specify lyon. locker specifiersâ€™ guide - building materials

LS092109

LOCKERSPECIFIERS’ GUIDE

Specify Lyon.

10 51 13/LYOBuyLine 4449

Lyon Workspace ProductsP.O. Box 671Aurora, IL 60507-0671

Telephone: 630/892-8941Literature: 800/323-0096Customer Service: 800/323-0082Fax: 800/367-6681

email: [email protected]

Specify Lyon! 2 lyonworkspace.com

Antimicrobial Performance

Tests conducted on epoxy coated stainless steel

Lyon antimicrobial lockers are finished in an advanced powder coating technology that inhibits mold, bacterial and odor build-up on locker surfaces, as well as the touch transfer of microbes on locker handles and doors.

Here’s how it works: Any moisture triggers the controlled release of powerful silver ions to provide superior antimicrobial protection

for decades. The antimicrobial compound is completely inorganic, less toxic than ordinary table salt, less irritating than talcum powder, and has been approved for medical devices and food contact applications.

We look at it this way: The cost is small. The peace of mind, immeasurable.

Antimicrobial finish lockers are available from stock in light gray (GY655) in the following sizes:

Single Tier: 15"w x18"d x 72"h

Single Tier: 18"w x18"d x 72"h

Double Tier: 12"w x12"d x 36"h

Double Tier: 12"w x18"d x 36"h

Antimicrobial Finish Fights bacterial and mold growth!

Application Examples:

School Locker Rooms School Corridors

Food Processing Facilities Healthcare Environments

Lyon’s Premier color selections and/or a computerized match to your custom color offer a virtually endless

combination of choices including two tone effects. Our preparation and finishing procedures deliver a superior

powder coat surface, highly resistant to chipping, cracking and corrosion, to create a lasting impression

for your locker installation.

Note: All color

chips approximate

the actual color as

closely as possible.

For a more precise

color match, request a free 601C color chart

showing Lyon’s 30 premier colors.

Premier Colors

s p e c i f y l y o n ! Lifetime Product

Warranty

Lyon lockers are warranted against defects in material and workmanship for the life of the

product, when used in accordance with

manufacturer’s specifications and/or

operating instructions.*

(This warranty applies to the original purchaser only, and

purchaser’s sole remedy under this warranty is limited to replacement

or repair of the product and

specifically excludes consequential, incidental or any other damages directly or indirectly resulting from failure or loss of use of Lyon

products).

* Lock warranties limited.

800-323-0082 3 Specify Lyon!

Most Popular SizesSingle Tier (per opening)

9", 12", 15", 18" W12", 15" 18", 21", 24" D

60", 72" HDouble Tier (per opening)

9", 12", 15", 18" W12", 15" 18", 21", 24" D

30", 36" HTriple Tier (per opening)

9", 12", 15" W12", 15" 18", 21" D

20", 24" HFour Tier (per opening)

12", 15" W12", 15" 18", 21" D

15", 18" HFive & Six Tier (per opening)

12", 15" W12", 15" 18", 21" D

12" HAdd 6” to height for legs.

Spec Summary• 16 ga. door and frames• 24 ga. body parts• One piece door• Full loop type hinges• All metal locking system• 40,000 psi zinc alloy

handles• Lustrous powder coat finish• Built in padlock loop• Built in key locks or combi-

nation locks are available• Fully assembled construc-

tion optional

Quiet PlusEliminating metal to metal contact, all Lyon locker doors are fitted with nylon lockbar guides to reduce clanging and provide smoother, quieter opera-tion. In addition to quieter lock bars, Lyon Quiet-Plus locker doors include a sound deadening door panel. The resulting combi-nation minimizes noise levels caused by opening and closing locker doors. LYON strongly recommends wall and/or

floor anchoring for all locker installations.

Pull Handles, with built-in padlock loop, are standard on multiple tier lockers. Optional roll point catch available.

Single Tier Quiet Lockers Double Tier Quiet Lockers Multiple Tier Lockers Triple Tier Quiet Lockers

Tamper Guard Handles have a slim profile, clear access to locks and built in padlock loop. Available on single, double, triple-tier lockers.

Single Point Latching System operates with no moving parts. May be subject to additional charge. Available on single, double, and triple tier lockers. Not available on 9" wide lockers.

Recessed Handles with finger lift offer added safety and security, clean flush front appearance. Available on single, double, and triple tier lockers.

Hand

le T

ypes

Turn Handles have built in padlock attachments, and heavy duty, 3-point locking mechanisms that fully engage the frame. Available on single, double, and triple tier lockers.


