Stertil-KONI USA, Inc.
PRICE LIST
2010
Ohio State Term Schedule
www.stertil-koni.com
Kellie Boehm
July 2009 PRICE LIST Edition 1
MOBILE LIFTS
Model Number Description LIST PRICE
STS
PRICE
ST1060, ST1065 & ST1073 MODELS:
ST-1060 FCF
NON STOCK Set of 4 - 52,000lbs capacity, 208 to 460 volts, 3 phase, ALI/ETL, with conventional control panel $32,502 $24,377
Maximum configuration for the FCF model is a set of 4 columns
ST-1060 FSF
STOCK Set of 4 - 52,000lbs capacity, 208 to 460 volts, 3 phase, ALI/ETL, w/superior control panels on every column $33,892 $25,419
STOCK Set of 6 - 72,000lbs capacity, 208 to 460 volts, 3 phase, ALI/ETL, w/superior control panels on every column $50,838 $38,129
ST-1060 FWF
NON STOCK Set of 4 - 52,000lbs capacity, 24 volts DC, control box on every column $47,845 $35,884
NON STOCK Set of 6 - 72,000lbs capacity, 24 volts DC, control box on every column $71,768 $53,826
ST-1073 FCF
200 Log Canoe Circle ˜ Stevensville ˜ Maryland ˜ 410.643.9001 ˜ 800.336.6637 ˜ 410.643.8901 (fax)
ST-1073 FCF
NON STOCK Set of 4 - 64,000lbs capacity, 208 to 460 volts, 3 phase, ALI/ETL, with conventional control panel $32,502 $24,377
Maximum configuration for the FCF model is a set of 4 columns
ST-1073 FSF STOCK Set of 4 - 64,000lbs capacity, 208 to 460 volts, 3 phase, ALI/ETL, w/superior control panels on every column $33,892 $25,419
STOCK Set of 6 - 80,000lbs capacity, 208 to 460 volts, 3 phase, ALI/ETL, w/superior control panels on every column $50,838 $38,129
ST-1073 FWF
NON STOCK Set of 4 - 64,000lbs capacity, 24 volts DC, control box on every column $47,845 $35,884
NON STOCK Set of 6 - 80,000lbs capacity, 24 volts DC, control box on every column $71,768 $53,826
ST1082 WITH SYNTHETIC FIXED FRONT WHEELS :
ST-1082 FEF
NON STOCK Set of 4 - 72,000lbs capacity, 208 to 460 volts, 3 phase, ALI/ETL, conventional control panel, $34,919 $24,792 one column w/22 cable - Maximum configuration for the E models is a set of 4 columns
ST-1082 FSF
STOCK Set of 4 - 72,000lbs capacity, 208 to 460 volts, 3 phase, ALI/ETL, control box on every column. Fxd forks. $36,308 $25,779
STOCK Set of 6 - 108,000lbs capacity, 208 to 460 volts, 3 phase, ALI/ETL, control box on every column. Fxd forks. $53,920 $38,283
ST-1082 VFSF Set of 4 - 72,000lbs capacity, 208 to 460 volts, 3 phase, ALI/ETL, detachable power box. Fxd forks. $35,973 $26,980
ST-1082 FSA
NON STOCK Set of 4 - 72,000lbs capacity, 208 to 460 volts, 3 phase, ALI/ETL, control box on every column. Adj forks. $38,783 $27,536
NON STOCK Set of 6 - 108,000lbs capacity, 208 to 460 volts, 3 phase, ALI/ETL, control box on every column. Adj forks. $57,631 $40,918
May 18, 2009 1
MOBILE LIFTS
Model Number Description LIST PRICE
STS
PRICE ST-1082 RSF
NON STOCK Set of 4 - 72,000lbs capacity, 208 to 460 volts, 3 phase, ALI/ETL, control box on every column. Fxd forks $40,145 $28,503
NON STOCK Set of 6 - 108,000lbs capacity, 208 to 460 volts, 3 phase, ALI/ETL, control box on every column. Fxd forks $59,676 $42,370
ST-1082 RSA
STOCK Set of 4 - 72,000lbs capacity, 208 to 460 volts, 3 phase, ALI/ETL, control box on every column. Adj forks $42,620 $30,260
STOCK Set of 6 - 108,000lbs capacity, 208 to 460 volts, 3 phase, ALI/ETL, control box on every column. Adj forks $63,388 $45,005
ST1082 BATTERY MODELS:
ST-1082 FBF
STOCK Set of 4 - 72,000lbs capacity, 24 volts DC, ALI/ETL, control box on every column $42,502 $30,176
STOCK Set of 6 - 108,000lbs capacity, 24 volts DC, ALI/ETL, control box on every column $63,753 $45,265
ST-1082 FBA
NON STOCK Set of 4 - 72,000lbs capacity, 24 volts DC, ALI/ETL, control box on every column. Adj forks $44,976 $31,933
NON STOCK Set of 6 - 108,000lbs capacity, 24 volts DC, ALI/ETL, control box on every column. Adj forks $67,464 $47,899
ST1082 BATTERY MODELS:
ST-1082 RBF
NON STOCK Set of 4 - 72,000lbs capacity, 24 volts DC, ALI/ETL, control box on every column, retract. wheels. Fxd forks $46,339 $32,901
NON STOCK Set of 6 - 108,000lbs capacity, 24 volts DC, ALI/ETL, control box on every column, retract. wheels. Fxd forks $69,509 $49,351
ST-1082 RBA
STOCK Set of 4 - 72,000lbs capacity, 24 volts DC, ALI/ETL, control box on every column, retract. wheels. Adj forks $48,813 $34,657
STOCK Set of 6 - 108,000lbs capacity, 24 volts DC, ALI/ETL, control box on every column, retract. wheels. Adj forks $73,220 $51,986STOCK Set of 6 - 108,000lbs capacity, 24 volts DC, ALI/ETL, control box on every column, retract. wheels. Adj forks $73,220 $51,986
ST1082 WIRELESS MODELS:
ST-1082 FWF
STOCK Set of 4 - 72,000lbs capacity, 24 volts DC, control box on every column $50,519 $35,868
STOCK Set of 6 - 108,000lbs capacity, 24 volts DC, control box on every column $75,779 $53,803
ST-1082 FWA
NON STOCK Set of 4 - 72,000lbs capacity, 24 volts DC, control box on every column. Adj forks $53,208 $37,778
NON STOCK Set of 6 - 108,000lbs capacity, 24 volts DC, control box on every column. Adj forks $79,812 $56,667
ST-1082 RWF
NON STOCK Set of 4 - 72,000lbs capacity, 24 volts DC, control box on every column, retract. wheels. Fxd forks $54,583 $38,754
NON STOCK Set of 6 - 108,000lbs capacity, 24 volts DC, control box on every column, retract. wheels. Fxd forks $81,875 $58,131
ST-1082 RWA
STOCK Set of 4 - 72,000lbs capacity, 24 volts DC, control box on every column, retract. wheels. Adj forks $57,237 $40,638
STOCK Set of 6 - 108,000lbs capacity, 24 volts DC, control box on every column, retract. wheels. Adj forks $85,856 $60,957
ST1100 WITH SYNTHETIC FIXED FRONT WHEELS :
ST-1100 FSF
NON STOCK Set of 4 - 88,000lbs capacity, 208 to 460 volts, 3 phase, ALI/ETL, control box on every column. Fxd forks. $38,091 $27,045
NON STOCK Set of 6 - 132,000lbs capacity, 208 to 460 volts, 3 phase, ALI/ETL, control box on every column. Fxd forks. $56,602 $40,187
May 18, 2009 2
MOBILE LIFTS
Model Number Description LIST PRICE
STS
PRICE ST-1100 RSF
NON STOCK Set of 4 - 88,000lbs capacity, 208 to 460 volts, 3 phase, ALI/ETL, control box on every column. Fxd forks $42,655 $30,285
NON STOCK Set of 6 - 132,000lbs capacity, 208 to 460 volts, 3 phase, ALI/ETL, control box on every column. Fxd forks $63,423 $45,030
ST1100 BATTERY MODELS:
ST-1100 FBF
NON STOCK Set of 4 - 88,000lbs capacity, 24 volts DC, ALI/ETL, control box on every column $44,401 $31,525
NON STOCK Set of 6 - 132,000lbs capacity, 24 volts DC, ALI/ETL, control box on every column $66,602 $47,287
ST-1100 RBF
NON STOCK Set of 4 - 88,000lbs capacity, 24 volts DC, ALI/ETL, control box on every column, retract. wheels. Fxd forks $49,831 $35,380
NON STOCK Set of 6 - 132,000lbs capacity, 24 volts DC, ALI/ETL, control box on every column, retract. wheels. Fxd forks $74,747 $53,070
ST1100 WIRELESS MODELS:
ST-1100 FWF NON STOCK Set of 4 - 88,000lbs capacity, 24 volts DC, control box on every column $52,419 $37,217
NON STOCK Set of 6 - 132,000lbs capacity, 24 volts DC, control box on every column $78,629 $55,827
ST-1100 RWF
NON STOCK Set of 4 - 88,000lbs capacity, 24 volts DC, control box on every column, retract. wheels. Fxd forks $57,465 $40,800
NON STOCK Set of 6 - 132,000lbs capacity, 24 volts DC, control box on every column, retract. wheels. Fxd forks $86,198 $61,201
Reducer sleeves can be added as an accessory on all ST-1060, ST-1065, ST-1073, ST-1082, ST-1100 & ST-1175 models
Alpha designations for the mobile columns are as follows:
First letter following model number, i.e. ST1082FSF, first letter always represents the wheels.
