTEM

PROJECT MANAGEMENT COORDINATION WITH OWNER, SITE, CONSTRUCTION, CONTRACTORS, TRAINING, AND DOCUMENTATION

FREIGHT SHIPPING FOB TO SITE

stertil-koni usa, inc. - ohio · 2010-05-05 · g-ad differential adaptor for transmission jack...

Documents