Lyon Solutions to Locker Abuse

Qual

ity F

eatu

res

• Nano rollers ride effortlessly up the door jambs and drop into place, providing up to 3-1/2 times the resistance to break-ins compared to other locker latching systems. (Note: for demonstration purposes, top nano roller has been lowered into close proximity with locker handle.) New nylon lockbar guide ensures lockbar alignment and eliminates metal-to-metal contact.

• Single Point latches are designed for built-in locks with wraparound technology or padlocks.

• The door frames are formed by overlapping and welding the junction between the hori-zontal and vertical members to form a rigid unitized structure that fully frames the door.

• Standard hinges are full loop design and provide more strength than larger butt type hinges.

• The full loop hinges are inserted through slots in the door and frame to maintain alignment and increase attachment strength.

• Door frames include integral full height 16 gauge door strikes to reinforce door edges.

• One piece doors formed from 16 or 14 gauge prime, high grade class 1 steel.

• Three latch points on single tier doors and two on double and triple tier doors.

• One piece Nickel plated 40,000 psi zinc alloy recessed handle pockets add strength to the handle area and eliminate the vulnerable seams of formed handles.

• Soft rubber bumpers, at door jamb locations, cushion door slams.

High security Lyon lockbar, installed.

Lockbar cHanneL

HigH tecH nano

roLLers

nyLon guide

pad-Lock Hasp

recessed Locker HandLe

SPECSSPECS CSI formatted specifications & detailed product information are available at www.lyonworkspace.com

Standard Lockersf o r q u a l i t y & v a l u e !


Lyon Heavy Duty Lockers are also available with:

• Diamond shaped perforations on doors and sides for superior ventilation.

• All-welded construction for superior strength and durability.

Single Tier Quiet Lockers Double Tier Quiet Lockers Triple Tier Quiet Lockers Multiple Tier Lockers (4, 5, and 6 Tier)


9", 12", 15", 18" W12", 15" 18", 21", 24" D


9", 12", 15", 18" W12", 15" 18", 21", 24" D


9", 12", 15" W12", 15" 18", 21" D


12", 15" W12", 15" 18", 21" D


12", 15" W12", 15" 18", 21" D


Quiet PlusEliminating metal to metal contact, all Lyon locker doors are fitted with nylon lockbar guides to reduce clanging and provide smoother, quieter opera-tion. In addition to quieter lock bars, Lyon Quiet-Plus locker doors include a sound deadening door panel. The resulting combi-nation minimizes noise levels caused by opening and closing locker doors.

Lyon Solutions to Locker Abuse

Qual

ity F

eatu

res

• Nano rollers ride effortlessly up the door jambs and drop into place, providing up to 3-1/2 times the resistance to break-ins compared to other locker latching systems. (Note: for demonstration purposes, top nano roller has been lowered into close proximity with locker handle.) New nylon lockbar guide ensures lockbar alignment and eliminates metal-to-metal contact.

• Single Point latches are designed for built-in locks with wraparound technology or padlocks.

• The door frames are formed by overlapping and welding the junction between the hori-zontal and vertical members to form a rigid unitized structure that fully frames the door.

• Standard hinges are full loop design and provide more strength than larger butt type hinges.

• The full loop hinges are inserted through slots in the door and frame to maintain alignment and increase attachment strength.

• Door frames include integral full height 16 gauge door strikes to reinforce door edges.

• One piece doors formed from 16 or 14 gauge prime, high grade class 1 steel.

• Three latch points on single tier doors and two on double and triple tier doors.

• One piece Nickel plated 40,000 psi zinc alloy recessed handle pockets add strength to the handle area and eliminate the vulnerable seams of formed handles.

• Soft rubber bumpers, at door jamb locations, cushion door slams.


Lockbar cHanneL

HigH tecH nano

roLLers

nyLon guide

pad-Lock Hasp


Spec Summary• 14 gauge door• Full loop type hinges• 16 gauge frame• All metal locking system• 16 gauge body parts with

18 gauge backs• One piece door• 40,000 psi zinc alloy

handles• Lustrous powder coat finish• Built in padlock loop• Built in key locks or combi-

nation locks are available• All-welded construction

optional

LYON strongly recommends wall and/or floor anchoring for all locker installations.

Pull Handles, with built-in padlock loop, are standard on multiple tier lockers. Optional roll point catch available.


Single Point Latching System operates with no moving parts. May be subject to additional charge. Available on single, double, and triple tier lockers. Not available on 9" wide lockers.


Hand

le T

ypes

Turn Handles have built in padlock attachments, and heavy duty, 3-point locking mechanisms that fully engage the frame. Available on single, double, and triple tier lockers.

