Step 1: First please download the latest version of the camera management software from

www.rewiresecurity.co.uk. Once downloaded there will be a choice of two folders 'Driver' and Software'.

Step 2: Now connect the RX-5 to the computer using the mini USB cable provided with the camera and

turn the camera on. If you are using Windows 7 or 8 the drivers will be installed automatically as shown in

the screen shot below. Once the install is complete click close.

Step 3: Now go to the desktop your computer and right click the 'My Computer' icon and select 'Mange'

as shown in the screen shot below.

Step 4: Once you have opened the 'Management' application select 'Device Manager' in the 'System

Tools' menu as shown in the screen shot below.

Step 5: Under 'Other devices' item in the 'Device Manager' menu. Click the 'Other Devices' and you will

see there is a new device named 'Amba Simple Class' as shown in the screen shot below.

Step 6: Right click the “Amba Simple Class”, and select 'Update Driver Software' , as shown in the screen

shot below.

Step 7: Now select 'Browse my computer for driver software'. as shown in the screen shot below.

Step 8: Now navigate to the downloaded folder 'USB SOFTWARE', select the 'Driver' and select 'OK'.

Step 9: Click 'Next' to install the RX-5 Camera drivers.

Step 10: If you get a pop up like shown in the screen shots below click 'Install this driver anyway'

Step 11: Now when you go back to device manager the camera will show that it has been installed

correctly as per the screen shot below.

Step 12: Now that the USB driver has been installed successfully, go back to the downloaded software

files and run the camera management software.

Step 13: Once you have opened the software select the 'Connect Device' button and confirm 'OK'.

Step 14: Now enter the cameras password (default password 00000000)

Step 15: Once the password has been entered select 'Login Device'

Step 16: Then select 'Read Device ID' and select 'OK'.

Step 17: You can set a custom device ID by entering the new ID in the 'Set Device ID' & 'Police ID'.

Step 18: To access the recorded data on the camera select the button marked 'U Disk Mode' and confirm

'OK'. One in 'U DIsk Mode' you will be able to access the recorded data as a 'Mass Storage Device' as

shown in the final screen shot below.