stealth - home - emergency services show 2018 - the … · the stealth tactical body armour serves...
TRANSCRIPT
The ultimate protection for professionals
BS EN ISO 9001 : 2008Q09717
Q09717
As one of the most versatile and popular vests in the Jack Ellis range, the Stealth Tactical Body Armour serves our customers in a number of operational requirements. As a platform for both soft and hard armour protection, this vest can provide a defence against handguns and high end rifles. The vest can be worn covertly under clothing as discreet security, or worn overtly as a visual deterrent or as part of a uniform.
We at Jack Ellis can accommodate each customer’s operational requirements by tailoring to their individual needs through the addition of added features, including badges, radio holsters, pockets and pouches, reflective tapes, or through the addition of a modular webbing system for them to customise their own vest. A popular choice with Special Force Teams, Maritime Security, Close Protection, and Press.
The Stealth Tactical benefits from an active internal sweat management system to actively reduce core temperature by allowing air to flow through the structure and moisture to run downwards and away. In cold weather the 3D mesh helps to retain heat and keep the wearer warm.
Jack Ellis supports a full range of NIJ and Certified Home Office protection levels for each operational requirement, and able to manufacture this body armour to meet the needs of our customer’s individual specification. This vest can be made to be Handgun and rifle bullet resistant, stab resistant, needle / spike resistant, and fragmentation resistant, or a combination of all of these to meet each customers wishes.
STEALTHTACTICAL
BODYARMOUR
U K M A D E B O D Y P R O T E C T I O N
As one of the most versatile and popular vests in the Jack Ellis range, the Stealth Tactical Body Armour serves our customers in a number of operational requirements. As a platform for both soft and hard armour protection, this vest can provide a defence against handguns and high end rifles. The vest can be worn covertly under clothing as discreet security, or worn overtly as a visual deterrent or as part of a uniform.
We at Jack Ellis can accommodate each customer’s operational requirements by tailoring to their individual needs through the addition of added features, including badges, radio holsters, pockets and pouches, reflective tapes, or through the addition of a modular webbing system for them to customise their own vest. A popular choice with Special Force Teams, Maritime Security, Close Protection, and Press.
The Stealth Tactical benefits from an active internal sweat management system to actively reduce core temperature by allowing air to flow through the structure and moisture to run downwards and away. In cold weather the 3D mesh helps to retain heat and keep the wearer warm.
Jack Ellis supports a full range of NIJ and Certified Home Office protection levels for each operational requirement, and able to manufacture this body armour to meet the needs of our customer’s individual specification. This vest can be made to be Handgun and rifle bullet resistant, stab resistant, needle / spike resistant, and fragmentation resistant, or a combination of all of these to meet each customers wishes.
STANDARD VEST FEATURES
Ergonomically designed for enhanced comfort ✓
Made in the UK ✓
Adjustable shoulders and waist for tailored fit ✓
Active 3D mesh ventilation sweat management system ✓
Bottom loading Hard Armour rifle plate pockets ✓
Reinforced shoulder straps to prevent tampering ✓
Made using military grade fabrics ✓
Waterproof and removable soft armour panels ✓
Advanced high tensile Velcro closures. ✓
Choice of colours and fabrics ✓
OPTIONAL VEST FEATURES
Identification badges and Velcro patchesStorage pouches and pocketsInterchangeable additional coversRear grab handle
HARD ARMOUR UPGRADE OPTIONS
All Jack Ellis Tactical vests can be upgraded using our Jack Ellis Legacy Hard Armour Plates. NIJ levels III and IV
+44 (0)1575 570 222 | www.jackellis.co.uk | [email protected]
Jack Ellis body armour is manufactured in our UK based factory, and is rigorously tested by accredited independent sources to conform to UK and international standards. Jack Ellis uses fabrics woven in-house to make outer covers to ensure quality and longevity. Other levels of protection are available.
All information is supplied to the best of our knowledge at the time of going to print.