CSI formatted specifications & detailed product information are available at www.lyonworkspace.comSPECSSPECS

Heavy Duty LockersF o r d u r a b i l i t y a n d V a l u e !

800-323-0082 5 Specify Lyon!

For

Maximum

Strength

and

Security!

Full length piano-hinges maintain positive door alignment, prolong smooth operation.

M.I.G. welded bottom channelscreate solid footing beneath each locker body and strengthens locker bottoms. Optional 4" high bases (not shown) afford additional clearance below door openings, prevent accumulations of dust underneath.

All lockers shown with optional diamond perforations.

Single Tier Lockers Multiple Tier Lockers (4, 5, and 6 Tier)

Double Tier Lockers Triple Tier Lockers

Lock

er Fe

atur

es


12", 15", 18", 24" W12", 15" 18", 22" D


12", 15", 18" W12", 15" 18", 22" D


12", 15" W12", 15" 18", 22" D


12", 15" W12", 15" 18", 22" D

15"HFive & Six Tier (per opening)

12", 15" W12", 15" 18", 22" D


Lyon

Loc

kbar

Nano rollers ride effortlessly up the door jambs and drop into place, providing up to 3-1/2 times the resistance to break-ins compared to other locker latching systems. (Note: for demon-stration purposes, top nano roller has been lowered into close proximity with locker handle.) New nylon lockbar guide ensures lockbar alignment and eliminates metal-to-metal contact



Spec Summary• 16 gauge body parts,

18 gauge backs• 14 gauge doors• Magnetic latch, no moving

parts• Optional multi point

latching with high security lockbar

• Full height hinge• Powder coat finish• 1” door thickness for added

strength• Security Vents• Single piece top, bottom

and back for each locker group

• Multiple tier lockers have nickel plated recessed handles with single point latching


Single Point Latching System operates with no moving parts. Available on single, double, and triple tier lockers.


Hand

le T

ypes The Lyon Choice:

Single Point Latch(no moving parts) is securely welded to locker body providing firm seat for repetitive door openings and closings. Door is held closed magnetically.

Three Point Latch Multi-point locking mechanism with Lyon‘s new lockbars add the convenience of closing the doors in the locked position. Available with either Tamper Guard handles or recessed handles. Both handles include padlock attach-ments and accept built-in key or combination locks.


Lockbar cHanneL

HigH tecH nano

roLLers

nyLon guide

pad-Lock Hasp



Integrated Frame All-Welded Lockers


Pull Handles, with built-in padlock loop, are standard on mul-tiple tier lockers. Optional roll point catch available.

Turn Handles have built in pad-lock attachments, and heavy duty, 3-point locking mechanisms that fully engage the frame. Standard on single, double, and triple tier lockers.

Han

dle

Type

sMost Popular SizesSingle Tier (per opening)

9", 12", 15", 18", 24" W12", 15" 18", 21", 24" D


9", 12", 15", 18", 24" W12", 15" 18", 21", 24" D


9", 12", 15" W12", 15" 18", 21" D


12", 15" W12", 15" 18", 21" D


12", 15" W12", 15" 18", 21" D

12" HEight & Nine Tier

(per opening)

12", 15" W12", 15" 18" D

8", 9" HAdd 6” to height for legs.

Spec Summary

Knocked Down• 13 gauge expanded metal

door• 16 gauge frame• 13 gauge expanded metal

sides• Lustrous powder coat finish• Chrome plated turn handles• All metal locking systems• Fully assembled construction

optional• Built in padlock loop• Built in key locks or

combination locks are also available

All-Welded• 13 gauge expanded metal


sides• Baked on enamel finish• Chrome plated turn handles• All metal locking systems• All seams and Joints welded

for rigidity• Built in padlock loop• Built in key locks or

combination locks are also available

• 16 gauge body parts with 18 gauge backs

• Full loop type hinges

All doors on single, double and triple tier lockers feature bright, chrome plated handles with built in padlock attachment. Number plates mount above handle, and built in key locks or combination locks may be added to the right of the handle.

Expanded metal K.D. lock-ers are available as starter units, or as two wide add-on units. Add-on must be attached to a starter unit or another add-on unit.

For Maximum Ventilation

and Visibility!

Single Tier Lockers Multiple Tier Lockers(4, 5, 6, 8 and 9 Tier)

Double Tier Lockers Triple Tier Lockers


Expanded Metal Lockers

800-323-0082 7 Specify Lyon!

For Maximum Storage

and Ventilation of Bulky

Athletic Gear!

