STEEL PANEL FORMS
Pool Kit Specialists
Steel Panel Forms
Cost effective
Unlimited designs
Simple installation
Strengthens pool
Increases profits
Our steel panel form system allows builders to incorporate custom steps, benches, sun ledges, sun-
steps and spas at a greatly reduced cost compared to traditional custom steel products. These cost
effective custom features will help differentiate your products and increase your profits.
Custom is Our Standard
One CUSTOM e r at a Time
INSTALLATION PROCESS
Fasten panel forms to perimeter panels using pre-
punched bolt holes. Secure forms with drive
stakes. Pour a 6” footer inside each cavity.
Assemble Panel Forms 1
Backfill with gravel, stone or sand. Leave 2” to
accommodate finishing material. Face-mount
liner track 1/4” higher than tread height.
Backfill & Liner Track 2
Cover liner track with tape. Finish off tops of
treads and benches with concrete or grout mix.
Finish Treads & Benches 3
Tape steel-cement seams. Foam tops of treads &
benches with 1/4” high density material. Optional
1/8” wall foam can be installed on risers & walls.
Foam Treads & Benches 4