GENERAL INFORMATION
SPECIFICATIONS PROTECTIVE AREACOVERAGE (SIZE L) 0.28 m2 FRONT AND REAR ✓
OUTER FABRICS Polycotton SIDES ✓
SIZE OPTIONS U.S NIJ LEVEL IIIA UK HG1 KR1 SP1 UK HG2 KR2 SP2WEIGHT (Size L) 2.17 kg 2.56 kg 3.28 kg
PACK THICKNESS 5mm 12.7mm 13.5mm
AERIAL DENSITY 5.6kg/m2 7.0 kg/m2 9.4 kg/m2
UNISEX SMALL - XXL ✓ ✓ ✓
XXXL & BESPOKE ✓ ✓ ✓
REGULAR AND LONG ✓ ✓ ✓
FEMALE DESIGN ✓
PERFORMANCE9mm FMJ ✓ ✓ ✓
.357 MAGNUM ✓ ✓ ✓
.44 MAGNUM ✓ ✓
PLATE UPGRADE ✓ ✓
KNIFE (Energy) 5 joules 24 joules 33 joules
SPIKE (Energy) 24 joules 33 joules
BLUNT TRAUMA ✓ ✓
FRAGMENTATION V50 ✓ ✓ ✓
WARRANTYARMOUR PACK 5 Year 10 Year 10 Year
OUTER CARRIER 1 Year 1 Year 1 Year
SIZING
CHEST WAIST (INCHES) (CM) (INCHES) (CM)
XSMALL 33-35 87-91 27-29 70-75
SMALL 36-38 92-97 30-32 76-81
MEDIUM 39-41 98-103 33-35 84-89
LARGE 42-44 104-109 36-38 91-96
XL 45-47 114-120 39-41 99-104
XXL 48-50 122-127 42-44 107-112
XXXL 51-53 129-134 45-47 114-119 Jack Ellis body armour is manufactured in our UK based factory, and is rigorously tested by accredited independent sources to conform to UK and international standards. Jack Ellis uses fabrics woven in-house to make outer covers to ensure quality and longevity. Other levels of protection are available.
All information is supplied to the best of our knowledge at the time of going to print.
+44 (0)1575 570 222 | www.jackellis.co.uk | [email protected]
GENERAL INFORMATION
SPECIFICATIONS PROTECTIVE AREACOVERAGE (SIZE L) 0.28 m2 FRONT AND REAR ✓
OUTER FABRICS Polycotton SIDES ✓
SIZE OPTIONS U.S NIJ LEVEL IIIA UK HG1 KR1 SP1 UK HG2 KR2 SP2WEIGHT (Size L) 2.17 kg 2.56 kg 3.28 kg
PACK THICKNESS 5mm 12.7mm 13.5mm
AERIAL DENSITY 5.6kg/m2 7.0 kg/m2 9.4 kg/m2
UNISEX SMALL - XXL ✓ ✓ ✓
XXXL & BESPOKE ✓ ✓ ✓
REGULAR AND LONG ✓ ✓ ✓
FEMALE DESIGN ✓
PERFORMANCE9mm FMJ ✓ ✓ ✓
.357 MAGNUM ✓ ✓ ✓
.44 MAGNUM ✓ ✓
PLATE UPGRADE ✓ ✓
KNIFE (Energy) 5 joules 24 joules 33 joules
SPIKE (Energy) 24 joules 33 joules
BLUNT TRAUMA ✓ ✓
FRAGMENTATION V50 ✓ ✓ ✓
WARRANTYARMOUR PACK 5 Year 10 Year 10 Year
OUTER CARRIER 1 Year 1 Year 1 Year
SIZING
CHEST WAIST (INCHES) (CM) (INCHES) (CM)
XSMALL 33-35 87-91 27-29 70-75
SMALL 36-38 92-97 30-32 76-81
MEDIUM 39-41 98-103 33-35 84-89
LARGE 42-44 104-109 36-38 91-96
XL 45-47 114-120 39-41 99-104
XXL 48-50 122-127 42-44 107-112
XXXL 51-53 129-134 45-47 114-119 Jack Ellis body armour is manufactured in our UK based factory, and is rigorously tested by accredited independent sources to conform to UK and international standards. Jack Ellis uses fabrics woven in-house to make outer covers to ensure quality and longevity. Other levels of protection are available.
All information is supplied to the best of our knowledge at the time of going to print.
+44 (0)1575 570 222 | www.jackellis.co.uk | [email protected]
Jack Ellis is a trading name of J & D Wilkie Ltd part of the Wilkie Group
The ultimate protection for professionals
Jack Ellis Body Protection, Marywell Works, Kirriemuir, Angus, Scotland, UK, DD8 4BJ
+44 (0) 1575 570 222 • www.jackellis.co.uk • [email protected] K M A D E B O D Y P R O T E C T I O N