Deluxe Collegiate Lockers offer additional security for special equipment or assigned gear. 18" high interior compartment bench with padlock hasp. Upper compartment door may also be equipped with built-in key or combi-nation lock.Deluxe Collegiate Lockers with Doors offer the same design and construc-tion features as above, plus the added security of a reinforced door.

Collegiate Lockers are designed to provide easy access to equipment and uniforms in team locker rooms. Shelf included.Collegiate Lockers with Doors are recommended for storing bulky uniforms of hockey and football teams, offering up to 36" wide compartments. Reinforcing K-brace welded to each door frame for added strength and proper door align-ment.

All doors on single, double and triple tier lockers feature bright, chrome plated handles with built in padlock attachment. Number plates mount above handle, and built in key locks or combi-nation locks may be added to the right of the handle.

Spec Summary

All-Welded• All seams and Joints welded

for rigidity• 16 gauge body parts with

18 gauge backs• Full loop type hinges• 13 gauge expanded metal


sides• All metal locking systems• Chrome plated turn handles• Powder coat finish

Knocked Down• 13 gauge expanded metal


sides• All metal locking systems• Chrome plated turn handles• Powder coat finish• Fully assembled construction

optional



24", 33", 36" W18", 21" 24" D

60", 72" HAdd 6” to height for legs.



Collegiate Lockersa l l - w e l d e d & k n o c k e d d o w n


Locker Benches

Anodized Aluminum Design Combines sleek, contemporary look with strength and durability. Plus, the versatility of 4 popular sizes with adjustable pedestals. Rustproof, anodized aluminum is light, yet incredibly strong and easy to maintain in almost any environment. One piece bench stands are secured to pedestal base with adjustable clamps. Rounded edges and center traces provide comfortable, skid resistant seating. Use as portable bench or install as a fixed position unit.

Plastic Laminate with Enameled Steel Pedestal Design 12" wide x 18" high, and 3' to 12' long in 1 ft. increments.

Laminated Hardwood with Enameled Steel Pedestal Design Selected hardwoods provide strength and beauty on painted steel pedestals with rust-resistant durability. Eight different sizes 91⁄2" deep x 18" high, from 3 to 10 feet in length in 1 foot increments, deliver all the versatility, styling and performance required for varying floor plans and locker arrangements.

Heavy Duty Cast Iron Pedestal DesignProvides solid footing for plastic laminate or laminated hardwood tops.


A. Duplex Standard Lockers conserve floor space by providing two individual lockers in each frame. Each compartment is 71⁄2" wide, doors are hinged in center. Each compartment has a hat shelf and single prong coat hooks.

B. Two Person Lockers are only 15" wide, with two full length coat compartments and two separate compartments at top. Doors are hinged in the center allowing simultane-ous access for both users.

W" x D" x H" 15 x 15 x 60 15 x 18 x 60 15 x 21 x 60 15 x 15 x 72 15 x 18 x 72 15 x 21 x 72

Locker Sizes (per opening)

Locker Sizes (per opening)

A. B. W" x D" x H" 15 x 12 x 60 15 x 15 x 60 15 x 18 x 60 15 x 21 x 60 15 x 12 x 72 15 x 15 x 72 15 x 18 x 72 15 x 21 x 72

Duplex Standard

Two Person

Shown with formed steel doors

2-Person1-Person 3-Person

Cubbie Lockersfor Kids!Lyon Cubbies for Kids meet the storage needs of youngsters in day care centers, pre-schools and elementary schools, while enhancing the colorful decor that is so popular in early childhood learning environments. Choose from 3 different models that accommodate from one to three children each. Standard Lyon Cubbies for Kids are available 15" deep, and 12", 15" and 18" wide. Our Cubbies are constructed from heavy duty 16 ga. steel (18 ga. backs) for durability — and feature our special antimicrobial powder paint finish that fights bacterial growth and corrosion on locker surfaces in the classroom.

These lockers are also available with 14 ga. formed steel doors (single through nine tier models).

Angle Iron LockersLyon Angle Iron lockers are available in 1-6 tier models. They feature our famous all-welded construction throughout for exceptional strength and durabil-ity — PLUS 1" x 1" x 1/8" angle iron frame construction! Heavy duty 13 ga. expanded metal panels, providing 73% ventilation, or 16 ga. solid steel panels, are then welded to the angle iron door frames.An additional handle panel is welded to the center span of the door for even greater strength. Standard sides are constructed of 13 ga. expanded metal, or 16 ga. solid steel, with 18 ga. cold rolled steel backs.

Aluminum Pedestals are sold separately, and can be used with wood tops for free standing or moveable installations.

Specialty Lockers

specify lyon. locker specifiersâ€™ guide - building materials

Documents