F=Fixed wheels and R=Retractable wheels
Second letter following model number, i.e. ST1082FSF, second letter always represents the controls.
S=Superior controls, C=Conventional controls, B=Battery controls and W=Wireless
Third letter following model number, ie. ST1082FSF, third letter always represents the forks.
F=Fixed forks and A=Adjustable forks
(See Additional Installation Charges Below)
SKTJ-401 Heavy duty transmission jack, table 26"X16", 3,500lbs capacity, (38X52 Base), 74" lifting height $9,160 $6,504
SKTJ-402 Heavy duty transmission jack, table 20"X14", 3,500lbs capacity, (34X48 Base), 74" lifting height $8,881 $6,306
SKWD-500 High Lift Wheel Dolly (HLWD) with chain guard, 1,000lbs. Capacity, 52" lifting height $8,328 $5,913
SKWD-500-74 High Lift Wheel Dolly (HLWD) with chain guard, 1,000lbs. Capacity, 74" lifting height $9,798 $6,957
SKWD-501 Counter balanced High Lift Wheel Dolly (CBHLWD), 850lb. Capacity, 52" lifting height $11,240 $7,980
May 18, 2009 3
ACCESSORIES FOR MOBILE LIFTS
Model Number Description LIST PRICE
STS
PRICE SKTJ-402 Batt. G-GJ402 BATT Heavy duty transmission jack, table 20"X14", 3,500lbs capacity, (34X48 Base), 74" lifting height $9,701 $6,888
SKWD-500 Batt. G-DR500 BATT High Lift Wheel Dolly (HLWD) with chain guard, 1,000lbs. Capacity, 52" lifting height $9,736 $6,913
SKWD-501 Batt G-DR501 BATT Counter balanced High Lift Wheel Dolly (CBHLWD), 850lb. Capacity, 52" lifting height $12,848 $9,122
G-BDA Adaptor for standard wheel drums HLWD (G-BDA) $485 $344
G-APR Adaptor for forklift wheels (G-APR) $678 $481
G-AD Differential adaptor for transmission jack $1,357 $963
G-NAA Narrow isle adapter for forklifts $7,860 $5,581
RPJ-3.31 Rolling Pit Jack, Capacity 31,000 lbs $13,330 $9,464
Gear Plate $2,635 $1,871
Axle Traverse $2,195 $1,558
ST10 Single Phase Single Phase power option per column when ordered from factory. $482 $342
ST575V 575 voltage power option per column when ordered from factory. $482 $342
Upgrade control box Primary control box exchange (upgrade from secondary control box) $1,293 $918
ADJ ST1082 Adjustable forks ST 1082, extra price per column only when ordered with ST 1082 $698 $496
DROVER ST1082 Drive over cable for ST 1082, extra price per column only when ordered with ST 1082 $387 $275
XWF1082 Extra wide fork option for ST1082 FSF, FBF, FWF, wheel diameter up to R24.5/63". Price per column. $1,929 $1,370
XWF1100 Extra wide fork option for ST1100 FSF, FBF, FWF, wheel diameter up to R24.5/63". Price per column. $1,929 $1,370
34200940 Weight Gauge for ST1060. Price per column. Price includes part only. $657 $467
34400940 Weight Gauge for ST1073. Price per column. Price includes part only. $657 $467
32709120 Weight Gauge for ST1082. Price per column. Price includes part only. $657 $467
Weight Gauge installation. Price per column. Price includes labor only. $101 $71Weight Gauge installation. Price per column. Price includes labor only. $101 $71
34200915 Set baseframe and fork extension with lock for ST1060 per column, max capacity 8,800 lbs. per column $837 $595
34400915 Set baseframe & fork exten. w/lock for ST1073 & ST1082 E&F, per column, max capcity 12,000 lbs. per column $837 $595
32700920 Reducer plate with lock (right side) for ST1060 & ST1082 F (L= 350 mm/14") $329 $233
32700925 Reducer plate with lock (left side) for ST1060 & ST1082 F (L= 350 mm/14") $329 $233
34400920 Reducer plate with lock (right side) for ST1073 & ST1100 (L= 300 mm/12") $329 $233
34400925 Reducer plate with lock (left side) for ST1073 & ST1100 (L= 300 mm/12") $329 $233
34200930 Reducer plate w/lock (right side) for fork exten.ST1060 & ST1073 & ST1082 (L=500 mm/20"), cap. 4.0 tons/8,800 lbs $413 $294
34200935 Reducer plate w/lock (left side) for fork extension ST1060 & ST1073 & ST1082 (L=500 mm/20"), cap. 4.0 tons/8,800 lbs $413 $294
34400930 Reducer plate w/lock (right side) for fork extension ST1073 & ST1082 (L=500 mm/20"), cap. 5.5 tons/12,000 lbs $466 $331
34400935 Reducer plate w/lock (left side) for fork extension ST1073 & ST1082 (L=500 mm/20"), cap. 5.5 tons/12,000 lbs $466 $331
Warning: Longer reducer plates may only be used in combination with arm extensions!
See attached label on longer reducer plates for max. usable capacity.
32790205 Reducer Sleeve for ST 1065 price each $419 $297
32790210 Large Wheel Adapter ST1065 - capacity 15,000 lbs, can handle tires up to 85" diameter and 29.5" width, price ea. $1,590 $1,129
32803100 Reducer Sleeve for ST 1175 price each $451 $320
May 18, 2009 4
ACCESSORIES FOR MOBILE LIFTS
Model Number Description LIST PRICE
STS
PRICE
32592000 Traverse beam with king-pin adaptor, capacity 16,000 lbs, ALI certified $3,657 $2,596
32591500 Traverse beam with lifting supports, capacity 32,000 lbs., ALI certified $3,657 $2,596
32591050 Low profile cross beam with supports - capacity 33,000 lbs, ALI certified $3,763 $2,672
32591150 Low profile cross beam with supports, for 130 mm wider fork - capacity 33,000 lbs $5,279 $3,748
32591100 Low profile cross beam - capacity 18,800 lbs $3,763 $2,672
32593000 4-wheel forklift adapter kit (10 pieces) $5,385 $3,823
32593100 3-wheel forklift adapter kit (12 pieces) $6,710 $4,764
WEB 36-120ST Wheel Engaging Beam / Snow Plow Adapter, capacity 36,000 lbs, 120" max wheel base $4,825 $3,426
32559040 Lighting kit per column for ST 1060, ST1065, ST 1073, ST 1082 and ST1175 - 400V (2 pcs), per column $1,521 $1,080
32559050 Lighting kit per column for ST 1060, ST1065, ST 1073, ST 1082 and ST1175 - 230V (2 pcs), per column $1,521 $1,080
Lighting kit only suitable for Superior control
Labor for installation of lighting kit per column $307 $218
32739101 ID-Key for battery lifts $91 $65
34007930 Remote Control for ST 1060 FCF & ST 1073 FCF & ST 1082 E, Not UL Approved, 32' 10" cable $1,569 $1,114
34007940 Remote Control for ST 1060 FCF & ST 1073 FCF & ST 1082 E, UL Approved, 32' 10" cable $2,851 $2,024
32557930 Remote Control for ST 1060 FSF & ST 1073 FSF & ST 1082 F&R & ST 1175, Not UL Approved, 32' 10" cable $1,463 $1,039
32557940 Remote Control for ST 1060 FSF & ST 1073 FSF & ST 1082 F&R & ST 1175, UL Approved, 32' 10" cable $2,851 $2,024
59000890 Pelican Adaptor $4,685 $3,326
59001080 Automotive Adapter (Hummer), cap. 15,000 lbs, (2 pieces) $5,840 $4,14659001080 Automotive Adapter (Hummer), cap. 15,000 lbs, (2 pieces) $5,840 $4,146
59001320 Automotive Adapter (Hummer) Extra wide fork application, cap. 15,000 lbs, (2 pieces) $6,243 $4,433
SUPPORT STANDS BY CAPACITY AND ADJUSTMENT HEIGHT
Model Number Description LIST PRICE
STS
PRICE
JS-L12 Capacity 12 ton, Low, 3 positions, Range 14"-22", flat adapter $285 $202
JS-M8 Capacity 8.2 ton, Medium, Foldable, 7 positions, Range 29"-50" & 33"-55" with fine adjustment, weight 95 lbs $850 $604
JS-M12 Capacity 12 ton, Medium, Foldable, 7 positions, Range 29"-50" & 33"-55" with fine adjustment, weight 121 lbs $920 $653
JS-H8 Capacity 8.2 ton, High, Foldable, 10 locking positions, Range 49"-79" & 53"-84" with fine adjustment, weight 130 lbs $870 $618
JS-H12 Capacity 12 ton, High, Foldable, 10 positions, Range 49"-79" & 53"-84" with fine adjustment, weight 176 lbs $1,320 $937
39225980 Foldable stand storage bracket (one per stand) $120 $85
JS-M8, JS-M12, JS-H8 & JS-H12 comes with flat adapter, U-shape adapter, V-shape adapter, fine adjustment,
springloaded wheels (set of 3) and spring for inner tube as standard.
