star wars fang fighter print-in- place · 2021. 2. 2. · the fang fighter is a mandalorian...
TRANSCRIPT
2.37 hrs
1 pcs
f
0.07 mm
k
0.40 mm
h
1
4.00 g
d
Prusa MINI/ MINI+
Summary
The Fang Fighter is a mandalorian starfighter first seen in Star WarsRebels. This is a replica with rotating print-in-place wings. Its scale shouldbe somewhere around 1:270. I do not know the canonical size of this ship.(Wookiepedia says its 6m, but thats just way to small.)
D DanielAlex
Star Wars FangFighter print-in-place
VIEW IN BROWSER
updated 2. 2. 2021 | published 2. 2. 2021
Print Files (.gcode) F33D DOWNLOAD ALL FILES
4.2 MB
2.37 hrs f 0.07 mm k 0.40 mm h PLA 3.60 g d PrusaMINI /MINI+
updated 2. 2. 2021F33D
Model Files (.stl, .3mf, .obj, .amf) F33D DOWNLOAD ALL FILES
462.0 KBupdated 2. 2. 2021
F33D
1.8 MBupdated 2. 2. 2021
F33D
Toys & Games > Vehicles
starwars starfighter rebels mandalorian fang
If you use the .3mf-file, everything should already be set up properly.
For the stl-file: Rotate the model by -90° along the x-axis so that the nosepoints up. I used 0.07mm layer height. Supports on buildplate only couldwork, but I have not tested it. I painted on the supports manually.
I do not recommend changing the scale.
License
This work is licensed under a Creative Commons (4.0 International License)
star_wars_fang_fighter_007mm_pla_mini_2h22m.gcode
star_wars_fang_fighter.3mf
star_wars_fang_fighter.stl
Attribution-NonCommercial
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition