stair robot stairclimbers sr17501
TRANSCRIPT
-
7/24/2019 Stair Robot Stairclimbers SR17501
1/2
Hercules Complete Lifting SolutionsUnit 2, 18 Hotham Parade
ARTARMON NSW 2064Toll Free: 1800 649 603
Ph: (02) 9966 5600 Fax: (02) 9966 [email protected]
STAIR ROBOTSTAIRCLIMBERS
SR1750
The SR1750 is designed to carry unit loads weighing up to 1000kg up and down stairs. The accessory equipment,stair approach ramp, manoeuvring dolly and the turntable have been designed to assist the movement up toand onto the stairs and the take off from the top and journey to the final destination.
The SR1750 is equipped with a hydraulic levelling platform which makes it possible to transport fragile loads inhorizontal position throughout operation.
The SR1750 not only reduces the number of men required for a professional move but also greatly reduces thehazards involved in a traditional stair move .
SPECIFICATIONS SR1750 Maximum capacity (kg) 1000
Speed (mtr/min) 3
Maximum angle (deg) 45
Length (mm) 1185
Width (mm) 720
Height (mm) 320Length with loading ramp (mm) 1180
Width with loading ramp (mm) 720
Drive motor capacity (kw/Hp) 0.75/1
Drive motor power (v) 220 or 110
Hydraulic motor capacity (kw/Hp) 0.375/0.5
Hydraulic motor power (v) 220 or 110Weight (kg) 175
-
7/24/2019 Stair Robot Stairclimbers SR17501
2/2
Hercules Complete Lifting SolutionsUnit 2, 18 Hotham Parade
ARTARMON NSW 2064Toll Free: 1800 649 603
Ph: (02) 9966 5600 Fax: (02) 9966 [email protected]
STAIR ROBOTSTAIRCLIMBERS
SR1750
Drive: Driving power is provided by a minimal noise, single phase AC motor with thermal cut out and is transmitted to thedrive axle by a built-on worm-gearbox. The worm wheel reduction forms an effective brake if the current isinterrupted for any reason.
Hydraulic levelling platform: The hydraulic levelling platform is operated by aSingle phase, low noise AC motor with thermal cut out.A hydraulic pump is built directly onto the motor.The lowering speed of the platform can be adjustedby the descent adjuster.
Control: The robot is controlled by a low voltage (24V) manuallyoperated 4-button switchbox connected to the stairrobot with a 2 meter remote control cable.
Loading winch and ramp: The winch is designed to fit into the lifting platform of the SR1750. With the additional winchand ramp a load can be hand pulled onto the SR1750 with a minimum of effort.
Dolly: A heavy duty dolly is available for handling long and bulkyobjects. The dolly is used to transport the (loaded) SR1750 toand on the stairs and is used at the landing.
The dolly is constructed of square steel fittings with four heavy
duty swivel wheels for easy movements.An extendable frame can be pulled out to increase stabilitywhile driving the SR1750 on the dolly. The lead off ramp is usedto connect the dolly with the stairway.