SKCP 1220-10 10 tons, no handle or wheels; 12"-20"; with pin stop $270 $192
SKCP 1830-10 10 tons, no handle or wheels; 18"-30"; with pin stop $320 $227
SKCP 2644-10 10 tons, no handle or wheels; 26"-44";with pin stop $430 $305
SKCP 3658-08 8 tons, spring loaded, wheels, pin stop, 1 head, 36"-58" $990 $703
SKCP 5278-09 9 tons, spring loaded, wheels, pin stop, 1 head, 52"-78" NEW!! (Replaced SKCP 5278-08) $990 $703
May 18, 2009 5
SUPPORT STANDS BY CAPACITY AND ADJUSTMENT HEIGHT
Model Number Description LIST PRICE
STS
PRICE
SKCV 1828-10 10 ton, no handle or wheels, 18"-28", fine adjustment $780 $554
SKCV 5480-07 7 tons with handle & wheels, 54"-80", fine adjustment $1,270 $902
SKCVP 3658-18 18 tons, w/handle & wheels; spring loaded; pin stop w/36"-58" fine adjustment $1,350 $959
SKCVP 5480-18 18 tons, w/handle & wheels; spring loaded; pin stop w/54"-80" fine adjustment $1,390 $987
SKCVP 5484-30 30 tons, w/handle & wheels; spring loaded; pin stop w/54"-84" fine adjustment $4,990 $3,543
SKMH 3658-12 12 tons, w/handle & wheels; spring loaded, pin stop w/36"-58" fine adjustment; 2 heads $1,360 $966
SKMH 5480-12 12 tons, w/handle & wheels; spring loaded, pin stop w/54"-80" fine adjustment; 2 heads $1,390 $987
G-STD-0050 Each additional head, please specify head required $130 $92
SK BXIW 3H 11.5 ton, 3-headed spring loaded support stand $1,320 $937
AUTOMOTIVE LIFTS
Model Number Description LIST PRICE
STS
PRICE
TWO POST ABOVE GROUND LIFTS
SK-2070-AB Two-post 16,000lbs capacity baseless lift with single telescoping arms $17,919 $12,723
SK-2070-A Two-post 16,000lbs capacity baseless lift with double telescoping arms $19,075 $13,543
SK-2082 Two-post 18,000lbs capacity baseless lift with single telescoping arms $21,179 $15,037
(See Additional Installation Charges Below)(See Additional Installation Charges Below)
ACCESSORIES FOR AUTOMOTIVE LIFTS
Model Number Description LIST PRICE
STS
PRICE
370-09-000 Lighting set for SK 2070 and SK 2082 (4 pcs) $1,198 $850
37009030 Installation kit column connections through concrete floor $890 $632
370-07-900 Additional control box for SK 2070 and SK 2082 $1,866 $1,325
37003945 Prisma adapter for Sprinter/Crafter, rear side $138 $98
37003955 Prisma adapter for Sprinter/Crafter, front side $121 $86
2 Post Single Phase Single phase power per control box for SK 2070 and SK 2082 $541 $384
4310.09.06.00 U-shaped steel pick-up pad (1 piece) $85 $60
4310.09.05.00 V-shaped steel pick-up pad (1 piece) $90 $64
4310.09.04.00 Flat steel pick-up pad (1 piece) $69 $49
370.99.013 Anchor kit for SK 2070 and SK 2082 $281 $199
HEAVY DUTY 4-POST LIFTS
Model Number Description LIST PRICE
STS
PRICE
ST-4120-4.5 Four post 30,000lbs capacity, 15 ft runway $29,359 $20,845
ST-4120-6.2 Four post 30,000lbs capacity, 20 ft runway $31,482 $22,352
ST-4120-8 Four post 30,000lbs capacity, 26 ft runway $33,484 $23,774
May 18, 2009 6
HEAVY DUTY 4-POST LIFTS
Model Number Description List Price STS Price
ST-4175-8 Four post 38,500lbs capacity, 26 ft runway, ALI/ETL certified $59,290 $42,096
ST-4175-9 Four post 38,500lbs capacity, 30 ft runway, ALI/ETL certified $59,840 $42,486
ST-4175-10 Four post 38,500lbs capacity, 33 ft runway, ALI/ETL certified $62,370 $44,283
ST-4175-11.5 Four post 38,500lbs capacity, 38 ft runway, ALI/ETL certified $66,110 $46,938
41509040 Synchronization set needed to make any Eight Post version of ST 4175 above, brigde part 3' 4" $9,889 $7,021
41509030 Synchronization set needed to make any Eight Post version of ST 4175 above, bridge part 4' 11" $12,078 $8,575
ST-4250-6 Four post 54,000lbs capacity, 20 ft runway, ALI/ETL certified $85,294 $60,559
ST-4250-8 Four post 54,000lbs capacity, 26 ft runway, ALI/ETL certified $90,717 $64,409
ST-4250-9 Four post 54,000lbs capacity, 30 ft runway, ALI/ETL certified $93,434 $66,338
ST-4250-10 Four post 54,000lbs capacity, 33 ft runway, ALI/ETL certified $96,492 $68,509
ST-4250-11.5 Four post 54,000lbs capacity, 38 ft runway, ALI/ETL certified $101,090 $71,774
42509030 Synchronization set needed to make any Eight Post version of ST 4250 above, brigde part 3' 4" $9,889 $7,021
42519040 Synchronization set needed to make any Eight Post version of ST 4250 above, brigde part 4' 11" $12,078 $8,575
All lifts available in 208 to 460VAC, 3-phase, 575V or 1-phase (extra charge)
(See Additional Installation Charges Below)
ACCESSORIES FOR 4-POST LIFTS
Model Number Description List Price STS Price
41229000 Lighting set 15 feet 4 pieces ST4120 $4,176 $2,965
41219000 Lighting set 20 feet 6 pieces ST4120 $4,643 $3,29641219000 Lighting set 20 feet 6 pieces ST4120 $4,643 $3,296
41209000 Lighting set 26 feet 8 pieces ST4120 $5,067 $3,597
41209030 Standard drive on/off ramps, length 38" (2pcs); ST4120 $2,412 $1,712
40599013 Set chemical anchors and shims for ST 4100 $313 $222
41209100 Special 3rd platform for 3 wheel forklift, platform length 49", capacity 2 tons $4,759 $3,379
(not in combination with long drive-on/off ramps)
41209200 Special third platform for 3 wheel forklift, platform length 49", capacity 2 tons $5,290 $3,756
(only in combination with long drive-on/off ramps)
41209010 Long drive on/off ramps, length 58" $4,198 $2,980
43599013 Anchor kit for ST 4055, ST 4070 and ST 4120 $223 $158
Air kit - See accessories for SKYLIFTS
ST4175 and ST4250 Series
42539000 Lighting set 20 feet 208/220V $4,844 $3,439
42539010 Lighting set 20 feet 460/575V $5,438 $3,861
42549000 Lighting set for 26, 30, 33 and 38 feet platforms 208/230V $5,872 $4,169
42549010 Lighting set for 26, 30 and 33 feet platforms 460/575V $6,487 $4,606
42549020 Lighting set for 38 feet platforms 460/575V $6,487 $4,606
42509020 Short drive on/off ramps, length 20" (2pcs) $1,696 $1,204
41599013 Set chemical anchors and shims for ST 4175 $445 $316
42599013 Set chemical anchors and shims for ST 4250 $541 $384
41509010 Set standard drive on/off ramps ST4175, length 44" (2pcs) $2,533 $1,799
42509010 Set standard drive on/off ramps ST4250, length 65" (2pcs) for 33 and 38 foot runways $2,724 $1,934
42519010 Set standard drive on/off ramps, length 55" (2pcs) for 20, 26 and 30 foot runways $2,629 $1,866
42509050 Set fixed drive on/off ramps, length 104" (2pcs) for 33 and 38 foot runways $3,572 $2,536
May 18, 2009 7
42519050 Set fixed drive on/off ramps, length 85" (2pcs) for 20, 26 and 30 foot runways $3,222 $2,288
ACCESSORIES FOR 4-POST LIFTS
Model Number Description List Price STS Price
OPVL09170 Second control box for ST4175 $3,244 $2,303
OPVL09180 Second control box for ST4250 $3,244 $2,303
Air kit - See accessories for SKYLIFTS
HEAVY DUTY SKYLIFT
Model Number Description List Price STS Price
Floor mounted version:
SKY200-7 SM 41322000 SKY 200 - 44,000 lbs (61,000 with symmetrical load distribution), platform length 23' (including standard ramps) $86,306 $61,277
SKY200-8 SM 41323000 SKY 200 - 44,000 lbs (61,000 with symmetrical load distribution), platform length 26' (including standard ramps) $88,352 $62,730
SKY200-9 SM 41324000 SKY 200 - 44,000 lbs (61,000 with symmetrical load distribution), platform length 30' (including standard ramps) $90,618 $64,339
