STEEL PANEL FORMS

Pool Kit Specialists

Steel Panel Forms

Cost effective

Unlimited designs

Simple installation

Strengthens pool

Increases profits

Our steel panel form system allows builders to incorporate custom steps, benches, sun ledges, sun-

steps and spas at a greatly reduced cost compared to traditional custom steel products. These cost

effective custom features will help differentiate your products and increase your profits.

Custom is Our Standard

One CUSTOM e r at a Time

INSTALLATION PROCESS

Fasten panel forms to perimeter panels using pre-

punched bolt holes. Secure forms with drive

stakes. Pour a 6” footer inside each cavity.

Assemble Panel Forms 1

Backfill with gravel, stone or sand. Leave 2” to

accommodate finishing material. Face-mount

liner track 1/4” higher than tread height.

Backfill & Liner Track 2

Cover liner track with tape. Finish off tops of

treads and benches with concrete or grout mix.

Finish Treads & Benches 3

Tape steel-cement seams. Foam tops of treads &

benches with 1/4” high density material. Optional

1/8” wall foam can be installed on risers & walls.

Foam Treads & Benches 4