SKY200-10 SM 41325000 SKY 200 - 44,000 lbs (61,000 with symmetrical load distribution), platform length 33' (including standard ramps) $92,774 $65,870
SKY250-8 SM 41303000 SKY 250 - 55,000 lbs (77,000 with symmetrical load distribution), platform length 26' (including standard ramps) $95,194 $67,588
SKY250-9 SM 41304000 SKY 250 - 55,000 lbs (77,000 with symmetrical load distribution), platform length 30' (including standard ramps) $98,076 $69,634
SKY250-10 SM 41305000 SKY 250 - 55,000 lbs (77,000 with symmetrical load distribution), platform length 33' (including standard ramps) $99,517 $70,657
SKY250-12 SM 41306000 SKY 250 - 55,000 lbs (77,000 with symmetrical load distribution), platform length 40' (including standard ramps) $106,249 $75,437
SKY250-14.5 SM 41307000 SKY 250 - 55,000 lbs (77,000 with symmetrical load distribution), platform length 48' (including standard ramps) $114,070 $80,990
Flush mounted version:
SKY200-7 FM 41332000 SKY 200 - 44,000 lbs (61,000 with symmetrical load distribution), platform length 23' $83,380 $59,200
SKY200-8 FM 41333000 SKY 200 - 44,000 lbs (61,000 with symmetrical load distribution), platform length 26' $85,580 $60,762
SKY200-9 FM 41334000 SKY 200 - 44,000 lbs (61,000 with symmetrical load distribution), platform length 30' $87,670 $62,246
SKY200-10 FM 41335000 SKY 200 - 44,000 lbs (61,000 with symmetrical load distribution), platform length 33' $89,870 $63,808SKY200-10 FM 41335000 SKY 200 - 44,000 lbs (61,000 with symmetrical load distribution), platform length 33' $89,870 $63,808
SKY250-8 FM 41313000 SKY 250 - 55,000 lbs (77,000 with symmetrical load distribution), platform length 26' $92,290 $65,526
SKY250-9 FM 41314000 SKY 250 - 55,000 lbs (77,000 with symmetrical load distribution), platform length 30' $95,150 $67,557
SKY250-10 FM 41315000 SKY 250 - 55,000 lbs (77,000 with symmetrical load distribution), platform length 33' $96,580 $68,572
SKY250-12 FM 41316000 SKY 250 - 55,000 lbs (77,000 with symmetrical load distribution), platform length 40' $103,290 $73,336
SKY250-14.5 FM 41317000 SKY 250 - 55,000 lbs (77,000 with symmetrical load distribution), platform length 48' $111,210 $78,959
(See Additional Installation Charges Below)
ACCESSORIES FOR SKYLIFT
Model Number Description List Price STS Price
41300900 Lighting set for SKY 200, 23' (6 pcs), 24V, IP67 $5,099 $3,620
41300910 Lighting set for SKY 200 & SKY 250, 26'/30'/33' (8 pcs), 24V, IP67 $5,385 $3,823
41300920 Lighting set for SKY 250, 40' (10 pcs), 24V, IP67 $5,703 $4,049
41300930 Lighting set for SKY 250, 48' (12 pcs), 24V, IP67 $6,127 $4,350
42509020 Set short, drive-on/off ramps (2 pcs) $1,632 $1,159
41300400 Set fixed, standard, drive-on/off ramps (2pcs), Length 79.2" $3,668 $2,604
41300420 Set fixed, extra long, drive-on/off ramps (2pcs), Length 104.7" $4,622 $3,281
41300940 Platform extension 49.2", (not for 48' version), (2 pcs) $3,954 $2,807
34007930 Remote control with 32' 10" cable $1,208 $858
May 18, 2009 8
34007940 Remote control UL approved with 32' 10" cable $2,353 $1,671
Wash bay model $20,034 $14,224
ACCESSORIES FOR SKYLIFT
Model Number Description List Price STS Price
2 speed lowering, not in combination with synchronisation set $1,840 $1,306
41300950 Synchronisation set for connected versions On request On request
41312950 Set automatic recess coverplates for SKY-FM, 23' (2 pcs) $13,120 $9,315
41313950 Set automatic recess coverplates for SKY-FM, 26' (2 pcs) $16,070 $11,410
41314950 Set automatic recess coverplates for SKY-FM, 30' (2 pcs) $19,020 $13,504
41315950 Set automatic recess coverplates for SKY-FM, 33' (2 pcs) $21,970 $15,599
41316950 Set automatic recess coverplates for SKY-FM, 40' (2 pcs) $27,870 $19,788
OPVLRAL07 Extra price for 1 different colour $1,314 $933
OPVLRAL07-2 Extra price for 2 different colours $2,194 $1,558
41300990 Set chemical anchors and shims for SKYLIFT $678 $482
39509105 Air installation kit for ST 4120, ST 4175, ST 4250 and SKYLIFT; with 11.5' spiral hose (see newsletter 4/17/2009) $108 $77
39509100 Air kit for ST 4120, ST 4175, ST 4250 and SKYLIFT; w/8' air pipe, brackets and one outlet (see letter 4/17/2009) $315 $224
BECKER INGROUND LIFTS
Model Number Description List Price STS Price
HVa 214
2 Rams; plunger piston type; with sliding cover plates (32,000 lbs per ram) HVZ-214 BT-RG On demand On demand
3 Rams; plunger piston type; with sliding cover plates (32,000 lbs per ram) HVD-214 BT-RG On demand On demand3 Rams; plunger piston type; with sliding cover plates (32,000 lbs per ram) HVD-214 BT-RG On demand On demand
HVa 214/190
2 Rams; telescopic piston type; with sliding cover plates (32,000 lbs per ram) HVZ-214/190 BT-RG On demand On demand
3 Rams; telescopic piston type; with sliding cover plates (32,000 lbs per ram) HVD-214/190 BT-RG On demand On demand
Alpha designations for the inground lifts are as follows:
Third letter in model number (a) represents the number of pistons
i.e. HVZ = 2 Ram Lifts HVD = 3 Ram Lifts
Installation: B = Concrete Foundation
Covering: T = Sliding Trench Covers
R = Safety Bar G = Electronic Synchronism Device
(See Additional Installation Charges Below)
ACCESSORIES FOR INGROUNDS
Model Number Description List Price STS Price
HVZ 214 BT-RG-1 Saddle flush mounted head pieces; fix cylinder On demand On demand
HVZ 214 BT-RG-2 Saddle flush mounted head pieces; all cylinders On demand On demand
HVZ 214 BT-RG-3 PHS; Programmable height setting (up to 4 postitions) On demand On demand
HVZ 214 BT-RG-4 AWBP; Automatic wheelbase positioning system On demand On demand
May 18, 2009 9
HVZ 214 BT-RG-5 GPS Ground Position switch w/red/green beacon light On demand On demand
HVZ 214 BT-RG-6 DLS Dual lifting speed (normal/slow) On demand On demand
HVZ 214 BT-RG-7 Frames, wheel pans and covering hot galvanized On demand On demand
ACCESSORIES FOR INGROUNDS
Model Number Description List Price STS Price
HVZ 214 BT-RG-8 Segment plate covering; range of movement: 100 inches On demand On demand
HVZ 214 BT-RG-11 Cylinders lcosit coated On demand On demand
HVZ 214 BT-RG-12 Additional support for passenger cars, painted On demand On demand
HVZ 214 BT-RG-13 Additional support for passenger cars, hot galvanized On demand On demand
HVZ 214 BT-RG-14 Liquid detection system (per ram) On demand On demand
HVZ 214 BT-RG-15 Control Box Pedestal On demand On demand
HVZ 214/190 BT-RG-1 Saddle flush mounted head pieces; fix cylinder On demand On demand
HVZ 214/190 BT-RG-2 Saddle flush mounted head pieces; all cylinders On demand On demand
HVZ 214/190 BT-RG-3 PHS; Programmable height setting (up to 4 postitions) On demand On demand
HVZ 214/190 BT-RG-4 AWBP; Automatic wheelbase positioning system On demand On demand
HVZ 214/190 BT-RG-5 GPS Ground Position switch w/red/green beacon light On demand On demand
HVZ 214/190 BT-RG-6 Liquid detection system (per ram) On demand On demand
HVZ 214/190 BT-RG-7 Suction tube (per ram). Provision of material (coupling) by customer On demand On demand
HVZ 214/190 BT-RG-8 DLS Dual lifting speed (normal/slow) On demand On demand
HVZ 214/190 BT-RG-9 Frames, wheel pans and covering hot galvanized On demand On demand
HVZ 214/190 BT-RG-12 Cassette for fix ram On demand On demand
HVZ 214/190 BT-RG-13 Cassette for fix ram lcosit coated (inside/out) On demand On demand
HVZ 214/190 BT-RG-14 Cassette for movable ram, range of movement 100 inches On demand On demand
HVZ 214/190 BT-RG-16 Cassette for mov. Ram lcosit coated ( inside/out) On demand On demand
HVZ 214/190 BT-RG-17 Cylinders lcosit coated On demand On demand
HVZ 214/190 BT-RG-18 Additional support for passenger cars, painted On demand On demand
HVZ 214/190 BT-RG-19 Additional support for passenger cars, hot galvanized On demand On demandHVZ 214/190 BT-RG-19 Additional support for passenger cars, hot galvanized On demand On demand
HVZ 214/190 BT-RG-21 Control Box Pedestal On demand On demand
HVD 214 BT-RG-1 Saddle flush mounted head pieces; fix cylinder On demand On demand
HVD 214 BT-RG-2 Saddle flush mounted head pieces; all cylinders On demand On demand
HVD 214 BT-RG-3 PHS; Programmable height setting (up to 4 postitions) On demand On demand
HVD 214 BT-RG-4 AWBP; Automatic wheelbase positioning system On demand On demand
HVD 214 BT-RG-5 GPS Ground Position switch w/red/green beacon light On demand On demand
HVD 214 BT-RG-6 Speed control (normal/slow speed) On demand On demand
HVD 214 BT-RG-7 Frames, wheel pans and covering hot galvanized On demand On demand
HVD 214 BT-RG-8 Segment plate covering; range of movement: 100 inches On demand On demand
HVD 214 BT-RG-11 Cylinders lcosit coated On demand On demand
HVD 214 BT-RG-12 Additional support for passenger cars, painted On demand On demand
HVD 214 BT-RG-13 Additional support for passenger cars, hot galvanized On demand On demand
HVD 214 BT-RG-14 Liquid detection system (per ram) On demand On demand
HVD 214 BT-RG-15 Control Box Pedestal On demand On demand
HVD 214/190 BT-RG-1 Saddle flush mounted head pieces; fix cylinder On demand On demand
HVD 214/190 BT-RG-2 Saddle flush mounted head pieces; all cylinders On demand On demand
HVD 214/190 BT-RG-3 PHS; Programmable height setting (up to 4 postitions) On demand On demand
HVD 214/190 BT-RG-4 AWBP; Automatic wheelbase positioning system On demand On demand
HVD 214/190 BT-RG-5 GPS Ground Position switch w/red/green beacon light On demand On demand
HVD 214/190 BT-RG-6 Liquid detection system (per ram) On demand On demand
HVD 214/190 BT-RG-7 Suction tube (per ram). Provision of material (coupling) by customer On demand On demand
HVD 214/190 BT-RG-8 Speed control (normal/slow speed) On demand On demand
May 18, 2009 10
HVD 214/190 BT-RG-9 Frames, wheel pans and covering hot galvanized On demand On demand
HVD 214/190 BT-RG-12 Cassette for fix ram On demand On demand
HVD 214/190 BT-RG-13 Cassette for fix ram lcosit coated(inside/out) On demand On demand
ACCESSORIES FOR INGROUNDS
Model Number Description List Price STS Price
HVD 214/190 BT-RG-14 Cassette for movable ram, range of movement 100 inches On demand On demand
HVD 214/190 BT-RG-15 Segment plate covering; range of movement: 100 inches On demand On demand
HVD 214/190 BT-RG-16 Cassette for mov. Ram lcosit coated On demand On demand
HVD 214/190 BT-RG-17 Cylinders lcosit coated On demand On demand
HVD 214/190 BT-RG-18 Additional support for passenger cars, painted On demand On demand
HVD 214/190 BT-RG-19 Additional support for passenger cars, hot galvanized On demand On demand
HVD 214/190 BT-RG-20 Control Box Pedestal On demand On demand
ECO LIFTS
Model Number Description List Price STS Price
ECO 60-10 60,000 lbs capacity with 10 ft. (120'') travel range $116,665 $82,832
ECO 60-13 60,000 lbs capacity with 13 ft. (156'') travel range $120,960 $85,882
ECO 60-17 60,000 lbs capacity with 17 ft. (204'') travel range $126,350 $89,709
ECO 90-3 90,000 lbs capacity, 1 fixed & 2 movable mechanism, (Price based on 10 ft travel front pit and 10 ft travel rear pit) $182,870 $129,838
ECO 90-3 2F 90,000 lbs capacity, 2 fixed and 1 movable mechanism, (Price based on 10 ft travel for movable mechanism) On demand On demand
(See Additional Installation Charges Below)
ECOLIFT ACCESSORIESECOLIFT ACCESSORIES
Model Number Description List Price STS Price
P60 Optional remote pendant for ECO 60, when ordered with the lift $2,200 $1,562
Note: Incl. pendant, 30 ft cable, intrinsically safe barriers, hard-wired.
P60D Optional detachable remote pendant for ECO 60, when ordered with the lift $4,049 $2,875
Note: Incl. pendant, 30 ft cable, intrinsically safe barriers, connectors, hard-wired.
P60R Replacement pendant, including 30 ft cable (Does not include intrinsically safe barriers) $2,965 $2,105
P60RD Replacement detachable remote pendant for ECO 60 $4,785 $3,397
EL13 Increase box length from 10 ft. to 13 ft (156'') in travel range $4,350 $3,089
EL17 Increase box length from 10 ft. to 17 ft (204'') in travel range $9,715 $6,898
P90 Optional remote pendant for ECO 90, when ordered with the lift $3,050 $2,166
Note: Incl. pendant, 30 ft cable, intrinsically safe barriers, hard-wired.
P90D Optional detachable remote pendant for ECO 90, when ordered with the lift $4,588 $3,257
Note: Incl. pendant, 30 ft cable, intrinsically safe barriers, connectors, hard-wired.
P90R Replacement pendant, including 30 ft cable (Does not include intrinsically safe barriers) $3,770 $2,677
P90RD Replacement detachable remote pendant for ECO 90 $5,423 $3,850
Standard Adapter package included with lift:
Standard with lift: (2) 4" risers, (2) 6" risers, (2) cradles, (2) short spade, (2) tall spade-normal width (2) flat tops.
Optional Adaptors:
508-06-122 Adapter 4" extension, price each $308 $219
508-08-122 Adapter 6" extension, price each $314 $223
May 18, 2009 11
508-16-122 Adapter cradle, price each $179 $127
508-21-122 Adapter vertical axle 9 x 3.7", price each $342 $243
508-25-122 Adapter low vertical 4 x 3.7", price each $324 $230
508-31-122 Adapter flat top block, price each $307 $218
ECOLIFT ACCESSORIES
Model Number Description List Price STS Price
508-09-222 Adapter tall vertical 9 x 3.7", price each $345 $245
508-10-110 Adapter SP Dart, price each $332 $236
508-10-122 Adapter 7" extension, price each $408 $290
508-15-120 Adapter adjustable top, price each $415 $295
508-17-122 Adapter 10" wide cradle, price each $474 $337
508-17-132 Adapter flat accessory (use with 508-17-122), price each $550 $391
508-17-142 Adapter "H" accessory (use with 508-17-122), price each $600 $426
508-18-122 Adapter swivel cradle, price each $195 $138
508-19-122 Adapter 10" wide cradle sideways, price each $478 $339
508-23-122 Adapter vertical wider axle 9 x 7.7", price each $457 $324
508-24-122 Adapter vertical wide axle 9 x 6.2", price each $457 $324
508--27-122 Adapter Front Orion 5.5 x 3.7", price each $324 $230
508-33-122 Adapter crown top block, price each $311 $221
508-35-122 Adapter slant top block, price each $374 $266
508-45-110 Adapter Rear Transit, price each $415 $295
508-15-252 Adapter wide 14 x 11.77", price each $664 $471
Standard Cover Plates included with lift:
Standard with lift: front extruded aluminum (hinged), front drop-in aluminum (2), rear drop-in aluminum (2),
23.5" extended rear cover plate (1), front box end section covers (2).23.5" extended rear cover plate (1), front box end section covers (2).
Optional Cover Plates for continuous pit:
814-01-1XX 12" - 18" cover plate, price each $717 $509
814-01-2XX 23" - 29.75" cover plate, price each $936 $665
814-01-3XX 30.5" - 34.25" cover plate, price each $1,107 $786
813-03-322 Additional bridge bracket, price each $964 $684
Replacement drop-in aluminum diamond plate covers:
2004-14-222 Front cover, price each $751 $533
0413-01-222 Rear cover, price each $841 $597
Replacement Extruded aluminum front cover (hinged), price each $195 $138
575 Voltage Additional charge for 575V. 3 phase, 13 amp. $1,665 $1,182
Narrow console Additional charge for narrow controle console 40" wide x 15.5" deep x 68.5" tall $1,404 $997
Wallmount console Additional charge for wallmount console for pedestal or bracket mounting $2,807 $1,993
Shims (Must be ordered with the lift to ship with lift):
FS1 0.063" thickness, price each $6.10 $4
FS2 0.125" thickness, price each $6.80 $5
FS4 0.250" thickness, price each $8.10 $6
FS8 0.500" thickness, price each $10.80 $8
Hose Add. field installed hydraulic hose over standard length provided (see ECO order form), price per linear ft per hose $10.90 $8
May 18, 2009 12
JACKING BEAMS FOR HEAVY DUTY FOUR POST, SKY AND PARALLELOGRAM LIFTS
Model Number Description List Price STS Price
39614100 FL70 - 14,000lbs jacking beam for model ST4100 all lengths $8,252 $5,859
39614300 FL70 - 14,000lbs jacking beam for model VEGA 120 Lower Rail $8,252 $5,859
39614400 FL70 - 14,000lbs jacking beam for model VEGA 120 Upper Rail $8,252 $5,859
39617100 FL80 - 17,800lbs jacking beam for model ST4120 all lengths $8,252 $5,859
JACKING BEAMS FOR HEAVY DUTY FOUR POST, SKY AND PARALLELOGRAM LIFTS
Model Number Description List Price STS Price
39615100 FL120 - 26,400lbs jacking beam for model ST4175 $8,252 $5,859
39615300 FL120 - 26,400lbs jacking beam for model VEGA 180 Lower Rail $8,252 $5,859
39615400 FL120 - 26,400lbs jacking beam for model VEGA 180 Upper Rail $8,252 $5,859
39615500 FL120 - 35,200lbs jacking beam for model SKY 200 & 250 $8,252 $5,859
39616100 FL160 - 35,200lbs jacking beam for model ST4250 - 6, 8 & 9 mtr platforms $9,158 $6,502
39616200 FL160 - 35,200lbs jacking beam for model ST4250 - 10 & 11.5 mtr platforms $9,158 $6,502
39616300 FL160 - 35,200lbs jacking beam for model VEGA 240 Lower Rail $9,158 $6,502
39616400 FL160 - 35,200lbs jacking beam for model VEGA 240 Upper Rail $9,158 $6,502
39616500 FL160 - 35,200lbs jacking beam for model SKY 250 $9,158 $6,502
39617300 FL200 - 44,000lbs jacking beam for model VEGA340, 450, 520 Lower Rail $9,158 $6,502
39617400 FL200 - 44,000lbs jacking beam for model VEGA 340, 450, 520 Upper Rail $9,158 $6,502
39615180 Diff.beam for FL70 - FL200 to lift with both rams at one point $689 $489
39615190 U-saddle, large model, for FL70 - FL200 (2 pieces needed) $196 $139
39991000 TRT - Twin Ram Trolley for FL70 - FL200 $594 $421
42529200 Spiral airtube for ST4175 and ST4250 $625 $444
On request Adjustable crossbeam adapter (10-84 mm), capacity 26,400 lbs $1,484 $1,054
4311.70.91.00 Air-cleaning / greasing / reducing unit for jacking beams $721 $512
PARALLELOGRAM LIFTS
Model Number Description List Price STS Price
VEGA 240 SERIES H.= 73"
VEGA 240/50-CB-26-FM - Drive Off 50,000lbs capacity, 26 foot runway, continuous base, ALI/ETL certified (flush mount) $91,000 $64,610
VEGA 240/50-CB-26-N - Drive Off 50,000lbs capacity, 26 foot runway, continuous base, ALI/ETL certified (surface mount) $92,150 $65,427
VEGA 240/50-CB-26-FM - Drive Thru 50,000lbs capacity, 26 foot runway, continuous base, ALI/ETL certified (flush mount) $91,100 $64,681
VEGA 240/50-CB-26-N - Drive Thru 50,000lbs capacity, 26 foot runway, continuous base, ALI/ETL certified (surface mount) $94,350 $66,989
VEGA 240/50-OF-26-FM - Drive Thru 50,000lbs capacity, 26 foot runway, open floor, ALI/ETL certified (flush mount) $94,400 $67,024
VEGA 240/50-OF-26-N - Drive Off 50,000lbs capacity, 26 foot runway, open floor, ALI/ETL certified (surface mount) $95,400 $67,734
VEGA 240/50-CB-28-FM - Drive Off 50,000lbs capacity, 28 foot runway, continuous base, ALI/ETL certified (flush mount) $93,100 $66,101
May 18, 2009 13
VEGA 240/50-CB-28-N - Drive Off 50,000lbs capacity, 28 foot runway, continuous base, ALI/ETL certified (surface mount) $94,300 $66,953
VEGA 240/50-CB-28-FM - Drive Thru 50,000lbs capacity, 28 foot runway, continuous base, ALI/ETL certified (flush mount) $93,300 $66,243
VEGA 240/50-CB-28-N - Drive Thru 50,000lbs capacity, 28 foot runway, continuous base, ALI/ETL certified (surface mount) $96,600 $68,586
PARALLELOGRAM LIFTS
Model Number Description List Price STS Price
VEGA 240/50-CB-32-FM Drive Off 50,000lbs capacity, 32 foot runway, continuous base, ALI/ETL certified (flush mount) $106,800 $75,828
VEGA 240/50-CB-32-N - Drive Off 50,000lbs capacity, 32 foot runway, continuous base, ALI/ETL certified (surface mount) $108,050 $76,716
VEGA 240/50-CB-32-FM - Drive Thru 50,000lbs capacity, 32 foot runway, continuous base, ALI/ETL certified (flush mount) $107,150 $76,077
VEGA 240/50-CB-32-N - Drive Thru 50,000lbs capacity, 32 foot runway, continuous base, ALI/ETL certified (surface mount) $110,500 $78,455
VEGA 240/50-OF-32-FM - Drive Thru 50,000lbs capacity, 32 foot runway, open floor, ALI/ETL certified (flush mount) $110,400 $78,384
VEGA 240/50-OF-32-N - Drive Off 50,000lbs capacity, 32 foot runway, open floor, ALI/ETL certified (surface mount) $111,400 $79,094
VEGA 240/50-CB-35-FM - Drive Off 50,000lbs capacity, 35 foot runway, continuous base, ALI/ETL certified (flush mount) $110,550 $78,491
VEGA 240/50-CB-35-N - Drive Off 50,000lbs capacity, 35 foot runway, continuous base, ALI/ETL certified (surface mount) $111,650 $79,272
VEGA 240/50-CB-35-FM - Drive Thru 50,000lbs capacity, 35 foot runway, continuous base, ALI/ETL certified (flush mount) $110,750 $78,633
VEGA 240/50-CB-35-N - Drive Thru 50,000lbs capacity, 35 foot runway, continuous base, ALI/ETL certified (surface mount) $114,050 $80,976
VEGA 240/50-OF-35-FM - Drive Thru 50,000lbs capacity, 35 foot runway, open floor, ALI/ETL certified (flush mount) $113,900 $80,869
VEGA 240/50-OF-35-N - Drive Off 50,000lbs capacity, 35 foot runway, open floor, ALI/ETL certified (surface mount) $114,950 $81,615
PARALLELOGRAM LIFTS
Model Number Description List Price STS Price
VEGA 240 SERIES H.= 73"
VEGA 240/50-CB-48-FM - Drive Thru 50,000lbs capacity, 48 foot runway, continuous, ALI/ETL certified (flush mount) $140,100 $99,471
VEGA 240/50-CB-48-N - Drive Off 50,000lbs capacity, 48 foot runway, continuous base, ALI/ETL certified (surface mount) $141,200 $100,252
VEGA 240/50-OF-48-FM - Drive Thru 50,000lbs capacity, 48 foot runway, open floor, ALI/ETL certified (flush mount) $147,300 $104,583
VEGA 240/50-OF-48-N - Drive Off 50,000lbs capacity, 48 foot runway, open floor, ALI/ETL certified (surface mount) $148,200 $105,222VEGA 240/50-OF-48-N - Drive Off 50,000lbs capacity, 48 foot runway, open floor, ALI/ETL certified (surface mount) $148,200 $105,222
VEGA 340 SERIES H.= 73"
VEGA 340/75-CB-30-FM - Drive Off 75,000lbs capacity, 30 foot runway, continuous base, ALI/ETL certified (flush mount) $116,900 $82,999
VEGA 340/75-CB-30-N - Drive Off 75,000lbs capacity, 30 foot runway, continuous base, ALI/ETL certified (surface mount) $118,200 $83,922
VEGA 340/75-CB-30-FM - Drive Thru 75,000lbs capacity, 30 foot runway, continuous base, ALI/ETL certified (flush mount) $117,100 $83,141
VEGA 340/75-CB-30-N - Drive Thru 75,000lbs capacity, 30 foot runway, continuous base, ALI/ETL certified (surface mount) $120,700 $85,697
VEGA 340/75-OF-30-FM - Drive Thru 75,000lbs capacity, 30 foot runway, open floor, ALI/ETL certified (flush mount) $120,900 $85,839
VEGA 340/75-OF-30-N - Drive Off 75,000lbs capacity, 30 foot runway, open floor, ALI/ETL certified (surface mount) $122,100 $86,691
VEGA 340/75-CB-50-FM - Drive Thru 75,000lbs capacity, 50 foot runway, continuous base, 5 + 5 legs, ALI/ETL certified (flush mount) $149,700 $106,287
VEGA 340/75-CB-50-N - Drive Off 75,000lbs capacity, 50 foot runway, continuous base, 5 + 5 legs, ALI/ETL certified (surface mount) $151,100 $107,281
VEGA 340/75-OF-50-FM - Drive Thru 75,000lbs capacity, 50 foot runway, continuous base, 5 + 5 legs, ALI/ETL certified (flush mount) $156,100 $110,831
VEGA 340/75-OF-50-N - Drive Off 75,000lbs capacity, 50 foot runway, continuous base, 5 + 5 legs, ALI/ETL certified (surface mount) $157,800 $112,038
VEGA 450 SERIES H.= 73"
VEGA 450/99-CB-42-FM - Drive Off 99,000lbs capacity, 42 foot runway, continuous base, ALI/ETL certified (flush mount) $148,800 $105,648
VEGA 450/99-CB-42-N - Drive Off 99,000lbs capacity, 42 foot runway, continuous base, ALI/ETL certified (surface mount) $150,100 $106,571
VEGA 450/99-CB-42-FM - Drive Thru 99,000lbs capacity, 42 foot runway, continuous base, ALI/ETL certified (flush mount) $149,100 $105,861
VEGA 450/99-CB-42-N - Drive Thru 99,000lbs capacity, 42 foot runway, continuous base, ALI/ETL certified (surface mount) $152,600 $108,346
VEGA 450/99-OF-42-FM - Drive Thru 99,000lbs capacity, 42 foot runway, open floor, ALI/ETL certified (flush mount) $156,000 $110,760
VEGA 450/99-OF-42-N - Drive Off 99,000lbs capacity, 42 foot runway, open floor, ALI/ETL certified (surface mount) $155,900 $110,689
VEGA 450/99-CB-50-FM - Drive Off 99,000lbs capacity, 50 foot runway, continuous base, ALI/ETL certified (flush mount) $178,100 $126,451
VEGA 450/99-CB-50-N - Drive Off 99,000lbs capacity, 50 foot runway, continuous base, ALI/ETL certified (surface mount) $179,000 $127,090
May 18, 2009 14
VEGA 450/99-CB-50-FM - Drive Thru 99,000lbs capacity, 50 foot runway, continuous base, ALI/ETL certified (flush mount) $178,200 $126,522
VEGA 450/99-CB-50-N - Drive Thru 99,000lbs capacity, 50 foot runway, continuous base, ALI/ETL certified (surface mount) $181,600 $128,936
VEGA 450/99-OF-50-FM - Drive Thru 99,000lbs capacity, 50 foot runway, open floor, ALI/ETL certified (flush mount) $186,900 $132,699
VEGA 450/99-OF-50-N - Drive Off 99,000lbs capacity, 50 foot runway, open floor, ALI/ETL certified (surface mount) $187,900 $133,409
(See Additional Installation Charges Below)
ACCESSORIES FOR PARALLELOGRAM LIFTS
Model Number Description List Price STS Price
Open Floor Extra Cost:
VEGA 240/50-OF VEGA 240/50-OF (up to L. 35') $4,400 $3,124
VEGA 340/75-OF VEGA 340/75-OF (up to L. 35') $5,050 $3,586
VEGA 450/99-OF-42 VEGA 450/99-OF-42 $8,300 $5,893
59.350.218 VEGA 240/50 & 340/75 L. = 50' $8,850 $6,284
VEGA 450/99-OF-50 VEGA 450/99-OF-50 $10,350 $7,349
Extended Width:
59.350.211 45" Inner Runway Spacing $3,177 $2,256
ACCESSORIES FOR PARALLELOGRAM LIFTS
Model Number Description List Price STS Price
Extended Height:
59.350.213 Vega 180 - Vega 240 & Vega 340 - 77" Extended height $1,190 $845
59.350.214 Vega 450 & Vega 520 - 77" Extended height $1,410 $1,001
Enlarged Runways Width:Enlarged Runways Width:
59.350.215 Enlarged Runways Width Vega 240 - P.W.=32" $1,050 $746
Enlarged Runways Width Vega 340 - P.W.=32" $1,260 $895
Enlarged Runways Width Vega 340 & 450 . 50' - P.W.=32" $2,100 $1,491
Front Recess for Turn Plates
Vega 240 Runways Front Recess for Turn Plates $3,689 $2,619
Vega 340 Runways Front Recess for Turn Plates $3,689 $2,619
59-340-240 Vega 240 & Vega 340 Inner Safety Rails. (Complete Set) $5,844 $4,149
59-340-245 Vega 450 & Vega 520 Inner Safety Rails.(Complete Set) $6,074 $4,313
59.340.260 Vega 240 & Vega 340 Stainless Steel Inner Safety Rails.(Complete Set) $6,384 $4,533
59.340.270 Vega 450 & Vega 520 Stainless Steel Inner Safety Rails.(Complete Set) $6,888 $4,891
Vega 240 & Vega 340 Extra cost for Stainless Steel Outer Safety Rails $1,070 $760
Vega 450 & Vega 520 Extra cost for Stainless Steel Outer Safety Rails $1,620 $1,150
59.350.217 No Torsion Bar option for Vega Lift $12,030 $8,541
59.340.250 Rolling Oil Drain Pan, 25 gallon capacity $635 $451
59-360.150 24 Volt Lighting for Vega 180, 240 & 340 (8 Lamps Kit). $3,518 $2,498
59-370-150 24 Volt Lighting for Vega 450 & Vega 520 (10 Lamps Kit) $4,408 $3,129
59-340-175 Zinc Coated & Waterproof Control Panel Cover for Vega Lifts $604 $429
May 18, 2009 15
59-340-204 VEGA 240 L.= 26' - Zinc coating (Hot Galvanized). Flush Mount & Surface Mount Drive Off. $14,023 $9,956
59-340-205 VEGA 240 L.= 26' - Zinc coating (Hot Galvanized). Surface Mount Drive Through. $15,040 $10,679
59-340-206 VEGA 240 L.= 32' - Zinc coating (Hot Galvanized). Flush Mount & Surface Mount Drive Off. $17,188 $12,203
59-340-207 VEGA 240 L.= 32' - Zinc coating (Hot Galvanized). Surface Mount Drive Through. $18,393 $13,059
59-340-208 VEGA 240 L.= 35' - Zinc coating (Hot Galvanized). Flush Mount & Surface Mount Drive Off. $18,879 $13,404
59-340-209 VEGA 240 L.= 35' - Zinc coating (Hot Galvanized). Surface Mount Drive Through. $20,132 $14,294
ACCESSORIES FOR PARALLELOGRAM LIFTS
Model Number Description List Price STS Price
59-340-210 VEGA 340 L.= 30' - Zinc coating (Hot Galvanized). Flush Mount & Surface Mount Drive Off. $16,341 $11,602
59-340-211 VEGA 340 L.= 30' - Zinc coating (Hot Galvanized). Surface Mount Drive Through. $17,375 $12,336
VEGA 340 L.= 48' - Zinc coating (Hot Galvanized). Surface Mount Drive Through. $26,345 $18,705
59-340-212 VEGA 450 L.= 42' - Zinc coating (Hot Galvanized). Flush Mount & Surface Mount Drive Off. $22,483 $15,963
59-340-213 VEGA 450 L.= 42' - Zinc coating (Hot Galvanized). Surface Mount Drive Through. $23,250 $16,507
VEGA 340/450 L.= 50' - Zinc coating (Hot Galvanized). Flush Mount & Surface Mount Drive Off. $26,800 $19,028
VEGA 340/450 L.= 50' - Zinc coating (Hot Galvanized). Surface Mount Drive Through. $27,800 $19,738
Extended Access Ramps Extra Cost:
59-350-220 Vega 240 Low Profile Ramps L.=120". (set of 2) $1,549 $1,100
59-350-221 Vega 340 - Vega 450 & Vega 520 Low Profile Ramps L.=120". (set of 2) $1,549 $1,100
ACCESSORIES FOR PARALLELOGRAM LIFTS
Model Number Description List Price STS Price
59-350-223 Vega 240 Low Profile Ramps L.=138". (set of 2) $1,786 $1,268
59-350-224 Vega 340 - Vega 450 & Vega 520 Low Profile Ramps L.=138". (set of 2) $1,786 $1,26859-350-224 Vega 340 - Vega 450 & Vega 520 Low Profile Ramps L.=138". (set of 2) $1,786 $1,268
Vega 240 Low Profile Ramps L.=177". (Set of 2) $2,822 $2,003
Vega 340 - Vega 450 & Vega 520 Low Profile Ramps L.=177". (Set of 2) $2,822 $2,003
59-340-215 Auto pit cover plates (flush mount units) Vega 120/180/240/340/450/520 $5,954 $4,228
Hot Galvanized Automatic Pit Cover Plate Kit for Vega 340 $10,089 $7,163
Base Plate Stainless Steel Base Plate for Continuous Base Lifts $397 $282
Oil Pipes & Fittings Stainless Steel Oil Pipes & Oil Fittings up to 32' Platform length $2,507 $1,780
Oil Pipes & Fittings L. 50' Stainless Steel Oil Pipes & Oil Fittings up to 50' Platform length $3,950 $2,805
Stainless Steel Screws Structural 10.9 grade Screws Set for VEGA 340/75 with 10 Legs $3,900 $2,769
Stainless Steel Pins Pivot Pins Set for VEGA 340/75 & VEGA 450/99 with 10 Legs $4,820 $3,422
59-350-225 600Vac. Motor for Vega Lifts $735 $522
Remote Control Hand Held Key Board $1,984 $1,409
Lift Height Control Height Limit Microswitch $418 $297
119901 Anti-skid paint, 5 gallon $952 $676
59-350-227 Internal Air Kit (Set of 4 Air Fittings for Runways) $953 $676
59-350-228 Audible descent alarm $220 $156
Control Panel for VEGA lifts NEMA 4 x $1,490 $1,058
Alignment turn plate cut-out for Vega 180. Must reinforce runways. Both runways included. $3,400 $2,414
Alignment turn plate cut-out for Vega 240 & 340. Reinforment of runways not needed. Both runways included. $1,621 $1,151
May 18, 2009 16
ACCESSORIES FOR ALL PLATFORM LIFTS
Model Number Description List Price STS Price
66701104 Anti-skid alum. diamond plate 15 3/4" x 49 1/5", 30' length platform lift requires a total of 14 plates, (Price per plate) $229 $163
66701106 Anti-skid alum. diamond plate 23 3/5" x 49 1/5", 30' length platform lift requires a total of 14 plates, (Price per plate) $271 $192
61001022 Cleaner/assembly set for anti-skid aluminum diamond plate $214 $152
AIR HYDRAULIC PIT JACKS
Model Number Description List Price STS Price
GD100 11T Complete pit jack including cradle $9,667 $6,864
GD150 16.5T Complete pit jack including cradle $11,045 $7,842
GD200 22T Complete pit jack including cradle $11,980 $8,506
ACCESSORIES:
58-100-00 16.5T Cross beam adapter (T150), adjustable from 6.9" to 30" $1,749 $1,242
90-716-00 22T 9.8" extension (FG 250) $297 $211
90-718-00 22T Integrated safety stand (S200) $1,188 $843
90-717-00 5.7" saddle (SB) with hole for oil plug $234 $166
HYDRAULIC TRANSMISSION JACK
Model Number Description List Price STS Price
VL10 2200 lbs. Vertical lift with AS-2 $1,393 $989VL10 2200 lbs. Vertical lift with AS-2 $1,393 $989
VLT12 2600 lbs. Vertical telescopic lift with AS-2 $3,784 $2,687
ACCESSORIES:
90-588-00 600 lbs. Adjustable saddle (AS-1) $470 $334
90-596-00 1650 lbs. Adjustable saddle (AS-2) $1,140 $809
HYDRAULIC WHEEL TROLLEYS
Model Number Description List Price STS Price
WT500 .6T For wheel diameter 31.5" - 55" $3,487 $2,476
WT1000 1.1T For wheel diameter more than 39.4" $5,077 $3,605
JACK STANDS
Model Number Description List Price STS Price
5000N 5.0T 5 Positions - 15" / 23.5" $199 $141
7500N 7.5T 6 Positions - 26"/ 40" $412 $293
7500NL 7.5T 3 Positions, low model - 11.5 / 17" $349 $248
May 18, 2009 17
“Raising Your Profits”
OHIO DAS STSLIFT INSTALLATION SCHEDULE OF VALUES
Section: Scope of Work
Lift Control Conduits: 35 ft. of underground air/hydraulic chase and electrical control conduit from the lift to the control panel where a recess mount is specified.
Material Handling: Forklifts or mobile cranes to off-load and set lifts in place.
Lift Installation: Anchors, oil, electrical, air, and miscellaneous materials and labor for a certified professionally installed lift
.Project Management: Coordination with the owner, site, construction, contractor, training, and
documentation.
Lift Control Conduits ProjectStyle (When Specified) Material Handling Lift Installation Management
2-Post 1,925 1,444 3,879
4-Post 1,925 1,444 3,879 1,325
Parallelogram 1,925 1,444 4,350 1,650
Skylift 1,925 1,444 4,100 1,650
Mobile Columns(Set of Four)
600
200 Log Canoe CircleStevensville, MD 21666Phone: 410.643.9001Fax: 410.643.8901E-Mail: [email protected]
MODEL DESCRIPTION STS PRICE INSTALLATION ELECTRICAL AIR CONDUIT SUMP CONSTRUCTION HANDLING FREIGHT INSTALL PM
ECO60-10 60,000# CAPACITY WITH 10' (120") TRAVEL RANGE - ONE FIXED & ONE MOVABLE UNIT IN TWO PITS 82,832.15$ 43,250.00$ 2,500.00$ 1,000.00$ 1,000.00$ 750.00$ 25,000.00$ 1,000.00$ 2,000.00$ 7,000.00$ 3,000.00$
ECO60-13 60,000# CAPACITY WITH 13' (156") TRAVEL RANGE - ONE FIXED & ONE MOVABLE UNIT IN TWO PITS 85,881.60$ 51,750.00$ 2,500.00$ 1,000.00$ 1,000.00$ 750.00$ 32,500.00$ 1,000.00$ 2,000.00$ 8,000.00$ 3,000.00$
ECO60-17 60,000# CAPACITY WITH 17' (204") TRAVEL RANGE - ONE FIXED & ONE MOVABLE UNIT IN TWO PITS 89,708.50$ 64,750.00$ 2,500.00$ 1,000.00$ 1,000.00$ 750.00$ 42,500.00$ 1,000.00$ 2,000.00$ 11,000.00$ 3,000.00$
ECO60-10 SINGLE PIT 60,000# CAPACITY WITH 10' (120") TRAVEL RANGE - ONE FIXED & ONE MOVABLE UNIT IN ONE PIT 86,461.67$ 42,250.00$ 2,500.00$ 1,000.00$ 1,000.00$ 750.00$ 24,000.00$ 1,000.00$ 2,000.00$ 7,000.00$ 3,000.00$
ECO60-13 SINGLE PIT 60,000# CAPACITY WITH 13' (156") TRAVEL RANGE - ONE FIXED & ONE MOVABLE UNIT IN ONE PIT 88,514.28$ 50,750.00$ 2,500.00$ 1,000.00$ 1,000.00$ 750.00$ 31,500.00$ 1,000.00$ 2,000.00$ 8,000.00$ 3,000.00$
ECO60-17 SINGLE PIT 60,000# CAPACITY WITH 17' (204") TRAVEL RANGE - ONE FIXED & ONE MOVABLE UNIT IN ONE PIT 90,726.64$ 63,750.00$ 2,500.00$ 1,000.00$ 1,000.00$ 750.00$ 41,500.00$ 1,000.00$ 2,000.00$ 11,000.00$ 3,000.00$
ECO90-3 90,000# CAPACITY WITH TWO 10' (120") TRAVEL RANGES - ONE FIXED & TWO MOVABLE UNITS IN THREE PITS 129,838.00$ 72,000.00$ 2,500.00$ 1,000.00$ 1,500.00$ 1,500.00$ 44,500.00$ 2,000.00$ 3,000.00$ 11,000.00$ 5,000.00$
ECO90-3 EL13 90,000# CAPACITY WITH TWO 13' (156") TRAVEL RANGES - ONE FIXED & TWO MOVABLE UNITS IN THREE PITS 136,014.70$ 88,250.00$ 2,500.00$ 1,000.00$ 1,500.00$ 1,500.00$ 58,750.00$ 2,000.00$ 3,000.00$ 13,000.00$ 5,000.00$
ECO90-3 EL17 90,000# CAPACITY WITH TWO 17' (204") TRAVEL RANGES - ONE FIXED & TWO MOVABLE UNITS IN THREE PITS 143,633.00$ 111,500.00$ 2,500.00$ 1,000.00$ 1,500.00$ 1,500.00$ 78,000.00$ 2,000.00$ 3,000.00$ 17,000.00$ 5,000.00$
ECO90-3 DFM EL10 90,000# CAPACITY WITH TWO FIXED & ONE MOVABLE 10' (120") TRAVEL RANGE UNITS IN TWO PITS On Demand 55,000.00$ 2,500.00$ 1,000.00$ 1,000.00$ 1,500.00$ 28,000.00$ 2,000.00$ 3,000.00$ 11,000.00$ 5,000.00$
ECO90-3 DFM EL13 90,000# CAPACITY WITH TWO FIXED & ONE MOVABLE 13' (156") TRAVEL RANGE UNITS IN TWO PITS On Demand 65,000.00$ 2,500.00$ 1,000.00$ 1,000.00$ 1,500.00$ 36,000.00$ 2,000.00$ 3,000.00$ 13,000.00$ 5,000.00$
ECO90-3 DFM EL17 90,000# CAPACITY WITH TWO FIXED & ONE MOVABLE 17' (204") TRAVEL RANGE UNITS IN TWO PITS On Demand 79,000.00$ 2,500.00$ 1,000.00$ 1,000.00$ 1,500.00$ 46,000.00$ 2,000.00$ 3,000.00$ 17,000.00$ 5,000.00$
OPTIONS
P60 REMOTE PENDANT INCLUDING PENDANT, 30 FT. CABLE, DIN CONNECTOR, PREWIRED (WHEN ORDERED W/LIFT) 1,562.00$
P90 REMOTE PENDANT INCLUDING PENDANT, 30 FT. CABLE, DIN CONNECTOR, PREWIRED (WHEN ORDERED W/LIFT) 2,166.00$
LIQUID DETECTION KIT MECHANICAL FLOAT SYSTEM FOR DETECTING FLUIDS IN SUMP 284.00$
SUMP PUMP AIR DIAPHRAM PUMP FOR MANUAL PIT DRAINAGE 1,509.00$
508-17-142 ADAPTERS TWO HENDRICKSON SUSPENION INSERT ADAPTERS 852.00$
ADAPTER STAND 358.00$
SCOPE OF WORK
ELECTRICAL 100 FT. OF 3-PHASE POWER WIRING, CONNECTION DEVICES, DISCONNECT, AND ELECTRICAL PANEL BREAKER
AIR PIPING 25 FT. OF RIGID AIR PIPING, SHUT OFF, & CONSOLE MOUNTED COMBINATION AIR REGULATOR,FILTER, AUTO DRAIN
LIFT CONTROL CONDUITS 100 FT. OF AIR/HYDRAULIC CHASE FROM CONTROL CONSOLE TO FIXED AND MOVABLE LIFT
SUMP PIT ONE SUMP PIT AND ONE DRAIN (SUMP PUMP/ TRAP/EXTERNAL DRAINAGE NOT INCLUDED)
CONSTRUCTION SAW CUTTING, DEMOLITION, AND EXCAVATING, CONCRETING, FINISHING
MATERIAL HANDLING FORK LIFTS OR MOBILE CRANES TO OFF LOAD AND SET LIFTS IN PERMANENT LOCATION
MATERIAL AND LABOR ANCHORS, OIL, ELECTRICAL, AIR, AND MISC. MATERIALS AND LABOR FOR A PROFESSIONAL INSTALLED LIFT SYSTEM
PROJECT MANAGEMENT COORDINATION WITH OWNER, SITE, CONSTRUCTION, CONTRACTORS, TRAINING, AND DOCUMENTATION
FREIGHT SHIPPING FOB TO SITE